[PATCH AUTOSEL 6.1 01/24] Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

[PATCH AUTOSEL 6.1 01/24] Input: psmouse - enable Synaptics InterTouch for ThinkPad L14 G1

[Sasha Levin]

From: José Pekkarinen <jose.pekkarinen@foxhound.fi>

[ Upstream commit c1f342f35f820b33390571293498c3e2e9bc77ec ]

Observed on dmesg of my laptop I see the following
output:

[   19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[   19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[   19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[   20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   20.397608] mousedev: PS/2 mouse device common for all mice

This patch will add its pnp id to the smbus list to
produce the setup of intertouch for the device.

Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Link: https://lore.kernel.org/r/20231114063607.71772-1-jose.pekkarinen@foxhound.fi
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index e43e93ac2798a..b6749af462620 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -183,6 +183,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN009b", /* T580 */
 	"LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */
 	"LEN040f", /* P1 Gen 3 */
+	"LEN0411", /* L14 Gen 1 */
 	"LEN200f", /* T450s */
 	"LEN2044", /* L470  */
 	"LEN2054", /* E480 */
-- 
2.43.0

[PATCH AUTOSEL 6.1 02/24] reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit b5ec294472794ed9ecba0cb4b8208372842e7e0d ]

'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:

  hi6220_reset.c:166:9: error: cast to smaller integer type 'enum hi6220_reset_ctrl_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810091300.70197-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/reset/hisilicon/hi6220_reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
index 5ca145b64e63d..30951914afac7 100644
--- a/drivers/reset/hisilicon/hi6220_reset.c
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -164,7 +164,7 @@ static int hi6220_reset_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	type = (enum hi6220_reset_ctrl_type)of_device_get_match_data(dev);
+	type = (uintptr_t)of_device_get_match_data(dev);
 
 	regmap = syscon_node_to_regmap(np);
 	if (IS_ERR(regmap)) {
-- 
2.43.0

[PATCH AUTOSEL 6.1 03/24] Input: atkbd - skip ATKBD_CMD_GETID in translated mode

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 936e4d49ecbc8c404790504386e1422b599dec39 ]

There have been multiple reports of keyboard issues on recent laptop models
which can be worked around by setting i8042.dumbkbd, with the downside
being this breaks the capslock LED.

It seems that these issues are caused by recent laptops getting confused by
ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for
this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode.

The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2
mice/touchpads and those are never used in translated mode.

Examples of laptop models which benefit from skipping ATKBD_CMD_GETID:

* "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx"
  models the kbd stops working for the first 2 - 5 minutes after boot
  (waiting for EC watchdog reset?)

* On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard

* At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see:
  https://github.com/yescallop/atkbd-nogetid

This has been tested on:

1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not
   in translated mode when no keyboard is plugged in and with a ps/2 kbd
   a "AT Translated Set 2 keyboard" /dev/input/event# node shows up

2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard)

Reported-by: Shang Ye <yesh25@mail2.sysu.edu.cn>
Closes: https://lore.kernel.org/linux-input/886D6167733841AE+20231017135318.11142-1-yesh25@mail2.sysu.edu.cn/
Closes: https://github.com/yescallop/atkbd-nogetid
Reported-by: gurevitch <mail@gurevit.ch>
Closes: https://lore.kernel.org/linux-input/2iAJTwqZV6lQs26cTb38RNYqxvsink6SRmrZ5h0cBUSuf9NT0tZTsf9fEAbbto2maavHJEOP8GA1evlKa6xjKOsaskDhtJWxjcnrgPigzVo=@gurevit.ch/
Reported-by: Egor Ignatov <egori@altlinux.org>
Closes: https://lore.kernel.org/all/20210609073333.8425-1-egori@altlinux.org/
Reported-by: Anton Zhilyaev <anton@cpp.in>
Closes: https://lore.kernel.org/linux-input/20210201160336.16008-1-anton@cpp.in/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2086156
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231115174625.7462-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/atkbd.c | 46 +++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 246958795f606..e1e4f1133296a 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -746,6 +746,44 @@ static void atkbd_deactivate(struct atkbd *atkbd)
 			ps2dev->serio->phys);
 }
 
+#ifdef CONFIG_X86
+static bool atkbd_is_portable_device(void)
+{
+	static const char * const chassis_types[] = {
+		"8",	/* Portable */
+		"9",	/* Laptop */
+		"10",	/* Notebook */
+		"14",	/* Sub-Notebook */
+		"31",	/* Convertible */
+		"32",	/* Detachable */
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(chassis_types); i++)
+		if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i]))
+			return true;
+
+	return false;
+}
+
+/*
+ * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops
+ * the controller is always in translated mode. In this mode mice/touchpads will
+ * not work. So in this case simply assume a keyboard is connected to avoid
+ * confusing some laptop keyboards.
+ *
+ * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is
+ * ok in translated mode, only atkbd_select_set() checks atkbd->id and in
+ * translated mode that is a no-op.
+ */
+static bool atkbd_skip_getid(struct atkbd *atkbd)
+{
+	return atkbd->translated && atkbd_is_portable_device();
+}
+#else
+static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; }
+#endif
+
 /*
  * atkbd_probe() probes for an AT keyboard on a serio port.
  */
@@ -775,12 +813,12 @@ static int atkbd_probe(struct atkbd *atkbd)
  */
 
 	param[0] = param[1] = 0xa5;	/* initialize with invalid values */
-	if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+	if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
 
 /*
- * If the get ID command failed, we check if we can at least set the LEDs on
- * the keyboard. This should work on every keyboard out there. It also turns
- * the LEDs off, which we want anyway.
+ * If the get ID command was skipped or failed, we check if we can at least set
+ * the LEDs on the keyboard. This should work on every keyboard out there.
+ * It also turns the LEDs off, which we want anyway.
  */
 		param[0] = 0;
 		if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
-- 
2.43.0

[PATCH AUTOSEL 6.1 04/24] Input: i8042 - add nomux quirk for Acer P459-G2-M

[Sasha Levin]

From: Esther Shimanovich <eshimanovich@chromium.org>

[ Upstream commit 335fe00319e030d481a54d5e0e68d50c5e672c0e ]

After the laptop lid is opened, and the device resumes from S3 deep
sleep, if the user presses a keyboard key while the screen is still black,
the mouse and keyboard become unusable.

Enabling this quirk prevents this behavior from occurring.

Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org>
Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3029631d9c11@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 9c39553d30fa2..b585b1dab870e 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -360,6 +360,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_DRITEK)
 	},
+	{
+		/* Acer TravelMate P459-G2-M */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate P459-G2-M"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
 	{
 		/* Amoi M636/A737 */
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.1 05/24] Input: amimouse - convert to platform remove callback returning void

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 42b8ff47720258d1f6a4412e780a480c139773a0 ]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231201133747.1099286-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/amimouse.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index a50e503548323..cda0c3ff5a288 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -125,16 +125,15 @@ static int __init amimouse_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __exit amimouse_remove(struct platform_device *pdev)
+static void __exit amimouse_remove(struct platform_device *pdev)
 {
 	struct input_dev *dev = platform_get_drvdata(pdev);
 
 	input_unregister_device(dev);
-	return 0;
 }
 
 static struct platform_driver amimouse_driver = {
-	.remove = __exit_p(amimouse_remove),
+	.remove_new = __exit_p(amimouse_remove),
 	.driver   = {
 		.name	= "amiga-mouse",
 	},
-- 
2.43.0

[PATCH AUTOSEL 6.1 06/24] s390/scm: fix virtual vs physical address confusion

[Sasha Levin]

From: Vineeth Vijayan <vneethv@linux.ibm.com>

[ Upstream commit b1a6a1a77f0666a5a6dc0893ab6ec8fcae46f24c ]

Fix virtual vs physical address confusion (which currently are the same).

Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/block/scm_blk.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c
index 0c1df1d5f1aca..a165b1a59fde5 100644
--- a/drivers/s390/block/scm_blk.c
+++ b/drivers/s390/block/scm_blk.c
@@ -17,6 +17,7 @@
 #include <linux/blk-mq.h>
 #include <linux/slab.h>
 #include <linux/list.h>
+#include <linux/io.h>
 #include <asm/eadm.h>
 #include "scm_blk.h"
 
@@ -130,7 +131,7 @@ static void scm_request_done(struct scm_request *scmrq)
 
 	for (i = 0; i < nr_requests_per_io && scmrq->request[i]; i++) {
 		msb = &scmrq->aob->msb[i];
-		aidaw = msb->data_addr;
+		aidaw = (u64)phys_to_virt(msb->data_addr);
 
 		if ((msb->flags & MSB_FLAG_IDA) && aidaw &&
 		    IS_ALIGNED(aidaw, PAGE_SIZE))
@@ -195,12 +196,12 @@ static int scm_request_prepare(struct scm_request *scmrq)
 	msb->scm_addr = scmdev->address + ((u64) blk_rq_pos(req) << 9);
 	msb->oc = (rq_data_dir(req) == READ) ? MSB_OC_READ : MSB_OC_WRITE;
 	msb->flags |= MSB_FLAG_IDA;
-	msb->data_addr = (u64) aidaw;
+	msb->data_addr = (u64)virt_to_phys(aidaw);
 
 	rq_for_each_segment(bv, req, iter) {
 		WARN_ON(bv.bv_offset);
 		msb->blk_count += bv.bv_len >> 12;
-		aidaw->data_addr = (u64) page_address(bv.bv_page);
+		aidaw->data_addr = virt_to_phys(page_address(bv.bv_page));
 		aidaw++;
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 6.1 07/24] ARC: fix spare error

[Sasha Levin]

From: Vineet Gupta <vgupta@kernel.org>

[ Upstream commit aca02d933f63ba8bc84258bf35f9ffaf6b664336 ]

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312082320.VDN5A9hb-lkp@intel.com/
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/kernel/signal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index 3c1590c27fae3..723abcb10c801 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -61,7 +61,7 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
-static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
@@ -74,12 +74,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
 #else
 	v2abi.r58 = v2abi.r59 = 0;
 #endif
-	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
 #endif
 	return err;
 }
 
-static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
 {
 	int err = 0;
 #ifndef CONFIG_ISA_ARCOMPACT
-- 
2.43.0

[PATCH AUTOSEL 6.1 08/24] wifi: iwlwifi: pcie: avoid a NULL pointer dereference

[Sasha Levin]

From: Avraham Stern <avraham.stern@intel.com>

[ Upstream commit ce038edfce43fb345f8dfdca0f7b17f535896701 ]

It possible that while the rx rb is being handled, the transport has
been stopped and re-started. In this case the tx queue pointer is not
yet initialized, which will lead to a NULL pointer dereference.
Fix it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.cd0898cafd89.I0b84daae753ba9612092bf383f5c6f761446e964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 90a46faaaffdf..260500427634c 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1381,7 +1381,7 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 		 * if it is true then one of the handlers took the page.
 		 */
 
-		if (reclaim) {
+		if (reclaim && txq) {
 			u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 			int index = SEQ_TO_INDEX(sequence);
 			int cmd_index = iwl_txq_get_cmd_index(txq, index);
-- 
2.43.0

[PATCH AUTOSEL 6.1 09/24] Input: xpad - add Razer Wolverine V2 support

[Sasha Levin]

From: Luca Weiss <luca@z3ntu.xyz>

[ Upstream commit c3d1610345b79cbe29ef6ca04a4780eff0d360c7 ]

Add the VID and PID of Razer Wolverine V2 to xpad_device.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 8404286302b0c..e8011d70d0799 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -286,6 +286,7 @@ static const struct xpad_device {
 	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
+	{ 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
 	{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
 	{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
 	{ 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 },
-- 
2.43.0

[PATCH AUTOSEL 6.1 10/24] kselftest: alsa: fixed a print formatting warning

[Sasha Levin]

From: Ghanshyam Agrawal <ghanshyam1898@gmail.com>

[ Upstream commit 13d605e32e4cfdedcecdf3d98d21710ffe887708 ]

A statement used %d print formatter where %s should have
been used. The same has been fixed in this commit.

Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Link: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/alsa/mixer-test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c
index a38b89c280306..37da902545a41 100644
--- a/tools/testing/selftests/alsa/mixer-test.c
+++ b/tools/testing/selftests/alsa/mixer-test.c
@@ -177,7 +177,7 @@ static void find_controls(void)
 			err = snd_ctl_elem_info(card_data->handle,
 						ctl_data->info);
 			if (err < 0) {
-				ksft_print_msg("%s getting info for %d\n",
+				ksft_print_msg("%s getting info for %s\n",
 					       snd_strerror(err),
 					       ctl_data->name);
 			}
-- 
2.43.0

[PATCH AUTOSEL 6.1 11/24] HID: nintendo: fix initializer element is not constant error

[Sasha Levin]

From: Ryan McClelland <rymcclel@gmail.com>

[ Upstream commit 0b7dd38c1c520b650a889a81919838671b689eb9 ]

With gcc-7 builds, an error happens with the controller button values being
defined as const. Change to a define.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312141227.C2h1IzfI-lkp@intel.com/

Signed-off-by: Ryan McClelland <rymcclel@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nintendo.c | 44 +++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 8a8a3dd8af0c1..907c9b574e3b3 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -325,28 +325,28 @@ struct joycon_imu_cal {
  * All the controller's button values are stored in a u32.
  * They can be accessed with bitwise ANDs.
  */
-static const u32 JC_BTN_Y	= BIT(0);
-static const u32 JC_BTN_X	= BIT(1);
-static const u32 JC_BTN_B	= BIT(2);
-static const u32 JC_BTN_A	= BIT(3);
-static const u32 JC_BTN_SR_R	= BIT(4);
-static const u32 JC_BTN_SL_R	= BIT(5);
-static const u32 JC_BTN_R	= BIT(6);
-static const u32 JC_BTN_ZR	= BIT(7);
-static const u32 JC_BTN_MINUS	= BIT(8);
-static const u32 JC_BTN_PLUS	= BIT(9);
-static const u32 JC_BTN_RSTICK	= BIT(10);
-static const u32 JC_BTN_LSTICK	= BIT(11);
-static const u32 JC_BTN_HOME	= BIT(12);
-static const u32 JC_BTN_CAP	= BIT(13); /* capture button */
-static const u32 JC_BTN_DOWN	= BIT(16);
-static const u32 JC_BTN_UP	= BIT(17);
-static const u32 JC_BTN_RIGHT	= BIT(18);
-static const u32 JC_BTN_LEFT	= BIT(19);
-static const u32 JC_BTN_SR_L	= BIT(20);
-static const u32 JC_BTN_SL_L	= BIT(21);
-static const u32 JC_BTN_L	= BIT(22);
-static const u32 JC_BTN_ZL	= BIT(23);
+#define JC_BTN_Y	 BIT(0)
+#define JC_BTN_X	 BIT(1)
+#define JC_BTN_B	 BIT(2)
+#define JC_BTN_A	 BIT(3)
+#define JC_BTN_SR_R	 BIT(4)
+#define JC_BTN_SL_R	 BIT(5)
+#define JC_BTN_R	 BIT(6)
+#define JC_BTN_ZR	 BIT(7)
+#define JC_BTN_MINUS	 BIT(8)
+#define JC_BTN_PLUS	 BIT(9)
+#define JC_BTN_RSTICK	 BIT(10)
+#define JC_BTN_LSTICK	 BIT(11)
+#define JC_BTN_HOME	 BIT(12)
+#define JC_BTN_CAP	 BIT(13) /* capture button */
+#define JC_BTN_DOWN	 BIT(16)
+#define JC_BTN_UP	 BIT(17)
+#define JC_BTN_RIGHT	 BIT(18)
+#define JC_BTN_LEFT	 BIT(19)
+#define JC_BTN_SR_L	 BIT(20)
+#define JC_BTN_SL_L	 BIT(21)
+#define JC_BTN_L	 BIT(22)
+#define JC_BTN_ZL	 BIT(23)
 
 enum joycon_msg_type {
 	JOYCON_MSG_TYPE_NONE,
-- 
2.43.0

[PATCH AUTOSEL 6.1 12/24] platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems

[Sasha Levin]

From: Vishnu Sankar <vishnuocv@gmail.com>

[ Upstream commit 66e92e23a72761f5b53f970aeb1badc5fd92fc74 ]

Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.

Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 98 ++++++++++++++++++++++++----
 1 file changed, 85 insertions(+), 13 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 05a55bc31c796..6edd2e294750e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8149,8 +8149,19 @@ static struct ibm_struct volume_driver_data = {
  * 	TPACPI_FAN_WR_TPEC is also available and should be used to
  * 	command the fan.  The X31/X40/X41 seems to have 8 fan levels,
  * 	but the ACPI tables just mention level 7.
+ *
+ * TPACPI_FAN_RD_TPEC_NS:
+ *	This mode is used for a few ThinkPads (L13 Yoga Gen2, X13 Yoga Gen2 etc.)
+ *	that are using non-standard EC locations for reporting fan speeds.
+ *	Currently these platforms only provide fan rpm reporting.
+ *
  */
 
+#define FAN_RPM_CAL_CONST 491520	/* FAN RPM calculation offset for some non-standard ECFW */
+
+#define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
+#define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
+
 enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
 	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
@@ -8158,6 +8169,11 @@ enum {					/* Fan control constants */
 	fan_select_offset = 0x31,	/* EC register 0x31 (Firmware 7M)
 					   bit 0 selects which fan is active */
 
+	fan_status_offset_ns = 0x93,	/* Special status/control offset for non-standard EC Fan1 */
+	fan2_status_offset_ns = 0x96,	/* Special status/control offset for non-standard EC Fan2 */
+	fan_rpm_status_ns = 0x95,	/* Special offset for Fan1 RPM status for non-standard EC */
+	fan2_rpm_status_ns = 0x98,	/* Special offset for Fan2 RPM status for non-standard EC */
+
 	TP_EC_FAN_FULLSPEED = 0x40,	/* EC fan mode: full speed */
 	TP_EC_FAN_AUTO	    = 0x80,	/* EC fan mode: auto fan control */
 
@@ -8168,6 +8184,7 @@ enum fan_status_access_mode {
 	TPACPI_FAN_NONE = 0,		/* No fan status or control */
 	TPACPI_FAN_RD_ACPI_GFAN,	/* Use ACPI GFAN */
 	TPACPI_FAN_RD_TPEC,		/* Use ACPI EC regs 0x2f, 0x84-0x85 */
+	TPACPI_FAN_RD_TPEC_NS,		/* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */
 };
 
 enum fan_control_access_mode {
@@ -8195,6 +8212,8 @@ static u8 fan_control_desired_level;
 static u8 fan_control_resume_level;
 static int fan_watchdog_maxinterval;
 
+static bool fan_with_ns_addr;
+
 static struct mutex fan_mutex;
 
 static void fan_watchdog_fire(struct work_struct *ignored);
@@ -8325,6 +8344,15 @@ static int fan_get_status(u8 *status)
 		}
 
 		break;
+	case TPACPI_FAN_RD_TPEC_NS:
+		/* Default mode is AUTO which means controlled by EC */
+		if (!acpi_ec_read(fan_status_offset_ns, &s))
+			return -EIO;
+
+		if (status)
+			*status = s;
+
+		break;
 
 	default:
 		return -ENXIO;
@@ -8341,7 +8369,8 @@ static int fan_get_status_safe(u8 *status)
 	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 	rc = fan_get_status(&s);
-	if (!rc)
+	/* NS EC doesn't have register with level settings */
+	if (!rc && !fan_with_ns_addr)
 		fan_update_desired_level(s);
 	mutex_unlock(&fan_mutex);
 
@@ -8368,7 +8397,13 @@ static int fan_get_speed(unsigned int *speed)
 
 		if (likely(speed))
 			*speed = (hi << 8) | lo;
+		break;
+	case TPACPI_FAN_RD_TPEC_NS:
+		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
+			return -EIO;
 
+		if (speed)
+			*speed = lo ? FAN_RPM_CAL_CONST / lo : 0;
 		break;
 
 	default:
@@ -8380,7 +8415,7 @@ static int fan_get_speed(unsigned int *speed)
 
 static int fan2_get_speed(unsigned int *speed)
 {
-	u8 hi, lo;
+	u8 hi, lo, status;
 	bool rc;
 
 	switch (fan_status_access_mode) {
@@ -8396,7 +8431,21 @@ static int fan2_get_speed(unsigned int *speed)
 
 		if (likely(speed))
 			*speed = (hi << 8) | lo;
+		break;
 
+	case TPACPI_FAN_RD_TPEC_NS:
+		rc = !acpi_ec_read(fan2_status_offset_ns, &status);
+		if (rc)
+			return -EIO;
+		if (!(status & FAN_NS_CTRL_STATUS)) {
+			pr_info("secondary fan control not supported\n");
+			return -EIO;
+		}
+		rc = !acpi_ec_read(fan2_rpm_status_ns, &lo);
+		if (rc)
+			return -EIO;
+		if (speed)
+			*speed = lo ? FAN_RPM_CAL_CONST / lo : 0;
 		break;
 
 	default:
@@ -8899,6 +8948,7 @@ static const struct attribute_group fan_driver_attr_group = {
 #define TPACPI_FAN_2FAN		0x0002		/* EC 0x31 bit 0 selects fan2 */
 #define TPACPI_FAN_2CTL		0x0004		/* selects fan2 control */
 #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
+#define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
 
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
@@ -8917,6 +8967,8 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (2nd gen) */
 	TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL),	/* P15 (1st gen) / P15v (1st gen) */
 	TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL),  /* T15g (2nd gen) */
+	TPACPI_Q_LNV3('R', '1', 'F', TPACPI_FAN_NS),	/* L13 Yoga Gen 2 */
+	TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS),	/* X13 Yoga Gen 2*/
 	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
 };
 
@@ -8951,18 +9003,27 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 		return -ENODEV;
 	}
 
+	if (quirks & TPACPI_FAN_NS) {
+		pr_info("ECFW with non-standard fan reg control found\n");
+		fan_with_ns_addr = 1;
+		/* Fan ctrl support from host is undefined for now */
+		tp_features.fan_ctrl_status_undef = 1;
+	}
+
 	if (gfan_handle) {
 		/* 570, 600e/x, 770e, 770x */
 		fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
 	} else {
 		/* all other ThinkPads: note that even old-style
 		 * ThinkPad ECs supports the fan control register */
-		if (likely(acpi_ec_read(fan_status_offset,
-					&fan_control_initial_status))) {
+		if (fan_with_ns_addr ||
+		    likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) {
 			int res;
 			unsigned int speed;
 
-			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
+			fan_status_access_mode = fan_with_ns_addr ?
+				TPACPI_FAN_RD_TPEC_NS : TPACPI_FAN_RD_TPEC;
+
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
 			/* Try and probe the 2nd fan */
@@ -8971,7 +9032,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 			if (res >= 0 && speed != FAN_NOT_PRESENT) {
 				/* It responded - so let's assume it's there */
 				tp_features.second_fan = 1;
-				tp_features.second_fan_ctl = 1;
+				/* fan control not currently available for ns ECFW */
+				tp_features.second_fan_ctl = !fan_with_ns_addr;
 				pr_info("secondary fan control detected & enabled\n");
 			} else {
 				/* Fan not auto-detected */
@@ -9146,6 +9208,7 @@ static int fan_read(struct seq_file *m)
 			       str_enabled_disabled(status), status);
 		break;
 
+	case TPACPI_FAN_RD_TPEC_NS:
 	case TPACPI_FAN_RD_TPEC:
 		/* all except 570, 600e/x, 770e, 770x */
 		rc = fan_get_status_safe(&status);
@@ -9160,13 +9223,22 @@ static int fan_read(struct seq_file *m)
 
 		seq_printf(m, "speed:\t\t%d\n", speed);
 
-		if (status & TP_EC_FAN_FULLSPEED)
-			/* Disengaged mode takes precedence */
-			seq_printf(m, "level:\t\tdisengaged\n");
-		else if (status & TP_EC_FAN_AUTO)
-			seq_printf(m, "level:\t\tauto\n");
-		else
-			seq_printf(m, "level:\t\t%d\n", status);
+		if (fan_status_access_mode == TPACPI_FAN_RD_TPEC_NS) {
+			/*
+			 * No full speed bit in NS EC
+			 * EC Auto mode is set by default.
+			 * No other levels settings available
+			 */
+			seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto");
+		} else {
+			if (status & TP_EC_FAN_FULLSPEED)
+				/* Disengaged mode takes precedence */
+				seq_printf(m, "level:\t\tdisengaged\n");
+			else if (status & TP_EC_FAN_AUTO)
+				seq_printf(m, "level:\t\tauto\n");
+			else
+				seq_printf(m, "level:\t\t%d\n", status);
+		}
 		break;
 
 	case TPACPI_FAN_NONE:
-- 
2.43.0

Re: [PATCH AUTOSEL 6.1 12/24] platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 9515 bytes --]

Hi!

> [ Upstream commit 66e92e23a72761f5b53f970aeb1badc5fd92fc74 ]
> 
> Some ThinkPad systems ECFW use non-standard addresses for fan control
> and reporting. This patch adds support for such ECFW so that it can report
> the correct fan values.
> Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.

This is just a new feature, and is > 200 lines. We should not have
this in stable.

BR,
								Pavel





> Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
> Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/platform/x86/thinkpad_acpi.c | 98 ++++++++++++++++++++++++----
>  1 file changed, 85 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 05a55bc31c796..6edd2e294750e 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -8149,8 +8149,19 @@ static struct ibm_struct volume_driver_data = {
>   * 	TPACPI_FAN_WR_TPEC is also available and should be used to
>   * 	command the fan.  The X31/X40/X41 seems to have 8 fan levels,
>   * 	but the ACPI tables just mention level 7.
> + *
> + * TPACPI_FAN_RD_TPEC_NS:
> + *	This mode is used for a few ThinkPads (L13 Yoga Gen2, X13 Yoga Gen2 etc.)
> + *	that are using non-standard EC locations for reporting fan speeds.
> + *	Currently these platforms only provide fan rpm reporting.
> + *
>   */
>  
> +#define FAN_RPM_CAL_CONST 491520	/* FAN RPM calculation offset for some non-standard ECFW */
> +
> +#define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
> +#define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
> +
>  enum {					/* Fan control constants */
>  	fan_status_offset = 0x2f,	/* EC register 0x2f */
>  	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
> @@ -8158,6 +8169,11 @@ enum {					/* Fan control constants */
>  	fan_select_offset = 0x31,	/* EC register 0x31 (Firmware 7M)
>  					   bit 0 selects which fan is active */
>  
> +	fan_status_offset_ns = 0x93,	/* Special status/control offset for non-standard EC Fan1 */
> +	fan2_status_offset_ns = 0x96,	/* Special status/control offset for non-standard EC Fan2 */
> +	fan_rpm_status_ns = 0x95,	/* Special offset for Fan1 RPM status for non-standard EC */
> +	fan2_rpm_status_ns = 0x98,	/* Special offset for Fan2 RPM status for non-standard EC */
> +
>  	TP_EC_FAN_FULLSPEED = 0x40,	/* EC fan mode: full speed */
>  	TP_EC_FAN_AUTO	    = 0x80,	/* EC fan mode: auto fan control */
>  
> @@ -8168,6 +8184,7 @@ enum fan_status_access_mode {
>  	TPACPI_FAN_NONE = 0,		/* No fan status or control */
>  	TPACPI_FAN_RD_ACPI_GFAN,	/* Use ACPI GFAN */
>  	TPACPI_FAN_RD_TPEC,		/* Use ACPI EC regs 0x2f, 0x84-0x85 */
> +	TPACPI_FAN_RD_TPEC_NS,		/* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */
>  };
>  
>  enum fan_control_access_mode {
> @@ -8195,6 +8212,8 @@ static u8 fan_control_desired_level;
>  static u8 fan_control_resume_level;
>  static int fan_watchdog_maxinterval;
>  
> +static bool fan_with_ns_addr;
> +
>  static struct mutex fan_mutex;
>  
>  static void fan_watchdog_fire(struct work_struct *ignored);
> @@ -8325,6 +8344,15 @@ static int fan_get_status(u8 *status)
>  		}
>  
>  		break;
> +	case TPACPI_FAN_RD_TPEC_NS:
> +		/* Default mode is AUTO which means controlled by EC */
> +		if (!acpi_ec_read(fan_status_offset_ns, &s))
> +			return -EIO;
> +
> +		if (status)
> +			*status = s;
> +
> +		break;
>  
>  	default:
>  		return -ENXIO;
> @@ -8341,7 +8369,8 @@ static int fan_get_status_safe(u8 *status)
>  	if (mutex_lock_killable(&fan_mutex))
>  		return -ERESTARTSYS;
>  	rc = fan_get_status(&s);
> -	if (!rc)
> +	/* NS EC doesn't have register with level settings */
> +	if (!rc && !fan_with_ns_addr)
>  		fan_update_desired_level(s);
>  	mutex_unlock(&fan_mutex);
>  
> @@ -8368,7 +8397,13 @@ static int fan_get_speed(unsigned int *speed)
>  
>  		if (likely(speed))
>  			*speed = (hi << 8) | lo;
> +		break;
> +	case TPACPI_FAN_RD_TPEC_NS:
> +		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
> +			return -EIO;
>  
> +		if (speed)
> +			*speed = lo ? FAN_RPM_CAL_CONST / lo : 0;
>  		break;
>  
>  	default:
> @@ -8380,7 +8415,7 @@ static int fan_get_speed(unsigned int *speed)
>  
>  static int fan2_get_speed(unsigned int *speed)
>  {
> -	u8 hi, lo;
> +	u8 hi, lo, status;
>  	bool rc;
>  
>  	switch (fan_status_access_mode) {
> @@ -8396,7 +8431,21 @@ static int fan2_get_speed(unsigned int *speed)
>  
>  		if (likely(speed))
>  			*speed = (hi << 8) | lo;
> +		break;
>  
> +	case TPACPI_FAN_RD_TPEC_NS:
> +		rc = !acpi_ec_read(fan2_status_offset_ns, &status);
> +		if (rc)
> +			return -EIO;
> +		if (!(status & FAN_NS_CTRL_STATUS)) {
> +			pr_info("secondary fan control not supported\n");
> +			return -EIO;
> +		}
> +		rc = !acpi_ec_read(fan2_rpm_status_ns, &lo);
> +		if (rc)
> +			return -EIO;
> +		if (speed)
> +			*speed = lo ? FAN_RPM_CAL_CONST / lo : 0;
>  		break;
>  
>  	default:
> @@ -8899,6 +8948,7 @@ static const struct attribute_group fan_driver_attr_group = {
>  #define TPACPI_FAN_2FAN		0x0002		/* EC 0x31 bit 0 selects fan2 */
>  #define TPACPI_FAN_2CTL		0x0004		/* selects fan2 control */
>  #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
> +#define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
>  
>  static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
>  	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
> @@ -8917,6 +8967,8 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
>  	TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (2nd gen) */
>  	TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL),	/* P15 (1st gen) / P15v (1st gen) */
>  	TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL),  /* T15g (2nd gen) */
> +	TPACPI_Q_LNV3('R', '1', 'F', TPACPI_FAN_NS),	/* L13 Yoga Gen 2 */
> +	TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS),	/* X13 Yoga Gen 2*/
>  	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
>  };
>  
> @@ -8951,18 +9003,27 @@ static int __init fan_init(struct ibm_init_struct *iibm)
>  		return -ENODEV;
>  	}
>  
> +	if (quirks & TPACPI_FAN_NS) {
> +		pr_info("ECFW with non-standard fan reg control found\n");
> +		fan_with_ns_addr = 1;
> +		/* Fan ctrl support from host is undefined for now */
> +		tp_features.fan_ctrl_status_undef = 1;
> +	}
> +
>  	if (gfan_handle) {
>  		/* 570, 600e/x, 770e, 770x */
>  		fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
>  	} else {
>  		/* all other ThinkPads: note that even old-style
>  		 * ThinkPad ECs supports the fan control register */
> -		if (likely(acpi_ec_read(fan_status_offset,
> -					&fan_control_initial_status))) {
> +		if (fan_with_ns_addr ||
> +		    likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) {
>  			int res;
>  			unsigned int speed;
>  
> -			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
> +			fan_status_access_mode = fan_with_ns_addr ?
> +				TPACPI_FAN_RD_TPEC_NS : TPACPI_FAN_RD_TPEC;
> +
>  			if (quirks & TPACPI_FAN_Q1)
>  				fan_quirk1_setup();
>  			/* Try and probe the 2nd fan */
> @@ -8971,7 +9032,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
>  			if (res >= 0 && speed != FAN_NOT_PRESENT) {
>  				/* It responded - so let's assume it's there */
>  				tp_features.second_fan = 1;
> -				tp_features.second_fan_ctl = 1;
> +				/* fan control not currently available for ns ECFW */
> +				tp_features.second_fan_ctl = !fan_with_ns_addr;
>  				pr_info("secondary fan control detected & enabled\n");
>  			} else {
>  				/* Fan not auto-detected */
> @@ -9146,6 +9208,7 @@ static int fan_read(struct seq_file *m)
>  			       str_enabled_disabled(status), status);
>  		break;
>  
> +	case TPACPI_FAN_RD_TPEC_NS:
>  	case TPACPI_FAN_RD_TPEC:
>  		/* all except 570, 600e/x, 770e, 770x */
>  		rc = fan_get_status_safe(&status);
> @@ -9160,13 +9223,22 @@ static int fan_read(struct seq_file *m)
>  
>  		seq_printf(m, "speed:\t\t%d\n", speed);
>  
> -		if (status & TP_EC_FAN_FULLSPEED)
> -			/* Disengaged mode takes precedence */
> -			seq_printf(m, "level:\t\tdisengaged\n");
> -		else if (status & TP_EC_FAN_AUTO)
> -			seq_printf(m, "level:\t\tauto\n");
> -		else
> -			seq_printf(m, "level:\t\t%d\n", status);
> +		if (fan_status_access_mode == TPACPI_FAN_RD_TPEC_NS) {
> +			/*
> +			 * No full speed bit in NS EC
> +			 * EC Auto mode is set by default.
> +			 * No other levels settings available
> +			 */
> +			seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto");
> +		} else {
> +			if (status & TP_EC_FAN_FULLSPEED)
> +				/* Disengaged mode takes precedence */
> +				seq_printf(m, "level:\t\tdisengaged\n");
> +			else if (status & TP_EC_FAN_AUTO)
> +				seq_printf(m, "level:\t\tauto\n");
> +			else
> +				seq_printf(m, "level:\t\t%d\n", status);
> +		}
>  		break;
>  
>  	case TPACPI_FAN_NONE:

-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[PATCH AUTOSEL 6.1 13/24] ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 99c7bb44f5749373bc01b73af02b50b69bcbf43d ]

Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 783c201259921..b63c16c67898f 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -884,6 +884,18 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{
+		/* Medion Lifetab S10346 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are much too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Mele PCG03 Mini PC */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Mini PC"),
-- 
2.43.0

[PATCH AUTOSEL 6.1 14/24] ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b1b6131bca35a55a69fadc39d51577968fa2ee97 ]

Some BYTCR x86 tablets with a rt5640 codec have the left and right channels
of their speakers swapped.

Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets
cfg-spk:swapped in the components string to let userspace know
about the swapping so that the UCM profile can configure the mixer
to correct this.

Enable this new quirk on the Medion Lifetab S10346 which has its
speakers swapped.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index b63c16c67898f..797d0a48d6066 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -83,6 +83,7 @@ enum {
 #define BYT_RT5640_HSMIC2_ON_IN1	BIT(27)
 #define BYT_RT5640_JD_HP_ELITEP_1000G2	BIT(28)
 #define BYT_RT5640_USE_AMCR0F28		BIT(29)
+#define BYT_RT5640_SWAPPED_SPEAKERS	BIT(30)
 
 #define BYTCR_INPUT_DEFAULTS				\
 	(BYT_RT5640_IN3_MAP |				\
@@ -157,6 +158,8 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk MONO_SPEAKER enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS)
 		dev_info(dev, "quirk NO_SPEAKERS enabled\n");
+	if (byt_rt5640_quirk & BYT_RT5640_SWAPPED_SPEAKERS)
+		dev_info(dev, "quirk SWAPPED_SPEAKERS enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_LINEOUT)
 		dev_info(dev, "quirk LINEOUT enabled\n");
 	if (byt_rt5640_quirk & BYT_RT5640_LINEOUT_AS_HP2)
@@ -893,6 +896,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 			DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"),
 		},
 		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_SWAPPED_SPEAKERS |
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
@@ -1621,11 +1625,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	const char *platform_name;
 	struct acpi_device *adev;
 	struct device *codec_dev;
+	const char *cfg_spk;
 	bool sof_parent;
 	int ret_val = 0;
 	int dai_index = 0;
-	int i, cfg_spk;
-	int aif;
+	int i, aif;
 
 	is_bytcr = false;
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -1785,13 +1789,16 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 	}
 
 	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
-		cfg_spk = 0;
+		cfg_spk = "0";
 		spk_type = "none";
 	} else if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) {
-		cfg_spk = 1;
+		cfg_spk = "1";
 		spk_type = "mono";
+	} else if (byt_rt5640_quirk & BYT_RT5640_SWAPPED_SPEAKERS) {
+		cfg_spk = "swapped";
+		spk_type = "swapped";
 	} else {
-		cfg_spk = 2;
+		cfg_spk = "2";
 		spk_type = "stereo";
 	}
 
@@ -1806,7 +1813,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		headset2_string = " cfg-hs2:in1";
 
 	snprintf(byt_rt5640_components, sizeof(byt_rt5640_components),
-		 "cfg-spk:%d cfg-mic:%s aif:%d%s%s", cfg_spk,
+		 "cfg-spk:%s cfg-mic:%s aif:%d%s%s", cfg_spk,
 		 map_name[BYT_RT5640_MAP(byt_rt5640_quirk)], aif,
 		 lineout_string, headset2_string);
 	byt_rt5640_card.components = byt_rt5640_components;
-- 
2.43.0

[PATCH AUTOSEL 6.1 15/24] ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models

[Sasha Levin]

From: Stefan Binding <sbinding@opensource.cirrus.com>

[ Upstream commit 51d976079976c800ef19ed1b542602fcf63f0edb ]

These models use 2xCS35L41amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231218151221.388745-6-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index a7c361e0daebe..9342f89d4003a 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9766,17 +9766,20 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1d1f, "ASUS ROG Strix G17 2023 (G713PV)", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
+	SND_PCI_QUIRK(0x1043, 0x1da2, "ASUS UP6502ZA/ZD", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1e02, "ASUS UX3402ZA", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS UX3402VA", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1f62, "ASUS UX7602ZM", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502),
-	SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x1043, 0x1e12, "ASUS UM6702RA/RC", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e5e, "ASUS ROG Strix G513", ALC294_FIXUP_ASUS_G513_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
+	SND_PCI_QUIRK(0x1043, 0x1ee2, "ASUS UM3402", ALC287_FIXUP_CS35L41_I2C_2),
 	SND_PCI_QUIRK(0x1043, 0x1c52, "ASUS Zephyrus G15 2022", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f12, "ASUS UM5302", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x1043, 0x1f62, "ASUS UX7602ZM", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1f92, "ASUS ROG Flow X16", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),
 	SND_PCI_QUIRK(0x1043, 0x3a20, "ASUS G614JZR", ALC245_FIXUP_CS35L41_SPI_2),
-- 
2.43.0

[PATCH AUTOSEL 6.1 16/24] dm audit: fix Kconfig so DM_AUDIT depends on BLK_DEV_DM

[Sasha Levin]

From: Mike Snitzer <snitzer@kernel.org>

[ Upstream commit 6849302fdff126997765d16df355b73231f130d4 ]

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 662d219c39bf4..db0e97020256e 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -650,6 +650,7 @@ config DM_ZONED
 
 config DM_AUDIT
 	bool "DM audit events"
+	depends on BLK_DEV_DM
 	depends on AUDIT
 	help
 	  Generate audit events for device-mapper.
-- 
2.43.0

[PATCH AUTOSEL 6.1 17/24] HID: nintendo: Prevent divide-by-zero on code

[Sasha Levin]

From: "Guilherme G. Piccoli" <gpiccoli@igalia.com>

[ Upstream commit 6eb04ca8c52e3f8c8ea7102ade81d642eee87f4a ]

It was reported [0] that adding a generic joycon to the system caused
a kernel crash on Steam Deck, with the below panic spew:

divide error: 0000 [#1] PREEMPT SMP NOPTI
[...]
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023
RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
[...]
Call Trace:
 [...]
 ? exc_divide_error+0x38/0x50
 ? nintendo_hid_event+0x340/0xcc1 [hid_nintendo]
 ? asm_exc_divide_error+0x1a/0x20
 ? nintendo_hid_event+0x307/0xcc1 [hid_nintendo]
 hid_input_report+0x143/0x160
 hidp_session_run+0x1ce/0x700 [hidp]

Since it's a divide-by-0 error, by tracking the code for potential
denominator issues, we've spotted 2 places in which this could happen;
so let's guard against the possibility and log in the kernel if the
condition happens. This is specially useful since some data that
fills some denominators are read from the joycon HW in some cases,
increasing the potential for flaws.

[0] https://github.com/ValveSoftware/SteamOS/issues/1070

Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Tested-by: Sam Lantinga <slouken@libsdl.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nintendo.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 907c9b574e3b3..df07e3ae0ffb4 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -859,14 +859,27 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
  */
 static void joycon_calc_imu_cal_divisors(struct joycon_ctlr *ctlr)
 {
-	int i;
+	int i, divz = 0;
 
 	for (i = 0; i < 3; i++) {
 		ctlr->imu_cal_accel_divisor[i] = ctlr->accel_cal.scale[i] -
 						ctlr->accel_cal.offset[i];
 		ctlr->imu_cal_gyro_divisor[i] = ctlr->gyro_cal.scale[i] -
 						ctlr->gyro_cal.offset[i];
+
+		if (ctlr->imu_cal_accel_divisor[i] == 0) {
+			ctlr->imu_cal_accel_divisor[i] = 1;
+			divz++;
+		}
+
+		if (ctlr->imu_cal_gyro_divisor[i] == 0) {
+			ctlr->imu_cal_gyro_divisor[i] = 1;
+			divz++;
+		}
 	}
+
+	if (divz)
+		hid_warn(ctlr->hdev, "inaccurate IMU divisors (%d)\n", divz);
 }
 
 static const s16 DFLT_ACCEL_OFFSET /*= 0*/;
@@ -1095,16 +1108,16 @@ static void joycon_parse_imu_report(struct joycon_ctlr *ctlr,
 		    JC_IMU_SAMPLES_PER_DELTA_AVG) {
 			ctlr->imu_avg_delta_ms = ctlr->imu_delta_samples_sum /
 						 ctlr->imu_delta_samples_count;
-			/* don't ever want divide by zero shenanigans */
-			if (ctlr->imu_avg_delta_ms == 0) {
-				ctlr->imu_avg_delta_ms = 1;
-				hid_warn(ctlr->hdev,
-					 "calculated avg imu delta of 0\n");
-			}
 			ctlr->imu_delta_samples_count = 0;
 			ctlr->imu_delta_samples_sum = 0;
 		}
 
+		/* don't ever want divide by zero shenanigans */
+		if (ctlr->imu_avg_delta_ms == 0) {
+			ctlr->imu_avg_delta_ms = 1;
+			hid_warn(ctlr->hdev, "calculated avg imu delta of 0\n");
+		}
+
 		/* useful for debugging IMU sample rate */
 		hid_dbg(ctlr->hdev,
 			"imu_report: ms=%u last_ms=%u delta=%u avg_delta=%u\n",
-- 
2.43.0

[PATCH AUTOSEL 6.1 18/24] smb: client: fix potential OOB in smb2_dump_detail()

[Sasha Levin]

From: Paulo Alcantara <pc@manguebit.com>

[ Upstream commit 567320c46a60a3c39b69aa1df802d753817a3f86 ]

Validate SMB message with ->check_message() before calling
->calc_smb_size().

This fixes CVE-2023-6610.

Reported-by: j51569436@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218219
Cc; stable@vger.kernel.org
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/smb2misc.c | 30 +++++++++++++++---------------
 fs/smb/client/smb2ops.c  |  6 ++++--
 2 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/fs/smb/client/smb2misc.c b/fs/smb/client/smb2misc.c
index 88942b1fb4318..08ad74f51964f 100644
--- a/fs/smb/client/smb2misc.c
+++ b/fs/smb/client/smb2misc.c
@@ -173,6 +173,21 @@ smb2_check_message(char *buf, unsigned int len, struct TCP_Server_Info *server)
 	}
 
 	mid = le64_to_cpu(shdr->MessageId);
+	if (check_smb2_hdr(shdr, mid))
+		return 1;
+
+	if (shdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) {
+		cifs_dbg(VFS, "Invalid structure size %u\n",
+			 le16_to_cpu(shdr->StructureSize));
+		return 1;
+	}
+
+	command = le16_to_cpu(shdr->Command);
+	if (command >= NUMBER_OF_SMB2_COMMANDS) {
+		cifs_dbg(VFS, "Invalid SMB2 command %d\n", command);
+		return 1;
+	}
+
 	if (len < pdu_size) {
 		if ((len >= hdr_size)
 		    && (shdr->Status != 0)) {
@@ -193,21 +208,6 @@ smb2_check_message(char *buf, unsigned int len, struct TCP_Server_Info *server)
 		return 1;
 	}
 
-	if (check_smb2_hdr(shdr, mid))
-		return 1;
-
-	if (shdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) {
-		cifs_dbg(VFS, "Invalid structure size %u\n",
-			 le16_to_cpu(shdr->StructureSize));
-		return 1;
-	}
-
-	command = le16_to_cpu(shdr->Command);
-	if (command >= NUMBER_OF_SMB2_COMMANDS) {
-		cifs_dbg(VFS, "Invalid SMB2 command %d\n", command);
-		return 1;
-	}
-
 	if (smb2_rsp_struct_sizes[command] != pdu->StructureSize2) {
 		if (command != SMB2_OPLOCK_BREAK_HE && (shdr->Status == 0 ||
 		    pdu->StructureSize2 != SMB2_ERROR_STRUCTURE_SIZE2_LE)) {
diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c
index 1b3489a2f0db7..a9f84664a7a83 100644
--- a/fs/smb/client/smb2ops.c
+++ b/fs/smb/client/smb2ops.c
@@ -398,8 +398,10 @@ smb2_dump_detail(void *buf, struct TCP_Server_Info *server)
 	cifs_server_dbg(VFS, "Cmd: %d Err: 0x%x Flags: 0x%x Mid: %llu Pid: %d\n",
 		 shdr->Command, shdr->Status, shdr->Flags, shdr->MessageId,
 		 shdr->Id.SyncId.ProcessId);
-	cifs_server_dbg(VFS, "smb buf %p len %u\n", buf,
-		 server->ops->calc_smb_size(buf));
+	if (!server->ops->check_message(buf, server->total_read, server)) {
+		cifs_server_dbg(VFS, "smb buf %p len %u\n", buf,
+				server->ops->calc_smb_size(buf));
+	}
 #endif
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.1 19/24] i2c: rk3x: fix potential spinlock recursion on poll

[Sasha Levin]

From: Jensen Huang <jensenhuang@friendlyarm.com>

[ Upstream commit 19cde9c92b8d3b7ee555d0da3bcb0232d3a784f4 ]

Possible deadlock scenario (on reboot):
rk3x_i2c_xfer_common(polling)
    -> rk3x_i2c_wait_xfer_poll()
        -> rk3x_i2c_irq(0, i2c);
            --> spin_lock(&i2c->lock);
            ...
        <rk3x i2c interrupt>
        -> rk3x_i2c_irq(0, i2c);
            --> spin_lock(&i2c->lock); (deadlock here)

Store the IRQ number and disable/enable it around the polling transfer.
This patch has been tested on NanoPC-T4.

Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-rk3x.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index b31cf4f18f854..6aa4f1f062401 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -178,6 +178,7 @@ struct rk3x_i2c_soc_data {
  * @clk: function clk for rk3399 or function & Bus clks for others
  * @pclk: Bus clk for rk3399
  * @clk_rate_nb: i2c clk rate change notify
+ * @irq: irq number
  * @t: I2C known timing information
  * @lock: spinlock for the i2c bus
  * @wait: the waitqueue to wait for i2c transfer
@@ -200,6 +201,7 @@ struct rk3x_i2c {
 	struct clk *clk;
 	struct clk *pclk;
 	struct notifier_block clk_rate_nb;
+	int irq;
 
 	/* Settings */
 	struct i2c_timings t;
@@ -1087,13 +1089,18 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 
 		spin_unlock_irqrestore(&i2c->lock, flags);
 
-		rk3x_i2c_start(i2c);
-
 		if (!polling) {
+			rk3x_i2c_start(i2c);
+
 			timeout = wait_event_timeout(i2c->wait, !i2c->busy,
 						     msecs_to_jiffies(WAIT_TIMEOUT));
 		} else {
+			disable_irq(i2c->irq);
+			rk3x_i2c_start(i2c);
+
 			timeout = rk3x_i2c_wait_xfer_poll(i2c);
+
+			enable_irq(i2c->irq);
 		}
 
 		spin_lock_irqsave(&i2c->lock, flags);
@@ -1310,6 +1317,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	i2c->irq = irq;
+
 	platform_set_drvdata(pdev, i2c);
 
 	if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {
-- 
2.43.0

[PATCH AUTOSEL 6.1 20/24] drm/amd/display: get dprefclk ss info from integration info table

[Sasha Levin]

From: Charlene Liu <charlene.liu@amd.com>

[ Upstream commit 51e7b64690776a9981355428b537af9048308a95 ]

[why & how]
we have two SSC_En:
we get ssc_info from dce_info for MPLL_SSC_EN.
we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info,
is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable.

since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/bios/bios_parser2.c    | 19 ++++++++++++++-----
 .../display/include/grph_object_ctrl_defs.h   |  2 ++
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
index e507d2e1410b7..93e40e0a15087 100644
--- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
+++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c
@@ -1018,13 +1018,20 @@ static enum bp_result get_ss_info_v4_5(
 		DC_LOG_BIOS("AS_SIGNAL_TYPE_HDMI ss_percentage: %d\n", ss_info->spread_spectrum_percentage);
 		break;
 	case AS_SIGNAL_TYPE_DISPLAY_PORT:
-		ss_info->spread_spectrum_percentage =
+		if (bp->base.integrated_info) {
+			DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", bp->base.integrated_info->gpuclk_ss_percentage);
+			ss_info->spread_spectrum_percentage =
+					bp->base.integrated_info->gpuclk_ss_percentage;
+			ss_info->type.CENTER_MODE =
+					bp->base.integrated_info->gpuclk_ss_type;
+		} else {
+			ss_info->spread_spectrum_percentage =
 				disp_cntl_tbl->dp_ss_percentage;
-		ss_info->spread_spectrum_range =
+			ss_info->spread_spectrum_range =
 				disp_cntl_tbl->dp_ss_rate_10hz * 10;
-		if (disp_cntl_tbl->dp_ss_mode & ATOM_SS_CENTRE_SPREAD_MODE)
-			ss_info->type.CENTER_MODE = true;
-
+			if (disp_cntl_tbl->dp_ss_mode & ATOM_SS_CENTRE_SPREAD_MODE)
+				ss_info->type.CENTER_MODE = true;
+		}
 		DC_LOG_BIOS("AS_SIGNAL_TYPE_DISPLAY_PORT ss_percentage: %d\n", ss_info->spread_spectrum_percentage);
 		break;
 	case AS_SIGNAL_TYPE_GPU_PLL:
@@ -2830,6 +2837,8 @@ static enum bp_result get_integrated_info_v2_2(
 	info->ma_channel_number = info_v2_2->umachannelnumber;
 	info->dp_ss_control =
 		le16_to_cpu(info_v2_2->reserved1);
+	info->gpuclk_ss_percentage = info_v2_2->gpuclk_ss_percentage;
+	info->gpuclk_ss_type = info_v2_2->gpuclk_ss_type;
 
 	for (i = 0; i < NUMBER_OF_UCHAR_FOR_GUID; ++i) {
 		info->ext_disp_conn_info.gu_id[i] =
diff --git a/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h b/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h
index bc96d02113608..813463ffe15c5 100644
--- a/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h
+++ b/drivers/gpu/drm/amd/display/include/grph_object_ctrl_defs.h
@@ -417,6 +417,8 @@ struct integrated_info {
 	/* V2.1 */
 	struct edp_info edp1_info;
 	struct edp_info edp2_info;
+	uint32_t gpuclk_ss_percentage;
+	uint32_t gpuclk_ss_type;
 };
 
 /*
-- 
2.43.0

[PATCH AUTOSEL 6.1 21/24] pinctrl: cy8c95x0: Fix typo

[Sasha Levin]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

[ Upstream commit 47b1fa48116238208c1b1198dba10f56fc1b6eb2 ]

Fix typo to make pinctrl-cy8c95x compile again.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index 68509a2301b8f..99c3fe4ca518e 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -857,7 +857,7 @@ static int cy8c95x0_setup_gpiochip(struct cy8c95x0_pinctrl *chip)
 	gc->get_direction = cy8c95x0_gpio_get_direction;
 	gc->get_multiple = cy8c95x0_gpio_get_multiple;
 	gc->set_multiple = cy8c95x0_gpio_set_multiple;
-	gc->set_config = gpiochip_generic_config,
+	gc->set_config = gpiochip_generic_config;
 	gc->can_sleep = true;
 	gc->add_pin_ranges = cy8c95x0_add_pin_ranges;
 
-- 
2.43.0

[PATCH AUTOSEL 6.1 22/24] pinctrl: cy8c95x0: Fix regression

[Sasha Levin]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

[ Upstream commit 04dfca968cf7349773126340991b68a83378aca2 ]

Commit 1fa3df901f2c ("pinctrl: cy8c95x0: Remove custom ->set_config()")
removed support for PIN_CONFIG_INPUT_ENABLE and
PIN_CONFIG_OUTPUT.

Add the following options to restore functionality:
- PIN_CONFIG_INPUT_ENABLE
- PIN_CONFIG_OUTPUT_ENABLE

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-2-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index 99c3fe4ca518e..501b7c181df00 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -304,6 +304,9 @@ static const char * const cy8c95x0_groups[] = {
 	"gp77",
 };
 
+static int cy8c95x0_pinmux_direction(struct cy8c95x0_pinctrl *chip,
+				     unsigned int pin, bool input);
+
 static inline u8 cypress_get_port(struct cy8c95x0_pinctrl *chip, unsigned int pin)
 {
 	/* Account for GPORT2 which only has 4 bits */
@@ -764,6 +767,7 @@ static int cy8c95x0_gpio_set_pincfg(struct cy8c95x0_pinctrl *chip,
 	u8 port = cypress_get_port(chip, off);
 	u8 bit = cypress_get_pin_mask(chip, off);
 	unsigned long param = pinconf_to_config_param(config);
+	unsigned long arg = pinconf_to_config_argument(config);
 	unsigned int reg;
 	int ret;
 
@@ -802,6 +806,12 @@ static int cy8c95x0_gpio_set_pincfg(struct cy8c95x0_pinctrl *chip,
 	case PIN_CONFIG_MODE_PWM:
 		reg = CY8C95X0_PWMSEL;
 		break;
+	case PIN_CONFIG_OUTPUT_ENABLE:
+		ret = cy8c95x0_pinmux_direction(chip, off, !arg);
+		goto out;
+	case PIN_CONFIG_INPUT_ENABLE:
+		ret = cy8c95x0_pinmux_direction(chip, off, arg);
+		goto out;
 	default:
 		ret = -ENOTSUPP;
 		goto out;
-- 
2.43.0

[PATCH AUTOSEL 6.1 23/24] pinctrl: cy8c95x0: Fix get_pincfg

[Sasha Levin]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

[ Upstream commit 94c71705cc49092cef60ece13a28680809096fd4 ]

Invert the register value for PIN_CONFIG_OUTPUT_ENABLE to return
the opposite of PIN_CONFIG_INPUT_ENABLE.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Link: https://lore.kernel.org/r/20231219125120.4028862-3-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-cy8c95x0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index 501b7c181df00..2a6158a052a31 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -752,6 +752,8 @@ static int cy8c95x0_gpio_get_pincfg(struct cy8c95x0_pinctrl *chip,
 	ret = regmap_read(chip->regmap, reg, &reg_val);
 	if (reg_val & bit)
 		arg = 1;
+	if (param == PIN_CONFIG_OUTPUT_ENABLE)
+		arg = !arg;
 
 	*config = pinconf_to_config_packed(param, (u16)arg);
 out:
-- 
2.43.0

[PATCH AUTOSEL 6.1 24/24] ida: Fix crash in ida_free when the bitmap is empty

[Sasha Levin]

From: "Matthew Wilcox (Oracle)" <willy@infradead.org>

[ Upstream commit af73483f4e8b6f5c68c9aa63257bdd929a9c194a ]

The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit.  Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.

Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/idr.c      |  2 +-
 lib/test_ida.c | 40 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/lib/idr.c b/lib/idr.c
index 13f2758c23773..da36054c3ca02 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -508,7 +508,7 @@ void ida_free(struct ida *ida, unsigned int id)
 			goto delete;
 		xas_store(&xas, xa_mk_value(v));
 	} else {
-		if (!test_bit(bit, bitmap->bitmap))
+		if (!bitmap || !test_bit(bit, bitmap->bitmap))
 			goto err;
 		__clear_bit(bit, bitmap->bitmap);
 		xas_set_mark(&xas, XA_FREE_MARK);
diff --git a/lib/test_ida.c b/lib/test_ida.c
index b068806259615..55105baa19da9 100644
--- a/lib/test_ida.c
+++ b/lib/test_ida.c
@@ -150,6 +150,45 @@ static void ida_check_conv(struct ida *ida)
 	IDA_BUG_ON(ida, !ida_is_empty(ida));
 }
 
+/*
+ * Check various situations where we attempt to free an ID we don't own.
+ */
+static void ida_check_bad_free(struct ida *ida)
+{
+	unsigned long i;
+
+	printk("vvv Ignore \"not allocated\" warnings\n");
+	/* IDA is empty; all of these will fail */
+	ida_free(ida, 0);
+	for (i = 0; i < 31; i++)
+		ida_free(ida, 1 << i);
+
+	/* IDA contains a single value entry */
+	IDA_BUG_ON(ida, ida_alloc_min(ida, 3, GFP_KERNEL) != 3);
+	ida_free(ida, 0);
+	for (i = 0; i < 31; i++)
+		ida_free(ida, 1 << i);
+
+	/* IDA contains a single bitmap */
+	IDA_BUG_ON(ida, ida_alloc_min(ida, 1023, GFP_KERNEL) != 1023);
+	ida_free(ida, 0);
+	for (i = 0; i < 31; i++)
+		ida_free(ida, 1 << i);
+
+	/* IDA contains a tree */
+	IDA_BUG_ON(ida, ida_alloc_min(ida, (1 << 20) - 1, GFP_KERNEL) != (1 << 20) - 1);
+	ida_free(ida, 0);
+	for (i = 0; i < 31; i++)
+		ida_free(ida, 1 << i);
+	printk("^^^ \"not allocated\" warnings over\n");
+
+	ida_free(ida, 3);
+	ida_free(ida, 1023);
+	ida_free(ida, (1 << 20) - 1);
+
+	IDA_BUG_ON(ida, !ida_is_empty(ida));
+}
+
 static DEFINE_IDA(ida);
 
 static int ida_checks(void)
@@ -162,6 +201,7 @@ static int ida_checks(void)
 	ida_check_leaf(&ida, 1024 * 64);
 	ida_check_max(&ida);
 	ida_check_conv(&ida);
+	ida_check_bad_free(&ida);
 
 	printk("IDA: %u of %u tests passed\n", tests_passed, tests_run);
 	return (tests_run != tests_passed) ? 0 : -EINVAL;
-- 
2.43.0