[PATCH 5.10 27/42] dmaengine: fsl-qdma: init irq after reg initialization

Greg Kroah-Hartman
2024-03-04T21:35:15Z

From: Curtis Klein <curtis.klein@hpe.com>

commit 87a39071e0b639f45e05d296cc0538eef44ec0bd upstream.

Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:

Call trace:
fsl_qdma_queue_handler+0xf8/0x3e8
__handle_irq_event_percpu+0x78/0x2b0
handle_irq_event_percpu+0x1c/0x68
handle_irq_event+0x44/0x78
handle_fasteoi_irq+0xc8/0x178
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x90/0x100
gic_handle_irq+0x5c/0xb8
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x40
__setup_irq+0x4bc/0x798
request_threaded_irq+0xd8/0x190
devm_request_threaded_irq+0x74/0xe8
fsl_qdma_probe+0x4d4/0xca8
platform_drv_probe+0x50/0xa0
really_probe+0xe0/0x3f8
driver_probe_device+0x64/0x130
device_driver_attach+0x6c/0x78
__driver_attach+0xbc/0x158
bus_for_each_dev+0x5c/0x98
driver_attach+0x20/0x28
bus_add_driver+0x158/0x220
driver_register+0x60/0x110
__platform_driver_register+0x44/0x50
fsl_qdma_driver_init+0x18/0x20
do_one_initcall+0x48/0x258
kernel_init_freeable+0x1a4/0x23c
kernel_init+0x10/0xf8
ret_from_fork+0x10/0x18

Cc: stable@vger.kernel.org
Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Signed-off-by: Yi Zhao <yi.zhao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240201220406.440145-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/fsl-qdma.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

--- a/drivers/dma/fsl-qdma.c
+++ b/drivers/dma/fsl-qdma.c
@@ -1203,10 +1203,6 @@ static int fsl_qdma_probe(struct platfor
if (!fsl_qdma->queue)
return -ENOMEM;

- ret = fsl_qdma_irq_init(pdev, fsl_qdma);
- if (ret)
- return ret;
-
fsl_qdma->irq_base = platform_get_irq_byname(pdev, "qdma-queue0");
if (fsl_qdma->irq_base < 0)
return fsl_qdma->irq_base;
@@ -1245,16 +1241,19 @@ static int fsl_qdma_probe(struct platfor

platform_set_drvdata(pdev, fsl_qdma);

- ret = dma_async_device_register(&fsl_qdma->dma_dev);
+ ret = fsl_qdma_reg_init(fsl_qdma);
if (ret) {
- dev_err(&pdev->dev,
- "Can't register NXP Layerscape qDMA engine.\n");
+ dev_err(&pdev->dev, "Can't Initialize the qDMA engine.\n");
return ret;
}

- ret = fsl_qdma_reg_init(fsl_qdma);
+ ret = fsl_qdma_irq_init(pdev, fsl_qdma);
+ if (ret)
+ return ret;
+
+ ret = dma_async_device_register(&fsl_qdma->dma_dev);
if (ret) {
- dev_err(&pdev->dev, "Can't Initialize the qDMA engine.\n");
+ dev_err(&pdev->dev, "Can't register NXP Layerscape qDMA engine.\n");
return ret;
}