FAILED: patch "[PATCH] MIPS: dts: loongson: Fix ls2k1000-rtc interrupt" failed to apply to 6.10-stable tree

[<gregkh@linuxfoundation.org>]

The patch below does not apply to the 6.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.10.y
git checkout FETCH_HEAD
git cherry-pick -x f70fd92df7529e7283e02a6c3a2510075f13ba30
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024073000-directory-swimmable-5878@gregkh' --subject-prefix 'PATCH 6.10.y' HEAD^..

Possible dependencies:

f70fd92df752 ("MIPS: dts: loongson: Fix ls2k1000-rtc interrupt")
dbb69b9d6234 ("MIPS: dts: loongson: Fix liointc IRQ polarity")
d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From f70fd92df7529e7283e02a6c3a2510075f13ba30 Mon Sep 17 00:00:00 2001
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Fri, 14 Jun 2024 16:40:11 +0100
Subject: [PATCH] MIPS: dts: loongson: Fix ls2k1000-rtc interrupt

The correct interrupt line for RTC is line 8 on liointc1.

Fixes: e47084e116fc ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 3f5255584c30..c3a57a0befa7 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -92,8 +92,8 @@ liointc1: interrupt-controller@1fe11440 {
 		rtc0: rtc@1fe07800 {
 			compatible = "loongson,ls2k1000-rtc";
 			reg = <0 0x1fe07800 0 0x78>;
-			interrupt-parent = <&liointc0>;
-			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		uart0: serial@1fe00000 {