[PATCH 5.10 21/75] i2c: aspeed: Handle the coalesced stop conditions with the start conditions.

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quan Nguyen <quan@os.amperecomputing.com>

[ Upstream commit b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ]

Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.

"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"

Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-aspeed.c | 48 ++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a1bc8a2c3eadc..b915dfcff00d8 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -250,18 +250,46 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 	if (!slave)
 		return 0;
 
-	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	/*
+	 * Handle stop conditions early, prior to SLAVE_MATCH. Some masters may drive
+	 * transfers with low enough latency between the nak/stop phase of the current
+	 * command and the start/address phase of the following command that the
+	 * interrupts are coalesced by the time we process them.
+	 */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
+	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
+		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	/* Propagate any stop conditions to the slave implementation. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+	}
 
-	/* Slave was requested, restart state machine. */
+	/*
+	 * Now that we've dealt with any potentially coalesced stop conditions,
+	 * address any start conditions.
+	 */
 	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
 		irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
 		bus->slave_state = ASPEED_I2C_SLAVE_START;
 	}
 
-	/* Slave is not currently active, irq was for someone else. */
+	/*
+	 * If the slave has been stopped and not started then slave interrupt
+	 * handling is complete.
+	 */
 	if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 		return irq_handled;
 
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
 	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
 		irq_status, command);
 
@@ -280,17 +308,6 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 	}
 
-	/* Slave was asked to stop. */
-	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
-		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
-		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
-	}
-	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
-	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
-		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
-		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
-	}
-
 	switch (bus->slave_state) {
 	case ASPEED_I2C_SLAVE_READ_REQUESTED:
 		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
@@ -319,8 +336,7 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
 		break;
 	case ASPEED_I2C_SLAVE_STOP:
-		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
-		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+		/* Stop event handling is done early. Unreachable. */
 		break;
 	case ASPEED_I2C_SLAVE_START:
 		/* Slave was just started. Waiting for the next event. */;
-- 
2.43.0