[PATCH 6.7 176/713] arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals on BL OSM-S board

Sasha Levin
2024-03-24T22:50:15Z

From: Frieder Schrempf <frieder.schrempf@kontron.de>

[ Upstream commit c6d9b5672a0e2c4b1079a50d2fc8780c40cfd3eb ]

These signals are actively driven by the SoC or by the onboard
transceiver. There's no need to enable the internal pull resistors
and due to silicon errata ERR050080 let's disable the internal ones
to prevent any unwanted behavior in case they wear out.

Fixes: de9618e84f76 ("arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 0730c22e5b6b9..1dd03ef0a7835 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -313,19 +313,19 @@ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19

pinctrl_uart1: uart1grp {
fsl,pins = <
- MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140
- MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140
- MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140
- MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x0
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x0
+ MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x0
+ MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x0
>;
};

pinctrl_uart2: uart2grp {
fsl,pins = <
- MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140
- MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140
- MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
- MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x0
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x0
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x0
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x0
>;
};

--
2.43.0