[PATCH 5.4 00/40] 5.4.265-rc1 review

[PATCH 5.4 00/40] 5.4.265-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.265 release.
There are 40 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.265-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.265-rc1

Naveen N Rao <naveen@kernel.org>
    powerpc/ftrace: Fix stack teardown in ftrace_no_trace

Naveen N Rao <naveen@kernel.org>
    powerpc/ftrace: Create a dummy stackframe to fix stack unwind

Adrian Hunter <adrian.hunter@intel.com>
    mmc: block: Be sure to wait while busy in CQE error recovery

Steven Rostedt (Google) <rostedt@goodmis.org>
    ring-buffer: Fix memory leak of free page

Florent Revest <revest@chromium.org>
    team: Fix use-after-free when an option instance allocation fails

James Houghton <jthoughton@google.com>
    arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify

Baokun Li <libaokun1@huawei.com>
    ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    soundwire: stream: fix NULL pointer dereference for multi_link

Mark Rutland <mark.rutland@arm.com>
    perf: Fix perf_event_validate_size() lockdep splat

Denis Benato <benato.denis96@gmail.com>
    HID: hid-asus: add const to read-only outgoing usb buffer

Lech Perczak <lech.perczak@gmail.com>
    net: usb: qmi_wwan: claim interface 4 for ZTE MF290

Linus Torvalds <torvalds@linux-foundation.org>
    asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation

Aoba K <nexp_0x17@outlook.com>
    HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad

Denis Benato <benato.denis96@gmail.com>
    HID: hid-asus: reset the backlight brightness level on resume

Oliver Neukum <oneukum@suse.com>
    HID: add ALWAYS_POLL quirk for Apple kb

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    platform/x86: intel_telemetry: Fix kernel doc descriptions

Coly Li <colyli@suse.de>
    bcache: avoid NULL checking to c->root in run_cache_set()

Coly Li <colyli@suse.de>
    bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc()

Coly Li <colyli@suse.de>
    bcache: avoid oversize memory allocation by small stripe_size

Ming Lei <ming.lei@redhat.com>
    blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"

Oliver Neukum <oneukum@suse.com>
    usb: aqc111: check packet for fixup for true limit

Bjorn Helgaas <bhelgaas@google.com>
    Revert "PCI: acpiphp: Reassign resources on bridge if necessary"

Kai Vehmanen <kai.vehmanen@linux.intel.com>
    ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants

Jens Axboe <axboe@kernel.dk>
    cred: switch to using atomic_long_t

Hyunwoo Kim <v4bel@theori.io>
    appletalk: Fix Use-After-Free in atalk_ioctl

Andrew Halaney <ahalaney@redhat.com>
    net: stmmac: Handle disabled MDIO busses from devicetree

Rasmus Villemoes <linux@rasmusvillemoes.dk>
    net: stmmac: use dev_err_probe() for reporting mdio bus registration failure

Nikolay Kuratov <kniv@yandex-team.ru>
    vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

Yusong Gao <a869920004@gmail.com>
    sign-file: Fix incorrect return values check

Dong Chenchen <dongchenchen2@huawei.com>
    net: Remove acked SYN flag from packet in the transmit queue correctly

Dinghao Liu <dinghao.liu@zju.edu.cn>
    qed: Fix a potential use-after-free in qed_cxt_tables_alloc

Hyunwoo Kim <v4bel@theori.io>
    net/rose: Fix Use-After-Free in rose_ioctl

Hyunwoo Kim <v4bel@theori.io>
    atm: Fix Use-After-Free in do_vcc_ioctl

Chengfeng Ye <dg573847474@gmail.com>
    atm: solos-pci: Fix potential deadlock on &tx_queue_lock

Chengfeng Ye <dg573847474@gmail.com>
    atm: solos-pci: Fix potential deadlock on &cli_queue_lock

Stefan Wahren <wahrenst@gmx.net>
    qca_spi: Fix reset behavior

Stefan Wahren <wahrenst@gmx.net>
    qca_debug: Fix ethtool -G iface tx behavior

Stefan Wahren <wahrenst@gmx.net>
    qca_debug: Prevent crash on TX ring changes

Maciej Żenczykowski <maze@google.com>
    net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX

David Howells <dhowells@redhat.com>
    afs: Fix refcount underflow from error handling race


-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/arm64/include/asm/pgtable.h                  |  6 +++
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S    | 17 ++++--
 block/blk-throttle.c                              |  2 +
 drivers/atm/solos-pci.c                           |  8 +--
 drivers/hid/hid-asus.c                            | 25 +++++++--
 drivers/hid/hid-multitouch.c                      |  5 ++
 drivers/hid/hid-quirks.c                          |  1 +
 drivers/md/bcache/bcache.h                        |  1 +
 drivers/md/bcache/btree.c                         |  7 +++
 drivers/md/bcache/super.c                         |  4 +-
 drivers/mmc/core/core.c                           |  2 +
 drivers/mmc/core/mmc_ops.c                        |  5 +-
 drivers/mmc/core/mmc_ops.h                        |  2 +
 drivers/net/ethernet/qlogic/qed/qed_cxt.c         |  1 +
 drivers/net/ethernet/qualcomm/qca_debug.c         | 17 +++---
 drivers/net/ethernet/qualcomm/qca_spi.c           | 20 ++++++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |  6 +--
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c |  8 ++-
 drivers/net/team/team.c                           |  4 +-
 drivers/net/usb/aqc111.c                          |  8 +--
 drivers/net/usb/qmi_wwan.c                        |  1 +
 drivers/pci/hotplug/acpiphp_glue.c                |  9 ++--
 drivers/platform/x86/intel_telemetry_core.c       |  4 +-
 drivers/soundwire/stream.c                        |  7 +--
 fs/afs/rxrpc.c                                    |  2 +-
 fs/ext4/mballoc.c                                 |  4 ++
 include/asm-generic/qspinlock.h                   |  2 +-
 include/linux/cred.h                              |  8 +--
 include/net/addrconf.h                            | 12 ++++-
 include/net/if_inet6.h                            |  4 --
 kernel/cred.c                                     | 64 +++++++++++------------
 kernel/events/core.c                              | 10 ++++
 kernel/trace/ring_buffer.c                        |  2 +
 net/appletalk/ddp.c                               |  9 ++--
 net/atm/ioctl.c                                   |  7 ++-
 net/ipv4/tcp_output.c                             |  6 +++
 net/ipv6/addrconf.c                               |  6 +--
 net/rose/af_rose.c                                |  4 +-
 net/vmw_vsock/virtio_transport_common.c           |  2 +-
 scripts/sign-file.c                               | 12 ++---
 sound/pci/hda/patch_hdmi.c                        |  2 +
 42 files changed, 220 insertions(+), 110 deletions(-)

[PATCH 5.4 01/40] afs: Fix refcount underflow from error handling race

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

[ Upstream commit 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 ]

If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL
server or fileserver), an asynchronous probe to one of its addresses may
fail immediately because sendmsg() returns an error.  When this happens, a
refcount underflow can happen if certain events hit a very small window.

The way this occurs is:

 (1) There are two levels of "call" object, the afs_call and the
     rxrpc_call.  Each of them can be transitioned to a "completed" state
     in the event of success or failure.

 (2) Asynchronous afs_calls are self-referential whilst they are active to
     prevent them from evaporating when they're not being processed.  This
     reference is disposed of when the afs_call is completed.

     Note that an afs_call may only be completed once; once completed
     completing it again will do nothing.

 (3) When a call transmission is made, the app-side rxrpc code queues a Tx
     buffer for the rxrpc I/O thread to transmit.  The I/O thread invokes
     sendmsg() to transmit it - and in the case of failure, it transitions
     the rxrpc_call to the completed state.

 (4) When an rxrpc_call is completed, the app layer is notified.  In this
     case, the app is kafs and it schedules a work item to process events
     pertaining to an afs_call.

 (5) When the afs_call event processor is run, it goes down through the
     RPC-specific handler to afs_extract_data() to retrieve data from rxrpc
     - and, in this case, it picks up the error from the rxrpc_call and
     returns it.

     The error is then propagated to the afs_call and that is completed
     too.  At this point the self-reference is released.

 (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the
     window between rxrpc_send_data() queuing the request packet and
     checking for call completion on the way out, then
     rxrpc_kernel_send_data() will return the error from sendmsg() to the
     app.

 (7) Then afs_make_call() will see an error and will jump to the error
     handling path which will attempt to clean up the afs_call.

 (8) The problem comes when the error handling path in afs_make_call()
     tries to unconditionally drop an async afs_call's self-reference.
     This self-reference, however, may already have been dropped by
     afs_extract_data() completing the afs_call

 (9) The refcount underflows when we return to afs_do_probe_vlserver() and
     that tries to drop its reference on the afs_call.

Fix this by making afs_make_call() attempt to complete the afs_call rather
than unconditionally putting it.  That way, if afs_extract_data() manages
to complete the call first, afs_make_call() won't do anything.

The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and
sticking an msleep() in rxrpc_send_data() after the 'success:' label to
widen the race window.

The error message looks something like:

    refcount_t: underflow; use-after-free.
    WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
    ...
    RIP: 0010:refcount_warn_saturate+0xba/0x110
    ...
    afs_put_call+0x1dc/0x1f0 [kafs]
    afs_fs_get_capabilities+0x8b/0xe0 [kafs]
    afs_fs_probe_fileserver+0x188/0x1e0 [kafs]
    afs_lookup_server+0x3bf/0x3f0 [kafs]
    afs_alloc_server_list+0x130/0x2e0 [kafs]
    afs_create_volume+0x162/0x400 [kafs]
    afs_get_tree+0x266/0x410 [kafs]
    vfs_get_tree+0x25/0xc0
    fc_mount+0xe/0x40
    afs_d_automount+0x1b3/0x390 [kafs]
    __traverse_mounts+0x8f/0x210
    step_into+0x340/0x760
    path_openat+0x13a/0x1260
    do_filp_open+0xaf/0x160
    do_sys_openat2+0xaf/0x170

or something like:

    refcount_t: underflow; use-after-free.
    ...
    RIP: 0010:refcount_warn_saturate+0x99/0xda
    ...
    afs_put_call+0x4a/0x175
    afs_send_vl_probes+0x108/0x172
    afs_select_vlserver+0xd6/0x311
    afs_do_cell_detect_alias+0x5e/0x1e9
    afs_cell_detect_alias+0x44/0x92
    afs_validate_fc+0x9d/0x134
    afs_get_tree+0x20/0x2e6
    vfs_get_tree+0x1d/0xc9
    fc_mount+0xe/0x33
    afs_d_automount+0x48/0x9d
    __traverse_mounts+0xe0/0x166
    step_into+0x140/0x274
    open_last_lookups+0x1c1/0x1df
    path_openat+0x138/0x1c3
    do_filp_open+0x55/0xb4
    do_sys_openat2+0x6c/0xb6

Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting")
Reported-by: Bill MacAllister <bill@ca-zephyr.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/rxrpc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/afs/rxrpc.c b/fs/afs/rxrpc.c
index 49fcce6529a60..30952f073fb41 100644
--- a/fs/afs/rxrpc.c
+++ b/fs/afs/rxrpc.c
@@ -490,7 +490,7 @@ void afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, gfp_t gfp)
 	if (call->async) {
 		if (cancel_work_sync(&call->async_work))
 			afs_put_call(call);
-		afs_put_call(call);
+		afs_set_call_complete(call, ret, 0);
 	}
 
 	ac->error = ret;
-- 
2.43.0

[PATCH 5.4 02/40] net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ]

Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.

We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.

We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.

This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.

Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/addrconf.h | 12 ++++++++++--
 include/net/if_inet6.h |  4 ----
 net/ipv6/addrconf.c    |  6 +-----
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 880e609b7352a..32685eaba28fc 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -31,17 +31,22 @@ struct prefix_info {
 	__u8			length;
 	__u8			prefix_len;
 
+	union __packed {
+		__u8		flags;
+		struct __packed {
 #if defined(__BIG_ENDIAN_BITFIELD)
-	__u8			onlink : 1,
+			__u8	onlink : 1,
 			 	autoconf : 1,
 				reserved : 6;
 #elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8			reserved : 6,
+			__u8	reserved : 6,
 				autoconf : 1,
 				onlink : 1;
 #else
 #error "Please fix <asm/byteorder.h>"
 #endif
+		};
+	};
 	__be32			valid;
 	__be32			prefered;
 	__be32			reserved2;
@@ -49,6 +54,9 @@ struct prefix_info {
 	struct in6_addr		prefix;
 };
 
+/* rfc4861 4.6.2: IPv6 PIO is 32 bytes in size */
+static_assert(sizeof(struct prefix_info) == 32);
+
 #include <linux/ipv6.h>
 #include <linux/netdevice.h>
 #include <net/if_inet6.h>
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index f6d614926e9e9..601bedda91c00 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -22,10 +22,6 @@
 #define IF_RS_SENT	0x10
 #define IF_READY	0x80000000
 
-/* prefix flags */
-#define IF_PREFIX_ONLINK	0x01
-#define IF_PREFIX_AUTOCONF	0x02
-
 enum {
 	INET6_IFADDR_STATE_PREDAD,
 	INET6_IFADDR_STATE_DAD,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index c523236d934eb..4bec4c0617412 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -5977,11 +5977,7 @@ static int inet6_fill_prefix(struct sk_buff *skb, struct inet6_dev *idev,
 	pmsg->prefix_len = pinfo->prefix_len;
 	pmsg->prefix_type = pinfo->type;
 	pmsg->prefix_pad3 = 0;
-	pmsg->prefix_flags = 0;
-	if (pinfo->onlink)
-		pmsg->prefix_flags |= IF_PREFIX_ONLINK;
-	if (pinfo->autoconf)
-		pmsg->prefix_flags |= IF_PREFIX_AUTOCONF;
+	pmsg->prefix_flags = pinfo->flags;
 
 	if (nla_put(skb, PREFIX_ADDRESS, sizeof(pinfo->prefix), &pinfo->prefix))
 		goto nla_put_failure;
-- 
2.43.0

[PATCH 5.4 03/40] qca_debug: Prevent crash on TX ring changes

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ]

The qca_spi driver stop and restart the SPI kernel thread
(via ndo_stop & ndo_open) in case of TX ring changes. This is
a big issue because it allows userspace to prevent restart of
the SPI kernel thread (via signals). A subsequent change of
TX ring wrongly assume a valid spi_thread pointer which result
in a crash.

So prevent this by stopping the network traffic handling and
temporary park the SPI thread.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qualcomm/qca_debug.c |  9 ++++-----
 drivers/net/ethernet/qualcomm/qca_spi.c   | 12 ++++++++++++
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index 702aa217a27ad..4c6c1792fdc77 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -258,7 +258,6 @@ qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 static int
 qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
 	struct qcaspi *qca = netdev_priv(dev);
 
 	if ((ring->rx_pending) ||
@@ -266,14 +265,14 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;
 
-	if (netif_running(dev))
-		ops->ndo_stop(dev);
+	if (qca->spi_thread)
+		kthread_park(qca->spi_thread);
 
 	qca->txr.count = max_t(u32, ring->tx_pending, TX_RING_MIN_LEN);
 	qca->txr.count = min_t(u16, qca->txr.count, TX_RING_MAX_LEN);
 
-	if (netif_running(dev))
-		ops->ndo_open(dev);
+	if (qca->spi_thread)
+		kthread_unpark(qca->spi_thread);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index db6817de24a14..04a7185e440db 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -573,6 +573,18 @@ qcaspi_spi_thread(void *data)
 	netdev_info(qca->net_dev, "SPI thread created\n");
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_park()) {
+			netif_tx_disable(qca->net_dev);
+			netif_carrier_off(qca->net_dev);
+			qcaspi_flush_tx_ring(qca);
+			kthread_parkme();
+			if (qca->sync == QCASPI_SYNC_READY) {
+				netif_carrier_on(qca->net_dev);
+				netif_wake_queue(qca->net_dev);
+			}
+			continue;
+		}
+
 		if ((qca->intr_req == qca->intr_svc) &&
 		    !qca->txr.skb[qca->txr.head])
 			schedule();
-- 
2.43.0

[PATCH 5.4 04/40] qca_debug: Fix ethtool -G iface tx behavior

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ]

After calling ethtool -g it was not possible to adjust the TX ring
size again:

  # ethtool -g eth1
  Ring parameters for eth1:
  Pre-set maximums:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  Current hardware settings:
  RX:		4
  RX Mini:	n/a
  RX Jumbo:	n/a
  TX:		10
  # ethtool -G eth1 tx 8
  netlink error: Invalid argument

The reason for this is that the readonly setting rx_pending get
initialized and after that the range check in qcaspi_set_ringparam()
fails regardless of the provided parameter. So fix this by accepting
the exposed RX defaults. Instead of adding another magic number
better use a new define here.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qualcomm/qca_debug.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_debug.c b/drivers/net/ethernet/qualcomm/qca_debug.c
index 4c6c1792fdc77..66229b300c5a4 100644
--- a/drivers/net/ethernet/qualcomm/qca_debug.c
+++ b/drivers/net/ethernet/qualcomm/qca_debug.c
@@ -30,6 +30,8 @@
 
 #define QCASPI_MAX_REGS 0x20
 
+#define QCASPI_RX_MAX_FRAMES 4
+
 static const u16 qcaspi_spi_regs[] = {
 	SPI_REG_BFR_SIZE,
 	SPI_REG_WRBUF_SPC_AVA,
@@ -249,9 +251,9 @@ qcaspi_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 {
 	struct qcaspi *qca = netdev_priv(dev);
 
-	ring->rx_max_pending = 4;
+	ring->rx_max_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_max_pending = TX_RING_MAX_LEN;
-	ring->rx_pending = 4;
+	ring->rx_pending = QCASPI_RX_MAX_FRAMES;
 	ring->tx_pending = qca->txr.count;
 }
 
@@ -260,7 +262,7 @@ qcaspi_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
 {
 	struct qcaspi *qca = netdev_priv(dev);
 
-	if ((ring->rx_pending) ||
+	if (ring->rx_pending != QCASPI_RX_MAX_FRAMES ||
 	    (ring->rx_mini_pending) ||
 	    (ring->rx_jumbo_pending))
 		return -EINVAL;
-- 
2.43.0

[PATCH 5.4 05/40] qca_spi: Fix reset behavior

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ]

In case of a reset triggered by the QCA7000 itself, the behavior of the
qca_spi driver was not quite correct:
- in case of a pending RX frame decoding the drop counter must be
  incremented and decoding state machine reseted
- also the reset counter must always be incremented regardless of sync
  state

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 04a7185e440db..036ab9dfe7fc5 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -613,11 +613,17 @@ qcaspi_spi_thread(void *data)
 			if (intr_cause & SPI_INT_CPU_ON) {
 				qcaspi_qca7k_sync(qca, QCASPI_EVENT_CPUON);
 
+				/* Frame decoding in progress */
+				if (qca->frm_handle.state != qca->frm_handle.init)
+					qca->net_dev->stats.rx_dropped++;
+
+				qcafrm_fsm_init_spi(&qca->frm_handle);
+				qca->stats.device_reset++;
+
 				/* not synced. */
 				if (qca->sync != QCASPI_SYNC_READY)
 					continue;
 
-				qca->stats.device_reset++;
 				netif_wake_queue(qca->net_dev);
 				netif_carrier_on(qca->net_dev);
 			}
-- 
2.43.0

[PATCH 5.4 06/40] atm: solos-pci: Fix potential deadlock on &cli_queue_lock

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chengfeng Ye <dg573847474@gmail.com>

[ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ]

As &card->cli_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.

<deadlock #1>
console_show()
--> spin_lock(&card->cli_queue_lock)
<interrupt>
   --> solos_bh()
   --> spin_lock(&card->cli_queue_lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh()
on the card->cli_queue_lock under process context code consistently
to prevent the possible deadlock scenario.

Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/solos-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index c32f7dd9879ac..f7ec9ef361921 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -449,9 +449,9 @@ static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 	struct sk_buff *skb;
 	unsigned int len;
 
-	spin_lock(&card->cli_queue_lock);
+	spin_lock_bh(&card->cli_queue_lock);
 	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
-	spin_unlock(&card->cli_queue_lock);
+	spin_unlock_bh(&card->cli_queue_lock);
 	if(skb == NULL)
 		return sprintf(buf, "No data.\n");
 
-- 
2.43.0

[PATCH 5.4 07/40] atm: solos-pci: Fix potential deadlock on &tx_queue_lock

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chengfeng Ye <dg573847474@gmail.com>

[ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ]

As &card->tx_queue_lock is acquired under softirq context along the
following call chain from solos_bh(), other acquisition of the same
lock inside process context should disable at least bh to avoid double
lock.

<deadlock #2>
pclose()
--> spin_lock(&card->tx_queue_lock)
<interrupt>
   --> solos_bh()
   --> fpga_tx()
   --> spin_lock(&card->tx_queue_lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_bh()
on &card->tx_queue_lock under process context code consistently to
prevent the possible deadlock scenario.

Fixes: 213e85d38912 ("solos-pci: clean up pclose() function")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/solos-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index f7ec9ef361921..9f2148daf8ad1 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -956,14 +956,14 @@ static void pclose(struct atm_vcc *vcc)
 	struct pkt_hdr *header;
 
 	/* Remove any yet-to-be-transmitted packets from the pending queue */
-	spin_lock(&card->tx_queue_lock);
+	spin_lock_bh(&card->tx_queue_lock);
 	skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
 		if (SKB_CB(skb)->vcc == vcc) {
 			skb_unlink(skb, &card->tx_queue[port]);
 			solos_pop(vcc, skb);
 		}
 	}
-	spin_unlock(&card->tx_queue_lock);
+	spin_unlock_bh(&card->tx_queue_lock);
 
 	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 	if (!skb) {
-- 
2.43.0

[PATCH 5.4 08/40] atm: Fix Use-After-Free in do_vcc_ioctl

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hyunwoo Kim <v4bel@theori.io>

[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ]

Because do_vcc_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with vcc_recvmsg().
A use-after-free for skb occurs with the following flow.
```
do_vcc_ioctl() -> skb_peek()
vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/atm/ioctl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/atm/ioctl.c b/net/atm/ioctl.c
index d955b683aa7c4..3a2198aabc363 100644
--- a/net/atm/ioctl.c
+++ b/net/atm/ioctl.c
@@ -71,14 +71,17 @@ static int do_vcc_ioctl(struct socket *sock, unsigned int cmd,
 	case SIOCINQ:
 	{
 		struct sk_buff *skb;
+		int amount;
 
 		if (sock->state != SS_CONNECTED) {
 			error = -EINVAL;
 			goto done;
 		}
+		spin_lock_irq(&sk->sk_receive_queue.lock);
 		skb = skb_peek(&sk->sk_receive_queue);
-		error = put_user(skb ? skb->len : 0,
-				 (int __user *)argp) ? -EFAULT : 0;
+		amount = skb ? skb->len : 0;
+		spin_unlock_irq(&sk->sk_receive_queue.lock);
+		error = put_user(amount, (int __user *)argp) ? -EFAULT : 0;
 		goto done;
 	}
 	case ATM_SETSC:
-- 
2.43.0

[PATCH 5.4 09/40] net/rose: Fix Use-After-Free in rose_ioctl

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hyunwoo Kim <v4bel@theori.io>

[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ]

Because rose_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with rose_accept().
A use-after-free for skb occurs with the following flow.
```
rose_ioctl() -> skb_peek()
rose_accept() -> skb_dequeue() -> kfree_skb()
```
Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rose/af_rose.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 6fb158172ddc2..fc9ef08788f73 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -1285,9 +1285,11 @@ static int rose_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	case TIOCINQ: {
 		struct sk_buff *skb;
 		long amount = 0L;
-		/* These two are safe on a single CPU system as only user tasks fiddle here */
+
+		spin_lock_irq(&sk->sk_receive_queue.lock);
 		if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
 			amount = skb->len;
+		spin_unlock_irq(&sk->sk_receive_queue.lock);
 		return put_user(amount, (unsigned int __user *) argp);
 	}
 
-- 
2.43.0

[PATCH 5.4 10/40] qed: Fix a potential use-after-free in qed_cxt_tables_alloc

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ]

qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to
free p_hwfn->p_cxt_mngr->ilt_shadow on error. However,
qed_cxt_tables_alloc() accesses the freed pointer on failure
of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(),
which may lead to use-after-free. Fix this issue by setting
p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().

Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_cxt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index 8ea46b81b7395..8a7ac17d3ef7e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -1023,6 +1023,7 @@ static void qed_ilt_shadow_free(struct qed_hwfn *p_hwfn)
 		p_dma->p_virt = NULL;
 	}
 	kfree(p_mngr->ilt_shadow);
+	p_mngr->ilt_shadow = NULL;
 }
 
 static int qed_ilt_blk_alloc(struct qed_hwfn *p_hwfn,
-- 
2.43.0

[PATCH 5.4 11/40] net: Remove acked SYN flag from packet in the transmit queue correctly

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dong Chenchen <dongchenchen2@huawei.com>

[ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ]

syzkaller report:

 kernel BUG at net/core/skbuff.c:3452!
 invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135
 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452)
 Call Trace:
 icmp_glue_bits (net/ipv4/icmp.c:357)
 __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165)
 ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341)
 icmp_push_reply (net/ipv4/icmp.c:370)
 __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772)
 ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577)
 __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295)
 ip_output (net/ipv4/ip_output.c:427)
 __ip_queue_xmit (net/ipv4/ip_output.c:535)
 __tcp_transmit_skb (net/ipv4/tcp_output.c:1462)
 __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387)
 tcp_retransmit_skb (net/ipv4/tcp_output.c:3404)
 tcp_retransmit_timer (net/ipv4/tcp_timer.c:604)
 tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716)

The panic issue was trigered by tcp simultaneous initiation.
The initiation process is as follows:

      TCP A                                            TCP B

  1.  CLOSED                                           CLOSED

  2.  SYN-SENT     --> <SEQ=100><CTL=SYN>              ...

  3.  SYN-RECEIVED <-- <SEQ=300><CTL=SYN>              <-- SYN-SENT

  4.               ... <SEQ=100><CTL=SYN>              --> SYN-RECEIVED

  5.  SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...

  // TCP B: not send challenge ack for ack limit or packet loss
  // TCP A: close
	tcp_close
	   tcp_send_fin
              if (!tskb && tcp_under_memory_pressure(sk))
                  tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet
           TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN;  // set FIN flag

  6.  FIN_WAIT_1  --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ...

  // TCP B: send challenge ack to SYN_FIN_ACK

  7.               ... <SEQ=301><ACK=101><CTL=ACK>   <-- SYN-RECEIVED //challenge ack

  // TCP A:  <SND.UNA=101>

  8.  FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic

	__tcp_retransmit_skb  //skb->len=0
	    tcp_trim_head
		len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100
		    __pskb_trim_head
			skb->data_len -= len // skb->len=-1, wrap around
	    ... ...
	    ip_fragment
		icmp_glue_bits //BUG_ON

If we use tcp_trim_head() to remove acked SYN from packet that contains data
or other flags, skb->len will be incorrectly decremented. We can remove SYN
flag that has been acked from rtx_queue earlier than tcp_trim_head(), which
can fix the problem mentioned above.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_output.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 1dce05bfa3005..6d7f441c7dd76 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2945,7 +2945,13 @@ int __tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb, int segs)
 	if (skb_still_in_host_queue(sk, skb))
 		return -EBUSY;
 
+start:
 	if (before(TCP_SKB_CB(skb)->seq, tp->snd_una)) {
+		if (unlikely(TCP_SKB_CB(skb)->tcp_flags & TCPHDR_SYN)) {
+			TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_SYN;
+			TCP_SKB_CB(skb)->seq++;
+			goto start;
+		}
 		if (unlikely(before(TCP_SKB_CB(skb)->end_seq, tp->snd_una))) {
 			WARN_ON_ONCE(1);
 			return -EINVAL;
-- 
2.43.0

[PATCH 5.4 12/40] sign-file: Fix incorrect return values check

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yusong Gao <a869920004@gmail.com>

[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ]

There are some wrong return values check in sign-file when call OpenSSL
API. The ERR() check cond is wrong because of the program only check the
return value is < 0 which ignored the return val is 0. For example:
1. CMS_final() return 1 for success or 0 for failure.
2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure.
3. i2d_TYPEbio() return 1 for success and 0 for failure.
4. BIO_free() return 1 for success and 0 for failure.

Link: https://www.openssl.org/docs/manmaster/man3/
Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature")
Signed-off-by: Yusong Gao <a869920004@gmail.com>
Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/sign-file.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/scripts/sign-file.c b/scripts/sign-file.c
index 7434e9ea926e2..12acc70e5a7a5 100644
--- a/scripts/sign-file.c
+++ b/scripts/sign-file.c
@@ -322,7 +322,7 @@ int main(int argc, char **argv)
 				     CMS_NOSMIMECAP | use_keyid |
 				     use_signed_attrs),
 		    "CMS_add1_signer");
-		ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) < 0,
+		ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) != 1,
 		    "CMS_final");
 
 #else
@@ -341,10 +341,10 @@ int main(int argc, char **argv)
 			b = BIO_new_file(sig_file_name, "wb");
 			ERR(!b, "%s", sig_file_name);
 #ifndef USE_PKCS7
-			ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) < 0,
+			ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) != 1,
 			    "%s", sig_file_name);
 #else
-			ERR(i2d_PKCS7_bio(b, pkcs7) < 0,
+			ERR(i2d_PKCS7_bio(b, pkcs7) != 1,
 			    "%s", sig_file_name);
 #endif
 			BIO_free(b);
@@ -374,9 +374,9 @@ int main(int argc, char **argv)
 
 	if (!raw_sig) {
 #ifndef USE_PKCS7
-		ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) < 0, "%s", dest_name);
+		ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) != 1, "%s", dest_name);
 #else
-		ERR(i2d_PKCS7_bio(bd, pkcs7) < 0, "%s", dest_name);
+		ERR(i2d_PKCS7_bio(bd, pkcs7) != 1, "%s", dest_name);
 #endif
 	} else {
 		BIO *b;
@@ -396,7 +396,7 @@ int main(int argc, char **argv)
 	ERR(BIO_write(bd, &sig_info, sizeof(sig_info)) < 0, "%s", dest_name);
 	ERR(BIO_write(bd, magic_number, sizeof(magic_number) - 1) < 0, "%s", dest_name);
 
-	ERR(BIO_free(bd) < 0, "%s", dest_name);
+	ERR(BIO_free(bd) != 1, "%s", dest_name);
 
 	/* Finally, if we're signing in place, replace the original. */
 	if (replace_orig)
-- 
2.43.0

[PATCH 5.4 13/40] vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Kuratov <kniv@yandex-team.ru>

[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ]

We need to do signed arithmetic if we expect condition
`if (bytes < 0)` to be possible

Found by Linux Verification Center (linuxtesting.org) with SVACE

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/virtio_transport_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c
index 93c11ffae92bb..e0bb83f5746c6 100644
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -372,7 +372,7 @@ static s64 virtio_transport_has_space(struct vsock_sock *vsk)
 	struct virtio_vsock_sock *vvs = vsk->trans;
 	s64 bytes;
 
-	bytes = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
+	bytes = (s64)vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
 	if (bytes < 0)
 		bytes = 0;
 
-- 
2.43.0

[PATCH 5.4 14/40] net: stmmac: use dev_err_probe() for reporting mdio bus registration failure

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit 839612d23ffd933174db911ce56dc3f3ca883ec5 ]

I have a board where these two lines are always printed during boot:

   imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus
   imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed

It's perfectly fine, and the device is successfully (and silently, as
far as the console goes) probed later.

Use dev_err_probe() instead, which will demote these messages to debug
level (thus removing the alarming messages from the console) when the
error is -EPROBE_DEFER, and also has the advantage of including the
error code if/when it happens to be something other than -EPROBE_DEFER.

While here, add the missing \n to one of the format strings.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e23c0d21ce92 ("net: stmmac: Handle disabled MDIO busses from devicetree")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4eaa65e8d58f2..ee48283b2d967 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4691,9 +4691,9 @@ int stmmac_dvr_probe(struct device *device,
 		/* MDIO bus Registration */
 		ret = stmmac_mdio_register(ndev);
 		if (ret < 0) {
-			dev_err(priv->device,
-				"%s: MDIO bus (id: %d) registration failed",
-				__func__, priv->plat->bus_id);
+			dev_err_probe(priv->device, ret,
+				      "%s: MDIO bus (id: %d) registration failed\n",
+				      __func__, priv->plat->bus_id);
 			goto error_mdio_register;
 		}
 	}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 40c42637ad755..846bf51f77b61 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -359,7 +359,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 
 	err = of_mdiobus_register(new_bus, mdio_node);
 	if (err != 0) {
-		dev_err(dev, "Cannot register the MDIO bus\n");
+		dev_err_probe(dev, err, "Cannot register the MDIO bus\n");
 		goto bus_register_fail;
 	}
 
-- 
2.43.0

[PATCH 5.4 15/40] net: stmmac: Handle disabled MDIO busses from devicetree

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Halaney <ahalaney@redhat.com>

[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ]

Many hardware configurations have the MDIO bus disabled, and are instead
using some other MDIO bus to talk to the MAC's phy.

of_mdiobus_register() returns -ENODEV in this case. Let's handle it
gracefully instead of failing to probe the MAC.

Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 846bf51f77b61..580a6defe1082 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -358,7 +358,11 @@ int stmmac_mdio_register(struct net_device *ndev)
 	new_bus->parent = priv->device;
 
 	err = of_mdiobus_register(new_bus, mdio_node);
-	if (err != 0) {
+	if (err == -ENODEV) {
+		err = 0;
+		dev_info(dev, "MDIO bus is disabled\n");
+		goto bus_register_fail;
+	} else if (err) {
 		dev_err_probe(dev, err, "Cannot register the MDIO bus\n");
 		goto bus_register_fail;
 	}
-- 
2.43.0

[PATCH 5.4 16/40] appletalk: Fix Use-After-Free in atalk_ioctl

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hyunwoo Kim <v4bel@theori.io>

[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ]

Because atalk_ioctl() accesses sk->sk_receive_queue
without holding a sk->sk_receive_queue.lock, it can
cause a race with atalk_recvmsg().
A use-after-free for skb occurs with the following flow.
```
atalk_ioctl() -> skb_peek()
atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
```
Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/appletalk/ddp.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 4610c352849bc..70cd5f55628d3 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1803,15 +1803,14 @@ static int atalk_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		break;
 	}
 	case TIOCINQ: {
-		/*
-		 * These two are safe on a single CPU system as only
-		 * user tasks fiddle here
-		 */
-		struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
+		struct sk_buff *skb;
 		long amount = 0;
 
+		spin_lock_irq(&sk->sk_receive_queue.lock);
+		skb = skb_peek(&sk->sk_receive_queue);
 		if (skb)
 			amount = skb->len - sizeof(struct ddpehdr);
+		spin_unlock_irq(&sk->sk_receive_queue.lock);
 		rc = put_user(amount, (int __user *)argp);
 		break;
 	}
-- 
2.43.0

[PATCH 5.4 17/40] cred: switch to using atomic_long_t

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

commit f8fa5d76925991976b3e7076f9d1052515ec1fca upstream.

There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.

With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/cred.h |    8 +++---
 kernel/cred.c        |   64 +++++++++++++++++++++++++--------------------------
 2 files changed, 36 insertions(+), 36 deletions(-)

--- a/include/linux/cred.h
+++ b/include/linux/cred.h
@@ -109,7 +109,7 @@ static inline int groups_search(const st
  * same context as task->real_cred.
  */
 struct cred {
-	atomic_t	usage;
+	atomic_long_t	usage;
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	atomic_t	subscribers;	/* number of processes subscribed */
 	void		*put_addr;
@@ -227,7 +227,7 @@ static inline bool cap_ambient_invariant
  */
 static inline struct cred *get_new_cred(struct cred *cred)
 {
-	atomic_inc(&cred->usage);
+	atomic_long_inc(&cred->usage);
 	return cred;
 }
 
@@ -259,7 +259,7 @@ static inline const struct cred *get_cre
 	struct cred *nonconst_cred = (struct cred *) cred;
 	if (!cred)
 		return NULL;
-	if (!atomic_inc_not_zero(&nonconst_cred->usage))
+	if (!atomic_long_inc_not_zero(&nonconst_cred->usage))
 		return NULL;
 	validate_creds(cred);
 	nonconst_cred->non_rcu = 0;
@@ -283,7 +283,7 @@ static inline void put_cred(const struct
 
 	if (cred) {
 		validate_creds(cred);
-		if (atomic_dec_and_test(&(cred)->usage))
+		if (atomic_long_dec_and_test(&(cred)->usage))
 			__put_cred(cred);
 	}
 }
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -98,17 +98,17 @@ static void put_cred_rcu(struct rcu_head
 
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	if (cred->magic != CRED_MAGIC_DEAD ||
-	    atomic_read(&cred->usage) != 0 ||
+	    atomic_long_read(&cred->usage) != 0 ||
 	    read_cred_subscribers(cred) != 0)
 		panic("CRED: put_cred_rcu() sees %p with"
-		      " mag %x, put %p, usage %d, subscr %d\n",
+		      " mag %x, put %p, usage %ld, subscr %d\n",
 		      cred, cred->magic, cred->put_addr,
-		      atomic_read(&cred->usage),
+		      atomic_long_read(&cred->usage),
 		      read_cred_subscribers(cred));
 #else
-	if (atomic_read(&cred->usage) != 0)
-		panic("CRED: put_cred_rcu() sees %p with usage %d\n",
-		      cred, atomic_read(&cred->usage));
+	if (atomic_long_read(&cred->usage) != 0)
+		panic("CRED: put_cred_rcu() sees %p with usage %ld\n",
+		      cred, atomic_long_read(&cred->usage));
 #endif
 
 	security_cred_free(cred);
@@ -131,11 +131,11 @@ static void put_cred_rcu(struct rcu_head
  */
 void __put_cred(struct cred *cred)
 {
-	kdebug("__put_cred(%p{%d,%d})", cred,
-	       atomic_read(&cred->usage),
+	kdebug("__put_cred(%p{%ld,%d})", cred,
+	       atomic_long_read(&cred->usage),
 	       read_cred_subscribers(cred));
 
-	BUG_ON(atomic_read(&cred->usage) != 0);
+	BUG_ON(atomic_long_read(&cred->usage) != 0);
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	BUG_ON(read_cred_subscribers(cred) != 0);
 	cred->magic = CRED_MAGIC_DEAD;
@@ -158,8 +158,8 @@ void exit_creds(struct task_struct *tsk)
 {
 	struct cred *cred;
 
-	kdebug("exit_creds(%u,%p,%p,{%d,%d})", tsk->pid, tsk->real_cred, tsk->cred,
-	       atomic_read(&tsk->cred->usage),
+	kdebug("exit_creds(%u,%p,%p,{%ld,%d})", tsk->pid, tsk->real_cred, tsk->cred,
+	       atomic_long_read(&tsk->cred->usage),
 	       read_cred_subscribers(tsk->cred));
 
 	cred = (struct cred *) tsk->real_cred;
@@ -218,7 +218,7 @@ struct cred *cred_alloc_blank(void)
 	if (!new)
 		return NULL;
 
-	atomic_set(&new->usage, 1);
+	atomic_long_set(&new->usage, 1);
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	new->magic = CRED_MAGIC;
 #endif
@@ -265,7 +265,7 @@ struct cred *prepare_creds(void)
 	memcpy(new, old, sizeof(struct cred));
 
 	new->non_rcu = 0;
-	atomic_set(&new->usage, 1);
+	atomic_long_set(&new->usage, 1);
 	set_cred_subscribers(new, 0);
 	get_group_info(new->group_info);
 	get_uid(new->user);
@@ -345,8 +345,8 @@ int copy_creds(struct task_struct *p, un
 		p->real_cred = get_cred(p->cred);
 		get_cred(p->cred);
 		alter_cred_subscribers(p->cred, 2);
-		kdebug("share_creds(%p{%d,%d})",
-		       p->cred, atomic_read(&p->cred->usage),
+		kdebug("share_creds(%p{%ld,%d})",
+		       p->cred, atomic_long_read(&p->cred->usage),
 		       read_cred_subscribers(p->cred));
 		atomic_inc(&p->cred->user->processes);
 		return 0;
@@ -436,8 +436,8 @@ int commit_creds(struct cred *new)
 	struct task_struct *task = current;
 	const struct cred *old = task->real_cred;
 
-	kdebug("commit_creds(%p{%d,%d})", new,
-	       atomic_read(&new->usage),
+	kdebug("commit_creds(%p{%ld,%d})", new,
+	       atomic_long_read(&new->usage),
 	       read_cred_subscribers(new));
 
 	BUG_ON(task->cred != old);
@@ -446,7 +446,7 @@ int commit_creds(struct cred *new)
 	validate_creds(old);
 	validate_creds(new);
 #endif
-	BUG_ON(atomic_read(&new->usage) < 1);
+	BUG_ON(atomic_long_read(&new->usage) < 1);
 
 	get_cred(new); /* we will require a ref for the subj creds too */
 
@@ -519,14 +519,14 @@ EXPORT_SYMBOL(commit_creds);
  */
 void abort_creds(struct cred *new)
 {
-	kdebug("abort_creds(%p{%d,%d})", new,
-	       atomic_read(&new->usage),
+	kdebug("abort_creds(%p{%ld,%d})", new,
+	       atomic_long_read(&new->usage),
 	       read_cred_subscribers(new));
 
 #ifdef CONFIG_DEBUG_CREDENTIALS
 	BUG_ON(read_cred_subscribers(new) != 0);
 #endif
-	BUG_ON(atomic_read(&new->usage) < 1);
+	BUG_ON(atomic_long_read(&new->usage) < 1);
 	put_cred(new);
 }
 EXPORT_SYMBOL(abort_creds);
@@ -542,8 +542,8 @@ const struct cred *override_creds(const
 {
 	const struct cred *old = current->cred;
 
-	kdebug("override_creds(%p{%d,%d})", new,
-	       atomic_read(&new->usage),
+	kdebug("override_creds(%p{%ld,%d})", new,
+	       atomic_long_read(&new->usage),
 	       read_cred_subscribers(new));
 
 	validate_creds(old);
@@ -565,8 +565,8 @@ const struct cred *override_creds(const
 	rcu_assign_pointer(current->cred, new);
 	alter_cred_subscribers(old, -1);
 
-	kdebug("override_creds() = %p{%d,%d}", old,
-	       atomic_read(&old->usage),
+	kdebug("override_creds() = %p{%ld,%d}", old,
+	       atomic_long_read(&old->usage),
 	       read_cred_subscribers(old));
 	return old;
 }
@@ -583,8 +583,8 @@ void revert_creds(const struct cred *old
 {
 	const struct cred *override = current->cred;
 
-	kdebug("revert_creds(%p{%d,%d})", old,
-	       atomic_read(&old->usage),
+	kdebug("revert_creds(%p{%ld,%d})", old,
+	       atomic_long_read(&old->usage),
 	       read_cred_subscribers(old));
 
 	validate_creds(old);
@@ -698,7 +698,7 @@ struct cred *prepare_kernel_cred(struct
 
 	*new = *old;
 	new->non_rcu = 0;
-	atomic_set(&new->usage, 1);
+	atomic_long_set(&new->usage, 1);
 	set_cred_subscribers(new, 0);
 	get_uid(new->user);
 	get_user_ns(new->user_ns);
@@ -808,8 +808,8 @@ static void dump_invalid_creds(const str
 	       cred == tsk->cred ? "[eff]" : "");
 	printk(KERN_ERR "CRED: ->magic=%x, put_addr=%p\n",
 	       cred->magic, cred->put_addr);
-	printk(KERN_ERR "CRED: ->usage=%d, subscr=%d\n",
-	       atomic_read(&cred->usage),
+	printk(KERN_ERR "CRED: ->usage=%ld, subscr=%d\n",
+	       atomic_long_read(&cred->usage),
 	       read_cred_subscribers(cred));
 	printk(KERN_ERR "CRED: ->*uid = { %d,%d,%d,%d }\n",
 		from_kuid_munged(&init_user_ns, cred->uid),
@@ -881,9 +881,9 @@ EXPORT_SYMBOL(__validate_process_creds);
  */
 void validate_creds_for_do_exit(struct task_struct *tsk)
 {
-	kdebug("validate_creds_for_do_exit(%p,%p{%d,%d})",
+	kdebug("validate_creds_for_do_exit(%p,%p{%ld,%d})",
 	       tsk->real_cred, tsk->cred,
-	       atomic_read(&tsk->cred->usage),
+	       atomic_long_read(&tsk->cred->usage),
 	       read_cred_subscribers(tsk->cred));
 
 	__validate_process_creds(tsk, __FILE__, __LINE__);

[PATCH 5.4 18/40] ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

commit 924f5ca2975b2993ee81a7ecc3c809943a70f334 upstream.

On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec
pins are not registered properly without the force-connect quirk. The
codec will report only one pin as having external connectivity, but i915
finds all three connectors on the system, so the two drivers are not
in sync.

Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_hdmi.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1822,6 +1822,8 @@ static const struct snd_pci_quirk force_
 	SND_PCI_QUIRK(0x103c, 0x871a, "HP", 1),
 	SND_PCI_QUIRK(0x103c, 0x8711, "HP", 1),
 	SND_PCI_QUIRK(0x103c, 0x8715, "HP", 1),
+	SND_PCI_QUIRK(0x1043, 0x86ae, "ASUS", 1),  /* Z170 PRO */
+	SND_PCI_QUIRK(0x1043, 0x86c7, "ASUS", 1),  /* Z170M PLUS */
 	SND_PCI_QUIRK(0x1462, 0xec94, "MS-7C94", 1),
 	{}
 };

[PATCH 5.4 19/40] Revert "PCI: acpiphp: Reassign resources on bridge if necessary"

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream.

This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the
subsequent fix to it:

  cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")

40613da52b13 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.

cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.

Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other
problems:

  - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
    sometimes.

  - Dongli reported a similar problem with hot-add of SCSI disks.

  - Jonathan reported a console freeze during boot on bare metal due to an
    error in radeon GPU initialization.

Revert both patches to avoid adding these problems.  This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da52b13 and
cc22522fd55e were intended to fix.

Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com
Reported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/hotplug/acpiphp_glue.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -510,15 +510,12 @@ static void enable_slot(struct acpiphp_s
 				if (pass && dev->subordinate) {
 					check_hotplug_bridge(slot, dev);
 					pcibios_resource_survey_bus(dev->subordinate);
-					if (pci_is_root_bus(bus))
-						__pci_bus_size_bridges(dev->subordinate, &add_list);
+					__pci_bus_size_bridges(dev->subordinate,
+							       &add_list);
 				}
 			}
 		}
-		if (pci_is_root_bus(bus))
-			__pci_bus_assign_resources(bus, &add_list, NULL);
-		else
-			pci_assign_unassigned_bridge_resources(bus->self);
+		__pci_bus_assign_resources(bus, &add_list, NULL);
 	}
 
 	acpiphp_sanitize_bus(bus);

[PATCH 5.4 20/40] usb: aqc111: check packet for fixup for true limit

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ]

If a device sends a packet that is inbetween 0
and sizeof(u64) the value passed to skb_trim()
as length will wrap around ending up as some very
large value.

The driver will then proceed to parse the header
located at that position, which will either oops or
process some random value.

The fix is to check against sizeof(u64) rather than
0, which the driver currently does. The issue exists
since the introduction of the driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/aqc111.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index 68912e266826b..892d58b38cf5b 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -1079,17 +1079,17 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	u16 pkt_count = 0;
 	u64 desc_hdr = 0;
 	u16 vlan_tag = 0;
-	u32 skb_len = 0;
+	u32 skb_len;
 
 	if (!skb)
 		goto err;
 
-	if (skb->len == 0)
+	skb_len = skb->len;
+	if (skb_len < sizeof(desc_hdr))
 		goto err;
 
-	skb_len = skb->len;
 	/* RX Descriptor Header */
-	skb_trim(skb, skb->len - sizeof(desc_hdr));
+	skb_trim(skb, skb_len - sizeof(desc_hdr));
 	desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb));
 
 	/* Check these packets */
-- 
2.43.0

[PATCH 5.4 21/40] blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]

Inside blkg_for_each_descendant_pre(), both
css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock,
and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held()
is called.

Fix the warning by adding rcu read lock.

Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-throttle.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index bd870f9ae4586..43444934b9850 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -1374,6 +1374,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global)
 		   tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE),
 		   tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));
 
+	rcu_read_lock();
 	/*
 	 * Update has_rules[] flags for the updated tg's subtree.  A tg is
 	 * considered to have rules if either the tg itself or any of its
@@ -1401,6 +1402,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global)
 		this_tg->latency_target = max(this_tg->latency_target,
 				parent_tg->latency_target);
 	}
+	rcu_read_unlock();
 
 	/*
 	 * We're already holding queue_lock and know @tg is valid.  Let's
-- 
2.43.0

[PATCH 5.4 22/40] bcache: avoid oversize memory allocation by small stripe_size

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Coly Li <colyli@suse.de>

[ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ]

Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.

Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.

For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.

To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size by a value multiplying limits.io_opt and euqal or
  large than BCH_MIN_STRIPE_SZ.

Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.

Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.

Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/bcache.h | 1 +
 drivers/md/bcache/super.c  | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 1dd9298cb0e02..7bce582788458 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -265,6 +265,7 @@ struct bcache_device {
 #define BCACHE_DEV_WB_RUNNING		3
 #define BCACHE_DEV_RATE_DW_RUNNING	4
 	int			nr_stripes;
+#define BCH_MIN_STRIPE_SZ		((4 << 20) >> SECTOR_SHIFT)
 	unsigned int		stripe_size;
 	atomic_t		*stripe_sectors_dirty;
 	unsigned long		*full_dirty_stripes;
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 6afaa5e852837..d5f57a9551dda 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -822,6 +822,8 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
 
 	if (!d->stripe_size)
 		d->stripe_size = 1 << 31;
+	else if (d->stripe_size < BCH_MIN_STRIPE_SZ)
+		d->stripe_size = roundup(BCH_MIN_STRIPE_SZ, d->stripe_size);
 
 	n = DIV_ROUND_UP_ULL(sectors, d->stripe_size);
 	if (!n || n > max_stripes) {
-- 
2.43.0

[PATCH 5.4 23/40] bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc()

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Coly Li <colyli@suse.de>

[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ]

This patch adds code comments to bch_btree_node_get() and
__bch_btree_node_alloc() that NULL pointer will not be returned and it
is unnecessary to check NULL pointer by the callers of these routines.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/btree.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index ad1faee2e186b..5db893d6a824e 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -1020,6 +1020,9 @@ static struct btree *mca_alloc(struct cache_set *c, struct btree_op *op,
  *
  * The btree node will have either a read or a write lock held, depending on
  * level and op->lock.
+ *
+ * Note: Only error code or btree pointer will be returned, it is unncessary
+ *       for callers to check NULL pointer.
  */
 struct btree *bch_btree_node_get(struct cache_set *c, struct btree_op *op,
 				 struct bkey *k, int level, bool write,
@@ -1132,6 +1135,10 @@ static void btree_node_free(struct btree *b)
 	mutex_unlock(&b->c->bucket_lock);
 }
 
+/*
+ * Only error code or btree pointer will be returned, it is unncessary for
+ * callers to check NULL pointer.
+ */
 struct btree *__bch_btree_node_alloc(struct cache_set *c, struct btree_op *op,
 				     int level, bool wait,
 				     struct btree *parent)
-- 
2.43.0

[PATCH 5.4 24/40] bcache: avoid NULL checking to c->root in run_cache_set()

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Coly Li <colyli@suse.de>

[ Upstream commit 3eba5e0b2422aec3c9e79822029599961fdcab97 ]

In run_cache_set() after c->root returned from bch_btree_node_get(), it
is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL
because bch_btree_node_get() will not return NULL pointer to caller.

This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index d5f57a9551dda..5d1a4eb816694 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1908,7 +1908,7 @@ static int run_cache_set(struct cache_set *c)
 		c->root = bch_btree_node_get(c, NULL, k,
 					     j->btree_level,
 					     true, NULL);
-		if (IS_ERR_OR_NULL(c->root))
+		if (IS_ERR(c->root))
 			goto err;
 
 		list_del_init(&c->root->list);
-- 
2.43.0

[PATCH 5.4 25/40] platform/x86: intel_telemetry: Fix kernel doc descriptions

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]

LKP found issues with a kernel doc in the driver:

core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'

It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_telemetry_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel_telemetry_core.c b/drivers/platform/x86/intel_telemetry_core.c
index d4040bb222b48..59fc6624b1ac9 100644
--- a/drivers/platform/x86/intel_telemetry_core.c
+++ b/drivers/platform/x86/intel_telemetry_core.c
@@ -102,7 +102,7 @@ static const struct telemetry_core_ops telm_defpltops = {
 /**
  * telemetry_update_events() - Update telemetry Configuration
  * @pss_evtconfig: PSS related config. No change if num_evts = 0.
- * @pss_evtconfig: IOSS related config. No change if num_evts = 0.
+ * @ioss_evtconfig: IOSS related config. No change if num_evts = 0.
  *
  * This API updates the IOSS & PSS Telemetry configuration. Old config
  * is overwritten. Call telemetry_reset_events when logging is over
@@ -176,7 +176,7 @@ EXPORT_SYMBOL_GPL(telemetry_reset_events);
 /**
  * telemetry_get_eventconfig() - Returns the pss and ioss events enabled
  * @pss_evtconfig: Pointer to PSS related configuration.
- * @pss_evtconfig: Pointer to IOSS related configuration.
+ * @ioss_evtconfig: Pointer to IOSS related configuration.
  * @pss_len:	   Number of u32 elements allocated for pss_evtconfig array
  * @ioss_len:	   Number of u32 elements allocated for ioss_evtconfig array
  *
-- 
2.43.0

[PATCH 5.4 26/40] HID: add ALWAYS_POLL quirk for Apple kb

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ]

These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index fae784df084d5..fd84661df5fa7 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -33,6 +33,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AKAI, USB_DEVICE_ID_AKAI_MPKMINI2), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD), HID_QUIRK_BADPAD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AMI, USB_DEVICE_ID_AMI_VIRT_KEYBOARD_AND_MOUSE), HID_QUIRK_ALWAYS_POLL },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM), HID_QUIRK_NOGET },
-- 
2.43.0

[PATCH 5.4 27/40] HID: hid-asus: reset the backlight brightness level on resume

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis Benato <benato.denis96@gmail.com>

[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]

Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.

Fix the above issue by setting back brightness to the level it had
before entering a sleep state.

Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-asus.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index e15ba7f5fe0a0..ce0fade00a183 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -908,6 +908,24 @@ static int asus_start_multitouch(struct hid_device *hdev)
 	return 0;
 }
 
+static int __maybe_unused asus_resume(struct hid_device *hdev) {
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+	int ret = 0;
+
+	if (drvdata->kbd_backlight) {
+		const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4,
+				drvdata->kbd_backlight->cdev.brightness };
+		ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+		if (ret < 0) {
+			hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret);
+			goto asus_resume_err;
+		}
+	}
+
+asus_resume_err:
+	return ret;
+}
+
 static int __maybe_unused asus_reset_resume(struct hid_device *hdev)
 {
 	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
@@ -1185,6 +1203,7 @@ static struct hid_driver asus_driver = {
 	.input_configured       = asus_input_configured,
 #ifdef CONFIG_PM
 	.reset_resume           = asus_reset_resume,
+	.resume					= asus_resume,
 #endif
 	.event			= asus_event,
 	.raw_event		= asus_raw_event
-- 
2.43.0

[PATCH 5.4 28/40] HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aoba K <nexp_0x17@outlook.com>

[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]

Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host.  The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.

The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present.  As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.

Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-multitouch.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 590b25460456b..c37399f61c67b 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2003,6 +2003,11 @@ static const struct hid_device_id mt_devices[] = {
 		MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT,
 			USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
 
+	/* HONOR GLO-GXXX panel */
+	{ .driver_data = MT_CLS_VTL,
+		HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8,
+			0x347d, 0x7853) },
+
 	/* Ilitek dual touch panel */
 	{  .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,
-- 
2.43.0

[PATCH 5.4 29/40] asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ]

We really don't want to do atomic_read() or anything like that, since we
already have the value, not the lock.  The whole point of this is that
we've loaded the lock from memory, and we want to check whether the
value we loaded was a locked one or not.

The main use of this is the lockref code, which loads both the lock and
the reference count in one atomic operation, and then works on that
combined value.  With the atomic_read(), the compiler would pointlessly
spill the value to the stack, in order to then be able to read it back
"atomically".

This is the qspinlock version of commit c6f4a9002252 ("asm-generic:
ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same
bug for ticket locks.

Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/qspinlock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-generic/qspinlock.h b/include/asm-generic/qspinlock.h
index fde943d180e03..6dc2269a5398a 100644
--- a/include/asm-generic/qspinlock.h
+++ b/include/asm-generic/qspinlock.h
@@ -38,7 +38,7 @@ static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
  */
 static __always_inline int queued_spin_value_unlocked(struct qspinlock lock)
 {
-	return !atomic_read(&lock.val);
+	return !lock.val.counter;
 }
 
 /**
-- 
2.43.0

[PATCH 5.4 30/40] net: usb: qmi_wwan: claim interface 4 for ZTE MF290

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lech Perczak <lech.perczak@gmail.com>

[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]

Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:

Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0189 Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index ebc1f01d5ea27..c2bd4abce6de5 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1247,6 +1247,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
 	{QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
 	{QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0189, 4)},    /* ZTE MF290 */
 	{QMI_FIXED_INTF(0x19d2, 0x0191, 4)},	/* ZTE EuFi890 */
 	{QMI_FIXED_INTF(0x19d2, 0x0199, 1)},	/* ZTE MF820S */
 	{QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
-- 
2.43.0

[PATCH 5.4 31/40] HID: hid-asus: add const to read-only outgoing usb buffer

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denis Benato <benato.denis96@gmail.com>

[ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ]

In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.

Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-asus.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index ce0fade00a183..dea9268629056 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -336,7 +336,7 @@ static int asus_raw_event(struct hid_device *hdev,
 	return 0;
 }
 
-static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size)
+static int asus_kbd_set_report(struct hid_device *hdev, const u8 *buf, size_t buf_size)
 {
 	unsigned char *dmabuf;
 	int ret;
@@ -355,7 +355,7 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
 
 static int asus_kbd_init(struct hid_device *hdev)
 {
-	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
+	const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
 		     0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
 	int ret;
 
@@ -369,7 +369,7 @@ static int asus_kbd_init(struct hid_device *hdev)
 static int asus_kbd_get_functions(struct hid_device *hdev,
 				  unsigned char *kbd_func)
 {
-	u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
+	const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
 	u8 *readbuf;
 	int ret;
 
-- 
2.43.0

[PATCH 5.4 32/40] perf: Fix perf_event_validate_size() lockdep splat

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit 7e2c1e4b34f07d9aa8937fab88359d4a0fce468e upstream.

When lockdep is enabled, the for_each_sibling_event(sibling, event)
macro checks that event->ctx->mutex is held. When creating a new group
leader event, we call perf_event_validate_size() on a partially
initialized event where event->ctx is NULL, and so when
for_each_sibling_event() attempts to check event->ctx->mutex, we get a
splat, as reported by Lucas De Marchi:

  WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080

This only happens for a new event which is its own group_leader, and in
this case there cannot be any sibling events. Thus it's safe to skip the
check for siblings, which avoids having to make invasive and ugly
changes to for_each_sibling_event().

Avoid the splat by bailing out early when the new event is its own
group_leader.

Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()")
Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/
Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1835,6 +1835,16 @@ static bool perf_event_validate_size(str
 				   group_leader->nr_siblings + 1) > 16*1024)
 		return false;
 
+	/*
+	 * When creating a new group leader, group_leader->ctx is initialized
+	 * after the size has been validated, but we cannot safely use
+	 * for_each_sibling_event() until group_leader->ctx is set. A new group
+	 * leader cannot have any siblings yet, so we can safely skip checking
+	 * the non-existent siblings.
+	 */
+	if (event == group_leader)
+		return true;
+
 	for_each_sibling_event(sibling, group_leader) {
 		if (__perf_event_read_size(sibling->attr.read_format,
 					   group_leader->nr_siblings + 1) > 16*1024)

[PATCH 5.4 33/40] soundwire: stream: fix NULL pointer dereference for multi_link

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit e199bf52ffda8f98f129728d57244a9cd9ad5623 upstream.

If bus is marked as multi_link, but number of masters in the stream is
not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >=
bus->hw_sync_min_links), bank switching should not happen.  The first
part of do_bank_switch() code properly takes these conditions into
account, but second part (sdw_ml_sync_bank_switch()) relies purely on
bus->multi_link property.  This is not balanced and leads to NULL
pointer dereference:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  ...
  Call trace:
   wait_for_completion_timeout+0x124/0x1f0
   do_bank_switch+0x370/0x6f8
   sdw_prepare_stream+0x2d0/0x438
   qcom_snd_sdw_prepare+0xa0/0x118
   sm8450_snd_prepare+0x128/0x148
   snd_soc_link_prepare+0x5c/0xe8
   __soc_pcm_prepare+0x28/0x1ec
   dpcm_be_dai_prepare+0x1e0/0x2c0
   dpcm_fe_dai_prepare+0x108/0x28c
   snd_pcm_do_prepare+0x44/0x68
   snd_pcm_action_single+0x54/0xc0
   snd_pcm_action_nonatomic+0xe4/0xec
   snd_pcm_prepare+0xc4/0x114
   snd_pcm_common_ioctl+0x1154/0x1cc0
   snd_pcm_ioctl+0x54/0x74

Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soundwire/stream.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -709,14 +709,15 @@ error_1:
  * sdw_ml_sync_bank_switch: Multilink register bank switch
  *
  * @bus: SDW bus instance
+ * @multi_link: whether this is a multi-link stream with hardware-based sync
  *
  * Caller function should free the buffers on error
  */
-static int sdw_ml_sync_bank_switch(struct sdw_bus *bus)
+static int sdw_ml_sync_bank_switch(struct sdw_bus *bus, bool multi_link)
 {
 	unsigned long time_left;
 
-	if (!bus->multi_link)
+	if (!multi_link)
 		return 0;
 
 	/* Wait for completion of transfer */
@@ -809,7 +810,7 @@ static int do_bank_switch(struct sdw_str
 			bus->bank_switch_timeout = DEFAULT_BANK_SWITCH_TIMEOUT;
 
 		/* Check if bank switch was successful */
-		ret = sdw_ml_sync_bank_switch(bus);
+		ret = sdw_ml_sync_bank_switch(bus, multi_link);
 		if (ret < 0) {
 			dev_err(bus->dev,
 				"multi link bank switch failed: %d\n", ret);

[PATCH 5.4 34/40] ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baokun Li <libaokun1@huawei.com>

commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream.

For files with logical blocks close to EXT_MAX_BLOCKS, the file size
predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS.
This can cause some blocks to be preallocated that will not be used.
And after [Fixes], the following issue may be triggered:

=========================================================
 kernel BUG at fs/ext4/mballoc.c:4653!
 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
 CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f
 Hardware name: linux,dummy-virt (DT)
 pc : ext4_mb_use_inode_pa+0x148/0x208
 lr : ext4_mb_use_inode_pa+0x98/0x208
 Call trace:
  ext4_mb_use_inode_pa+0x148/0x208
  ext4_mb_new_inode_pa+0x240/0x4a8
  ext4_mb_use_best_found+0x1d4/0x208
  ext4_mb_try_best_found+0xc8/0x110
  ext4_mb_regular_allocator+0x11c/0xf48
  ext4_mb_new_blocks+0x790/0xaa8
  ext4_ext_map_blocks+0x7cc/0xd20
  ext4_map_blocks+0x170/0x600
  ext4_iomap_begin+0x1c0/0x348
=========================================================

Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa():

	ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len);
	if (ac->ac_o_ex.fe_logical >= ex.fe_logical)
		goto adjust_bex;

The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len
it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to
overflow to a very small value, which ultimately triggers a BUG_ON in
ext4_mb_new_inode_pa() because pa->pa_free < len.

The last logical block of an actual write request does not exceed
EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing
the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue.

The test case in [Link] can reproduce the above issue with 64k block size.

Link: https://patchwork.kernel.org/project/fstests/list/?series=804003
Cc:  <stable@kernel.org> # 6.4
Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/mballoc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3182,6 +3182,10 @@ ext4_mb_normalize_request(struct ext4_al
 	start = max(start, rounddown(ac->ac_o_ex.fe_logical,
 			(ext4_lblk_t)EXT4_BLOCKS_PER_GROUP(ac->ac_sb)));
 
+	/* avoid unnecessary preallocation that may trigger assertions */
+	if (start + size > EXT_MAX_BLOCKS)
+		size = EXT_MAX_BLOCKS - start;
+
 	/* don't cover already allocated blocks in selected range */
 	if (ar->pleft && start <= ar->lleft) {
 		size -= ar->lleft + 1 - start;

[PATCH 5.4 35/40] arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Houghton <jthoughton@google.com>

commit 3c0696076aad60a2f04c019761921954579e1b0e upstream.

It is currently possible for a userspace application to enter an
infinite page fault loop when using HugeTLB pages implemented with
contiguous PTEs when HAFDBS is not available. This happens because:

1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean
   (PTE_DIRTY | PTE_RDONLY | PTE_WRITE).

2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling
   the memory access on a system without HAFDBS, we will get a page
   fault.

3. HugeTLB will check if it needs to update the dirty bits on the PTE.
   For contiguous PTEs, it will check to see if the pgprot bits need
   updating. In this case, HugeTLB wants to write a sequence of
   sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about
   to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()),
   so it thinks no update is necessary.

We can get the kernel to write a sw-dirty, hw-clean PTE with the
following steps (showing the relevant VMA flags and pgprot bits):

i.   Create a valid, writable contiguous PTE.
       VMA vmflags:     VM_SHARED | VM_READ | VM_WRITE
       VMA pgprot bits: PTE_RDONLY | PTE_WRITE
       PTE pgprot bits: PTE_DIRTY | PTE_WRITE

ii.  mprotect the VMA to PROT_NONE.
       VMA vmflags:     VM_SHARED
       VMA pgprot bits: PTE_RDONLY
       PTE pgprot bits: PTE_DIRTY | PTE_RDONLY

iii. mprotect the VMA back to PROT_READ | PROT_WRITE.
       VMA vmflags:     VM_SHARED | VM_READ | VM_WRITE
       VMA pgprot bits: PTE_RDONLY | PTE_WRITE
       PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY

Make it impossible to create a writeable sw-dirty, hw-clean PTE with
pte_modify(). Such a PTE should be impossible to create, and there may
be places that assume that pte_dirty() implies pte_hw_dirty().

Signed-off-by: James Houghton <jthoughton@google.com>
Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags")
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/pgtable.h |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -679,6 +679,12 @@ static inline pte_t pte_modify(pte_t pte
 	if (pte_hw_dirty(pte))
 		pte = pte_mkdirty(pte);
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	/*
+	 * If we end up clearing hw dirtiness for a sw-dirty PTE, set hardware
+	 * dirtiness again.
+	 */
+	if (pte_sw_dirty(pte))
+		pte = pte_mkdirty(pte);
 	return pte;
 }
 

[PATCH 5.4 36/40] team: Fix use-after-free when an option instance allocation fails

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florent Revest <revest@chromium.org>

commit c12296bbecc488623b7d1932080e394d08f3226b upstream.

In __team_options_register, team_options are allocated and appended to
the team's option_list.
If one option instance allocation fails, the "inst_rollback" cleanup
path frees the previously allocated options but doesn't remove them from
the team's option_list.
This leaves dangling pointers that can be dereferenced later by other
parts of the team driver that iterate over options.

This patch fixes the cleanup path to remove the dangling pointers from
the list.

As far as I can tell, this uaf doesn't have much security implications
since it would be fairly hard to exploit (an attacker would need to make
the allocation of that specific small object fail) but it's still nice
to fix.

Cc: stable@vger.kernel.org
Fixes: 80f7c6683fe0 ("team: add support for per-port options")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231206123719.1963153-1-revest@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/team/team.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -284,8 +284,10 @@ static int __team_options_register(struc
 	return 0;
 
 inst_rollback:
-	for (i--; i >= 0; i--)
+	for (i--; i >= 0; i--) {
 		__team_option_inst_del_option(team, dst_opts[i]);
+		list_del(&dst_opts[i]->list);
+	}
 
 	i = option_count;
 alloc_rollback:

[PATCH 5.4 37/40] ring-buffer: Fix memory leak of free page

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <rostedt@goodmis.org>

commit 17d801758157bec93f26faaf5ff1a8b9a552d67a upstream.

Reading the ring buffer does a swap of a sub-buffer within the ring buffer
with a empty sub-buffer. This allows the reader to have full access to the
content of the sub-buffer that was swapped out without having to worry
about contention with the writer.

The readers call ring_buffer_alloc_read_page() to allocate a page that
will be used to swap with the ring buffer. When the code is finished with
the reader page, it calls ring_buffer_free_read_page(). Instead of freeing
the page, it stores it as a spare. Then next call to
ring_buffer_alloc_read_page() will return this spare instead of calling
into the memory management system to allocate a new page.

Unfortunately, on freeing of the ring buffer, this spare page is not
freed, and causes a memory leak.

Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home

Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/ring_buffer.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1414,6 +1414,8 @@ static void rb_free_cpu_buffer(struct ri
 		free_buffer_page(bpage);
 	}
 
+	free_page((unsigned long)cpu_buffer->free_page);
+
 	kfree(cpu_buffer);
 }
 

[PATCH 5.4 38/40] mmc: block: Be sure to wait while busy in CQE error recovery

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

commit c616696a902987352426fdaeec1b0b3240949e6b upstream.

STOP command does not guarantee to wait while busy, but subsequent command
MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so
be sure to wait by employing mmc_poll_for_busy().

Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/core.c    |    2 ++
 drivers/mmc/core/mmc_ops.c |    5 +++--
 drivers/mmc/core/mmc_ops.h |    2 ++
 3 files changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -570,6 +570,8 @@ int mmc_cqe_recovery(struct mmc_host *ho
 	cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT;
 	mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 
+	mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, true, true);
+
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.opcode       = MMC_CMDQ_TASK_MGMT;
 	cmd.arg          = 1; /* Discard entire queue */
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -450,8 +450,8 @@ int mmc_switch_status(struct mmc_card *c
 	return __mmc_switch_status(card, true);
 }
 
-static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
-			bool send_status, bool retry_crc_err)
+int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+		      bool send_status, bool retry_crc_err)
 {
 	struct mmc_host *host = card->host;
 	int err;
@@ -504,6 +504,7 @@ static int mmc_poll_for_busy(struct mmc_
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(mmc_poll_for_busy);
 
 /**
  *	__mmc_switch - modify EXT_CSD register
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -31,6 +31,8 @@ int mmc_can_ext_csd(struct mmc_card *car
 int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
 int mmc_switch_status(struct mmc_card *card);
 int __mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
+int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+		      bool send_status, bool retry_crc_err);
 int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		unsigned int timeout_ms, unsigned char timing,
 		bool use_busy_signal, bool send_status,	bool retry_crc_err);

[PATCH 5.4 39/40] powerpc/ftrace: Create a dummy stackframe to fix stack unwind

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen N Rao <naveen@kernel.org>

commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream.

With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to
call into ftrace are emitted right at function entry. The instruction
sequence used is minimal to reduce overhead. Crucially, a stackframe is
not created for the function being traced. This breaks stack unwinding
since the function being traced does not have a stackframe for itself.
As such, it never shows up in the backtrace:

/sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled
/sys/kernel/debug/tracing # cat stack_trace
        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     4144      32   ftrace_call+0x4/0x44
  1)     4112     432   get_page_from_freelist+0x26c/0x1ad0
  2)     3680     496   __alloc_pages+0x290/0x1280
  3)     3184     336   __folio_alloc+0x34/0x90
  4)     2848     176   vma_alloc_folio+0xd8/0x540
  5)     2672     272   __handle_mm_fault+0x700/0x1cc0
  6)     2400     208   handle_mm_fault+0xf0/0x3f0
  7)     2192      80   ___do_page_fault+0x3e4/0xbe0
  8)     2112     160   do_page_fault+0x30/0xc0
  9)     1952     256   data_access_common_virt+0x210/0x220
 10)     1696     400   0xc00000000f16b100
 11)     1296     384   load_elf_binary+0x804/0x1b80
 12)      912     208   bprm_execve+0x2d8/0x7e0
 13)      704      64   do_execveat_common+0x1d0/0x2f0
 14)      640     160   sys_execve+0x54/0x70
 15)      480      64   system_call_exception+0x138/0x350
 16)      416     416   system_call_common+0x160/0x2c4

Fix this by having ftrace create a dummy stackframe for the function
being traced. With this, backtraces now capture the function being
traced:

/sys/kernel/debug/tracing # cat stack_trace
        Depth    Size   Location    (17 entries)
        -----    ----   --------
  0)     3888      32   _raw_spin_trylock+0x8/0x70
  1)     3856     576   get_page_from_freelist+0x26c/0x1ad0
  2)     3280      64   __alloc_pages+0x290/0x1280
  3)     3216     336   __folio_alloc+0x34/0x90
  4)     2880     176   vma_alloc_folio+0xd8/0x540
  5)     2704     416   __handle_mm_fault+0x700/0x1cc0
  6)     2288      96   handle_mm_fault+0xf0/0x3f0
  7)     2192      48   ___do_page_fault+0x3e4/0xbe0
  8)     2144     192   do_page_fault+0x30/0xc0
  9)     1952     608   data_access_common_virt+0x210/0x220
 10)     1344      16   0xc0000000334bbb50
 11)     1328     416   load_elf_binary+0x804/0x1b80
 12)      912      64   bprm_execve+0x2d8/0x7e0
 13)      848     176   do_execveat_common+0x1d0/0x2f0
 14)      672     192   sys_execve+0x54/0x70
 15)      480      64   system_call_exception+0x138/0x350
 16)      416     416   system_call_common+0x160/0x2c4

This results in two additional stores in the ftrace entry code, but
produces reliable backtraces.

Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI")
Cc: stable@vger.kernel.org
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
+++ b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
@@ -36,6 +36,9 @@ _GLOBAL(ftrace_regs_caller)
 	/* Save the original return address in A's stack frame */
 	std	r0,LRSAVE(r1)
 
+	/* Create a minimal stack frame for representing B */
+	stdu	r1, -STACK_FRAME_MIN_SIZE(r1)
+
 	/* Create our stack frame + pt_regs */
 	stdu	r1,-SWITCH_FRAME_SIZE(r1)
 
@@ -65,6 +68,8 @@ _GLOBAL(ftrace_regs_caller)
 	mflr	r7
 	/* Save it as pt_regs->nip */
 	std     r7, _NIP(r1)
+	/* Also save it in B's stackframe header for proper unwind */
+	std	r7, LRSAVE+SWITCH_FRAME_SIZE(r1)
 	/* Save the read LR in pt_regs->link */
 	std     r0, _LINK(r1)
 
@@ -121,7 +126,7 @@ ftrace_regs_call:
 	ld	r2, 24(r1)
 
 	/* Pop our stack frame */
-	addi r1, r1, SWITCH_FRAME_SIZE
+	addi r1, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
 
 #ifdef CONFIG_LIVEPATCH
         /* Based on the cmpd above, if the NIP was altered handle livepatch */
@@ -153,6 +158,9 @@ _GLOBAL(ftrace_caller)
 	/* Save the original return address in A's stack frame */
 	std	r0, LRSAVE(r1)
 
+	/* Create a minimal stack frame for representing B */
+	stdu	r1, -STACK_FRAME_MIN_SIZE(r1)
+
 	/* Create our stack frame + pt_regs */
 	stdu	r1, -SWITCH_FRAME_SIZE(r1)
 
@@ -166,6 +174,7 @@ _GLOBAL(ftrace_caller)
 	/* Get the _mcount() call site out of LR */
 	mflr	r7
 	std     r7, _NIP(r1)
+	std	r7, LRSAVE+SWITCH_FRAME_SIZE(r1)
 
 	/* Save callee's TOC in the ABI compliant location */
 	std	r2, 24(r1)
@@ -200,7 +209,7 @@ ftrace_call:
 	ld	r2, 24(r1)
 
 	/* Pop our stack frame */
-	addi	r1, r1, SWITCH_FRAME_SIZE
+	addi	r1, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
 
 	/* Reload original LR */
 	ld	r0, LRSAVE(r1)

[PATCH 5.4 40/40] powerpc/ftrace: Fix stack teardown in ftrace_no_trace

[Greg Kroah-Hartman]

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen N Rao <naveen@kernel.org>

commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream.

Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix
stack unwind") added use of a new stack frame on ftrace entry to fix
stack unwind. However, the commit missed updating the offset used while
tearing down the ftrace stack when ftrace is disabled. Fix the same.

In addition, the commit missed saving the correct stack pointer in
pt_regs. Update the same.

Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
+++ b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
@@ -55,7 +55,7 @@ _GLOBAL(ftrace_regs_caller)
 	SAVE_10GPRS(22, r1)
 
 	/* Save previous stack pointer (r1) */
-	addi	r8, r1, SWITCH_FRAME_SIZE
+	addi	r8, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
 	std	r8, GPR1(r1)
 
 	/* Load special regs for save below */
@@ -150,7 +150,7 @@ ftrace_no_trace:
 	mflr	r3
 	mtctr	r3
 	REST_GPR(3, r1)
-	addi	r1, r1, SWITCH_FRAME_SIZE
+	addi	r1, r1, SWITCH_FRAME_SIZE+STACK_FRAME_MIN_SIZE
 	mtlr	r0
 	bctr
 

Re: [PATCH 5.4 00/40] 5.4.265-rc1 review

[Shuah Khan]

On 12/18/23 06:51, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.265 release.
> There are 40 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.265-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/40] 5.4.265-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 18/12/23 7:21 pm, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.265 release.
> There are 40 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000.
> Anything received after that time might be too late.
> 

No problems seen on x86_64 and aarch64 with our testing.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit

> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.265-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Re: [PATCH 5.4 00/40] 5.4.265-rc1 review

[Naresh Kamboju]

On Mon, 18 Dec 2023 at 19:40, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.265 release.
> There are 40 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.265-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.265-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 2be881e1152507e5593dc93294d1b0c3127350e2
* git describe: v5.4.264-41-g2be881e11525
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.264-41-g2be881e11525

## Test Regressions (compared to v5.4.264)

## Metric Regressions (compared to v5.4.264)

## Test Fixes (compared to v5.4.264)

## Metric Fixes (compared to v5.4.264)

## Test result summary
total: 93105, pass: 72959, fail: 2338, skip: 17758, xfail: 50

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 148 total, 148 passed, 0 failed
* arm64: 47 total, 45 passed, 2 failed
* i386: 30 total, 24 passed, 6 failed
* mips: 27 total, 27 passed, 0 failed
* parisc: 3 total, 0 passed, 3 failed
* powerpc: 32 total, 32 passed, 0 failed
* riscv: 15 total, 15 passed, 0 failed
* s390: 8 total, 8 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 41 total, 41 passed, 0 failed

## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-vm
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/40] 5.4.265-rc1 review

[Jon Hunter]

On Mon, 18 Dec 2023 14:51:55 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.265 release.
> There are 40 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.265-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    10 builds:	10 pass, 0 fail
    24 boots:	24 pass, 0 fail
    54 tests:	54 pass, 0 fail

Linux version:	5.4.265-rc1-g2be881e11525
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.4 00/40] 5.4.265-rc1 review

[Florian Fainelli]

On 12/18/2023 2:51 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.265 release.
> There are 40 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 20 Dec 2023 13:50:31 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.265-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian