[PATCH AUTOSEL 5.10 01/13] scsi: qedf: Set qed_slowpath_params to zero before use

[PATCH AUTOSEL 5.10 01/13] scsi: qedf: Set qed_slowpath_params to zero before use

[Sasha Levin]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ]

Zero qed_slowpath_params before use.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 6923862be3fbc..2536da96130ea 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -3453,6 +3453,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 	}
 
 	/* Start the Slowpath-process */
+	memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params));
 	slowpath_params.int_mode = QED_INT_MODE_MSIX;
 	slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER;
 	slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER;
-- 
2.43.0

[PATCH AUTOSEL 5.10 02/13] ACPI: EC: Abort address space access upon error

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit f6f172dc6a6d7775b2df6adfd1350700e9a847ec ]

When a multi-byte address space access is requested, acpi_ec_read()/
acpi_ec_write() is being called multiple times.

Abort such operations if a single call to acpi_ec_read() /
acpi_ec_write() fails, as the data read from / written to the EC
might be incomplete.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 487884420fb0d..60f49ee161479 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1316,10 +1316,13 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 	if (ec->busy_polling || bits > 8)
 		acpi_ec_burst_enable(ec);
 
-	for (i = 0; i < bytes; ++i, ++address, ++value)
+	for (i = 0; i < bytes; ++i, ++address, ++value) {
 		result = (function == ACPI_READ) ?
 			acpi_ec_read(ec, address, value) :
 			acpi_ec_write(ec, address, *value);
+		if (result < 0)
+			break;
+	}
 
 	if (ec->busy_polling || bits > 8)
 		acpi_ec_burst_disable(ec);
-- 
2.43.0

[PATCH AUTOSEL 5.10 03/13] ACPI: EC: Avoid returning AE_OK on errors in address space handler

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit c4bd7f1d78340e63de4d073fd3dbe5391e2996e5 ]

If an error code other than EINVAL, ENODEV or ETIME is returned
by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly
returned by acpi_ec_space_handler().

Fix this by only returning AE_OK on success, and return AE_ERROR
otherwise.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 60f49ee161479..01a6400c32349 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1334,8 +1334,10 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 		return AE_NOT_FOUND;
 	case -ETIME:
 		return AE_TIME;
-	default:
+	case 0:
 		return AE_OK;
+	default:
+		return AE_ERROR;
 	}
 }
 
-- 
2.43.0

[PATCH AUTOSEL 5.10 04/13] wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdata

[Sasha Levin]

From: Nicolas Escande <nico.escande@gmail.com>

[ Upstream commit 6f6291f09a322c1c1578badac8072d049363f4e6 ]

With a ath9k device I can see that:
	iw phy phy0 interface add mesh0 type mp
	ip link set mesh0 up
	iw dev mesh0 scan

Will start a scan with the Power Management bit set in the Frame Control Field.
This is because we set this bit depending on the nonpeer_pm variable of the mesh
iface sdata and when there are no active links on the interface it remains to
NL80211_MESH_POWER_UNKNOWN.

As soon as links starts to be established, it wil switch to
NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta
nonpeer_pm field.
As we want no power save by default, (as expressed with the per sta ini values),
lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE.

Also please note that we cannot change the default value from userspace prior to
establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before
NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan.

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index ce5825d6f1d1c..d3a9ce1f8e53f 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1584,6 +1584,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 	ifmsh->last_preq = jiffies;
 	ifmsh->next_perr = jiffies;
 	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
+	ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE;
 	/* Allocate all mesh structures when creating the first mesh interface. */
 	if (!mesh_allocated)
 		ieee80211s_init();
-- 
2.43.0

[PATCH AUTOSEL 5.10 05/13] wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()

[Sasha Levin]

From: Dmitry Antipov <dmantipov@yandex.ru>

[ Upstream commit 92ecbb3ac6f3fe8ae9edf3226c76aa17b6800699 ]

When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've
noticed the following:

UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4
index 0 is out of range for type 'struct ieee80211_channel *[]'
CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1
Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...>
Call Trace:
 <TASK>
 dump_stack_lvl+0x2d/0x90
 __ubsan_handle_out_of_bounds+0xe7/0x140
 ? timerqueue_add+0x98/0xb0
 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211]
 ? __kmalloc+0xe1/0x470
 __ieee80211_start_scan+0x541/0x760 [mac80211]
 rdev_scan+0x1f/0xe0 [cfg80211]
 nl80211_trigger_scan+0x9b6/0xae0 [cfg80211]
 ...<the rest is not too useful...>

Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels'
uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't
be checked in 'ieee80211_prep_hw_scan()'. Although an initialization
of 'hw_scan_req->req.n_channels' introduces some confusion around
allocated vs. used VLA members, this shouldn't be a problem since
everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'.

Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the
convenient 'struct_size()' as well.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru
[improve (imho) indentation a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/scan.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index b241ff8c015a9..be5d02c129e92 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -727,15 +727,21 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 			local->hw_scan_ies_bufsize *= n_bands;
 		}
 
-		local->hw_scan_req = kmalloc(
-				sizeof(*local->hw_scan_req) +
-				req->n_channels * sizeof(req->channels[0]) +
-				local->hw_scan_ies_bufsize, GFP_KERNEL);
+		local->hw_scan_req = kmalloc(struct_size(local->hw_scan_req,
+							 req.channels,
+							 req->n_channels) +
+					     local->hw_scan_ies_bufsize,
+					     GFP_KERNEL);
 		if (!local->hw_scan_req)
 			return -ENOMEM;
 
 		local->hw_scan_req->req.ssids = req->ssids;
 		local->hw_scan_req->req.n_ssids = req->n_ssids;
+		/* None of the channels are actually set
+		 * up but let UBSAN know the boundaries.
+		 */
+		local->hw_scan_req->req.n_channels = req->n_channels;
+
 		ies = (u8 *)local->hw_scan_req +
 			sizeof(*local->hw_scan_req) +
 			req->n_channels * sizeof(req->channels[0]);
-- 
2.43.0

[PATCH AUTOSEL 5.10 06/13] selftests/openat2: Fix build warnings on ppc64

[Sasha Levin]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 84b6df4c49a1cc2854a16937acd5fd3e6315d083 ]

Fix warnings like:

  openat2_test.c: In function ‘test_openat2_flags’:
  openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
  ‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
  unsigned int’} [-Wformat=]

By switching to unsigned long long for u64 for ppc64 builds.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/openat2/openat2_test.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c
index 453152b58e7f0..1045df1a98c07 100644
--- a/tools/testing/selftests/openat2/openat2_test.c
+++ b/tools/testing/selftests/openat2/openat2_test.c
@@ -5,6 +5,7 @@
  */
 
 #define _GNU_SOURCE
+#define __SANE_USERSPACE_TYPES__ // Use ll64
 #include <fcntl.h>
 #include <sched.h>
 #include <sys/stat.h>
-- 
2.43.0

[PATCH AUTOSEL 5.10 07/13] Input: silead - Always support 10 fingers

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]

When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/silead.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index e8b6c3137420b..901e28bc01645 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -70,7 +70,6 @@ struct silead_ts_data {
 	struct regulator_bulk_data regulators[2];
 	char fw_name[64];
 	struct touchscreen_properties prop;
-	u32 max_fingers;
 	u32 chip_id;
 	struct input_mt_pos pos[SILEAD_MAX_FINGERS];
 	int slots[SILEAD_MAX_FINGERS];
@@ -98,7 +97,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data)
 	input_set_abs_params(data->input, ABS_MT_POSITION_Y, 0, 4095, 0, 0);
 	touchscreen_parse_properties(data->input, true, &data->prop);
 
-	input_mt_init_slots(data->input, data->max_fingers,
+	input_mt_init_slots(data->input, SILEAD_MAX_FINGERS,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
 			    INPUT_MT_TRACK);
 
@@ -145,10 +144,10 @@ static void silead_ts_read_data(struct i2c_client *client)
 		return;
 	}
 
-	if (buf[0] > data->max_fingers) {
+	if (buf[0] > SILEAD_MAX_FINGERS) {
 		dev_warn(dev, "More touches reported then supported %d > %d\n",
-			 buf[0], data->max_fingers);
-		buf[0] = data->max_fingers;
+			 buf[0], SILEAD_MAX_FINGERS);
+		buf[0] = SILEAD_MAX_FINGERS;
 	}
 
 	touch_nr = 0;
@@ -200,7 +199,6 @@ static void silead_ts_read_data(struct i2c_client *client)
 
 static int silead_ts_init(struct i2c_client *client)
 {
-	struct silead_ts_data *data = i2c_get_clientdata(client);
 	int error;
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
@@ -210,7 +208,7 @@ static int silead_ts_init(struct i2c_client *client)
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
-					data->max_fingers);
+					  SILEAD_MAX_FINGERS);
 	if (error)
 		goto i2c_write_err;
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
@@ -437,13 +435,6 @@ static void silead_ts_read_props(struct i2c_client *client)
 	const char *str;
 	int error;
 
-	error = device_property_read_u32(dev, "silead,max-fingers",
-					 &data->max_fingers);
-	if (error) {
-		dev_dbg(dev, "Max fingers read error %d\n", error);
-		data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
-	}
-
 	error = device_property_read_string(dev, "firmware-name", &str);
 	if (!error)
 		snprintf(data->fw_name, sizeof(data->fw_name),
-- 
2.43.0

[PATCH AUTOSEL 5.10 08/13] net: ipv6: rpl_iptunnel: block BH in rpl_output() and rpl_input()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit db0090c6eb12c31246438b7fe2a8f1b833e7a653 ]

As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

Disabling preemption in rpl_output() is not good enough,
because rpl_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().

We might be interrupted by a softirq, re-enter rpl_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable() instead of
preempt_disable().

Apply a similar change in rpl_input().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/rpl_iptunnel.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/net/ipv6/rpl_iptunnel.c b/net/ipv6/rpl_iptunnel.c
index 5fdf3ebb953fb..2ba605db69769 100644
--- a/net/ipv6/rpl_iptunnel.c
+++ b/net/ipv6/rpl_iptunnel.c
@@ -217,9 +217,9 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 	if (unlikely(err))
 		goto drop;
 
-	preempt_disable();
+	local_bh_disable();
 	dst = dst_cache_get(&rlwt->cache);
-	preempt_enable();
+	local_bh_enable();
 
 	if (unlikely(!dst)) {
 		struct ipv6hdr *hdr = ipv6_hdr(skb);
@@ -239,9 +239,9 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 			goto drop;
 		}
 
-		preempt_disable();
+		local_bh_disable();
 		dst_cache_set_ip6(&rlwt->cache, dst, &fl6.saddr);
-		preempt_enable();
+		local_bh_enable();
 	}
 
 	skb_dst_drop(skb);
@@ -273,9 +273,8 @@ static int rpl_input(struct sk_buff *skb)
 		return err;
 	}
 
-	preempt_disable();
+	local_bh_disable();
 	dst = dst_cache_get(&rlwt->cache);
-	preempt_enable();
 
 	skb_dst_drop(skb);
 
@@ -283,14 +282,13 @@ static int rpl_input(struct sk_buff *skb)
 		ip6_route_input(skb);
 		dst = skb_dst(skb);
 		if (!dst->error) {
-			preempt_disable();
 			dst_cache_set_ip6(&rlwt->cache, dst,
 					  &ipv6_hdr(skb)->saddr);
-			preempt_enable();
 		}
 	} else {
 		skb_dst_set(skb, dst);
 	}
+	local_bh_enable();
 
 	err = skb_cow_head(skb, LL_RESERVED_SPACE(dst->dev));
 	if (unlikely(err))
-- 
2.43.0

[PATCH AUTOSEL 5.10 09/13] ila: block BH in ila_output()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit cf28ff8e4c02e1ffa850755288ac954b6ff0db8c ]

As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().

We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ila/ila_lwt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/ila/ila_lwt.c b/net/ipv6/ila/ila_lwt.c
index 8c1ce78956bae..9d37f7164e732 100644
--- a/net/ipv6/ila/ila_lwt.c
+++ b/net/ipv6/ila/ila_lwt.c
@@ -58,7 +58,9 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 		return orig_dst->lwtstate->orig_output(net, sk, skb);
 	}
 
+	local_bh_disable();
 	dst = dst_cache_get(&ilwt->dst_cache);
+	local_bh_enable();
 	if (unlikely(!dst)) {
 		struct ipv6hdr *ip6h = ipv6_hdr(skb);
 		struct flowi6 fl6;
@@ -86,8 +88,11 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 			goto drop;
 		}
 
-		if (ilwt->connected)
+		if (ilwt->connected) {
+			local_bh_disable();
 			dst_cache_set_ip6(&ilwt->dst_cache, dst, &fl6.saddr);
+			local_bh_enable();
+		}
 	}
 
 	skb_dst_set(skb, dst);
-- 
2.43.0

[PATCH AUTOSEL 5.10 10/13] arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process

[Sasha Levin]

From: Wei Li <liwei391@huawei.com>

[ Upstream commit 14951beaec93696b092a906baa0f29322cf34004 ]

The function run_all_insn_set_hw_mode() is registered as startup callback
of 'CPUHP_AP_ARM64_ISNDEP_STARTING', it invokes set_hw_mode() methods of
all emulated instructions.

As the STARTING callbacks are not expected to fail, if one of the
set_hw_mode() fails, e.g. due to el0 mixed-endian is not supported for
'setend', it will report a warning:

```
CPU[2] cannot support the emulation of setend
CPU 2 UP state arm64/isndep:starting (136) failed (-22)
CPU2: Booted secondary processor 0x0000000002 [0x414fd0c1]
```

To fix it, add a check for INSN_UNAVAILABLE status and skip the process.

Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20240423093501.3460764-1-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/armv8_deprecated.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index f0ba854f0045e..34370be75acd5 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -471,6 +471,9 @@ static int run_all_insn_set_hw_mode(unsigned int cpu)
 	for (i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
 		struct insn_emulation *insn = insn_emulations[i];
 		bool enable = READ_ONCE(insn->current_mode) == INSN_HW;
+		if (insn->status == INSN_UNAVAILABLE)
+			continue;
+
 		if (insn->set_hw_mode && insn->set_hw_mode(enable)) {
 			pr_warn("CPU[%u] cannot support the emulation of %s",
 				cpu, insn->name);
-- 
2.43.0

[PATCH AUTOSEL 5.10 11/13] null_blk: fix validation of block size

[Sasha Levin]

From: Andreas Hindborg <a.hindborg@samsung.com>

[ Upstream commit c462ecd659b5fce731f1d592285832fd6ad54053 ]

Block size should be between 512 and PAGE_SIZE and be a power of 2. The current
check does not validate this, so update the check.

Without this patch, null_blk would Oops due to a null pointer deref when
loaded with bs=1536 [1].

Link: https://lore.kernel.org/all/87wmn8mocd.fsf@metaspace.dk/

Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240603192645.977968-1-nmi@metaspace.dk
[axboe: remove unnecessary braces and != 0 check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 35b390a785dd4..37beb94352728 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -1743,8 +1743,8 @@ static int null_validate_conf(struct nullb_device *dev)
 		return -EINVAL;
 	}
 
-	dev->blocksize = round_down(dev->blocksize, 512);
-	dev->blocksize = clamp_t(unsigned int, dev->blocksize, 512, 4096);
+	if (blk_validate_block_size(dev->blocksize))
+		return -EINVAL;
 
 	if (dev->queue_mode == NULL_Q_MQ && dev->use_per_node_hctx) {
 		if (dev->submit_queues != nr_online_nodes)
-- 
2.43.0

[PATCH AUTOSEL 5.10 12/13] kconfig: gconf: give a proper initial state to the Save button

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 46edf4372e336ef3a61c3126e49518099d2e2e6d ]

Currently, the initial state of the "Save" button is always active.

If none of the CONFIG options are changed while loading the .config
file, the "Save" button should be greyed out.

This can be fixed by calling conf_read() after widget initialization.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/gconf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index 5527482c30779..4097999127315 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -1484,7 +1484,6 @@ int main(int ac, char *av[])
 
 	conf_parse(name);
 	fixup_rootmenu(&rootmenu);
-	conf_read(NULL);
 
 	/* Load the interface and connect signals */
 	init_main_window(glade_file);
@@ -1492,6 +1491,8 @@ int main(int ac, char *av[])
 	init_left_tree();
 	init_right_tree();
 
+	conf_read(NULL);
+
 	switch (view_mode) {
 	case SINGLE_VIEW:
 		display_tree_part();
-- 
2.43.0

[PATCH AUTOSEL 5.10 13/13] kconfig: remove wrong expr_trans_bool()

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ]

expr_trans_bool() performs an incorrect transformation.

[Test Code]

    config MODULES
            def_bool y
            modules

    config A
            def_bool y
            select C if B != n

    config B
            def_tristate m

    config C
            tristate

[Result]

    CONFIG_MODULES=y
    CONFIG_A=y
    CONFIG_B=m
    CONFIG_C=m

This output is incorrect because CONFIG_C=y is expected.

Documentation/kbuild/kconfig-language.rst clearly explains the function
of the '!=' operator:

    If the values of both symbols are equal, it returns 'n',
    otherwise 'y'.

Therefore, the statement:

    select C if B != n

should be equivalent to:

    select C if y

Or, more simply:

    select C

Hence, the symbol C should be selected by the value of A, which is 'y'.

However, expr_trans_bool() wrongly transforms it to:

    select C if B

Therefore, the symbol C is selected by (A && B), which is 'm'.

The comment block of expr_trans_bool() correctly explains its intention:

  * bool FOO!=n => FOO
    ^^^^

If FOO is bool, FOO!=n can be simplified into FOO. This is correct.

However, the actual code performs this transformation when FOO is
tristate:

    if (e->left.sym->type == S_TRISTATE) {
                             ^^^^^^^^^^

While it can be fixed to S_BOOLEAN, there is no point in doing so
because expr_tranform() already transforms FOO!=n to FOO when FOO is
bool. (see the "case E_UNEQUAL" part)

expr_trans_bool() is wrong and unnecessary.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/expr.c | 29 -----------------------------
 scripts/kconfig/expr.h |  1 -
 scripts/kconfig/menu.c |  2 --
 3 files changed, 32 deletions(-)

diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index 81ebf8108ca74..81dfdf4470f75 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -396,35 +396,6 @@ static struct expr *expr_eliminate_yn(struct expr *e)
 	return e;
 }
 
-/*
- * bool FOO!=n => FOO
- */
-struct expr *expr_trans_bool(struct expr *e)
-{
-	if (!e)
-		return NULL;
-	switch (e->type) {
-	case E_AND:
-	case E_OR:
-	case E_NOT:
-		e->left.expr = expr_trans_bool(e->left.expr);
-		e->right.expr = expr_trans_bool(e->right.expr);
-		break;
-	case E_UNEQUAL:
-		// FOO!=n -> FOO
-		if (e->left.sym->type == S_TRISTATE) {
-			if (e->right.sym == &symbol_no) {
-				e->type = E_SYMBOL;
-				e->right.sym = NULL;
-			}
-		}
-		break;
-	default:
-		;
-	}
-	return e;
-}
-
 /*
  * e1 || e2 -> ?
  */
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 5c3443692f346..385a47daa3643 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -302,7 +302,6 @@ void expr_free(struct expr *e);
 void expr_eliminate_eq(struct expr **ep1, struct expr **ep2);
 int expr_eq(struct expr *e1, struct expr *e2);
 tristate expr_calc_value(struct expr *e);
-struct expr *expr_trans_bool(struct expr *e);
 struct expr *expr_eliminate_dups(struct expr *e);
 struct expr *expr_transform(struct expr *e);
 int expr_contains_symbol(struct expr *dep, struct symbol *sym);
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index a5fbd6ccc006e..e5ad6313cfa1d 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -401,8 +401,6 @@ void menu_finalize(struct menu *parent)
 				dep = expr_transform(dep);
 				dep = expr_alloc_and(expr_copy(basedep), dep);
 				dep = expr_eliminate_dups(dep);
-				if (menu->sym && menu->sym->type != S_TRISTATE)
-					dep = expr_trans_bool(dep);
 				prop->visible.expr = dep;
 
 				/*
-- 
2.43.0

[PATCH AUTOSEL 5.10 01/13] scsi: qedf: Set qed_slowpath_params to zero before use

[Sasha Levin]

From: Saurav Kashyap <skashyap@marvell.com>

[ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ]

Zero qed_slowpath_params before use.

Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 6923862be3fbc..2536da96130ea 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -3453,6 +3453,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 	}
 
 	/* Start the Slowpath-process */
+	memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params));
 	slowpath_params.int_mode = QED_INT_MODE_MSIX;
 	slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER;
 	slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER;
-- 
2.43.0

[PATCH AUTOSEL 5.10 09/13] ila: block BH in ila_output()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit cf28ff8e4c02e1ffa850755288ac954b6ff0db8c ]

As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().

We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ila/ila_lwt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/ila/ila_lwt.c b/net/ipv6/ila/ila_lwt.c
index 8c1ce78956bae..9d37f7164e732 100644
--- a/net/ipv6/ila/ila_lwt.c
+++ b/net/ipv6/ila/ila_lwt.c
@@ -58,7 +58,9 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 		return orig_dst->lwtstate->orig_output(net, sk, skb);
 	}
 
+	local_bh_disable();
 	dst = dst_cache_get(&ilwt->dst_cache);
+	local_bh_enable();
 	if (unlikely(!dst)) {
 		struct ipv6hdr *ip6h = ipv6_hdr(skb);
 		struct flowi6 fl6;
@@ -86,8 +88,11 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 			goto drop;
 		}
 
-		if (ilwt->connected)
+		if (ilwt->connected) {
+			local_bh_disable();
 			dst_cache_set_ip6(&ilwt->dst_cache, dst, &fl6.saddr);
+			local_bh_enable();
+		}
 	}
 
 	skb_dst_set(skb, dst);
-- 
2.43.0