From: <gregkh@linuxfoundation.org>
To: stern@rowland.harvard.edu,gregkh@linuxfoundation.org,stable@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] USB: core: Add hub_get() and hub_put() routines" failed to apply to 5.4-stable tree
Date: Mon, 01 Apr 2024 11:43:58 +0200 [thread overview]
Message-ID: <2024040158-stump-bucked-e91c@gregkh> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x ee113b860aa169e9a4d2c167c95d0f1961c6e1b8
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024040158-stump-bucked-e91c@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
ee113b860aa1 ("USB: core: Add hub_get() and hub_put() routines")
3a6bf4a08142 ("usb: core: hub: Create platform devices for onboard hubs in hub_probe()")
1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
95d23dc27bde ("usb, kcov: collect coverage from hub_event")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ee113b860aa169e9a4d2c167c95d0f1961c6e1b8 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 15 Mar 2024 13:04:50 -0400
Subject: [PATCH] USB: core: Add hub_get() and hub_put() routines
Create hub_get() and hub_put() routines to encapsulate the kref_get()
and kref_put() calls in hub.c. The new routines will be used by the
next patch in this series.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/604da420-ae8a-4a9e-91a4-2d511ff404fb@rowland.harvard.edu
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3ee8455585b6..9446660e231b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -130,7 +130,6 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
#define HUB_DEBOUNCE_STEP 25
#define HUB_DEBOUNCE_STABLE 100
-static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1,
@@ -720,14 +719,14 @@ static void kick_hub_wq(struct usb_hub *hub)
*/
intf = to_usb_interface(hub->intfdev);
usb_autopm_get_interface_no_resume(intf);
- kref_get(&hub->kref);
+ hub_get(hub);
if (queue_work(hub_wq, &hub->events))
return;
/* the work has already been scheduled */
usb_autopm_put_interface_async(intf);
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
}
void usb_kick_hub_wq(struct usb_device *hdev)
@@ -1095,7 +1094,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
goto init2;
goto init3;
}
- kref_get(&hub->kref);
+ hub_get(hub);
/* The superspeed hub except for root hub has to use Hub Depth
* value as an offset into the route string to locate the bits
@@ -1343,7 +1342,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
device_unlock(&hdev->dev);
}
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
}
/* Implement the continuations for the delays above */
@@ -1759,6 +1758,16 @@ static void hub_release(struct kref *kref)
kfree(hub);
}
+void hub_get(struct usb_hub *hub)
+{
+ kref_get(&hub->kref);
+}
+
+void hub_put(struct usb_hub *hub)
+{
+ kref_put(&hub->kref, hub_release);
+}
+
static unsigned highspeed_hubs;
static void hub_disconnect(struct usb_interface *intf)
@@ -1807,7 +1816,7 @@ static void hub_disconnect(struct usb_interface *intf)
onboard_hub_destroy_pdevs(&hub->onboard_hub_devs);
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
}
static bool hub_descriptor_is_sane(struct usb_host_interface *desc)
@@ -5934,7 +5943,7 @@ static void hub_event(struct work_struct *work)
/* Balance the stuff in kick_hub_wq() and allow autosuspend */
usb_autopm_put_interface(intf);
- kref_put(&hub->kref, hub_release);
+ hub_put(hub);
kcov_remote_stop();
}
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 43ce21c96a51..183b69dc2955 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -129,6 +129,8 @@ extern void usb_hub_remove_port_device(struct usb_hub *hub,
extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
int port1, bool set);
extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
+extern void hub_get(struct usb_hub *hub);
+extern void hub_put(struct usb_hub *hub);
extern int hub_port_debounce(struct usb_hub *hub, int port1,
bool must_be_connected);
extern int usb_clear_port_feature(struct usb_device *hdev,
reply other threads:[~2024-04-01 9:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024040158-stump-bucked-e91c@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=stable@kernel.org \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox