[PATCH AUTOSEL 5.10 01/14] Input: elantech - fix touchpad state on resume for Lenovo N24

[PATCH AUTOSEL 5.10 01/14] Input: elantech - fix touchpad state on resume for Lenovo N24

[Sasha Levin]

From: Jonathan Denose <jdenose@google.com>

[ Upstream commit a69ce592cbe0417664bc5a075205aa75c2ec1273 ]

The Lenovo N24 on resume becomes stuck in a state where it
sends incorrect packets, causing elantech_packet_check_v4 to fail.
The only way for the device to resume sending the correct packets is for
it to be disabled and then re-enabled.

This change adds a dmi check to trigger this behavior on resume.

Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/elantech.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 400281feb4e8d..8246662fa60b7 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1476,16 +1476,47 @@ static void elantech_disconnect(struct psmouse *psmouse)
 	psmouse->private = NULL;
 }
 
+/*
+ * Some hw_version 4 models fail to properly activate absolute mode on
+ * resume without going through disable/enable cycle.
+ */
+static const struct dmi_system_id elantech_needs_reenable[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Lenovo N24 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
+		},
+	},
+#endif
+	{ }
+};
+
 /*
  * Put the touchpad back into absolute mode when reconnecting
  */
 static int elantech_reconnect(struct psmouse *psmouse)
 {
+	int err;
+
 	psmouse_reset(psmouse);
 
 	if (elantech_detect(psmouse, 0))
 		return -1;
 
+	if (dmi_check_system(elantech_needs_reenable)) {
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		psmouse_err(psmouse,
 			    "failed to put touchpad back into absolute mode.\n");
-- 
2.43.0

[PATCH AUTOSEL 5.10 02/14] Input: i8042 - add Ayaneo Kun to i8042 quirk table

[Sasha Levin]

From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>

[ Upstream commit 955af6355ddfe35140f9706a635838212a32513b ]

See the added comment for details. Also fix a typo in the
quirk's define.

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Link: https://lore.kernel.org/r/20240531190100.3874731-1-tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 6804970d8f51a..91edfb88a218e 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -75,7 +75,7 @@ static inline void i8042_write_command(int val)
 #define SERIO_QUIRK_PROBE_DEFER		BIT(5)
 #define SERIO_QUIRK_RESET_ALWAYS	BIT(6)
 #define SERIO_QUIRK_RESET_NEVER		BIT(7)
-#define SERIO_QUIRK_DIECT		BIT(8)
+#define SERIO_QUIRK_DIRECT		BIT(8)
 #define SERIO_QUIRK_DUMBKBD		BIT(9)
 #define SERIO_QUIRK_NOLOOP		BIT(10)
 #define SERIO_QUIRK_NOTIMEOUT		BIT(11)
@@ -1235,6 +1235,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	{
+		/*
+		 * The Ayaneo Kun is a handheld device where some the buttons
+		 * are handled by an AT keyboard. The keyboard is usually
+		 * detected as raw, but sometimes, usually after a cold boot,
+		 * it is detected as translated. Make sure that the keyboard
+		 * is always in raw mode.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+			DMI_MATCH(DMI_BOARD_NAME, "KUN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DIRECT)
+	},
 	{ }
 };
 
@@ -1553,7 +1567,7 @@ static void __init i8042_check_quirks(void)
 		if (quirks & SERIO_QUIRK_RESET_NEVER)
 			i8042_reset = I8042_RESET_NEVER;
 	}
-	if (quirks & SERIO_QUIRK_DIECT)
+	if (quirks & SERIO_QUIRK_DIRECT)
 		i8042_direct = true;
 	if (quirks & SERIO_QUIRK_DUMBKBD)
 		i8042_dumbkbd = true;
-- 
2.43.0

[PATCH AUTOSEL 5.10 03/14] bytcr_rt5640 : inverse jack detect for Archos 101 cesium

[Sasha Levin]

From: Thomas GENTY <tomlohave@gmail.com>

[ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ]

When headphones are plugged in, they appear absent; when they are removed,
they appear present.
Add a specific entry in bytcr_rt5640 for this device

Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240608170251.99936-1-tomlohave@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 1d049685e7075..47b581d99da67 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -468,6 +468,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_JD_NOT_INV |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
-- 
2.43.0

[PATCH AUTOSEL 5.10 04/14] ALSA: dmaengine: Synchronize dma channel after drop()

[Sasha Levin]

From: Jai Luthra <j-luthra@ti.com>

[ Upstream commit e8343410ddf08fc36a9b9cc7c51a4e53a262d4c6 ]

Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.

In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.

Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/dmaengine_pcm.h         |  1 +
 sound/core/pcm_dmaengine.c            | 10 ++++++++++
 sound/soc/soc-generic-dmaengine-pcm.c |  8 ++++++++
 3 files changed, 19 insertions(+)

diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index 8c5e38180fb04..618405da95b30 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -34,6 +34,7 @@ snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream
 int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
 	struct dma_chan *chan);
 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
+int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream);
 
 int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
 	dma_filter_fn filter_fn, void *filter_data);
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index be58505889a36..db22294452560 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -342,6 +342,16 @@ int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
 }
 EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_chan);
 
+int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream)
+{
+	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+
+	dmaengine_synchronize(prtd->dma_chan);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_sync_stop);
+
 /**
  * snd_dmaengine_pcm_close - Close a dmaengine based PCM substream
  * @substream: PCM substream
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 9ef80a48707eb..d65dc1acff439 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -326,6 +326,12 @@ static int dmaengine_copy_user(struct snd_soc_component *component,
 	return 0;
 }
 
+static int dmaengine_pcm_sync_stop(struct snd_soc_component *component,
+				   struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_sync_stop(substream);
+}
+
 static const struct snd_soc_component_driver dmaengine_pcm_component = {
 	.name		= SND_DMAENGINE_PCM_DRV_NAME,
 	.probe_order	= SND_SOC_COMP_ORDER_LATE,
@@ -335,6 +341,7 @@ static const struct snd_soc_component_driver dmaengine_pcm_component = {
 	.trigger	= dmaengine_pcm_trigger,
 	.pointer	= dmaengine_pcm_pointer,
 	.pcm_construct	= dmaengine_pcm_new,
+	.sync_stop	= dmaengine_pcm_sync_stop,
 };
 
 static const struct snd_soc_component_driver dmaengine_pcm_component_process = {
@@ -347,6 +354,7 @@ static const struct snd_soc_component_driver dmaengine_pcm_component_process = {
 	.pointer	= dmaengine_pcm_pointer,
 	.copy_user	= dmaengine_copy_user,
 	.pcm_construct	= dmaengine_pcm_new,
+	.sync_stop	= dmaengine_pcm_sync_stop,
 };
 
 static const char * const dmaengine_pcm_dma_channel_names[] = {
-- 
2.43.0

[PATCH AUTOSEL 5.10 05/14] ASoC: ti: davinci-mcasp: Set min period size using FIFO config

[Sasha Levin]

From: Jai Luthra <j-luthra@ti.com>

[ Upstream commit c5dcf8ab10606e76c1d8a0ec77f27d84a392e874 ]

The minimum period size was enforced to 64 as older devices integrating
McASP with EDMA used an internal FIFO of 64 samples.

With UDMA based platforms this internal McASP FIFO is optional, as the
DMA engine internally does some buffering which is already accounted for
when registering the platform. So we should read the actual FIFO
configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to
64.

Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-2-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/ti/davinci-mcasp.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c
index a6b72ad53b434..61ea444f2018d 100644
--- a/sound/soc/ti/davinci-mcasp.c
+++ b/sound/soc/ti/davinci-mcasp.c
@@ -1441,10 +1441,11 @@ static int davinci_mcasp_hw_rule_min_periodsize(
 {
 	struct snd_interval *period_size = hw_param_interval(params,
 						SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
+	u8 numevt = *((u8 *)rule->private);
 	struct snd_interval frames;
 
 	snd_interval_any(&frames);
-	frames.min = 64;
+	frames.min = numevt;
 	frames.integer = 1;
 
 	return snd_interval_refine(period_size, &frames);
@@ -1459,6 +1460,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 	u32 max_channels = 0;
 	int i, dir, ret;
 	int tdm_slots = mcasp->tdm_slots;
+	u8 *numevt;
 
 	/* Do not allow more then one stream per direction */
 	if (mcasp->substreams[substream->stream])
@@ -1558,9 +1560,12 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 			return ret;
 	}
 
+	numevt = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			 &mcasp->txnumevt :
+			 &mcasp->rxnumevt;
 	snd_pcm_hw_rule_add(substream->runtime, 0,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
-			    davinci_mcasp_hw_rule_min_periodsize, NULL,
+			    davinci_mcasp_hw_rule_min_periodsize, numevt,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1);
 
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.10 06/14] ASoC: ti: omap-hdmi: Fix too long driver name

[Sasha Levin]

From: Primoz Fiser <primoz.fiser@norik.com>

[ Upstream commit 524d3f126362b6033e92cbe107ae2158d7fbff94 ]

Set driver name to "HDMI". This simplifies the code and gets rid of
the following error messages:

  ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20240610125847.773394-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/ti/omap-hdmi.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/sound/soc/ti/omap-hdmi.c b/sound/soc/ti/omap-hdmi.c
index 3328c02f93c74..1dfe439d13417 100644
--- a/sound/soc/ti/omap-hdmi.c
+++ b/sound/soc/ti/omap-hdmi.c
@@ -353,11 +353,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev)
 	if (!card)
 		return -ENOMEM;
 
-	card->name = devm_kasprintf(dev, GFP_KERNEL,
-				    "HDMI %s", dev_name(ad->dssdev));
-	if (!card->name)
-		return -ENOMEM;
-
+	card->name = "HDMI";
 	card->owner = THIS_MODULE;
 	card->dai_link =
 		devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL);
-- 
2.43.0

[PATCH AUTOSEL 5.10 07/14] can: kvaser_usb: fix return value for hif_usb_send_regout

[Sasha Levin]

From: Chen Ni <nichen@iscas.ac.cn>

[ Upstream commit 0d34d8163fd87978a6abd792e2d8ad849f4c3d57 ]

As the potential failure of usb_submit_urb(), it should be better to
return the err variable to catch the error.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index 1f015b496a472..a26103727fc3e 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -265,7 +265,7 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
 	}
 	usb_free_urb(urb);
 
-	return 0;
+	return err;
 }
 
 int kvaser_usb_can_rx_over_error(struct net_device *netdev)
-- 
2.43.0

[PATCH AUTOSEL 5.10 08/14] s390/sclp: Fix sclp_init() cleanup on failure

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 6434b33faaa063df500af355ee6c3942e0f8d982 ]

If sclp_init() fails it only partially cleans up: if there are multiple
failing calls to sclp_init() sclp_state_change_event will be added several
times to sclp_reg_list, which results in the following warning:

------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
 [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
 [<000003ffe0a8d37e>] sclp_init+0x40e/0x450
 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
 [<000003ffe15b77a6>] do_initcalls+0x126/0x150
 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
 [<000003ffe0d6650e>] kernel_init+0x2e/0x180
 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60
 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30

Fix this by removing sclp_state_change_event from sclp_reg_list when
sclp_init() fails.

Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/char/sclp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index d2ab3f07c008c..8296e6bc229ee 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -1208,6 +1208,7 @@ sclp_init(void)
 fail_unregister_reboot_notifier:
 	unregister_reboot_notifier(&sclp_reboot_notifier);
 fail_init_state_uninitialized:
+	list_del(&sclp_state_change_event.list);
 	sclp_init_state = sclp_init_state_uninitialized;
 	free_page((unsigned long) sclp_read_sccb);
 	free_page((unsigned long) sclp_init_sccb);
-- 
2.43.0

[PATCH AUTOSEL 5.10 09/14] platform/x86: lg-laptop: Remove LGEX0815 hotkey handling

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit 413c204595ca98a4f33414a948c18d7314087342 ]

The rfkill hotkey handling is already provided by the wireless-hotkey
driver. Remove the now unnecessary rfkill hotkey handling to avoid
duplicating functionality.

The ACPI notify handler still prints debugging information when
receiving ACPI notifications to aid in reverse-engineering.

Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/lg-laptop.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c
index dd900a76d8de5..6b48e545775c0 100644
--- a/drivers/platform/x86/lg-laptop.c
+++ b/drivers/platform/x86/lg-laptop.c
@@ -77,7 +77,6 @@ static const struct key_entry wmi_keymap[] = {
 					  * this key both sends an event and
 					  * changes backlight level.
 					  */
-	{KE_KEY, 0x80, {KEY_RFKILL} },
 	{KE_END, 0}
 };
 
@@ -259,14 +258,7 @@ static void wmi_input_setup(void)
 
 static void acpi_notify(struct acpi_device *device, u32 event)
 {
-	struct key_entry *key;
-
 	acpi_handle_debug(device->handle, "notify: %d\n", event);
-	if (inited & INIT_SPARSE_KEYMAP) {
-		key = sparse_keymap_entry_from_scancode(wmi_input_dev, 0x80);
-		if (key && key->type == KE_KEY)
-			sparse_keymap_report_entry(wmi_input_dev, key, 1, true);
-	}
 }
 
 static ssize_t fan_mode_store(struct device *dev,
-- 
2.43.0

[PATCH AUTOSEL 5.10 10/14] platform/x86: lg-laptop: Change ACPI device id

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit 58a54f27a0dac81f7fd3514be01012635219a53c ]

The LGEX0815 ACPI device id is used for handling hotkey events, but
this functionality is already handled by the wireless-hotkey driver.

The LGEX0820 ACPI device id however is used to manage various
platform features using the WMAB/WMBB ACPI methods. Use this ACPI
device id to avoid blocking the wireless-hotkey driver from probing.

Tested-by: Agathe Boutmy <agathe@boutmy.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240606233540.9774-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/lg-laptop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c
index 6b48e545775c0..e3cf567470c8b 100644
--- a/drivers/platform/x86/lg-laptop.c
+++ b/drivers/platform/x86/lg-laptop.c
@@ -647,7 +647,7 @@ static int acpi_remove(struct acpi_device *device)
 }
 
 static const struct acpi_device_id device_ids[] = {
-	{"LGEX0815", 0},
+	{"LGEX0820", 0},
 	{"", 0}
 };
 MODULE_DEVICE_TABLE(acpi, device_ids);
-- 
2.43.0

[PATCH AUTOSEL 5.10 11/14] btrfs: qgroup: fix quota root leak after quota disable failure

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit a7e4c6a3031c74078dba7fa36239d0f4fe476c53 ]

If during the quota disable we fail when cleaning the quota tree or when
deleting the root from the root tree, we jump to the 'out' label without
ever dropping the reference on the quota root, resulting in a leak of the
root since fs_info->quota_root is no longer pointing to the root (we have
set it to NULL just before those steps).

Fix this by always doing a btrfs_put_root() call under the 'out' label.
This is a problem that exists since qgroups were first added in 2012 by
commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but
back then we missed a kfree on the quota root and free_extent_buffer()
calls on its root and commit root nodes, since back then roots were not
yet reference counted.

Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 50669ff9346c6..83d17f22335b1 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1197,7 +1197,7 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info)
 
 int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 {
-	struct btrfs_root *quota_root;
+	struct btrfs_root *quota_root = NULL;
 	struct btrfs_trans_handle *trans = NULL;
 	int ret = 0;
 
@@ -1290,9 +1290,9 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 	btrfs_tree_unlock(quota_root->node);
 	btrfs_free_tree_block(trans, quota_root, quota_root->node, 0, 1);
 
-	btrfs_put_root(quota_root);
 
 out:
+	btrfs_put_root(quota_root);
 	mutex_unlock(&fs_info->qgroup_ioctl_lock);
 	if (ret && trans)
 		btrfs_end_transaction(trans);
-- 
2.43.0

[PATCH AUTOSEL 5.10 12/14] ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx

[Sasha Levin]

From: Aivaz Latypov <reichaivaz@gmail.com>

[ Upstream commit 1d091a98c399c17d0571fa1d91a7123a698446e4 ]

This HP Laptop uses ALC236 codec with COEF 0x07 controlling
the mute LED. Enable existing quirk for this device.

Signed-off-by: Aivaz Latypov <reichaivaz@gmail.com>
Link: https://patch.msgid.link/20240625081217.1049-1-reichaivaz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 4af8094938059..7fb1b828b7af1 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9091,6 +9091,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8788, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x87b7, "HP Laptop 14-fq0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x87c8, "HP", ALC287_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x87d3, "HP Laptop 15-gw0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x87e5, "HP ProBook 440 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x87e7, "HP ProBook 450 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x87f1, "HP ProBook 630 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
-- 
2.43.0

[PATCH AUTOSEL 5.10 13/14] ALSA: dmaengine_pcm: terminate dmaengine before synchronize

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 6a7db25aad8ce6512b366d2ce1d0e60bac00a09d ]

When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),

In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().

This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/pcm_dmaengine.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index db22294452560..a7e2e6955e51c 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -359,6 +359,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_sync_stop);
 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status == DMA_PAUSED)
+		dmaengine_terminate_async(prtd->dma_chan);
 
 	dmaengine_synchronize(prtd->dma_chan);
 	kfree(prtd);
@@ -377,6 +383,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close);
 int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status == DMA_PAUSED)
+		dmaengine_terminate_async(prtd->dma_chan);
 
 	dmaengine_synchronize(prtd->dma_chan);
 	dma_release_channel(prtd->dma_chan);
-- 
2.43.0

[PATCH AUTOSEL 5.10 14/14] net: usb: qmi_wwan: add Telit FN912 compositions

[Sasha Levin]

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit 77453e2b015b5ced5b3f45364dd5a72dfc3bdecb ]

Add the following Telit FN912 compositions:

0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3000 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3001 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 4dd1a9fb4c8a0..d2a8238e144a6 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1312,6 +1312,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x3000, 0)},	/* Telit FN912 series */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x3001, 0)},	/* Telit FN912 series */
 	{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
-- 
2.43.0

Re: [PATCH AUTOSEL 5.10 09/14] platform/x86: lg-laptop: Remove LGEX0815 hotkey handling

[Armin Wolf]

Am 09.07.24 um 18:25 schrieb Sasha Levin:

> From: Armin Wolf <W_Armin@gmx.de>
>
> [ Upstream commit 413c204595ca98a4f33414a948c18d7314087342 ]
>
> The rfkill hotkey handling is already provided by the wireless-hotkey
> driver. Remove the now unnecessary rfkill hotkey handling to avoid
> duplicating functionality.
>
> The ACPI notify handler still prints debugging information when
> receiving ACPI notifications to aid in reverse-engineering.

Hi,

this depends on other patches not in kernel 5.10, please do not use this
patch for kernel 5.10.

Thanks,
Armin Wolf

> Tested-by: Agathe Boutmy <agathe@boutmy.com>
> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Link: https://lore.kernel.org/r/20240606233540.9774-3-W_Armin@gmx.de
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/platform/x86/lg-laptop.c | 8 --------
>   1 file changed, 8 deletions(-)
>
> diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c
> index dd900a76d8de5..6b48e545775c0 100644
> --- a/drivers/platform/x86/lg-laptop.c
> +++ b/drivers/platform/x86/lg-laptop.c
> @@ -77,7 +77,6 @@ static const struct key_entry wmi_keymap[] = {
>   					  * this key both sends an event and
>   					  * changes backlight level.
>   					  */
> -	{KE_KEY, 0x80, {KEY_RFKILL} },
>   	{KE_END, 0}
>   };
>
> @@ -259,14 +258,7 @@ static void wmi_input_setup(void)
>
>   static void acpi_notify(struct acpi_device *device, u32 event)
>   {
> -	struct key_entry *key;
> -
>   	acpi_handle_debug(device->handle, "notify: %d\n", event);
> -	if (inited & INIT_SPARSE_KEYMAP) {
> -		key = sparse_keymap_entry_from_scancode(wmi_input_dev, 0x80);
> -		if (key && key->type == KE_KEY)
> -			sparse_keymap_report_entry(wmi_input_dev, key, 1, true);
> -	}
>   }
>
>   static ssize_t fan_mode_store(struct device *dev,

Re: [PATCH AUTOSEL 5.10 10/14] platform/x86: lg-laptop: Change ACPI device id

[Armin Wolf]

Am 09.07.24 um 18:25 schrieb Sasha Levin:

> From: Armin Wolf <W_Armin@gmx.de>
>
> [ Upstream commit 58a54f27a0dac81f7fd3514be01012635219a53c ]
>
> The LGEX0815 ACPI device id is used for handling hotkey events, but
> this functionality is already handled by the wireless-hotkey driver.
>
> The LGEX0820 ACPI device id however is used to manage various
> platform features using the WMAB/WMBB ACPI methods. Use this ACPI
> device id to avoid blocking the wireless-hotkey driver from probing.

Hi,

this depends on other patches not in kernel 5.10, please do not use this
patch for kernel 5.10.

Thanks,
Armin Wolf

>
> Tested-by: Agathe Boutmy <agathe@boutmy.com>
> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Link: https://lore.kernel.org/r/20240606233540.9774-4-W_Armin@gmx.de
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/platform/x86/lg-laptop.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c
> index 6b48e545775c0..e3cf567470c8b 100644
> --- a/drivers/platform/x86/lg-laptop.c
> +++ b/drivers/platform/x86/lg-laptop.c
> @@ -647,7 +647,7 @@ static int acpi_remove(struct acpi_device *device)
>   }
>
>   static const struct acpi_device_id device_ids[] = {
> -	{"LGEX0815", 0},
> +	{"LGEX0820", 0},
>   	{"", 0}
>   };
>   MODULE_DEVICE_TABLE(acpi, device_ids);