FAILED: patch "[PATCH] ARM: dts: qcom: sdx55: fix USB wakeup interrupt types" failed to apply to 6.1-stable tree

FAILED: patch "[PATCH] ARM: dts: qcom: sdx55: fix USB wakeup interrupt types" failed to apply to 6.1-stable tree

[gregkh]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x d0ec3c4c11c3b30e1f2d344973b2a7bf0f986734
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024012645-attic-doorstop-7a33@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

d0ec3c4c11c3 ("ARM: dts: qcom: sdx55: fix USB wakeup interrupt types")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From d0ec3c4c11c3b30e1f2d344973b2a7bf0f986734 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan+linaro@kernel.org>
Date: Mon, 20 Nov 2023 17:43:21 +0100
Subject: [PATCH] ARM: dts: qcom: sdx55: fix USB wakeup interrupt types

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org      # 5.12
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index f604a27f50be..0fe220408888 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -582,8 +582,8 @@ usb: usb@a6f8800 {
 
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 158 IRQ_TYPE_EDGE_BOTH>,
+				     <GIC_SPI 157 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";