From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,tjmercier@google.com,stable@vger.kernel.org,ryncsn@gmail.com,quic_charante@quicinc.com,kaleshsingh@google.com,jaroslav.pulchart@gooddata.com,hdanton@sina.com,yuzhao@google.com,akpm@linux-foundation.org
Subject: [merged mm-hotfixes-stable] mm-mglru-fix-underprotected-page-cache.patch removed from -mm tree
Date: Tue, 12 Dec 2023 17:20:57 -0800 [thread overview]
Message-ID: <20231213012058.20B67C433C7@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/mglru: fix underprotected page cache
has been removed from the -mm tree. Its filename was
mm-mglru-fix-underprotected-page-cache.patch
This patch was dropped because it was merged into the mm-hotfixes-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Yu Zhao <yuzhao@google.com>
Subject: mm/mglru: fix underprotected page cache
Date: Thu, 7 Dec 2023 23:14:04 -0700
Unmapped folios accessed through file descriptors can be underprotected.
Those folios are added to the oldest generation based on:
1. The fact that they are less costly to reclaim (no need to walk the
rmap and flush the TLB) and have less impact on performance (don't
cause major PFs and can be non-blocking if needed again).
2. The observation that they are likely to be single-use. E.g., for
client use cases like Android, its apps parse configuration files
and store the data in heap (anon); for server use cases like MySQL,
it reads from InnoDB files and holds the cached data for tables in
buffer pools (anon).
However, the oldest generation can be very short lived, and if so, it
doesn't provide the PID controller with enough time to respond to a surge
of refaults. (Note that the PID controller uses weighted refaults and
those from evicted generations only take a half of the whole weight.) In
other words, for a short lived generation, the moving average smooths out
the spike quickly.
To fix the problem:
1. For folios that are already on LRU, if they can be beyond the
tracking range of tiers, i.e., five accesses through file
descriptors, move them to the second oldest generation to give them
more time to age. (Note that tiers are used by the PID controller
to statistically determine whether folios accessed multiple times
through file descriptors are worth protecting.)
2. When adding unmapped folios to LRU, adjust the placement of them so
that they are not too close to the tail. The effect of this is
similar to the above.
On Android, launching 55 apps sequentially:
Before After Change
workingset_refault_anon 25641024 25598972 0%
workingset_refault_file 115016834 106178438 -8%
Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/mm_inline.h | 23 ++++++++++++++---------
mm/vmscan.c | 2 +-
mm/workingset.c | 6 +++---
3 files changed, 18 insertions(+), 13 deletions(-)
--- a/include/linux/mm_inline.h~mm-mglru-fix-underprotected-page-cache
+++ a/include/linux/mm_inline.h
@@ -232,22 +232,27 @@ static inline bool lru_gen_add_folio(str
if (folio_test_unevictable(folio) || !lrugen->enabled)
return false;
/*
- * There are three common cases for this page:
- * 1. If it's hot, e.g., freshly faulted in or previously hot and
- * migrated, add it to the youngest generation.
- * 2. If it's cold but can't be evicted immediately, i.e., an anon page
- * not in swapcache or a dirty page pending writeback, add it to the
- * second oldest generation.
- * 3. Everything else (clean, cold) is added to the oldest generation.
+ * There are four common cases for this page:
+ * 1. If it's hot, i.e., freshly faulted in, add it to the youngest
+ * generation, and it's protected over the rest below.
+ * 2. If it can't be evicted immediately, i.e., a dirty page pending
+ * writeback, add it to the second youngest generation.
+ * 3. If it should be evicted first, e.g., cold and clean from
+ * folio_rotate_reclaimable(), add it to the oldest generation.
+ * 4. Everything else falls between 2 & 3 above and is added to the
+ * second oldest generation if it's considered inactive, or the
+ * oldest generation otherwise. See lru_gen_is_active().
*/
if (folio_test_active(folio))
seq = lrugen->max_seq;
else if ((type == LRU_GEN_ANON && !folio_test_swapcache(folio)) ||
(folio_test_reclaim(folio) &&
(folio_test_dirty(folio) || folio_test_writeback(folio))))
- seq = lrugen->min_seq[type] + 1;
- else
+ seq = lrugen->max_seq - 1;
+ else if (reclaiming || lrugen->min_seq[type] + MIN_NR_GENS >= lrugen->max_seq)
seq = lrugen->min_seq[type];
+ else
+ seq = lrugen->min_seq[type] + 1;
gen = lru_gen_from_seq(seq);
flags = (gen + 1UL) << LRU_GEN_PGOFF;
--- a/mm/vmscan.c~mm-mglru-fix-underprotected-page-cache
+++ a/mm/vmscan.c
@@ -4232,7 +4232,7 @@ static bool sort_folio(struct lruvec *lr
}
/* protected */
- if (tier > tier_idx) {
+ if (tier > tier_idx || refs == BIT(LRU_REFS_WIDTH)) {
int hist = lru_hist_from_seq(lrugen->min_seq[type]);
gen = folio_inc_gen(lruvec, folio, false);
--- a/mm/workingset.c~mm-mglru-fix-underprotected-page-cache
+++ a/mm/workingset.c
@@ -313,10 +313,10 @@ static void lru_gen_refault(struct folio
* 1. For pages accessed through page tables, hotter pages pushed out
* hot pages which refaulted immediately.
* 2. For pages accessed multiple times through file descriptors,
- * numbers of accesses might have been out of the range.
+ * they would have been protected by sort_folio().
*/
- if (lru_gen_in_fault() || refs == BIT(LRU_REFS_WIDTH)) {
- folio_set_workingset(folio);
+ if (lru_gen_in_fault() || refs >= BIT(LRU_REFS_WIDTH) - 1) {
+ set_mask_bits(&folio->flags, 0, LRU_REFS_MASK | BIT(PG_workingset));
mod_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + type, delta);
}
unlock:
_
Patches currently in -mm which might be from yuzhao@google.com are
reply other threads:[~2023-12-13 1:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231213012058.20B67C433C7@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=hdanton@sina.com \
--cc=jaroslav.pulchart@gooddata.com \
--cc=kaleshsingh@google.com \
--cc=mm-commits@vger.kernel.org \
--cc=quic_charante@quicinc.com \
--cc=ryncsn@gmail.com \
--cc=stable@vger.kernel.org \
--cc=tjmercier@google.com \
--cc=yuzhao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox