[PATCH 6.1 218/473] media: dt-bindings: ovti,ov2680: Fix the power supply names

Greg Kroah-Hartman
2024-06-06T14:15:36Z

From: Fabio Estevam <festevam@denx.de>

[ Upstream commit e2f6ea61b6f3e4ebbb7dff857eea6220c18cd17b ]

The original .txt bindings had the OV2680 power supply names correct,
but the transition from .txt to yaml spelled them incorrectly.

Fix the OV2680 power supply names as the original .txt bindings
as these are the names used by the OV2680 driver and in devicetree.

Fixes: 57226cd8c8bf ("media: dt-bindings: ov2680: convert bindings to yaml")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../bindings/media/i2c/ovti,ov2680.yaml | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddcb..c87677f5e2a25 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,15 +37,15 @@ properties:
active low.
maxItems: 1

- dovdd-supply:
+ DOVDD-supply:
description:
Definition of the regulator used as interface power supply.

- avdd-supply:
+ AVDD-supply:
description:
Definition of the regulator used as analog power supply.

- dvdd-supply:
+ DVDD-supply:
description:
Definition of the regulator used as digital power supply.

@@ -59,9 +59,9 @@ required:
- reg
- clocks
- clock-names
- - dovdd-supply
- - avdd-supply
- - dvdd-supply
+ - DOVDD-supply
+ - AVDD-supply
+ - DVDD-supply
- reset-gpios
- port

@@ -82,9 +82,9 @@ examples:
clock-names = "xvclk";
reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;

- dovdd-supply = <&sw2_reg>;
- dvdd-supply = <&sw2_reg>;
- avdd-supply = <&reg_peri_3p15v>;
+ DOVDD-supply = <&sw2_reg>;
+ DVDD-supply = <&sw2_reg>;
+ AVDD-supply = <&reg_peri_3p15v>;

port {
ov2680_to_mipi: endpoint {
--
2.43.0