From: <gregkh@linuxfoundation.org>
To: jtornosm@redhat.com,gregkh@linuxfoundation.org,stable@vger.kernel.org,stern@rowland.harvard.edu
Subject: patch "net: usb: ax88179_178a: avoid failed operations when device is" added to usb-linus
Date: Fri, 15 Dec 2023 14:01:43 +0100 [thread overview]
Message-ID: <2023121543-earthworm-buffed-6972@gregkh> (raw)
This is a note to let you know that I've just added the patch titled
net: usb: ax88179_178a: avoid failed operations when device is
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001
From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Date: Thu, 7 Dec 2023 18:50:07 +0100
Subject: net: usb: ax88179_178a: avoid failed operations when device is
disconnected
When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.
cc: <stable@vger.kernel.org>
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/ax88179_178a.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 4ea0e155bb0d..5a1bf42ce156 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -173,6 +173,7 @@ struct ax88179_data {
u8 in_pm;
u32 wol_supported;
u32 wolopts;
+ u8 disconnecting;
};
struct ax88179_int_data {
@@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
{
int ret;
int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+ struct ax88179_data *ax179_data = dev->driver_priv;
BUG_ON(!dev);
@@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, data, size);
- if (unlikely(ret < 0))
+ if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
index, ret);
@@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
{
int ret;
int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+ struct ax88179_data *ax179_data = dev->driver_priv;
BUG_ON(!dev);
@@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index, data, size);
- if (unlikely(ret < 0))
+ if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
index, ret);
@@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf)
return usbnet_resume(intf);
}
+static void ax88179_disconnect(struct usb_interface *intf)
+{
+ struct usbnet *dev = usb_get_intfdata(intf);
+ struct ax88179_data *ax179_data;
+
+ if (!dev)
+ return;
+
+ ax179_data = dev->driver_priv;
+ ax179_data->disconnecting = 1;
+
+ usbnet_disconnect(intf);
+}
+
static void
ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
@@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = {
.suspend = ax88179_suspend,
.resume = ax88179_resume,
.reset_resume = ax88179_resume,
- .disconnect = usbnet_disconnect,
+ .disconnect = ax88179_disconnect,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
--
2.43.0
reply other threads:[~2023-12-15 13:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023121543-earthworm-buffed-6972@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=jtornosm@redhat.com \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox