[PATCH 6.6.y] serial: core: set missing supported flag for RX during TX GPIO

[Lino Sanfilippo <l.sanfilippo@kunbus.com>]

If the RS485 feature RX-during-TX is supported by means of a GPIO set the
according supported flag. Otherwise setting this feature from userspace may
not be possible, since in uart_sanitize_serial_rs485() the passed RS485
configuration is matched against the supported features and unsupported
settings are thereby removed and thus take no effect.

Cc:  <stable@vger.kernel.org>
Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-3-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 1a33e33ca0e80d485458410f149265cdc0178cfa)
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
 drivers/tty/serial/serial_core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f912f8bf1e63..4a783d4f28f3 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -3625,6 +3625,8 @@ int uart_get_rs485_mode(struct uart_port *port)
 		port->rs485_rx_during_tx_gpio = NULL;
 		return dev_err_probe(dev, ret, "Cannot get rs485-rx-during-tx-gpios\n");
 	}
+	if (port->rs485_rx_during_tx_gpio)
+		port->rs485_supported.flags |= SER_RS485_RX_DURING_TX;
 
 	return 0;
 }
-- 
2.43.0