[PATCH 5.10 35/43] mmc: sdhci-sprd: Fix eMMC init failure after hw reset

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wenchao Chen <wenchao.chen@unisoc.com>

commit 8abf77c88929b6d20fa4f9928b18d6448d64e293 upstream.

Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-sprd.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -224,15 +224,19 @@ static inline void _sdhci_sprd_set_clock
 	div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8);
 	sdhci_enable_clk(host, div);
 
+	val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
+	mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
 	/* Enable CLK_AUTO when the clock is greater than 400K. */
 	if (clk > 400000) {
-		val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
-		mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |
-			SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
 		if (mask != (val & mask)) {
 			val |= mask;
 			sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
 		}
+	} else {
+		if (val & mask) {
+			val &= ~mask;
+			sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
+		}
 	}
 }