[PATCH 6.8 266/715] arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC

Sasha Levin
2024-03-24T22:39:19Z

From: Marek Vasut <marex@denx.de>

[ Upstream commit 13ab6f174a6b577bd7d09124b47ec8ace2682e42 ]

The SPI NOR bus routing on this board cannot go above 50 MHz,
set the clock frequency to maximum of 40 MHz to be within a
safe margin. Remove the comment as well.

Fixes: 562d222f23f0 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 5828c9d7821de..b5ce7b14b5434 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -121,7 +121,7 @@ &ecspi1 {
flash@0 { /* W25Q128JVEI */
compatible = "jedec,spi-nor";
reg = <0>;
- spi-max-frequency = <100000000>; /* Up to 133 MHz */
+ spi-max-frequency = <40000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
};
--
2.43.0