[PATCH 4.14 00/21] 4.14.335-rc1 review

[PATCH 4.14 00/21] 4.14.335-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.335 release.
There are 21 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 07 Jan 2024 14:38:02 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.335-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.335-rc1

Sarthak Kukreti <sarthakkukreti@chromium.org>
    block: Don't invalidate pagecache for invalid falloc modes

Mikulas Patocka <mpatocka@redhat.com>
    dm-integrity: don't modify bio's immutable bio_vec in integrity_metadata()

Rouven Czerwinski <r.czerwinski@pengutronix.de>
    net: rfkill: gpio: set GPIO direction

Fedor Pchelkin <pchelkin@ispras.ru>
    net: 9p: avoid freeing uninit memory in p9pdu_vreadf

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_event: Fix not checking if HCI_OP_INQUIRY has been sent

Reinhard Speyerer <rspmn@arcor.de>
    USB: serial: option: add Quectel RM500Q R13 firmware support

Slark Xiao <slark_xiao@163.com>
    USB: serial: option: add Foxconn T99W265 with new baseline

Alper Ak <alperyasinak1@gmail.com>
    USB: serial: option: add Quectel EG912Y module support

Mark Glover <mark.glover@actisense.com>
    USB: serial: ftdi_sio: update Actisense PIDs constant names

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211: fix certs build to not depend on file order

Chen-Yu Tsai <wens@kernel.org>
    wifi: cfg80211: Add my certificate

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table

Haoran Liu <liuhaoran14@163.com>
    Input: ipaq-micro-keys - add error handling for devm_kmemdup

Su Hui <suhui@nfschina.com>
    iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw

Alexis Lothoré <alexis.lothore@bootlin.com>
    pinctrl: at91-pio4: use dedicated lock class for IRQ

Liu Jian <liujian56@huawei.com>
    net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()

Zhipeng Lu <alexious@zju.edu.cn>
    ethernet: atheros: fix a memleak in atl1e_setup_ring_resources

Eric Dumazet <edumazet@google.com>
    net: sched: ife: fix potential use-after-free

Johannes Berg <johannes.berg@intel.com>
    wifi: mac80211: mesh_plink: fix matches_local logic

Heiko Carstens <hca@linux.ibm.com>
    s390/vx: fix save/restore of fpu kernel context

Kunwu Chan <chentao@kylinos.cn>
    ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init


-------------

Diffstat:

 Makefile                                        |  4 +-
 arch/arm/mach-omap2/id.c                        |  5 ++
 arch/s390/include/asm/fpu/api.h                 |  2 +-
 drivers/iio/common/ms_sensors/ms_sensors_i2c.c  |  4 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c      |  4 +-
 drivers/input/keyboard/ipaq-micro-keys.c        |  3 +
 drivers/md/dm-integrity.c                       | 11 ++--
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c |  5 +-
 drivers/pinctrl/pinctrl-at91-pio4.c             |  8 +++
 drivers/usb/serial/ftdi_sio.c                   |  6 +-
 drivers/usb/serial/ftdi_sio_ids.h               |  6 +-
 drivers/usb/serial/option.c                     |  5 ++
 fs/block_dev.c                                  |  9 ++-
 net/8021q/vlan_core.c                           |  9 ++-
 net/9p/protocol.c                               | 17 +++--
 net/bluetooth/hci_event.c                       |  3 +-
 net/ife/ife.c                                   |  1 +
 net/mac80211/mesh_plink.c                       | 10 +--
 net/rfkill/rfkill-gpio.c                        |  8 +++
 net/wireless/certs/wens.hex                     | 87 +++++++++++++++++++++++++
 20 files changed, 175 insertions(+), 32 deletions(-)

[PATCH 4.14 01/21] ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit c72b9c33ef9695ad7ce7a6eb39a9df8a01b70796 ]

kasprintf() returns a pointer to dynamically allocated memory which can
be NULL upon failure. When 'soc_dev_attr->family' is NULL,it'll trigger
the null pointer dereference issue, such as in 'soc_info_show'.

And when 'soc_device_register' fails, it's necessary to release
'soc_dev_attr->family' to avoid memory leaks.

Fixes: 6770b2114325 ("ARM: OMAP2+: Export SoC information to userspace")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Message-ID: <20231123145237.609442-1-chentao@kylinos.cn>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/id.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 79d71b1eae594..1bc17fd49e488 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -784,10 +784,15 @@ void __init omap_soc_device_init(void)
 
 	soc_dev_attr->machine  = soc_name;
 	soc_dev_attr->family   = omap_get_family();
+	if (!soc_dev_attr->family) {
+		kfree(soc_dev_attr);
+		return;
+	}
 	soc_dev_attr->revision = soc_rev;
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
 		kfree(soc_dev_attr);
 		return;
 	}
-- 
2.43.0

[PATCH 4.14 02/21] s390/vx: fix save/restore of fpu kernel context

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit e6b2dab41888332bf83f592131e7ea07756770a4 ]

The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.

This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.

Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.

Fix this by using the correct bits for KERNEL_FPR.

Fixes: 7f79695cc1b6 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/fpu/api.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/include/asm/fpu/api.h b/arch/s390/include/asm/fpu/api.h
index 34a7ae68485c6..be16a6c0f1276 100644
--- a/arch/s390/include/asm/fpu/api.h
+++ b/arch/s390/include/asm/fpu/api.h
@@ -76,7 +76,7 @@ static inline int test_fp_ctl(u32 fpc)
 #define KERNEL_VXR_HIGH		(KERNEL_VXR_V16V23|KERNEL_VXR_V24V31)
 
 #define KERNEL_VXR		(KERNEL_VXR_LOW|KERNEL_VXR_HIGH)
-#define KERNEL_FPR		(KERNEL_FPC|KERNEL_VXR_V0V7)
+#define KERNEL_FPR		(KERNEL_FPC|KERNEL_VXR_LOW)
 
 struct kernel_fpu;
 
-- 
2.43.0

[PATCH 4.14 03/21] wifi: mac80211: mesh_plink: fix matches_local logic

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 8c386b166e2517cf3a123018e77941ec22625d0f ]

During refactoring the "else" here got lost, add it back.

Fixes: c99a89edb106 ("mac80211: factor out plink event gathering")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231211085121.795480fa0e0b.I017d501196a5bbdcd9afd33338d342d6fe1edd79@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh_plink.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index f69c6c38ca439..ab46de4536c46 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -1025,8 +1025,8 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
 	case WLAN_SP_MESH_PEERING_OPEN:
 		if (!matches_local)
 			event = OPN_RJCT;
-		if (!mesh_plink_free_count(sdata) ||
-		    (sta->mesh->plid && sta->mesh->plid != plid))
+		else if (!mesh_plink_free_count(sdata) ||
+			 (sta->mesh->plid && sta->mesh->plid != plid))
 			event = OPN_IGNR;
 		else
 			event = OPN_ACPT;
@@ -1034,9 +1034,9 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
 	case WLAN_SP_MESH_PEERING_CONFIRM:
 		if (!matches_local)
 			event = CNF_RJCT;
-		if (!mesh_plink_free_count(sdata) ||
-		    sta->mesh->llid != llid ||
-		    (sta->mesh->plid && sta->mesh->plid != plid))
+		else if (!mesh_plink_free_count(sdata) ||
+			 sta->mesh->llid != llid ||
+			 (sta->mesh->plid && sta->mesh->plid != plid))
 			event = CNF_IGNR;
 		else
 			event = CNF_ACPT;
-- 
2.43.0

[PATCH 4.14 04/21] net: sched: ife: fix potential use-after-free

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 19391a2ca98baa7b80279306cdf7dd43f81fa595 ]

ife_decode() calls pskb_may_pull() two times, we need to reload
ifehdr after the second one, or risk use-after-free as reported
by syzbot:

BUG: KASAN: slab-use-after-free in __ife_tlv_meta_valid net/ife/ife.c:108 [inline]
BUG: KASAN: slab-use-after-free in ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
Read of size 2 at addr ffff88802d7300a4 by task syz-executor.5/22323

CPU: 0 PID: 22323 Comm: syz-executor.5 Not tainted 6.7.0-rc3-syzkaller-00804-g074ac38d5b95 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
__ife_tlv_meta_valid net/ife/ife.c:108 [inline]
ife_tlv_meta_decode+0x1d1/0x210 net/ife/ife.c:131
tcf_ife_decode net/sched/act_ife.c:739 [inline]
tcf_ife_act+0x4e3/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fe9acc7cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe9ada450c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fe9acd9bf80 RCX: 00007fe9acc7cae9
RDX: 000000000000fce0 RSI: 00000000200002c0 RDI: 0000000000000003
RBP: 00007fe9accc847a R08: 0000000020000140 R09: 0000000000000014
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fe9acd9bf80 R15: 00007ffd5427ae78
</TASK>

Allocated by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0xa2/0xb0 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:198 [inline]
__do_kmalloc_node mm/slab_common.c:1007 [inline]
__kmalloc_node_track_caller+0x5a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Freed by task 22323:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
__kmem_cache_free+0xc0/0x180 mm/slub.c:3822
skb_kfree_head net/core/skbuff.c:950 [inline]
skb_free_head+0x110/0x1b0 net/core/skbuff.c:962
pskb_expand_head+0x3c5/0x1170 net/core/skbuff.c:2130
__pskb_pull_tail+0xe1/0x1830 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2685 [inline]
pskb_may_pull include/linux/skbuff.h:2693 [inline]
ife_decode+0x394/0x4f0 net/ife/ife.c:82
tcf_ife_decode net/sched/act_ife.c:727 [inline]
tcf_ife_act+0x43b/0x1cd0 net/sched/act_ife.c:879
tc_act include/net/tc_wrapper.h:221 [inline]
tcf_action_exec+0x1ac/0x620 net/sched/act_api.c:1079
tcf_exts_exec include/net/pkt_cls.h:344 [inline]
mall_classify+0x201/0x310 net/sched/cls_matchall.c:42
tc_classify include/net/tc_wrapper.h:227 [inline]
__tcf_classify net/sched/cls_api.c:1703 [inline]
tcf_classify+0x82f/0x1260 net/sched/cls_api.c:1800
hfsc_classify net/sched/sch_hfsc.c:1147 [inline]
hfsc_enqueue+0x315/0x1060 net/sched/sch_hfsc.c:1546
dev_qdisc_enqueue+0x3f/0x230 net/core/dev.c:3739
__dev_xmit_skb net/core/dev.c:3828 [inline]
__dev_queue_xmit+0x1de1/0x3d30 net/core/dev.c:4311
dev_queue_xmit include/linux/netdevice.h:3165 [inline]
packet_xmit+0x237/0x350 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x24aa/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b

The buggy address belongs to the object at ffff88802d730000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 164 bytes inside of
freed 8192-byte region [ffff88802d730000, ffff88802d732000)

The buggy address belongs to the physical page:
page:ffffea0000b5cc00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2d730
head:ffffea0000b5cc00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000840 ffff888013042280 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 22323, tgid 22320 (syz-executor.5), ts 950317230369, free_ts 950233467461
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1544
prep_new_page mm/page_alloc.c:1551 [inline]
get_page_from_freelist+0xa28/0x3730 mm/page_alloc.c:3319
__alloc_pages+0x22e/0x2420 mm/page_alloc.c:4575
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab mm/slub.c:2017 [inline]
new_slab+0x283/0x3c0 mm/slub.c:2070
___slab_alloc+0x979/0x1500 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
__kmem_cache_alloc_node+0x131/0x310 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x4a/0x90 mm/slab_common.c:1027
kmalloc_reserve+0xef/0x260 net/core/skbuff.c:582
__alloc_skb+0x12b/0x330 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1298 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x1e2a/0x5200 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1144 [inline]
free_unref_page_prepare+0x53c/0xb80 mm/page_alloc.c:2354
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2494
__unfreeze_partials+0x226/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc_lru+0x219/0x6f0 mm/slub.c:3509
alloc_inode_sb include/linux/fs.h:2937 [inline]
ext4_alloc_inode+0x28/0x650 fs/ext4/super.c:1408
alloc_inode+0x5d/0x220 fs/inode.c:261
new_inode_pseudo fs/inode.c:1006 [inline]
new_inode+0x22/0x260 fs/inode.c:1032
__ext4_new_inode+0x333/0x5200 fs/ext4/ialloc.c:958
ext4_symlink+0x5d7/0xa20 fs/ext4/namei.c:3398
vfs_symlink fs/namei.c:4464 [inline]
vfs_symlink+0x3e5/0x620 fs/namei.c:4448
do_symlinkat+0x25f/0x310 fs/namei.c:4490
__do_sys_symlinkat fs/namei.c:4506 [inline]
__se_sys_symlinkat fs/namei.c:4503 [inline]
__x64_sys_symlinkat+0x97/0xc0 fs/namei.c:4503
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82

Fixes: d57493d6d1be ("net: sched: ife: check on metadata length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ife/ife.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ife/ife.c b/net/ife/ife.c
index 13bbf8cb6a396..be05b690b9ef2 100644
--- a/net/ife/ife.c
+++ b/net/ife/ife.c
@@ -82,6 +82,7 @@ void *ife_decode(struct sk_buff *skb, u16 *metalen)
 	if (unlikely(!pskb_may_pull(skb, total_pull)))
 		return NULL;
 
+	ifehdr = (struct ifeheadr *)(skb->data + skb->dev->hard_header_len);
 	skb_set_mac_header(skb, total_pull);
 	__skb_pull(skb, total_pull);
 	*metalen = ifehdrln - IFE_METAHDRLEN;
-- 
2.43.0

[PATCH 4.14 05/21] ethernet: atheros: fix a memleak in atl1e_setup_ring_resources

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhipeng Lu <alexious@zju.edu.cn>

[ Upstream commit 309fdb1c33fe726d92d0030481346f24e1b01f07 ]

In the error handling of 'offset > adapter->ring_size', the
tx_ring->tx_buffer allocated by kzalloc should be freed,
instead of 'goto failed' instantly.

Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 33a688d8aaba9..3c6a32d548468 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -880,10 +880,13 @@ static int atl1e_setup_ring_resources(struct atl1e_adapter *adapter)
 		netdev_err(adapter->netdev, "offset(%d) > ring size(%d) !!\n",
 			   offset, adapter->ring_size);
 		err = -1;
-		goto failed;
+		goto free_buffer;
 	}
 
 	return 0;
+free_buffer:
+	kfree(tx_ring->tx_buffer);
+	tx_ring->tx_buffer = NULL;
 failed:
 	if (adapter->ring_vir_addr != NULL) {
 		pci_free_consistent(pdev, adapter->ring_size,
-- 
2.43.0

[PATCH 4.14 06/21] net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Jian <liujian56@huawei.com>

[ Upstream commit 01a564bab4876007ce35f312e16797dfe40e4823 ]

I got the below warning trace:

WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify
CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0
Call Trace:
 rtnl_dellink
 rtnetlink_rcv_msg
 netlink_rcv_skb
 netlink_unicast
 netlink_sendmsg
 __sock_sendmsg
 ____sys_sendmsg
 ___sys_sendmsg
 __sys_sendmsg
 do_syscall_64
 entry_SYSCALL_64_after_hwframe

It can be repoduced via:

    ip netns add ns1
    ip netns exec ns1 ip link add bond0 type bond mode 0
    ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
    ip netns exec ns1 ip link set bond_slave_1 master bond0
[1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off
[2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0
[3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0
[4] ip netns exec ns1 ip link set bond_slave_1 nomaster
[5] ip netns exec ns1 ip link del veth2
    ip netns del ns1

This is all caused by command [1] turning off the rx-vlan-filter function
of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix
incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands
[2] [3] add the same vid to slave and master respectively, causing
command [4] to empty slave->vlan_info. The following command [5] triggers
this problem.

To fix this problem, we should add VLAN_FILTER feature checks in
vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect
addition or deletion of vlan_vid information.

Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/8021q/vlan_core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 45c9bf5ff3a0c..815d4fb052bde 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -329,6 +329,8 @@ int vlan_vids_add_by_dev(struct net_device *dev,
 		return 0;
 
 	list_for_each_entry(vid_info, &vlan_info->vid_list, list) {
+		if (!vlan_hw_filter_capable(by_dev, vid_info->proto))
+			continue;
 		err = vlan_vid_add(dev, vid_info->proto, vid_info->vid);
 		if (err)
 			goto unwind;
@@ -339,6 +341,8 @@ int vlan_vids_add_by_dev(struct net_device *dev,
 	list_for_each_entry_continue_reverse(vid_info,
 					     &vlan_info->vid_list,
 					     list) {
+		if (!vlan_hw_filter_capable(by_dev, vid_info->proto))
+			continue;
 		vlan_vid_del(dev, vid_info->proto, vid_info->vid);
 	}
 
@@ -358,8 +362,11 @@ void vlan_vids_del_by_dev(struct net_device *dev,
 	if (!vlan_info)
 		return;
 
-	list_for_each_entry(vid_info, &vlan_info->vid_list, list)
+	list_for_each_entry(vid_info, &vlan_info->vid_list, list) {
+		if (!vlan_hw_filter_capable(by_dev, vid_info->proto))
+			continue;
 		vlan_vid_del(dev, vid_info->proto, vid_info->vid);
+	}
 }
 EXPORT_SYMBOL(vlan_vids_del_by_dev);
 
-- 
2.43.0

[PATCH 4.14 07/21] pinctrl: at91-pio4: use dedicated lock class for IRQ

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexis Lothoré <alexis.lothore@bootlin.com>

[ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]

Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:

 ============================================
 WARNING: possible recursive locking detected
 6.7.0-rc5-wt+ #532 Not tainted
 --------------------------------------------
 sh/92 is trying to acquire lock:
 c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 but task is already holding lock:
 c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 6 locks held by sh/92:
  #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
  #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
  #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
  #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
  #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
  #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 stack backtrace:
 CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
 Hardware name: Atmel SAMA5
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x34/0x48
  dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
  __lock_acquire from lock_acquire.part.0+0x124/0x2d0
  lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
  _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
  __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
  irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
  atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
  irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
  gpio_keys_suspend from dpm_run_callback+0xe4/0x248
  dpm_run_callback from __device_suspend+0x234/0x91c
  __device_suspend from dpm_suspend+0x224/0x43c
  dpm_suspend from dpm_suspend_start+0x9c/0xa8
  dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
  suspend_devices_and_enter from pm_suspend+0x460/0x4e8
  pm_suspend from state_store+0x78/0xe4
  state_store from kernfs_fop_write_iter+0x1a0/0x284
  kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
  vfs_write from ksys_write+0xd8/0x178
  ksys_write from ret_fast_syscall+0x0/0x1c
 Exception stack(0xc52b3fa8 to 0xc52b3ff0)
 3fa0:                   00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
 3fe0: 00000004 b6c61678 aec5a041 aebf1a26

This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.

Fix lockdep false positive by setting a different class for parent and
children IRQ

Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 8f18a35b66b61..5ef7dd8c9ccf0 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -899,6 +899,13 @@ static const struct of_device_id atmel_pctrl_of_match[] = {
 	}
 };
 
+/*
+ * This lock class allows to tell lockdep that parent IRQ and children IRQ do
+ * not share the same class so it does not raise false positive
+ */
+static struct lock_class_key atmel_lock_key;
+static struct lock_class_key atmel_request_key;
+
 static int atmel_pinctrl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1044,6 +1051,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
 		irq_set_chip_and_handler(irq, &atmel_gpio_irq_chip,
 					 handle_simple_irq);
 		irq_set_chip_data(irq, atmel_pioctrl);
+		irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key);
 		dev_dbg(dev,
 			"atmel gpio irq domain: hwirq: %d, linux irq: %d\n",
 			i, irq);
-- 
2.43.0

[PATCH 4.14 08/21] iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Su Hui <suhui@nfschina.com>

[ Upstream commit c3df0e29fb7788c4b3ddf37d5ed87dda2b822943 ]

inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the
true value rather than only return IIO_VAL_INT.

Fixes: d5098447147c ("iio: imu: mpu6050: add calibration offset support")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 44830bce13dfe..689dfd1ef98b4 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -421,13 +421,13 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 			ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset,
 						chan->channel2, val);
 			mutex_unlock(&st->lock);
-			return IIO_VAL_INT;
+			return ret;
 		case IIO_ACCEL:
 			mutex_lock(&st->lock);
 			ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset,
 						chan->channel2, val);
 			mutex_unlock(&st->lock);
-			return IIO_VAL_INT;
+			return ret;
 
 		default:
 			return -EINVAL;
-- 
2.43.0

[PATCH 4.14 09/21] Input: ipaq-micro-keys - add error handling for devm_kmemdup

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haoran Liu <liuhaoran14@163.com>

[ Upstream commit 59b6a747e2d39227ac2325c5e29d6ab3bb070c2a ]

Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.

Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/ipaq-micro-keys.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c
index 602900d1f9378..2d0d09ee9ab08 100644
--- a/drivers/input/keyboard/ipaq-micro-keys.c
+++ b/drivers/input/keyboard/ipaq-micro-keys.c
@@ -108,6 +108,9 @@ static int micro_key_probe(struct platform_device *pdev)
 	keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
 			   keys->input->keycodesize * keys->input->keycodemax,
 			   GFP_KERNEL);
+	if (!keys->codes)
+		return -ENOMEM;
+
 	keys->input->keycode = keys->codes;
 
 	__set_bit(EV_KEY, keys->input->evbit);
-- 
2.43.0

[PATCH 4.14 10/21] iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit 54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream.

The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.

In summary, the 40 and 70 humidity measurement times are swapped.

The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:

--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
|   0   |   0   | 12 |  14  |  16000   |  50000  |
--------------------------------------------------
|   0   |   1   | 8  |  12  |  3000    |  13000  |
--------------------------------------------------
|   1   |   0   | 10 |  13  |  5000    |  25000  |
--------------------------------------------------
|   1   |   1   | 11 |  11  |  8000    |  7000   |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.

The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:

Index    [7,0]
--------------
idx 0     0,0
idx 1     1,0
idx 2     0,1
idx 3     1,1

That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]

On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:

Index    [7,0]    Trh
-----------------------
idx 0     0,0     16000  -> right, [0,0] selects 12 bits (Trh = 16000)
idx 1     1,0     3000   -> wrong! [1,0] selects 10 bits (Trh = 5000)
idx 2     0,1     5000   -> wrong! [0,1] selects 8 bits (Trh = 3000)
idx 3     1,1     8000   -> right, [1,1] selects 11 bits (Trh = 8000)

The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.

So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.

The right table should be the following: [16000, 5000, 3000, 8000]

Fix the humidity measurement time array with the right idex/value
coding.

[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);

Fixes: d574a87cc311 ("Add meas-spec sensors common part")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/common/ms_sensors/ms_sensors_i2c.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
+++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
@@ -16,8 +16,8 @@
 /* Conversion times in us */
 static const u16 ms_sensors_ht_t_conversion_time[] = { 50000, 25000,
 						       13000, 7000 };
-static const u16 ms_sensors_ht_h_conversion_time[] = { 16000, 3000,
-						       5000, 8000 };
+static const u16 ms_sensors_ht_h_conversion_time[] = { 16000, 5000,
+						       3000, 8000 };
 static const u16 ms_sensors_tp_conversion_time[] = { 500, 1100, 2100,
 						     4100, 8220, 16440 };
 

[PATCH 4.14 11/21] wifi: cfg80211: Add my certificate

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@kernel.org>

commit fb768d3b13ffa325b7e84480d488ac799c9d2cd7 upstream.

As announced [1][2], I have taken over maintainership of the
wireless-regdb project.

Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.

This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.

[1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/
[2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/

Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Seth Forshee <sforshee@kernel.org>
Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.tw
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/certs/wens.hex |   87 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 net/wireless/certs/wens.hex

--- /dev/null
+++ b/net/wireless/certs/wens.hex
@@ -0,0 +1,87 @@
+/* Chen-Yu Tsai's regdb certificate */
+0x30, 0x82, 0x02, 0xa7, 0x30, 0x82, 0x01, 0x8f,
+0x02, 0x14, 0x61, 0xc0, 0x38, 0x65, 0x1a, 0xab,
+0xdc, 0xf9, 0x4b, 0xd0, 0xac, 0x7f, 0xf0, 0x6c,
+0x72, 0x48, 0xdb, 0x18, 0xc6, 0x00, 0x30, 0x0d,
+0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d,
+0x01, 0x01, 0x0b, 0x05, 0x00, 0x30, 0x0f, 0x31,
+0x0d, 0x30, 0x0b, 0x06, 0x03, 0x55, 0x04, 0x03,
+0x0c, 0x04, 0x77, 0x65, 0x6e, 0x73, 0x30, 0x20,
+0x17, 0x0d, 0x32, 0x33, 0x31, 0x32, 0x30, 0x31,
+0x30, 0x37, 0x34, 0x31, 0x31, 0x34, 0x5a, 0x18,
+0x0f, 0x32, 0x31, 0x32, 0x33, 0x31, 0x31, 0x30,
+0x37, 0x30, 0x37, 0x34, 0x31, 0x31, 0x34, 0x5a,
+0x30, 0x0f, 0x31, 0x0d, 0x30, 0x0b, 0x06, 0x03,
+0x55, 0x04, 0x03, 0x0c, 0x04, 0x77, 0x65, 0x6e,
+0x73, 0x30, 0x82, 0x01, 0x22, 0x30, 0x0d, 0x06,
+0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01,
+0x01, 0x01, 0x05, 0x00, 0x03, 0x82, 0x01, 0x0f,
+0x00, 0x30, 0x82, 0x01, 0x0a, 0x02, 0x82, 0x01,
+0x01, 0x00, 0xa9, 0x7a, 0x2c, 0x78, 0x4d, 0xa7,
+0x19, 0x2d, 0x32, 0x52, 0xa0, 0x2e, 0x6c, 0xef,
+0x88, 0x7f, 0x15, 0xc5, 0xb6, 0x69, 0x54, 0x16,
+0x43, 0x14, 0x79, 0x53, 0xb7, 0xae, 0x88, 0xfe,
+0xc0, 0xb7, 0x5d, 0x47, 0x8e, 0x1a, 0xe1, 0xef,
+0xb3, 0x90, 0x86, 0xda, 0xd3, 0x64, 0x81, 0x1f,
+0xce, 0x5d, 0x9e, 0x4b, 0x6e, 0x58, 0x02, 0x3e,
+0xb2, 0x6f, 0x5e, 0x42, 0x47, 0x41, 0xf4, 0x2c,
+0xb8, 0xa8, 0xd4, 0xaa, 0xc0, 0x0e, 0xe6, 0x48,
+0xf0, 0xa8, 0xce, 0xcb, 0x08, 0xae, 0x37, 0xaf,
+0xf6, 0x40, 0x39, 0xcb, 0x55, 0x6f, 0x5b, 0x4f,
+0x85, 0x34, 0xe6, 0x69, 0x10, 0x50, 0x72, 0x5e,
+0x4e, 0x9d, 0x4c, 0xba, 0x38, 0x36, 0x0d, 0xce,
+0x73, 0x38, 0xd7, 0x27, 0x02, 0x2a, 0x79, 0x03,
+0xe1, 0xac, 0xcf, 0xb0, 0x27, 0x85, 0x86, 0x93,
+0x17, 0xab, 0xec, 0x42, 0x77, 0x37, 0x65, 0x8a,
+0x44, 0xcb, 0xd6, 0x42, 0x93, 0x92, 0x13, 0xe3,
+0x39, 0x45, 0xc5, 0x6e, 0x00, 0x4a, 0x7f, 0xcb,
+0x42, 0x17, 0x2b, 0x25, 0x8c, 0xb8, 0x17, 0x3b,
+0x15, 0x36, 0x59, 0xde, 0x42, 0xce, 0x21, 0xe6,
+0xb6, 0xc7, 0x6e, 0x5e, 0x26, 0x1f, 0xf7, 0x8a,
+0x57, 0x9e, 0xa5, 0x96, 0x72, 0xb7, 0x02, 0x32,
+0xeb, 0x07, 0x2b, 0x73, 0xe2, 0x4f, 0x66, 0x58,
+0x9a, 0xeb, 0x0f, 0x07, 0xb6, 0xab, 0x50, 0x8b,
+0xc3, 0x8f, 0x17, 0xfa, 0x0a, 0x99, 0xc2, 0x16,
+0x25, 0xbf, 0x2d, 0x6b, 0x1a, 0xaa, 0xe6, 0x3e,
+0x5f, 0xeb, 0x6d, 0x9b, 0x5d, 0x4d, 0x42, 0x83,
+0x2d, 0x39, 0xb8, 0xc9, 0xac, 0xdb, 0x3a, 0x91,
+0x50, 0xdf, 0xbb, 0xb1, 0x76, 0x6d, 0x15, 0x73,
+0xfd, 0xc6, 0xe6, 0x6b, 0x71, 0x9e, 0x67, 0x36,
+0x22, 0x83, 0x79, 0xb1, 0xd6, 0xb8, 0x84, 0x52,
+0xaf, 0x96, 0x5b, 0xc3, 0x63, 0x02, 0x4e, 0x78,
+0x70, 0x57, 0x02, 0x03, 0x01, 0x00, 0x01, 0x30,
+0x0d, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7,
+0x0d, 0x01, 0x01, 0x0b, 0x05, 0x00, 0x03, 0x82,
+0x01, 0x01, 0x00, 0x24, 0x28, 0xee, 0x22, 0x74,
+0x7f, 0x7c, 0xfa, 0x6c, 0x1f, 0xb3, 0x18, 0xd1,
+0xc2, 0x3d, 0x7d, 0x29, 0x42, 0x88, 0xad, 0x82,
+0xa5, 0xb1, 0x8a, 0x05, 0xd0, 0xec, 0x5c, 0x91,
+0x20, 0xf6, 0x82, 0xfd, 0xd5, 0x67, 0x60, 0x5f,
+0x31, 0xf5, 0xbd, 0x88, 0x91, 0x70, 0xbd, 0xb8,
+0xb9, 0x8c, 0x88, 0xfe, 0x53, 0xc9, 0x54, 0x9b,
+0x43, 0xc4, 0x7a, 0x43, 0x74, 0x6b, 0xdd, 0xb0,
+0xb1, 0x3b, 0x33, 0x45, 0x46, 0x78, 0xa3, 0x1c,
+0xef, 0x54, 0x68, 0xf7, 0x85, 0x9c, 0xe4, 0x51,
+0x6f, 0x06, 0xaf, 0x81, 0xdb, 0x2a, 0x7b, 0x7b,
+0x6f, 0xa8, 0x9c, 0x67, 0xd8, 0xcb, 0xc9, 0x91,
+0x40, 0x00, 0xae, 0xd9, 0xa1, 0x9f, 0xdd, 0xa6,
+0x43, 0x0e, 0x28, 0x7b, 0xaa, 0x1b, 0xe9, 0x84,
+0xdb, 0x76, 0x64, 0x42, 0x70, 0xc9, 0xc0, 0xeb,
+0xae, 0x84, 0x11, 0x16, 0x68, 0x4e, 0x84, 0x9e,
+0x7e, 0x92, 0x36, 0xee, 0x1c, 0x3b, 0x08, 0x63,
+0xeb, 0x79, 0x84, 0x15, 0x08, 0x9d, 0xaf, 0xc8,
+0x9a, 0xc7, 0x34, 0xd3, 0x94, 0x4b, 0xd1, 0x28,
+0x97, 0xbe, 0xd1, 0x45, 0x75, 0xdc, 0x35, 0x62,
+0xac, 0x1d, 0x1f, 0xb7, 0xb7, 0x15, 0x87, 0xc8,
+0x98, 0xc0, 0x24, 0x31, 0x56, 0x8d, 0xed, 0xdb,
+0x06, 0xc6, 0x46, 0xbf, 0x4b, 0x6d, 0xa6, 0xd5,
+0xab, 0xcc, 0x60, 0xfc, 0xe5, 0x37, 0xb6, 0x53,
+0x7d, 0x58, 0x95, 0xa9, 0x56, 0xc7, 0xf7, 0xee,
+0xc3, 0xa0, 0x76, 0xf7, 0x65, 0x4d, 0x53, 0xfa,
+0xff, 0x5f, 0x76, 0x33, 0x5a, 0x08, 0xfa, 0x86,
+0x92, 0x5a, 0x13, 0xfa, 0x1a, 0xfc, 0xf2, 0x1b,
+0x8c, 0x7f, 0x42, 0x6d, 0xb7, 0x7e, 0xb7, 0xb4,
+0xf0, 0xc7, 0x83, 0xbb, 0xa2, 0x81, 0x03, 0x2d,
+0xd4, 0x2a, 0x63, 0x3f, 0xf7, 0x31, 0x2e, 0x40,
+0x33, 0x5c, 0x46, 0xbc, 0x9b, 0xc1, 0x05, 0xa5,
+0x45, 0x4e, 0xc3

[PATCH 4.14 12/21] wifi: cfg80211: fix certs build to not depend on file order

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 3c2a8ebe3fe66a5f77d4c164a0bea8e2ff37b455 upstream.

The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.

Cc: stable@vger.kernel.org
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/certs/wens.hex |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/wireless/certs/wens.hex
+++ b/net/wireless/certs/wens.hex
@@ -84,4 +84,4 @@
 0xf0, 0xc7, 0x83, 0xbb, 0xa2, 0x81, 0x03, 0x2d,
 0xd4, 0x2a, 0x63, 0x3f, 0xf7, 0x31, 0x2e, 0x40,
 0x33, 0x5c, 0x46, 0xbc, 0x9b, 0xc1, 0x05, 0xa5,
-0x45, 0x4e, 0xc3
+0x45, 0x4e, 0xc3,

[PATCH 4.14 13/21] USB: serial: ftdi_sio: update Actisense PIDs constant names

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Glover <mark.glover@actisense.com>

commit 513d88a88e0203188a38f4647dd08170aebd85df upstream.

Update the constant names for unused USB PIDs (product identifiers) to
reflect the new products now using the PIDs.

Signed-off-by: Mark Glover <mark.glover@actisense.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |    6 +++---
 drivers/usb/serial/ftdi_sio_ids.h |    6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1006,9 +1006,9 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
-	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
-	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
-	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_UID_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_USA_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGX_PID) },
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1561,9 +1561,9 @@
 #define ACTISENSE_USG_PID		0xD9A9 /* USG USB Serial Adapter */
 #define ACTISENSE_NGT_PID		0xD9AA /* NGT NMEA2000 Interface */
 #define ACTISENSE_NGW_PID		0xD9AB /* NGW NMEA2000 Gateway */
-#define ACTISENSE_D9AC_PID		0xD9AC /* Actisense Reserved */
-#define ACTISENSE_D9AD_PID		0xD9AD /* Actisense Reserved */
-#define ACTISENSE_D9AE_PID		0xD9AE /* Actisense Reserved */
+#define ACTISENSE_UID_PID		0xD9AC /* USB Isolating Device */
+#define ACTISENSE_USA_PID		0xD9AD /* USB to Serial Adapter */
+#define ACTISENSE_NGX_PID		0xD9AE /* NGX NMEA2000 Gateway */
 #define ACTISENSE_D9AF_PID		0xD9AF /* Actisense Reserved */
 #define CHETCO_SEAGAUGE_PID		0xA548 /* SeaGauge USB Adapter */
 #define CHETCO_SEASWITCH_PID		0xA549 /* SeaSwitch USB Adapter */

[PATCH 4.14 14/21] USB: serial: option: add Quectel EG912Y module support

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alper Ak <alperyasinak1@gmail.com>

commit 6d79d9434c69bb8ffa8a631050eb0ad6b83d3e90 upstream.

Add Quectel EG912Y "DIAG, AT, MODEM"

0x6001: ECM / RNDIS + DIAG + AT + MODEM

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6001 Rev= 3.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=0000
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -275,6 +275,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
+#define QUECTEL_PRODUCT_EG912Y			0x6001
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200A			0x6005
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
@@ -1247,6 +1248,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },

[PATCH 4.14 15/21] USB: serial: option: add Foxconn T99W265 with new baseline

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Slark Xiao <slark_xiao@163.com>

commit 13fde9ac23ca8c6d1ac13cc9eefe1f1ac3ee30a4 upstream.

This ID was added based on latest SDX12 code base line, and we
made some changes with previous 0489:e0db.

Test evidence as below:
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  2
P:  Vendor=0489 ProdID=e0da Rev=05.04
S:  Manufacturer=Qualcomm
S:  Product=Qualcomm Snapdragon X12
S:  SerialNumber=2bda65fb
C:  #Ifs= 6 Cfg#= 2 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

0&1: MBIM, 2: Modem, 3:GNSS, 4:Diag, 5:ADB

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2246,6 +2246,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0da, 0xff),                     /* Foxconn T99W265 MBIM variant */
+	  .driver_info = RSVD(3) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),			/* Foxconn T99W368 MBIM */

[PATCH 4.14 16/21] USB: serial: option: add Quectel RM500Q R13 firmware support

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Reinhard Speyerer <rspmn@arcor.de>

commit 06f22cd6635bdae7d73566fca9879b2026a08e00 upstream.

Add support for Quectel RM500Q R13 firmware which uses Prot=40 for the
NMEA port:

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  8 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2c7c ProdID=0800 Rev= 4.14
S:  Manufacturer=Quectel
S:  Product=RM500Q-AE
S:  SerialNumber=xxxxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1236,6 +1236,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
 	  .driver_info = RSVD(3) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
 	  .driver_info = ZLP },

[PATCH 4.14 17/21] Bluetooth: hci_event: Fix not checking if HCI_OP_INQUIRY has been sent

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit 99e67d46e5ff3c7c901af6009edec72d3d363be8 upstream.

Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.

Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/hci_event.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1471,7 +1471,8 @@ static void hci_cs_inquiry(struct hci_de
 		return;
 	}
 
-	set_bit(HCI_INQUIRY, &hdev->flags);
+	if (hci_sent_cmd_data(hdev, HCI_OP_INQUIRY))
+		set_bit(HCI_INQUIRY, &hdev->flags);
 }
 
 static void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)

[PATCH 4.14 18/21] net: 9p: avoid freeing uninit memory in p9pdu_vreadf

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fedor Pchelkin <pchelkin@ispras.ru>

commit ff49bf1867578f23a5ffdd38f927f6e1e16796c4 upstream.

If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.

Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.

Found by Linux Verification Center (linuxtesting.org).

Fixes: ace51c4dd2f9 ("9p: add new protocol support code")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/9p/protocol.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -243,6 +243,8 @@ p9pdu_vreadf(struct p9_fcall *pdu, int p
 				uint16_t *nwname = va_arg(ap, uint16_t *);
 				char ***wnames = va_arg(ap, char ***);
 
+				*wnames = NULL;
+
 				errcode = p9pdu_readf(pdu, proto_version,
 								"w", nwname);
 				if (!errcode) {
@@ -251,6 +253,8 @@ p9pdu_vreadf(struct p9_fcall *pdu, int p
 						    GFP_NOFS);
 					if (!*wnames)
 						errcode = -ENOMEM;
+					else
+						(*wnames)[0] = NULL;
 				}
 
 				if (!errcode) {
@@ -262,8 +266,10 @@ p9pdu_vreadf(struct p9_fcall *pdu, int p
 								proto_version,
 								"s",
 								&(*wnames)[i]);
-						if (errcode)
+						if (errcode) {
+							(*wnames)[i] = NULL;
 							break;
+						}
 					}
 				}
 
@@ -271,11 +277,14 @@ p9pdu_vreadf(struct p9_fcall *pdu, int p
 					if (*wnames) {
 						int i;
 
-						for (i = 0; i < *nwname; i++)
+						for (i = 0; i < *nwname; i++) {
+							if (!(*wnames)[i])
+								break;
 							kfree((*wnames)[i]);
+						}
+						kfree(*wnames);
+						*wnames = NULL;
 					}
-					kfree(*wnames);
-					*wnames = NULL;
 				}
 			}
 			break;

[PATCH 4.14 19/21] net: rfkill: gpio: set GPIO direction

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rouven Czerwinski <r.czerwinski@pengutronix.de>

commit 23484d817082c3005252d8edfc8292c8a1006b5b upstream.

Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.

This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.

Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rfkill/rfkill-gpio.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -129,6 +129,14 @@ static int rfkill_gpio_probe(struct plat
 		return -EINVAL;
 	}
 
+	ret = gpiod_direction_output(rfkill->reset_gpio, true);
+	if (ret)
+		return ret;
+
+	ret = gpiod_direction_output(rfkill->shutdown_gpio, true);
+	if (ret)
+		return ret;
+
 	rfkill->rfkill_dev = rfkill_alloc(rfkill->name, &pdev->dev,
 					  rfkill->type, &rfkill_gpio_ops,
 					  rfkill);

[PATCH 4.14 20/21] dm-integrity: dont modify bios immutable bio_vec in integrity_metadata()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit b86f4b790c998afdbc88fe1aa55cfe89c4068726 upstream.

__bio_for_each_segment assumes that the first struct bio_vec argument
doesn't change - it calls "bio_advance_iter_single((bio), &(iter),
(bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity
code changes the bio_vec with "bv.bv_len -= pos". When this code path
is taken, the iterator would be out of sync and dm-integrity would
report errors. This happens if the machine is out of memory and
"kmalloc" fails.

Fix this bug by making a copy of "bv" and changing the copy instead.

Fixes: 7eada909bfd7 ("dm: add integrity target")
Cc: stable@vger.kernel.org	# v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-integrity.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -1257,11 +1257,12 @@ static void integrity_metadata(struct wo
 			checksums = checksums_onstack;
 
 		__bio_for_each_segment(bv, bio, iter, dio->orig_bi_iter) {
+			struct bio_vec bv_copy = bv;
 			unsigned pos;
 			char *mem, *checksums_ptr;
 
 again:
-			mem = (char *)kmap_atomic(bv.bv_page) + bv.bv_offset;
+			mem = (char *)kmap_atomic(bv_copy.bv_page) + bv_copy.bv_offset;
 			pos = 0;
 			checksums_ptr = checksums;
 			do {
@@ -1270,7 +1271,7 @@ again:
 				sectors_to_process -= ic->sectors_per_block;
 				pos += ic->sectors_per_block << SECTOR_SHIFT;
 				sector += ic->sectors_per_block;
-			} while (pos < bv.bv_len && sectors_to_process && checksums != checksums_onstack);
+			} while (pos < bv_copy.bv_len && sectors_to_process && checksums != checksums_onstack);
 			kunmap_atomic(mem);
 
 			r = dm_integrity_rw_tag(ic, checksums, &dio->metadata_block, &dio->metadata_offset,
@@ -1290,9 +1291,9 @@ again:
 			if (!sectors_to_process)
 				break;
 
-			if (unlikely(pos < bv.bv_len)) {
-				bv.bv_offset += pos;
-				bv.bv_len -= pos;
+			if (unlikely(pos < bv_copy.bv_len)) {
+				bv_copy.bv_offset += pos;
+				bv_copy.bv_len -= pos;
 				goto again;
 			}
 		}

[PATCH 4.14 21/21] block: Dont invalidate pagecache for invalid falloc modes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarthak Kukreti <sarthakkukreti@chromium.org>

commit 1364a3c391aedfeb32aa025303ead3d7c91cdf9d upstream.

Only call truncate_bdev_range() if the fallocate mode is supported. This
fixes a bug where data in the pagecache could be invalidated if the
fallocate() was called on the block device with an invalid mode.

Fixes: 25f4c41415e5 ("block: implement (some of) fallocate for block devices")
Cc: stable@vger.kernel.org
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Fixes: line?  I've never seen those wrapped.
Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/block_dev.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -2033,21 +2033,26 @@ static long blkdev_fallocate(struct file
 	if ((start | len) & (bdev_logical_block_size(bdev) - 1))
 		return -EINVAL;
 
-	/* Invalidate the page cache, including dirty pages. */
+	/*
+	 * Invalidate the page cache, including dirty pages, for valid
+	 * de-allocate mode calls to fallocate().
+	 */
 	mapping = bdev->bd_inode->i_mapping;
-	truncate_inode_pages_range(mapping, start, end);
 
 	switch (mode) {
 	case FALLOC_FL_ZERO_RANGE:
 	case FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE:
+		truncate_inode_pages_range(mapping, start, end);
 		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
 					    GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
 		break;
 	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE:
+		truncate_inode_pages_range(mapping, start, end);
 		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
 					     GFP_KERNEL, BLKDEV_ZERO_NOFALLBACK);
 		break;
 	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_NO_HIDE_STALE:
+		truncate_inode_pages_range(mapping, start, end);
 		error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
 					     GFP_KERNEL, 0);
 		break;

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Jon Hunter]

Hi Greg,

On 05/01/2024 14:38, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.335 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jan 2024 14:38:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.335-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:

...


> Alexis Lothoré <alexis.lothore@bootlin.com>
>      pinctrl: at91-pio4: use dedicated lock class for IRQ


I am seeing the following build error for ARM ...

drivers/pinctrl/pinctrl-at91-pio4.c: In function ‘atmel_pinctrl_probe’:
drivers/pinctrl/pinctrl-at91-pio4.c:1054:3: error: too many arguments to function ‘irq_set_lockdep_class’
    irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key);
    ^~~~~~~~~~~~~~~~~~~~~
In file included from include/linux/irq.h:517:0,
                  from include/linux/gpio/driver.h:7,
                  from drivers/pinctrl/pinctrl-at91-pio4.c:18:
include/linux/irqdesc.h:250:1: note: declared here
  irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
  ^~~~~~~~~~~~~~~~~~~~~

I am guessing it is the above commit.

Jon
-- 
nvpublic

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Greg Kroah-Hartman]

On Fri, Jan 05, 2024 at 04:23:00PM +0000, Jon Hunter wrote:
> Hi Greg,
> 
> On 05/01/2024 14:38, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.335 release.
> > There are 21 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun, 07 Jan 2024 14:38:02 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.335-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> > -------------
> > Pseudo-Shortlog of commits:
> 
> ...
> 
> 
> > Alexis Lothoré <alexis.lothore@bootlin.com>
> >      pinctrl: at91-pio4: use dedicated lock class for IRQ
> 
> 
> I am seeing the following build error for ARM ...
> 
> drivers/pinctrl/pinctrl-at91-pio4.c: In function ‘atmel_pinctrl_probe’:
> drivers/pinctrl/pinctrl-at91-pio4.c:1054:3: error: too many arguments to function ‘irq_set_lockdep_class’
>    irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key);
>    ^~~~~~~~~~~~~~~~~~~~~
> In file included from include/linux/irq.h:517:0,
>                  from include/linux/gpio/driver.h:7,
>                  from drivers/pinctrl/pinctrl-at91-pio4.c:18:
> include/linux/irqdesc.h:250:1: note: declared here
>  irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
>  ^~~~~~~~~~~~~~~~~~~~~
> 
> I am guessing it is the above commit.

Thanks, now dropped.

greg k-h

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Daniel Díaz]

Hello!

On 05/01/24 8:38 a. m., Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.335 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jan 2024 14:38:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.335-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

We are seeing build problems on Arm32 and Arm64. On Arm32, for the following configurations:

* clang-17-keystone_defconfig
* clang-17-lkftconfig
* clang-17-mini2440_defconfig
* clang-17-sama5_defconfig
* gcc-8-defconfig
* gcc-8-sama5_defconfig
* gcc-12-defconfig
* gcc-12-lkftconfig
* gcc-12-lkftconfig-debug
* gcc-12-lkftconfig-debug-kmemleak
* gcc-12-lkftconfig-kasan
* gcc-12-lkftconfig-kselftest-kernel
* gcc-12-lkftconfig-kunit
* gcc-12-lkftconfig-libgpiod
* gcc-12-lkftconfig-rcutorture
* gcc-12-sama5_defconfig

Failure looks like this:

-----8<-----
   /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
   /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c:1054:3: error: too many arguments to function 'irq_set_lockdep_class'
      irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key);
      ^~~~~~~~~~~~~~~~~~~~~
   In file included from /builds/linux/include/linux/irq.h:517,
                    from /builds/linux/include/linux/gpio/driver.h:7,
                    from /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c:18:
   /builds/linux/include/linux/irqdesc.h:250:1: note: declared here
    irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
    ^~~~~~~~~~~~~~~~~~~~~
   make[3]: *** [/builds/linux/scripts/Makefile.build:330: drivers/pinctrl/pinctrl-at91-pio4.o] Error 1
----->8-----

Bisection points to:

   commit 6c47537ba008b3affe99360f65592ff5b797818f
   Author: Alexis Lothoré <alexis.lothore@bootlin.com>
   Date:   Fri Dec 15 22:34:24 2023 +0100

       pinctrl: at91-pio4: use dedicated lock class for IRQ
       
       [ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]

Reproducer:

   tuxmake --runtime podman --target-arch arm --toolchain clang-17 --kconfig defconfig LLVM_IAS=0

Then on Arm64 with Clang 17:

-----8<-----
   /builds/linux/net/8021q/vlan_core.c:332:39: error: incompatible integer to pointer conversion passing '__be16' (aka 'unsigned short') to parameter of type 'const struct vlan_vi
   d_info *' [-Wint-conversion]
     332 |                 if (!vlan_hw_filter_capable(by_dev, vid_info->proto))
         |                                                     ^~~~~~~~~~~~~~~
   /builds/linux/net/8021q/vlan_core.c:169:38: note: passing argument to parameter 'vid_info' here
     169 |                                      const struct vlan_vid_info *vid_info)
         |                                                                  ^
   /builds/linux/net/8021q/vlan_core.c:344:39: error: incompatible integer to pointer conversion passing '__be16' (aka 'unsigned short') to parameter of type 'const struct vlan_vi
   d_info *' [-Wint-conversion]
     344 |                 if (!vlan_hw_filter_capable(by_dev, vid_info->proto))
         |                                                     ^~~~~~~~~~~~~~~
   /builds/linux/net/8021q/vlan_core.c:169:38: note: passing argument to parameter 'vid_info' here
     169 |                                      const struct vlan_vid_info *vid_info)
         |                                                                  ^
   /builds/linux/net/8021q/vlan_core.c:366:39: error: incompatible integer to pointer conversion passing '__be16' (aka 'unsigned short') to parameter of type 'const struct vlan_vid_info *' [-Wint-conversion]
     366 |                 if (!vlan_hw_filter_capable(by_dev, vid_info->proto))
         |                                                     ^~~~~~~~~~~~~~~
   /builds/linux/net/8021q/vlan_core.c:169:38: note: passing argument to parameter 'vid_info' here
     169 |                                      const struct vlan_vid_info *vid_info)
         |                                                                  ^
   3 errors generated.
   make[3]: *** [/builds/linux/scripts/Makefile.build:329: net/8021q/vlan_core.o] Error 1
----->8-----

Bisection in this case points to:

   commit f33474044777425b3578d4e8b22a003f034ae214
   Author: Liu Jian <liujian56@huawei.com>
   Date:   Sat Dec 16 15:52:18 2023 +0800

       net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
       
       [ Upstream commit 01a564bab4876007ce35f312e16797dfe40e4823 ]

Reproducer:

   tuxmake --runtime podman --target-arch arm64 --toolchain clang-17 --kconfig defconfig LD=ld.lld LLVM_IAS=0

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>


Greetings!

Daniel Díaz
daniel.diaz@linaro.org

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Alexis Lothoré]

Hello,

On 1/5/24 18:13, Daniel Díaz wrote:
> Hello!
> 
> On 05/01/24 8:38 a. m., Greg Kroah-Hartman wrote:

[...]

> Failure looks like this:
> 
> -----8<-----
>   /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c: In function
> 'atmel_pinctrl_probe':
>   /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c:1054:3: error: too many
> arguments to function 'irq_set_lockdep_class'
>      irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key);
>      ^~~~~~~~~~~~~~~~~~~~~
>   In file included from /builds/linux/include/linux/irq.h:517,
>                    from /builds/linux/include/linux/gpio/driver.h:7,
>                    from /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c:18:
>   /builds/linux/include/linux/irqdesc.h:250:1: note: declared here
>    irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
>    ^~~~~~~~~~~~~~~~~~~~~
>   make[3]: *** [/builds/linux/scripts/Makefile.build:330:
> drivers/pinctrl/pinctrl-at91-pio4.o] Error 1
> ----->8-----
> 
> Bisection points to:
> 
>   commit 6c47537ba008b3affe99360f65592ff5b797818f
>   Author: Alexis Lothoré <alexis.lothore@bootlin.com>
>   Date:   Fri Dec 15 22:34:24 2023 +0100
> 
>       pinctrl: at91-pio4: use dedicated lock class for IRQ
>             [ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]

This fails because linux-4.14.y is older than 39c3fd58952d: kernel/irq: Extend
lockdep class for request mutex, which updates irq_set_lockdep_class API.

Looking at irq_set_lockdep_class update patch, what appears to be a simple fix is
to simply remove the last parameter from irq_set_lockdep_class call in
pinctrl-at91-pio4.c, but I am not even sure if the fix remains legitimate in this
case (ie if the corresponding lockdep splat reappears), and I do not have access
to corresponding hardware before the deadline, so if that's not already the plan,
I suggest to drop this from 4.14 branch.

Alexis

-- 
Alexis Lothoré, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Greg Kroah-Hartman]

On Fri, Jan 05, 2024 at 09:39:58PM +0100, Alexis Lothoré wrote:
> Hello,
> 
> On 1/5/24 18:13, Daniel Díaz wrote:
> > Hello!
> > 
> > On 05/01/24 8:38 a. m., Greg Kroah-Hartman wrote:
> 
> [...]
> 
> > Failure looks like this:
> > 
> > -----8<-----
> >   /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c: In function
> > 'atmel_pinctrl_probe':
> >   /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c:1054:3: error: too many
> > arguments to function 'irq_set_lockdep_class'
> >      irq_set_lockdep_class(irq, &atmel_lock_key, &atmel_request_key);
> >      ^~~~~~~~~~~~~~~~~~~~~
> >   In file included from /builds/linux/include/linux/irq.h:517,
> >                    from /builds/linux/include/linux/gpio/driver.h:7,
> >                    from /builds/linux/drivers/pinctrl/pinctrl-at91-pio4.c:18:
> >   /builds/linux/include/linux/irqdesc.h:250:1: note: declared here
> >    irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
> >    ^~~~~~~~~~~~~~~~~~~~~
> >   make[3]: *** [/builds/linux/scripts/Makefile.build:330:
> > drivers/pinctrl/pinctrl-at91-pio4.o] Error 1
> > ----->8-----
> > 
> > Bisection points to:
> > 
> >   commit 6c47537ba008b3affe99360f65592ff5b797818f
> >   Author: Alexis Lothoré <alexis.lothore@bootlin.com>
> >   Date:   Fri Dec 15 22:34:24 2023 +0100
> > 
> >       pinctrl: at91-pio4: use dedicated lock class for IRQ
> >             [ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]
> 
> This fails because linux-4.14.y is older than 39c3fd58952d: kernel/irq: Extend
> lockdep class for request mutex, which updates irq_set_lockdep_class API.
> 
> Looking at irq_set_lockdep_class update patch, what appears to be a simple fix is
> to simply remove the last parameter from irq_set_lockdep_class call in
> pinctrl-at91-pio4.c, but I am not even sure if the fix remains legitimate in this
> case (ie if the corresponding lockdep splat reappears), and I do not have access
> to corresponding hardware before the deadline, so if that's not already the plan,
> I suggest to drop this from 4.14 branch.

Now dropped, thanks.

greg k-h

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 661 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.14.335 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.14.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.14 00/21] 4.14.335-rc1 review

[Harshit Mogalapalli]

Hi Greg,

On 05/01/24 8:08 pm, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.335 release.
> There are 21 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jan 2024 14:38:02 +0000.
> Anything received after that time might be too late.
> 

No problems seen on x86_64 and aarch64 with our testing.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit

> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.335-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
>  fix a memleak in atl1e_setup_ring_resources
> 
> Eric Dumazet <edumazet@google.com>
>      net: sched: ife: fix potential use-after-free
> 
> Johannes Berg <johannes.berg@intel.com>
>      wifi: mac80211: mesh_plink: fix matches_local logic
> 
> Heiko Carstens <hca@linux.ibm.com>
>      s390/vx: fix save/restore of fpu kernel context
> 
> Kunwu Chan <chentao@kylinos.cn>
>      ARM: OMAP2+: Fix null pointer dereference and memory leak in omap_soc_device_init
>