From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Doug Berger <opendmb@gmail.com>,
Florian Fainelli <florian.fainelli@broadcom.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 5.10 05/15] net: bcmgenet: synchronize UMAC_CMD access
Date: Thu, 23 May 2024 15:12:47 +0200 [thread overview]
Message-ID: <20240523130326.658475819@linuxfoundation.org> (raw)
In-Reply-To: <20240523130326.451548488@linuxfoundation.org>
5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Doug Berger <opendmb@gmail.com>
commit 0d5e2a82232605b337972fb2c7d0cbc46898aca1 upstream.
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Cc: stable@vger.kernel.org
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 12 +++++++++++-
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 ++
drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 6 ++++++
drivers/net/ethernet/broadcom/genet/bcmmii.c | 2 ++
4 files changed, 21 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2420,14 +2420,18 @@ static void umac_enable_set(struct bcmge
{
u32 reg;
+ spin_lock_bh(&priv->reg_lock);
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
- if (reg & CMD_SW_RESET)
+ if (reg & CMD_SW_RESET) {
+ spin_unlock_bh(&priv->reg_lock);
return;
+ }
if (enable)
reg |= mask;
else
reg &= ~mask;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock_bh(&priv->reg_lock);
/* UniMAC stops on a packet boundary, wait for a full-size packet
* to be processed
@@ -2443,8 +2447,10 @@ static void reset_umac(struct bcmgenet_p
udelay(10);
/* issue soft reset and disable MAC while updating its registers */
+ spin_lock_bh(&priv->reg_lock);
bcmgenet_umac_writel(priv, CMD_SW_RESET, UMAC_CMD);
udelay(2);
+ spin_unlock_bh(&priv->reg_lock);
}
static void bcmgenet_intr_disable(struct bcmgenet_priv *priv)
@@ -3572,16 +3578,19 @@ static void bcmgenet_set_rx_mode(struct
* 3. The number of filters needed exceeds the number filters
* supported by the hardware.
*/
+ spin_lock(&priv->reg_lock);
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
if ((dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) ||
(nfilter > MAX_MDF_FILTER)) {
reg |= CMD_PROMISC;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock(&priv->reg_lock);
bcmgenet_umac_writel(priv, 0, UMAC_MDF_CTRL);
return;
} else {
reg &= ~CMD_PROMISC;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock(&priv->reg_lock);
}
/* update MDF filter */
@@ -3975,6 +3984,7 @@ static int bcmgenet_probe(struct platfor
goto err;
}
+ spin_lock_init(&priv->reg_lock);
spin_lock_init(&priv->lock);
SET_NETDEV_DEV(dev, &pdev->dev);
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -627,6 +627,8 @@ struct bcmgenet_rxnfc_rule {
/* device context */
struct bcmgenet_priv {
void __iomem *base;
+ /* reg_lock: lock to serialize access to shared registers */
+ spinlock_t reg_lock;
enum bcmgenet_version version;
struct net_device *dev;
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
@@ -134,6 +134,7 @@ int bcmgenet_wol_power_down_cfg(struct b
}
/* Can't suspend with WoL if MAC is still in reset */
+ spin_lock_bh(&priv->reg_lock);
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
if (reg & CMD_SW_RESET)
reg &= ~CMD_SW_RESET;
@@ -141,6 +142,7 @@ int bcmgenet_wol_power_down_cfg(struct b
/* disable RX */
reg &= ~CMD_RX_EN;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock_bh(&priv->reg_lock);
mdelay(10);
if (priv->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
@@ -186,6 +188,7 @@ int bcmgenet_wol_power_down_cfg(struct b
}
/* Enable CRC forward */
+ spin_lock_bh(&priv->reg_lock);
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
priv->crc_fwd_en = 1;
reg |= CMD_CRC_FWD;
@@ -193,6 +196,7 @@ int bcmgenet_wol_power_down_cfg(struct b
/* Receiver must be enabled for WOL MP detection */
reg |= CMD_RX_EN;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock_bh(&priv->reg_lock);
reg = UMAC_IRQ_MPD_R;
if (hfb_enable)
@@ -239,7 +243,9 @@ void bcmgenet_wol_power_up_cfg(struct bc
}
/* Disable CRC Forward */
+ spin_lock_bh(&priv->reg_lock);
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
reg &= ~CMD_CRC_FWD;
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock_bh(&priv->reg_lock);
}
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -91,6 +91,7 @@ void bcmgenet_mii_setup(struct net_devic
reg |= RGMII_LINK;
bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+ spin_lock_bh(&priv->reg_lock);
reg = bcmgenet_umac_readl(priv, UMAC_CMD);
reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) |
CMD_HD_EN |
@@ -103,6 +104,7 @@ void bcmgenet_mii_setup(struct net_devic
reg |= CMD_TX_EN | CMD_RX_EN;
}
bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+ spin_unlock_bh(&priv->reg_lock);
priv->eee.eee_active = phy_init_eee(phydev, 0) >= 0;
bcmgenet_eee_enable_set(dev,
next prev parent reply other threads:[~2024-05-23 13:16 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-23 13:12 [PATCH 5.10 00/15] 5.10.218-rc1 review Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 01/15] pinctrl: core: handle radix_tree_insert() errors in pinctrl_register_one_pin() Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 02/15] x86/xen: Drop USERGS_SYSRET64 paravirt call Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 03/15] Revert "selftests: mm: fix map_hugetlb failure on 64K page size systems" Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 04/15] net: bcmgenet: synchronize EXT_RGMII_OOB_CTRL access Greg Kroah-Hartman
2024-05-23 13:12 ` Greg Kroah-Hartman [this message]
2024-05-23 13:12 ` [PATCH 5.10 06/15] ima: fix deadlock when traversing "ima_default_rules" Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 07/15] netlink: annotate lockless accesses to nlk->max_recvmsg_len Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 08/15] KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 09/15] firmware: arm_scmi: Harden accesses to the reset domains Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 10/15] mptcp: ensure snd_nxt is properly initialized on connect Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 11/15] btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks() Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 12/15] drm/amdgpu: Fix possible NULL dereference in amdgpu_ras_query_error_status_helper() Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 13/15] usb: typec: ucsi: displayport: Fix potential deadlock Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 14/15] serial: kgdboc: Fix NMI-safety problems from keyboard reset code Greg Kroah-Hartman
2024-05-23 13:12 ` [PATCH 5.10 15/15] docs: kernel_include.py: Cope with docutils 0.21 Greg Kroah-Hartman
2024-05-23 18:20 ` [PATCH 5.10 00/15] 5.10.218-rc1 review Mark Brown
2024-05-23 18:35 ` Florian Fainelli
2024-05-24 0:55 ` Dominique Martinet
2024-05-24 11:22 ` Pavel Machek
2024-05-24 11:42 ` Anders Roxell
2024-05-24 15:20 ` Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240523130326.658475819@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=florian.fainelli@broadcom.com \
--cc=opendmb@gmail.com \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox