From: <gregkh@linuxfoundation.org>
To: hvilleneuve@dimonoff.com,andy.shevchenko@gmail.com,gregkh@linuxfoundation.org,stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] serial: sc16is7xx: remove obsolete loop in" failed to apply to 4.19-stable tree
Date: Fri, 26 Jan 2024 15:48:11 -0800 [thread overview]
Message-ID: <2024012611-quickness-simmering-9ae2@gregkh> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x ed647256e8f226241ecff7baaecdb8632ffc7ec1
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024012611-quickness-simmering-9ae2@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
ed647256e8f2 ("serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()")
4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels")
e045e18dbf3e ("Merge 6.7-rc5 into tty-next")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ed647256e8f226241ecff7baaecdb8632ffc7ec1 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Date: Thu, 21 Dec 2023 18:18:11 -0500
Subject: [PATCH] serial: sc16is7xx: remove obsolete loop in
sc16is7xx_port_irq()
Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed
sc16is7xx_port_irq() from looping multiple times when there was still
interrupts to serve. It simply changed the do {} while(1) loop to a
do {} while(0) loop, which makes the loop itself now obsolete.
Clean the code by removing this obsolete do {} while(0) loop.
Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall")
Cc: <stable@vger.kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index ced2446909a2..44a11c89c949 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one)
static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
{
bool rc = true;
+ unsigned int iir, rxlen;
struct uart_port *port = &s->p[portno].port;
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
mutex_lock(&one->efr_lock);
- do {
- unsigned int iir, rxlen;
+ iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
+ if (iir & SC16IS7XX_IIR_NO_INT_BIT) {
+ rc = false;
+ goto out_port_irq;
+ }
- iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
- if (iir & SC16IS7XX_IIR_NO_INT_BIT) {
- rc = false;
- goto out_port_irq;
- }
+ iir &= SC16IS7XX_IIR_ID_MASK;
- iir &= SC16IS7XX_IIR_ID_MASK;
-
- switch (iir) {
- case SC16IS7XX_IIR_RDI_SRC:
- case SC16IS7XX_IIR_RLSE_SRC:
- case SC16IS7XX_IIR_RTOI_SRC:
- case SC16IS7XX_IIR_XOFFI_SRC:
- rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
-
- /*
- * There is a silicon bug that makes the chip report a
- * time-out interrupt but no data in the FIFO. This is
- * described in errata section 18.1.4.
- *
- * When this happens, read one byte from the FIFO to
- * clear the interrupt.
- */
- if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
- rxlen = 1;
-
- if (rxlen)
- sc16is7xx_handle_rx(port, rxlen, iir);
- break;
+ switch (iir) {
+ case SC16IS7XX_IIR_RDI_SRC:
+ case SC16IS7XX_IIR_RLSE_SRC:
+ case SC16IS7XX_IIR_RTOI_SRC:
+ case SC16IS7XX_IIR_XOFFI_SRC:
+ rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+
+ /*
+ * There is a silicon bug that makes the chip report a
+ * time-out interrupt but no data in the FIFO. This is
+ * described in errata section 18.1.4.
+ *
+ * When this happens, read one byte from the FIFO to
+ * clear the interrupt.
+ */
+ if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen)
+ rxlen = 1;
+
+ if (rxlen)
+ sc16is7xx_handle_rx(port, rxlen, iir);
+ break;
/* CTSRTS interrupt comes only when CTS goes inactive */
- case SC16IS7XX_IIR_CTSRTS_SRC:
- case SC16IS7XX_IIR_MSI_SRC:
- sc16is7xx_update_mlines(one);
- break;
- case SC16IS7XX_IIR_THRI_SRC:
- sc16is7xx_handle_tx(port);
- break;
- default:
- dev_err_ratelimited(port->dev,
- "ttySC%i: Unexpected interrupt: %x",
- port->line, iir);
- break;
- }
- } while (0);
+ case SC16IS7XX_IIR_CTSRTS_SRC:
+ case SC16IS7XX_IIR_MSI_SRC:
+ sc16is7xx_update_mlines(one);
+ break;
+ case SC16IS7XX_IIR_THRI_SRC:
+ sc16is7xx_handle_tx(port);
+ break;
+ default:
+ dev_err_ratelimited(port->dev,
+ "ttySC%i: Unexpected interrupt: %x",
+ port->line, iir);
+ break;
+ }
out_port_irq:
mutex_unlock(&one->efr_lock);
reply other threads:[~2024-01-26 23:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024012611-quickness-simmering-9ae2@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=andy.shevchenko@gmail.com \
--cc=hvilleneuve@dimonoff.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox