patch "Revert "usb: dwc3: Soft reset phy on probe for host"" added to usb-next

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    Revert "usb: dwc3: Soft reset phy on probe for host"

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will also be merged in the next major kernel release
during the merge window.

If you have any questions about this process, please let me know.


From 7059fbebcb00554c3f31e5b5d93ef6d2d96dc7b4 Mon Sep 17 00:00:00 2001
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Date: Fri, 22 Dec 2023 22:11:27 +0000
Subject: Revert "usb: dwc3: Soft reset phy on probe for host"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This reverts commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b.

The phy soft reset GUSB2PHYCFG.PHYSOFTRST only applies to UTMI phy, not
ULPI. This fix is incomplete.

Cc:  <stable@vger.kernel.org>
Fixes: 8bea147dfdf8 ("usb: dwc3: Soft reset phy on probe for host")
Reported-by: Köry Maincent <kory.maincent@bootlin.com>
Closes: https://lore.kernel.org/linux-usb/20231205151959.5236c231@kmaincent-XPS-13-7390
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/29a26593a60eba727de872a3e580a674807b3339.1703282469.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.c | 39 +--------------------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b101dbf8c5dc..832c41fec4f7 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -279,46 +279,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 	 * XHCI driver will reset the host block. If dwc3 was configured for
 	 * host-only mode or current role is host, then we can return early.
 	 */
-	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+	if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
-	/*
-	 * If the dr_mode is host and the dwc->current_dr_role is not the
-	 * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode
-	 * isn't executed yet. Ensure the phy is ready before the controller
-	 * updates the GCTL.PRTCAPDIR or other settings by soft-resetting
-	 * the phy.
-	 *
-	 * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n
-	 * is port index. If this is a multiport host, then we need to reset
-	 * all active ports.
-	 */
-	if (dwc->dr_mode == USB_DR_MODE_HOST) {
-		u32 usb3_port;
-		u32 usb2_port;
-
-		usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
-		usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST;
-		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port);
-
-		usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-		usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST;
-		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port);
-
-		/* Small delay for phy reset assertion */
-		usleep_range(1000, 2000);
-
-		usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST;
-		dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port);
-
-		usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
-		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port);
-
-		/* Wait for clock synchronization */
-		msleep(50);
-		return 0;
-	}
-
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg |= DWC3_DCTL_CSFTRST;
 	reg &= ~DWC3_DCTL_RUN_STOP;
-- 
2.43.0