* [PATCH 1/5] arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts
[not found] <20231213173403.29544-1-johan+linaro@kernel.org>
@ 2023-12-13 17:33 ` Johan Hovold
2023-12-14 17:59 ` Konrad Dybcio
2023-12-13 17:34 ` [PATCH 2/5] arm64: dts: qcom: sdm845: " Johan Hovold
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Johan Hovold @ 2023-12-13 17:33 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Krishna Kurapati PSSNV, linux-arm-msm, devicetree,
linux-kernel, Johan Hovold, stable, Vinod Koul
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 0dc0f6da3d43 ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types")
Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 7a9cb0418ac1..8f95779c75fa 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2548,10 +2548,10 @@ gem_noc: interconnect@9680000 {
usb_prim: usb@a6f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
@@ -2622,10 +2622,10 @@ usb_sec: usb@a8f8800 {
"xo";
resets = <&gcc GCC_USB30_SEC_BCR>;
power-domains = <&gcc USB30_SEC_GDSC>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
--
2.41.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 1/5] arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts
2023-12-13 17:33 ` [PATCH 1/5] arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts Johan Hovold
@ 2023-12-14 17:59 ` Konrad Dybcio
0 siblings, 0 replies; 10+ messages in thread
From: Konrad Dybcio @ 2023-12-14 17:59 UTC (permalink / raw)
To: Johan Hovold, Bjorn Andersson
Cc: Andy Gross, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Krishna Kurapati PSSNV, linux-arm-msm, devicetree, linux-kernel,
stable, Vinod Koul
On 12/13/23 18:33, Johan Hovold wrote:
> The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states and to be able to detect disconnect events, which requires
> triggering on falling edges.
>
> A recent commit updated the trigger type but failed to change the
> interrupt provider as required. This leads to the current Linux driver
> failing to probe instead of printing an error during suspend and USB
> wakeup not working as intended.
>
> Fixes: 0dc0f6da3d43 ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types")
> Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
> Cc: stable@vger.kernel.org # 6.5
> Cc: Vinod Koul <vkoul@kernel.org>
> Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/5] arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts
[not found] <20231213173403.29544-1-johan+linaro@kernel.org>
2023-12-13 17:33 ` [PATCH 1/5] arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts Johan Hovold
@ 2023-12-13 17:34 ` Johan Hovold
2023-12-13 18:58 ` Konrad Dybcio
2023-12-13 17:34 ` [PATCH 3/5] arm64: dts: qcom: sdm845: fix USB SS wakeup Johan Hovold
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Johan Hovold @ 2023-12-13 17:34 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Krishna Kurapati PSSNV, linux-arm-msm, devicetree,
linux-kernel, Johan Hovold, stable
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0d2be706505a..97ee02469d69 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4053,10 +4053,10 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -4104,10 +4104,10 @@ usb_2: usb@a8f8800 {
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
--
2.41.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 2/5] arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts
2023-12-13 17:34 ` [PATCH 2/5] arm64: dts: qcom: sdm845: " Johan Hovold
@ 2023-12-13 18:58 ` Konrad Dybcio
0 siblings, 0 replies; 10+ messages in thread
From: Konrad Dybcio @ 2023-12-13 18:58 UTC (permalink / raw)
To: Johan Hovold, Bjorn Andersson
Cc: Andy Gross, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Krishna Kurapati PSSNV, linux-arm-msm, devicetree, linux-kernel,
stable
On 12/13/23 18:34, Johan Hovold wrote:
> The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states and to be able to detect disconnect events, which requires
> triggering on falling edges.
>
> A recent commit updated the trigger type but failed to change the
> interrupt provider as required. This leads to the current Linux driver
> failing to probe instead of printing an error during suspend and USB
> wakeup not working as intended.
>
> Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
> Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
> Cc: stable@vger.kernel.org # 4.20
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Matches ds
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/5] arm64: dts: qcom: sdm845: fix USB SS wakeup
[not found] <20231213173403.29544-1-johan+linaro@kernel.org>
2023-12-13 17:33 ` [PATCH 1/5] arm64: dts: qcom: sc8180x: fix USB DP/DM HS PHY interrupts Johan Hovold
2023-12-13 17:34 ` [PATCH 2/5] arm64: dts: qcom: sdm845: " Johan Hovold
@ 2023-12-13 17:34 ` Johan Hovold
2023-12-13 18:58 ` Konrad Dybcio
2023-12-13 17:34 ` [PATCH 4/5] arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts Johan Hovold
2023-12-13 17:34 ` [PATCH 5/5] arm64: dts: qcom: sm8150: fix USB SS wakeup Johan Hovold
4 siblings, 1 reply; 10+ messages in thread
From: Johan Hovold @ 2023-12-13 17:34 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Krishna Kurapati PSSNV, linux-arm-msm, devicetree,
linux-kernel, Johan Hovold, stable
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 97ee02469d69..97929954cde6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4054,7 +4054,7 @@ usb_1: usb@a6f8800 {
assigned-clock-rates = <19200000>, <150000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
<&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
<&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
@@ -4105,7 +4105,7 @@ usb_2: usb@a8f8800 {
assigned-clock-rates = <19200000>, <150000000>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
<&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
<&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
--
2.41.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 3/5] arm64: dts: qcom: sdm845: fix USB SS wakeup
2023-12-13 17:34 ` [PATCH 3/5] arm64: dts: qcom: sdm845: fix USB SS wakeup Johan Hovold
@ 2023-12-13 18:58 ` Konrad Dybcio
0 siblings, 0 replies; 10+ messages in thread
From: Konrad Dybcio @ 2023-12-13 18:58 UTC (permalink / raw)
To: Johan Hovold, Bjorn Andersson
Cc: Andy Gross, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Krishna Kurapati PSSNV, linux-arm-msm, devicetree, linux-kernel,
stable
On 12/13/23 18:34, Johan Hovold wrote:
> The USB SS PHY interrupts need to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states.
>
> Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
> Cc: stable@vger.kernel.org # 4.20
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Matches ds
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 4/5] arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts
[not found] <20231213173403.29544-1-johan+linaro@kernel.org>
` (2 preceding siblings ...)
2023-12-13 17:34 ` [PATCH 3/5] arm64: dts: qcom: sdm845: fix USB SS wakeup Johan Hovold
@ 2023-12-13 17:34 ` Johan Hovold
2023-12-13 18:59 ` Konrad Dybcio
2023-12-13 17:34 ` [PATCH 5/5] arm64: dts: qcom: sm8150: fix USB SS wakeup Johan Hovold
4 siblings, 1 reply; 10+ messages in thread
From: Johan Hovold @ 2023-12-13 17:34 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Krishna Kurapati PSSNV, linux-arm-msm, devicetree,
linux-kernel, Johan Hovold, stable, Jack Pham, Jonathan Marek
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 3e7048d8ac55..5e46b9ef8642 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3565,10 +3565,10 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -3618,10 +3618,10 @@ usb_2: usb@a8f8800 {
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>,
- <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
--
2.41.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 4/5] arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts
2023-12-13 17:34 ` [PATCH 4/5] arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts Johan Hovold
@ 2023-12-13 18:59 ` Konrad Dybcio
0 siblings, 0 replies; 10+ messages in thread
From: Konrad Dybcio @ 2023-12-13 18:59 UTC (permalink / raw)
To: Johan Hovold, Bjorn Andersson
Cc: Andy Gross, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Krishna Kurapati PSSNV, linux-arm-msm, devicetree, linux-kernel,
stable, Jack Pham, Jonathan Marek
On 12/13/23 18:34, Johan Hovold wrote:
> The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states and to be able to detect disconnect events, which requires
> triggering on falling edges.
>
> A recent commit updated the trigger type but failed to change the
> interrupt provider as required. This leads to the current Linux driver
> failing to probe instead of printing an error during suspend and USB
> wakeup not working as intended.
>
> Fixes: 54524b6987d1 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
> Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
> Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
> Cc: stable@vger.kernel.org # 5.10
> Cc: Jack Pham <quic_jackp@quicinc.com>
> Cc: Jonathan Marek <jonathan@marek.ca>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Matches ds
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 5/5] arm64: dts: qcom: sm8150: fix USB SS wakeup
[not found] <20231213173403.29544-1-johan+linaro@kernel.org>
` (3 preceding siblings ...)
2023-12-13 17:34 ` [PATCH 4/5] arm64: dts: qcom: sm8150: fix USB DP/DM HS PHY interrupts Johan Hovold
@ 2023-12-13 17:34 ` Johan Hovold
2023-12-13 19:00 ` Konrad Dybcio
4 siblings, 1 reply; 10+ messages in thread
From: Johan Hovold @ 2023-12-13 17:34 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Krishna Kurapati PSSNV, linux-arm-msm, devicetree,
linux-kernel, Johan Hovold, stable, Jack Pham, Jonathan Marek
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 5e46b9ef8642..56c74a841d80 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3566,7 +3566,7 @@ usb_1: usb@a6f8800 {
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 8 IRQ_TYPE_EDGE_BOTH>,
<&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
@@ -3619,7 +3619,7 @@ usb_2: usb@a8f8800 {
assigned-clock-rates = <19200000>, <200000000>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&intc GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 10 IRQ_TYPE_EDGE_BOTH>,
<&pdc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
--
2.41.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 5/5] arm64: dts: qcom: sm8150: fix USB SS wakeup
2023-12-13 17:34 ` [PATCH 5/5] arm64: dts: qcom: sm8150: fix USB SS wakeup Johan Hovold
@ 2023-12-13 19:00 ` Konrad Dybcio
0 siblings, 0 replies; 10+ messages in thread
From: Konrad Dybcio @ 2023-12-13 19:00 UTC (permalink / raw)
To: Johan Hovold, Bjorn Andersson
Cc: Andy Gross, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Krishna Kurapati PSSNV, linux-arm-msm, devicetree, linux-kernel,
stable, Jack Pham, Jonathan Marek
On 12/13/23 18:34, Johan Hovold wrote:
> The USB SS PHY interrupts need to be provided by the PDC interrupt
> controller in order to be able to wake the system up from low-power
> states.
>
> Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
> Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
> Cc: stable@vger.kernel.org # 5.10
> Cc: Jack Pham <quic_jackp@quicinc.com>
> Cc: Jonathan Marek <jonathan@marek.ca>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
Matches ds
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 10+ messages in thread