From: Manivannan Sadhasivam <mani@kernel.org>
To: Qiang Yu <quic_qianyu@quicinc.com>
Cc: mani@kernel.org, quic_jhugo@quicinc.com, mhi@lists.linux.dev,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
quic_cang@quicinc.com, quic_mrana@quicinc.com,
Bhaumik Bhatt <bbhatt@codeaurora.org>,
stable@vger.kernel.org
Subject: Re: [PATCH v5 1/2] bus: mhi: host: Add spinlock to protect WP access when queueing TREs
Date: Sat, 16 Dec 2023 10:45:12 +0530 [thread overview]
Message-ID: <20231216051512.GA3405@thinkpad> (raw)
In-Reply-To: <1702276972-41296-2-git-send-email-quic_qianyu@quicinc.com>
On Mon, Dec 11, 2023 at 02:42:51PM +0800, Qiang Yu wrote:
> From: Bhaumik Bhatt <bbhatt@codeaurora.org>
>
> Protect WP accesses such that multiple threads queueing buffers for
> incoming data do not race.
>
> Meanwhile, if CONFIG_TRACE_IRQFLAGS is enabled, irq will be enabled once
> __local_bh_enable_ip is called as part of write_unlock_bh. Hence, let's
> take irqsave lock after TRE is generated to avoid running write_unlock_bh
> when irqsave lock is held.
>
> Cc: <stable@vger.kernel.org>
> Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Mani
> ---
> drivers/bus/mhi/host/main.c | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> index dcf627b..32021fe 100644
> --- a/drivers/bus/mhi/host/main.c
> +++ b/drivers/bus/mhi/host/main.c
> @@ -1122,17 +1122,15 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
> if (unlikely(MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)))
> return -EIO;
>
> - read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
> -
> ret = mhi_is_ring_full(mhi_cntrl, tre_ring);
> - if (unlikely(ret)) {
> - ret = -EAGAIN;
> - goto exit_unlock;
> - }
> + if (unlikely(ret))
> + return -EAGAIN;
>
> ret = mhi_gen_tre(mhi_cntrl, mhi_chan, buf_info, mflags);
> if (unlikely(ret))
> - goto exit_unlock;
> + return ret;
> +
> + read_lock_irqsave(&mhi_cntrl->pm_lock, flags);
>
> /* Packet is queued, take a usage ref to exit M3 if necessary
> * for host->device buffer, balanced put is done on buffer completion
> @@ -1152,7 +1150,6 @@ static int mhi_queue(struct mhi_device *mhi_dev, struct mhi_buf_info *buf_info,
> if (dir == DMA_FROM_DEVICE)
> mhi_cntrl->runtime_put(mhi_cntrl);
>
> -exit_unlock:
> read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags);
>
> return ret;
> @@ -1204,6 +1201,9 @@ int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
> int eot, eob, chain, bei;
> int ret;
>
> + /* Protect accesses for reading and incrementing WP */
> + write_lock_bh(&mhi_chan->lock);
> +
> buf_ring = &mhi_chan->buf_ring;
> tre_ring = &mhi_chan->tre_ring;
>
> @@ -1221,8 +1221,10 @@ int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
>
> if (!info->pre_mapped) {
> ret = mhi_cntrl->map_single(mhi_cntrl, buf_info);
> - if (ret)
> + if (ret) {
> + write_unlock_bh(&mhi_chan->lock);
> return ret;
> + }
> }
>
> eob = !!(flags & MHI_EOB);
> @@ -1239,6 +1241,8 @@ int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan,
> mhi_add_ring_element(mhi_cntrl, tre_ring);
> mhi_add_ring_element(mhi_cntrl, buf_ring);
>
> + write_unlock_bh(&mhi_chan->lock);
> +
> return 0;
> }
>
> --
> 2.7.4
>
>
--
மணிவண்ணன் சதாசிவம்
prev parent reply other threads:[~2023-12-16 5:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1702276972-41296-1-git-send-email-quic_qianyu@quicinc.com>
2023-12-11 6:42 ` [PATCH v5 1/2] bus: mhi: host: Add spinlock to protect WP access when queueing TREs Qiang Yu
2023-12-15 18:23 ` Jeffrey Hugo
2023-12-16 5:15 ` Manivannan Sadhasivam [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231216051512.GA3405@thinkpad \
--to=mani@kernel.org \
--cc=bbhatt@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhi@lists.linux.dev \
--cc=quic_cang@quicinc.com \
--cc=quic_jhugo@quicinc.com \
--cc=quic_mrana@quicinc.com \
--cc=quic_qianyu@quicinc.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox