From: <gregkh@linuxfoundation.org>
To: jiaxun.yang@flygoat.com,tsbogend@alpha.franken.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] MIPS: dts: loongson: Fix liointc IRQ polarity" failed to apply to 6.10-stable tree
Date: Tue, 30 Jul 2024 12:27:54 +0200 [thread overview]
Message-ID: <2024073054-estate-stylishly-6520@gregkh> (raw)
The patch below does not apply to the 6.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.10.y
git checkout FETCH_HEAD
git cherry-pick -x dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024073054-estate-stylishly-6520@gregkh' --subject-prefix 'PATCH 6.10.y' HEAD^..
Possible dependencies:
dbb69b9d6234 ("MIPS: dts: loongson: Fix liointc IRQ polarity")
d89a415ff8d5 ("MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d Mon Sep 17 00:00:00 2001
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Fri, 14 Jun 2024 16:40:10 +0100
Subject: [PATCH] MIPS: dts: loongson: Fix liointc IRQ polarity
All internal liointc interrupts are high level triggered.
Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index f5a74338bf05..3f5255584c30 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -93,7 +93,7 @@ rtc0: rtc@1fe07800 {
compatible = "loongson,ls2k1000-rtc";
reg = <0 0x1fe07800 0 0x78>;
interrupt-parent = <&liointc0>;
- interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
};
uart0: serial@1fe00000 {
@@ -101,7 +101,7 @@ uart0: serial@1fe00000 {
reg = <0 0x1fe00000 0 0x8>;
clock-frequency = <125000000>;
interrupt-parent = <&liointc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
@@ -124,8 +124,8 @@ gmac@3,0 {
"pciclass0c03";
reg = <0x1800 0x0 0x0 0x0 0x0>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
- <13 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
phy-mode = "rgmii";
@@ -147,8 +147,8 @@ gmac@3,1 {
"loongson, pci-gmac";
reg = <0x1900 0x0 0x0 0x0 0x0>;
- interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
- <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "eth_lpi";
interrupt-parent = <&liointc0>;
phy-mode = "rgmii";
@@ -169,7 +169,7 @@ ehci@4,1 {
"pciclass0c03";
reg = <0x2100 0x0 0x0 0x0 0x0>;
- interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
};
@@ -180,7 +180,7 @@ ohci@4,2 {
"pciclass0c03";
reg = <0x2200 0x0 0x0 0x0 0x0>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
};
@@ -191,7 +191,7 @@ sata@8,0 {
"pciclass0106";
reg = <0x4000 0x0 0x0 0x0 0x0>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc0>;
};
@@ -206,10 +206,10 @@ pcie@9,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -225,10 +225,10 @@ pcie@a,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -244,10 +244,10 @@ pcie@b,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -263,10 +263,10 @@ pcie@c,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -282,10 +282,10 @@ pcie@d,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
@@ -301,10 +301,10 @@ pcie@e,0 {
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&liointc1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
ranges;
external-facing;
};
reply other threads:[~2024-07-30 10:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024073054-estate-stylishly-6520@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=jiaxun.yang@flygoat.com \
--cc=stable@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox