FAILED: patch "[PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable()" failed to apply to 6.1-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 0c50b7fcf2773b4853e83fc15aba1a196ba95966
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024061237-ethically-ethically-19bc@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

0c50b7fcf277 ("firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0c50b7fcf2773b4853e83fc15aba1a196ba95966 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <j4g8y7@gmail.com>
Date: Mon, 4 Mar 2024 14:14:53 +0100
Subject: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable()
 fails

There are several functions which are calling qcom_scm_bw_enable()
then returns immediately if the call fails and leaves the clocks
enabled.

Change the code of these functions to disable clocks when the
qcom_scm_bw_enable() call fails. This also fixes a possible dma
buffer leak in the qcom_scm_pas_init_image() function.

Compile tested only due to lack of hardware with interconnect
support.

Cc: stable@vger.kernel.org
Fixes: 65b7ebda5028 ("firmware: qcom_scm: Add bw voting support to the SCM interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240304-qcom-scm-disable-clk-v1-1-b36e51577ca1@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 520de9b5633a..e8460626fb0c 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -569,13 +569,14 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
 
 	ret = qcom_scm_bw_enable();
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	desc.args[1] = mdata_phys;
 
 	ret = qcom_scm_call(__scm->dev, &desc, &res);
-
 	qcom_scm_bw_disable();
+
+disable_clk:
 	qcom_scm_clk_disable();
 
 out:
@@ -637,10 +638,12 @@ int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
 
 	ret = qcom_scm_bw_enable();
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	ret = qcom_scm_call(__scm->dev, &desc, &res);
 	qcom_scm_bw_disable();
+
+disable_clk:
 	qcom_scm_clk_disable();
 
 	return ret ? : res.result[0];
@@ -672,10 +675,12 @@ int qcom_scm_pas_auth_and_reset(u32 peripheral)
 
 	ret = qcom_scm_bw_enable();
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	ret = qcom_scm_call(__scm->dev, &desc, &res);
 	qcom_scm_bw_disable();
+
+disable_clk:
 	qcom_scm_clk_disable();
 
 	return ret ? : res.result[0];
@@ -706,11 +711,12 @@ int qcom_scm_pas_shutdown(u32 peripheral)
 
 	ret = qcom_scm_bw_enable();
 	if (ret)
-		return ret;
+		goto disable_clk;
 
 	ret = qcom_scm_call(__scm->dev, &desc, &res);
-
 	qcom_scm_bw_disable();
+
+disable_clk:
 	qcom_scm_clk_disable();
 
 	return ret ? : res.result[0];