[PATCH 6.1 22/69] octeontx2-af: Fix NIX SQ mode and BP config

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geetha sowjanya <gakula@marvell.com>

[ Upstream commit faf23006185e777db18912685922c5ddb2df383f ]

NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by
moving the code out of platform check.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index bb99302eab67a..67080d5053e07 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4237,18 +4237,18 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 		 */
 		rvu_write64(rvu, blkaddr, NIX_AF_CFG,
 			    rvu_read64(rvu, blkaddr, NIX_AF_CFG) | 0x40ULL);
+	}
 
-		/* Set chan/link to backpressure TL3 instead of TL2 */
-		rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
+	/* Set chan/link to backpressure TL3 instead of TL2 */
+	rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01);
 
-		/* Disable SQ manager's sticky mode operation (set TM6 = 0)
-		 * This sticky mode is known to cause SQ stalls when multiple
-		 * SQs are mapped to same SMQ and transmitting pkts at a time.
-		 */
-		cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
-		cfg &= ~BIT_ULL(15);
-		rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
-	}
+	/* Disable SQ manager's sticky mode operation (set TM6 = 0)
+	 * This sticky mode is known to cause SQ stalls when multiple
+	 * SQs are mapped to same SMQ and transmitting pkts at a time.
+	 */
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS);
+	cfg &= ~BIT_ULL(15);
+	rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg);
 
 	ltdefs = rvu->kpu.lt_def;
 	/* Calibrate X2P bus to check if CGX/LBK links are fine */
-- 
2.43.0