[PATCH 6.6 000/121] 6.6.45-rc1 review

[PATCH 6.6 000/121] 6.6.45-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.6.45 release.
There are 121 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.6.45-rc1

Paolo Abeni <pabeni@redhat.com>
    mptcp: prevent BPF accessing lowat from a subflow socket.

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    selftests: mptcp: join: check backup support in signal endp

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    selftests: mptcp: join: validate backup in MPJ

Liu Jing <liujing@cmss.chinamobile.com>
    selftests: mptcp: always close input's FD if opened

Paolo Abeni <pabeni@redhat.com>
    mptcp: fix duplicate data handling

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    mptcp: pm: only set request_bkup flag when sending MP_PRIO

Paolo Abeni <pabeni@redhat.com>
    mptcp: fix bad RCVPRUNED mib accounting

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    mptcp: mib: count MPJ with backup flag

Paolo Abeni <pabeni@redhat.com>
    mptcp: fix NL PM announced address accounting

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    mptcp: distinguish rcv vs sent backup flag in requests

Paolo Abeni <pabeni@redhat.com>
    mptcp: fix user-space PM announced address accounting

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY

Ma Ke <make24@iscas.ac.cn>
    net: usb: sr9700: fix uninitialized variable use in sr_mdio_read

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()

Dmitry Osipenko <dmitry.osipenko@collabora.com>
    drm/virtio: Fix type of dma-fence context variable

Zack Rusin <zack.rusin@broadcom.com>
    drm/vmwgfx: Fix a deadlock in dma buf fence polling

Edmund Raile <edmund.raile@protonmail.com>
    Revert "ALSA: firewire-lib: operate for period elapse event in process context"

Edmund Raile <edmund.raile@protonmail.com>
    Revert "ALSA: firewire-lib: obsolete workqueue for period update"

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: ump: Optimize conversions from SysEx to UMP

Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
    ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Correct surround channels in UAC1 channel map

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    mptcp: sched: check both directions for backup

Al Viro <viro@zeniv.linux.org.uk>
    protect the fetch of ->fd[fd] in do_dup2() from mispredictions

Naohiro Aota <naohiro.aota@wdc.com>
    btrfs: do not subtract delalloc from avail bytes

Naohiro Aota <naohiro.aota@wdc.com>
    btrfs: zoned: fix zone_unusable accounting on making block group read-write again

Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
    HID: wacom: Modify pen IDs

Patryk Duda <patrykd@google.com>
    platform/chrome: cros_ec_proto: Lock device when updating MKBP version

Alice Ryhl <aliceryhl@google.com>
    rust: SHADOW_CALL_STACK is incompatible with Rust

Will Deacon <will@kernel.org>
    arm64: jump_label: Ensure patched jump_labels are visible to all CPUs

Stuart Menefy <stuart.menefy@codasip.com>
    riscv: Fix linear mapping checks for non-contiguous memory regions

Zhe Qiao <qiaozhe@iscas.ac.cn>
    riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()

Shifrin Dmitry <dmitry.shifrin@syntacore.com>
    perf: riscv: Fix selecting counters in legacy mode

Clément Léger <cleger@rivosinc.com>
    riscv: remove unused functions in traps_misaligned.c

Maciej Żenczykowski <maze@google.com>
    ipv6: fix ndisc_is_useropt() handling for PIO

Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
    igc: Fix double reset adapter triggered from a single taprio cmd

Shahar Shitrit <shshitrit@nvidia.com>
    net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys

Chris Mi <cmi@nvidia.com>
    net/mlx5e: Fix CT entry update leaks of modify header context

Rahul Rameshbabu <rrameshbabu@nvidia.com>
    net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability

Moshe Shemesh <moshe@nvidia.com>
    net/mlx5: Fix missing lock on sync reset reload

Mark Bloch <mbloch@nvidia.com>
    net/mlx5: Lag, don't use the hardcoded value of the first port

Shay Drory <shayd@nvidia.com>
    net/mlx5: Fix error handling in irq_pool_request_irq

Shay Drory <shayd@nvidia.com>
    net/mlx5: Always drain health in shutdown callback

Kuniyuki Iwashima <kuniyu@amazon.com>
    netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().

Kuniyuki Iwashima <kuniyu@amazon.com>
    netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Conditionally use snooping for AMD HDMI

Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
    net: phy: micrel: Fix the KSZ9131 MDI-X status issue

Dan Carpenter <dan.carpenter@linaro.org>
    net: mvpp2: Don't re-use loop iterator

Suraj Kandpal <suraj.kandpal@intel.com>
    drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro

Alexandra Winter <wintera@linux.ibm.com>
    net/iucv: fix use after free in iucv_sock_close()

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: replace synchronize_rcu with synchronize_net

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: don't busy wait for Rx queue disable in ice_qp_dis()

Michal Kubiak <michal.kubiak@intel.com>
    ice: respect netif readiness in AF_XDP ZC related ndo's

Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
    i915/perf: Remove code to update PWR_CLK_STATE for gen12

Kuniyuki Iwashima <kuniyu@amazon.com>
    rtnetlink: Don't ignore IFLA_TARGET_NETNSID when ifname is specified in rtnl_dellink().

Andy Chiu <andy.chiu@sifive.com>
    net: axienet: start napi before enabling Rx/Tx

Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
    tcp: Adjust clamping window for applications specifying SO_RCVBUF

Eric Dumazet <edumazet@google.com>
    tcp: annotate data-races around tp->window_clamp

Paolo Abeni <pabeni@redhat.com>
    mptcp: give rcvlowat some love

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_sync: Fix suspending with wrong filter policy

Kiran K <kiran.k@intel.com>
    Bluetooth: btintel: Fail setup on error

songxiebing <songxiebing@kylinos.cn>
    ALSA: hda: conexant: Fix headset auto detect fail in the polling mode

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: conexant: Reduce CONFIG_PM dependencies

Mark Mentovai <mark@mentovai.com>
    net: phy: realtek: add support for RTL8366S Gigabit PHY

Veerendranath Jakkam <quic_vjakkam@quicinc.com>
    wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done

Eric Dumazet <edumazet@google.com>
    sched: act_ct: take care of padding in struct zones_ht_key

Ian Forbes <ian.forbes@broadcom.com>
    drm/vmwgfx: Trigger a modeset when the screen moves

Ian Forbes <ian.forbes@broadcom.com>
    drm/vmwgfx: Fix overlay when using Screen Targets

Danilo Krummrich <dakr@kernel.org>
    drm/nouveau: prime: fix refcount underflow

Casey Chen <cachen@purestorage.com>
    perf tool: fix dereferencing NULL al->maps

Basavaraj Natikar <Basavaraj.Natikar@amd.com>
    HID: amd_sfh: Move sensor discovery before HID device initialization

Jinjie Ruan <ruanjinjie@huawei.com>
    ARM: 9406/1: Fix callchain_trace() return value

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: dts: loongson: Fix ls2k1000-rtc interrupt

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: dts: loongson: Fix liointc IRQ polarity

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a

Xu Yang <xu.yang_2@nxp.com>
    perf: imx_perf: fix counter start and config sequence

Joy Zou <joy.zou@nxp.com>
    dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM

Joy Zou <joy.zou@nxp.com>
    dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string

Joy Zou <joy.zou@nxp.com>
    dmaengine: fsl-edma: add i.MX8ULP edma support

Frank Li <Frank.Li@nxp.com>
    dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan

Jaegeuk Kim <jaegeuk@kernel.org>
    f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid

Zhiguo Niu <zhiguo.niu@unisoc.com>
    f2fs: fix to avoid use SSR allocate when do defragment

Li Zhijian <lizhijian@fujitsu.com>
    mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()

Lucas Stach <l.stach@pengutronix.de>
    mm: page_alloc: control latency caused by zone PCP draining

Huang Ying <ying.huang@intel.com>
    mm: restrict the pcp batch scale factor to avoid too long latency

Thomas Zimmermann <tzimmermann@suse.de>
    fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes

Thomas Zimmermann <tzimmermann@suse.de>
    firmware/sysfb: Update screen_info for relocated EFI framebuffers

Thomas Zimmermann <tzimmermann@suse.de>
    video: Provide screen_info_get_pci_dev() to find screen_info's PCI device

Thomas Zimmermann <tzimmermann@suse.de>
    video: Add helpers for decoding screen_info

Thomas Zimmermann <tzimmermann@suse.de>
    fbdev/vesafb: Replace references to global screen_info by local pointer

Sui Jingfeng <suijingfeng@loongson.cn>
    PCI: Add pci_get_base_class() helper

Sean Christopherson <seanjc@google.com>
    KVM: nVMX: Check for pending posted interrupts when looking for nested events

Sean Christopherson <seanjc@google.com>
    KVM: nVMX: Add a helper to get highest pending from Posted Interrupt vector

Jacob Pan <jacob.jun.pan@linux.intel.com>
    KVM: VMX: Move posted interrupt descriptor out of VMX code

Vitaly Kuznetsov <vkuznets@redhat.com>
    KVM: VMX: Split off vmx_onhyperv.{ch} from hyperv.{ch}

Thomas Weißschuh <linux@weissschuh.net>
    leds: triggers: Flush pending brightness before activating trigger

Hans de Goede <hdegoede@redhat.com>
    leds: trigger: Call synchronize_rcu() before calling trig->activate()

Heiner Kallweit <hkallweit1@gmail.com>
    leds: trigger: Store brightness set by led_trigger_event()

Heiner Kallweit <hkallweit1@gmail.com>
    leds: trigger: Remove unused function led_trigger_rename_static()

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    cpufreq: qcom-nvmem: fix memory leaks in probe error paths

Stephan Gerhold <stephan.gerhold@kernkonzept.com>
    cpufreq: qcom-nvmem: Simplify driver data allocation

Zhang Yi <yi.zhang@huawei.com>
    ext4: check the extent status again before inserting delalloc block

Zhang Yi <yi.zhang@huawei.com>
    ext4: factor out a common helper to query extent map

Zhang Yi <yi.zhang@huawei.com>
    ext4: convert to exclusive lock while inserting delalloc extents

Zhang Yi <yi.zhang@huawei.com>
    ext4: refactor ext4_da_map_blocks()

Thomas Weißschuh <linux@weissschuh.net>
    sysctl: always initialize i_uid/i_gid

Thomas Weißschuh <linux@weissschuh.net>
    sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)

Alexey Gladkov <legion@kernel.org>
    sysctl: allow to change limits for posix messages queues

Alexey Gladkov <legion@kernel.org>
    sysctl: allow change system v ipc sysctls inside ipc namespace

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    thermal/drivers/broadcom: Fix race between removal and clock disable

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    thermal: bcm2835: Convert to platform remove callback returning void

Krishna Kurapati <quic_kriskura@quicinc.com>
    arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of bindings

Krishna Kurapati <quic_kriskura@quicinc.com>
    arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB

Krishna Kurapati <quic_kriskura@quicinc.com>
    arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings

Krishna Kurapati <quic_kriskura@quicinc.com>
    arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of bindings

Krishna Kurapati <quic_kriskura@quicinc.com>
    arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/kernel/perf_callchain.c                   |   3 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              |   2 +
 arch/arm64/boot/dts/qcom/msm8998.dtsi              |  36 ++--
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |  58 ++----
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  60 ++----
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  98 ++++------
 arch/arm64/include/asm/jump_label.h                |   1 +
 arch/arm64/kernel/jump_label.c                     |  11 +-
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi |  81 +++++---
 arch/riscv/kernel/traps_misaligned.c               |  48 +----
 arch/riscv/mm/fault.c                              |  17 +-
 arch/riscv/mm/init.c                               |  15 +-
 arch/x86/include/asm/posted_intr.h                 |  88 +++++++++
 arch/x86/kvm/Makefile                              |   4 +
 arch/x86/kvm/vmx/hyperv.c                          | 139 -------------
 arch/x86/kvm/vmx/hyperv.h                          | 217 ++++++++++-----------
 arch/x86/kvm/vmx/nested.c                          |  41 +++-
 arch/x86/kvm/vmx/posted_intr.h                     | 101 +---------
 arch/x86/kvm/vmx/vmx.c                             |   2 +
 arch/x86/kvm/vmx/vmx.h                             |   2 +-
 arch/x86/kvm/vmx/vmx_onhyperv.c                    |  36 ++++
 arch/x86/kvm/vmx/vmx_onhyperv.h                    | 124 ++++++++++++
 arch/x86/kvm/vmx/vmx_ops.h                         |   2 +-
 drivers/bluetooth/btintel.c                        |   3 +
 drivers/cpufreq/qcom-cpufreq-nvmem.c               |  50 +++--
 drivers/dma/fsl-edma-common.c                      |  31 +--
 drivers/dma/fsl-edma-common.h                      |   6 +-
 drivers/dma/fsl-edma-main.c                        |  25 ++-
 drivers/firmware/Kconfig                           |   1 +
 drivers/firmware/sysfb.c                           |   2 +
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c      |   6 +-
 drivers/gpu/drm/i915/display/intel_hdcp_regs.h     |   2 +-
 drivers/gpu/drm/i915/i915_perf.c                   |  33 ----
 drivers/gpu/drm/nouveau/nouveau_prime.c            |   3 +-
 drivers/gpu/drm/virtio/virtgpu_submit.c            |   2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c              |  17 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c            |   2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c               |  29 ++-
 drivers/hid/amd-sfh-hid/amd_sfh_client.c           |  18 +-
 drivers/hid/wacom_wac.c                            |   3 +-
 drivers/leds/led-triggers.c                        |  32 +--
 drivers/leds/trigger/ledtrig-timer.c               |   5 -
 drivers/net/ethernet/intel/ice/ice_txrx.c          |   2 +-
 drivers/net/ethernet/intel/ice/ice_xsk.c           |  19 +-
 drivers/net/ethernet/intel/igc/igc_main.c          |  33 ++--
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |   6 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c |   1 +
 .../mellanox/mlx5/core/en_accel/ipsec_offload.c    |   7 +-
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |   7 +-
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |   5 +-
 .../net/ethernet/mellanox/mlx5/core/irq_affinity.c |  10 +-
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c  |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |   2 +-
 .../ethernet/mellanox/mlx5/core/sf/dev/driver.c    |   1 +
 drivers/net/ethernet/realtek/r8169_main.c          |   8 +-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c  |   2 +-
 drivers/net/phy/micrel.c                           |  34 ++--
 drivers/net/phy/realtek.c                          |   7 +
 drivers/net/usb/sr9700.c                           |  11 +-
 drivers/pci/search.c                               |  31 +++
 drivers/perf/fsl_imx9_ddr_perf.c                   |   6 +-
 drivers/perf/riscv_pmu_sbi.c                       |   2 +-
 drivers/platform/chrome/cros_ec_proto.c            |   2 +
 drivers/thermal/broadcom/bcm2835_thermal.c         |  25 +--
 drivers/video/Kconfig                              |   4 +
 drivers/video/Makefile                             |   4 +
 drivers/video/fbdev/vesafb.c                       |  66 ++++---
 drivers/video/screen_info_generic.c                | 146 ++++++++++++++
 drivers/video/screen_info_pci.c                    | 136 +++++++++++++
 fs/btrfs/block-group.c                             |  13 +-
 fs/btrfs/extent-tree.c                             |   3 +-
 fs/btrfs/free-space-cache.c                        |   4 +-
 fs/btrfs/space-info.c                              |   5 +-
 fs/btrfs/space-info.h                              |   1 +
 fs/ext4/inode.c                                    |  98 ++++++----
 fs/f2fs/segment.c                                  |   4 +-
 fs/file.c                                          |   1 +
 fs/proc/proc_sysctl.c                              |   8 +-
 include/linux/leds.h                               |  30 ++-
 include/linux/pci.h                                |   5 +
 include/linux/screen_info.h                        | 136 +++++++++++++
 include/linux/sysctl.h                             |   1 -
 include/trace/events/btrfs.h                       |   8 +
 include/trace/events/mptcp.h                       |   2 +-
 init/Kconfig                                       |   1 +
 ipc/ipc_sysctl.c                                   |  36 +++-
 ipc/mq_sysctl.c                                    |  35 ++++
 mm/Kconfig                                         |  11 ++
 mm/page_alloc.c                                    |  19 +-
 net/bluetooth/hci_sync.c                           |  21 ++
 net/core/rtnetlink.c                               |   2 +-
 net/ipv4/netfilter/iptable_nat.c                   |  18 +-
 net/ipv4/syncookies.c                              |   3 +-
 net/ipv4/tcp.c                                     |   8 +-
 net/ipv4/tcp_input.c                               |  36 ++--
 net/ipv4/tcp_output.c                              |  18 +-
 net/ipv6/ndisc.c                                   |  34 ++--
 net/ipv6/netfilter/ip6table_nat.c                  |  14 +-
 net/ipv6/syncookies.c                              |   2 +-
 net/iucv/af_iucv.c                                 |   4 +-
 net/mptcp/mib.c                                    |   2 +
 net/mptcp/mib.h                                    |   2 +
 net/mptcp/options.c                                |   2 +-
 net/mptcp/pm_netlink.c                             |  28 ++-
 net/mptcp/protocol.c                               |  44 ++---
 net/mptcp/protocol.h                               |  21 ++
 net/mptcp/sockopt.c                                |  46 +++++
 net/mptcp/subflow.c                                |  35 +++-
 net/sched/act_ct.c                                 |   4 +-
 net/sysctl_net.c                                   |   1 -
 net/wireless/sme.c                                 |   1 +
 sound/core/seq/seq_ump_convert.c                   |  41 ++--
 sound/firewire/amdtp-stream.c                      |  38 ++--
 sound/firewire/amdtp-stream.h                      |   1 +
 sound/pci/hda/hda_controller.h                     |   2 +-
 sound/pci/hda/hda_intel.c                          |  10 +-
 sound/pci/hda/patch_conexant.c                     |  58 +-----
 sound/pci/hda/patch_realtek.c                      |   1 +
 sound/usb/stream.c                                 |   4 +-
 tools/perf/util/callchain.c                        |   2 +-
 tools/testing/selftests/net/mptcp/mptcp_connect.c  |   8 +-
 tools/testing/selftests/net/mptcp/mptcp_join.sh    |  72 +++++--
 123 files changed, 1922 insertions(+), 1121 deletions(-)

[PATCH 6.6 001/121] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit ebb840b00b7f9fc15153b37a7d9ec5b47a5308c1 ]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 5b8baed4b881 ("arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 57 ++++++++++------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f7c528ecb224b..18ef8fb5c8c7a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -2795,49 +2796,28 @@ usb_1_hsphy: phy@88e3000 {
 			nvmem-cells = <&qusb2p_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x3c>,
-			      <0 0x088ea000 0 0x18c>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x18>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		pmu@90b6300 {
@@ -3001,7 +2981,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3307,8 +3287,9 @@ mdss_dp: displayport-controller@ae90000 {
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3365,8 +3346,8 @@ dispcc: clock-controller@af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi0_phy 0>,
 				 <&mdss_dsi0_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
-- 
2.43.0

[PATCH 6.6 002/121] arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <quic_kriskura@quicinc.com>

[ Upstream commit 5b8baed4b88132c12010ce6ca1b56f00d122e376 ]

On SC7180, in host mode, it is observed that stressing out controller
results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7180 to mitigate this issue.

Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 18ef8fb5c8c7a..68b1c017a9fd5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2981,6 +2981,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
-- 
2.43.0

[PATCH 6.6 003/121] arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of bindings

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 36888ed83f998c3335272f9e353eaf6d109e2429 ]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 3d930f1750ce ("arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 59 +++++++++-------------------
 1 file changed, 19 insertions(+), 40 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index b75de7caaa7e5..dd1d9d10c6615 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -858,7 +859,7 @@ gcc: clock-controller@100000 {
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
 				 <0>, <&pcie1_lane>,
 				 <0>, <0>, <0>,
-				 <&usb_1_ssphy>;
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -3351,49 +3352,26 @@ usb_2_hsphy: phy@88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
-				     "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2: usb@8cf8800 {
@@ -3702,7 +3680,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3807,8 +3785,8 @@ dispcc: clock-controller@af00000 {
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
 				 <&mdss_edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -4144,8 +4122,9 @@ mdss_dp: displayport-controller@ae90000 {
 						"stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
-- 
2.43.0

[PATCH 6.6 004/121] arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <quic_kriskura@quicinc.com>

[ Upstream commit 3d930f1750ce30a6c36dbc71f8ff7e20322b94d7 ]

On SC7280, in host mode, it is observed that stressing out controller
results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7280 to mitigate this issue.

Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index dd1d9d10c6615..149c7962f2cbb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3680,6 +3680,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
-- 
2.43.0

[PATCH 6.6 005/121] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit b7efebfeb2e8ad8187cdabba5f0212ba2e6c1069 ]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-11-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 0046325ae520 ("arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 35 +++++++++++----------------
 1 file changed, 14 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 9c072ce197358..d49764eeab9c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2159,7 +2159,7 @@ usb3_dwc3: usb@a800000 {
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2168,33 +2168,26 @@ usb3_dwc3: usb@a800000 {
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
-- 
2.43.0

[PATCH 6.6 006/121] arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <quic_kriskura@quicinc.com>

[ Upstream commit 0046325ae52079b46da13a7f84dd7b2a6f7c38f8 ]

For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index d49764eeab9c9..7fcc15b6946ae 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2159,6 +2159,7 @@ usb3_dwc3: usb@a800000 {
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
-- 
2.43.0

[PATCH 6.6 007/121] arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <quic_kriskura@quicinc.com>

[ Upstream commit dc6ba95c6c4400a84cca5b419b34ae852a08cfb5 ]

For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 5effd8180cc41..e5993a365870c 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -641,6 +641,7 @@ dwc_0: usb@8a00000 {
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_0>, <&usb0_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -683,6 +684,7 @@ dwc_1: usb@8c00000 {
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_1>, <&usb1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
-- 
2.43.0

[PATCH 6.6 008/121] arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of bindings

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit a9ecdec45a3a59057a68cf61ba4569d34caea5fc ]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: cf4d6d54eadb ("arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 57 ++++++++++------------------
 1 file changed, 19 insertions(+), 38 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 9d9b378c07e14..494eac409ee9f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -3983,49 +3984,28 @@ usb_2_hsphy: phy@88e3000 {
 			nvmem-cells = <&qusb2s_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4105,7 +4085,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4573,8 +4553,9 @@ mdss_dp: displayport-controller@ae90000 {
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4912,8 +4893,8 @@ dispcc: clock-controller@af00000 {
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",
-- 
2.43.0

[PATCH 6.6 009/121] arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit ca5ca568d7388b38039c8d658735fc539352b1db ]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-12-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: cf4d6d54eadb ("arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 39 ++++++++++++----------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 494eac409ee9f..abffd0ad6e90c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4010,33 +4010,28 @@ usb_1_qmpphy: phy@88e8000 {
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4136,7 +4131,7 @@ usb_2_dwc3: usb@a800000 {
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
-- 
2.43.0

[PATCH 6.6 010/121] arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <quic_kriskura@quicinc.com>

[ Upstream commit cf4d6d54eadb60d2ee4d31c9d92299f5e8dcb55c ]

For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:

 xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
 xhci-hcd.12.auto: xHCI host controller not responding, assume dead
 xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.

Cc: stable@vger.kernel.org
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index abffd0ad6e90c..dcdc8a0cd1819 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4080,6 +4080,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -4131,6 +4132,7 @@ usb_2_dwc3: usb@a800000 {
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
-- 
2.43.0

[PATCH 6.6 011/121] thermal: bcm2835: Convert to platform remove callback returning void

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit f29ecd3748a28d0b52512afc81b3c13fd4a00c9b ]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: e90c369cc2ff ("thermal/drivers/broadcom: Fix race between removal and clock disable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 3acc9288b3105..5c1cebe075801 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -282,19 +282,17 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 	return err;
 }
 
-static int bcm2835_thermal_remove(struct platform_device *pdev)
+static void bcm2835_thermal_remove(struct platform_device *pdev)
 {
 	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
 
 	debugfs_remove_recursive(data->debugfsdir);
 	clk_disable_unprepare(data->clk);
-
-	return 0;
 }
 
 static struct platform_driver bcm2835_thermal_driver = {
 	.probe = bcm2835_thermal_probe,
-	.remove = bcm2835_thermal_remove,
+	.remove_new = bcm2835_thermal_remove,
 	.driver = {
 		.name = "bcm2835_thermal",
 		.of_match_table = bcm2835_thermal_of_match_table,
-- 
2.43.0

[PATCH 6.6 012/121] thermal/drivers/broadcom: Fix race between removal and clock disable

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit e90c369cc2ffcf7145a46448de101f715a1f5584 ]

During the probe, driver enables clocks necessary to access registers
(in get_temp()) and then registers thermal zone with managed-resources
(devm) interface.  Removal of device is not done in reversed order,
because:
1. Clock will be disabled in driver remove() callback - thermal zone is
   still registered and accessible to users,
2. devm interface will unregister thermal zone.

This leaves short window between (1) and (2) for accessing the
get_temp() callback with disabled clock.

Fix this by enabling clock also via devm-interface, so entire cleanup
path will be in proper, reversed order.

Fixes: 8454c8c09c77 ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 5c1cebe075801..3b1030fc4fbfe 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -185,7 +185,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	data->clk = devm_clk_get(&pdev->dev, NULL);
+	data->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(data->clk)) {
 		err = PTR_ERR(data->clk);
 		if (err != -EPROBE_DEFER)
@@ -193,10 +193,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	err = clk_prepare_enable(data->clk);
-	if (err)
-		return err;
-
 	rate = clk_get_rate(data->clk);
 	if ((rate < 1920000) || (rate > 5000000))
 		dev_warn(&pdev->dev,
@@ -211,7 +207,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Failed to register the thermal device: %d\n",
 			err);
-		goto err_clk;
+		return err;
 	}
 
 	/*
@@ -236,7 +232,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"Not able to read trip_temp: %d\n",
 				err);
-			goto err_tz;
+			return err;
 		}
 
 		/* set bandgap reference voltage and enable voltage regulator */
@@ -269,17 +265,11 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 	 */
 	err = thermal_add_hwmon_sysfs(tz);
 	if (err)
-		goto err_tz;
+		return err;
 
 	bcm2835_thermal_debugfs(pdev);
 
 	return 0;
-err_tz:
-	devm_thermal_of_zone_unregister(&pdev->dev, tz);
-err_clk:
-	clk_disable_unprepare(data->clk);
-
-	return err;
 }
 
 static void bcm2835_thermal_remove(struct platform_device *pdev)
@@ -287,7 +277,6 @@ static void bcm2835_thermal_remove(struct platform_device *pdev)
 	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
 
 	debugfs_remove_recursive(data->debugfsdir);
-	clk_disable_unprepare(data->clk);
 }
 
 static struct platform_driver bcm2835_thermal_driver = {
-- 
2.43.0

[PATCH 6.6 013/121] sysctl: allow change system v ipc sysctls inside ipc namespace

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Gladkov <legion@kernel.org>

[ Upstream commit 50ec499b9a43e46200c9f7b7d723ab2e4af540b3 ]

Patch series "Allow to change ipc/mq sysctls inside ipc namespace", v3.

Right now ipc and mq limits count as per ipc namespace, but only real root
can change them.  By default, the current values of these limits are such
that it can only be reduced.  Since only root can change the values, it is
impossible to reduce these limits in the rootless container.

We can allow limit changes within ipc namespace because mq parameters are
limited by RLIMIT_MSGQUEUE and ipc parameters are not limited to anything
other than cgroups.

This patch (of 3):

Rootless containers are not allowed to modify kernel IPC parameters.

All default limits are set to such high values that in fact there are no
limits at all.  All limits are not inherited and are initialized to
default values when a new ipc_namespace is created.

For new ipc_namespace:

size_t       ipc_ns.shm_ctlmax = SHMMAX; // (ULONG_MAX - (1UL << 24))
size_t       ipc_ns.shm_ctlall = SHMALL; // (ULONG_MAX - (1UL << 24))
int          ipc_ns.shm_ctlmni = IPCMNI; // (1 << 15)
int          ipc_ns.shm_rmid_forced = 0;
unsigned int ipc_ns.msg_ctlmax = MSGMAX; // 8192
unsigned int ipc_ns.msg_ctlmni = MSGMNI; // 32000
unsigned int ipc_ns.msg_ctlmnb = MSGMNB; // 16384

The shm_tot (total amount of shared pages) has also ceased to be global,
it is located in ipc_namespace and is not inherited from anywhere.

In such conditions, it cannot be said that these limits limit anything.
The real limiter for them is cgroups.

If we allow rootless containers to change these parameters, then it can
only be reduced.

Link: https://lkml.kernel.org/r/cover.1705333426.git.legion@kernel.org
Link: https://lkml.kernel.org/r/d2f4603305cbfed58a24755aa61d027314b73a45.1705333426.git.legion@kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/e2d84d3ec0172cfff759e6065da84ce0cc2736f8.1663756794.git.legion@kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Granados <joel.granados@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 ipc/ipc_sysctl.c | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index 8c62e443f78b3..01c4a50d22b2d 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -14,6 +14,7 @@
 #include <linux/ipc_namespace.h>
 #include <linux/msg.h>
 #include <linux/slab.h>
+#include <linux/cred.h>
 #include "util.h"
 
 static int proc_ipc_dointvec_minmax_orphans(struct ctl_table *table, int write,
@@ -190,25 +191,57 @@ static int set_is_seen(struct ctl_table_set *set)
 	return &current->nsproxy->ipc_ns->ipc_set == set;
 }
 
+static void ipc_set_ownership(struct ctl_table_header *head,
+			      struct ctl_table *table,
+			      kuid_t *uid, kgid_t *gid)
+{
+	struct ipc_namespace *ns =
+		container_of(head->set, struct ipc_namespace, ipc_set);
+
+	kuid_t ns_root_uid = make_kuid(ns->user_ns, 0);
+	kgid_t ns_root_gid = make_kgid(ns->user_ns, 0);
+
+	*uid = uid_valid(ns_root_uid) ? ns_root_uid : GLOBAL_ROOT_UID;
+	*gid = gid_valid(ns_root_gid) ? ns_root_gid : GLOBAL_ROOT_GID;
+}
+
 static int ipc_permissions(struct ctl_table_header *head, struct ctl_table *table)
 {
 	int mode = table->mode;
 
 #ifdef CONFIG_CHECKPOINT_RESTORE
-	struct ipc_namespace *ns = current->nsproxy->ipc_ns;
+	struct ipc_namespace *ns =
+		container_of(head->set, struct ipc_namespace, ipc_set);
 
 	if (((table->data == &ns->ids[IPC_SEM_IDS].next_id) ||
 	     (table->data == &ns->ids[IPC_MSG_IDS].next_id) ||
 	     (table->data == &ns->ids[IPC_SHM_IDS].next_id)) &&
 	    checkpoint_restore_ns_capable(ns->user_ns))
 		mode = 0666;
+	else
 #endif
-	return mode;
+	{
+		kuid_t ns_root_uid;
+		kgid_t ns_root_gid;
+
+		ipc_set_ownership(head, table, &ns_root_uid, &ns_root_gid);
+
+		if (uid_eq(current_euid(), ns_root_uid))
+			mode >>= 6;
+
+		else if (in_egroup_p(ns_root_gid))
+			mode >>= 3;
+	}
+
+	mode &= 7;
+
+	return (mode << 6) | (mode << 3) | mode;
 }
 
 static struct ctl_table_root set_root = {
 	.lookup = set_lookup,
 	.permissions = ipc_permissions,
+	.set_ownership = ipc_set_ownership,
 };
 
 bool setup_ipc_sysctls(struct ipc_namespace *ns)
-- 
2.43.0

[PATCH 6.6 014/121] sysctl: allow to change limits for posix messages queues

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Gladkov <legion@kernel.org>

[ Upstream commit f9436a5d0497f759330d07e1189565edd4456be8 ]

All parameters of posix messages queues (queues_max/msg_max/msgsize_max)
end up being limited by RLIMIT_MSGQUEUE.  The code in mqueue_get_inode is
where that limiting happens.

The RLIMIT_MSGQUEUE is bound to the user namespace and is counted
hierarchically.

We can allow root in the user namespace to modify the posix messages
queues parameters.

Link: https://lkml.kernel.org/r/6ad67f23d1459a4f4339f74aa73bac0ecf3995e1.1705333426.git.legion@kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/7eb21211c8622e91d226e63416b1b93c079f60ee.1663756794.git.legion@kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joel Granados <joel.granados@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 ipc/mq_sysctl.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index ebb5ed81c151a..21fba3a6edaf7 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -12,6 +12,7 @@
 #include <linux/stat.h>
 #include <linux/capability.h>
 #include <linux/slab.h>
+#include <linux/cred.h>
 
 static int msg_max_limit_min = MIN_MSGMAX;
 static int msg_max_limit_max = HARD_MSGMAX;
@@ -76,8 +77,43 @@ static int set_is_seen(struct ctl_table_set *set)
 	return &current->nsproxy->ipc_ns->mq_set == set;
 }
 
+static void mq_set_ownership(struct ctl_table_header *head,
+			     struct ctl_table *table,
+			     kuid_t *uid, kgid_t *gid)
+{
+	struct ipc_namespace *ns =
+		container_of(head->set, struct ipc_namespace, mq_set);
+
+	kuid_t ns_root_uid = make_kuid(ns->user_ns, 0);
+	kgid_t ns_root_gid = make_kgid(ns->user_ns, 0);
+
+	*uid = uid_valid(ns_root_uid) ? ns_root_uid : GLOBAL_ROOT_UID;
+	*gid = gid_valid(ns_root_gid) ? ns_root_gid : GLOBAL_ROOT_GID;
+}
+
+static int mq_permissions(struct ctl_table_header *head, struct ctl_table *table)
+{
+	int mode = table->mode;
+	kuid_t ns_root_uid;
+	kgid_t ns_root_gid;
+
+	mq_set_ownership(head, table, &ns_root_uid, &ns_root_gid);
+
+	if (uid_eq(current_euid(), ns_root_uid))
+		mode >>= 6;
+
+	else if (in_egroup_p(ns_root_gid))
+		mode >>= 3;
+
+	mode &= 7;
+
+	return (mode << 6) | (mode << 3) | mode;
+}
+
 static struct ctl_table_root set_root = {
 	.lookup = set_lookup,
+	.permissions = mq_permissions,
+	.set_ownership = mq_set_ownership,
 };
 
 bool setup_mq_sysctls(struct ipc_namespace *ns)
-- 
2.43.0

[PATCH 6.6 015/121] sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit 520713a93d550406dae14d49cdb8778d70cecdfd ]

Remove the 'table' argument from set_ownership as it is never used. This
change is a step towards putting "struct ctl_table" into .rodata and
eventually having sysctl core only use "const struct ctl_table".

The patch was created with the following coccinelle script:

  @@
  identifier func, head, table, uid, gid;
  @@

  void func(
    struct ctl_table_header *head,
  - struct ctl_table *table,
    kuid_t *uid, kgid_t *gid)
  { ... }

No additional occurrences of 'set_ownership' were found after doing a
tree-wide search.

Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/proc_sysctl.c  | 2 +-
 include/linux/sysctl.h | 1 -
 ipc/ipc_sysctl.c       | 3 +--
 ipc/mq_sysctl.c        | 3 +--
 net/sysctl_net.c       | 1 -
 5 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 5b5cdc747cef3..cec67e6a6678f 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -481,7 +481,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb,
 	}
 
 	if (root->set_ownership)
-		root->set_ownership(head, table, &inode->i_uid, &inode->i_gid);
+		root->set_ownership(head, &inode->i_uid, &inode->i_gid);
 	else {
 		inode->i_uid = GLOBAL_ROOT_UID;
 		inode->i_gid = GLOBAL_ROOT_GID;
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 61b40ea81f4d3..698a71422a14b 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -205,7 +205,6 @@ struct ctl_table_root {
 	struct ctl_table_set default_set;
 	struct ctl_table_set *(*lookup)(struct ctl_table_root *root);
 	void (*set_ownership)(struct ctl_table_header *head,
-			      struct ctl_table *table,
 			      kuid_t *uid, kgid_t *gid);
 	int (*permissions)(struct ctl_table_header *head, struct ctl_table *table);
 };
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index 01c4a50d22b2d..b2f39a86f4734 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -192,7 +192,6 @@ static int set_is_seen(struct ctl_table_set *set)
 }
 
 static void ipc_set_ownership(struct ctl_table_header *head,
-			      struct ctl_table *table,
 			      kuid_t *uid, kgid_t *gid)
 {
 	struct ipc_namespace *ns =
@@ -224,7 +223,7 @@ static int ipc_permissions(struct ctl_table_header *head, struct ctl_table *tabl
 		kuid_t ns_root_uid;
 		kgid_t ns_root_gid;
 
-		ipc_set_ownership(head, table, &ns_root_uid, &ns_root_gid);
+		ipc_set_ownership(head, &ns_root_uid, &ns_root_gid);
 
 		if (uid_eq(current_euid(), ns_root_uid))
 			mode >>= 6;
diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index 21fba3a6edaf7..6bb1c5397c69b 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -78,7 +78,6 @@ static int set_is_seen(struct ctl_table_set *set)
 }
 
 static void mq_set_ownership(struct ctl_table_header *head,
-			     struct ctl_table *table,
 			     kuid_t *uid, kgid_t *gid)
 {
 	struct ipc_namespace *ns =
@@ -97,7 +96,7 @@ static int mq_permissions(struct ctl_table_header *head, struct ctl_table *table
 	kuid_t ns_root_uid;
 	kgid_t ns_root_gid;
 
-	mq_set_ownership(head, table, &ns_root_uid, &ns_root_gid);
+	mq_set_ownership(head, &ns_root_uid, &ns_root_gid);
 
 	if (uid_eq(current_euid(), ns_root_uid))
 		mode >>= 6;
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index 051ed5f6fc937..a0a7a79991f9f 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -54,7 +54,6 @@ static int net_ctl_permissions(struct ctl_table_header *head,
 }
 
 static void net_ctl_set_ownership(struct ctl_table_header *head,
-				  struct ctl_table *table,
 				  kuid_t *uid, kgid_t *gid)
 {
 	struct net *net = container_of(head->set, struct net, sysctls);
-- 
2.43.0

[PATCH 6.6 016/121] sysctl: always initialize i_uid/i_gid

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit 98ca62ba9e2be5863c7d069f84f7166b45a5b2f4 ]

Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.

Commit 5ec27ec735ba ("fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.

Fixes: 5ec27ec735ba ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/proc_sysctl.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index cec67e6a6678f..071a71eb1a2d4 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -480,12 +480,10 @@ static struct inode *proc_sys_make_inode(struct super_block *sb,
 			make_empty_dir_inode(inode);
 	}
 
+	inode->i_uid = GLOBAL_ROOT_UID;
+	inode->i_gid = GLOBAL_ROOT_GID;
 	if (root->set_ownership)
 		root->set_ownership(head, &inode->i_uid, &inode->i_gid);
-	else {
-		inode->i_uid = GLOBAL_ROOT_UID;
-		inode->i_gid = GLOBAL_ROOT_GID;
-	}
 
 	return inode;
 }
-- 
2.43.0

[PATCH 6.6 017/121] ext4: refactor ext4_da_map_blocks()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit 3fcc2b887a1ba4c1f45319cd8c54daa263ecbc36 ]

Refactor and cleanup ext4_da_map_blocks(), reduce some unnecessary
parameters and branches, no logic changes.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 39 +++++++++++++++++----------------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d5eb8d44c6c81..b8eab9cf36b98 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1706,7 +1706,6 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 	/* Lookup extent status tree firstly */
 	if (ext4_es_lookup_extent(inode, iblock, NULL, &es)) {
 		if (ext4_es_is_hole(&es)) {
-			retval = 0;
 			down_read(&EXT4_I(inode)->i_data_sem);
 			goto add_delayed;
 		}
@@ -1751,26 +1750,9 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 		retval = ext4_ext_map_blocks(NULL, inode, map, 0);
 	else
 		retval = ext4_ind_map_blocks(NULL, inode, map, 0);
-
-add_delayed:
-	if (retval == 0) {
-		int ret;
-
-		/*
-		 * XXX: __block_prepare_write() unmaps passed block,
-		 * is it OK?
-		 */
-
-		ret = ext4_insert_delayed_block(inode, map->m_lblk);
-		if (ret != 0) {
-			retval = ret;
-			goto out_unlock;
-		}
-
-		map_bh(bh, inode->i_sb, invalid_block);
-		set_buffer_new(bh);
-		set_buffer_delay(bh);
-	} else if (retval > 0) {
+	if (retval < 0)
+		goto out_unlock;
+	if (retval > 0) {
 		unsigned int status;
 
 		if (unlikely(retval != map->m_len)) {
@@ -1785,11 +1767,24 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 				EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
 		ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
 				      map->m_pblk, status);
+		goto out_unlock;
 	}
 
+add_delayed:
+	/*
+	 * XXX: __block_prepare_write() unmaps passed block,
+	 * is it OK?
+	 */
+	retval = ext4_insert_delayed_block(inode, map->m_lblk);
+	if (retval)
+		goto out_unlock;
+
+	map_bh(bh, inode->i_sb, invalid_block);
+	set_buffer_new(bh);
+	set_buffer_delay(bh);
+
 out_unlock:
 	up_read((&EXT4_I(inode)->i_data_sem));
-
 	return retval;
 }
 
-- 
2.43.0

[PATCH 6.6 018/121] ext4: convert to exclusive lock while inserting delalloc extents

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit acf795dc161f3cf481db20f05db4250714e375e5 ]

ext4_da_map_blocks() only hold i_data_sem in shared mode and i_rwsem
when inserting delalloc extents, it could be raced by another querying
path of ext4_map_blocks() without i_rwsem, .e.g buffered read path.
Suppose we buffered read a file containing just a hole, and without any
cached extents tree, then it is raced by another delayed buffered write
to the same area or the near area belongs to the same hole, and the new
delalloc extent could be overwritten to a hole extent.

 pread()                           pwrite()
  filemap_read_folio()
   ext4_mpage_readpages()
    ext4_map_blocks()
     down_read(i_data_sem)
     ext4_ext_determine_hole()
     //find hole
     ext4_ext_put_gap_in_cache()
      ext4_es_find_extent_range()
      //no delalloc extent
                                    ext4_da_map_blocks()
                                     down_read(i_data_sem)
                                     ext4_insert_delayed_block()
                                     //insert delalloc extent
      ext4_es_insert_extent()
      //overwrite delalloc extent to hole

This race could lead to inconsistent delalloc extents tree and
incorrect reserved space counter. Fix this by converting to hold
i_data_sem in exclusive mode when adding a new delalloc extent in
ext4_da_map_blocks().

Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index b8eab9cf36b98..c8a1db2164dfb 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1705,10 +1705,8 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 
 	/* Lookup extent status tree firstly */
 	if (ext4_es_lookup_extent(inode, iblock, NULL, &es)) {
-		if (ext4_es_is_hole(&es)) {
-			down_read(&EXT4_I(inode)->i_data_sem);
+		if (ext4_es_is_hole(&es))
 			goto add_delayed;
-		}
 
 		/*
 		 * Delayed extent could be allocated by fallocate.
@@ -1750,8 +1748,10 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 		retval = ext4_ext_map_blocks(NULL, inode, map, 0);
 	else
 		retval = ext4_ind_map_blocks(NULL, inode, map, 0);
-	if (retval < 0)
-		goto out_unlock;
+	if (retval < 0) {
+		up_read(&EXT4_I(inode)->i_data_sem);
+		return retval;
+	}
 	if (retval > 0) {
 		unsigned int status;
 
@@ -1767,24 +1767,21 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 				EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
 		ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
 				      map->m_pblk, status);
-		goto out_unlock;
+		up_read(&EXT4_I(inode)->i_data_sem);
+		return retval;
 	}
+	up_read(&EXT4_I(inode)->i_data_sem);
 
 add_delayed:
-	/*
-	 * XXX: __block_prepare_write() unmaps passed block,
-	 * is it OK?
-	 */
+	down_write(&EXT4_I(inode)->i_data_sem);
 	retval = ext4_insert_delayed_block(inode, map->m_lblk);
+	up_write(&EXT4_I(inode)->i_data_sem);
 	if (retval)
-		goto out_unlock;
+		return retval;
 
 	map_bh(bh, inode->i_sb, invalid_block);
 	set_buffer_new(bh);
 	set_buffer_delay(bh);
-
-out_unlock:
-	up_read((&EXT4_I(inode)->i_data_sem));
 	return retval;
 }
 
-- 
2.43.0

[PATCH 6.6 019/121] ext4: factor out a common helper to query extent map

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit 8e4e5cdf2fdeb99445a468b6b6436ad79b9ecb30 ]

Factor out a new common helper ext4_map_query_blocks() from the
ext4_da_map_blocks(), it query and return the extent map status on the
inode's extent path, no logic changes.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb3b ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 57 +++++++++++++++++++++++++++----------------------
 1 file changed, 32 insertions(+), 25 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c8a1db2164dfb..b8b2f731f1d0e 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -453,6 +453,35 @@ static void ext4_map_blocks_es_recheck(handle_t *handle,
 }
 #endif /* ES_AGGRESSIVE_TEST */
 
+static int ext4_map_query_blocks(handle_t *handle, struct inode *inode,
+				 struct ext4_map_blocks *map)
+{
+	unsigned int status;
+	int retval;
+
+	if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+		retval = ext4_ext_map_blocks(handle, inode, map, 0);
+	else
+		retval = ext4_ind_map_blocks(handle, inode, map, 0);
+
+	if (retval <= 0)
+		return retval;
+
+	if (unlikely(retval != map->m_len)) {
+		ext4_warning(inode->i_sb,
+			     "ES len assertion failed for inode "
+			     "%lu: retval %d != map->m_len %d",
+			     inode->i_ino, retval, map->m_len);
+		WARN_ON(1);
+	}
+
+	status = map->m_flags & EXT4_MAP_UNWRITTEN ?
+			EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
+	ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
+			      map->m_pblk, status);
+	return retval;
+}
+
 /*
  * The ext4_map_blocks() function tries to look up the requested blocks,
  * and returns if the blocks are already mapped.
@@ -1744,33 +1773,11 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 	down_read(&EXT4_I(inode)->i_data_sem);
 	if (ext4_has_inline_data(inode))
 		retval = 0;
-	else if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
-		retval = ext4_ext_map_blocks(NULL, inode, map, 0);
 	else
-		retval = ext4_ind_map_blocks(NULL, inode, map, 0);
-	if (retval < 0) {
-		up_read(&EXT4_I(inode)->i_data_sem);
-		return retval;
-	}
-	if (retval > 0) {
-		unsigned int status;
-
-		if (unlikely(retval != map->m_len)) {
-			ext4_warning(inode->i_sb,
-				     "ES len assertion failed for inode "
-				     "%lu: retval %d != map->m_len %d",
-				     inode->i_ino, retval, map->m_len);
-			WARN_ON(1);
-		}
-
-		status = map->m_flags & EXT4_MAP_UNWRITTEN ?
-				EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
-		ext4_es_insert_extent(inode, map->m_lblk, map->m_len,
-				      map->m_pblk, status);
-		up_read(&EXT4_I(inode)->i_data_sem);
-		return retval;
-	}
+		retval = ext4_map_query_blocks(NULL, inode, map);
 	up_read(&EXT4_I(inode)->i_data_sem);
+	if (retval)
+		return retval;
 
 add_delayed:
 	down_write(&EXT4_I(inode)->i_data_sem);
-- 
2.43.0

[PATCH 6.6 020/121] ext4: check the extent status again before inserting delalloc block

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit 0ea6560abb3bac1ffcfa4bf6b2c4d344fdc27b3c ]

ext4_da_map_blocks looks up for any extent entry in the extent status
tree (w/o i_data_sem) and then the looks up for any ondisk extent
mapping (with i_data_sem in read mode).

If it finds a hole in the extent status tree or if it couldn't find any
entry at all, it then takes the i_data_sem in write mode to add a da
entry into the extent status tree. This can actually race with page
mkwrite & fallocate path.

Note that this is ok between
1. ext4 buffered-write path v/s ext4_page_mkwrite(), because of the
   folio lock
2. ext4 buffered write path v/s ext4 fallocate because of the inode
   lock.

But this can race between ext4_page_mkwrite() & ext4 fallocate path

ext4_page_mkwrite()             ext4_fallocate()
 block_page_mkwrite()
  ext4_da_map_blocks()
   //find hole in extent status tree
                                 ext4_alloc_file_blocks()
                                  ext4_map_blocks()
                                   //allocate block and unwritten extent
   ext4_insert_delayed_block()
    ext4_da_reserve_space()
     //reserve one more block
    ext4_es_insert_delayed_block()
     //drop unwritten extent and add delayed extent by mistake

Then, the delalloc extent is wrong until writeback and the extra
reserved block can't be released any more and it triggers below warning:

 EXT4-fs (pmem2): Inode 13 (00000000bbbd4d23): i_reserved_data_blocks(1) not cleared!

Fix the problem by looking up extent status tree again while the
i_data_sem is held in write mode. If it still can't find any entry, then
we insert a new da entry into the extent status tree.

Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240517124005.347221-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index b8b2f731f1d0e..cef119a2476bb 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1737,6 +1737,7 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 		if (ext4_es_is_hole(&es))
 			goto add_delayed;
 
+found:
 		/*
 		 * Delayed extent could be allocated by fallocate.
 		 * So we need to check it.
@@ -1781,6 +1782,26 @@ static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
 
 add_delayed:
 	down_write(&EXT4_I(inode)->i_data_sem);
+	/*
+	 * Page fault path (ext4_page_mkwrite does not take i_rwsem)
+	 * and fallocate path (no folio lock) can race. Make sure we
+	 * lookup the extent status tree here again while i_data_sem
+	 * is held in write mode, before inserting a new da entry in
+	 * the extent status tree.
+	 */
+	if (ext4_es_lookup_extent(inode, iblock, NULL, &es)) {
+		if (!ext4_es_is_hole(&es)) {
+			up_write(&EXT4_I(inode)->i_data_sem);
+			goto found;
+		}
+	} else if (!ext4_has_inline_data(inode)) {
+		retval = ext4_map_query_blocks(NULL, inode, map);
+		if (retval) {
+			up_write(&EXT4_I(inode)->i_data_sem);
+			return retval;
+		}
+	}
+
 	retval = ext4_insert_delayed_block(inode, map->m_lblk);
 	up_write(&EXT4_I(inode)->i_data_sem);
 	if (retval)
-- 
2.43.0

[PATCH 6.6 021/121] cpufreq: qcom-nvmem: Simplify driver data allocation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>

[ Upstream commit 2a5d46c3ad6b0e62d2b04356ad999d504fb564e0 ]

Simplify the allocation and cleanup of driver data by using devm
together with a flexible array. Prepare for adding additional per-CPU
data by defining a struct qcom_cpufreq_drv_cpu instead of storing the
opp_tokens directly.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: d01c84b97f19 ("cpufreq: qcom-nvmem: fix memory leaks in probe error paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 49 ++++++++++------------------
 1 file changed, 18 insertions(+), 31 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 84d7033e5efe8..03586fee15aac 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -40,10 +40,14 @@ struct qcom_cpufreq_match_data {
 	const char **genpd_names;
 };
 
+struct qcom_cpufreq_drv_cpu {
+	int opp_token;
+};
+
 struct qcom_cpufreq_drv {
-	int *opp_tokens;
 	u32 versions;
 	const struct qcom_cpufreq_match_data *data;
+	struct qcom_cpufreq_drv_cpu cpus[];
 };
 
 static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
@@ -243,42 +247,32 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+	drv = devm_kzalloc(&pdev->dev, struct_size(drv, cpus, num_possible_cpus()),
+		           GFP_KERNEL);
 	if (!drv)
 		return -ENOMEM;
 
 	match = pdev->dev.platform_data;
 	drv->data = match->data;
-	if (!drv->data) {
-		ret = -ENODEV;
-		goto free_drv;
-	}
+	if (!drv->data)
+		return -ENODEV;
 
 	if (drv->data->get_version) {
 		speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-		if (IS_ERR(speedbin_nvmem)) {
-			ret = dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem),
-					    "Could not get nvmem cell\n");
-			goto free_drv;
-		}
+		if (IS_ERR(speedbin_nvmem))
+			return dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem),
+					     "Could not get nvmem cell\n");
 
 		ret = drv->data->get_version(cpu_dev,
 							speedbin_nvmem, &pvs_name, drv);
 		if (ret) {
 			nvmem_cell_put(speedbin_nvmem);
-			goto free_drv;
+			return ret;
 		}
 		nvmem_cell_put(speedbin_nvmem);
 	}
 	of_node_put(np);
 
-	drv->opp_tokens = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tokens),
-				  GFP_KERNEL);
-	if (!drv->opp_tokens) {
-		ret = -ENOMEM;
-		goto free_drv;
-	}
-
 	for_each_possible_cpu(cpu) {
 		struct dev_pm_opp_config config = {
 			.supported_hw = NULL,
@@ -304,9 +298,9 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 		}
 
 		if (config.supported_hw || config.genpd_names) {
-			drv->opp_tokens[cpu] = dev_pm_opp_set_config(cpu_dev, &config);
-			if (drv->opp_tokens[cpu] < 0) {
-				ret = drv->opp_tokens[cpu];
+			drv->cpus[cpu].opp_token = dev_pm_opp_set_config(cpu_dev, &config);
+			if (drv->cpus[cpu].opp_token < 0) {
+				ret = drv->cpus[cpu].opp_token;
 				dev_err(cpu_dev, "Failed to set OPP config\n");
 				goto free_opp;
 			}
@@ -325,11 +319,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 
 free_opp:
 	for_each_possible_cpu(cpu)
-		dev_pm_opp_clear_config(drv->opp_tokens[cpu]);
-	kfree(drv->opp_tokens);
-free_drv:
-	kfree(drv);
-
+		dev_pm_opp_clear_config(drv->cpus[cpu].opp_token);
 	return ret;
 }
 
@@ -341,10 +331,7 @@ static void qcom_cpufreq_remove(struct platform_device *pdev)
 	platform_device_unregister(cpufreq_dt_pdev);
 
 	for_each_possible_cpu(cpu)
-		dev_pm_opp_clear_config(drv->opp_tokens[cpu]);
-
-	kfree(drv->opp_tokens);
-	kfree(drv);
+		dev_pm_opp_clear_config(drv->cpus[cpu].opp_token);
 }
 
 static struct platform_driver qcom_cpufreq_driver = {
-- 
2.43.0

[PATCH 6.6 022/121] cpufreq: qcom-nvmem: fix memory leaks in probe error paths

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

[ Upstream commit d01c84b97f19f1137211e90b0a910289a560019e ]

The code refactoring added new error paths between the np device node
allocation and the call to of_node_put(), which leads to memory leaks if
any of those errors occur.

Add the missing of_node_put() in the error paths that require it.

Cc: stable@vger.kernel.org
Fixes: 57f2f8b4aa0c ("cpufreq: qcom: Refactor the driver to make it easier to extend")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/qcom-cpufreq-nvmem.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 03586fee15aac..ef51dfb39baa9 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -249,23 +249,30 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 
 	drv = devm_kzalloc(&pdev->dev, struct_size(drv, cpus, num_possible_cpus()),
 		           GFP_KERNEL);
-	if (!drv)
+	if (!drv) {
+		of_node_put(np);
 		return -ENOMEM;
+	}
 
 	match = pdev->dev.platform_data;
 	drv->data = match->data;
-	if (!drv->data)
+	if (!drv->data) {
+		of_node_put(np);
 		return -ENODEV;
+	}
 
 	if (drv->data->get_version) {
 		speedbin_nvmem = of_nvmem_cell_get(np, NULL);
-		if (IS_ERR(speedbin_nvmem))
+		if (IS_ERR(speedbin_nvmem)) {
+			of_node_put(np);
 			return dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem),
 					     "Could not get nvmem cell\n");
+		}
 
 		ret = drv->data->get_version(cpu_dev,
 							speedbin_nvmem, &pvs_name, drv);
 		if (ret) {
+			of_node_put(np);
 			nvmem_cell_put(speedbin_nvmem);
 			return ret;
 		}
-- 
2.43.0

[PATCH 6.6 023/121] leds: trigger: Remove unused function led_trigger_rename_static()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit c82a1662d4548c454de5343b88f69b9fc82266b3 ]

This function was added with a8df7b1ab70b ("leds: add led_trigger_rename
function") 11 yrs ago, but it has no users. So remove it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d90f30be-f661-4db7-b0b5-d09d07a78a68@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: ab477b766edd ("leds: triggers: Flush pending brightness before activating trigger")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-triggers.c | 13 -------------
 include/linux/leds.h        | 17 -----------------
 2 files changed, 30 deletions(-)

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 4f5829b726a75..081acf1f345b3 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -269,19 +269,6 @@ void led_trigger_set_default(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_trigger_set_default);
 
-void led_trigger_rename_static(const char *name, struct led_trigger *trig)
-{
-	/* new name must be on a temporary string to prevent races */
-	BUG_ON(name == trig->name);
-
-	down_write(&triggers_list_lock);
-	/* this assumes that trig->name was originaly allocated to
-	 * non constant storage */
-	strcpy((char *)trig->name, name);
-	up_write(&triggers_list_lock);
-}
-EXPORT_SYMBOL_GPL(led_trigger_rename_static);
-
 /* LED Trigger Interface */
 
 int led_trigger_register(struct led_trigger *trig)
diff --git a/include/linux/leds.h b/include/linux/leds.h
index aa16dc2a8230f..6a4973feecd65 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -527,23 +527,6 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 	return led_cdev->trigger_data;
 }
 
-/**
- * led_trigger_rename_static - rename a trigger
- * @name: the new trigger name
- * @trig: the LED trigger to rename
- *
- * Change a LED trigger name by copying the string passed in
- * name into current trigger name, which MUST be large
- * enough for the new string.
- *
- * Note that name must NOT point to the same string used
- * during LED registration, as that could lead to races.
- *
- * This is meant to be used on triggers with statically
- * allocated name.
- */
-void led_trigger_rename_static(const char *name, struct led_trigger *trig);
-
 #define module_led_trigger(__led_trigger) \
 	module_driver(__led_trigger, led_trigger_register, \
 		      led_trigger_unregister)
-- 
2.43.0

[PATCH 6.6 024/121] leds: trigger: Store brightness set by led_trigger_event()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 822c91e72eac568ed8d83765634f00decb45666c ]

If a simple trigger is assigned to a LED, then the LED may be off until
the next led_trigger_event() call. This may be an issue for simple
triggers with rare led_trigger_event() calls, e.g. power supply
charging indicators (drivers/power/supply/power_supply_leds.c).
Therefore persist the brightness value of the last led_trigger_event()
call and use this value if the trigger is assigned to a LED.
In addition add a getter for the trigger brightness value.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b1358b25-3f30-458d-8240-5705ae007a8a@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: ab477b766edd ("leds: triggers: Flush pending brightness before activating trigger")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-triggers.c |  6 ++++--
 include/linux/leds.h        | 15 +++++++++++++++
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 081acf1f345b3..38f7896f374f6 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -194,11 +194,11 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 		spin_unlock(&trig->leddev_list_lock);
 		led_cdev->trigger = trig;
 
+		ret = 0;
 		if (trig->activate)
 			ret = trig->activate(led_cdev);
 		else
-			ret = 0;
-
+			led_set_brightness(led_cdev, trig->brightness);
 		if (ret)
 			goto err_activate;
 
@@ -373,6 +373,8 @@ void led_trigger_event(struct led_trigger *trig,
 	if (!trig)
 		return;
 
+	trig->brightness = brightness;
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(led_cdev, &trig->led_cdevs, trig_list)
 		led_set_brightness(led_cdev, brightness);
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 6a4973feecd65..d3056bc6f0a1a 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -474,6 +474,9 @@ struct led_trigger {
 	int		(*activate)(struct led_classdev *led_cdev);
 	void		(*deactivate)(struct led_classdev *led_cdev);
 
+	/* Brightness set by led_trigger_event */
+	enum led_brightness brightness;
+
 	/* LED-private triggers have this set */
 	struct led_hw_trigger_type *trigger_type;
 
@@ -527,6 +530,12 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 	return led_cdev->trigger_data;
 }
 
+static inline enum led_brightness
+led_trigger_get_brightness(const struct led_trigger *trigger)
+{
+	return trigger ? trigger->brightness : LED_OFF;
+}
+
 #define module_led_trigger(__led_trigger) \
 	module_driver(__led_trigger, led_trigger_register, \
 		      led_trigger_unregister)
@@ -563,6 +572,12 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
 	return NULL;
 }
 
+static inline enum led_brightness
+led_trigger_get_brightness(const struct led_trigger *trigger)
+{
+	return LED_OFF;
+}
+
 #endif /* CONFIG_LEDS_TRIGGERS */
 
 /* Trigger specific enum */
-- 
2.43.0

[PATCH 6.6 025/121] leds: trigger: Call synchronize_rcu() before calling trig->activate()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b1bbd20f35e19774ea01989320495e09ac44fba3 ]

Some triggers call led_trigger_event() from their activate() callback
to initialize the brightness of the LED for which the trigger is being
activated.

In order for the LED's initial state to be set correctly this requires that
the led_trigger_event() call uses the new version of trigger->led_cdevs,
which has the new LED.

AFAICT led_trigger_event() will always use the new version when it is
running on the same CPU as where the list_add_tail_rcu() call was made,
which is why the missing synchronize_rcu() has not lead to bug reports.
But if activate() is pre-empted, sleeps or uses a worker then
the led_trigger_event() call may run on another CPU which may still use
the old trigger->led_cdevs list.

Add a synchronize_rcu() call to ensure that any led_trigger_event() calls
done from activate() always use the new list.

Triggers using led_trigger_event() from their activate() callback are:
net/bluetooth/leds.c, net/rfkill/core.c and drivers/tty/vt/keyboard.c.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531120124.75662-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: ab477b766edd ("leds: triggers: Flush pending brightness before activating trigger")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-triggers.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 38f7896f374f6..baa5365c26047 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -194,6 +194,13 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 		spin_unlock(&trig->leddev_list_lock);
 		led_cdev->trigger = trig;
 
+		/*
+		 * Some activate() calls use led_trigger_event() to initialize
+		 * the brightness of the LED for which the trigger is being set.
+		 * Ensure the led_cdev is visible on trig->led_cdevs for this.
+		 */
+		synchronize_rcu();
+
 		ret = 0;
 		if (trig->activate)
 			ret = trig->activate(led_cdev);
-- 
2.43.0

[PATCH 6.6 026/121] leds: triggers: Flush pending brightness before activating trigger

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit ab477b766edd3bfb6321a6e3df4c790612613fae ]

The race fixed in timer_trig_activate() between a blocking
set_brightness() call and trigger->activate() can affect any trigger.
So move the call to flush_work() into led_trigger_set() where it can
avoid the race for all triggers.

Fixes: 0db37915d912 ("leds: avoid races with workqueue")
Fixes: 8c0f693c6eff ("leds: avoid flush_work in atomic context")
Cc: stable@vger.kernel.org
Tested-by: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240613-led-trigger-flush-v2-1-f4f970799d77@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-triggers.c          | 6 ++++++
 drivers/leds/trigger/ledtrig-timer.c | 5 -----
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index baa5365c26047..72fd2fe8f6fe8 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -201,6 +201,12 @@ int led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trig)
 		 */
 		synchronize_rcu();
 
+		/*
+		 * If "set brightness to 0" is pending in workqueue,
+		 * we don't want that to be reordered after ->activate()
+		 */
+		flush_work(&led_cdev->set_brightness_work);
+
 		ret = 0;
 		if (trig->activate)
 			ret = trig->activate(led_cdev);
diff --git a/drivers/leds/trigger/ledtrig-timer.c b/drivers/leds/trigger/ledtrig-timer.c
index b4688d1d9d2b2..1d213c999d40a 100644
--- a/drivers/leds/trigger/ledtrig-timer.c
+++ b/drivers/leds/trigger/ledtrig-timer.c
@@ -110,11 +110,6 @@ static int timer_trig_activate(struct led_classdev *led_cdev)
 		led_cdev->flags &= ~LED_INIT_DEFAULT_TRIGGER;
 	}
 
-	/*
-	 * If "set brightness to 0" is pending in workqueue, we don't
-	 * want that to be reordered after blink_set()
-	 */
-	flush_work(&led_cdev->set_brightness_work);
 	led_blink_set(led_cdev, &led_cdev->blink_delay_on,
 		      &led_cdev->blink_delay_off);
 
-- 
2.43.0

[PATCH 6.6 027/121] KVM: VMX: Split off vmx_onhyperv.{ch} from hyperv.{ch}

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 50a82b0eb88c108d1ebc73a97f5b81df0d5918e0 ]

hyperv.{ch} is currently a mix of stuff which is needed by both Hyper-V on
KVM and KVM on Hyper-V. As a preparation to making Hyper-V emulation
optional, put KVM-on-Hyper-V specific code into dedicated files.

No functional change intended.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: d83c36d822be ("KVM: nVMX: Add a helper to get highest pending from Posted Interrupt vector")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/Makefile           |   4 +
 arch/x86/kvm/vmx/hyperv.c       | 139 --------------------
 arch/x86/kvm/vmx/hyperv.h       | 217 ++++++++++++++++----------------
 arch/x86/kvm/vmx/vmx.c          |   1 +
 arch/x86/kvm/vmx/vmx_onhyperv.c |  36 ++++++
 arch/x86/kvm/vmx/vmx_onhyperv.h | 124 ++++++++++++++++++
 arch/x86/kvm/vmx/vmx_ops.h      |   2 +-
 7 files changed, 271 insertions(+), 252 deletions(-)
 create mode 100644 arch/x86/kvm/vmx/vmx_onhyperv.c
 create mode 100644 arch/x86/kvm/vmx/vmx_onhyperv.h

diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 80e3fe184d17e..a99ffc3f3a3fd 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -26,6 +26,10 @@ kvm-intel-y		+= vmx/vmx.o vmx/vmenter.o vmx/pmu_intel.o vmx/vmcs12.o \
 			   vmx/hyperv.o vmx/nested.o vmx/posted_intr.o
 kvm-intel-$(CONFIG_X86_SGX_KVM)	+= vmx/sgx.o
 
+ifdef CONFIG_HYPERV
+kvm-intel-y		+= vmx/vmx_onhyperv.o
+endif
+
 kvm-amd-y		+= svm/svm.o svm/vmenter.o svm/pmu.o svm/nested.o svm/avic.o \
 			   svm/sev.o svm/hyperv.o
 
diff --git a/arch/x86/kvm/vmx/hyperv.c b/arch/x86/kvm/vmx/hyperv.c
index 313b8bb5b8a7c..de13dc14fe1d2 100644
--- a/arch/x86/kvm/vmx/hyperv.c
+++ b/arch/x86/kvm/vmx/hyperv.c
@@ -13,111 +13,6 @@
 
 #define CC KVM_NESTED_VMENTER_CONSISTENCY_CHECK
 
-/*
- * Enlightened VMCSv1 doesn't support these:
- *
- *	POSTED_INTR_NV                  = 0x00000002,
- *	GUEST_INTR_STATUS               = 0x00000810,
- *	APIC_ACCESS_ADDR		= 0x00002014,
- *	POSTED_INTR_DESC_ADDR           = 0x00002016,
- *	EOI_EXIT_BITMAP0                = 0x0000201c,
- *	EOI_EXIT_BITMAP1                = 0x0000201e,
- *	EOI_EXIT_BITMAP2                = 0x00002020,
- *	EOI_EXIT_BITMAP3                = 0x00002022,
- *	GUEST_PML_INDEX			= 0x00000812,
- *	PML_ADDRESS			= 0x0000200e,
- *	VM_FUNCTION_CONTROL             = 0x00002018,
- *	EPTP_LIST_ADDRESS               = 0x00002024,
- *	VMREAD_BITMAP                   = 0x00002026,
- *	VMWRITE_BITMAP                  = 0x00002028,
- *
- *	TSC_MULTIPLIER                  = 0x00002032,
- *	PLE_GAP                         = 0x00004020,
- *	PLE_WINDOW                      = 0x00004022,
- *	VMX_PREEMPTION_TIMER_VALUE      = 0x0000482E,
- *
- * Currently unsupported in KVM:
- *	GUEST_IA32_RTIT_CTL		= 0x00002814,
- */
-#define EVMCS1_SUPPORTED_PINCTRL					\
-	(PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 PIN_BASED_EXT_INTR_MASK |					\
-	 PIN_BASED_NMI_EXITING |					\
-	 PIN_BASED_VIRTUAL_NMIS)
-
-#define EVMCS1_SUPPORTED_EXEC_CTRL					\
-	(CPU_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 CPU_BASED_HLT_EXITING |					\
-	 CPU_BASED_CR3_LOAD_EXITING |					\
-	 CPU_BASED_CR3_STORE_EXITING |					\
-	 CPU_BASED_UNCOND_IO_EXITING |					\
-	 CPU_BASED_MOV_DR_EXITING |					\
-	 CPU_BASED_USE_TSC_OFFSETTING |					\
-	 CPU_BASED_MWAIT_EXITING |					\
-	 CPU_BASED_MONITOR_EXITING |					\
-	 CPU_BASED_INVLPG_EXITING |					\
-	 CPU_BASED_RDPMC_EXITING |					\
-	 CPU_BASED_INTR_WINDOW_EXITING |				\
-	 CPU_BASED_CR8_LOAD_EXITING |					\
-	 CPU_BASED_CR8_STORE_EXITING |					\
-	 CPU_BASED_RDTSC_EXITING |					\
-	 CPU_BASED_TPR_SHADOW |						\
-	 CPU_BASED_USE_IO_BITMAPS |					\
-	 CPU_BASED_MONITOR_TRAP_FLAG |					\
-	 CPU_BASED_USE_MSR_BITMAPS |					\
-	 CPU_BASED_NMI_WINDOW_EXITING |					\
-	 CPU_BASED_PAUSE_EXITING |					\
-	 CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)
-
-#define EVMCS1_SUPPORTED_2NDEXEC					\
-	(SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |			\
-	 SECONDARY_EXEC_WBINVD_EXITING |				\
-	 SECONDARY_EXEC_ENABLE_VPID |					\
-	 SECONDARY_EXEC_ENABLE_EPT |					\
-	 SECONDARY_EXEC_UNRESTRICTED_GUEST |				\
-	 SECONDARY_EXEC_DESC |						\
-	 SECONDARY_EXEC_ENABLE_RDTSCP |					\
-	 SECONDARY_EXEC_ENABLE_INVPCID |				\
-	 SECONDARY_EXEC_ENABLE_XSAVES |					\
-	 SECONDARY_EXEC_RDSEED_EXITING |				\
-	 SECONDARY_EXEC_RDRAND_EXITING |				\
-	 SECONDARY_EXEC_TSC_SCALING |					\
-	 SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |				\
-	 SECONDARY_EXEC_PT_USE_GPA |					\
-	 SECONDARY_EXEC_PT_CONCEAL_VMX |				\
-	 SECONDARY_EXEC_BUS_LOCK_DETECTION |				\
-	 SECONDARY_EXEC_NOTIFY_VM_EXITING |				\
-	 SECONDARY_EXEC_ENCLS_EXITING)
-
-#define EVMCS1_SUPPORTED_3RDEXEC (0ULL)
-
-#define EVMCS1_SUPPORTED_VMEXIT_CTRL					\
-	(VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 VM_EXIT_SAVE_DEBUG_CONTROLS |					\
-	 VM_EXIT_ACK_INTR_ON_EXIT |					\
-	 VM_EXIT_HOST_ADDR_SPACE_SIZE |					\
-	 VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |				\
-	 VM_EXIT_SAVE_IA32_PAT |					\
-	 VM_EXIT_LOAD_IA32_PAT |					\
-	 VM_EXIT_SAVE_IA32_EFER |					\
-	 VM_EXIT_LOAD_IA32_EFER |					\
-	 VM_EXIT_CLEAR_BNDCFGS |					\
-	 VM_EXIT_PT_CONCEAL_PIP |					\
-	 VM_EXIT_CLEAR_IA32_RTIT_CTL)
-
-#define EVMCS1_SUPPORTED_VMENTRY_CTRL					\
-	(VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR |				\
-	 VM_ENTRY_LOAD_DEBUG_CONTROLS |					\
-	 VM_ENTRY_IA32E_MODE |						\
-	 VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |				\
-	 VM_ENTRY_LOAD_IA32_PAT |					\
-	 VM_ENTRY_LOAD_IA32_EFER |					\
-	 VM_ENTRY_LOAD_BNDCFGS |					\
-	 VM_ENTRY_PT_CONCEAL_PIP |					\
-	 VM_ENTRY_LOAD_IA32_RTIT_CTL)
-
-#define EVMCS1_SUPPORTED_VMFUNC (0)
-
 #define EVMCS1_OFFSET(x) offsetof(struct hv_enlightened_vmcs, x)
 #define EVMCS1_FIELD(number, name, clean_field)[ROL16(number, 6)] = \
 		{EVMCS1_OFFSET(name), clean_field}
@@ -608,40 +503,6 @@ int nested_evmcs_check_controls(struct vmcs12 *vmcs12)
 	return 0;
 }
 
-#if IS_ENABLED(CONFIG_HYPERV)
-DEFINE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
-
-/*
- * KVM on Hyper-V always uses the latest known eVMCSv1 revision, the assumption
- * is: in case a feature has corresponding fields in eVMCS described and it was
- * exposed in VMX feature MSRs, KVM is free to use it. Warn if KVM meets a
- * feature which has no corresponding eVMCS field, this likely means that KVM
- * needs to be updated.
- */
-#define evmcs_check_vmcs_conf(field, ctrl)					\
-	do {									\
-		typeof(vmcs_conf->field) unsupported;				\
-										\
-		unsupported = vmcs_conf->field & ~EVMCS1_SUPPORTED_ ## ctrl;	\
-		if (unsupported) {						\
-			pr_warn_once(#field " unsupported with eVMCS: 0x%llx\n",\
-				     (u64)unsupported);				\
-			vmcs_conf->field &= EVMCS1_SUPPORTED_ ## ctrl;		\
-		}								\
-	}									\
-	while (0)
-
-void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf)
-{
-	evmcs_check_vmcs_conf(cpu_based_exec_ctrl, EXEC_CTRL);
-	evmcs_check_vmcs_conf(pin_based_exec_ctrl, PINCTRL);
-	evmcs_check_vmcs_conf(cpu_based_2nd_exec_ctrl, 2NDEXEC);
-	evmcs_check_vmcs_conf(cpu_based_3rd_exec_ctrl, 3RDEXEC);
-	evmcs_check_vmcs_conf(vmentry_ctrl, VMENTRY_CTRL);
-	evmcs_check_vmcs_conf(vmexit_ctrl, VMEXIT_CTRL);
-}
-#endif
-
 int nested_enable_evmcs(struct kvm_vcpu *vcpu,
 			uint16_t *vmcs_version)
 {
diff --git a/arch/x86/kvm/vmx/hyperv.h b/arch/x86/kvm/vmx/hyperv.h
index 9623fe1651c48..9401dbfaea7ce 100644
--- a/arch/x86/kvm/vmx/hyperv.h
+++ b/arch/x86/kvm/vmx/hyperv.h
@@ -14,12 +14,113 @@
 #include "vmcs.h"
 #include "vmcs12.h"
 
-struct vmcs_config;
-
-#define current_evmcs ((struct hv_enlightened_vmcs *)this_cpu_read(current_vmcs))
-
 #define KVM_EVMCS_VERSION 1
 
+/*
+ * Enlightened VMCSv1 doesn't support these:
+ *
+ *	POSTED_INTR_NV                  = 0x00000002,
+ *	GUEST_INTR_STATUS               = 0x00000810,
+ *	APIC_ACCESS_ADDR		= 0x00002014,
+ *	POSTED_INTR_DESC_ADDR           = 0x00002016,
+ *	EOI_EXIT_BITMAP0                = 0x0000201c,
+ *	EOI_EXIT_BITMAP1                = 0x0000201e,
+ *	EOI_EXIT_BITMAP2                = 0x00002020,
+ *	EOI_EXIT_BITMAP3                = 0x00002022,
+ *	GUEST_PML_INDEX			= 0x00000812,
+ *	PML_ADDRESS			= 0x0000200e,
+ *	VM_FUNCTION_CONTROL             = 0x00002018,
+ *	EPTP_LIST_ADDRESS               = 0x00002024,
+ *	VMREAD_BITMAP                   = 0x00002026,
+ *	VMWRITE_BITMAP                  = 0x00002028,
+ *
+ *	TSC_MULTIPLIER                  = 0x00002032,
+ *	PLE_GAP                         = 0x00004020,
+ *	PLE_WINDOW                      = 0x00004022,
+ *	VMX_PREEMPTION_TIMER_VALUE      = 0x0000482E,
+ *
+ * Currently unsupported in KVM:
+ *	GUEST_IA32_RTIT_CTL		= 0x00002814,
+ */
+#define EVMCS1_SUPPORTED_PINCTRL					\
+	(PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 PIN_BASED_EXT_INTR_MASK |					\
+	 PIN_BASED_NMI_EXITING |					\
+	 PIN_BASED_VIRTUAL_NMIS)
+
+#define EVMCS1_SUPPORTED_EXEC_CTRL					\
+	(CPU_BASED_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 CPU_BASED_HLT_EXITING |					\
+	 CPU_BASED_CR3_LOAD_EXITING |					\
+	 CPU_BASED_CR3_STORE_EXITING |					\
+	 CPU_BASED_UNCOND_IO_EXITING |					\
+	 CPU_BASED_MOV_DR_EXITING |					\
+	 CPU_BASED_USE_TSC_OFFSETTING |					\
+	 CPU_BASED_MWAIT_EXITING |					\
+	 CPU_BASED_MONITOR_EXITING |					\
+	 CPU_BASED_INVLPG_EXITING |					\
+	 CPU_BASED_RDPMC_EXITING |					\
+	 CPU_BASED_INTR_WINDOW_EXITING |				\
+	 CPU_BASED_CR8_LOAD_EXITING |					\
+	 CPU_BASED_CR8_STORE_EXITING |					\
+	 CPU_BASED_RDTSC_EXITING |					\
+	 CPU_BASED_TPR_SHADOW |						\
+	 CPU_BASED_USE_IO_BITMAPS |					\
+	 CPU_BASED_MONITOR_TRAP_FLAG |					\
+	 CPU_BASED_USE_MSR_BITMAPS |					\
+	 CPU_BASED_NMI_WINDOW_EXITING |					\
+	 CPU_BASED_PAUSE_EXITING |					\
+	 CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)
+
+#define EVMCS1_SUPPORTED_2NDEXEC					\
+	(SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |			\
+	 SECONDARY_EXEC_WBINVD_EXITING |				\
+	 SECONDARY_EXEC_ENABLE_VPID |					\
+	 SECONDARY_EXEC_ENABLE_EPT |					\
+	 SECONDARY_EXEC_UNRESTRICTED_GUEST |				\
+	 SECONDARY_EXEC_DESC |						\
+	 SECONDARY_EXEC_ENABLE_RDTSCP |					\
+	 SECONDARY_EXEC_ENABLE_INVPCID |				\
+	 SECONDARY_EXEC_ENABLE_XSAVES |					\
+	 SECONDARY_EXEC_RDSEED_EXITING |				\
+	 SECONDARY_EXEC_RDRAND_EXITING |				\
+	 SECONDARY_EXEC_TSC_SCALING |					\
+	 SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |				\
+	 SECONDARY_EXEC_PT_USE_GPA |					\
+	 SECONDARY_EXEC_PT_CONCEAL_VMX |				\
+	 SECONDARY_EXEC_BUS_LOCK_DETECTION |				\
+	 SECONDARY_EXEC_NOTIFY_VM_EXITING |				\
+	 SECONDARY_EXEC_ENCLS_EXITING)
+
+#define EVMCS1_SUPPORTED_3RDEXEC (0ULL)
+
+#define EVMCS1_SUPPORTED_VMEXIT_CTRL					\
+	(VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 VM_EXIT_SAVE_DEBUG_CONTROLS |					\
+	 VM_EXIT_ACK_INTR_ON_EXIT |					\
+	 VM_EXIT_HOST_ADDR_SPACE_SIZE |					\
+	 VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL |				\
+	 VM_EXIT_SAVE_IA32_PAT |					\
+	 VM_EXIT_LOAD_IA32_PAT |					\
+	 VM_EXIT_SAVE_IA32_EFER |					\
+	 VM_EXIT_LOAD_IA32_EFER |					\
+	 VM_EXIT_CLEAR_BNDCFGS |					\
+	 VM_EXIT_PT_CONCEAL_PIP |					\
+	 VM_EXIT_CLEAR_IA32_RTIT_CTL)
+
+#define EVMCS1_SUPPORTED_VMENTRY_CTRL					\
+	(VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR |				\
+	 VM_ENTRY_LOAD_DEBUG_CONTROLS |					\
+	 VM_ENTRY_IA32E_MODE |						\
+	 VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL |				\
+	 VM_ENTRY_LOAD_IA32_PAT |					\
+	 VM_ENTRY_LOAD_IA32_EFER |					\
+	 VM_ENTRY_LOAD_BNDCFGS |					\
+	 VM_ENTRY_PT_CONCEAL_PIP |					\
+	 VM_ENTRY_LOAD_IA32_RTIT_CTL)
+
+#define EVMCS1_SUPPORTED_VMFUNC (0)
+
 struct evmcs_field {
 	u16 offset;
 	u16 clean_field;
@@ -65,114 +166,6 @@ static inline u64 evmcs_read_any(struct hv_enlightened_vmcs *evmcs,
 	return vmcs12_read_any((void *)evmcs, field, offset);
 }
 
-#if IS_ENABLED(CONFIG_HYPERV)
-
-DECLARE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
-
-static __always_inline bool kvm_is_using_evmcs(void)
-{
-	return static_branch_unlikely(&__kvm_is_using_evmcs);
-}
-
-static __always_inline int get_evmcs_offset(unsigned long field,
-					    u16 *clean_field)
-{
-	int offset = evmcs_field_offset(field, clean_field);
-
-	WARN_ONCE(offset < 0, "accessing unsupported EVMCS field %lx\n", field);
-	return offset;
-}
-
-static __always_inline void evmcs_write64(unsigned long field, u64 value)
-{
-	u16 clean_field;
-	int offset = get_evmcs_offset(field, &clean_field);
-
-	if (offset < 0)
-		return;
-
-	*(u64 *)((char *)current_evmcs + offset) = value;
-
-	current_evmcs->hv_clean_fields &= ~clean_field;
-}
-
-static __always_inline void evmcs_write32(unsigned long field, u32 value)
-{
-	u16 clean_field;
-	int offset = get_evmcs_offset(field, &clean_field);
-
-	if (offset < 0)
-		return;
-
-	*(u32 *)((char *)current_evmcs + offset) = value;
-	current_evmcs->hv_clean_fields &= ~clean_field;
-}
-
-static __always_inline void evmcs_write16(unsigned long field, u16 value)
-{
-	u16 clean_field;
-	int offset = get_evmcs_offset(field, &clean_field);
-
-	if (offset < 0)
-		return;
-
-	*(u16 *)((char *)current_evmcs + offset) = value;
-	current_evmcs->hv_clean_fields &= ~clean_field;
-}
-
-static __always_inline u64 evmcs_read64(unsigned long field)
-{
-	int offset = get_evmcs_offset(field, NULL);
-
-	if (offset < 0)
-		return 0;
-
-	return *(u64 *)((char *)current_evmcs + offset);
-}
-
-static __always_inline u32 evmcs_read32(unsigned long field)
-{
-	int offset = get_evmcs_offset(field, NULL);
-
-	if (offset < 0)
-		return 0;
-
-	return *(u32 *)((char *)current_evmcs + offset);
-}
-
-static __always_inline u16 evmcs_read16(unsigned long field)
-{
-	int offset = get_evmcs_offset(field, NULL);
-
-	if (offset < 0)
-		return 0;
-
-	return *(u16 *)((char *)current_evmcs + offset);
-}
-
-static inline void evmcs_load(u64 phys_addr)
-{
-	struct hv_vp_assist_page *vp_ap =
-		hv_get_vp_assist_page(smp_processor_id());
-
-	if (current_evmcs->hv_enlightenments_control.nested_flush_hypercall)
-		vp_ap->nested_control.features.directhypercall = 1;
-	vp_ap->current_nested_vmcs = phys_addr;
-	vp_ap->enlighten_vmentry = 1;
-}
-
-void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf);
-#else /* !IS_ENABLED(CONFIG_HYPERV) */
-static __always_inline bool kvm_is_using_evmcs(void) { return false; }
-static __always_inline void evmcs_write64(unsigned long field, u64 value) {}
-static __always_inline void evmcs_write32(unsigned long field, u32 value) {}
-static __always_inline void evmcs_write16(unsigned long field, u16 value) {}
-static __always_inline u64 evmcs_read64(unsigned long field) { return 0; }
-static __always_inline u32 evmcs_read32(unsigned long field) { return 0; }
-static __always_inline u16 evmcs_read16(unsigned long field) { return 0; }
-static inline void evmcs_load(u64 phys_addr) {}
-#endif /* IS_ENABLED(CONFIG_HYPERV) */
-
 #define EVMPTR_INVALID (-1ULL)
 #define EVMPTR_MAP_PENDING (-2ULL)
 
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index f5f652a546bf2..09d26b46800d4 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -66,6 +66,7 @@
 #include "vmx.h"
 #include "x86.h"
 #include "smm.h"
+#include "vmx_onhyperv.h"
 
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
diff --git a/arch/x86/kvm/vmx/vmx_onhyperv.c b/arch/x86/kvm/vmx/vmx_onhyperv.c
new file mode 100644
index 0000000000000..b9a8b91166d02
--- /dev/null
+++ b/arch/x86/kvm/vmx/vmx_onhyperv.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "capabilities.h"
+#include "vmx_onhyperv.h"
+
+DEFINE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
+
+/*
+ * KVM on Hyper-V always uses the latest known eVMCSv1 revision, the assumption
+ * is: in case a feature has corresponding fields in eVMCS described and it was
+ * exposed in VMX feature MSRs, KVM is free to use it. Warn if KVM meets a
+ * feature which has no corresponding eVMCS field, this likely means that KVM
+ * needs to be updated.
+ */
+#define evmcs_check_vmcs_conf(field, ctrl)					\
+	do {									\
+		typeof(vmcs_conf->field) unsupported;				\
+										\
+		unsupported = vmcs_conf->field & ~EVMCS1_SUPPORTED_ ## ctrl;	\
+		if (unsupported) {						\
+			pr_warn_once(#field " unsupported with eVMCS: 0x%llx\n",\
+				     (u64)unsupported);				\
+			vmcs_conf->field &= EVMCS1_SUPPORTED_ ## ctrl;		\
+		}								\
+	}									\
+	while (0)
+
+void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf)
+{
+	evmcs_check_vmcs_conf(cpu_based_exec_ctrl, EXEC_CTRL);
+	evmcs_check_vmcs_conf(pin_based_exec_ctrl, PINCTRL);
+	evmcs_check_vmcs_conf(cpu_based_2nd_exec_ctrl, 2NDEXEC);
+	evmcs_check_vmcs_conf(cpu_based_3rd_exec_ctrl, 3RDEXEC);
+	evmcs_check_vmcs_conf(vmentry_ctrl, VMENTRY_CTRL);
+	evmcs_check_vmcs_conf(vmexit_ctrl, VMEXIT_CTRL);
+}
diff --git a/arch/x86/kvm/vmx/vmx_onhyperv.h b/arch/x86/kvm/vmx/vmx_onhyperv.h
new file mode 100644
index 0000000000000..11541d272dbd8
--- /dev/null
+++ b/arch/x86/kvm/vmx/vmx_onhyperv.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ARCH_X86_KVM_VMX_ONHYPERV_H__
+#define __ARCH_X86_KVM_VMX_ONHYPERV_H__
+
+#include <asm/hyperv-tlfs.h>
+
+#include <linux/jump_label.h>
+
+#include "capabilities.h"
+#include "hyperv.h"
+#include "vmcs12.h"
+
+#define current_evmcs ((struct hv_enlightened_vmcs *)this_cpu_read(current_vmcs))
+
+#if IS_ENABLED(CONFIG_HYPERV)
+
+DECLARE_STATIC_KEY_FALSE(__kvm_is_using_evmcs);
+
+static __always_inline bool kvm_is_using_evmcs(void)
+{
+	return static_branch_unlikely(&__kvm_is_using_evmcs);
+}
+
+static __always_inline int get_evmcs_offset(unsigned long field,
+					    u16 *clean_field)
+{
+	int offset = evmcs_field_offset(field, clean_field);
+
+	WARN_ONCE(offset < 0, "accessing unsupported EVMCS field %lx\n", field);
+	return offset;
+}
+
+static __always_inline void evmcs_write64(unsigned long field, u64 value)
+{
+	u16 clean_field;
+	int offset = get_evmcs_offset(field, &clean_field);
+
+	if (offset < 0)
+		return;
+
+	*(u64 *)((char *)current_evmcs + offset) = value;
+
+	current_evmcs->hv_clean_fields &= ~clean_field;
+}
+
+static __always_inline void evmcs_write32(unsigned long field, u32 value)
+{
+	u16 clean_field;
+	int offset = get_evmcs_offset(field, &clean_field);
+
+	if (offset < 0)
+		return;
+
+	*(u32 *)((char *)current_evmcs + offset) = value;
+	current_evmcs->hv_clean_fields &= ~clean_field;
+}
+
+static __always_inline void evmcs_write16(unsigned long field, u16 value)
+{
+	u16 clean_field;
+	int offset = get_evmcs_offset(field, &clean_field);
+
+	if (offset < 0)
+		return;
+
+	*(u16 *)((char *)current_evmcs + offset) = value;
+	current_evmcs->hv_clean_fields &= ~clean_field;
+}
+
+static __always_inline u64 evmcs_read64(unsigned long field)
+{
+	int offset = get_evmcs_offset(field, NULL);
+
+	if (offset < 0)
+		return 0;
+
+	return *(u64 *)((char *)current_evmcs + offset);
+}
+
+static __always_inline u32 evmcs_read32(unsigned long field)
+{
+	int offset = get_evmcs_offset(field, NULL);
+
+	if (offset < 0)
+		return 0;
+
+	return *(u32 *)((char *)current_evmcs + offset);
+}
+
+static __always_inline u16 evmcs_read16(unsigned long field)
+{
+	int offset = get_evmcs_offset(field, NULL);
+
+	if (offset < 0)
+		return 0;
+
+	return *(u16 *)((char *)current_evmcs + offset);
+}
+
+static inline void evmcs_load(u64 phys_addr)
+{
+	struct hv_vp_assist_page *vp_ap =
+		hv_get_vp_assist_page(smp_processor_id());
+
+	if (current_evmcs->hv_enlightenments_control.nested_flush_hypercall)
+		vp_ap->nested_control.features.directhypercall = 1;
+	vp_ap->current_nested_vmcs = phys_addr;
+	vp_ap->enlighten_vmentry = 1;
+}
+
+void evmcs_sanitize_exec_ctrls(struct vmcs_config *vmcs_conf);
+#else /* !IS_ENABLED(CONFIG_HYPERV) */
+static __always_inline bool kvm_is_using_evmcs(void) { return false; }
+static __always_inline void evmcs_write64(unsigned long field, u64 value) {}
+static __always_inline void evmcs_write32(unsigned long field, u32 value) {}
+static __always_inline void evmcs_write16(unsigned long field, u16 value) {}
+static __always_inline u64 evmcs_read64(unsigned long field) { return 0; }
+static __always_inline u32 evmcs_read32(unsigned long field) { return 0; }
+static __always_inline u16 evmcs_read16(unsigned long field) { return 0; }
+static inline void evmcs_load(u64 phys_addr) {}
+#endif /* IS_ENABLED(CONFIG_HYPERV) */
+
+#endif /* __ARCH_X86_KVM_VMX_ONHYPERV_H__ */
diff --git a/arch/x86/kvm/vmx/vmx_ops.h b/arch/x86/kvm/vmx/vmx_ops.h
index 6a0c6e81f7f3e..8060e5fc6dbd8 100644
--- a/arch/x86/kvm/vmx/vmx_ops.h
+++ b/arch/x86/kvm/vmx/vmx_ops.h
@@ -6,7 +6,7 @@
 
 #include <asm/vmx.h>
 
-#include "hyperv.h"
+#include "vmx_onhyperv.h"
 #include "vmcs.h"
 #include "../x86.h"
 
-- 
2.43.0

[PATCH 6.6 028/121] KVM: VMX: Move posted interrupt descriptor out of VMX code

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

[ Upstream commit 699f67512f04cbaee965fad872702c06eaf440f6 ]

To prepare native usage of posted interrupts, move the PID declarations out
of VMX code such that they can be shared.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240423174114.526704-2-jacob.jun.pan@linux.intel.com
Stable-dep-of: d83c36d822be ("KVM: nVMX: Add a helper to get highest pending from Posted Interrupt vector")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/posted_intr.h | 88 ++++++++++++++++++++++++++++
 arch/x86/kvm/vmx/posted_intr.h     | 93 +-----------------------------
 arch/x86/kvm/vmx/vmx.c             |  1 +
 arch/x86/kvm/vmx/vmx.h             |  2 +-
 4 files changed, 91 insertions(+), 93 deletions(-)
 create mode 100644 arch/x86/include/asm/posted_intr.h

diff --git a/arch/x86/include/asm/posted_intr.h b/arch/x86/include/asm/posted_intr.h
new file mode 100644
index 0000000000000..f0324c56f7af5
--- /dev/null
+++ b/arch/x86/include/asm/posted_intr.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _X86_POSTED_INTR_H
+#define _X86_POSTED_INTR_H
+
+#define POSTED_INTR_ON  0
+#define POSTED_INTR_SN  1
+
+#define PID_TABLE_ENTRY_VALID 1
+
+/* Posted-Interrupt Descriptor */
+struct pi_desc {
+	u32 pir[8];     /* Posted interrupt requested */
+	union {
+		struct {
+				/* bit 256 - Outstanding Notification */
+			u16	on	: 1,
+				/* bit 257 - Suppress Notification */
+				sn	: 1,
+				/* bit 271:258 - Reserved */
+				rsvd_1	: 14;
+				/* bit 279:272 - Notification Vector */
+			u8	nv;
+				/* bit 287:280 - Reserved */
+			u8	rsvd_2;
+				/* bit 319:288 - Notification Destination */
+			u32	ndst;
+		};
+		u64 control;
+	};
+	u32 rsvd[6];
+} __aligned(64);
+
+static inline bool pi_test_and_set_on(struct pi_desc *pi_desc)
+{
+	return test_and_set_bit(POSTED_INTR_ON, (unsigned long *)&pi_desc->control);
+}
+
+static inline bool pi_test_and_clear_on(struct pi_desc *pi_desc)
+{
+	return test_and_clear_bit(POSTED_INTR_ON, (unsigned long *)&pi_desc->control);
+}
+
+static inline bool pi_test_and_clear_sn(struct pi_desc *pi_desc)
+{
+	return test_and_clear_bit(POSTED_INTR_SN, (unsigned long *)&pi_desc->control);
+}
+
+static inline bool pi_test_and_set_pir(int vector, struct pi_desc *pi_desc)
+{
+	return test_and_set_bit(vector, (unsigned long *)pi_desc->pir);
+}
+
+static inline bool pi_is_pir_empty(struct pi_desc *pi_desc)
+{
+	return bitmap_empty((unsigned long *)pi_desc->pir, NR_VECTORS);
+}
+
+static inline void pi_set_sn(struct pi_desc *pi_desc)
+{
+	set_bit(POSTED_INTR_SN, (unsigned long *)&pi_desc->control);
+}
+
+static inline void pi_set_on(struct pi_desc *pi_desc)
+{
+	set_bit(POSTED_INTR_ON, (unsigned long *)&pi_desc->control);
+}
+
+static inline void pi_clear_on(struct pi_desc *pi_desc)
+{
+	clear_bit(POSTED_INTR_ON, (unsigned long *)&pi_desc->control);
+}
+
+static inline void pi_clear_sn(struct pi_desc *pi_desc)
+{
+	clear_bit(POSTED_INTR_SN, (unsigned long *)&pi_desc->control);
+}
+
+static inline bool pi_test_on(struct pi_desc *pi_desc)
+{
+	return test_bit(POSTED_INTR_ON, (unsigned long *)&pi_desc->control);
+}
+
+static inline bool pi_test_sn(struct pi_desc *pi_desc)
+{
+	return test_bit(POSTED_INTR_SN, (unsigned long *)&pi_desc->control);
+}
+
+#endif /* _X86_POSTED_INTR_H */
diff --git a/arch/x86/kvm/vmx/posted_intr.h b/arch/x86/kvm/vmx/posted_intr.h
index 26992076552ef..6b2a0226257ea 100644
--- a/arch/x86/kvm/vmx/posted_intr.h
+++ b/arch/x86/kvm/vmx/posted_intr.h
@@ -1,98 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __KVM_X86_VMX_POSTED_INTR_H
 #define __KVM_X86_VMX_POSTED_INTR_H
-
-#define POSTED_INTR_ON  0
-#define POSTED_INTR_SN  1
-
-#define PID_TABLE_ENTRY_VALID 1
-
-/* Posted-Interrupt Descriptor */
-struct pi_desc {
-	u32 pir[8];     /* Posted interrupt requested */
-	union {
-		struct {
-				/* bit 256 - Outstanding Notification */
-			u16	on	: 1,
-				/* bit 257 - Suppress Notification */
-				sn	: 1,
-				/* bit 271:258 - Reserved */
-				rsvd_1	: 14;
-				/* bit 279:272 - Notification Vector */
-			u8	nv;
-				/* bit 287:280 - Reserved */
-			u8	rsvd_2;
-				/* bit 319:288 - Notification Destination */
-			u32	ndst;
-		};
-		u64 control;
-	};
-	u32 rsvd[6];
-} __aligned(64);
-
-static inline bool pi_test_and_set_on(struct pi_desc *pi_desc)
-{
-	return test_and_set_bit(POSTED_INTR_ON,
-			(unsigned long *)&pi_desc->control);
-}
-
-static inline bool pi_test_and_clear_on(struct pi_desc *pi_desc)
-{
-	return test_and_clear_bit(POSTED_INTR_ON,
-			(unsigned long *)&pi_desc->control);
-}
-
-static inline bool pi_test_and_clear_sn(struct pi_desc *pi_desc)
-{
-	return test_and_clear_bit(POSTED_INTR_SN,
-			(unsigned long *)&pi_desc->control);
-}
-
-static inline bool pi_test_and_set_pir(int vector, struct pi_desc *pi_desc)
-{
-	return test_and_set_bit(vector, (unsigned long *)pi_desc->pir);
-}
-
-static inline bool pi_is_pir_empty(struct pi_desc *pi_desc)
-{
-	return bitmap_empty((unsigned long *)pi_desc->pir, NR_VECTORS);
-}
-
-static inline void pi_set_sn(struct pi_desc *pi_desc)
-{
-	set_bit(POSTED_INTR_SN,
-		(unsigned long *)&pi_desc->control);
-}
-
-static inline void pi_set_on(struct pi_desc *pi_desc)
-{
-	set_bit(POSTED_INTR_ON,
-		(unsigned long *)&pi_desc->control);
-}
-
-static inline void pi_clear_on(struct pi_desc *pi_desc)
-{
-	clear_bit(POSTED_INTR_ON,
-		(unsigned long *)&pi_desc->control);
-}
-
-static inline void pi_clear_sn(struct pi_desc *pi_desc)
-{
-	clear_bit(POSTED_INTR_SN,
-		(unsigned long *)&pi_desc->control);
-}
-
-static inline bool pi_test_on(struct pi_desc *pi_desc)
-{
-	return test_bit(POSTED_INTR_ON,
-			(unsigned long *)&pi_desc->control);
-}
-
-static inline bool pi_test_sn(struct pi_desc *pi_desc)
-{
-	return test_bit(POSTED_INTR_SN,
-			(unsigned long *)&pi_desc->control);
-}
+#include <asm/posted_intr.h>
 
 void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu);
 void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 09d26b46800d4..2e0106d9d371c 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -67,6 +67,7 @@
 #include "x86.h"
 #include "smm.h"
 #include "vmx_onhyperv.h"
+#include "posted_intr.h"
 
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 912b0c4697429..6be1627d888e5 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -7,10 +7,10 @@
 #include <asm/kvm.h>
 #include <asm/intel_pt.h>
 #include <asm/perf_event.h>
+#include <asm/posted_intr.h>
 
 #include "capabilities.h"
 #include "../kvm_cache_regs.h"
-#include "posted_intr.h"
 #include "vmcs.h"
 #include "vmx_ops.h"
 #include "../cpuid.h"
-- 
2.43.0

[PATCH 6.6 029/121] KVM: nVMX: Add a helper to get highest pending from Posted Interrupt vector

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <seanjc@google.com>

[ Upstream commit d83c36d822be44db4bad0c43bea99c8908f54117 ]

Add a helper to retrieve the highest pending vector given a Posted
Interrupt descriptor.  While the actual operation is straightforward, it's
surprisingly easy to mess up, e.g. if one tries to reuse lapic.c's
find_highest_vector(), which doesn't work with PID.PIR due to the APIC's
IRR and ISR component registers being physically discontiguous (they're
4-byte registers aligned at 16-byte intervals).

To make PIR handling more consistent with respect to IRR and ISR handling,
return -1 to indicate "no interrupt pending".

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607172609.3205077-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/nested.c      |  5 +++--
 arch/x86/kvm/vmx/posted_intr.h | 10 ++++++++++
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index d1b4a85def0a6..5f85375f75b48 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -12,6 +12,7 @@
 #include "mmu.h"
 #include "nested.h"
 #include "pmu.h"
+#include "posted_intr.h"
 #include "sgx.h"
 #include "trace.h"
 #include "vmx.h"
@@ -3830,8 +3831,8 @@ static int vmx_complete_nested_posted_interrupt(struct kvm_vcpu *vcpu)
 	if (!pi_test_and_clear_on(vmx->nested.pi_desc))
 		return 0;
 
-	max_irr = find_last_bit((unsigned long *)vmx->nested.pi_desc->pir, 256);
-	if (max_irr != 256) {
+	max_irr = pi_find_highest_vector(vmx->nested.pi_desc);
+	if (max_irr > 0) {
 		vapic_page = vmx->nested.virtual_apic_map.hva;
 		if (!vapic_page)
 			goto mmio_needed;
diff --git a/arch/x86/kvm/vmx/posted_intr.h b/arch/x86/kvm/vmx/posted_intr.h
index 6b2a0226257ea..1715d2ab07be5 100644
--- a/arch/x86/kvm/vmx/posted_intr.h
+++ b/arch/x86/kvm/vmx/posted_intr.h
@@ -1,6 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __KVM_X86_VMX_POSTED_INTR_H
 #define __KVM_X86_VMX_POSTED_INTR_H
+
+#include <linux/find.h>
 #include <asm/posted_intr.h>
 
 void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu);
@@ -12,4 +14,12 @@ int vmx_pi_update_irte(struct kvm *kvm, unsigned int host_irq,
 		       uint32_t guest_irq, bool set);
 void vmx_pi_start_assignment(struct kvm *kvm);
 
+static inline int pi_find_highest_vector(struct pi_desc *pi_desc)
+{
+	int vec;
+
+	vec = find_last_bit((unsigned long *)pi_desc->pir, 256);
+	return vec < 256 ? vec : -1;
+}
+
 #endif /* __KVM_X86_VMX_POSTED_INTR_H */
-- 
2.43.0

[PATCH 6.6 030/121] KVM: nVMX: Check for pending posted interrupts when looking for nested events

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <seanjc@google.com>

[ Upstream commit 27c4fa42b11af780d49ce704f7fa67b3c2544df4 ]

Check for pending (and notified!) posted interrupts when checking if L2
has a pending wake event, as fully posted/notified virtual interrupt is a
valid wake event for HLT.

Note that KVM must check vmx->nested.pi_pending to avoid prematurely
waking L2, e.g. even if KVM sees a non-zero PID.PIR and PID.0N=1, the
virtual interrupt won't actually be recognized until a notification IRQ is
received by the vCPU or the vCPU does (nested) VM-Enter.

Fixes: 26844fee6ade ("KVM: x86: never write to memory from kvm_vcpu_check_block()")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Jim Mattson <jmattson@google.com>
Closes: https://lore.kernel.org/all/20231207010302.2240506-1-jmattson@google.com
Link: https://lore.kernel.org/r/20240607172609.3205077-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/nested.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 5f85375f75b48..0ad66b9207e85 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -3965,8 +3965,40 @@ static bool nested_vmx_preemption_timer_pending(struct kvm_vcpu *vcpu)
 
 static bool vmx_has_nested_events(struct kvm_vcpu *vcpu, bool for_injection)
 {
-	return nested_vmx_preemption_timer_pending(vcpu) ||
-	       to_vmx(vcpu)->nested.mtf_pending;
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	void *vapic = vmx->nested.virtual_apic_map.hva;
+	int max_irr, vppr;
+
+	if (nested_vmx_preemption_timer_pending(vcpu) ||
+	    vmx->nested.mtf_pending)
+		return true;
+
+	/*
+	 * Virtual Interrupt Delivery doesn't require manual injection.  Either
+	 * the interrupt is already in GUEST_RVI and will be recognized by CPU
+	 * at VM-Entry, or there is a KVM_REQ_EVENT pending and KVM will move
+	 * the interrupt from the PIR to RVI prior to entering the guest.
+	 */
+	if (for_injection)
+		return false;
+
+	if (!nested_cpu_has_vid(get_vmcs12(vcpu)) ||
+	    __vmx_interrupt_blocked(vcpu))
+		return false;
+
+	if (!vapic)
+		return false;
+
+	vppr = *((u32 *)(vapic + APIC_PROCPRI));
+
+	if (vmx->nested.pi_pending && vmx->nested.pi_desc &&
+	    pi_test_on(vmx->nested.pi_desc)) {
+		max_irr = pi_find_highest_vector(vmx->nested.pi_desc);
+		if (max_irr > 0 && (max_irr & 0xf0) > (vppr & 0xf0))
+			return true;
+	}
+
+	return false;
 }
 
 /*
-- 
2.43.0

[PATCH 6.6 031/121] PCI: Add pci_get_base_class() helper

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sui Jingfeng <suijingfeng@loongson.cn>

[ Upstream commit d427da2323b093a65d8317783e76ab8fad2e2ef0 ]

There is no function to get all PCI devices in a system by matching
against the base class code only, ignoring the sub-class code and
the programming interface.  Add pci_get_base_class() to suit the
need.

For example, if a driver wants to process all PCI display devices in
a system, it can do so like this:

  pdev = NULL;
  while ((pdev = pci_get_base_class(PCI_BASE_CLASS_DISPLAY, pdev))) {
    do_something_for_pci_display_device(pdev);
  }

Link: https://lore.kernel.org/r/20230825062714.6325-2-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
[bhelgaas: reword commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/search.c | 31 +++++++++++++++++++++++++++++++
 include/linux/pci.h  |  5 +++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index b4c138a6ec025..53840634fbfc2 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -363,6 +363,37 @@ struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from)
 }
 EXPORT_SYMBOL(pci_get_class);
 
+/**
+ * pci_get_base_class - searching for a PCI device by matching against the base class code only
+ * @class: search for a PCI device with this base class code
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices. If a PCI device is found
+ * with a matching base class code, the reference count to the device is
+ * incremented. See pci_match_one_device() to figure out how does this works.
+ * A new search is initiated by passing %NULL as the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device on the
+ * global list. The reference count for @from is always decremented if it is
+ * not %NULL.
+ *
+ * Returns:
+ * A pointer to a matched PCI device, %NULL Otherwise.
+ */
+struct pci_dev *pci_get_base_class(unsigned int class, struct pci_dev *from)
+{
+	struct pci_device_id id = {
+		.vendor = PCI_ANY_ID,
+		.device = PCI_ANY_ID,
+		.subvendor = PCI_ANY_ID,
+		.subdevice = PCI_ANY_ID,
+		.class_mask = 0xFF0000,
+		.class = class << 16,
+	};
+
+	return pci_get_dev_by_id(&id, from);
+}
+EXPORT_SYMBOL(pci_get_base_class);
+
 /**
  * pci_dev_present - Returns 1 if device matching the device list is present, 0 if not.
  * @ids: A pointer to a null terminated list of struct pci_device_id structures
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f141300116219..7b18a4b3efb0e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1182,6 +1182,8 @@ struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
 struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
 					    unsigned int devfn);
 struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
+struct pci_dev *pci_get_base_class(unsigned int class, struct pci_dev *from);
+
 int pci_dev_present(const struct pci_device_id *ids);
 
 int pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn,
@@ -1958,6 +1960,9 @@ static inline struct pci_dev *pci_get_class(unsigned int class,
 					    struct pci_dev *from)
 { return NULL; }
 
+static inline struct pci_dev *pci_get_base_class(unsigned int class,
+						 struct pci_dev *from)
+{ return NULL; }
 
 static inline int pci_dev_present(const struct pci_device_id *ids)
 { return 0; }
-- 
2.43.0

[PATCH 6.6 032/121] fbdev/vesafb: Replace references to global screen_info by local pointer

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 3218286bbb78cac3dde713514529e0480d678173 ]

Get the global screen_info's address once and access the data via
this pointer. Limits the use of global state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206135153.2599-4-tzimmermann@suse.de
Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/vesafb.c | 66 +++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 31 deletions(-)

diff --git a/drivers/video/fbdev/vesafb.c b/drivers/video/fbdev/vesafb.c
index c0edceea0a793..ea89accbec385 100644
--- a/drivers/video/fbdev/vesafb.c
+++ b/drivers/video/fbdev/vesafb.c
@@ -243,6 +243,7 @@ static int vesafb_setup(char *options)
 
 static int vesafb_probe(struct platform_device *dev)
 {
+	struct screen_info *si = &screen_info;
 	struct fb_info *info;
 	struct vesafb_par *par;
 	int i, err;
@@ -255,17 +256,17 @@ static int vesafb_probe(struct platform_device *dev)
 	fb_get_options("vesafb", &option);
 	vesafb_setup(option);
 
-	if (screen_info.orig_video_isVGA != VIDEO_TYPE_VLFB)
+	if (si->orig_video_isVGA != VIDEO_TYPE_VLFB)
 		return -ENODEV;
 
-	vga_compat = (screen_info.capabilities & 2) ? 0 : 1;
-	vesafb_fix.smem_start = screen_info.lfb_base;
-	vesafb_defined.bits_per_pixel = screen_info.lfb_depth;
+	vga_compat = (si->capabilities & 2) ? 0 : 1;
+	vesafb_fix.smem_start = si->lfb_base;
+	vesafb_defined.bits_per_pixel = si->lfb_depth;
 	if (15 == vesafb_defined.bits_per_pixel)
 		vesafb_defined.bits_per_pixel = 16;
-	vesafb_defined.xres = screen_info.lfb_width;
-	vesafb_defined.yres = screen_info.lfb_height;
-	vesafb_fix.line_length = screen_info.lfb_linelength;
+	vesafb_defined.xres = si->lfb_width;
+	vesafb_defined.yres = si->lfb_height;
+	vesafb_fix.line_length = si->lfb_linelength;
 	vesafb_fix.visual   = (vesafb_defined.bits_per_pixel == 8) ?
 		FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
 
@@ -277,7 +278,7 @@ static int vesafb_probe(struct platform_device *dev)
 	/*   size_total -- all video memory we have. Used for mtrr
 	 *                 entries, resource allocation and bounds
 	 *                 checking. */
-	size_total = screen_info.lfb_size * 65536;
+	size_total = si->lfb_size * 65536;
 	if (vram_total)
 		size_total = vram_total * 1024 * 1024;
 	if (size_total < size_vmode)
@@ -297,7 +298,7 @@ static int vesafb_probe(struct platform_device *dev)
 	vesafb_fix.smem_len = size_remap;
 
 #ifndef __i386__
-	screen_info.vesapm_seg = 0;
+	si->vesapm_seg = 0;
 #endif
 
 	if (!request_mem_region(vesafb_fix.smem_start, size_total, "vesafb")) {
@@ -317,23 +318,26 @@ static int vesafb_probe(struct platform_device *dev)
 	par = info->par;
 	info->pseudo_palette = par->pseudo_palette;
 
-	par->base = screen_info.lfb_base;
+	par->base = si->lfb_base;
 	par->size = size_total;
 
 	printk(KERN_INFO "vesafb: mode is %dx%dx%d, linelength=%d, pages=%d\n",
-	       vesafb_defined.xres, vesafb_defined.yres, vesafb_defined.bits_per_pixel, vesafb_fix.line_length, screen_info.pages);
+	       vesafb_defined.xres, vesafb_defined.yres, vesafb_defined.bits_per_pixel,
+	       vesafb_fix.line_length, si->pages);
 
-	if (screen_info.vesapm_seg) {
+	if (si->vesapm_seg) {
 		printk(KERN_INFO "vesafb: protected mode interface info at %04x:%04x\n",
-		       screen_info.vesapm_seg,screen_info.vesapm_off);
+		       si->vesapm_seg, si->vesapm_off);
 	}
 
-	if (screen_info.vesapm_seg < 0xc000)
+	if (si->vesapm_seg < 0xc000)
 		ypan = pmi_setpal = 0; /* not available or some DOS TSR ... */
 
 	if (ypan || pmi_setpal) {
+		unsigned long pmi_phys;
 		unsigned short *pmi_base;
-		pmi_base  = (unsigned short*)phys_to_virt(((unsigned long)screen_info.vesapm_seg << 4) + screen_info.vesapm_off);
+		pmi_phys  = ((unsigned long)si->vesapm_seg << 4) + si->vesapm_off;
+		pmi_base  = (unsigned short *)phys_to_virt(pmi_phys);
 		pmi_start = (void*)((char*)pmi_base + pmi_base[1]);
 		pmi_pal   = (void*)((char*)pmi_base + pmi_base[2]);
 		printk(KERN_INFO "vesafb: pmi: set display start = %p, set palette = %p\n",pmi_start,pmi_pal);
@@ -377,14 +381,14 @@ static int vesafb_probe(struct platform_device *dev)
 	vesafb_defined.left_margin  = (vesafb_defined.xres / 8) & 0xf8;
 	vesafb_defined.hsync_len    = (vesafb_defined.xres / 8) & 0xf8;
 
-	vesafb_defined.red.offset    = screen_info.red_pos;
-	vesafb_defined.red.length    = screen_info.red_size;
-	vesafb_defined.green.offset  = screen_info.green_pos;
-	vesafb_defined.green.length  = screen_info.green_size;
-	vesafb_defined.blue.offset   = screen_info.blue_pos;
-	vesafb_defined.blue.length   = screen_info.blue_size;
-	vesafb_defined.transp.offset = screen_info.rsvd_pos;
-	vesafb_defined.transp.length = screen_info.rsvd_size;
+	vesafb_defined.red.offset    = si->red_pos;
+	vesafb_defined.red.length    = si->red_size;
+	vesafb_defined.green.offset  = si->green_pos;
+	vesafb_defined.green.length  = si->green_size;
+	vesafb_defined.blue.offset   = si->blue_pos;
+	vesafb_defined.blue.length   = si->blue_size;
+	vesafb_defined.transp.offset = si->rsvd_pos;
+	vesafb_defined.transp.length = si->rsvd_size;
 
 	if (vesafb_defined.bits_per_pixel <= 8) {
 		depth = vesafb_defined.green.length;
@@ -399,14 +403,14 @@ static int vesafb_probe(struct platform_device *dev)
 	       (vesafb_defined.bits_per_pixel > 8) ?
 	       "Truecolor" : (vga_compat || pmi_setpal) ?
 	       "Pseudocolor" : "Static Pseudocolor",
-	       screen_info.rsvd_size,
-	       screen_info.red_size,
-	       screen_info.green_size,
-	       screen_info.blue_size,
-	       screen_info.rsvd_pos,
-	       screen_info.red_pos,
-	       screen_info.green_pos,
-	       screen_info.blue_pos);
+	       si->rsvd_size,
+	       si->red_size,
+	       si->green_size,
+	       si->blue_size,
+	       si->rsvd_pos,
+	       si->red_pos,
+	       si->green_pos,
+	       si->blue_pos);
 
 	vesafb_fix.ypanstep  = ypan     ? 1 : 0;
 	vesafb_fix.ywrapstep = (ypan>1) ? 1 : 0;
-- 
2.43.0

[PATCH 6.6 033/121] video: Add helpers for decoding screen_info

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 75fa9b7e375e35739663cde0252d31e586c6314a ]

The plain values as stored in struct screen_info need to be decoded
before being used. Add helpers that decode the type of video output
and the framebuffer I/O aperture.

Old or non-x86 systems may not set the type of video directly, but
only indicate the presence by storing 0x01 in orig_video_isVGA. The
decoding logic in screen_info_video_type() takes this into account.
It then follows similar code in vgacon's vgacon_startup() to detect
the video type from the given values.

A call to screen_info_resources() returns all known resources of the
given screen_info. The resources' values have been taken from existing
code in vgacon and vga16fb. These drivers can later be converted to
use the new interfaces.

v2:
	* return ssize_t from screen_info_resources()
	* don't call __screen_info_has_lfb() unnecessarily

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-2-tzimmermann@suse.de
Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/Kconfig            |   1 +
 drivers/video/Kconfig               |   4 +
 drivers/video/Makefile              |   3 +
 drivers/video/screen_info_generic.c | 146 ++++++++++++++++++++++++++++
 include/linux/screen_info.h         | 100 +++++++++++++++++++
 5 files changed, 254 insertions(+)
 create mode 100644 drivers/video/screen_info_generic.c

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b59e3041fd627..f0e9f250669e2 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -229,6 +229,7 @@ config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
 config SYSFB
 	bool
 	select BOOT_VESA_SUPPORT
+	select SCREEN_INFO
 
 config SYSFB_SIMPLEFB
 	bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b694d7669d320..1eb755a94940a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -11,6 +11,10 @@ config APERTURE_HELPERS
 	  Support tracking and hand-over of aperture ownership. Required
 	  by graphics drivers for firmware-provided framebuffers.
 
+config SCREEN_INFO
+	bool
+	default n
+
 config STI_CORE
 	bool
 	depends on PARISC
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 6bbc039508995..b929b664d52cd 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -1,12 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0
 
 obj-$(CONFIG_APERTURE_HELPERS)    += aperture.o
+obj-$(CONFIG_SCREEN_INFO)         += screen_info.o
 obj-$(CONFIG_STI_CORE)            += sticore.o
 obj-$(CONFIG_VGASTATE)            += vgastate.o
 obj-$(CONFIG_VIDEO_CMDLINE)       += cmdline.o
 obj-$(CONFIG_VIDEO_NOMODESET)     += nomodeset.o
 obj-$(CONFIG_HDMI)                += hdmi.o
 
+screen_info-y			  := screen_info_generic.o
+
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_FB_STI)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
diff --git a/drivers/video/screen_info_generic.c b/drivers/video/screen_info_generic.c
new file mode 100644
index 0000000000000..64117c6367abb
--- /dev/null
+++ b/drivers/video/screen_info_generic.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/export.h>
+#include <linux/ioport.h>
+#include <linux/screen_info.h>
+#include <linux/string.h>
+
+static void resource_init_named(struct resource *r,
+				resource_size_t start, resource_size_t size,
+				const char *name, unsigned int flags)
+{
+	memset(r, 0, sizeof(*r));
+
+	r->start = start;
+	r->end = start + size - 1;
+	r->name = name;
+	r->flags = flags;
+}
+
+static void resource_init_io_named(struct resource *r,
+				   resource_size_t start, resource_size_t size,
+				   const char *name)
+{
+	resource_init_named(r, start, size, name, IORESOURCE_IO);
+}
+
+static void resource_init_mem_named(struct resource *r,
+				   resource_size_t start, resource_size_t size,
+				   const char *name)
+{
+	resource_init_named(r, start, size, name, IORESOURCE_MEM);
+}
+
+static inline bool __screen_info_has_ega_gfx(unsigned int mode)
+{
+	switch (mode) {
+	case 0x0d:	/* 320x200-4 */
+	case 0x0e:	/* 640x200-4 */
+	case 0x0f:	/* 640x350-1 */
+	case 0x10:	/* 640x350-4 */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static inline bool __screen_info_has_vga_gfx(unsigned int mode)
+{
+	switch (mode) {
+	case 0x10:	/* 640x480-1 */
+	case 0x12:	/* 640x480-4 */
+	case 0x13:	/* 320-200-8 */
+	case 0x6a:	/* 800x600-4 (VESA) */
+		return true;
+	default:
+		return __screen_info_has_ega_gfx(mode);
+	}
+}
+
+/**
+ * screen_info_resources() - Get resources from screen_info structure
+ * @si: the screen_info
+ * @r: pointer to an array of resource structures
+ * @num: number of elements in @r:
+ *
+ * Returns:
+ * The number of resources stored in @r on success, or a negative errno code otherwise.
+ *
+ * A call to screen_info_resources() returns the resources consumed by the
+ * screen_info's device or framebuffer. The result is stored in the caller-supplied
+ * array @r with up to @num elements. The function returns the number of
+ * initialized elements.
+ */
+ssize_t screen_info_resources(const struct screen_info *si, struct resource *r, size_t num)
+{
+	struct resource *pos = r;
+	unsigned int type = screen_info_video_type(si);
+	u64 base, size;
+
+	switch (type) {
+	case VIDEO_TYPE_MDA:
+		if (num > 0)
+			resource_init_io_named(pos++, 0x3b0, 12, "mda");
+		if (num > 1)
+			resource_init_io_named(pos++, 0x3bf, 0x01, "mda");
+		if (num > 2)
+			resource_init_mem_named(pos++, 0xb0000, 0x2000, "mda");
+		break;
+	case VIDEO_TYPE_CGA:
+		if (num > 0)
+			resource_init_io_named(pos++, 0x3d4, 0x02, "cga");
+		if (num > 1)
+			resource_init_mem_named(pos++, 0xb8000, 0x2000, "cga");
+		break;
+	case VIDEO_TYPE_EGAM:
+		if (num > 0)
+			resource_init_io_named(pos++, 0x3bf, 0x10, "ega");
+		if (num > 1)
+			resource_init_mem_named(pos++, 0xb0000, 0x8000, "ega");
+		break;
+	case VIDEO_TYPE_EGAC:
+		if (num > 0)
+			resource_init_io_named(pos++, 0x3c0, 0x20, "ega");
+		if (num > 1) {
+			if (__screen_info_has_ega_gfx(si->orig_video_mode))
+				resource_init_mem_named(pos++, 0xa0000, 0x10000, "ega");
+			else
+				resource_init_mem_named(pos++, 0xb8000, 0x8000, "ega");
+		}
+		break;
+	case VIDEO_TYPE_VGAC:
+		if (num > 0)
+			resource_init_io_named(pos++, 0x3c0, 0x20, "vga+");
+		if (num > 1) {
+			if (__screen_info_has_vga_gfx(si->orig_video_mode))
+				resource_init_mem_named(pos++, 0xa0000, 0x10000, "vga+");
+			else
+				resource_init_mem_named(pos++, 0xb8000, 0x8000, "vga+");
+		}
+		break;
+	case VIDEO_TYPE_VLFB:
+	case VIDEO_TYPE_EFI:
+		base = __screen_info_lfb_base(si);
+		if (!base)
+			break;
+		size = __screen_info_lfb_size(si, type);
+		if (!size)
+			break;
+		if (num > 0)
+			resource_init_mem_named(pos++, base, size, "lfb");
+		break;
+	case VIDEO_TYPE_PICA_S3:
+	case VIDEO_TYPE_MIPS_G364:
+	case VIDEO_TYPE_SGI:
+	case VIDEO_TYPE_TGAC:
+	case VIDEO_TYPE_SUN:
+	case VIDEO_TYPE_SUNPCI:
+	case VIDEO_TYPE_PMAC:
+	default:
+		/* not supported */
+		return -EINVAL;
+	}
+
+	return pos - r;
+}
+EXPORT_SYMBOL(screen_info_resources);
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index eab7081392d50..e7a02c5609d12 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -4,6 +4,106 @@
 
 #include <uapi/linux/screen_info.h>
 
+/**
+ * SCREEN_INFO_MAX_RESOURCES - maximum number of resources per screen_info
+ */
+#define SCREEN_INFO_MAX_RESOURCES	3
+
+struct resource;
+
+static inline bool __screen_info_has_lfb(unsigned int type)
+{
+	return (type == VIDEO_TYPE_VLFB) || (type == VIDEO_TYPE_EFI);
+}
+
+static inline u64 __screen_info_lfb_base(const struct screen_info *si)
+{
+	u64 lfb_base = si->lfb_base;
+
+	if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		lfb_base |= (u64)si->ext_lfb_base << 32;
+
+	return lfb_base;
+}
+
+static inline u64 __screen_info_lfb_size(const struct screen_info *si, unsigned int type)
+{
+	u64 lfb_size = si->lfb_size;
+
+	if (type == VIDEO_TYPE_VLFB)
+		lfb_size <<= 16;
+	return lfb_size;
+}
+
+static inline unsigned int __screen_info_video_type(unsigned int type)
+{
+	switch (type) {
+	case VIDEO_TYPE_MDA:
+	case VIDEO_TYPE_CGA:
+	case VIDEO_TYPE_EGAM:
+	case VIDEO_TYPE_EGAC:
+	case VIDEO_TYPE_VGAC:
+	case VIDEO_TYPE_VLFB:
+	case VIDEO_TYPE_PICA_S3:
+	case VIDEO_TYPE_MIPS_G364:
+	case VIDEO_TYPE_SGI:
+	case VIDEO_TYPE_TGAC:
+	case VIDEO_TYPE_SUN:
+	case VIDEO_TYPE_SUNPCI:
+	case VIDEO_TYPE_PMAC:
+	case VIDEO_TYPE_EFI:
+		return type;
+	default:
+		return 0;
+	}
+}
+
+/**
+ * screen_info_video_type() - Decodes the video type from struct screen_info
+ * @si: an instance of struct screen_info
+ *
+ * Returns:
+ * A VIDEO_TYPE_ constant representing si's type of video display, or 0 otherwise.
+ */
+static inline unsigned int screen_info_video_type(const struct screen_info *si)
+{
+	unsigned int type;
+
+	// check if display output is on
+	if (!si->orig_video_isVGA)
+		return 0;
+
+	// check for a known VIDEO_TYPE_ constant
+	type = __screen_info_video_type(si->orig_video_isVGA);
+	if (type)
+		return si->orig_video_isVGA;
+
+	// check if text mode has been initialized
+	if (!si->orig_video_lines || !si->orig_video_cols)
+		return 0;
+
+	// 80x25 text, mono
+	if (si->orig_video_mode == 0x07) {
+		if ((si->orig_video_ega_bx & 0xff) != 0x10)
+			return VIDEO_TYPE_EGAM;
+		else
+			return VIDEO_TYPE_MDA;
+	}
+
+	// EGA/VGA, 16 colors
+	if ((si->orig_video_ega_bx & 0xff) != 0x10) {
+		if (si->orig_video_isVGA)
+			return VIDEO_TYPE_VGAC;
+		else
+			return VIDEO_TYPE_EGAC;
+	}
+
+	// the rest...
+	return VIDEO_TYPE_CGA;
+}
+
+ssize_t screen_info_resources(const struct screen_info *si, struct resource *r, size_t num);
+
 extern struct screen_info screen_info;
 
 #endif /* _SCREEN_INFO_H */
-- 
2.43.0

[PATCH 6.6 034/121] video: Provide screen_info_get_pci_dev() to find screen_infos PCI device

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 036105e3a776b6fc2fe0d262896a23ff2cc2e6b1 ]

Add screen_info_get_pci_dev() to find the PCI device of an instance
of screen_info. Does nothing on systems without PCI bus.

v3:
	* search PCI device with pci_get_base_class() (Sui)
v2:
	* remove ret from screen_info_pci_dev() (Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-3-tzimmermann@suse.de
Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/Makefile          |  1 +
 drivers/video/screen_info_pci.c | 48 +++++++++++++++++++++++++++++++++
 include/linux/screen_info.h     | 10 +++++++
 3 files changed, 59 insertions(+)
 create mode 100644 drivers/video/screen_info_pci.c

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index b929b664d52cd..6bbf87c1b579e 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_VIDEO_NOMODESET)     += nomodeset.o
 obj-$(CONFIG_HDMI)                += hdmi.o
 
 screen_info-y			  := screen_info_generic.o
+screen_info-$(CONFIG_PCI)         += screen_info_pci.o
 
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_FB_STI)		  += console/
diff --git a/drivers/video/screen_info_pci.c b/drivers/video/screen_info_pci.c
new file mode 100644
index 0000000000000..d8985a54ce717
--- /dev/null
+++ b/drivers/video/screen_info_pci.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+
+static struct pci_dev *__screen_info_pci_dev(struct resource *res)
+{
+	struct pci_dev *pdev = NULL;
+	const struct resource *r = NULL;
+
+	if (!(res->flags & IORESOURCE_MEM))
+		return NULL;
+
+	while (!r && (pdev = pci_get_base_class(PCI_BASE_CLASS_DISPLAY, pdev))) {
+		r = pci_find_resource(pdev, res);
+	}
+
+	return pdev;
+}
+
+/**
+ * screen_info_pci_dev() - Return PCI parent device that contains screen_info's framebuffer
+ * @si: the screen_info
+ *
+ * Returns:
+ * The screen_info's parent device or NULL on success, or a pointer-encoded
+ * errno value otherwise. The value NULL is not an error. It signals that no
+ * PCI device has been found.
+ */
+struct pci_dev *screen_info_pci_dev(const struct screen_info *si)
+{
+	struct resource res[SCREEN_INFO_MAX_RESOURCES];
+	ssize_t i, numres;
+
+	numres = screen_info_resources(si, res, ARRAY_SIZE(res));
+	if (numres < 0)
+		return ERR_PTR(numres);
+
+	for (i = 0; i < numres; ++i) {
+		struct pci_dev *pdev = __screen_info_pci_dev(&res[i]);
+
+		if (pdev)
+			return pdev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(screen_info_pci_dev);
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index e7a02c5609d12..0eae08e3c6f90 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -9,6 +9,7 @@
  */
 #define SCREEN_INFO_MAX_RESOURCES	3
 
+struct pci_dev;
 struct resource;
 
 static inline bool __screen_info_has_lfb(unsigned int type)
@@ -104,6 +105,15 @@ static inline unsigned int screen_info_video_type(const struct screen_info *si)
 
 ssize_t screen_info_resources(const struct screen_info *si, struct resource *r, size_t num);
 
+#if defined(CONFIG_PCI)
+struct pci_dev *screen_info_pci_dev(const struct screen_info *si);
+#else
+static inline struct pci_dev *screen_info_pci_dev(const struct screen_info *si)
+{
+	return NULL;
+}
+#endif
+
 extern struct screen_info screen_info;
 
 #endif /* _SCREEN_INFO_H */
-- 
2.43.0

[PATCH 6.6 035/121] firmware/sysfb: Update screen_info for relocated EFI framebuffers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 78aa89d1dfba1e3cf4a2e053afa3b4c4ec622371 ]

On ARM PCI systems, the PCI hierarchy might be reconfigured during
boot and the firmware framebuffer might move as a result of that.
The values in screen_info will then be invalid.

Work around this problem by tracking the framebuffer's initial
location before it get relocated; then fix the screen_info state
between reloaction and creating the firmware framebuffer's device.

This functionality has been lifted from efifb. See the commit message
of commit 55d728a40d36 ("efi/fb: Avoid reconfiguration of BAR that
covers the framebuffer") for more information.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-8-tzimmermann@suse.de
Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/sysfb.c        |  2 +
 drivers/video/screen_info_pci.c | 88 +++++++++++++++++++++++++++++++++
 include/linux/screen_info.h     | 16 ++++++
 3 files changed, 106 insertions(+)

diff --git a/drivers/firmware/sysfb.c b/drivers/firmware/sysfb.c
index 3c197db42c9d9..defd7a36cb08a 100644
--- a/drivers/firmware/sysfb.c
+++ b/drivers/firmware/sysfb.c
@@ -77,6 +77,8 @@ static __init int sysfb_init(void)
 	bool compatible;
 	int ret = 0;
 
+	screen_info_apply_fixups();
+
 	mutex_lock(&disable_lock);
 	if (disabled)
 		goto unlock_mutex;
diff --git a/drivers/video/screen_info_pci.c b/drivers/video/screen_info_pci.c
index d8985a54ce717..6c58335171410 100644
--- a/drivers/video/screen_info_pci.c
+++ b/drivers/video/screen_info_pci.c
@@ -1,7 +1,95 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <linux/pci.h>
+#include <linux/printk.h>
 #include <linux/screen_info.h>
+#include <linux/string.h>
+
+static struct pci_dev *screen_info_lfb_pdev;
+static size_t screen_info_lfb_bar;
+static resource_size_t screen_info_lfb_offset;
+static struct resource screen_info_lfb_res = DEFINE_RES_MEM(0, 0);
+
+static bool __screen_info_relocation_is_valid(const struct screen_info *si, struct resource *pr)
+{
+	u64 size = __screen_info_lfb_size(si, screen_info_video_type(si));
+
+	if (screen_info_lfb_offset > resource_size(pr))
+		return false;
+	if (size > resource_size(pr))
+		return false;
+	if (resource_size(pr) - size < screen_info_lfb_offset)
+		return false;
+
+	return true;
+}
+
+void screen_info_apply_fixups(void)
+{
+	struct screen_info *si = &screen_info;
+
+	if (screen_info_lfb_pdev) {
+		struct resource *pr = &screen_info_lfb_pdev->resource[screen_info_lfb_bar];
+
+		if (pr->start != screen_info_lfb_res.start) {
+			if (__screen_info_relocation_is_valid(si, pr)) {
+				/*
+				 * Only update base if we have an actual
+				 * relocation to a valid I/O range.
+				 */
+				__screen_info_set_lfb_base(si, pr->start + screen_info_lfb_offset);
+				pr_info("Relocating firmware framebuffer to offset %pa[d] within %pr\n",
+					&screen_info_lfb_offset, pr);
+			} else {
+				pr_warn("Invalid relocating, disabling firmware framebuffer\n");
+			}
+		}
+	}
+}
+
+static void screen_info_fixup_lfb(struct pci_dev *pdev)
+{
+	unsigned int type;
+	struct resource res[SCREEN_INFO_MAX_RESOURCES];
+	size_t i, numres;
+	int ret;
+	const struct screen_info *si = &screen_info;
+
+	if (screen_info_lfb_pdev)
+		return; // already found
+
+	type = screen_info_video_type(si);
+	if (type != VIDEO_TYPE_EFI)
+		return; // only applies to EFI
+
+	ret = screen_info_resources(si, res, ARRAY_SIZE(res));
+	if (ret < 0)
+		return;
+	numres = ret;
+
+	for (i = 0; i < numres; ++i) {
+		struct resource *r = &res[i];
+		const struct resource *pr;
+
+		if (!(r->flags & IORESOURCE_MEM))
+			continue;
+		pr = pci_find_resource(pdev, r);
+		if (!pr)
+			continue;
+
+		/*
+		 * We've found a PCI device with the framebuffer
+		 * resource. Store away the parameters to track
+		 * relocation of the framebuffer aperture.
+		 */
+		screen_info_lfb_pdev = pdev;
+		screen_info_lfb_bar = pr - pdev->resource;
+		screen_info_lfb_offset = r->start - pr->start;
+		memcpy(&screen_info_lfb_res, r, sizeof(screen_info_lfb_res));
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY, 16,
+			       screen_info_fixup_lfb);
 
 static struct pci_dev *__screen_info_pci_dev(struct resource *res)
 {
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index 0eae08e3c6f90..75303c126285a 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -4,6 +4,8 @@
 
 #include <uapi/linux/screen_info.h>
 
+#include <linux/bits.h>
+
 /**
  * SCREEN_INFO_MAX_RESOURCES - maximum number of resources per screen_info
  */
@@ -27,6 +29,17 @@ static inline u64 __screen_info_lfb_base(const struct screen_info *si)
 	return lfb_base;
 }
 
+static inline void __screen_info_set_lfb_base(struct screen_info *si, u64 lfb_base)
+{
+	si->lfb_base = lfb_base & GENMASK_ULL(31, 0);
+	si->ext_lfb_base = (lfb_base & GENMASK_ULL(63, 32)) >> 32;
+
+	if (si->ext_lfb_base)
+		si->capabilities |= VIDEO_CAPABILITY_64BIT_BASE;
+	else
+		si->capabilities &= ~VIDEO_CAPABILITY_64BIT_BASE;
+}
+
 static inline u64 __screen_info_lfb_size(const struct screen_info *si, unsigned int type)
 {
 	u64 lfb_size = si->lfb_size;
@@ -106,8 +119,11 @@ static inline unsigned int screen_info_video_type(const struct screen_info *si)
 ssize_t screen_info_resources(const struct screen_info *si, struct resource *r, size_t num);
 
 #if defined(CONFIG_PCI)
+void screen_info_apply_fixups(void);
 struct pci_dev *screen_info_pci_dev(const struct screen_info *si);
 #else
+static inline void screen_info_apply_fixups(void)
+{ }
 static inline struct pci_dev *screen_info_pci_dev(const struct screen_info *si)
 {
 	return NULL;
-- 
2.43.0

[PATCH 6.6 036/121] fbdev: vesafb: Detect VGA compatibility from screen infos VESA attributes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit c2bc958b2b03e361f14df99983bc64a39a7323a3 ]

Test the vesa_attributes field in struct screen_info for compatibility
with VGA hardware. Vesafb currently tests bit 1 in screen_info's
capabilities field which indicates a 64-bit lfb address and is
unrelated to VGA compatibility.

Section 4.4 of the Vesa VBE 2.0 specifications defines that bit 5 in
the mode's attributes field signals VGA compatibility. The mode is
compatible with VGA hardware if the bit is clear. In that case, the
driver can access VGA state of the VBE's underlying hardware. The
vesafb driver uses this feature to program the color LUT in palette
modes. Without, colors might be incorrect.

The problem got introduced in commit 89ec4c238e7a ("[PATCH] vesafb: Fix
incorrect logo colors in x86_64"). It incorrectly stores the mode
attributes in the screen_info's capabilities field and updates vesafb
accordingly. Later, commit 5e8ddcbe8692 ("Video mode probing support for
the new x86 setup code") fixed the screen_info, but did not update vesafb.
Color output still tends to work, because bit 1 in capabilities is
usually 0.

Besides fixing the bug in vesafb, this commit introduces a helper that
reads the correct bit from screen_info.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5e8ddcbe8692 ("Video mode probing support for the new x86 setup code")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: <stable@vger.kernel.org> # v2.6.23+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/vesafb.c |  2 +-
 include/linux/screen_info.h  | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/vesafb.c b/drivers/video/fbdev/vesafb.c
index ea89accbec385..a21581b40256c 100644
--- a/drivers/video/fbdev/vesafb.c
+++ b/drivers/video/fbdev/vesafb.c
@@ -259,7 +259,7 @@ static int vesafb_probe(struct platform_device *dev)
 	if (si->orig_video_isVGA != VIDEO_TYPE_VLFB)
 		return -ENODEV;
 
-	vga_compat = (si->capabilities & 2) ? 0 : 1;
+	vga_compat = !__screen_info_vbe_mode_nonvga(si);
 	vesafb_fix.smem_start = si->lfb_base;
 	vesafb_defined.bits_per_pixel = si->lfb_depth;
 	if (15 == vesafb_defined.bits_per_pixel)
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index 75303c126285a..6a4a3cec4638b 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -49,6 +49,16 @@ static inline u64 __screen_info_lfb_size(const struct screen_info *si, unsigned
 	return lfb_size;
 }
 
+static inline bool __screen_info_vbe_mode_nonvga(const struct screen_info *si)
+{
+	/*
+	 * VESA modes typically run on VGA hardware. Set bit 5 signals that this
+	 * is not the case. Drivers can then not make use of VGA resources. See
+	 * Sec 4.4 of the VBE 2.0 spec.
+	 */
+	return si->vesa_attributes & BIT(5);
+}
+
 static inline unsigned int __screen_info_video_type(unsigned int type)
 {
 	switch (type) {
-- 
2.43.0

[PATCH 6.6 037/121] mm: restrict the pcp batch scale factor to avoid too long latency

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huang Ying <ying.huang@intel.com>

[ Upstream commit 52166607ecc980391b1fffbce0be3074a96d0c7b ]

In page allocator, PCP (Per-CPU Pageset) is refilled and drained in
batches to increase page allocation throughput, reduce page
allocation/freeing latency per page, and reduce zone lock contention.  But
too large batch size will cause too long maximal allocation/freeing
latency, which may punish arbitrary users.  So the default batch size is
chosen carefully (in zone_batchsize(), the value is 63 for zone > 1GB) to
avoid that.

In commit 3b12e7e97938 ("mm/page_alloc: scale the number of pages that are
batch freed"), the batch size will be scaled for large number of page
freeing to improve page freeing performance and reduce zone lock
contention.  Similar optimization can be used for large number of pages
allocation too.

To find out a suitable max batch scale factor (that is, max effective
batch size), some tests and measurement on some machines were done as
follows.

A set of debug patches are implemented as follows,

- Set PCP high to be 2 * batch to reduce the effect of PCP high

- Disable free batch size scaling to get the raw performance.

- The code with zone lock held is extracted from rmqueue_bulk() and
  free_pcppages_bulk() to 2 separate functions to make it easy to
  measure the function run time with ftrace function_graph tracer.

- The batch size is hard coded to be 63 (default), 127, 255, 511,
  1023, 2047, 4095.

Then will-it-scale/page_fault1 is used to generate the page
allocation/freeing workload.  The page allocation/freeing throughput
(page/s) is measured via will-it-scale.  The page allocation/freeing
average latency (alloc/free latency avg, in us) and allocation/freeing
latency at 99 percentile (alloc/free latency 99%, in us) are measured with
ftrace function_graph tracer.

The test results are as follows,

Sapphire Rapids Server
======================
Batch	throughput	free latency	free latency	alloc latency	alloc latency
	page/s		avg / us	99% / us	avg / us	99% / us
-----	----------	------------	------------	-------------	-------------
  63	513633.4	 2.33		 3.57		 2.67		  6.83
 127	517616.7	 4.35		 6.65		 4.22		 13.03
 255	520822.8	 8.29		13.32		 7.52		 25.24
 511	524122.0	15.79		23.42		14.02		 49.35
1023	525980.5	30.25		44.19		25.36		 94.88
2047	526793.6	59.39		84.50		45.22		140.81

Ice Lake Server
===============
Batch	throughput	free latency	free latency	alloc latency	alloc latency
	page/s		avg / us	99% / us	avg / us	99% / us
-----	----------	------------	------------	-------------	-------------
  63	620210.3	 2.21		 3.68		 2.02		 4.35
 127	627003.0	 4.09		 6.86		 3.51		 8.28
 255	630777.5	 7.70		13.50		 6.17		15.97
 511	633651.5	14.85		22.62		11.66		31.08
1023	637071.1	28.55		42.02		20.81		54.36
2047	638089.7	56.54		84.06		39.28		91.68

Cascade Lake Server
===================
Batch	throughput	free latency	free latency	alloc latency	alloc latency
	page/s		avg / us	99% / us	avg / us	99% / us
-----	----------	------------	------------	-------------	-------------
  63	404706.7	 3.29		  5.03		 3.53		  4.75
 127	422475.2	 6.12		  9.09		 6.36		  8.76
 255	411522.2	11.68		 16.97		10.90		 16.39
 511	428124.1	22.54		 31.28		19.86		 32.25
1023	414718.4	43.39		 62.52		40.00		 66.33
2047	429848.7	86.64		120.34		71.14		106.08

Commet Lake Desktop
===================
Batch	throughput	free latency	free latency	alloc latency	alloc latency
	page/s		avg / us	99% / us	avg / us	99% / us
-----	----------	------------	------------	-------------	-------------

  63	795183.13	 2.18		 3.55		 2.03		 3.05
 127	803067.85	 3.91		 6.56		 3.85		 5.52
 255	812771.10	 7.35		10.80		 7.14		10.20
 511	817723.48	14.17		27.54		13.43		30.31
1023	818870.19	27.72		40.10		27.89		46.28

Coffee Lake Desktop
===================
Batch	throughput	free latency	free latency	alloc latency	alloc latency
	page/s		avg / us	99% / us	avg / us	99% / us
-----	----------	------------	------------	-------------	-------------
  63	510542.8	 3.13		  4.40		 2.48		 3.43
 127	514288.6	 5.97		  7.89		 4.65		 6.04
 255	516889.7	11.86		 15.58		 8.96		12.55
 511	519802.4	23.10		 28.81		16.95		26.19
1023	520802.7	45.30		 52.51		33.19		45.95
2047	519997.1	90.63		104.00		65.26		81.74

>From the above data, to restrict the allocation/freeing latency to be less
than 100 us in most times, the max batch scale factor needs to be less
than or equal to 5.

Although it is reasonable to use 5 as max batch scale factor for the
systems tested, there are also slower systems.  Where smaller value should
be used to constrain the page allocation/freeing latency.

So, in this patch, a new kconfig option (PCP_BATCH_SCALE_MAX) is added to
set the max batch scale factor.  Whose default value is 5, and users can
reduce it when necessary.

Link: https://lkml.kernel.org/r/20231016053002.756205-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 66eca1021a42 ("mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/Kconfig      | 11 +++++++++++
 mm/page_alloc.c |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/mm/Kconfig b/mm/Kconfig
index 264a2df5ecf5b..ece4f2847e2b4 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -704,6 +704,17 @@ config HUGETLB_PAGE_SIZE_VARIABLE
 config CONTIG_ALLOC
 	def_bool (MEMORY_ISOLATION && COMPACTION) || CMA
 
+config PCP_BATCH_SCALE_MAX
+	int "Maximum scale factor of PCP (Per-CPU pageset) batch allocate/free"
+	default 5
+	range 0 6
+	help
+	  In page allocator, PCP (Per-CPU pageset) is refilled and drained in
+	  batches.  The batch number is scaled automatically to improve page
+	  allocation/free throughput.  But too large scale factor may hurt
+	  latency.  This option sets the upper limit of scale factor to limit
+	  the maximum latency.
+
 config PHYS_ADDR_T_64BIT
 	def_bool 64BIT
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e99d3223f0fc2..d3a2c4d3dc3eb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2343,7 +2343,7 @@ static int nr_pcp_free(struct per_cpu_pages *pcp, int high, bool free_high)
 	 * freeing of pages without any allocation.
 	 */
 	batch <<= pcp->free_factor;
-	if (batch < max_nr_free)
+	if (batch < max_nr_free && pcp->free_factor < CONFIG_PCP_BATCH_SCALE_MAX)
 		pcp->free_factor++;
 	batch = clamp(batch, min_nr_free, max_nr_free);
 
-- 
2.43.0

[PATCH 6.6 038/121] mm: page_alloc: control latency caused by zone PCP draining

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit 55f77df7d715110299f12c27f4365bd6332d1adb ]

Patch series "mm/treewide: Remove pXd_huge() API", v2.

In previous work [1], we removed the pXd_large() API, which is arch
specific.  This patchset further removes the hugetlb pXd_huge() API.

Hugetlb was never special on creating huge mappings when compared with
other huge mappings.  Having a standalone API just to detect such pgtable
entries is more or less redundant, especially after the pXd_leaf() API set
is introduced with/without CONFIG_HUGETLB_PAGE.

When looking at this problem, a few issues are also exposed that we don't
have a clear definition of the *_huge() variance API.  This patchset
started by cleaning these issues first, then replace all *_huge() users to
use *_leaf(), then drop all *_huge() code.

On x86/sparc, swap entries will be reported "true" in pXd_huge(), while
for all the rest archs they're reported "false" instead.  This part is
done in patch 1-5, in which I suspect patch 1 can be seen as a bug fix,
but I'll leave that to hmm experts to decide.

Besides, there are three archs (arm, arm64, powerpc) that have slightly
different definitions between the *_huge() v.s.  *_leaf() variances.  I
tackled them separately so that it'll be easier for arch experts to chim
in when necessary.  This part is done in patch 6-9.

The final patches 10-14 do the rest on the final removal, since *_leaf()
will be the ultimate API in the future, and we seem to have quite some
confusions on how *_huge() APIs can be defined, provide a rich comment for
*_leaf() API set to define them properly to avoid future misuse, and
hopefully that'll also help new archs to start support huge mappings and
avoid traps (like either swap entries, or PROT_NONE entry checks).

[1] https://lore.kernel.org/r/20240305043750.93762-1-peterx@redhat.com

This patch (of 14):

When the complete PCP is drained a much larger number of pages than the
usual batch size might be freed at once, causing large IRQ and preemption
latency spikes, as they are all freed while holding the pcp and zone
spinlocks.

To avoid those latency spikes, limit the number of pages freed in a single
bulk operation to common batch limits.

Link: https://lkml.kernel.org/r/20240318200404.448346-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240318200736.2835502-1-l.stach@pengutronix.de
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 66eca1021a42 ("mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page_alloc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d3a2c4d3dc3eb..2c40cf4f1eb2d 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2185,12 +2185,15 @@ void drain_zone_pages(struct zone *zone, struct per_cpu_pages *pcp)
  */
 static void drain_pages_zone(unsigned int cpu, struct zone *zone)
 {
-	struct per_cpu_pages *pcp;
+	struct per_cpu_pages *pcp = per_cpu_ptr(zone->per_cpu_pageset, cpu);
+	int count = READ_ONCE(pcp->count);
+
+	while (count) {
+		int to_drain = min(count, pcp->batch << CONFIG_PCP_BATCH_SCALE_MAX);
+		count -= to_drain;
 
-	pcp = per_cpu_ptr(zone->per_cpu_pageset, cpu);
-	if (pcp->count) {
 		spin_lock(&pcp->lock);
-		free_pcppages_bulk(zone, pcp->count, pcp, 0);
+		free_pcppages_bulk(zone, to_drain, pcp, 0);
 		spin_unlock(&pcp->lock);
 	}
 }
-- 
2.43.0

[PATCH 6.6 039/121] mm/page_alloc: fix pcp->count race between drain_pages_zone() vs __rmqueue_pcplist()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Zhijian <lizhijian@fujitsu.com>

[ Upstream commit 66eca1021a42856d6af2a9802c99e160278aed91 ]

It's expected that no page should be left in pcp_list after calling
zone_pcp_disable() in offline_pages().  Previously, it's observed that
offline_pages() gets stuck [1] due to some pages remaining in pcp_list.

Cause:
There is a race condition between drain_pages_zone() and __rmqueue_pcplist()
involving the pcp->count variable. See below scenario:

         CPU0                              CPU1
    ----------------                    ---------------
                                      spin_lock(&pcp->lock);
                                      __rmqueue_pcplist() {
zone_pcp_disable() {
                                        /* list is empty */
                                        if (list_empty(list)) {
                                          /* add pages to pcp_list */
                                          alloced = rmqueue_bulk()
  mutex_lock(&pcp_batch_high_lock)
  ...
  __drain_all_pages() {
    drain_pages_zone() {
      /* read pcp->count, it's 0 here */
      count = READ_ONCE(pcp->count)
      /* 0 means nothing to drain */
                                          /* update pcp->count */
                                          pcp->count += alloced << order;
      ...
                                      ...
                                      spin_unlock(&pcp->lock);

In this case, after calling zone_pcp_disable() though, there are still some
pages in pcp_list. And these pages in pcp_list are neither movable nor
isolated, offline_pages() gets stuck as a result.

Solution:
Expand the scope of the pcp->lock to also protect pcp->count in
drain_pages_zone(), to ensure no pages are left in the pcp list after
zone_pcp_disable()

[1] https://lore.kernel.org/linux-mm/6a07125f-e720-404c-b2f9-e55f3f166e85@fujitsu.com/

Link: https://lkml.kernel.org/r/20240723064428.1179519-1-lizhijian@fujitsu.com
Fixes: 4b23a68f9536 ("mm/page_alloc: protect PCP lists with a spinlock")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reported-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page_alloc.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2c40cf4f1eb2d..39bdbfb5313fb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2186,16 +2186,20 @@ void drain_zone_pages(struct zone *zone, struct per_cpu_pages *pcp)
 static void drain_pages_zone(unsigned int cpu, struct zone *zone)
 {
 	struct per_cpu_pages *pcp = per_cpu_ptr(zone->per_cpu_pageset, cpu);
-	int count = READ_ONCE(pcp->count);
-
-	while (count) {
-		int to_drain = min(count, pcp->batch << CONFIG_PCP_BATCH_SCALE_MAX);
-		count -= to_drain;
+	int count;
 
+	do {
 		spin_lock(&pcp->lock);
-		free_pcppages_bulk(zone, to_drain, pcp, 0);
+		count = pcp->count;
+		if (count) {
+			int to_drain = min(count,
+				pcp->batch << CONFIG_PCP_BATCH_SCALE_MAX);
+
+			free_pcppages_bulk(zone, to_drain, pcp, 0);
+			count -= to_drain;
+		}
 		spin_unlock(&pcp->lock);
-	}
+	} while (count);
 }
 
 /*
-- 
2.43.0

[PATCH 6.6 040/121] f2fs: fix to avoid use SSR allocate when do defragment

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhiguo Niu <zhiguo.niu@unisoc.com>

[ Upstream commit 21327a042dd94bc73181d7300e688699cb1f467e ]

SSR allocate mode will be used when doing file defragment
if ATGC is working at the same time, that is because
set_page_private_gcing may make CURSEG_ALL_DATA_ATGC segment
type got in f2fs_allocate_data_block when defragment page
is writeback, which may cause file fragmentation is worse.

A file with 2 fragmentations is changed as following after defragment:

----------------file info-------------------
sensorsdata :
--------------------------------------------
dev       [254:48]
ino       [0x    3029 : 12329]
mode      [0x    81b0 : 33200]
nlink     [0x       1 : 1]
uid       [0x    27e6 : 10214]
gid       [0x    27e6 : 10214]
size      [0x  242000 : 2367488]
blksize   [0x    1000 : 4096]
blocks    [0x    1210 : 4624]
--------------------------------------------

file_pos   start_blk     end_blk        blks
       0    11361121    11361207          87
  356352    11361215    11361216           2
  364544    11361218    11361218           1
  368640    11361220    11361221           2
  376832    11361224    11361225           2
  385024    11361227    11361238          12
  434176    11361240    11361252          13
  487424    11361254    11361254           1
  491520    11361271    11361279           9
  528384     3681794     3681795           2
  536576     3681797     3681797           1
  540672     3681799     3681799           1
  544768     3681803     3681803           1
  548864     3681805     3681805           1
  552960     3681807     3681807           1
  557056     3681809     3681809           1

Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 8cb1f4080dd9 ("f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 22080606b8769..6d6c47df36ec0 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3350,7 +3350,8 @@ static int __get_segment_type_6(struct f2fs_io_info *fio)
 		if (page_private_gcing(fio->page)) {
 			if (fio->sbi->am.atgc_enabled &&
 				(fio->io_type == FS_DATA_IO) &&
-				(fio->sbi->gc_mode != GC_URGENT_HIGH))
+				(fio->sbi->gc_mode != GC_URGENT_HIGH) &&
+				!is_inode_flag_set(inode, FI_OPU_WRITE))
 				return CURSEG_ALL_DATA_ATGC;
 			else
 				return CURSEG_COLD_DATA;
-- 
2.43.0

[PATCH 6.6 041/121] f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 8cb1f4080dd91c6e6b01dbea013a3f42341cb6a1 ]

mkdir /mnt/test/comp
f2fs_io setflags compression /mnt/test/comp
dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1
truncate --size 13 /mnt/test/comp/testfile

In the above scenario, we can get a BUG_ON.
 kernel BUG at fs/f2fs/segment.c:3589!
 Call Trace:
  do_write_page+0x78/0x390 [f2fs]
  f2fs_outplace_write_data+0x62/0xb0 [f2fs]
  f2fs_do_write_data_page+0x275/0x740 [f2fs]
  f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs]
  f2fs_write_multi_pages+0x1e5/0xae0 [f2fs]
  f2fs_write_cache_pages+0xab1/0xc60 [f2fs]
  f2fs_write_data_pages+0x2d8/0x330 [f2fs]
  do_writepages+0xcf/0x270
  __writeback_single_inode+0x44/0x350
  writeback_sb_inodes+0x242/0x530
  __writeback_inodes_wb+0x54/0xf0
  wb_writeback+0x192/0x310
  wb_workfn+0x30d/0x400

The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the
page was set the gcing flag by set_cluster_dirty().

Cc: stable@vger.kernel.org
Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration")
Reviewed-by: Chao Yu <chao@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 6d6c47df36ec0..804958c6de34c 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3351,6 +3351,7 @@ static int __get_segment_type_6(struct f2fs_io_info *fio)
 			if (fio->sbi->am.atgc_enabled &&
 				(fio->io_type == FS_DATA_IO) &&
 				(fio->sbi->gc_mode != GC_URGENT_HIGH) &&
+				__is_valid_data_blkaddr(fio->old_blkaddr) &&
 				!is_inode_flag_set(inode, FI_OPU_WRITE))
 				return CURSEG_ALL_DATA_ATGC;
 			else
-- 
2.43.0

[PATCH 6.6 042/121] dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Frank Li <Frank.Li@nxp.com>

[ Upstream commit e0a08ed25492b6437e366b347113db484037b9b9 ]

iMX95 move channel mux register to management page address space. This
prepare to support iMX95.

Add mux_addr in struct fsl_edma_chan. No function change.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231221153528.1588049-4-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ddad5589970 ("dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/fsl-edma-common.c | 6 +++---
 drivers/dma/fsl-edma-common.h | 3 +++
 drivers/dma/fsl-edma-main.c   | 3 +++
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index 793f1a7ad5e34..d42e48ce5de44 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -97,8 +97,8 @@ static void fsl_edma3_enable_request(struct fsl_edma_chan *fsl_chan)
 		 * ch_mux: With the exception of 0, attempts to write a value
 		 * already in use will be forced to 0.
 		 */
-		if (!edma_readl_chreg(fsl_chan, ch_mux))
-			edma_writel_chreg(fsl_chan, fsl_chan->srcid, ch_mux);
+		if (!edma_readl(fsl_chan->edma, fsl_chan->mux_addr))
+			edma_writel(fsl_chan->edma, fsl_chan->srcid, fsl_chan->mux_addr);
 	}
 
 	val = edma_readl_chreg(fsl_chan, ch_csr);
@@ -134,7 +134,7 @@ static void fsl_edma3_disable_request(struct fsl_edma_chan *fsl_chan)
 	flags = fsl_edma_drvflags(fsl_chan);
 
 	if (flags & FSL_EDMA_DRV_HAS_CHMUX)
-		edma_writel_chreg(fsl_chan, 0, ch_mux);
+		edma_writel(fsl_chan->edma, 0, fsl_chan->mux_addr);
 
 	val &= ~EDMA_V3_CH_CSR_ERQ;
 	edma_writel_chreg(fsl_chan, val, ch_csr);
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index 92fe53faa53b1..b567da379fc33 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -146,6 +146,7 @@ struct fsl_edma_chan {
 	enum dma_data_direction		dma_dir;
 	char				chan_name[32];
 	struct fsl_edma_hw_tcd __iomem *tcd;
+	void __iomem			*mux_addr;
 	u32				real_count;
 	struct work_struct		issue_worker;
 	struct platform_device		*pdev;
@@ -207,6 +208,8 @@ struct fsl_edma_drvdata {
 	u32			chreg_off;
 	u32			chreg_space_sz;
 	u32			flags;
+	u32			mux_off;	/* channel mux register offset */
+	u32			mux_skip;	/* how much skip for each channel */
 	int			(*setup_irq)(struct platform_device *pdev,
 					     struct fsl_edma_engine *fsl_edma);
 };
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index 42a338cbe6143..de4f548f0ad87 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -364,6 +364,8 @@ static struct fsl_edma_drvdata imx93_data4 = {
 	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA4,
 	.chreg_space_sz = 0x8000,
 	.chreg_off = 0x10000,
+	.mux_off = 0x10000 + offsetof(struct fsl_edma3_ch_reg, ch_mux),
+	.mux_skip = 0x8000,
 	.setup_irq = fsl_edma3_irq_init,
 };
 
@@ -540,6 +542,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 				offsetof(struct fsl_edma3_ch_reg, tcd) : 0;
 		fsl_chan->tcd = fsl_edma->membase
 				+ i * drvdata->chreg_space_sz + drvdata->chreg_off + len;
+		fsl_chan->mux_addr = fsl_edma->membase + drvdata->mux_off + i * drvdata->mux_skip;
 
 		fsl_chan->pdev = pdev;
 		vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);
-- 
2.43.0

[PATCH 6.6 043/121] dmaengine: fsl-edma: add i.MX8ULP edma support

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joy Zou <joy.zou@nxp.com>

[ Upstream commit d8d4355861d874cbd1395ec0edcbe4e0f6940738 ]

Add support for the i.MX8ULP platform to the eDMA driver. Introduce the use
of the correct FSL_EDMA_DRV_HAS_CHCLK flag to handle per-channel clock
configurations.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-5-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ddad5589970 ("dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/fsl-edma-common.c |  6 ++++++
 drivers/dma/fsl-edma-main.c   | 22 ++++++++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index d42e48ce5de44..12e605a756cad 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -3,6 +3,7 @@
 // Copyright (c) 2013-2014 Freescale Semiconductor, Inc
 // Copyright (c) 2017 Sysam, Angelo Dureghello  <angelo@sysam.it>
 
+#include <linux/clk.h>
 #include <linux/dmapool.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -802,6 +803,9 @@ int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
 
+	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_HAS_CHCLK)
+		clk_prepare_enable(fsl_chan->clk);
+
 	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
 				sizeof(struct fsl_edma_hw_tcd),
 				32, 0);
@@ -829,6 +833,8 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan)
 	fsl_chan->tcd_pool = NULL;
 	fsl_chan->is_sw = false;
 	fsl_chan->srcid = 0;
+	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_HAS_CHCLK)
+		clk_disable_unprepare(fsl_chan->clk);
 }
 
 void fsl_edma_cleanup_vchan(struct dma_device *dmadev)
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index de4f548f0ad87..4a3edba315887 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -353,6 +353,16 @@ static struct fsl_edma_drvdata imx8qm_audio_data = {
 	.setup_irq = fsl_edma3_irq_init,
 };
 
+static struct fsl_edma_drvdata imx8ulp_data = {
+	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_CHCLK | FSL_EDMA_DRV_HAS_DMACLK |
+		 FSL_EDMA_DRV_EDMA3,
+	.chreg_space_sz = 0x10000,
+	.chreg_off = 0x10000,
+	.mux_off = 0x10000 + offsetof(struct fsl_edma3_ch_reg, ch_mux),
+	.mux_skip = 0x10000,
+	.setup_irq = fsl_edma3_irq_init,
+};
+
 static struct fsl_edma_drvdata imx93_data3 = {
 	.flags = FSL_EDMA_DRV_HAS_DMACLK | FSL_EDMA_DRV_EDMA3,
 	.chreg_space_sz = 0x10000,
@@ -375,6 +385,7 @@ static const struct of_device_id fsl_edma_dt_ids[] = {
 	{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
 	{ .compatible = "fsl,imx8qm-edma", .data = &imx8qm_data},
 	{ .compatible = "fsl,imx8qm-adma", .data = &imx8qm_audio_data},
+	{ .compatible = "fsl,imx8ulp-edma", .data = &imx8ulp_data},
 	{ .compatible = "fsl,imx93-edma3", .data = &imx93_data3},
 	{ .compatible = "fsl,imx93-edma4", .data = &imx93_data4},
 	{ /* sentinel */ }
@@ -429,6 +440,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 	struct fsl_edma_engine *fsl_edma;
 	const struct fsl_edma_drvdata *drvdata = NULL;
 	u32 chan_mask[2] = {0, 0};
+	char clk_name[36];
 	struct edma_regs *regs;
 	int chans;
 	int ret, i;
@@ -544,11 +556,21 @@ static int fsl_edma_probe(struct platform_device *pdev)
 				+ i * drvdata->chreg_space_sz + drvdata->chreg_off + len;
 		fsl_chan->mux_addr = fsl_edma->membase + drvdata->mux_off + i * drvdata->mux_skip;
 
+		if (drvdata->flags & FSL_EDMA_DRV_HAS_CHCLK) {
+			snprintf(clk_name, sizeof(clk_name), "ch%02d", i);
+			fsl_chan->clk = devm_clk_get_enabled(&pdev->dev,
+							     (const char *)clk_name);
+
+			if (IS_ERR(fsl_chan->clk))
+				return PTR_ERR(fsl_chan->clk);
+		}
 		fsl_chan->pdev = pdev;
 		vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);
 
 		edma_write_tcdreg(fsl_chan, 0, csr);
 		fsl_edma_chan_mux(fsl_chan, 0, false);
+		if (fsl_chan->edma->drvdata->flags & FSL_EDMA_DRV_HAS_CHCLK)
+			clk_disable_unprepare(fsl_chan->clk);
 	}
 
 	ret = fsl_edma->drvdata->setup_irq(pdev, fsl_edma);
-- 
2.43.0

[PATCH 6.6 044/121] dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joy Zou <joy.zou@nxp.com>

[ Upstream commit 77584368a0f3d9eba112c3df69f1df7f282dbfe9 ]

The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
So remove the workaround safely.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240424064508.1886764-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8ddad5589970 ("dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/fsl-edma-common.c | 16 ++++------------
 drivers/dma/fsl-edma-common.h |  2 --
 drivers/dma/fsl-edma-main.c   |  8 --------
 3 files changed, 4 insertions(+), 22 deletions(-)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index 12e605a756cad..a1ac404977fd8 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -75,18 +75,10 @@ static void fsl_edma3_enable_request(struct fsl_edma_chan *fsl_chan)
 
 	flags = fsl_edma_drvflags(fsl_chan);
 	val = edma_readl_chreg(fsl_chan, ch_sbr);
-	/* Remote/local swapped wrongly on iMX8 QM Audio edma */
-	if (flags & FSL_EDMA_DRV_QUIRK_SWAPPED) {
-		if (!fsl_chan->is_rxchan)
-			val |= EDMA_V3_CH_SBR_RD;
-		else
-			val |= EDMA_V3_CH_SBR_WR;
-	} else {
-		if (fsl_chan->is_rxchan)
-			val |= EDMA_V3_CH_SBR_RD;
-		else
-			val |= EDMA_V3_CH_SBR_WR;
-	}
+	if (fsl_chan->is_rxchan)
+		val |= EDMA_V3_CH_SBR_RD;
+	else
+		val |= EDMA_V3_CH_SBR_WR;
 
 	if (fsl_chan->is_remote)
 		val &= ~(EDMA_V3_CH_SBR_RD | EDMA_V3_CH_SBR_WR);
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index b567da379fc33..20e29a42fcd8d 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -178,8 +178,6 @@ struct fsl_edma_desc {
 #define FSL_EDMA_DRV_HAS_PD		BIT(5)
 #define FSL_EDMA_DRV_HAS_CHCLK		BIT(6)
 #define FSL_EDMA_DRV_HAS_CHMUX		BIT(7)
-/* imx8 QM audio edma remote local swapped */
-#define FSL_EDMA_DRV_QUIRK_SWAPPED	BIT(8)
 /* control and status register is in tcd address space, edma3 reg layout */
 #define FSL_EDMA_DRV_SPLIT_REG		BIT(9)
 #define FSL_EDMA_DRV_BUS_8BYTE		BIT(10)
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index 4a3edba315887..c96b893d2ac35 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -346,13 +346,6 @@ static struct fsl_edma_drvdata imx8qm_data = {
 	.setup_irq = fsl_edma3_irq_init,
 };
 
-static struct fsl_edma_drvdata imx8qm_audio_data = {
-	.flags = FSL_EDMA_DRV_QUIRK_SWAPPED | FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3,
-	.chreg_space_sz = 0x10000,
-	.chreg_off = 0x10000,
-	.setup_irq = fsl_edma3_irq_init,
-};
-
 static struct fsl_edma_drvdata imx8ulp_data = {
 	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_CHCLK | FSL_EDMA_DRV_HAS_DMACLK |
 		 FSL_EDMA_DRV_EDMA3,
@@ -384,7 +377,6 @@ static const struct of_device_id fsl_edma_dt_ids[] = {
 	{ .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data},
 	{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
 	{ .compatible = "fsl,imx8qm-edma", .data = &imx8qm_data},
-	{ .compatible = "fsl,imx8qm-adma", .data = &imx8qm_audio_data},
 	{ .compatible = "fsl,imx8ulp-edma", .data = &imx8ulp_data},
 	{ .compatible = "fsl,imx93-edma3", .data = &imx93_data3},
 	{ .compatible = "fsl,imx93-edma4", .data = &imx93_data4},
-- 
2.43.0

[PATCH 6.6 045/121] dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joy Zou <joy.zou@nxp.com>

[ Upstream commit 8ddad558997002ce67980e30c9e8dfaa696e163b ]

Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.

Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.

iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.

The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/fsl-edma-common.c | 3 +++
 drivers/dma/fsl-edma-common.h | 1 +
 drivers/dma/fsl-edma-main.c   | 2 +-
 3 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index a1ac404977fd8..53fdfd32a7e77 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -747,6 +747,8 @@ struct dma_async_tx_descriptor *fsl_edma_prep_memcpy(struct dma_chan *chan,
 	fsl_desc->iscyclic = false;
 
 	fsl_chan->is_sw = true;
+	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_MEM_REMOTE)
+		fsl_chan->is_remote = true;
 
 	/* To match with copy_align and max_seg_size so 1 tcd is enough */
 	fsl_edma_fill_tcd(fsl_chan, fsl_desc->tcd[0].vtcd, dma_src, dma_dst,
@@ -825,6 +827,7 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan)
 	fsl_chan->tcd_pool = NULL;
 	fsl_chan->is_sw = false;
 	fsl_chan->srcid = 0;
+	fsl_chan->is_remote = false;
 	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_HAS_CHCLK)
 		clk_disable_unprepare(fsl_chan->clk);
 }
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index 20e29a42fcd8d..6028389de408b 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -178,6 +178,7 @@ struct fsl_edma_desc {
 #define FSL_EDMA_DRV_HAS_PD		BIT(5)
 #define FSL_EDMA_DRV_HAS_CHCLK		BIT(6)
 #define FSL_EDMA_DRV_HAS_CHMUX		BIT(7)
+#define FSL_EDMA_DRV_MEM_REMOTE		BIT(8)
 /* control and status register is in tcd address space, edma3 reg layout */
 #define FSL_EDMA_DRV_SPLIT_REG		BIT(9)
 #define FSL_EDMA_DRV_BUS_8BYTE		BIT(10)
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index c96b893d2ac35..8a0ae90548997 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -340,7 +340,7 @@ static struct fsl_edma_drvdata imx7ulp_data = {
 };
 
 static struct fsl_edma_drvdata imx8qm_data = {
-	.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3,
+	.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_MEM_REMOTE,
 	.chreg_space_sz = 0x10000,
 	.chreg_off = 0x10000,
 	.setup_irq = fsl_edma3_irq_init,
-- 
2.43.0

[PATCH 6.6 046/121] perf: imx_perf: fix counter start and config sequence

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xu Yang <xu.yang_2@nxp.com>

[ Upstream commit ac9aa295f7a89d38656739628796f086f0b160e2 ]

In current driver, the counter will start firstly and then be configured.
This sequence is not correct for AXI filter events since the correct
AXI_MASK and AXI_ID are not set yet. Then the results may be inaccurate.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Fixes: 55691f99d417 ("drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver")
cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240529080358.703784-5-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/fsl_imx9_ddr_perf.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/perf/fsl_imx9_ddr_perf.c b/drivers/perf/fsl_imx9_ddr_perf.c
index 5cf770a1bc312..4f6eade522024 100644
--- a/drivers/perf/fsl_imx9_ddr_perf.c
+++ b/drivers/perf/fsl_imx9_ddr_perf.c
@@ -476,12 +476,12 @@ static int ddr_perf_event_add(struct perf_event *event, int flags)
 	hwc->idx = counter;
 	hwc->state |= PERF_HES_STOPPED;
 
-	if (flags & PERF_EF_START)
-		ddr_perf_event_start(event, flags);
-
 	/* read trans, write trans, read beat */
 	ddr_perf_monitor_config(pmu, cfg, cfg1, cfg2);
 
+	if (flags & PERF_EF_START)
+		ddr_perf_event_start(event, flags);
+
 	return 0;
 }
 
-- 
2.43.0

[PATCH 6.6 047/121] MIPS: Loongson64: DTS: Fix PCIe port nodes for ls7a

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit d89a415ff8d5e0aad4963f2d8ebb0f9e8110b7fa ]

Add various required properties to silent warnings:

arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:116.16-297.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: dbb69b9d6234 ("MIPS: dts: loongson: Fix liointc IRQ polarity")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/loongson/loongson64-2k1000.dtsi  | 37 +++++++++++++++----
 1 file changed, 30 insertions(+), 7 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index c0be84a6e81fd..c1d3092fdd870 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -117,7 +117,6 @@ pci@1a000000 {
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <2>;
 
 			reg = <0 0x1a000000 0 0x02000000>,
 				<0xfe 0x00000000 0 0x20000000>;
@@ -205,93 +204,117 @@ sata@8,0 {
 				interrupt-parent = <&liointc0>;
 			};
 
-			pci_bridge@9,0 {
+			pcie@9,0 {
 				compatible = "pci0014,7a19.0",
 						   "pci0014,7a19",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
 				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@a,0 {
+			pcie@a,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
 				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@b,0 {
+			pcie@b,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
 				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@c,0 {
+			pcie@c,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@d,0 {
+			pcie@d,0 {
 				compatible = "pci0014,7a19.0",
 						   "pci0014,7a19",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
 				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+				ranges;
 				external-facing;
 			};
 
-			pci_bridge@e,0 {
+			pcie@e,0 {
 				compatible = "pci0014,7a09.0",
 						   "pci0014,7a09",
 						   "pciclass060400",
 						   "pciclass0604";
 
 				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
 				#interrupt-cells = <1>;
 				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+				ranges;
 				external-facing;
 			};
 
-- 
2.43.0

[PATCH 6.6 048/121] MIPS: dts: loongson: Fix liointc IRQ polarity

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit dbb69b9d6234aad23b3ecd33e5bc8a8ae1485b7d ]

All internal liointc interrupts are high level triggered.

Fixes: b1a792601f26 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/loongson/loongson64-2k1000.dtsi  | 42 +++++++++----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index c1d3092fdd870..eec8243be6499 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -100,7 +100,7 @@ rtc0: rtc@1fe07800 {
 			compatible = "loongson,ls2k1000-rtc";
 			reg = <0 0x1fe07800 0 0x78>;
 			interrupt-parent = <&liointc0>;
-			interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		uart0: serial@1fe00000 {
@@ -108,7 +108,7 @@ uart0: serial@1fe00000 {
 			reg = <0 0x1fe00000 0 0x8>;
 			clock-frequency = <125000000>;
 			interrupt-parent = <&liointc0>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 			no-loopback-test;
 		};
 
@@ -131,8 +131,8 @@ gmac@3,0 {
 						   "pciclass0c03";
 
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
-					     <13 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
 				phy-mode = "rgmii-id";
@@ -155,8 +155,8 @@ gmac@3,1 {
 						   "loongson, pci-gmac";
 
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
-					     <15 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				interrupt-parent = <&liointc0>;
 				phy-mode = "rgmii-id";
@@ -178,7 +178,7 @@ ehci@4,1 {
 						   "pciclass0c03";
 
 				reg = <0x2100 0x0 0x0 0x0 0x0>;
-				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -189,7 +189,7 @@ ohci@4,2 {
 						   "pciclass0c03";
 
 				reg = <0x2200 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 			};
 
@@ -200,7 +200,7 @@ sata@8,0 {
 						   "pciclass0106";
 
 				reg = <0x4000 0x0 0x0 0x0 0x0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc0>;
 			};
 
@@ -215,10 +215,10 @@ pcie@9,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -234,10 +234,10 @@ pcie@a,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -253,10 +253,10 @@ pcie@b,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -272,10 +272,10 @@ pcie@c,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -291,10 +291,10 @@ pcie@d,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
@@ -310,10 +310,10 @@ pcie@e,0 {
 				#size-cells = <2>;
 				device_type = "pci";
 				#interrupt-cells = <1>;
-				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&liointc1>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
 				ranges;
 				external-facing;
 			};
-- 
2.43.0

[PATCH 6.6 049/121] MIPS: dts: loongson: Fix ls2k1000-rtc interrupt

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit f70fd92df7529e7283e02a6c3a2510075f13ba30 ]

The correct interrupt line for RTC is line 8 on liointc1.

Fixes: e47084e116fc ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index eec8243be6499..cc7747c5f21f3 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -99,8 +99,8 @@ liointc1: interrupt-controller@1fe11440 {
 		rtc0: rtc@1fe07800 {
 			compatible = "loongson,ls2k1000-rtc";
 			reg = <0 0x1fe07800 0 0x78>;
-			interrupt-parent = <&liointc0>;
-			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		uart0: serial@1fe00000 {
-- 
2.43.0

[PATCH 6.6 050/121] ARM: 9406/1: Fix callchain_trace() return value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit 4e7b4ff2dcaed228cb2fb7bfe720262c98ec1bb9 ]

perf_callchain_store() return 0 on success, -1 otherwise, fix
callchain_trace() to return correct bool value. So walk_stackframe() can
have a chance to stop walking the stack ahead.

Fixes: 70ccc7c0667b ("ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/perf_callchain.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/kernel/perf_callchain.c b/arch/arm/kernel/perf_callchain.c
index 7147edbe56c67..1d230ac9d0eb5 100644
--- a/arch/arm/kernel/perf_callchain.c
+++ b/arch/arm/kernel/perf_callchain.c
@@ -85,8 +85,7 @@ static bool
 callchain_trace(void *data, unsigned long pc)
 {
 	struct perf_callchain_entry_ctx *entry = data;
-	perf_callchain_store(entry, pc);
-	return true;
+	return perf_callchain_store(entry, pc) == 0;
 }
 
 void
-- 
2.43.0

[PATCH 6.6 051/121] HID: amd_sfh: Move sensor discovery before HID device initialization

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>

[ Upstream commit 8031b001da700474c11d28629581480b12a0d8d4 ]

Sensors discovery is independent of HID device initialization. If sensor
discovery fails after HID initialization, then the HID device needs to be
deinitialized. Therefore, sensors discovery should be moved before HID
device initialization.

Fixes: 7bcfdab3f0c6 ("HID: amd_sfh: if no sensors are enabled, clean up")
Tested-by: Aurinko <petrvelicka@tuta.io>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://patch.msgid.link/20240718111616.3012155-1-Basavaraj.Natikar@amd.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/amd-sfh-hid/amd_sfh_client.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_client.c b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
index bdb578e0899f5..4b59687ff5d82 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
@@ -288,12 +288,22 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
 		mp2_ops->start(privdata, info);
 		cl_data->sensor_sts[i] = amd_sfh_wait_for_response
 						(privdata, cl_data->sensor_idx[i], SENSOR_ENABLED);
+
+		if (cl_data->sensor_sts[i] == SENSOR_ENABLED)
+			cl_data->is_any_sensor_enabled = true;
+	}
+
+	if (!cl_data->is_any_sensor_enabled ||
+	    (mp2_ops->discovery_status && mp2_ops->discovery_status(privdata) == 0)) {
+		dev_warn(dev, "Failed to discover, sensors not enabled is %d\n",
+			 cl_data->is_any_sensor_enabled);
+		rc = -EOPNOTSUPP;
+		goto cleanup;
 	}
 
 	for (i = 0; i < cl_data->num_hid_devices; i++) {
 		cl_data->cur_hid_dev = i;
 		if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
-			cl_data->is_any_sensor_enabled = true;
 			rc = amdtp_hid_probe(i, cl_data);
 			if (rc)
 				goto cleanup;
@@ -305,12 +315,6 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev *privdata)
 			cl_data->sensor_sts[i]);
 	}
 
-	if (!cl_data->is_any_sensor_enabled ||
-	   (mp2_ops->discovery_status && mp2_ops->discovery_status(privdata) == 0)) {
-		dev_warn(dev, "Failed to discover, sensors not enabled is %d\n", cl_data->is_any_sensor_enabled);
-		rc = -EOPNOTSUPP;
-		goto cleanup;
-	}
 	schedule_delayed_work(&cl_data->work_buffer, msecs_to_jiffies(AMD_SFH_IDLE_LOOP));
 	return 0;
 
-- 
2.43.0

[PATCH 6.6 052/121] perf tool: fix dereferencing NULL al->maps

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Casey Chen <cachen@purestorage.com>

[ Upstream commit 4c17736689ccfc44ec7dcc472577f25c34cf8724 ]

With 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions"),
when cpumode is 3 (macro PERF_RECORD_MISC_HYPERVISOR),
thread__find_map() could return with al->maps being NULL.

The path below could add a callchain_cursor_node with NULL ms.maps.

add_callchain_ip()
  thread__find_symbol(.., &al)
    thread__find_map(.., &al)   // al->maps becomes NULL
  ms.maps = maps__get(al.maps)
  callchain_cursor_append(..., &ms, ...)
    node->ms.maps = maps__get(ms->maps)

Then the path below would dereference NULL maps and get segfault.

fill_callchain_info()
  maps__machine(node->ms.maps);

Fix it by checking if maps is NULL in fill_callchain_info().

Fixes: 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: yzhong@purestorage.com
Link: https://lore.kernel.org/r/20240722211548.61455-1-cachen@purestorage.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/callchain.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index aee937d14fbbf..09e6b4e1401c9 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -1126,7 +1126,7 @@ int hist_entry__append_callchain(struct hist_entry *he, struct perf_sample *samp
 int fill_callchain_info(struct addr_location *al, struct callchain_cursor_node *node,
 			bool hide_unresolved)
 {
-	struct machine *machine = maps__machine(node->ms.maps);
+	struct machine *machine = node->ms.maps ? maps__machine(node->ms.maps) : NULL;
 
 	maps__put(al->maps);
 	al->maps = maps__get(node->ms.maps);
-- 
2.43.0

[PATCH 6.6 053/121] drm/nouveau: prime: fix refcount underflow

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Danilo Krummrich <dakr@kernel.org>

[ Upstream commit a9bf3efc33f1fbf88787a277f7349459283c9b95 ]

Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and
hence the backing ttm_bo) leads to a refcount underflow.

Instead of calling nouveau_bo_ref() in the unwind path of
drm_gem_object_init(), clean things up manually.

Fixes: ab9ccb96a6e6 ("drm/nouveau: use prime helpers")
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718165959.3983-2-dakr@kernel.org
(cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5)
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_prime.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_prime.c b/drivers/gpu/drm/nouveau/nouveau_prime.c
index 1b2ff0c40fc1c..6c599a9f49ee4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_prime.c
+++ b/drivers/gpu/drm/nouveau/nouveau_prime.c
@@ -64,7 +64,8 @@ struct drm_gem_object *nouveau_gem_prime_import_sg_table(struct drm_device *dev,
 	 * to the caller, instead of a normal nouveau_bo ttm reference. */
 	ret = drm_gem_object_init(dev, &nvbo->bo.base, size);
 	if (ret) {
-		nouveau_bo_ref(NULL, &nvbo);
+		drm_gem_object_release(&nvbo->bo.base);
+		kfree(nvbo);
 		obj = ERR_PTR(-ENOMEM);
 		goto unlock;
 	}
-- 
2.43.0

[PATCH 6.6 054/121] drm/vmwgfx: Fix overlay when using Screen Targets

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Forbes <ian.forbes@broadcom.com>

[ Upstream commit cb372a505a994cb39aa75acfb8b3bcf94787cf94 ]

This code was never updated to support Screen Targets.
Fixes a bug where Xv playback displays a green screen instead of actual
video contents when 3D acceleration is disabled in the guest.

Fixes: c8261a961ece ("vmwgfx: Major KMS refactoring / cleanup in preparation of screen targets")
Reported-by: Doug Brown <doug@schmorgal.com>
Closes: https://lore.kernel.org/all/bd9cb3c7-90e8-435d-bc28-0e38fee58977@schmorgal.com
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Tested-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719163627.20888-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index c45b4724e4141..e20f64b67b266 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -92,7 +92,7 @@ static int vmw_overlay_send_put(struct vmw_private *dev_priv,
 {
 	struct vmw_escape_video_flush *flush;
 	size_t fifo_size;
-	bool have_so = (dev_priv->active_display_unit == vmw_du_screen_object);
+	bool have_so = (dev_priv->active_display_unit != vmw_du_legacy);
 	int i, num_items;
 	SVGAGuestPtr ptr;
 
-- 
2.43.0

[PATCH 6.6 055/121] drm/vmwgfx: Trigger a modeset when the screen moves

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Forbes <ian.forbes@broadcom.com>

[ Upstream commit 75c3e8a26a35d4f3eee299b3cc7e465f166f4e2d ]

When multi-monitor is cycled the X,Y position of the Screen Target will
likely change but the resolution will not. We need to trigger a modeset
when this occurs in order to recreate the Screen Target with the correct
X,Y position.

Fixes a bug where multiple displays are shown in a single scrollable
host window rather than in 2+ windows on separate host displays.

Fixes: 426826933109 ("drm/vmwgfx: Filter modes which exceed graphics memory")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624205951.23343-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 29 +++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
index 4ccab07faff08..cb03c589ab226 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
@@ -868,6 +868,32 @@ vmw_stdu_connector_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
+/*
+ * Trigger a modeset if the X,Y position of the Screen Target changes.
+ * This is needed when multi-mon is cycled. The original Screen Target will have
+ * the same mode but its relative X,Y position in the topology will change.
+ */
+static int vmw_stdu_connector_atomic_check(struct drm_connector *conn,
+					   struct drm_atomic_state *state)
+{
+	struct drm_connector_state *conn_state;
+	struct vmw_screen_target_display_unit *du;
+	struct drm_crtc_state *new_crtc_state;
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	du = vmw_connector_to_stdu(conn);
+
+	if (!conn_state->crtc)
+		return 0;
+
+	new_crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc);
+	if (du->base.gui_x != du->base.set_gui_x ||
+	    du->base.gui_y != du->base.set_gui_y)
+		new_crtc_state->mode_changed = true;
+
+	return 0;
+}
+
 static const struct drm_connector_funcs vmw_stdu_connector_funcs = {
 	.dpms = vmw_du_connector_dpms,
 	.detect = vmw_du_connector_detect,
@@ -882,7 +908,8 @@ static const struct drm_connector_funcs vmw_stdu_connector_funcs = {
 static const struct
 drm_connector_helper_funcs vmw_stdu_connector_helper_funcs = {
 	.get_modes = vmw_connector_get_modes,
-	.mode_valid = vmw_stdu_connector_mode_valid
+	.mode_valid = vmw_stdu_connector_mode_valid,
+	.atomic_check = vmw_stdu_connector_atomic_check,
 };
 
 
-- 
2.43.0

[PATCH 6.6 056/121] sched: act_ct: take care of padding in struct zones_ht_key

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 2191a54f63225b548fd8346be3611c3219a24738 ]

Blamed commit increased lookup key size from 2 bytes to 16 bytes,
because zones_ht_key got a struct net pointer.

Make sure rhashtable_lookup() is not using the padding bytes
which are not initialized.

 BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline]
 BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline]
 BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
 BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
 BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329
  rht_ptr_rcu include/linux/rhashtable.h:376 [inline]
  __rhashtable_lookup include/linux/rhashtable.h:607 [inline]
  rhashtable_lookup include/linux/rhashtable.h:646 [inline]
  rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
  tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329
  tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408
  tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425
  tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488
  tcf_action_add net/sched/act_api.c:2061 [inline]
  tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118
  rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647
  netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550
  rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665
  netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
  netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357
  netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x30f/0x380 net/socket.c:745
  ____sys_sendmsg+0x877/0xb60 net/socket.c:2597
  ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651
  __sys_sendmsg net/socket.c:2680 [inline]
  __do_sys_sendmsg net/socket.c:2689 [inline]
  __se_sys_sendmsg net/socket.c:2687 [inline]
  __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687
  x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Local variable key created at:
  tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324
  tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408

Fixes: 88c67aeb1407 ("sched: act_ct: add netns into the key of tcf_ct_flow_table")
Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_ct.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 3ac19516ed803..50d24e240e8fb 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -44,6 +44,8 @@ static DEFINE_MUTEX(zones_mutex);
 struct zones_ht_key {
 	struct net *net;
 	u16 zone;
+	/* Note : pad[] must be the last field. */
+	u8  pad[];
 };
 
 struct tcf_ct_flow_table {
@@ -60,7 +62,7 @@ struct tcf_ct_flow_table {
 static const struct rhashtable_params zones_params = {
 	.head_offset = offsetof(struct tcf_ct_flow_table, node),
 	.key_offset = offsetof(struct tcf_ct_flow_table, key),
-	.key_len = sizeof_field(struct tcf_ct_flow_table, key),
+	.key_len = offsetof(struct zones_ht_key, pad),
 	.automatic_shrinking = true,
 };
 
-- 
2.43.0

[PATCH 6.6 057/121] wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Veerendranath Jakkam <quic_vjakkam@quicinc.com>

[ Upstream commit baeaabf970b9a90999f62ae27edf63f6cb86c023 ]

Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.

To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.

Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/sme.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 9bba233b5a6ec..72d78dbc55ffd 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -1057,6 +1057,7 @@ void cfg80211_connect_done(struct net_device *dev,
 			cfg80211_hold_bss(
 				bss_from_pub(params->links[link].bss));
 		ev->cr.links[link].bss = params->links[link].bss;
+		ev->cr.links[link].status = params->links[link].status;
 
 		if (params->links[link].addr) {
 			ev->cr.links[link].addr = next;
-- 
2.43.0

[PATCH 6.6 058/121] net: phy: realtek: add support for RTL8366S Gigabit PHY

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Mentovai <mark@mentovai.com>

[ Upstream commit 225990c487c1023e7b3aa89beb6a68011fbc0461 ]

The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885be36 ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.

Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.

Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()")
Reported-by: Russell Senior <russell@personaltelco.net>
Closes: https://github.com/openwrt/openwrt/issues/15981
Link: https://github.com/openwrt/openwrt/issues/15739
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/realtek.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 337899c69738e..2604d9663a5b2 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -1083,6 +1083,13 @@ static struct phy_driver realtek_drvs[] = {
 		.handle_interrupt = genphy_handle_interrupt_no_ack,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
+	}, {
+		PHY_ID_MATCH_EXACT(0x001cc960),
+		.name		= "RTL8366S Gigabit Ethernet",
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.read_mmd	= genphy_read_mmd_unsupported,
+		.write_mmd	= genphy_write_mmd_unsupported,
 	},
 };
 
-- 
2.43.0

[PATCH 6.6 059/121] ALSA: hda: conexant: Reduce CONFIG_PM dependencies

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 29d57f6dc62485ee0752767debdfa2783d162beb ]

CONFIG_PM dependencies got reduced in HD-audio codec core driver, and
now it's time to reduce in HD-audio conexant codec driver, too.

Simply drop CONFIG_PM ifdefs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240506161359.6960-8-tiwai@suse.de
Stable-dep-of: e60dc9812211 ("ALSA: hda: conexant: Fix headset auto detect fail in the polling mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_conexant.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index e8209178d87bb..17389a3801bd1 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -294,13 +294,11 @@ static void cx_jack_unsol_event(struct hda_codec *codec, unsigned int res)
 	snd_hda_jack_unsol_event(codec, res);
 }
 
-#ifdef CONFIG_PM
 static int cx_auto_suspend(struct hda_codec *codec)
 {
 	cx_auto_shutdown(codec);
 	return 0;
 }
-#endif
 
 static const struct hda_codec_ops cx_auto_patch_ops = {
 	.build_controls = snd_hda_gen_build_controls,
@@ -308,10 +306,8 @@ static const struct hda_codec_ops cx_auto_patch_ops = {
 	.init = cx_auto_init,
 	.free = cx_auto_free,
 	.unsol_event = cx_jack_unsol_event,
-#ifdef CONFIG_PM
 	.suspend = cx_auto_suspend,
 	.check_power_status = snd_hda_gen_check_power_status,
-#endif
 };
 
 /*
-- 
2.43.0

[PATCH 6.6 060/121] ALSA: hda: conexant: Fix headset auto detect fail in the polling mode

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: songxiebing <songxiebing@kylinos.cn>

[ Upstream commit e60dc98122110594d0290845160f12916192fc6d ]

The previous fix (7aeb25908648) only handles the unsol_event reporting
during interrupts and does not include the polling mode used to set
jackroll_ms, so now we are replacing it with
snd_hda_jack_detect_enable_callback.

Fixes: 7aeb25908648 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Co-developed-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: bo liu <bo.liu@senarytech.com>
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20240726100726.50824-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_conexant.c | 54 ++++++----------------------------
 1 file changed, 9 insertions(+), 45 deletions(-)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 17389a3801bd1..4472923ba694b 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -21,12 +21,6 @@
 #include "hda_jack.h"
 #include "hda_generic.h"
 
-enum {
-	CX_HEADSET_NOPRESENT = 0,
-	CX_HEADSET_PARTPRESENT,
-	CX_HEADSET_ALLPRESENT,
-};
-
 struct conexant_spec {
 	struct hda_gen_spec gen;
 
@@ -48,7 +42,6 @@ struct conexant_spec {
 	unsigned int gpio_led;
 	unsigned int gpio_mute_led_mask;
 	unsigned int gpio_mic_led_mask;
-	unsigned int headset_present_flag;
 	bool is_cx8070_sn6140;
 };
 
@@ -250,48 +243,19 @@ static void cx_process_headset_plugin(struct hda_codec *codec)
 	}
 }
 
-static void cx_update_headset_mic_vref(struct hda_codec *codec, unsigned int res)
+static void cx_update_headset_mic_vref(struct hda_codec *codec, struct hda_jack_callback *event)
 {
-	unsigned int phone_present, mic_persent, phone_tag, mic_tag;
-	struct conexant_spec *spec = codec->spec;
+	unsigned int mic_present;
 
 	/* In cx8070 and sn6140, the node 16 can only be config to headphone or disabled,
 	 * the node 19 can only be config to microphone or disabled.
 	 * Check hp&mic tag to process headset pulgin&plugout.
 	 */
-	phone_tag = snd_hda_codec_read(codec, 0x16, 0, AC_VERB_GET_UNSOLICITED_RESPONSE, 0x0);
-	mic_tag = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_UNSOLICITED_RESPONSE, 0x0);
-	if ((phone_tag & (res >> AC_UNSOL_RES_TAG_SHIFT)) ||
-	    (mic_tag & (res >> AC_UNSOL_RES_TAG_SHIFT))) {
-		phone_present = snd_hda_codec_read(codec, 0x16, 0, AC_VERB_GET_PIN_SENSE, 0x0);
-		if (!(phone_present & AC_PINSENSE_PRESENCE)) {/* headphone plugout */
-			spec->headset_present_flag = CX_HEADSET_NOPRESENT;
-			snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20);
-			return;
-		}
-		if (spec->headset_present_flag == CX_HEADSET_NOPRESENT) {
-			spec->headset_present_flag = CX_HEADSET_PARTPRESENT;
-		} else if (spec->headset_present_flag == CX_HEADSET_PARTPRESENT) {
-			mic_persent = snd_hda_codec_read(codec, 0x19, 0,
-							 AC_VERB_GET_PIN_SENSE, 0x0);
-			/* headset is present */
-			if ((phone_present & AC_PINSENSE_PRESENCE) &&
-			    (mic_persent & AC_PINSENSE_PRESENCE)) {
-				cx_process_headset_plugin(codec);
-				spec->headset_present_flag = CX_HEADSET_ALLPRESENT;
-			}
-		}
-	}
-}
-
-static void cx_jack_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	struct conexant_spec *spec = codec->spec;
-
-	if (spec->is_cx8070_sn6140)
-		cx_update_headset_mic_vref(codec, res);
-
-	snd_hda_jack_unsol_event(codec, res);
+	mic_present = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0x0);
+	if (!(mic_present & AC_PINSENSE_PRESENCE)) /* mic plugout */
+		snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20);
+	else
+		cx_process_headset_plugin(codec);
 }
 
 static int cx_auto_suspend(struct hda_codec *codec)
@@ -305,7 +269,7 @@ static const struct hda_codec_ops cx_auto_patch_ops = {
 	.build_pcms = snd_hda_gen_build_pcms,
 	.init = cx_auto_init,
 	.free = cx_auto_free,
-	.unsol_event = cx_jack_unsol_event,
+	.unsol_event = snd_hda_jack_unsol_event,
 	.suspend = cx_auto_suspend,
 	.check_power_status = snd_hda_gen_check_power_status,
 };
@@ -1163,7 +1127,7 @@ static int patch_conexant_auto(struct hda_codec *codec)
 	case 0x14f11f86:
 	case 0x14f11f87:
 		spec->is_cx8070_sn6140 = true;
-		spec->headset_present_flag = CX_HEADSET_NOPRESENT;
+		snd_hda_jack_detect_enable_callback(codec, 0x19, cx_update_headset_mic_vref);
 		break;
 	}
 
-- 
2.43.0

[PATCH 6.6 061/121] Bluetooth: btintel: Fail setup on error

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kiran K <kiran.k@intel.com>

[ Upstream commit e22a3a9d4134d7e6351a2998771522e74bcc58da ]

Do not attempt to send any hci command to controller if *setup* function
fails.

Fixes: af395330abed ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btintel.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 3da3c266a66f3..a936219aebb81 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2845,6 +2845,9 @@ static int btintel_setup_combined(struct hci_dev *hdev)
 		btintel_set_dsm_reset_method(hdev, &ver_tlv);
 
 		err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
+		if (err)
+			goto exit_error;
+
 		btintel_register_devcoredump_support(hdev);
 		break;
 	default:
-- 
2.43.0

[PATCH 6.6 062/121] Bluetooth: hci_sync: Fix suspending with wrong filter policy

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 96b82af36efaa1787946e021aa3dc5410c05beeb ]

When suspending the scan filter policy cannot be 0x00 (no acceptlist)
since that means the host has to process every advertisement report
waking up the system, so this attempts to check if hdev is marked as
suspended and if the resulting filter policy would be 0x00 (no
acceptlist) then skip passive scanning if thre no devices in the
acceptlist otherwise reset the filter policy to 0x01 so the acceptlist
is used since the devices programmed there can still wakeup be system.

Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_sync.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index b3f5714dab342..6dab0c99c82c7 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -2862,6 +2862,27 @@ static int hci_passive_scan_sync(struct hci_dev *hdev)
 	 */
 	filter_policy = hci_update_accept_list_sync(hdev);
 
+	/* If suspended and filter_policy set to 0x00 (no acceptlist) then
+	 * passive scanning cannot be started since that would require the host
+	 * to be woken up to process the reports.
+	 */
+	if (hdev->suspended && !filter_policy) {
+		/* Check if accept list is empty then there is no need to scan
+		 * while suspended.
+		 */
+		if (list_empty(&hdev->le_accept_list))
+			return 0;
+
+		/* If there are devices is the accept_list that means some
+		 * devices could not be programmed which in non-suspended case
+		 * means filter_policy needs to be set to 0x00 so the host needs
+		 * to filter, but since this is treating suspended case we
+		 * can ignore device needing host to filter to allow devices in
+		 * the acceptlist to be able to wakeup the system.
+		 */
+		filter_policy = 0x01;
+	}
+
 	/* When the controller is using random resolvable addresses and
 	 * with that having LE privacy enabled, then controllers with
 	 * Extended Scanner Filter Policies support can now enable support
-- 
2.43.0

[PATCH 6.6 063/121] mptcp: give rcvlowat some love

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 5684ab1a0effbfeb706f47d85785f653005b97b1 ]

The MPTCP protocol allow setting sk_rcvlowat, but the value there
is currently ignored.

Additionally, the default subflows sk_rcvlowat basically disables per
subflow delayed ack: the MPTCP protocol move the incoming data from the
subflows into the msk socket as soon as the TCP stacks invokes the subflow
data_ready callback. Later, when __tcp_ack_snd_check() takes action,
the subflow-level copied_seq matches rcv_nxt, and that mandate for an
immediate ack.

Let the mptcp receive path be aware of such threshold, explicitly tracking
the amount of data available to be ready and checking vs sk_rcvlowat in
mptcp_poll() and before waking-up readers.

Additionally implement the set_rcvlowat() callback, to properly handle
the rcvbuf auto-tuning on sk_rcvlowat changes.

Finally to properly handle delayed ack, force the subflow level threshold
to 0 and instead explicitly ask for an immediate ack when the msk level th
is not reached.

Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-5-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 05f76b2d634e ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.c | 24 +++++++++++-------------
 net/mptcp/protocol.h | 20 ++++++++++++++++++++
 net/mptcp/sockopt.c  | 42 ++++++++++++++++++++++++++++++++++++++++++
 net/mptcp/subflow.c  | 12 ++++++++++--
 4 files changed, 83 insertions(+), 15 deletions(-)

diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index fbf2b26760731..d2edd02a137bd 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -849,9 +849,8 @@ void mptcp_data_ready(struct sock *sk, struct sock *ssk)
 
 	/* Wake-up the reader only for in-sequence data */
 	mptcp_data_lock(sk);
-	if (move_skbs_to_msk(msk, ssk))
+	if (move_skbs_to_msk(msk, ssk) && mptcp_epollin_ready(sk))
 		sk->sk_data_ready(sk);
-
 	mptcp_data_unlock(sk);
 }
 
@@ -1918,6 +1917,7 @@ static int __mptcp_recvmsg_mskq(struct mptcp_sock *msk,
 			if (!(flags & MSG_PEEK)) {
 				MPTCP_SKB_CB(skb)->offset += count;
 				MPTCP_SKB_CB(skb)->map_seq += count;
+				msk->bytes_consumed += count;
 			}
 			break;
 		}
@@ -1928,6 +1928,7 @@ static int __mptcp_recvmsg_mskq(struct mptcp_sock *msk,
 			WRITE_ONCE(msk->rmem_released, msk->rmem_released + skb->truesize);
 			__skb_unlink(skb, &msk->receive_queue);
 			__kfree_skb(skb);
+			msk->bytes_consumed += count;
 		}
 
 		if (copied >= len)
@@ -2752,6 +2753,7 @@ static void __mptcp_init_sock(struct sock *sk)
 	msk->rmem_fwd_alloc = 0;
 	WRITE_ONCE(msk->rmem_released, 0);
 	msk->timer_ival = TCP_RTO_MIN;
+	msk->scaling_ratio = TCP_DEFAULT_SCALING_RATIO;
 
 	WRITE_ONCE(msk->first, NULL);
 	inet_csk(sk)->icsk_sync_mss = mptcp_sync_mss;
@@ -2984,16 +2986,9 @@ void __mptcp_unaccepted_force_close(struct sock *sk)
 	__mptcp_destroy_sock(sk);
 }
 
-static __poll_t mptcp_check_readable(struct mptcp_sock *msk)
+static __poll_t mptcp_check_readable(struct sock *sk)
 {
-	/* Concurrent splices from sk_receive_queue into receive_queue will
-	 * always show at least one non-empty queue when checked in this order.
-	 */
-	if (skb_queue_empty_lockless(&((struct sock *)msk)->sk_receive_queue) &&
-	    skb_queue_empty_lockless(&msk->receive_queue))
-		return 0;
-
-	return EPOLLIN | EPOLLRDNORM;
+	return mptcp_epollin_ready(sk) ? EPOLLIN | EPOLLRDNORM : 0;
 }
 
 static void mptcp_check_listen_stop(struct sock *sk)
@@ -3031,7 +3026,7 @@ bool __mptcp_close(struct sock *sk, long timeout)
 		goto cleanup;
 	}
 
-	if (mptcp_check_readable(msk) || timeout < 0) {
+	if (mptcp_data_avail(msk) || timeout < 0) {
 		/* If the msk has read data, or the caller explicitly ask it,
 		 * do the MPTCP equivalent of TCP reset, aka MPTCP fastclose
 		 */
@@ -3157,6 +3152,7 @@ static int mptcp_disconnect(struct sock *sk, int flags)
 	msk->snd_data_fin_enable = false;
 	msk->rcv_fastclose = false;
 	msk->use_64bit_ack = false;
+	msk->bytes_consumed = 0;
 	WRITE_ONCE(msk->csum_enabled, mptcp_is_checksum_enabled(sock_net(sk)));
 	mptcp_pm_data_reset(msk);
 	mptcp_ca_reset(sk);
@@ -3983,7 +3979,7 @@ static __poll_t mptcp_poll(struct file *file, struct socket *sock,
 		mask |= EPOLLIN | EPOLLRDNORM | EPOLLRDHUP;
 
 	if (state != TCP_SYN_SENT && state != TCP_SYN_RECV) {
-		mask |= mptcp_check_readable(msk);
+		mask |= mptcp_check_readable(sk);
 		if (shutdown & SEND_SHUTDOWN)
 			mask |= EPOLLOUT | EPOLLWRNORM;
 		else
@@ -4021,6 +4017,7 @@ static const struct proto_ops mptcp_stream_ops = {
 	.sendmsg	   = inet_sendmsg,
 	.recvmsg	   = inet_recvmsg,
 	.mmap		   = sock_no_mmap,
+	.set_rcvlowat	   = mptcp_set_rcvlowat,
 };
 
 static struct inet_protosw mptcp_protosw = {
@@ -4122,6 +4119,7 @@ static const struct proto_ops mptcp_v6_stream_ops = {
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	   = inet6_compat_ioctl,
 #endif
+	.set_rcvlowat	   = mptcp_set_rcvlowat,
 };
 
 static struct proto mptcp_v6_prot;
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 93ba48f4ae386..305f4ed954b4b 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -268,6 +268,7 @@ struct mptcp_sock {
 	atomic64_t	rcv_wnd_sent;
 	u64		rcv_data_fin_seq;
 	u64		bytes_retrans;
+	u64		bytes_consumed;
 	int		rmem_fwd_alloc;
 	int		snd_burst;
 	int		old_wspace;
@@ -674,6 +675,24 @@ struct sock *mptcp_subflow_get_retrans(struct mptcp_sock *msk);
 int mptcp_sched_get_send(struct mptcp_sock *msk);
 int mptcp_sched_get_retrans(struct mptcp_sock *msk);
 
+static inline u64 mptcp_data_avail(const struct mptcp_sock *msk)
+{
+	return READ_ONCE(msk->bytes_received) - READ_ONCE(msk->bytes_consumed);
+}
+
+static inline bool mptcp_epollin_ready(const struct sock *sk)
+{
+	/* mptcp doesn't have to deal with small skbs in the receive queue,
+	 * at it can always coalesce them
+	 */
+	return (mptcp_data_avail(mptcp_sk(sk)) >= sk->sk_rcvlowat) ||
+	       (mem_cgroup_sockets_enabled && sk->sk_memcg &&
+		mem_cgroup_under_socket_pressure(sk->sk_memcg)) ||
+	       READ_ONCE(tcp_memory_pressure);
+}
+
+int mptcp_set_rcvlowat(struct sock *sk, int val);
+
 static inline bool __tcp_can_send(const struct sock *ssk)
 {
 	/* only send if our side has not closed yet */
@@ -748,6 +767,7 @@ static inline bool mptcp_is_fully_established(struct sock *sk)
 	return inet_sk_state_load(sk) == TCP_ESTABLISHED &&
 	       READ_ONCE(mptcp_sk(sk)->fully_established);
 }
+
 void mptcp_rcv_space_init(struct mptcp_sock *msk, const struct sock *ssk);
 void mptcp_data_ready(struct sock *sk, struct sock *ssk);
 bool mptcp_finish_join(struct sock *sk);
diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c
index cc04b5e29dd35..6e254f10b41e6 100644
--- a/net/mptcp/sockopt.c
+++ b/net/mptcp/sockopt.c
@@ -1521,9 +1521,51 @@ void mptcp_sockopt_sync_locked(struct mptcp_sock *msk, struct sock *ssk)
 
 	msk_owned_by_me(msk);
 
+	ssk->sk_rcvlowat = 0;
+
 	if (READ_ONCE(subflow->setsockopt_seq) != msk->setsockopt_seq) {
 		sync_socket_options(msk, ssk);
 
 		subflow->setsockopt_seq = msk->setsockopt_seq;
 	}
 }
+
+/* unfortunately this is different enough from the tcp version so
+ * that we can't factor it out
+ */
+int mptcp_set_rcvlowat(struct sock *sk, int val)
+{
+	struct mptcp_subflow_context *subflow;
+	int space, cap;
+
+	if (sk->sk_userlocks & SOCK_RCVBUF_LOCK)
+		cap = sk->sk_rcvbuf >> 1;
+	else
+		cap = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]) >> 1;
+	val = min(val, cap);
+	WRITE_ONCE(sk->sk_rcvlowat, val ? : 1);
+
+	/* Check if we need to signal EPOLLIN right now */
+	if (mptcp_epollin_ready(sk))
+		sk->sk_data_ready(sk);
+
+	if (sk->sk_userlocks & SOCK_RCVBUF_LOCK)
+		return 0;
+
+	space = __tcp_space_from_win(mptcp_sk(sk)->scaling_ratio, val);
+	if (space <= sk->sk_rcvbuf)
+		return 0;
+
+	/* propagate the rcvbuf changes to all the subflows */
+	WRITE_ONCE(sk->sk_rcvbuf, space);
+	mptcp_for_each_subflow(mptcp_sk(sk), subflow) {
+		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
+		bool slow;
+
+		slow = lock_sock_fast(ssk);
+		WRITE_ONCE(ssk->sk_rcvbuf, space);
+		tcp_sk(ssk)->window_clamp = val;
+		unlock_sock_fast(ssk, slow);
+	}
+	return 0;
+}
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 23ee96c6abcbf..090bd05a78642 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -1432,10 +1432,18 @@ static void subflow_data_ready(struct sock *sk)
 	WARN_ON_ONCE(!__mptcp_check_fallback(msk) && !subflow->mp_capable &&
 		     !subflow->mp_join && !(state & TCPF_CLOSE));
 
-	if (mptcp_subflow_data_available(sk))
+	if (mptcp_subflow_data_available(sk)) {
 		mptcp_data_ready(parent, sk);
-	else if (unlikely(sk->sk_err))
+
+		/* subflow-level lowat test are not relevant.
+		 * respect the msk-level threshold eventually mandating an immediate ack
+		 */
+		if (mptcp_data_avail(msk) < parent->sk_rcvlowat &&
+		    (tcp_sk(sk)->rcv_nxt - tcp_sk(sk)->rcv_wup) > inet_csk(sk)->icsk_ack.rcv_mss)
+			inet_csk(sk)->icsk_ack.pending |= ICSK_ACK_NOW;
+	} else if (unlikely(sk->sk_err)) {
 		subflow_error_report(sk);
+	}
 }
 
 static void subflow_write_space(struct sock *ssk)
-- 
2.43.0

[PATCH 6.6 064/121] tcp: annotate data-races around tp->window_clamp

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit f410cbea9f3d2675b4c8e52af1d1985b11b387d1 ]

tp->window_clamp can be read locklessly, add READ_ONCE()
and WRITE_ONCE() annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240404114231.2195171-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 05f76b2d634e ("tcp: Adjust clamping window for applications specifying SO_RCVBUF")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/syncookies.c |  3 ++-
 net/ipv4/tcp.c        |  8 ++++----
 net/ipv4/tcp_input.c  | 17 ++++++++++-------
 net/ipv4/tcp_output.c | 18 ++++++++++--------
 net/ipv6/syncookies.c |  2 +-
 net/mptcp/protocol.c  |  2 +-
 net/mptcp/sockopt.c   |  2 +-
 7 files changed, 29 insertions(+), 23 deletions(-)

diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 3b4dafefb4b03..e143562077958 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -424,7 +424,8 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb)
 	}
 
 	/* Try to redo what tcp_v4_send_synack did. */
-	req->rsk_window_clamp = tp->window_clamp ? :dst_metric(&rt->dst, RTAX_WINDOW);
+	req->rsk_window_clamp = READ_ONCE(tp->window_clamp) ? :
+				dst_metric(&rt->dst, RTAX_WINDOW);
 	/* limit the window selection if the user enforce a smaller rx buffer */
 	full_space = tcp_full_space(sk);
 	if (sk->sk_userlocks & SOCK_RCVBUF_LOCK &&
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 91c3d8264059d..1e3202f2b7a87 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1723,7 +1723,7 @@ int tcp_set_rcvlowat(struct sock *sk, int val)
 	space = tcp_space_from_win(sk, val);
 	if (space > sk->sk_rcvbuf) {
 		WRITE_ONCE(sk->sk_rcvbuf, space);
-		tcp_sk(sk)->window_clamp = val;
+		WRITE_ONCE(tcp_sk(sk)->window_clamp, val);
 	}
 	return 0;
 }
@@ -3386,7 +3386,7 @@ int tcp_set_window_clamp(struct sock *sk, int val)
 	if (!val) {
 		if (sk->sk_state != TCP_CLOSE)
 			return -EINVAL;
-		tp->window_clamp = 0;
+		WRITE_ONCE(tp->window_clamp, 0);
 	} else {
 		u32 new_rcv_ssthresh, old_window_clamp = tp->window_clamp;
 		u32 new_window_clamp = val < SOCK_MIN_RCVBUF / 2 ?
@@ -3395,7 +3395,7 @@ int tcp_set_window_clamp(struct sock *sk, int val)
 		if (new_window_clamp == old_window_clamp)
 			return 0;
 
-		tp->window_clamp = new_window_clamp;
+		WRITE_ONCE(tp->window_clamp, new_window_clamp);
 		if (new_window_clamp < old_window_clamp) {
 			/* need to apply the reserved mem provisioning only
 			 * when shrinking the window clamp
@@ -4020,7 +4020,7 @@ int do_tcp_getsockopt(struct sock *sk, int level,
 				      TCP_RTO_MAX / HZ);
 		break;
 	case TCP_WINDOW_CLAMP:
-		val = tp->window_clamp;
+		val = READ_ONCE(tp->window_clamp);
 		break;
 	case TCP_INFO: {
 		struct tcp_info info;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index c2e4dac42453b..13464e35d7565 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -570,19 +570,20 @@ static void tcp_init_buffer_space(struct sock *sk)
 	maxwin = tcp_full_space(sk);
 
 	if (tp->window_clamp >= maxwin) {
-		tp->window_clamp = maxwin;
+		WRITE_ONCE(tp->window_clamp, maxwin);
 
 		if (tcp_app_win && maxwin > 4 * tp->advmss)
-			tp->window_clamp = max(maxwin -
-					       (maxwin >> tcp_app_win),
-					       4 * tp->advmss);
+			WRITE_ONCE(tp->window_clamp,
+				   max(maxwin - (maxwin >> tcp_app_win),
+				       4 * tp->advmss));
 	}
 
 	/* Force reservation of one segment. */
 	if (tcp_app_win &&
 	    tp->window_clamp > 2 * tp->advmss &&
 	    tp->window_clamp + tp->advmss > maxwin)
-		tp->window_clamp = max(2 * tp->advmss, maxwin - tp->advmss);
+		WRITE_ONCE(tp->window_clamp,
+			   max(2 * tp->advmss, maxwin - tp->advmss));
 
 	tp->rcv_ssthresh = min(tp->rcv_ssthresh, tp->window_clamp);
 	tp->snd_cwnd_stamp = tcp_jiffies32;
@@ -768,7 +769,8 @@ void tcp_rcv_space_adjust(struct sock *sk)
 			WRITE_ONCE(sk->sk_rcvbuf, rcvbuf);
 
 			/* Make the window clamp follow along.  */
-			tp->window_clamp = tcp_win_from_space(sk, rcvbuf);
+			WRITE_ONCE(tp->window_clamp,
+				   tcp_win_from_space(sk, rcvbuf));
 		}
 	}
 	tp->rcvq_space.space = copied;
@@ -6347,7 +6349,8 @@ static int tcp_rcv_synsent_state_process(struct sock *sk, struct sk_buff *skb,
 
 		if (!tp->rx_opt.wscale_ok) {
 			tp->rx_opt.snd_wscale = tp->rx_opt.rcv_wscale = 0;
-			tp->window_clamp = min(tp->window_clamp, 65535U);
+			WRITE_ONCE(tp->window_clamp,
+				   min(tp->window_clamp, 65535U));
 		}
 
 		if (tp->rx_opt.saw_tstamp) {
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 5631041ae12cb..15c49d559db53 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -203,16 +203,17 @@ static inline void tcp_event_ack_sent(struct sock *sk, u32 rcv_nxt)
  * This MUST be enforced by all callers.
  */
 void tcp_select_initial_window(const struct sock *sk, int __space, __u32 mss,
-			       __u32 *rcv_wnd, __u32 *window_clamp,
+			       __u32 *rcv_wnd, __u32 *__window_clamp,
 			       int wscale_ok, __u8 *rcv_wscale,
 			       __u32 init_rcv_wnd)
 {
 	unsigned int space = (__space < 0 ? 0 : __space);
+	u32 window_clamp = READ_ONCE(*__window_clamp);
 
 	/* If no clamp set the clamp to the max possible scaled window */
-	if (*window_clamp == 0)
-		(*window_clamp) = (U16_MAX << TCP_MAX_WSCALE);
-	space = min(*window_clamp, space);
+	if (window_clamp == 0)
+		window_clamp = (U16_MAX << TCP_MAX_WSCALE);
+	space = min(window_clamp, space);
 
 	/* Quantize space offering to a multiple of mss if possible. */
 	if (space > mss)
@@ -239,12 +240,13 @@ void tcp_select_initial_window(const struct sock *sk, int __space, __u32 mss,
 		/* Set window scaling on max possible window */
 		space = max_t(u32, space, READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]));
 		space = max_t(u32, space, READ_ONCE(sysctl_rmem_max));
-		space = min_t(u32, space, *window_clamp);
+		space = min_t(u32, space, window_clamp);
 		*rcv_wscale = clamp_t(int, ilog2(space) - 15,
 				      0, TCP_MAX_WSCALE);
 	}
 	/* Set the clamp no higher than max representable value */
-	(*window_clamp) = min_t(__u32, U16_MAX << (*rcv_wscale), *window_clamp);
+	WRITE_ONCE(*__window_clamp,
+		   min_t(__u32, U16_MAX << (*rcv_wscale), window_clamp));
 }
 EXPORT_SYMBOL(tcp_select_initial_window);
 
@@ -3787,7 +3789,7 @@ static void tcp_connect_init(struct sock *sk)
 	tcp_ca_dst_init(sk, dst);
 
 	if (!tp->window_clamp)
-		tp->window_clamp = dst_metric(dst, RTAX_WINDOW);
+		WRITE_ONCE(tp->window_clamp, dst_metric(dst, RTAX_WINDOW));
 	tp->advmss = tcp_mss_clamp(tp, dst_metric_advmss(dst));
 
 	tcp_initialize_rcv_mss(sk);
@@ -3795,7 +3797,7 @@ static void tcp_connect_init(struct sock *sk)
 	/* limit the window selection if the user enforce a smaller rx buffer */
 	if (sk->sk_userlocks & SOCK_RCVBUF_LOCK &&
 	    (tp->window_clamp > tcp_full_space(sk) || tp->window_clamp == 0))
-		tp->window_clamp = tcp_full_space(sk);
+		WRITE_ONCE(tp->window_clamp, tcp_full_space(sk));
 
 	rcv_wnd = tcp_rwnd_init_bpf(sk);
 	if (rcv_wnd == 0)
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 8698b49dfc8de..593ead8a45d79 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -243,7 +243,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 			goto out_free;
 	}
 
-	req->rsk_window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW);
+	req->rsk_window_clamp = READ_ONCE(tp->window_clamp) ? :dst_metric(dst, RTAX_WINDOW);
 	/* limit the window selection if the user enforce a smaller rx buffer */
 	full_space = tcp_full_space(sk);
 	if (sk->sk_userlocks & SOCK_RCVBUF_LOCK &&
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index d2edd02a137bd..973290d08e796 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -2024,7 +2024,7 @@ static void mptcp_rcv_space_adjust(struct mptcp_sock *msk, int copied)
 				ssk = mptcp_subflow_tcp_sock(subflow);
 				slow = lock_sock_fast(ssk);
 				WRITE_ONCE(ssk->sk_rcvbuf, rcvbuf);
-				tcp_sk(ssk)->window_clamp = window_clamp;
+				WRITE_ONCE(tcp_sk(ssk)->window_clamp, window_clamp);
 				tcp_cleanup_rbuf(ssk, 1);
 				unlock_sock_fast(ssk, slow);
 			}
diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c
index 6e254f10b41e6..3977332c44c0a 100644
--- a/net/mptcp/sockopt.c
+++ b/net/mptcp/sockopt.c
@@ -1564,7 +1564,7 @@ int mptcp_set_rcvlowat(struct sock *sk, int val)
 
 		slow = lock_sock_fast(ssk);
 		WRITE_ONCE(ssk->sk_rcvbuf, space);
-		tcp_sk(ssk)->window_clamp = val;
+		WRITE_ONCE(tcp_sk(ssk)->window_clamp, val);
 		unlock_sock_fast(ssk, slow);
 	}
 	return 0;
-- 
2.43.0

[PATCH 6.6 065/121] tcp: Adjust clamping window for applications specifying SO_RCVBUF

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>

[ Upstream commit 05f76b2d634e65ab34472802d9b142ea9e03f74e ]

tp->scaling_ratio is not updated based on skb->len/skb->truesize once
SO_RCVBUF is set leading to the maximum window scaling to be 25% of
rcvbuf after
commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale")
and 50% of rcvbuf after
commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio").
50% tries to emulate the behavior of older kernels using
sysctl_tcp_adv_win_scale with default value.

Systems which were using a different values of sysctl_tcp_adv_win_scale
in older kernels ended up seeing reduced download speeds in certain
cases as covered in https://lists.openwall.net/netdev/2024/05/15/13
While the sysctl scheme is no longer acceptable, the value of 50% is
a bit conservative when the skb->len/skb->truesize ratio is later
determined to be ~0.66.

Applications not specifying SO_RCVBUF update the window scaling and
the receiver buffer every time data is copied to userspace. This
computation is now used for applications setting SO_RCVBUF to update
the maximum window scaling while ensuring that the receive buffer
is within the application specified limit.

Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_input.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 13464e35d7565..d0364cff65c9f 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -748,8 +748,7 @@ void tcp_rcv_space_adjust(struct sock *sk)
 	 * <prev RTT . ><current RTT .. ><next RTT .... >
 	 */
 
-	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf) &&
-	    !(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
+	if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf)) {
 		u64 rcvwin, grow;
 		int rcvbuf;
 
@@ -765,12 +764,22 @@ void tcp_rcv_space_adjust(struct sock *sk)
 
 		rcvbuf = min_t(u64, tcp_space_from_win(sk, rcvwin),
 			       READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_rmem[2]));
-		if (rcvbuf > sk->sk_rcvbuf) {
-			WRITE_ONCE(sk->sk_rcvbuf, rcvbuf);
+		if (!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
+			if (rcvbuf > sk->sk_rcvbuf) {
+				WRITE_ONCE(sk->sk_rcvbuf, rcvbuf);
 
-			/* Make the window clamp follow along.  */
-			WRITE_ONCE(tp->window_clamp,
-				   tcp_win_from_space(sk, rcvbuf));
+				/* Make the window clamp follow along.  */
+				WRITE_ONCE(tp->window_clamp,
+					   tcp_win_from_space(sk, rcvbuf));
+			}
+		} else {
+			/* Make the window clamp follow along while being bounded
+			 * by SO_RCVBUF.
+			 */
+			int clamp = tcp_win_from_space(sk, min(rcvbuf, sk->sk_rcvbuf));
+
+			if (clamp > tp->window_clamp)
+				WRITE_ONCE(tp->window_clamp, clamp);
 		}
 	}
 	tp->rcvq_space.space = copied;
-- 
2.43.0

[PATCH 6.6 066/121] net: axienet: start napi before enabling Rx/Tx

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Chiu <andy.chiu@sifive.com>

[ Upstream commit 799a829507506924add8a7620493adc1c3cfda30 ]

softirq may get lost if an Rx interrupt comes before we call
napi_enable. Move napi_enable in front of axienet_setoptions(), which
turns on the device, to address the issue.

Link: https://lists.gnu.org/archive/html/qemu-devel/2024-07/msg06160.html
Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 3297aff969c80..11e08cb8d3c3e 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1826,9 +1826,9 @@ static void axienet_dma_err_handler(struct work_struct *work)
 			   ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
 	axienet_set_mac_address(ndev, NULL);
 	axienet_set_multicast_list(ndev);
-	axienet_setoptions(ndev, lp->options);
 	napi_enable(&lp->napi_rx);
 	napi_enable(&lp->napi_tx);
+	axienet_setoptions(ndev, lp->options);
 }
 
 /**
-- 
2.43.0

[PATCH 6.6 067/121] rtnetlink: Dont ignore IFLA_TARGET_NETNSID when ifname is specified in rtnl_dellink().

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 9415d375d8520e0ed55f0c0b058928da9a5b5b3d ]

The cited commit accidentally replaced tgt_net with net in rtnl_dellink().

As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified
with IFLA_IFNAME or IFLA_ALT_IFNAME.

Let's pass tgt_net to rtnl_dev_get().

Fixes: cc6090e985d7 ("net: rtnetlink: introduce helper to get net_device instance by ifname")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 7ea66de1442cc..8573dad6d8171 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3263,7 +3263,7 @@ static int rtnl_dellink(struct sk_buff *skb, struct nlmsghdr *nlh,
 	if (ifm->ifi_index > 0)
 		dev = __dev_get_by_index(tgt_net, ifm->ifi_index);
 	else if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME])
-		dev = rtnl_dev_get(net, tb);
+		dev = rtnl_dev_get(tgt_net, tb);
 	else if (tb[IFLA_GROUP])
 		err = rtnl_group_dellink(tgt_net, nla_get_u32(tb[IFLA_GROUP]));
 	else
-- 
2.43.0

[PATCH 6.6 068/121] i915/perf: Remove code to update PWR_CLK_STATE for gen12

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>

[ Upstream commit 4bc14b9cfaa2149d41baef2f2620e9f82d9847d7 ]

PWR_CLK_STATE only needs to be modified up until gen11. For gen12 this
code is not applicable. Remove code to update context image with
PWR_CLK_STATE for gen12.

Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240629005643.3050678-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7b5bdae7740eb6a3d09f9cd4e4b07362a15b86b3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/i915_perf.c | 33 --------------------------------
 1 file changed, 33 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 3f90403d86cb4..0808b54d3c518 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -2781,26 +2781,6 @@ oa_configure_all_contexts(struct i915_perf_stream *stream,
 	return 0;
 }
 
-static int
-gen12_configure_all_contexts(struct i915_perf_stream *stream,
-			     const struct i915_oa_config *oa_config,
-			     struct i915_active *active)
-{
-	struct flex regs[] = {
-		{
-			GEN8_R_PWR_CLK_STATE(RENDER_RING_BASE),
-			CTX_R_PWR_CLK_STATE,
-		},
-	};
-
-	if (stream->engine->class != RENDER_CLASS)
-		return 0;
-
-	return oa_configure_all_contexts(stream,
-					 regs, ARRAY_SIZE(regs),
-					 active);
-}
-
 static int
 lrc_configure_all_contexts(struct i915_perf_stream *stream,
 			   const struct i915_oa_config *oa_config,
@@ -2907,7 +2887,6 @@ gen12_enable_metric_set(struct i915_perf_stream *stream,
 {
 	struct drm_i915_private *i915 = stream->perf->i915;
 	struct intel_uncore *uncore = stream->uncore;
-	struct i915_oa_config *oa_config = stream->oa_config;
 	bool periodic = stream->periodic;
 	u32 period_exponent = stream->period_exponent;
 	u32 sqcnt1;
@@ -2951,15 +2930,6 @@ gen12_enable_metric_set(struct i915_perf_stream *stream,
 
 	intel_uncore_rmw(uncore, GEN12_SQCNT1, 0, sqcnt1);
 
-	/*
-	 * Update all contexts prior writing the mux configurations as we need
-	 * to make sure all slices/subslices are ON before writing to NOA
-	 * registers.
-	 */
-	ret = gen12_configure_all_contexts(stream, oa_config, active);
-	if (ret)
-		return ret;
-
 	/*
 	 * For Gen12, performance counters are context
 	 * saved/restored. Only enable it for the context that
@@ -3014,9 +2984,6 @@ static void gen12_disable_metric_set(struct i915_perf_stream *stream)
 				   _MASKED_BIT_DISABLE(GEN12_DISABLE_DOP_GATING));
 	}
 
-	/* Reset all contexts' slices/subslices configurations. */
-	gen12_configure_all_contexts(stream, NULL, NULL);
-
 	/* disable the context save/restore or OAR counters */
 	if (stream->ctx)
 		gen12_configure_oar_context(stream, NULL);
-- 
2.43.0

[PATCH 6.6 069/121] ice: respect netif readiness in AF_XDP ZC related ndos

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Kubiak <michal.kubiak@intel.com>

[ Upstream commit ec145a18687fec8dd97eeb4f30057fa4debef577 ]

Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.

Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.

Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.

Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_xsk.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c
index f53566cb6bfbd..248cb02958acd 100644
--- a/drivers/net/ethernet/intel/ice/ice_xsk.c
+++ b/drivers/net/ethernet/intel/ice/ice_xsk.c
@@ -1068,6 +1068,10 @@ bool ice_xmit_zc(struct ice_tx_ring *xdp_ring)
 
 	ice_clean_xdp_irq_zc(xdp_ring);
 
+	if (!netif_carrier_ok(xdp_ring->vsi->netdev) ||
+	    !netif_running(xdp_ring->vsi->netdev))
+		return true;
+
 	budget = ICE_DESC_UNUSED(xdp_ring);
 	budget = min_t(u16, budget, ICE_RING_QUARTER(xdp_ring));
 
@@ -1111,7 +1115,7 @@ ice_xsk_wakeup(struct net_device *netdev, u32 queue_id,
 	struct ice_vsi *vsi = np->vsi;
 	struct ice_tx_ring *ring;
 
-	if (test_bit(ICE_VSI_DOWN, vsi->state))
+	if (test_bit(ICE_VSI_DOWN, vsi->state) || !netif_carrier_ok(netdev))
 		return -ENETDOWN;
 
 	if (!ice_is_xdp_ena_vsi(vsi))
-- 
2.43.0

[PATCH 6.6 070/121] ice: dont busy wait for Rx queue disable in ice_qp_dis()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

[ Upstream commit 1ff72a2f67791cd4ddad19ed830445f57b30e992 ]

When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b033f ("ice: Add support to
enable/disable all Rx queues before waiting").

To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_xsk.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c
index 248cb02958acd..a8d0cd3d831a0 100644
--- a/drivers/net/ethernet/intel/ice/ice_xsk.c
+++ b/drivers/net/ethernet/intel/ice/ice_xsk.c
@@ -199,10 +199,8 @@ static int ice_qp_dis(struct ice_vsi *vsi, u16 q_idx)
 		if (err)
 			return err;
 	}
-	err = ice_vsi_ctrl_one_rx_ring(vsi, false, q_idx, true);
-	if (err)
-		return err;
 
+	ice_vsi_ctrl_one_rx_ring(vsi, false, q_idx, false);
 	ice_qp_clean_rings(vsi, q_idx);
 	ice_qp_reset_stats(vsi, q_idx);
 
-- 
2.43.0

[PATCH 6.6 071/121] ice: replace synchronize_rcu with synchronize_net

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

[ Upstream commit 405d9999aa0b4ae467ef391d1d9c7e0d30ad0841 ]

Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.

Additionally, turn off regular Tx queue before disabling irqs and NAPI.

Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_xsk.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c
index a8d0cd3d831a0..67511153081ae 100644
--- a/drivers/net/ethernet/intel/ice/ice_xsk.c
+++ b/drivers/net/ethernet/intel/ice/ice_xsk.c
@@ -52,10 +52,8 @@ static void ice_qp_reset_stats(struct ice_vsi *vsi, u16 q_idx)
 static void ice_qp_clean_rings(struct ice_vsi *vsi, u16 q_idx)
 {
 	ice_clean_tx_ring(vsi->tx_rings[q_idx]);
-	if (ice_is_xdp_ena_vsi(vsi)) {
-		synchronize_rcu();
+	if (ice_is_xdp_ena_vsi(vsi))
 		ice_clean_tx_ring(vsi->xdp_rings[q_idx]);
-	}
 	ice_clean_rx_ring(vsi->rx_rings[q_idx]);
 }
 
@@ -180,11 +178,12 @@ static int ice_qp_dis(struct ice_vsi *vsi, u16 q_idx)
 		usleep_range(1000, 2000);
 	}
 
+	synchronize_net();
+	netif_tx_stop_queue(netdev_get_tx_queue(vsi->netdev, q_idx));
+
 	ice_qvec_dis_irq(vsi, rx_ring, q_vector);
 	ice_qvec_toggle_napi(vsi, q_vector, false);
 
-	netif_tx_stop_queue(netdev_get_tx_queue(vsi->netdev, q_idx));
-
 	ice_fill_txq_meta(vsi, tx_ring, &txq_meta);
 	err = ice_vsi_stop_tx_ring(vsi, ICE_NO_RESET, 0, tx_ring, &txq_meta);
 	if (err)
-- 
2.43.0

[PATCH 6.6 072/121] ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

[ Upstream commit 6044ca26210ba72b3dcc649fae1cbedd9e6ab018 ]

It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.

Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index 24c914015973e..49b1fa9651161 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -456,7 +456,7 @@ void ice_free_rx_ring(struct ice_rx_ring *rx_ring)
 	if (rx_ring->vsi->type == ICE_VSI_PF)
 		if (xdp_rxq_info_is_reg(&rx_ring->xdp_rxq))
 			xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
-	rx_ring->xdp_prog = NULL;
+	WRITE_ONCE(rx_ring->xdp_prog, NULL);
 	if (rx_ring->xsk_pool) {
 		kfree(rx_ring->xdp_buf);
 		rx_ring->xdp_buf = NULL;
-- 
2.43.0

[PATCH 6.6 073/121] net/iucv: fix use after free in iucv_sock_close()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandra Winter <wintera@linux.ibm.com>

[ Upstream commit f558120cd709682b739207b48cf7479fd9568431 ]

iucv_sever_path() is called from process context and from bh context.
iucv->path is used as indicator whether somebody else is taking care of
severing the path (or it is already removed / never existed).
This needs to be done with atomic compare and swap, otherwise there is a
small window where iucv_sock_close() will try to work with a path that has
already been severed and freed by iucv_callback_connrej() called by
iucv_tasklet_fn().

Example:
[452744.123844] Call Trace:
[452744.123845] ([<0000001e87f03880>] 0x1e87f03880)
[452744.123966]  [<00000000d593001e>] iucv_path_sever+0x96/0x138
[452744.124330]  [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv]
[452744.124336]  [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv]
[452744.124341]  [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv]
[452744.124345]  [<00000000d574794e>] __sock_release+0x5e/0xe8
[452744.124815]  [<00000000d5747a0c>] sock_close+0x34/0x48
[452744.124820]  [<00000000d5421642>] __fput+0xba/0x268
[452744.124826]  [<00000000d51b382c>] task_work_run+0xbc/0xf0
[452744.124832]  [<00000000d5145710>] do_notify_resume+0x88/0x90
[452744.124841]  [<00000000d5978096>] system_call+0xe2/0x2c8
[452744.125319] Last Breaking-Event-Address:
[452744.125321]  [<00000000d5930018>] iucv_path_sever+0x90/0x138
[452744.125324]
[452744.125325] Kernel panic - not syncing: Fatal exception in interrupt

Note that bh_lock_sock() is not serializing the tasklet context against
process context, because the check for sock_owned_by_user() and
corresponding handling is missing.

Ideas for a future clean-up patch:
A) Correct usage of bh_lock_sock() in tasklet context, as described in
Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/
Re-enqueue, if needed. This may require adding return values to the
tasklet functions and thus changes to all users of iucv.

B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely")
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/iucv/af_iucv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 498a0c35b7bb2..815b1df0b2d19 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -335,8 +335,8 @@ static void iucv_sever_path(struct sock *sk, int with_user_data)
 	struct iucv_sock *iucv = iucv_sk(sk);
 	struct iucv_path *path = iucv->path;
 
-	if (iucv->path) {
-		iucv->path = NULL;
+	/* Whoever resets the path pointer, must sever and free it. */
+	if (xchg(&iucv->path, NULL)) {
 		if (with_user_data) {
 			low_nmcpy(user_data, iucv->src_name);
 			high_nmcpy(user_data, iucv->dst_name);
-- 
2.43.0

[PATCH 6.6 074/121] drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macro

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suraj Kandpal <suraj.kandpal@intel.com>

[ Upstream commit 555069117390a5d581863bc797fb546bb4417c31 ]

Fix HDCP2_STREAM_STATUS macro, it called pipe instead of port never
threw a compile error as no one used it.

--v2
-Add Fixes [Jani]

Fixes: d631b984cc90 ("drm/i915/hdcp: Add HDCP 2.2 stream register")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730035505.3759899-1-suraj.kandpal@intel.com
(cherry picked from commit 73d7cd542bbd0a7c6881ea0df5255f190a1e7236)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/display/intel_hdcp_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdcp_regs.h b/drivers/gpu/drm/i915/display/intel_hdcp_regs.h
index 8023c85c7fa0e..74059384892af 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_hdcp_regs.h
@@ -249,7 +249,7 @@
 #define HDCP2_STREAM_STATUS(dev_priv, trans, port) \
 					(GRAPHICS_VER(dev_priv) >= 12 ? \
 					 TRANS_HDCP2_STREAM_STATUS(trans) : \
-					 PIPE_HDCP2_STREAM_STATUS(pipe))
+					 PIPE_HDCP2_STREAM_STATUS(port))
 
 #define _PORTA_HDCP2_AUTH_STREAM		0x66F00
 #define _PORTB_HDCP2_AUTH_STREAM		0x66F04
-- 
2.43.0

[PATCH 6.6 075/121] net: mvpp2: Dont re-use loop iterator

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 0aa3ca956c46d849775eae1816cef8fe4bc8b50e ]

This function has a nested loop.  The problem is that both the inside
and outside loop use the same variable as an iterator.  I found this
via static analysis so I'm not sure the impact.  It could be that it
loops forever or, more likely, the loop exits early.

Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/eaa8f403-7779-4d81-973d-a9ecddc0bf6f@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 05f4aa11b95c3..34051c9abd97d 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -953,13 +953,13 @@ static void mvpp2_bm_pool_update_fc(struct mvpp2_port *port,
 static void mvpp2_bm_pool_update_priv_fc(struct mvpp2 *priv, bool en)
 {
 	struct mvpp2_port *port;
-	int i;
+	int i, j;
 
 	for (i = 0; i < priv->port_count; i++) {
 		port = priv->port_list[i];
 		if (port->priv->percpu_pools) {
-			for (i = 0; i < port->nrxqs; i++)
-				mvpp2_bm_pool_update_fc(port, &port->priv->bm_pools[i],
+			for (j = 0; j < port->nrxqs; j++)
+				mvpp2_bm_pool_update_fc(port, &port->priv->bm_pools[j],
 							port->tx_fc & en);
 		} else {
 			mvpp2_bm_pool_update_fc(port, port->pool_long, port->tx_fc & en);
-- 
2.43.0

[PATCH 6.6 076/121] net: phy: micrel: Fix the KSZ9131 MDI-X status issue

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>

[ Upstream commit 84383b5ef4cd21b4a67de92afdc05a03b5247db9 ]

The MDIX status is not accurately reflecting the current state after the link
partner has manually altered its MDIX configuration while operating in forced
mode.

Access information about Auto mdix completion and pair selection from the
KSZ9131's Auto/MDI/MDI-X status register

Fixes: b64e6a8794d9 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/micrel.c | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 029c82f88ee38..9a0432145645f 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1293,6 +1293,8 @@ static int ksz9131_config_init(struct phy_device *phydev)
 	const struct device *dev_walker;
 	int ret;
 
+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
 	dev_walker = &phydev->mdio.dev;
 	do {
 		of_node = dev_walker->of_node;
@@ -1342,28 +1344,30 @@ static int ksz9131_config_init(struct phy_device *phydev)
 #define MII_KSZ9131_AUTO_MDIX		0x1C
 #define MII_KSZ9131_AUTO_MDI_SET	BIT(7)
 #define MII_KSZ9131_AUTO_MDIX_SWAP_OFF	BIT(6)
+#define MII_KSZ9131_DIG_AXAN_STS	0x14
+#define MII_KSZ9131_DIG_AXAN_STS_LINK_DET	BIT(14)
+#define MII_KSZ9131_DIG_AXAN_STS_A_SELECT	BIT(12)
 
 static int ksz9131_mdix_update(struct phy_device *phydev)
 {
 	int ret;
 
-	ret = phy_read(phydev, MII_KSZ9131_AUTO_MDIX);
-	if (ret < 0)
-		return ret;
-
-	if (ret & MII_KSZ9131_AUTO_MDIX_SWAP_OFF) {
-		if (ret & MII_KSZ9131_AUTO_MDI_SET)
-			phydev->mdix_ctrl = ETH_TP_MDI;
-		else
-			phydev->mdix_ctrl = ETH_TP_MDI_X;
+	if (phydev->mdix_ctrl != ETH_TP_MDI_AUTO) {
+		phydev->mdix = phydev->mdix_ctrl;
 	} else {
-		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-	}
+		ret = phy_read(phydev, MII_KSZ9131_DIG_AXAN_STS);
+		if (ret < 0)
+			return ret;
 
-	if (ret & MII_KSZ9131_AUTO_MDI_SET)
-		phydev->mdix = ETH_TP_MDI;
-	else
-		phydev->mdix = ETH_TP_MDI_X;
+		if (ret & MII_KSZ9131_DIG_AXAN_STS_LINK_DET) {
+			if (ret & MII_KSZ9131_DIG_AXAN_STS_A_SELECT)
+				phydev->mdix = ETH_TP_MDI;
+			else
+				phydev->mdix = ETH_TP_MDI_X;
+		} else {
+			phydev->mdix = ETH_TP_MDI_INVALID;
+		}
+	}
 
 	return 0;
 }
-- 
2.43.0

[PATCH 6.6 077/121] ALSA: hda: Conditionally use snooping for AMD HDMI

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 478689b5990deb626a0b3f1ebf165979914d6be4 ]

The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises.  The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers.  Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past.  So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.

This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.

Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240731170521.31714-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_controller.h |  2 +-
 sound/pci/hda/hda_intel.c      | 10 +++++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index 8556031bcd68e..f31cb31d46362 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -28,7 +28,7 @@
 #else
 #define AZX_DCAPS_I915_COMPONENT 0		/* NOP */
 #endif
-/* 14 unused */
+#define AZX_DCAPS_AMD_ALLOC_FIX	(1 << 14)	/* AMD allocation workaround */
 #define AZX_DCAPS_CTX_WORKAROUND (1 << 15)	/* X-Fi workaround */
 #define AZX_DCAPS_POSFIX_LPIB	(1 << 16)	/* Use LPIB as default */
 #define AZX_DCAPS_AMD_WORKAROUND (1 << 17)	/* AMD-specific workaround */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a6a9d353fe635..d5c9f113e477a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -40,6 +40,7 @@
 
 #ifdef CONFIG_X86
 /* for snoop control */
+#include <linux/dma-map-ops.h>
 #include <asm/set_memory.h>
 #include <asm/cpufeature.h>
 #endif
@@ -301,7 +302,7 @@ enum {
 
 /* quirks for ATI HDMI with snoop off */
 #define AZX_DCAPS_PRESET_ATI_HDMI_NS \
-	(AZX_DCAPS_PRESET_ATI_HDMI | AZX_DCAPS_SNOOP_OFF)
+	(AZX_DCAPS_PRESET_ATI_HDMI | AZX_DCAPS_AMD_ALLOC_FIX)
 
 /* quirks for AMD SB */
 #define AZX_DCAPS_PRESET_AMD_SB \
@@ -1715,6 +1716,13 @@ static void azx_check_snoop_available(struct azx *chip)
 	if (chip->driver_caps & AZX_DCAPS_SNOOP_OFF)
 		snoop = false;
 
+#ifdef CONFIG_X86
+	/* check the presence of DMA ops (i.e. IOMMU), disable snoop conditionally */
+	if ((chip->driver_caps & AZX_DCAPS_AMD_ALLOC_FIX) &&
+	    !get_dma_ops(chip->card->dev))
+		snoop = false;
+#endif
+
 	chip->snoop = snoop;
 	if (!snoop) {
 		dev_info(chip->card->dev, "Force to non-snoop mode\n");
-- 
2.43.0

[PATCH 6.6 078/121] netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit 5830aa863981d43560748aa93589c0695191d95d ]

We had a report that iptables-restore sometimes triggered null-ptr-deref
at boot time. [0]

The problem is that iptable_nat_table_init() is exposed to user space
before the kernel fully initialises netns.

In the small race window, a user could call iptable_nat_table_init()
that accesses net_generic(net, iptable_nat_net_id), which is available
only after registering iptable_nat_net_ops.

Let's call register_pernet_subsys() before xt_register_template().

[0]:
bpfilter: Loaded bpfilter_umh pid 11702
Started bpfilter
BUG: kernel NULL pointer dereference, address: 0000000000000013
 PF: supervisor write access in kernel mode
 PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
PREEMPT SMP NOPTI
CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1
Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat
Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c
RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246
RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80
RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0
RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240
R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000
R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004
FS:  00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
 ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
 ? xt_find_table_lock (net/netfilter/x_tables.c:1259)
 ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
 ? page_fault_oops (arch/x86/mm/fault.c:727)
 ? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518)
 ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570)
 ? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat
 xt_find_table_lock (net/netfilter/x_tables.c:1259)
 xt_request_find_table_lock (net/netfilter/x_tables.c:1287)
 get_info (net/ipv4/netfilter/ip_tables.c:965)
 ? security_capable (security/security.c:809 (discriminator 13))
 ? ns_capable (kernel/capability.c:376 kernel/capability.c:397)
 ? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656)
 ? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter
 nf_getsockopt (net/netfilter/nf_sockopt.c:116)
 ip_getsockopt (net/ipv4/ip_sockglue.c:1827)
 __sys_getsockopt (net/socket.c:2327)
 __x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339)
 do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
RIP: 0033:0x7f62844685ee
Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09
RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee
RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0
R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2
R13: 00007f628455baa0 R14: 00007ffd1f83d7b0 R15: 00007f628457a008
 </TASK>
Modules linked in: iptable_nat(+) bpfilter rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache veth xt_state xt_connmark xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 vfat fat ghash_clmulni_intel aesni_intel ena crypto_simd ptp cryptd i8042 pps_core serio button sunrpc sch_fq_codel configfs loop dm_mod fuse dax dmi_sysfs crc32_pclmul crc32c_intel efivarfs
CR2: 0000000000000013

Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Reported-by: Takahiro Kawahara <takawaha@amazon.co.jp>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/netfilter/iptable_nat.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/net/ipv4/netfilter/iptable_nat.c b/net/ipv4/netfilter/iptable_nat.c
index 56f6ecc43451e..12ca666d6e2c1 100644
--- a/net/ipv4/netfilter/iptable_nat.c
+++ b/net/ipv4/netfilter/iptable_nat.c
@@ -145,25 +145,27 @@ static struct pernet_operations iptable_nat_net_ops = {
 
 static int __init iptable_nat_init(void)
 {
-	int ret = xt_register_template(&nf_nat_ipv4_table,
-				       iptable_nat_table_init);
+	int ret;
 
+	/* net->gen->ptr[iptable_nat_net_id] must be allocated
+	 * before calling iptable_nat_table_init().
+	 */
+	ret = register_pernet_subsys(&iptable_nat_net_ops);
 	if (ret < 0)
 		return ret;
 
-	ret = register_pernet_subsys(&iptable_nat_net_ops);
-	if (ret < 0) {
-		xt_unregister_template(&nf_nat_ipv4_table);
-		return ret;
-	}
+	ret = xt_register_template(&nf_nat_ipv4_table,
+				   iptable_nat_table_init);
+	if (ret < 0)
+		unregister_pernet_subsys(&iptable_nat_net_ops);
 
 	return ret;
 }
 
 static void __exit iptable_nat_exit(void)
 {
-	unregister_pernet_subsys(&iptable_nat_net_ops);
 	xt_unregister_template(&nf_nat_ipv4_table);
+	unregister_pernet_subsys(&iptable_nat_net_ops);
 }
 
 module_init(iptable_nat_init);
-- 
2.43.0

[PATCH 6.6 079/121] netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit c22921df777de5606f1047b1345b8d22ef1c0b34 ]

ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().

Let's call register_pernet_subsys() before xt_register_template().

Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/netfilter/ip6table_nat.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/ipv6/netfilter/ip6table_nat.c b/net/ipv6/netfilter/ip6table_nat.c
index bf3cb3a13600c..52d597b16b658 100644
--- a/net/ipv6/netfilter/ip6table_nat.c
+++ b/net/ipv6/netfilter/ip6table_nat.c
@@ -147,23 +147,27 @@ static struct pernet_operations ip6table_nat_net_ops = {
 
 static int __init ip6table_nat_init(void)
 {
-	int ret = xt_register_template(&nf_nat_ipv6_table,
-				       ip6table_nat_table_init);
+	int ret;
 
+	/* net->gen->ptr[ip6table_nat_net_id] must be allocated
+	 * before calling ip6t_nat_register_lookups().
+	 */
+	ret = register_pernet_subsys(&ip6table_nat_net_ops);
 	if (ret < 0)
 		return ret;
 
-	ret = register_pernet_subsys(&ip6table_nat_net_ops);
+	ret = xt_register_template(&nf_nat_ipv6_table,
+				   ip6table_nat_table_init);
 	if (ret)
-		xt_unregister_template(&nf_nat_ipv6_table);
+		unregister_pernet_subsys(&ip6table_nat_net_ops);
 
 	return ret;
 }
 
 static void __exit ip6table_nat_exit(void)
 {
-	unregister_pernet_subsys(&ip6table_nat_net_ops);
 	xt_unregister_template(&nf_nat_ipv6_table);
+	unregister_pernet_subsys(&ip6table_nat_net_ops);
 }
 
 module_init(ip6table_nat_init);
-- 
2.43.0

[PATCH 6.6 080/121] net/mlx5: Always drain health in shutdown callback

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit 1b75da22ed1e6171e261bc9265370162553d5393 ]

There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.

Hence, drain health WQ on shutdown callback.

Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Fixes: d2aa060d40fa ("net/mlx5: Cancel health poll before sending panic teardown command")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c          | 2 +-
 drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 2237b3d01e0e5..11f11248feb8b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -2130,7 +2130,6 @@ static int mlx5_try_fast_unload(struct mlx5_core_dev *dev)
 	/* Panic tear down fw command will stop the PCI bus communication
 	 * with the HCA, so the health poll is no longer needed.
 	 */
-	mlx5_drain_health_wq(dev);
 	mlx5_stop_health_poll(dev, false);
 
 	ret = mlx5_cmd_fast_teardown_hca(dev);
@@ -2165,6 +2164,7 @@ static void shutdown(struct pci_dev *pdev)
 
 	mlx5_core_info(dev, "Shutdown was called\n");
 	set_bit(MLX5_BREAK_FW_WAIT, &dev->intf_state);
+	mlx5_drain_health_wq(dev);
 	err = mlx5_try_fast_unload(dev);
 	if (err)
 		mlx5_unload_one(dev, false);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c
index 30218f37d5285..2028acbe85ca2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c
@@ -90,6 +90,7 @@ static void mlx5_sf_dev_shutdown(struct auxiliary_device *adev)
 	struct mlx5_core_dev *mdev = sf_dev->mdev;
 
 	set_bit(MLX5_BREAK_FW_WAIT, &mdev->intf_state);
+	mlx5_drain_health_wq(mdev);
 	mlx5_unload_one(mdev, false);
 }
 
-- 
2.43.0

[PATCH 6.6 081/121] net/mlx5: Fix error handling in irq_pool_request_irq

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit a4557b0b57c40871ff00da4f623cf79211e052f3 ]

In case mlx5_irq_alloc fails, the previously allocated index remains
in the XArray, which could lead to inconsistencies.

Fix it by adding error handling that erases the allocated index
from the XArray if mlx5_irq_alloc returns an error.

Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c b/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c
index 612e666ec2635..e2230c8f18152 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/irq_affinity.c
@@ -48,6 +48,7 @@ static struct mlx5_irq *
 irq_pool_request_irq(struct mlx5_irq_pool *pool, struct irq_affinity_desc *af_desc)
 {
 	struct irq_affinity_desc auto_desc = {};
+	struct mlx5_irq *irq;
 	u32 irq_index;
 	int err;
 
@@ -64,9 +65,12 @@ irq_pool_request_irq(struct mlx5_irq_pool *pool, struct irq_affinity_desc *af_de
 		else
 			cpu_get(pool, cpumask_first(&af_desc->mask));
 	}
-	return mlx5_irq_alloc(pool, irq_index,
-			      cpumask_empty(&auto_desc.mask) ? af_desc : &auto_desc,
-			      NULL);
+	irq = mlx5_irq_alloc(pool, irq_index,
+			     cpumask_empty(&auto_desc.mask) ? af_desc : &auto_desc,
+			     NULL);
+	if (IS_ERR(irq))
+		xa_erase(&pool->irqs, irq_index);
+	return irq;
 }
 
 /* Looking for the IRQ with the smallest refcount that fits req_mask.
-- 
2.43.0

[PATCH 6.6 082/121] net/mlx5: Lag, dont use the hardcoded value of the first port

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Bloch <mbloch@nvidia.com>

[ Upstream commit 3fda84dc090390573cfbd0b1d70372663315de21 ]

The cited commit didn't change the body of the loop as it should.
It shouldn't be using MLX5_LAG_P1.

Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index dfc2ba6f780a2..18cf756bad8cc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -1512,7 +1512,7 @@ u8 mlx5_lag_get_slave_port(struct mlx5_core_dev *dev,
 		goto unlock;
 
 	for (i = 0; i < ldev->ports; i++) {
-		if (ldev->pf[MLX5_LAG_P1].netdev == slave) {
+		if (ldev->pf[i].netdev == slave) {
 			port = i;
 			break;
 		}
-- 
2.43.0

[PATCH 6.6 083/121] net/mlx5: Fix missing lock on sync reset reload

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moshe Shemesh <moshe@nvidia.com>

[ Upstream commit 572f9caa9e7295f8c8822e4122c7ae8f1c412ff9 ]

On sync reset reload work, when remote host updates devlink on reload
actions performed on that host, it misses taking devlink lock before
calling devlink_remote_reload_actions_performed() which results in
triggering lock assert like the following:

WARNING: CPU: 4 PID: 1164 at net/devlink/core.c:261 devl_assert_locked+0x3e/0x50
…
 CPU: 4 PID: 1164 Comm: kworker/u96:6 Tainted: G S      W          6.10.0-rc2+ #116
 Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0 12/18/2015
 Workqueue: mlx5_fw_reset_events mlx5_sync_reset_reload_work [mlx5_core]
 RIP: 0010:devl_assert_locked+0x3e/0x50
…
 Call Trace:
  <TASK>
  ? __warn+0xa4/0x210
  ? devl_assert_locked+0x3e/0x50
  ? report_bug+0x160/0x280
  ? handle_bug+0x3f/0x80
  ? exc_invalid_op+0x17/0x40
  ? asm_exc_invalid_op+0x1a/0x20
  ? devl_assert_locked+0x3e/0x50
  devlink_notify+0x88/0x2b0
  ? mlx5_attach_device+0x20c/0x230 [mlx5_core]
  ? __pfx_devlink_notify+0x10/0x10
  ? process_one_work+0x4b6/0xbb0
  process_one_work+0x4b6/0xbb0
[…]

Fixes: 84a433a40d0e ("net/mlx5: Lock mlx5 devlink reload callbacks")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 3a9cdf79403ae..6b17346aa4cef 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -206,6 +206,7 @@ int mlx5_fw_reset_set_live_patch(struct mlx5_core_dev *dev)
 static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev, bool unloaded)
 {
 	struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+	struct devlink *devlink = priv_to_devlink(dev);
 
 	/* if this is the driver that initiated the fw reset, devlink completed the reload */
 	if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
@@ -217,9 +218,11 @@ static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev, bool unload
 			mlx5_core_err(dev, "reset reload flow aborted, PCI reads still not working\n");
 		else
 			mlx5_load_one(dev, true);
-		devlink_remote_reload_actions_performed(priv_to_devlink(dev), 0,
+		devl_lock(devlink);
+		devlink_remote_reload_actions_performed(devlink, 0,
 							BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
 							BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
+		devl_unlock(devlink);
 	}
 }
 
-- 
2.43.0

[PATCH 6.6 084/121] net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rahul Rameshbabu <rrameshbabu@nvidia.com>

[ Upstream commit 06827e27fdcd197557be72b2229dbd362303794f ]

Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.

Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c   | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c
index ce29e31721208..de83567aae791 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c
@@ -50,9 +50,10 @@ u32 mlx5_ipsec_device_caps(struct mlx5_core_dev *mdev)
 		    MLX5_CAP_FLOWTABLE_NIC_RX(mdev, decap))
 			caps |= MLX5_IPSEC_CAP_PACKET_OFFLOAD;
 
-		if ((MLX5_CAP_FLOWTABLE_NIC_TX(mdev, ignore_flow_level) &&
-		     MLX5_CAP_FLOWTABLE_NIC_RX(mdev, ignore_flow_level)) ||
-		    MLX5_CAP_ESW_FLOWTABLE_FDB(mdev, ignore_flow_level))
+		if (IS_ENABLED(CONFIG_MLX5_CLS_ACT) &&
+		    ((MLX5_CAP_FLOWTABLE_NIC_TX(mdev, ignore_flow_level) &&
+		      MLX5_CAP_FLOWTABLE_NIC_RX(mdev, ignore_flow_level)) ||
+		     MLX5_CAP_ESW_FLOWTABLE_FDB(mdev, ignore_flow_level)))
 			caps |= MLX5_IPSEC_CAP_PRIO;
 
 		if (MLX5_CAP_FLOWTABLE_NIC_TX(mdev,
-- 
2.43.0

[PATCH 6.6 085/121] net/mlx5e: Fix CT entry update leaks of modify header context

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Mi <cmi@nvidia.com>

[ Upstream commit 025f2b85a5e5a46df14ecf162c3c80a957a36d0b ]

The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.

Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.

Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
index fadfa8b50bebe..8c4e3ecef5901 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
@@ -920,6 +920,7 @@ mlx5_tc_ct_entry_replace_rule(struct mlx5_tc_ct_priv *ct_priv,
 	mlx5_tc_ct_entry_destroy_mod_hdr(ct_priv, zone_rule->attr, mh);
 	mlx5_put_label_mapping(ct_priv, attr->ct_attr.ct_labels_id);
 err_mod_hdr:
+	*attr = *old_attr;
 	kfree(old_attr);
 err_attr:
 	kvfree(spec);
-- 
2.43.0

[PATCH 6.6 086/121] net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shahar Shitrit <shshitrit@nvidia.com>

[ Upstream commit 3f8e82a020a5c22f9b791f4ac499b8e18007fbda ]

Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.

Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 38263d5c98b34..50db127e6371b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1223,7 +1223,12 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv,
 	if (!an_changes && link_modes == eproto.admin)
 		goto out;
 
-	mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext);
+	err = mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext);
+	if (err) {
+		netdev_err(priv->netdev, "%s: failed to set ptys reg: %d\n", __func__, err);
+		goto out;
+	}
+
 	mlx5_toggle_port_link(mdev);
 
 out:
-- 
2.43.0

[PATCH 6.6 087/121] igc: Fix double reset adapter triggered from a single taprio cmd

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>

[ Upstream commit b9e7fc0aeda79031a101610b2fcb12bf031056e9 ]

Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.

TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.

To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().

Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_main.c | 33 ++++++++++++-----------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index e83700ad7e622..d80bbcdeb93ed 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6208,21 +6208,6 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
 	size_t n;
 	int i;
 
-	switch (qopt->cmd) {
-	case TAPRIO_CMD_REPLACE:
-		break;
-	case TAPRIO_CMD_DESTROY:
-		return igc_tsn_clear_schedule(adapter);
-	case TAPRIO_CMD_STATS:
-		igc_taprio_stats(adapter->netdev, &qopt->stats);
-		return 0;
-	case TAPRIO_CMD_QUEUE_STATS:
-		igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-
 	if (qopt->base_time < 0)
 		return -ERANGE;
 
@@ -6331,7 +6316,23 @@ static int igc_tsn_enable_qbv_scheduling(struct igc_adapter *adapter,
 	if (hw->mac.type != igc_i225)
 		return -EOPNOTSUPP;
 
-	err = igc_save_qbv_schedule(adapter, qopt);
+	switch (qopt->cmd) {
+	case TAPRIO_CMD_REPLACE:
+		err = igc_save_qbv_schedule(adapter, qopt);
+		break;
+	case TAPRIO_CMD_DESTROY:
+		err = igc_tsn_clear_schedule(adapter);
+		break;
+	case TAPRIO_CMD_STATS:
+		igc_taprio_stats(adapter->netdev, &qopt->stats);
+		return 0;
+	case TAPRIO_CMD_QUEUE_STATS:
+		igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+
 	if (err)
 		return err;
 
-- 
2.43.0

[PATCH 6.6 088/121] ipv6: fix ndisc_is_useropt() handling for PIO

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit a46c68debf3be3a477a69ccbf0a1d050df841676 ]

The current logic only works if the PIO is between two
other ND user options.  This fixes it so that the PIO
can also be either before or after other ND user options
(for example the first or last option in the RA).

side note: there's actually Android tests verifying
a portion of the old broken behaviour, so:
  https://android-review.googlesource.com/c/kernel/tests/+/3196704
fixes those up.

Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Patrick Rohr <prohr@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 048c796beb6e ("ipv6: adjust ndisc_is_useropt() to also return true for PIO")
Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ndisc.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 68debc78189c2..2062ab94721e3 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -227,6 +227,7 @@ struct ndisc_options *ndisc_parse_options(const struct net_device *dev,
 		return NULL;
 	memset(ndopts, 0, sizeof(*ndopts));
 	while (opt_len) {
+		bool unknown = false;
 		int l;
 		if (opt_len < sizeof(struct nd_opt_hdr))
 			return NULL;
@@ -262,22 +263,23 @@ struct ndisc_options *ndisc_parse_options(const struct net_device *dev,
 			break;
 #endif
 		default:
-			if (ndisc_is_useropt(dev, nd_opt)) {
-				ndopts->nd_useropts_end = nd_opt;
-				if (!ndopts->nd_useropts)
-					ndopts->nd_useropts = nd_opt;
-			} else {
-				/*
-				 * Unknown options must be silently ignored,
-				 * to accommodate future extension to the
-				 * protocol.
-				 */
-				ND_PRINTK(2, notice,
-					  "%s: ignored unsupported option; type=%d, len=%d\n",
-					  __func__,
-					  nd_opt->nd_opt_type,
-					  nd_opt->nd_opt_len);
-			}
+			unknown = true;
+		}
+		if (ndisc_is_useropt(dev, nd_opt)) {
+			ndopts->nd_useropts_end = nd_opt;
+			if (!ndopts->nd_useropts)
+				ndopts->nd_useropts = nd_opt;
+		} else if (unknown) {
+			/*
+			 * Unknown options must be silently ignored,
+			 * to accommodate future extension to the
+			 * protocol.
+			 */
+			ND_PRINTK(2, notice,
+				  "%s: ignored unsupported option; type=%d, len=%d\n",
+				  __func__,
+				  nd_opt->nd_opt_type,
+				  nd_opt->nd_opt_len);
 		}
 next_opt:
 		opt_len -= l;
-- 
2.43.0

[PATCH 6.6 089/121] riscv: remove unused functions in traps_misaligned.c

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clément Léger <cleger@rivosinc.com>

[ Upstream commit f19c3b4239f5bfb69aacbaf75d4277c095e7aa7d ]

Replace macros by the only two function calls that are done from this
file, store_u8() and load_u8().

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231004151405.521596-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: fb197c5d2fd2 ("riscv/purgatory: align riscv_kernel_entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/traps_misaligned.c | 46 +++++-----------------------
 1 file changed, 7 insertions(+), 39 deletions(-)

diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
index 5348d842c7453..e867fe465164e 100644
--- a/arch/riscv/kernel/traps_misaligned.c
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -151,51 +151,19 @@
 #define PRECISION_S 0
 #define PRECISION_D 1
 
-#define DECLARE_UNPRIVILEGED_LOAD_FUNCTION(type, insn)			\
-static inline type load_##type(const type *addr)			\
-{									\
-	type val;							\
-	asm (#insn " %0, %1"						\
-	: "=&r" (val) : "m" (*addr));					\
-	return val;							\
-}
+static inline u8 load_u8(const u8 *addr)
+{
+	u8 val;
 
-#define DECLARE_UNPRIVILEGED_STORE_FUNCTION(type, insn)			\
-static inline void store_##type(type *addr, type val)			\
-{									\
-	asm volatile (#insn " %0, %1\n"					\
-	: : "r" (val), "m" (*addr));					\
-}
+	asm volatile("lbu %0, %1" : "=&r" (val) : "m" (*addr));
 
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u8, lbu)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u16, lhu)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(s8, lb)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(s16, lh)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(s32, lw)
-DECLARE_UNPRIVILEGED_STORE_FUNCTION(u8, sb)
-DECLARE_UNPRIVILEGED_STORE_FUNCTION(u16, sh)
-DECLARE_UNPRIVILEGED_STORE_FUNCTION(u32, sw)
-#if defined(CONFIG_64BIT)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u32, lwu)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u64, ld)
-DECLARE_UNPRIVILEGED_STORE_FUNCTION(u64, sd)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(ulong, ld)
-#else
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(u32, lw)
-DECLARE_UNPRIVILEGED_LOAD_FUNCTION(ulong, lw)
-
-static inline u64 load_u64(const u64 *addr)
-{
-	return load_u32((u32 *)addr)
-		+ ((u64)load_u32((u32 *)addr + 1) << 32);
+	return val;
 }
 
-static inline void store_u64(u64 *addr, u64 val)
+static inline void store_u8(u8 *addr, u8 val)
 {
-	store_u32((u32 *)addr, val);
-	store_u32((u32 *)addr + 1, val >> 32);
+	asm volatile ("sb %0, %1\n" : : "r" (val), "m" (*addr));
 }
-#endif
 
 static inline ulong get_insn(ulong mepc)
 {
-- 
2.43.0

[PATCH 6.6 090/121] perf: riscv: Fix selecting counters in legacy mode

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shifrin Dmitry <dmitry.shifrin@syntacore.com>

[ Upstream commit 941a8e9b7a86763ac52d5bf6ccc9986d37fde628 ]

It is required to check event type before checking event config.
Events with the different types can have the same config.
This check is missed for legacy mode code

For such perf usage:
    sysctl -w kernel.perf_user_access=2
    perf stat -e cycles,L1-dcache-loads --
driver will try to force both events to CYCLE counter.

This commit implements event type check before forcing
events on the special counters.

Signed-off-by: Shifrin Dmitry <dmitry.shifrin@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: cc4c07c89aad ("drivers: perf: Implement perf event mmap support in the SBI backend")
Link: https://lore.kernel.org/r/20240729125858.630653-1-dmitry.shifrin@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/riscv_pmu_sbi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index ae16ecb15f2d9..901da688ea3f8 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -355,7 +355,7 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
 	 * but not in the user access mode as we want to use the other counters
 	 * that support sampling/filtering.
 	 */
-	if (hwc->flags & PERF_EVENT_FLAG_LEGACY) {
+	if ((hwc->flags & PERF_EVENT_FLAG_LEGACY) && (event->attr.type == PERF_TYPE_HARDWARE)) {
 		if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) {
 			cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
 			cmask = 1;
-- 
2.43.0

[PATCH 6.6 091/121] riscv/mm: Add handling for VM_FAULT_SIGSEGV in mm_fault_error()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhe Qiao <qiaozhe@iscas.ac.cn>

[ Upstream commit 0c710050c47d45eb77b28c271cddefc5c785cb40 ]

Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel.

Fixes: 07037db5d479 ("RISC-V: Paging and MMU")
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731084547.85380-1-qiaozhe@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/mm/fault.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/riscv/mm/fault.c b/arch/riscv/mm/fault.c
index 90d4ba36d1d06..655b2b1bb529f 100644
--- a/arch/riscv/mm/fault.c
+++ b/arch/riscv/mm/fault.c
@@ -61,26 +61,27 @@ static inline void no_context(struct pt_regs *regs, unsigned long addr)
 
 static inline void mm_fault_error(struct pt_regs *regs, unsigned long addr, vm_fault_t fault)
 {
+	if (!user_mode(regs)) {
+		no_context(regs, addr);
+		return;
+	}
+
 	if (fault & VM_FAULT_OOM) {
 		/*
 		 * We ran out of memory, call the OOM killer, and return the userspace
 		 * (which will retry the fault, or kill us if we got oom-killed).
 		 */
-		if (!user_mode(regs)) {
-			no_context(regs, addr);
-			return;
-		}
 		pagefault_out_of_memory();
 		return;
 	} else if (fault & (VM_FAULT_SIGBUS | VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE)) {
 		/* Kernel mode? Handle exceptions or die */
-		if (!user_mode(regs)) {
-			no_context(regs, addr);
-			return;
-		}
 		do_trap(regs, SIGBUS, BUS_ADRERR, addr);
 		return;
+	} else if (fault & VM_FAULT_SIGSEGV) {
+		do_trap(regs, SIGSEGV, SEGV_MAPERR, addr);
+		return;
 	}
+
 	BUG();
 }
 
-- 
2.43.0

[PATCH 6.6 092/121] riscv: Fix linear mapping checks for non-contiguous memory regions

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stuart Menefy <stuart.menefy@codasip.com>

[ Upstream commit 3b6564427aea83b7a35a15ca278291d50a1edcfc ]

The RISC-V kernel already has checks to ensure that memory which would
lie outside of the linear mapping is not used. However those checks
use memory_limit, which is used to implement the mem= kernel command
line option (to limit the total amount of memory, not its address
range). When memory is made up of two or more non-contiguous memory
banks this check is incorrect.

Two changes are made here:
 - add a call in setup_bootmem() to memblock_cap_memory_range() which
   will cause any memory which falls outside the linear mapping to be
   removed from the memory regions.
 - remove the check in create_linear_mapping_page_table() which was
   intended to remove memory which is outside the liner mapping based
   on memory_limit, as it is no longer needed. Note a check for
   mapping more memory than memory_limit (to implement mem=) is
   unnecessary because of the existing call to
   memblock_enforce_memory_limit().

This issue was seen when booting on a SV39 platform with two memory
banks:
  0x00,80000000 1GiB
  0x20,00000000 32GiB
This memory range is 158GiB from top to bottom, but the linear mapping
is limited to 128GiB, so the lower block of RAM will be mapped at
PAGE_OFFSET, and the upper block straddles the top of the linear
mapping.

This causes the following Oops:
[    0.000000] Linux version 6.10.0-rc2-gd3b8dd5b51dd-dirty (stuart.menefy@codasip.com) (riscv64-codasip-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231213) #20 SMP Sat Jun 22 11:34:22 BST 2024
[    0.000000] memblock_add: [0x0000000080000000-0x00000000bfffffff] early_init_dt_add_memory_arch+0x4a/0x52
[    0.000000] memblock_add: [0x0000002000000000-0x00000027ffffffff] early_init_dt_add_memory_arch+0x4a/0x52
...
[    0.000000] memblock_alloc_try_nid: 23724 bytes align=0x8 nid=-1 from=0x0000000000000000 max_addr=0x0000000000000000 early_init_dt_alloc_memory_arch+0x1e/0x48
[    0.000000] memblock_reserve: [0x00000027ffff5350-0x00000027ffffaffb] memblock_alloc_range_nid+0xb8/0x132
[    0.000000] Unable to handle kernel paging request at virtual address fffffffe7fff5350
[    0.000000] Oops [#1]
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc2-gd3b8dd5b51dd-dirty #20
[    0.000000] Hardware name: codasip,a70x (DT)
[    0.000000] epc : __memset+0x8c/0x104
[    0.000000]  ra : memblock_alloc_try_nid+0x74/0x84
[    0.000000] epc : ffffffff805e88c8 ra : ffffffff806148f6 sp : ffffffff80e03d50
[    0.000000]  gp : ffffffff80ec4158 tp : ffffffff80e0bec0 t0 : fffffffe7fff52f8
[    0.000000]  t1 : 00000027ffffb000 t2 : 5f6b636f6c626d65 s0 : ffffffff80e03d90
[    0.000000]  s1 : 0000000000005cac a0 : fffffffe7fff5350 a1 : 0000000000000000
[    0.000000]  a2 : 0000000000005cac a3 : fffffffe7fffaff8 a4 : 000000000000002c
[    0.000000]  a5 : ffffffff805e88c8 a6 : 0000000000005cac a7 : 0000000000000030
[    0.000000]  s2 : fffffffe7fff5350 s3 : ffffffffffffffff s4 : 0000000000000000
[    0.000000]  s5 : ffffffff8062347e s6 : 0000000000000000 s7 : 0000000000000001
[    0.000000]  s8 : 0000000000002000 s9 : 00000000800226d0 s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : ffffffff8080a928 t4 : ffffffff8080a928
[    0.000000]  t5 : ffffffff8080a928 t6 : ffffffff8080a940
[    0.000000] status: 0000000200000100 badaddr: fffffffe7fff5350 cause: 000000000000000f
[    0.000000] [<ffffffff805e88c8>] __memset+0x8c/0x104
[    0.000000] [<ffffffff8062349c>] early_init_dt_alloc_memory_arch+0x1e/0x48
[    0.000000] [<ffffffff8043e892>] __unflatten_device_tree+0x52/0x114
[    0.000000] [<ffffffff8062441e>] unflatten_device_tree+0x9e/0xb8
[    0.000000] [<ffffffff806046fe>] setup_arch+0xd4/0x5bc
[    0.000000] [<ffffffff806007aa>] start_kernel+0x76/0x81a
[    0.000000] Code: b823 02b2 bc23 02b2 b023 04b2 b423 04b2 b823 04b2 (bc23) 04b2
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

The problem is that memblock (unaware that some physical memory cannot
be used) has allocated memory from the top of memory but which is
outside the linear mapping region.

Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com>
Fixes: c99127c45248 ("riscv: Make sure the linear mapping does not use the kernel mapping")
Reviewed-by: David McKay <david.mckay@codasip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240622114217.2158495-1-stuart.menefy@codasip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/mm/init.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 8adcb9419ad50..9b10e9655df8c 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -217,8 +217,6 @@ static void __init setup_bootmem(void)
 	 */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-	phys_ram_end = memblock_end_of_DRAM();
-
 	/*
 	 * Make sure we align the start of the memory on a PMD boundary so that
 	 * at worst, we map the linear mapping with PMD mappings.
@@ -233,6 +231,16 @@ static void __init setup_bootmem(void)
 	if (IS_ENABLED(CONFIG_64BIT) && IS_ENABLED(CONFIG_MMU))
 		kernel_map.va_pa_offset = PAGE_OFFSET - phys_ram_base;
 
+	/*
+	 * The size of the linear page mapping may restrict the amount of
+	 * usable RAM.
+	 */
+	if (IS_ENABLED(CONFIG_64BIT)) {
+		max_mapped_addr = __pa(PAGE_OFFSET) + KERN_VIRT_SIZE;
+		memblock_cap_memory_range(phys_ram_base,
+					  max_mapped_addr - phys_ram_base);
+	}
+
 	/*
 	 * Reserve physical address space that would be mapped to virtual
 	 * addresses greater than (void *)(-PAGE_SIZE) because:
@@ -249,6 +257,7 @@ static void __init setup_bootmem(void)
 		memblock_reserve(max_mapped_addr, (phys_addr_t)-max_mapped_addr);
 	}
 
+	phys_ram_end = memblock_end_of_DRAM();
 	min_low_pfn = PFN_UP(phys_ram_base);
 	max_low_pfn = max_pfn = PFN_DOWN(phys_ram_end);
 	high_memory = (void *)(__va(PFN_PHYS(max_low_pfn)));
@@ -1269,8 +1278,6 @@ static void __init create_linear_mapping_page_table(void)
 		if (start <= __pa(PAGE_OFFSET) &&
 		    __pa(PAGE_OFFSET) < end)
 			start = __pa(PAGE_OFFSET);
-		if (end >= __pa(PAGE_OFFSET) + memory_limit)
-			end = __pa(PAGE_OFFSET) + memory_limit;
 
 		create_linear_mapping_range(start, end, 0);
 	}
-- 
2.43.0

[PATCH 6.6 093/121] arm64: jump_label: Ensure patched jump_labels are visible to all CPUs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will@kernel.org>

[ Upstream commit cfb00a35786414e7c0e6226b277d9f09657eae74 ]

Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:

 >  When the modified instructions are observable, each PE that is
 >  executing the modified instructions must execute an ISB or perform a
 >  context synchronizing event to ensure execution of the modified
 >  instructions

Prior to commit f6cc0c501649 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.

In hindsight, the analysis of the issue in f6cc0c501649 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c501649, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254bd
("clocksource/arm_arch_timer: Remove use of workaround static key").

This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.

Rather than revert f6cc0c501649 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.

Cc: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: f6cc0c501649 ("arm64: Avoid calling stop_machine() when patching jump labels")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/jump_label.h |  1 +
 arch/arm64/kernel/jump_label.c      | 11 +++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h
index 6aafbb7899916..4b99159150829 100644
--- a/arch/arm64/include/asm/jump_label.h
+++ b/arch/arm64/include/asm/jump_label.h
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <asm/insn.h>
 
+#define HAVE_JUMP_LABEL_BATCH
 #define JUMP_LABEL_NOP_SIZE		AARCH64_INSN_SIZE
 
 static __always_inline bool arch_static_branch(struct static_key * const key,
diff --git a/arch/arm64/kernel/jump_label.c b/arch/arm64/kernel/jump_label.c
index faf88ec9c48e8..f63ea915d6ad2 100644
--- a/arch/arm64/kernel/jump_label.c
+++ b/arch/arm64/kernel/jump_label.c
@@ -7,11 +7,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/jump_label.h>
+#include <linux/smp.h>
 #include <asm/insn.h>
 #include <asm/patching.h>
 
-void arch_jump_label_transform(struct jump_entry *entry,
-			       enum jump_label_type type)
+bool arch_jump_label_transform_queue(struct jump_entry *entry,
+				     enum jump_label_type type)
 {
 	void *addr = (void *)jump_entry_code(entry);
 	u32 insn;
@@ -25,4 +26,10 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	}
 
 	aarch64_insn_patch_text_nosync(addr, insn);
+	return true;
+}
+
+void arch_jump_label_transform_apply(void)
+{
+	kick_all_cpus_sync();
 }
-- 
2.43.0

[PATCH 6.6 094/121] rust: SHADOW_CALL_STACK is incompatible with Rust

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alice Ryhl <aliceryhl@google.com>

commit f126745da81783fb1d082e67bf14c6795e489a88 upstream.

When using the shadow call stack sanitizer, all code must be compiled
with the -ffixed-x18 flag, but this flag is not currently being passed
to Rust. This results in crashes that are extremely difficult to debug.

To ensure that nobody else has to go through the same debugging session
that I had to, prevent configurations that enable both SHADOW_CALL_STACK
and RUST.

It is rather common for people to backport 724a75ac9542 ("arm64: rust:
Enable Rust support for AArch64"), so I recommend applying this fix all
the way back to 6.1.

Cc: stable@vger.kernel.org # 6.1 and later
Fixes: 724a75ac9542 ("arm64: rust: Enable Rust support for AArch64")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240729-shadow-call-stack-v4-1-2a664b082ea4@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 init/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1898,6 +1898,7 @@ config RUST
 	depends on !MODVERSIONS
 	depends on !GCC_PLUGINS
 	depends on !RANDSTRUCT
+	depends on !SHADOW_CALL_STACK
 	depends on !DEBUG_INFO_BTF || PAHOLE_HAS_LANG_EXCLUDE
 	help
 	  Enables Rust support in the kernel.

[PATCH 6.6 095/121] platform/chrome: cros_ec_proto: Lock device when updating MKBP version

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patryk Duda <patrykd@google.com>

commit df615907f1bf907260af01ccb904d0e9304b5278 upstream.

The cros_ec_get_host_command_version_mask() function requires that the
caller must have ec_dev->lock mutex before calling it. This requirement
was not met and as a result it was possible that two commands were sent
to the device at the same time.

The problem was observed while using UART backend which doesn't use any
additional locks, unlike SPI backend which locks the controller until
response is received.

Fixes: f74c7557ed0d ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure")
Cc: stable@vger.kernel.org
Signed-off-by: Patryk Duda <patrykd@google.com>
Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/chrome/cros_ec_proto.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -805,9 +805,11 @@ int cros_ec_get_next_event(struct cros_e
 	if (ret == -ENOPROTOOPT) {
 		dev_dbg(ec_dev->dev,
 			"GET_NEXT_EVENT returned invalid version error.\n");
+		mutex_lock(&ec_dev->lock);
 		ret = cros_ec_get_host_command_version_mask(ec_dev,
 							EC_CMD_GET_NEXT_EVENT,
 							&ver_mask);
+		mutex_unlock(&ec_dev->lock);
 		if (ret < 0 || ver_mask == 0)
 			/*
 			 * Do not change the MKBP supported version if we can't

[PATCH 6.6 096/121] HID: wacom: Modify pen IDs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>

commit f0d17d696dfce77c9abc830e4ac2d677890a2dad upstream.

The pen ID, 0x80842, was not the correct ID for wacom driver to
treat. The ID was corrected to 0x8842.
Also, 0x4200 was not the expected ID used on any Wacom device.
Therefore, 0x4200 was removed.

Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.wacom@gmail.com>
Fixes: bfdc750c4cb2 ("HID: wacom: add three styli to wacom_intuos_get_tool_type")
Cc: stable@kernel.org #6.2
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://patch.msgid.link/20240709055729.17158-1-tatsunosuke.wacom@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -714,13 +714,12 @@ static int wacom_intuos_get_tool_type(in
 	case 0x8e2: /* IntuosHT2 pen */
 	case 0x022:
 	case 0x200: /* Pro Pen 3 */
-	case 0x04200: /* Pro Pen 3 */
 	case 0x10842: /* MobileStudio Pro Pro Pen slim */
 	case 0x14802: /* Intuos4/5 13HD/24HD Classic Pen */
 	case 0x16802: /* Cintiq 13HD Pro Pen */
 	case 0x18802: /* DTH2242 Pen */
 	case 0x10802: /* Intuos4/5 13HD/24HD General Pen */
-	case 0x80842: /* Intuos Pro and Cintiq Pro 3D Pen */
+	case 0x8842: /* Intuos Pro and Cintiq Pro 3D Pen */
 		tool_type = BTN_TOOL_PEN;
 		break;
 

[PATCH 6.6 097/121] btrfs: zoned: fix zone_unusable accounting on making block group read-write again

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naohiro Aota <naohiro.aota@wdc.com>

commit 8cd44dd1d17a23d5cc8c443c659ca57aa76e2fa5 upstream.

When btrfs makes a block group read-only, it adds all free regions in the
block group to space_info->bytes_readonly. That free space excludes
reserved and pinned regions. OTOH, when btrfs makes the block group
read-write again, it moves all the unused regions into the block group's
zone_unusable. That unused region includes reserved and pinned regions.
As a result, it counts too much zone_unusable bytes.

Fortunately (or unfortunately), having erroneous zone_unusable does not
affect the calculation of space_info->bytes_readonly, because free
space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on
the erroneous zone_unusable and it reduces the num_bytes just to cancel the
error.

This behavior can be easily discovered by adding a WARN_ON to check e.g,
"bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test
case like btrfs/282.

Fix it by properly considering pinned and reserved in
btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce
btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake.

Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/block-group.c       |   13 ++++++++-----
 fs/btrfs/extent-tree.c       |    3 ++-
 fs/btrfs/free-space-cache.c  |    4 +++-
 fs/btrfs/space-info.c        |    2 +-
 fs/btrfs/space-info.h        |    1 +
 include/trace/events/btrfs.h |    8 ++++++++
 6 files changed, 23 insertions(+), 8 deletions(-)

--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -1214,8 +1214,8 @@ int btrfs_remove_block_group(struct btrf
 	block_group->space_info->total_bytes -= block_group->length;
 	block_group->space_info->bytes_readonly -=
 		(block_group->length - block_group->zone_unusable);
-	block_group->space_info->bytes_zone_unusable -=
-		block_group->zone_unusable;
+	btrfs_space_info_update_bytes_zone_unusable(fs_info, block_group->space_info,
+						    -block_group->zone_unusable);
 	block_group->space_info->disk_total -= block_group->length * factor;
 
 	spin_unlock(&block_group->space_info->lock);
@@ -1399,7 +1399,8 @@ static int inc_block_group_ro(struct btr
 		if (btrfs_is_zoned(cache->fs_info)) {
 			/* Migrate zone_unusable bytes to readonly */
 			sinfo->bytes_readonly += cache->zone_unusable;
-			sinfo->bytes_zone_unusable -= cache->zone_unusable;
+			btrfs_space_info_update_bytes_zone_unusable(cache->fs_info, sinfo,
+								    -cache->zone_unusable);
 			cache->zone_unusable = 0;
 		}
 		cache->ro++;
@@ -3023,9 +3024,11 @@ void btrfs_dec_block_group_ro(struct btr
 		if (btrfs_is_zoned(cache->fs_info)) {
 			/* Migrate zone_unusable bytes back */
 			cache->zone_unusable =
-				(cache->alloc_offset - cache->used) +
+				(cache->alloc_offset - cache->used - cache->pinned -
+				 cache->reserved) +
 				(cache->length - cache->zone_capacity);
-			sinfo->bytes_zone_unusable += cache->zone_unusable;
+			btrfs_space_info_update_bytes_zone_unusable(cache->fs_info, sinfo,
+								    cache->zone_unusable);
 			sinfo->bytes_readonly -= cache->zone_unusable;
 		}
 		num_bytes = cache->length - cache->reserved -
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2749,7 +2749,8 @@ static int unpin_extent_range(struct btr
 			readonly = true;
 		} else if (btrfs_is_zoned(fs_info)) {
 			/* Need reset before reusing in a zoned block group */
-			space_info->bytes_zone_unusable += len;
+			btrfs_space_info_update_bytes_zone_unusable(fs_info, space_info,
+								    len);
 			readonly = true;
 		}
 		spin_unlock(&cache->lock);
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -2721,8 +2721,10 @@ static int __btrfs_add_free_space_zoned(
 	 * If the block group is read-only, we should account freed space into
 	 * bytes_readonly.
 	 */
-	if (!block_group->ro)
+	if (!block_group->ro) {
 		block_group->zone_unusable += to_unusable;
+		WARN_ON(block_group->zone_unusable > block_group->length);
+	}
 	spin_unlock(&ctl->tree_lock);
 	if (!used) {
 		spin_lock(&block_group->lock);
--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -312,7 +312,7 @@ void btrfs_add_bg_to_space_info(struct b
 	found->bytes_used += block_group->used;
 	found->disk_used += block_group->used * factor;
 	found->bytes_readonly += block_group->bytes_super;
-	found->bytes_zone_unusable += block_group->zone_unusable;
+	btrfs_space_info_update_bytes_zone_unusable(info, found, block_group->zone_unusable);
 	if (block_group->length > 0)
 		found->full = 0;
 	btrfs_try_granting_tickets(info, found);
--- a/fs/btrfs/space-info.h
+++ b/fs/btrfs/space-info.h
@@ -197,6 +197,7 @@ btrfs_space_info_update_##name(struct bt
 
 DECLARE_SPACE_INFO_UPDATE(bytes_may_use, "space_info");
 DECLARE_SPACE_INFO_UPDATE(bytes_pinned, "pinned");
+DECLARE_SPACE_INFO_UPDATE(bytes_zone_unusable, "zone_unusable");
 
 int btrfs_init_space_info(struct btrfs_fs_info *fs_info);
 void btrfs_add_bg_to_space_info(struct btrfs_fs_info *info,
--- a/include/trace/events/btrfs.h
+++ b/include/trace/events/btrfs.h
@@ -2430,6 +2430,14 @@ DEFINE_EVENT(btrfs__space_info_update, u
 	TP_ARGS(fs_info, sinfo, old, diff)
 );
 
+DEFINE_EVENT(btrfs__space_info_update, update_bytes_zone_unusable,
+
+	TP_PROTO(const struct btrfs_fs_info *fs_info,
+		 const struct btrfs_space_info *sinfo, u64 old, s64 diff),
+
+	TP_ARGS(fs_info, sinfo, old, diff)
+);
+
 DECLARE_EVENT_CLASS(btrfs_raid56_bio,
 
 	TP_PROTO(const struct btrfs_raid_bio *rbio,

[PATCH 6.6 098/121] btrfs: do not subtract delalloc from avail bytes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naohiro Aota <naohiro.aota@wdc.com>

commit d89c285d28491d8f10534c262ac9e6bdcbe1b4d2 upstream.

The block group's avail bytes printed when dumping a space info subtract
the delalloc_bytes. However, as shown in btrfs_add_reserved_bytes() and
btrfs_free_reserved_bytes(), it is added or subtracted along with
"reserved" for the delalloc case, which means the "delalloc_bytes" is a
part of the "reserved" bytes. So, excluding it to calculate the avail space
counts delalloc_bytes twice, which can lead to an invalid result.

Fixes: e50b122b832b ("btrfs: print available space for a block group when dumping a space info")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/space-info.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/btrfs/space-info.c
+++ b/fs/btrfs/space-info.c
@@ -524,8 +524,7 @@ again:
 
 		spin_lock(&cache->lock);
 		avail = cache->length - cache->used - cache->pinned -
-			cache->reserved - cache->delalloc_bytes -
-			cache->bytes_super - cache->zone_unusable;
+			cache->reserved - cache->bytes_super - cache->zone_unusable;
 		btrfs_info(fs_info,
 "block group %llu has %llu bytes, %llu used %llu pinned %llu reserved %llu delalloc %llu super %llu zone_unusable (%llu bytes available) %s",
 			   cache->start, cache->length, cache->used, cache->pinned,

[PATCH 6.6 099/121] protect the fetch of ->fd[fd] in do_dup2() from mispredictions

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 8aa37bde1a7b645816cda8b80df4753ecf172bf1 upstream.

both callers have verified that fd is not greater than ->max_fds;
however, misprediction might end up with
        tofree = fdt->fd[fd];
being speculatively executed.  That's wrong for the same reasons
why it's wrong in close_fd()/file_close_fd_locked(); the same
solution applies - array_index_nospec(fd, fdt->max_fds) could differ
from fd only in case of speculative execution on mispredicted path.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/file.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/file.c
+++ b/fs/file.c
@@ -1124,6 +1124,7 @@ __releases(&files->file_lock)
 	 * tables and this condition does not arise without those.
 	 */
 	fdt = files_fdtable(files);
+	fd = array_index_nospec(fd, fdt->max_fds);
 	tofree = fdt->fd[fd];
 	if (!tofree && fd_is_open(fd, fdt))
 		goto Ebusy;

[PATCH 6.6 100/121] mptcp: sched: check both directions for backup

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit b6a66e521a2032f7fcba2af5a9bcbaeaa19b7ca3 upstream.

The 'mptcp_subflow_context' structure has two items related to the
backup flags:

 - 'backup': the subflow has been marked as backup by the other peer

 - 'request_bkup': the backup flag has been set by the host

Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.

Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/events/mptcp.h |    2 +-
 net/mptcp/protocol.c         |   10 ++++++----
 2 files changed, 7 insertions(+), 5 deletions(-)

--- a/include/trace/events/mptcp.h
+++ b/include/trace/events/mptcp.h
@@ -34,7 +34,7 @@ TRACE_EVENT(mptcp_subflow_get_send,
 		struct sock *ssk;
 
 		__entry->active = mptcp_subflow_active(subflow);
-		__entry->backup = subflow->backup;
+		__entry->backup = subflow->backup || subflow->request_bkup;
 
 		if (subflow->tcp_sock && sk_fullsock(subflow->tcp_sock))
 			__entry->free = sk_stream_memory_free(subflow->tcp_sock);
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1417,13 +1417,15 @@ struct sock *mptcp_subflow_get_send(stru
 	}
 
 	mptcp_for_each_subflow(msk, subflow) {
+		bool backup = subflow->backup || subflow->request_bkup;
+
 		trace_mptcp_subflow_get_send(subflow);
 		ssk =  mptcp_subflow_tcp_sock(subflow);
 		if (!mptcp_subflow_active(subflow))
 			continue;
 
 		tout = max(tout, mptcp_timeout_from_subflow(subflow));
-		nr_active += !subflow->backup;
+		nr_active += !backup;
 		pace = subflow->avg_pacing_rate;
 		if (unlikely(!pace)) {
 			/* init pacing rate from socket */
@@ -1434,9 +1436,9 @@ struct sock *mptcp_subflow_get_send(stru
 		}
 
 		linger_time = div_u64((u64)READ_ONCE(ssk->sk_wmem_queued) << 32, pace);
-		if (linger_time < send_info[subflow->backup].linger_time) {
-			send_info[subflow->backup].ssk = ssk;
-			send_info[subflow->backup].linger_time = linger_time;
+		if (linger_time < send_info[backup].linger_time) {
+			send_info[backup].ssk = ssk;
+			send_info[backup].linger_time = linger_time;
 		}
 	}
 	__mptcp_set_timeout(sk, tout);

[PATCH 6.6 101/121] ALSA: usb-audio: Correct surround channels in UAC1 channel map

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit b7b7e1ab7619deb3b299b5e5c619c3e6f183a12d upstream.

USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right
surround channels for UAC1 channel map, respectively.  But they should
have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are
rather "side" channels, not "surround".  I guess I took those
mistakenly when I read the spec mentioning "surround left".

This patch corrects those entries to be the right channels.

Suggested-by: Sylvain BERTRAND <sylvain.bertrand@legeek.net>
Closes: https://lore.kernel.orgZ/qIyJD8lhd8hFhlC@freedom
Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240731142018.24750-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/stream.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -244,8 +244,8 @@ static struct snd_pcm_chmap_elem *conver
 		SNDRV_CHMAP_FR,		/* right front */
 		SNDRV_CHMAP_FC,		/* center front */
 		SNDRV_CHMAP_LFE,	/* LFE */
-		SNDRV_CHMAP_SL,		/* left surround */
-		SNDRV_CHMAP_SR,		/* right surround */
+		SNDRV_CHMAP_RL,		/* left surround */
+		SNDRV_CHMAP_RR,		/* right surround */
 		SNDRV_CHMAP_FLC,	/* left of center */
 		SNDRV_CHMAP_FRC,	/* right of center */
 		SNDRV_CHMAP_RC,		/* surround */

[PATCH 6.6 102/121] ALSA: hda/realtek: Add quirk for Acer Aspire E5-574G

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>

commit 3c0b6f924e1259ade38587ea719b693f6f6f2f3e upstream.

ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST fixes combo jack detection and
limits the internal microphone boost that causes clipping on this model.

Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240728123601.144017-1-mavchatz@protonmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9639,6 +9639,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
 	SND_PCI_QUIRK(0x1025, 0x080d, "Acer Aspire V5-122P", ALC269_FIXUP_ASPIRE_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1025, 0x0840, "Acer Aspire E1", ALC269VB_FIXUP_ASPIRE_E1_COEF),
+	SND_PCI_QUIRK(0x1025, 0x100c, "Acer Aspire E5-574G", ALC255_FIXUP_ACER_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x1025, 0x101c, "Acer Veriton N2510G", ALC269_FIXUP_LIFEBOOK),
 	SND_PCI_QUIRK(0x1025, 0x102b, "Acer Aspire C24-860", ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1025, 0x1065, "Acer Aspire C20-820", ALC269VC_FIXUP_ACER_HEADSET_MIC),

[PATCH 6.6 103/121] ALSA: seq: ump: Optimize conversions from SysEx to UMP

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 952b13c215234855d75ef4b5bb0138075e73677c upstream.

The current conversion from the legacy SysEx event to UMP SysEx packet
in the sequencer core has a couple of issues:

* The first packet trims the SysEx start byte (0xf0), hence it
  contains only 5 bytes instead of 6.  This isn't wrong, per
  specification, but it's strange not to fill 6 bytes.

* When the SysEx end marker (0xf7) is placed at the first byte of the
  next packet, it'll end up with an empty data just with the END
  status.  It can be rather folded into the previous packet with the
  END status.

This patch tries to address those issues.  The first packet may have 6
bytes even with the SysEx start, and an empty packet with the SysEx
end marker is omitted.

Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240726143455.3254-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/seq/seq_ump_convert.c | 41 +++++++++++++++++++-------------
 1 file changed, 25 insertions(+), 16 deletions(-)

diff --git a/sound/core/seq/seq_ump_convert.c b/sound/core/seq/seq_ump_convert.c
index e90b27a135e6..d9dacfbe4a9a 100644
--- a/sound/core/seq/seq_ump_convert.c
+++ b/sound/core/seq/seq_ump_convert.c
@@ -1192,44 +1192,53 @@ static int cvt_sysex_to_ump(struct snd_seq_client *dest,
 {
 	struct snd_seq_ump_event ev_cvt;
 	unsigned char status;
-	u8 buf[6], *xbuf;
+	u8 buf[8], *xbuf;
 	int offset = 0;
 	int len, err;
+	bool finished = false;
 
 	if (!snd_seq_ev_is_variable(event))
 		return 0;
 
 	setup_ump_event(&ev_cvt, event);
-	for (;;) {
+	while (!finished) {
 		len = snd_seq_expand_var_event_at(event, sizeof(buf), buf, offset);
 		if (len <= 0)
 			break;
-		if (WARN_ON(len > 6))
+		if (WARN_ON(len > sizeof(buf)))
 			break;
-		offset += len;
+
 		xbuf = buf;
+		status = UMP_SYSEX_STATUS_CONTINUE;
+		/* truncate the sysex start-marker */
 		if (*xbuf == UMP_MIDI1_MSG_SYSEX_START) {
 			status = UMP_SYSEX_STATUS_START;
-			xbuf++;
 			len--;
-			if (len > 0 && xbuf[len - 1] == UMP_MIDI1_MSG_SYSEX_END) {
-				status = UMP_SYSEX_STATUS_SINGLE;
-				len--;
-			}
-		} else {
-			if (xbuf[len - 1] == UMP_MIDI1_MSG_SYSEX_END) {
-				status = UMP_SYSEX_STATUS_END;
-				len--;
-			} else {
-				status = UMP_SYSEX_STATUS_CONTINUE;
-			}
+			offset++;
+			xbuf++;
 		}
+
+		/* if the last of this packet or the 1st byte of the next packet
+		 * is the end-marker, finish the transfer with this packet
+		 */
+		if (len > 0 && len < 8 &&
+		    xbuf[len - 1] == UMP_MIDI1_MSG_SYSEX_END) {
+			if (status == UMP_SYSEX_STATUS_START)
+				status = UMP_SYSEX_STATUS_SINGLE;
+			else
+				status = UMP_SYSEX_STATUS_END;
+			len--;
+			finished = true;
+		}
+
+		len = min(len, 6);
 		fill_sysex7_ump(dest_port, ev_cvt.ump, status, xbuf, len);
 		err = __snd_seq_deliver_single_event(dest, dest_port,
 						     (struct snd_seq_event *)&ev_cvt,
 						     atomic, hop);
 		if (err < 0)
 			return err;
+		offset += len;
 	}
 	return 0;
 }
-- 
2.46.0

[PATCH 6.6 104/121] Revert "ALSA: firewire-lib: obsolete workqueue for period update"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Edmund Raile <edmund.raile@protonmail.com>

commit 6ccf9984d6be3c2f804087b736db05c2ec42664b upstream.

prepare resolution of AB/BA deadlock competition for substream lock:
restore workqueue previously used for process context:

revert commit b5b519965c4c ("ALSA: firewire-lib: obsolete workqueue
for period update")

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg76hzeo4simnl@jn3eo7pe642q/
Signed-off-by: Edmund Raile <edmund.raile@protonmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240730195318.869840-2-edmund.raile@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream.c |   15 +++++++++++++++
 sound/firewire/amdtp-stream.h |    1 +
 2 files changed, 16 insertions(+)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -77,6 +77,8 @@
 // overrun. Actual device can skip more, then this module stops the packet streaming.
 #define IR_JUMBO_PAYLOAD_MAX_SKIP_CYCLES	5
 
+static void pcm_period_work(struct work_struct *work);
+
 /**
  * amdtp_stream_init - initialize an AMDTP stream structure
  * @s: the AMDTP stream to initialize
@@ -105,6 +107,7 @@ int amdtp_stream_init(struct amdtp_strea
 	s->flags = flags;
 	s->context = ERR_PTR(-1);
 	mutex_init(&s->mutex);
+	INIT_WORK(&s->period_work, pcm_period_work);
 	s->packet_index = 0;
 
 	init_waitqueue_head(&s->ready_wait);
@@ -347,6 +350,7 @@ EXPORT_SYMBOL(amdtp_stream_get_max_paylo
  */
 void amdtp_stream_pcm_prepare(struct amdtp_stream *s)
 {
+	cancel_work_sync(&s->period_work);
 	s->pcm_buffer_pointer = 0;
 	s->pcm_period_pointer = 0;
 }
@@ -624,6 +628,16 @@ static void update_pcm_pointers(struct a
 	}
 }
 
+static void pcm_period_work(struct work_struct *work)
+{
+	struct amdtp_stream *s = container_of(work, struct amdtp_stream,
+					      period_work);
+	struct snd_pcm_substream *pcm = READ_ONCE(s->pcm);
+
+	if (pcm)
+		snd_pcm_period_elapsed(pcm);
+}
+
 static int queue_packet(struct amdtp_stream *s, struct fw_iso_packet *params,
 			bool sched_irq)
 {
@@ -1912,6 +1926,7 @@ static void amdtp_stream_stop(struct amd
 		return;
 	}
 
+	cancel_work_sync(&s->period_work);
 	fw_iso_context_stop(s->context);
 	fw_iso_context_destroy(s->context);
 	s->context = ERR_PTR(-1);
--- a/sound/firewire/amdtp-stream.h
+++ b/sound/firewire/amdtp-stream.h
@@ -191,6 +191,7 @@ struct amdtp_stream {
 
 	/* For a PCM substream processing. */
 	struct snd_pcm_substream *pcm;
+	struct work_struct period_work;
 	snd_pcm_uframes_t pcm_buffer_pointer;
 	unsigned int pcm_period_pointer;
 	unsigned int pcm_frame_multiplier;

[PATCH 6.6 105/121] Revert "ALSA: firewire-lib: operate for period elapse event in process context"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Edmund Raile <edmund.raile@protonmail.com>

commit 3dab73ab925a51ab05543b491bf17463a48ca323 upstream.

Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event
in process context") removed the process context workqueue from
amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove
its overhead.

With RME Fireface 800, this lead to a regression since
Kernels 5.14.0, causing an AB/BA deadlock competition for the
substream lock with eventual system freeze under ALSA operation:

thread 0:
    * (lock A) acquire substream lock by
	snd_pcm_stream_lock_irq() in
	snd_pcm_status64()
    * (lock B) wait for tasklet to finish by calling
    	tasklet_unlock_spin_wait() in
	tasklet_disable_in_atomic() in
	ohci_flush_iso_completions() of ohci.c

thread 1:
    * (lock B) enter tasklet
    * (lock A) attempt to acquire substream lock,
    	waiting for it to be released:
	snd_pcm_stream_lock_irqsave() in
    	snd_pcm_period_elapsed() in
	update_pcm_pointers() in
	process_ctx_payloads() in
	process_rx_packets() of amdtp-stream.c

? tasklet_unlock_spin_wait
 </NMI>
 <TASK>
ohci_flush_iso_completions firewire_ohci
amdtp_domain_stream_pcm_pointer snd_firewire_lib
snd_pcm_update_hw_ptr0 snd_pcm
snd_pcm_status64 snd_pcm

? native_queued_spin_lock_slowpath
 </NMI>
 <IRQ>
_raw_spin_lock_irqsave
snd_pcm_period_elapsed snd_pcm
process_rx_packets snd_firewire_lib
irq_target_callback snd_firewire_lib
handle_it_packet firewire_ohci
context_tasklet firewire_ohci

Restore the process context work queue to prevent deadlock
AB/BA deadlock competition for ALSA substream lock of
snd_pcm_stream_lock_irq() in snd_pcm_status64()
and snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed().

revert commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period
elapse event in process context")

Replace inline description to prevent future deadlock.

Cc: stable@vger.kernel.org
Fixes: 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context")
Reported-by: edmund.raile <edmund.raile@proton.me>
Closes: https://lore.kernel.org/r/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg76hzeo4simnl@jn3eo7pe642q/
Signed-off-by: Edmund Raile <edmund.raile@protonmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240730195318.869840-3-edmund.raile@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream.c |   23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -615,16 +615,8 @@ static void update_pcm_pointers(struct a
 		// The program in user process should periodically check the status of intermediate
 		// buffer associated to PCM substream to process PCM frames in the buffer, instead
 		// of receiving notification of period elapsed by poll wait.
-		if (!pcm->runtime->no_period_wakeup) {
-			if (in_softirq()) {
-				// In software IRQ context for 1394 OHCI.
-				snd_pcm_period_elapsed(pcm);
-			} else {
-				// In process context of ALSA PCM application under acquired lock of
-				// PCM substream.
-				snd_pcm_period_elapsed_under_stream_lock(pcm);
-			}
-		}
+		if (!pcm->runtime->no_period_wakeup)
+			queue_work(system_highpri_wq, &s->period_work);
 	}
 }
 
@@ -1866,11 +1858,14 @@ unsigned long amdtp_domain_stream_pcm_po
 {
 	struct amdtp_stream *irq_target = d->irq_target;
 
-	// Process isochronous packets queued till recent isochronous cycle to handle PCM frames.
 	if (irq_target && amdtp_stream_running(irq_target)) {
-		// In software IRQ context, the call causes dead-lock to disable the tasklet
-		// synchronously.
-		if (!in_softirq())
+		// use wq to prevent AB/BA deadlock competition for
+		// substream lock:
+		// fw_iso_context_flush_completions() acquires
+		// lock by ohci_flush_iso_completions(),
+		// amdtp-stream process_rx_packets() attempts to
+		// acquire same lock by snd_pcm_elapsed()
+		if (current_work() != &s->period_work)
 			fw_iso_context_flush_completions(irq_target->context);
 	}
 

[PATCH 6.6 106/121] drm/vmwgfx: Fix a deadlock in dma buf fence polling

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zack Rusin <zack.rusin@broadcom.com>

commit e58337100721f3cc0c7424a18730e4f39844934f upstream.

Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.

vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.

dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.

Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock.

Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 2298e804e96e ("drm/vmwgfx: rework to new fence interface, v2")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-2-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c |   17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -32,7 +32,6 @@
 #define VMW_FENCE_WRAP (1 << 31)
 
 struct vmw_fence_manager {
-	int num_fence_objects;
 	struct vmw_private *dev_priv;
 	spinlock_t lock;
 	struct list_head fence_list;
@@ -124,13 +123,13 @@ static void vmw_fence_obj_destroy(struct
 {
 	struct vmw_fence_obj *fence =
 		container_of(f, struct vmw_fence_obj, base);
-
 	struct vmw_fence_manager *fman = fman_from_fence(fence);
 
-	spin_lock(&fman->lock);
-	list_del_init(&fence->head);
-	--fman->num_fence_objects;
-	spin_unlock(&fman->lock);
+	if (!list_empty(&fence->head)) {
+		spin_lock(&fman->lock);
+		list_del_init(&fence->head);
+		spin_unlock(&fman->lock);
+	}
 	fence->destroy(fence);
 }
 
@@ -257,7 +256,6 @@ static const struct dma_fence_ops vmw_fe
 	.release = vmw_fence_obj_destroy,
 };
 
-
 /*
  * Execute signal actions on fences recently signaled.
  * This is done from a workqueue so we don't have to execute
@@ -355,7 +353,6 @@ static int vmw_fence_obj_init(struct vmw
 		goto out_unlock;
 	}
 	list_add_tail(&fence->head, &fman->fence_list);
-	++fman->num_fence_objects;
 
 out_unlock:
 	spin_unlock(&fman->lock);
@@ -403,7 +400,7 @@ static bool vmw_fence_goal_new_locked(st
 				      u32 passed_seqno)
 {
 	u32 goal_seqno;
-	struct vmw_fence_obj *fence;
+	struct vmw_fence_obj *fence, *next_fence;
 
 	if (likely(!fman->seqno_valid))
 		return false;
@@ -413,7 +410,7 @@ static bool vmw_fence_goal_new_locked(st
 		return false;
 
 	fman->seqno_valid = false;
-	list_for_each_entry(fence, &fman->fence_list, head) {
+	list_for_each_entry_safe(fence, next_fence, &fman->fence_list, head) {
 		if (!list_empty(&fence->seq_passed_actions)) {
 			fman->seqno_valid = true;
 			vmw_fence_goal_write(fman->dev_priv,

[PATCH 6.6 107/121] drm/virtio: Fix type of dma-fence context variable

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Osipenko <dmitry.osipenko@collabora.com>

commit 445d336cd15860f1efb441e6d694f829fbf679eb upstream.

Type of DMA fence context is u64. Fence-waiting code uses u32 for the
context variable, fix it.

Fixes: e4812ab8e6b1 ("drm/virtio: Refactor and optimize job submission code path")
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240714205009.3408298-1-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/virtio/virtgpu_submit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_submit.c b/drivers/gpu/drm/virtio/virtgpu_submit.c
index 1c7c7f61a222..7d34cf83f5f2 100644
--- a/drivers/gpu/drm/virtio/virtgpu_submit.c
+++ b/drivers/gpu/drm/virtio/virtgpu_submit.c
@@ -48,7 +48,7 @@ struct virtio_gpu_submit {
 static int virtio_gpu_do_fence_wait(struct virtio_gpu_submit *submit,
 				    struct dma_fence *in_fence)
 {
-	u32 context = submit->fence_ctx + submit->ring_idx;
+	u64 context = submit->fence_ctx + submit->ring_idx;
 
 	if (dma_fence_match_context(in_fence, context))
 		return 0;
-- 
2.46.0

[PATCH 6.6 108/121] drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

commit 5b511572660190db1dc8ba412efd0be0d3781ab6 upstream.

On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.

Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 82d354370189 ("drm/i915/skl: Implementation of SKL DPLL programming")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
(cherry picked from commit 833cf12846aa19adf9b76bc79c40747726f3c0c1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -1556,7 +1556,7 @@ static void skl_wrpll_params_populate(st
 }
 
 static int
-skl_ddi_calculate_wrpll(int clock /* in Hz */,
+skl_ddi_calculate_wrpll(int clock,
 			int ref_clock,
 			struct skl_wrpll_params *wrpll_params)
 {
@@ -1581,7 +1581,7 @@ skl_ddi_calculate_wrpll(int clock /* in
 	};
 	unsigned int dco, d, i;
 	unsigned int p0, p1, p2;
-	u64 afe_clock = clock * 5; /* AFE Clock is 5x Pixel clock */
+	u64 afe_clock = (u64)clock * 1000 * 5; /* AFE Clock is 5x Pixel clock, in Hz */
 
 	for (d = 0; d < ARRAY_SIZE(dividers); d++) {
 		for (dco = 0; dco < ARRAY_SIZE(dco_central_freq); dco++) {
@@ -1713,7 +1713,7 @@ static int skl_ddi_hdmi_pll_dividers(str
 
 	ctrl1 |= DPLL_CTRL1_HDMI_MODE(0);
 
-	ret = skl_ddi_calculate_wrpll(crtc_state->port_clock * 1000,
+	ret = skl_ddi_calculate_wrpll(crtc_state->port_clock,
 				      i915->display.dpll.ref_clks.nssc, &wrpll_params);
 	if (ret)
 		return ret;

[PATCH 6.6 109/121] net: usb: sr9700: fix uninitialized variable use in sr_mdio_read

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ma Ke <make24@iscas.ac.cn>

commit 08f3a5c38087d1569e982a121aad1e6acbf145ce upstream.

It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.

This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.

Found by code review.

Cc: stable@vger.kernel.org
Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/sr9700.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/net/usb/sr9700.c
+++ b/drivers/net/usb/sr9700.c
@@ -179,6 +179,7 @@ static int sr_mdio_read(struct net_devic
 	struct usbnet *dev = netdev_priv(netdev);
 	__le16 res;
 	int rc = 0;
+	int err;
 
 	if (phy_id) {
 		netdev_dbg(netdev, "Only internal phy supported\n");
@@ -189,11 +190,17 @@ static int sr_mdio_read(struct net_devic
 	if (loc == MII_BMSR) {
 		u8 value;
 
-		sr_read_reg(dev, SR_NSR, &value);
+		err = sr_read_reg(dev, SR_NSR, &value);
+		if (err < 0)
+			return err;
+
 		if (value & NSR_LINKST)
 			rc = 1;
 	}
-	sr_share_read_word(dev, 1, loc, &res);
+	err = sr_share_read_word(dev, 1, loc, &res);
+	if (err < 0)
+		return err;
+
 	if (rc == 1)
 		res = le16_to_cpu(res) | BMSR_LSTATUS;
 	else

[PATCH 6.6 110/121] r8169: dont increment tx_dropped in case of NETDEV_TX_BUSY

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

commit d516b187a9cc2e842030dd005be2735db3e8f395 upstream.

The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't
increment the tx_dropped counter.

Fixes: 188f4af04618 ("r8169: use NETDEV_TX_{BUSY/OK}")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169_main.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4256,7 +4256,8 @@ static netdev_tx_t rtl8169_start_xmit(st
 	if (unlikely(!rtl_tx_slots_avail(tp))) {
 		if (net_ratelimit())
 			netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
-		goto err_stop_0;
+		netif_stop_queue(dev);
+		return NETDEV_TX_BUSY;
 	}
 
 	opts[1] = rtl8169_tx_vlan_tag(skb);
@@ -4312,11 +4313,6 @@ err_dma_0:
 	dev_kfree_skb_any(skb);
 	dev->stats.tx_dropped++;
 	return NETDEV_TX_OK;
-
-err_stop_0:
-	netif_stop_queue(dev);
-	dev->stats.tx_dropped++;
-	return NETDEV_TX_BUSY;
 }
 
 static unsigned int rtl_last_frag_len(struct sk_buff *skb)

[PATCH 6.6 111/121] mptcp: fix user-space PM announced address accounting

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 167b93258d1e2230ee3e8a97669b4db4cc9e90aa upstream.

Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.

Add the missing accounting for the user-space PM's sake.

Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/pm_netlink.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -1565,16 +1565,25 @@ void mptcp_pm_remove_addrs(struct mptcp_
 {
 	struct mptcp_rm_list alist = { .nr = 0 };
 	struct mptcp_pm_addr_entry *entry;
+	int anno_nr = 0;
 
 	list_for_each_entry(entry, rm_list, list) {
-		if ((remove_anno_list_by_saddr(msk, &entry->addr) ||
-		     lookup_subflow_by_saddr(&msk->conn_list, &entry->addr)) &&
-		    alist.nr < MPTCP_RM_IDS_MAX)
-			alist.ids[alist.nr++] = entry->addr.id;
+		if (alist.nr >= MPTCP_RM_IDS_MAX)
+			break;
+
+		/* only delete if either announced or matching a subflow */
+		if (remove_anno_list_by_saddr(msk, &entry->addr))
+			anno_nr++;
+		else if (!lookup_subflow_by_saddr(&msk->conn_list,
+						  &entry->addr))
+			continue;
+
+		alist.ids[alist.nr++] = entry->addr.id;
 	}
 
 	if (alist.nr) {
 		spin_lock_bh(&msk->pm.lock);
+		msk->pm.add_addr_signaled -= anno_nr;
 		mptcp_pm_remove_addr(msk, &alist);
 		spin_unlock_bh(&msk->pm.lock);
 	}

[PATCH 6.6 112/121] mptcp: distinguish rcv vs sent backup flag in requests

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit efd340bf3d7779a3a8ec954d8ec0fb8a10f24982 upstream.

When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.

It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/options.c  |    2 +-
 net/mptcp/protocol.h |    1 +
 net/mptcp/subflow.c  |    1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -909,7 +909,7 @@ bool mptcp_synack_options(const struct r
 		return true;
 	} else if (subflow_req->mp_join) {
 		opts->suboptions = OPTION_MPTCP_MPJ_SYNACK;
-		opts->backup = subflow_req->backup;
+		opts->backup = subflow_req->request_bkup;
 		opts->join_id = subflow_req->local_id;
 		opts->thmac = subflow_req->thmac;
 		opts->nonce = subflow_req->local_nonce;
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -419,6 +419,7 @@ struct mptcp_subflow_request_sock {
 	u16	mp_capable : 1,
 		mp_join : 1,
 		backup : 1,
+		request_bkup : 1,
 		csum_reqd : 1,
 		allow_join_id0 : 1;
 	u8	local_id;
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -1976,6 +1976,7 @@ static void subflow_ulp_clone(const stru
 		new_ctx->fully_established = 1;
 		new_ctx->remote_key_valid = 1;
 		new_ctx->backup = subflow_req->backup;
+		new_ctx->request_bkup = subflow_req->request_bkup;
 		WRITE_ONCE(new_ctx->remote_id, subflow_req->remote_id);
 		new_ctx->token = subflow_req->token;
 		new_ctx->thmac = subflow_req->thmac;

[PATCH 6.6 113/121] mptcp: fix NL PM announced address accounting

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 4b317e0eb287bd30a1b329513531157c25e8b692 upstream.

Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.

Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.

Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/pm_netlink.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -1432,6 +1432,7 @@ static bool mptcp_pm_remove_anno_addr(st
 	ret = remove_anno_list_by_saddr(msk, addr);
 	if (ret || force) {
 		spin_lock_bh(&msk->pm.lock);
+		msk->pm.add_addr_signaled -= ret;
 		mptcp_pm_remove_addr(msk, &list);
 		spin_unlock_bh(&msk->pm.lock);
 	}
@@ -1596,17 +1597,18 @@ void mptcp_pm_remove_addrs_and_subflows(
 	struct mptcp_pm_addr_entry *entry;
 
 	list_for_each_entry(entry, rm_list, list) {
-		if (lookup_subflow_by_saddr(&msk->conn_list, &entry->addr) &&
-		    slist.nr < MPTCP_RM_IDS_MAX)
+		if (slist.nr < MPTCP_RM_IDS_MAX &&
+		    lookup_subflow_by_saddr(&msk->conn_list, &entry->addr))
 			slist.ids[slist.nr++] = entry->addr.id;
 
-		if (remove_anno_list_by_saddr(msk, &entry->addr) &&
-		    alist.nr < MPTCP_RM_IDS_MAX)
+		if (alist.nr < MPTCP_RM_IDS_MAX &&
+		    remove_anno_list_by_saddr(msk, &entry->addr))
 			alist.ids[alist.nr++] = entry->addr.id;
 	}
 
 	if (alist.nr) {
 		spin_lock_bh(&msk->pm.lock);
+		msk->pm.add_addr_signaled -= alist.nr;
 		mptcp_pm_remove_addr(msk, &alist);
 		spin_unlock_bh(&msk->pm.lock);
 	}

[PATCH 6.6 114/121] mptcp: mib: count MPJ with backup flag

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit 4dde0d72ccec500c60c798e036b852e013d6e124 upstream.

Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.

This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/mib.c     |    2 ++
 net/mptcp/mib.h     |    2 ++
 net/mptcp/subflow.c |    6 ++++++
 3 files changed, 10 insertions(+)

--- a/net/mptcp/mib.c
+++ b/net/mptcp/mib.c
@@ -19,7 +19,9 @@ static const struct snmp_mib mptcp_snmp_
 	SNMP_MIB_ITEM("MPTCPRetrans", MPTCP_MIB_RETRANSSEGS),
 	SNMP_MIB_ITEM("MPJoinNoTokenFound", MPTCP_MIB_JOINNOTOKEN),
 	SNMP_MIB_ITEM("MPJoinSynRx", MPTCP_MIB_JOINSYNRX),
+	SNMP_MIB_ITEM("MPJoinSynBackupRx", MPTCP_MIB_JOINSYNBACKUPRX),
 	SNMP_MIB_ITEM("MPJoinSynAckRx", MPTCP_MIB_JOINSYNACKRX),
+	SNMP_MIB_ITEM("MPJoinSynAckBackupRx", MPTCP_MIB_JOINSYNACKBACKUPRX),
 	SNMP_MIB_ITEM("MPJoinSynAckHMacFailure", MPTCP_MIB_JOINSYNACKMAC),
 	SNMP_MIB_ITEM("MPJoinAckRx", MPTCP_MIB_JOINACKRX),
 	SNMP_MIB_ITEM("MPJoinAckHMacFailure", MPTCP_MIB_JOINACKMAC),
--- a/net/mptcp/mib.h
+++ b/net/mptcp/mib.h
@@ -12,7 +12,9 @@ enum linux_mptcp_mib_field {
 	MPTCP_MIB_RETRANSSEGS,		/* Segments retransmitted at the MPTCP-level */
 	MPTCP_MIB_JOINNOTOKEN,		/* Received MP_JOIN but the token was not found */
 	MPTCP_MIB_JOINSYNRX,		/* Received a SYN + MP_JOIN */
+	MPTCP_MIB_JOINSYNBACKUPRX,	/* Received a SYN + MP_JOIN + backup flag */
 	MPTCP_MIB_JOINSYNACKRX,		/* Received a SYN/ACK + MP_JOIN */
+	MPTCP_MIB_JOINSYNACKBACKUPRX,	/* Received a SYN/ACK + MP_JOIN + backup flag */
 	MPTCP_MIB_JOINSYNACKMAC,	/* HMAC was wrong on SYN/ACK + MP_JOIN */
 	MPTCP_MIB_JOINACKRX,		/* Received an ACK + MP_JOIN */
 	MPTCP_MIB_JOINACKMAC,		/* HMAC was wrong on ACK + MP_JOIN */
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -166,6 +166,9 @@ static int subflow_check_req(struct requ
 			return 0;
 	} else if (opt_mp_join) {
 		SUBFLOW_REQ_INC_STATS(req, MPTCP_MIB_JOINSYNRX);
+
+		if (mp_opt.backup)
+			SUBFLOW_REQ_INC_STATS(req, MPTCP_MIB_JOINSYNBACKUPRX);
 	}
 
 	if (opt_mp_capable && listener->request_mptcp) {
@@ -558,6 +561,9 @@ static void subflow_finish_connect(struc
 		subflow->mp_join = 1;
 		MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_JOINSYNACKRX);
 
+		if (subflow->backup)
+			MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_JOINSYNACKBACKUPRX);
+
 		if (subflow_use_different_dport(msk, sk)) {
 			pr_debug("synack inet_dport=%d %d",
 				 ntohs(inet_sk(sk)->inet_dport),

[PATCH 6.6 115/121] mptcp: fix bad RCVPRUNED mib accounting

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 0a567c2a10033bf04ed618368d179bce6977984b upstream.

Since its introduction, the mentioned MIB accounted for the wrong
event: wake-up being skipped as not-needed on some edge condition
instead of incoming skb being dropped after landing in the (subflow)
receive queue.

Move the increment in the correct location.

Fixes: ce599c516386 ("mptcp: properly account bulk freed memory")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/protocol.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -352,8 +352,10 @@ static bool __mptcp_move_skb(struct mptc
 	skb_orphan(skb);
 
 	/* try to fetch required memory from subflow */
-	if (!mptcp_rmem_schedule(sk, ssk, skb->truesize))
+	if (!mptcp_rmem_schedule(sk, ssk, skb->truesize)) {
+		MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_RCVPRUNED);
 		goto drop;
+	}
 
 	has_rxtstamp = TCP_SKB_CB(skb)->has_rxtstamp;
 
@@ -842,10 +844,8 @@ void mptcp_data_ready(struct sock *sk, s
 		sk_rbuf = ssk_rbuf;
 
 	/* over limit? can't append more skbs to msk, Also, no need to wake-up*/
-	if (__mptcp_rmem(sk) > sk_rbuf) {
-		MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_RCVPRUNED);
+	if (__mptcp_rmem(sk) > sk_rbuf)
 		return;
-	}
 
 	/* Wake-up the reader only for in-sequence data */
 	mptcp_data_lock(sk);

[PATCH 6.6 116/121] mptcp: pm: only set request_bkup flag when sending MP_PRIO

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit 4258b94831bb7ff28ab80e3c8d94db37db930728 upstream.

The 'backup' flag from mptcp_subflow_context structure is supposed to be
set only when the other peer flagged a subflow as backup, not the
opposite.

Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/pm_netlink.c |    1 -
 1 file changed, 1 deletion(-)

--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -476,7 +476,6 @@ static void __mptcp_pm_send_ack(struct m
 	slow = lock_sock_fast(ssk);
 	if (prio) {
 		subflow->send_mp_prio = 1;
-		subflow->backup = backup;
 		subflow->request_bkup = backup;
 	}
 

[PATCH 6.6 117/121] mptcp: fix duplicate data handling

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 68cc924729ffcfe90d0383177192030a9aeb2ee4 upstream.

When a subflow receives and discards duplicate data, the mptcp
stack assumes that the consumed offset inside the current skb is
zero.

With multiple subflows receiving data simultaneously such assertion
does not held true. As a result the subflow-level copied_seq will
be incorrectly increased and later on the same subflow will observe
a bad mapping, leading to subflow reset.

Address the issue taking into account the skb consumed offset in
mptcp_subflow_discard_data().

Fixes: 04e4cd4f7ca4 ("mptcp: cleanup mptcp_subflow_discard_data()")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/subflow.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -1198,14 +1198,22 @@ static void mptcp_subflow_discard_data(s
 {
 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
 	bool fin = TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN;
-	u32 incr;
+	struct tcp_sock *tp = tcp_sk(ssk);
+	u32 offset, incr, avail_len;
 
-	incr = limit >= skb->len ? skb->len + fin : limit;
+	offset = tp->copied_seq - TCP_SKB_CB(skb)->seq;
+	if (WARN_ON_ONCE(offset > skb->len))
+		goto out;
 
-	pr_debug("discarding=%d len=%d seq=%d", incr, skb->len,
-		 subflow->map_subflow_seq);
+	avail_len = skb->len - offset;
+	incr = limit >= avail_len ? avail_len + fin : limit;
+
+	pr_debug("discarding=%d len=%d offset=%d seq=%d", incr, skb->len,
+		 offset, subflow->map_subflow_seq);
 	MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_DUPDATA);
 	tcp_sk(ssk)->copied_seq += incr;
+
+out:
 	if (!before(tcp_sk(ssk)->copied_seq, TCP_SKB_CB(skb)->end_seq))
 		sk_eat_skb(ssk, skb);
 	if (mptcp_subflow_get_map_offset(subflow) >= subflow->map_data_len)

[PATCH 6.6 118/121] selftests: mptcp: always close inputs FD if opened

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Jing <liujing@cmss.chinamobile.com>

commit 7c70bcc2a84cf925f655ea1ac4b8088062b144a3 upstream.

In main_loop_s function, when the open(cfg_input, O_RDONLY) function is
run, the last fd is not closed if the "--cfg_repeat > 0" branch is not
taken.

Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_connect.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_connect.c
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c
@@ -1115,11 +1115,11 @@ again:
 		return 1;
 	}
 
-	if (--cfg_repeat > 0) {
-		if (cfg_input)
-			close(fd);
+	if (cfg_input)
+		close(fd);
+
+	if (--cfg_repeat > 0)
 		goto again;
-	}
 
 	return 0;
 }

[PATCH 6.6 119/121] selftests: mptcp: join: validate backup in MPJ

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit 935ff5bb8a1cfcdf8e60c8f5c794d0bbbc234437 upstream.

A peer can notify the other one that a subflow has to be treated as
"backup" by two different ways: either by sending a dedicated MP_PRIO
notification, or by setting the backup flag in the MP_JOIN handshake.

The selftests were previously monitoring the former, but not the latter.
This is what is now done here by looking at these new MIB counters when
validating the 'backup' cases:

  MPTcpExtMPJoinSynBackupRx
  MPTcpExtMPJoinSynAckBackupRx

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it will help to validate a new fix for an issue introduced by this
commit ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |   42 ++++++++++++++++++------
 1 file changed, 32 insertions(+), 10 deletions(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -1778,6 +1778,8 @@ chk_prio_nr()
 {
 	local mp_prio_nr_tx=$1
 	local mp_prio_nr_rx=$2
+	local mpj_syn=$3
+	local mpj_syn_ack=$4
 	local count
 
 	print_check "ptx"
@@ -1799,6 +1801,26 @@ chk_prio_nr()
 	else
 		print_ok
 	fi
+
+	print_check "syn backup"
+	count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynBackupRx")
+	if [ -z "$count" ]; then
+		print_skip
+	elif [ "$count" != "$mpj_syn" ]; then
+		fail_test "got $count JOIN[s] syn with Backup expected $mpj_syn"
+	else
+		print_ok
+	fi
+
+	print_check "synack backup"
+	count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckBackupRx")
+	if [ -z "$count" ]; then
+		print_skip
+	elif [ "$count" != "$mpj_syn_ack" ]; then
+		fail_test "got $count JOIN[s] synack with Backup expected $mpj_syn_ack"
+	else
+		print_ok
+	fi
 }
 
 chk_subflow_nr()
@@ -2751,7 +2773,7 @@ backup_tests()
 		sflags=nobackup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 	fi
 
 	# single address, backup
@@ -2764,7 +2786,7 @@ backup_tests()
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	# single address with port, backup
@@ -2777,7 +2799,7 @@ backup_tests()
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	if reset "mpc backup" &&
@@ -2786,7 +2808,7 @@ backup_tests()
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 0 0
 	fi
 
 	if reset "mpc backup both sides" &&
@@ -2796,7 +2818,7 @@ backup_tests()
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	if reset "mpc switch to backup" &&
@@ -2805,7 +2827,7 @@ backup_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 0 0
 	fi
 
 	if reset "mpc switch to backup both sides" &&
@@ -2815,7 +2837,7 @@ backup_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 }
 
@@ -3215,7 +3237,7 @@ fullmesh_tests()
 		addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 		chk_rm_nr 0 1
 	fi
 
@@ -3228,7 +3250,7 @@ fullmesh_tests()
 		sflags=nobackup,nofullmesh speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 		chk_rm_nr 0 1
 	fi
 }
@@ -3407,7 +3429,7 @@ userspace_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 0
-		chk_prio_nr 0 0
+		chk_prio_nr 0 0 0 0
 	fi
 
 	# userspace pm type prevents rm_addr

[PATCH 6.6 120/121] selftests: mptcp: join: check backup support in signal endp

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit f833470c27832136d4416d8fc55d658082af0989 upstream.

Before the previous commit, 'signal' endpoints with the 'backup' flag
were ignored when sending the MP_JOIN.

The MPTCP Join selftest has then been modified to validate this case:
the "single address, backup" test, is now validating the MP_JOIN with a
backup flag as it is what we expect it to do with such name. The
previous version has been kept, but renamed to "single address, switch
to backup" to avoid confusions.

The "single address with port, backup" test is also now validating the
MPJ with a backup flag, which makes more sense than checking the switch
to backup with an MP_PRIO.

The "mpc backup both sides" test is now validating that the backup flag
is also set in MP_JOIN from and to the addresses used in the initial
subflow, using the special ID 0.

The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.

Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |   34 +++++++++++++++++++-----
 1 file changed, 28 insertions(+), 6 deletions(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -2780,6 +2780,19 @@ backup_tests()
 	if reset "single address, backup" &&
 	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
+		pm_nl_set_limits $ns2 1 1
+		sflags=nobackup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr 1 1 1
+		chk_add_nr 1 1
+		chk_prio_nr 1 0 0 1
+	fi
+
+	# single address, switch to backup
+	if reset "single address, switch to backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
+		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
 		sflags=backup speed=slow \
@@ -2793,13 +2806,13 @@ backup_tests()
 	if reset "single address with port, backup" &&
 	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup port 10100
 		pm_nl_set_limits $ns2 1 1
-		sflags=backup speed=slow \
+		sflags=nobackup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1 0 0
+		chk_prio_nr 1 0 0 1
 	fi
 
 	if reset "mpc backup" &&
@@ -2813,12 +2826,21 @@ backup_tests()
 
 	if reset "mpc backup both sides" &&
 	   continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then
-		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 1 2
+		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal,backup
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
+
+		# 10.0.2.2 (non-backup) -> 10.0.1.1 (backup)
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		# 10.0.1.2 (backup) -> 10.0.2.1 (non-backup)
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		ip -net "$ns2" route add 10.0.2.1 via 10.0.1.1 dev ns2eth1 # force this path
+
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
-		chk_join_nr 0 0 0
-		chk_prio_nr 1 1 0 0
+		chk_join_nr 2 2 2
+		chk_prio_nr 1 1 1 1
 	fi
 
 	if reset "mpc switch to backup" &&

[PATCH 6.6 121/121] mptcp: prevent BPF accessing lowat from a subflow socket.

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit fcf4692fa39e86a590c14a4af2de704e1d20a3b5 upstream.

Alexei reported the following splat:

 WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0
 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)]
 CPU: 32 PID: 3276 Comm: test_progs Tainted: GO       6.8.0-12873-g2c43c33bfd23
 Call Trace:
  <TASK>
  mptcp_set_rcvlowat+0x79/0x1d0
  sk_setsockopt+0x6c0/0x1540
  __bpf_setsockopt+0x6f/0x90
  bpf_sock_ops_setsockopt+0x3c/0x90
  bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b
  bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132
  bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86
  __cgroup_bpf_run_filter_sock_ops+0xbc/0x250
  tcp_connect+0x879/0x1160
  tcp_v6_connect+0x50c/0x870
  mptcp_connect+0x129/0x280
  __inet_stream_connect+0xce/0x370
  inet_stream_connect+0x36/0x50
  bpf_trampoline_6442491565+0x49/0xef
  inet_stream_connect+0x5/0x50
  __sys_connect+0x63/0x90
  __x64_sys_connect+0x14/0x20

The root cause of the issue is that bpf allows accessing mptcp-level
proto_ops from a tcp subflow scope.

Fix the issue detecting the problematic call and preventing any action.

Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/482
Fixes: 5684ab1a0eff ("mptcp: give rcvlowat some love")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/d8cb7d8476d66cb0812a6e29cd1e626869d9d53e.1711738080.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/sockopt.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/net/mptcp/sockopt.c
+++ b/net/mptcp/sockopt.c
@@ -1538,6 +1538,10 @@ int mptcp_set_rcvlowat(struct sock *sk,
 	struct mptcp_subflow_context *subflow;
 	int space, cap;
 
+	/* bpf can land here with a wrong sk type */
+	if (sk->sk_protocol == IPPROTO_TCP)
+		return -EINVAL;
+
 	if (sk->sk_userlocks & SOCK_RCVBUF_LOCK)
 		cap = sk->sk_rcvbuf >> 1;
 	else

Re: [PATCH 6.6 015/121] sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)

[Thomas Weißschuh]

Hi Greg,

On 2024-08-07 16:59:07+0000, Greg Kroah-Hartman wrote:
> 6.6-stable review patch.  If anyone has any objections, please let me know.

I don't think this has any value being backported to any version.

> 
> ------------------
> 
> From: Thomas Weißschuh <linux@weissschuh.net>
> 
> [ Upstream commit 520713a93d550406dae14d49cdb8778d70cecdfd ]
> 
> Remove the 'table' argument from set_ownership as it is never used. This
> change is a step towards putting "struct ctl_table" into .rodata and
> eventually having sysctl core only use "const struct ctl_table".
> 
> The patch was created with the following coccinelle script:
> 
>   @@
>   identifier func, head, table, uid, gid;
>   @@
> 
>   void func(
>     struct ctl_table_header *head,
>   - struct ctl_table *table,
>     kuid_t *uid, kgid_t *gid)
>   { ... }
> 
> No additional occurrences of 'set_ownership' were found after doing a
> tree-wide search.
> 
> Reviewed-by: Joel Granados <j.granados@samsung.com>
> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
> Signed-off-by: Joel Granados <j.granados@samsung.com>
> Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  fs/proc/proc_sysctl.c  | 2 +-
>  include/linux/sysctl.h | 1 -
>  ipc/ipc_sysctl.c       | 3 +--
>  ipc/mq_sysctl.c        | 3 +--
>  net/sysctl_net.c       | 1 -
>  5 files changed, 3 insertions(+), 7 deletions(-)
> 
> diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
> index 5b5cdc747cef3..cec67e6a6678f 100644
> --- a/fs/proc/proc_sysctl.c
> +++ b/fs/proc/proc_sysctl.c
> @@ -481,7 +481,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb,
>  	}
>  
>  	if (root->set_ownership)
> -		root->set_ownership(head, table, &inode->i_uid, &inode->i_gid);
> +		root->set_ownership(head, &inode->i_uid, &inode->i_gid);
>  	else {
>  		inode->i_uid = GLOBAL_ROOT_UID;
>  		inode->i_gid = GLOBAL_ROOT_GID;
> diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
> index 61b40ea81f4d3..698a71422a14b 100644
> --- a/include/linux/sysctl.h
> +++ b/include/linux/sysctl.h
> @@ -205,7 +205,6 @@ struct ctl_table_root {
>  	struct ctl_table_set default_set;
>  	struct ctl_table_set *(*lookup)(struct ctl_table_root *root);
>  	void (*set_ownership)(struct ctl_table_header *head,
> -			      struct ctl_table *table,
>  			      kuid_t *uid, kgid_t *gid);
>  	int (*permissions)(struct ctl_table_header *head, struct ctl_table *table);
>  };
> diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
> index 01c4a50d22b2d..b2f39a86f4734 100644
> --- a/ipc/ipc_sysctl.c
> +++ b/ipc/ipc_sysctl.c
> @@ -192,7 +192,6 @@ static int set_is_seen(struct ctl_table_set *set)
>  }
>  
>  static void ipc_set_ownership(struct ctl_table_header *head,
> -			      struct ctl_table *table,
>  			      kuid_t *uid, kgid_t *gid)
>  {
>  	struct ipc_namespace *ns =
> @@ -224,7 +223,7 @@ static int ipc_permissions(struct ctl_table_header *head, struct ctl_table *tabl
>  		kuid_t ns_root_uid;
>  		kgid_t ns_root_gid;
>  
> -		ipc_set_ownership(head, table, &ns_root_uid, &ns_root_gid);
> +		ipc_set_ownership(head, &ns_root_uid, &ns_root_gid);
>  
>  		if (uid_eq(current_euid(), ns_root_uid))
>  			mode >>= 6;
> diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
> index 21fba3a6edaf7..6bb1c5397c69b 100644
> --- a/ipc/mq_sysctl.c
> +++ b/ipc/mq_sysctl.c
> @@ -78,7 +78,6 @@ static int set_is_seen(struct ctl_table_set *set)
>  }
>  
>  static void mq_set_ownership(struct ctl_table_header *head,
> -			     struct ctl_table *table,
>  			     kuid_t *uid, kgid_t *gid)
>  {
>  	struct ipc_namespace *ns =
> @@ -97,7 +96,7 @@ static int mq_permissions(struct ctl_table_header *head, struct ctl_table *table
>  	kuid_t ns_root_uid;
>  	kgid_t ns_root_gid;
>  
> -	mq_set_ownership(head, table, &ns_root_uid, &ns_root_gid);
> +	mq_set_ownership(head, &ns_root_uid, &ns_root_gid);
>  
>  	if (uid_eq(current_euid(), ns_root_uid))
>  		mode >>= 6;
> diff --git a/net/sysctl_net.c b/net/sysctl_net.c
> index 051ed5f6fc937..a0a7a79991f9f 100644
> --- a/net/sysctl_net.c
> +++ b/net/sysctl_net.c
> @@ -54,7 +54,6 @@ static int net_ctl_permissions(struct ctl_table_header *head,
>  }
>  
>  static void net_ctl_set_ownership(struct ctl_table_header *head,
> -				  struct ctl_table *table,
>  				  kuid_t *uid, kgid_t *gid)
>  {
>  	struct net *net = container_of(head->set, struct net, sysctls);
> -- 
> 2.43.0
> 
> 
> 

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Florian Fainelli]

On 8/7/24 07:58, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENEIRC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Shuah Khan]

On 8/7/24 08:58, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.6 011/121] thermal: bcm2835: Convert to platform remove callback returning void

[Uwe Kleine-König]

[-- Attachment #1: Type: text/plain, Size: 2884 bytes --]

Hello Greg,

On Wed, Aug 07, 2024 at 04:59:03PM +0200, Greg Kroah-Hartman wrote:
> 6.6-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> 
> [ Upstream commit f29ecd3748a28d0b52512afc81b3c13fd4a00c9b ]
> 
> The .remove() callback for a platform driver returns an int which makes
> many driver authors wrongly assume it's possible to do error handling by
> returning an error code. However the value returned is ignored (apart
> from emitting a warning) and this typically results in resource leaks.
> 
> To improve here there is a quest to make the remove callback return
> void. In the first step of this quest all drivers are converted to
> .remove_new(), which already returns void. Eventually after all drivers
> are converted, .remove_new() will be renamed to .remove().
> 
> Trivially convert this driver from always returning zero in the remove
> callback to the void returning variant.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Stable-dep-of: e90c369cc2ff ("thermal/drivers/broadcom: Fix race between removal and clock disable")
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/thermal/broadcom/bcm2835_thermal.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
> index 3acc9288b3105..5c1cebe075801 100644
> --- a/drivers/thermal/broadcom/bcm2835_thermal.c
> +++ b/drivers/thermal/broadcom/bcm2835_thermal.c
> @@ -282,19 +282,17 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
>  	return err;
>  }
>  
> -static int bcm2835_thermal_remove(struct platform_device *pdev)
> +static void bcm2835_thermal_remove(struct platform_device *pdev)
>  {
>  	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
>  
>  	debugfs_remove_recursive(data->debugfsdir);
>  	clk_disable_unprepare(data->clk);
> -
> -	return 0;
>  }
>  
>  static struct platform_driver bcm2835_thermal_driver = {
>  	.probe = bcm2835_thermal_probe,
> -	.remove = bcm2835_thermal_remove,
> +	.remove_new = bcm2835_thermal_remove,
>  	.driver = {
>  		.name = "bcm2835_thermal",
>  		.of_match_table = bcm2835_thermal_of_match_table,

While I'm confident this patch not to break anything (there are so many
of this type in mainline now and none regressed), it should be also easy
to port the follow up patches onto 6.6.x without this change.

No strong opinion and maybe being able to cleanly cherry pick later
changes is important enough to keep this conversion? Otherwise I'd tend
to drop this patch.

Best regards
Uwe


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Anders Roxell]

On Wed, 7 Aug 2024 at 17:07, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.6.45-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 272b28faf61f0b80e9d6f92cbcfa32817f9ece7b
* git describe: v6.6.44-122-g272b28faf61f
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.44-122-g272b28faf61f

## Test Regressions (compared to v6.6.43-569-g7d0be44d622f)

## Metric Regressions (compared to v6.6.43-569-g7d0be44d622f)

## Test Fixes (compared to v6.6.43-569-g7d0be44d622f)

## Metric Fixes (compared to v6.6.43-569-g7d0be44d622f)

## Test result summary
total: 238058, pass: 205175, fail: 4074, skip: 28347, xfail: 462

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 127 total, 127 passed, 0 failed
* arm64: 36 total, 36 passed, 0 failed
* i386: 27 total, 27 passed, 0 failed
* mips: 24 total, 24 passed, 0 failed
* parisc: 3 total, 3 passed, 0 failed
* powerpc: 34 total, 34 passed, 0 failed
* riscv: 17 total, 17 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 31 total, 31 passed, 0 failed

## Test suites summary
* boot
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-smoketest
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Miguel Ojeda]

On Wed, 07 Aug 2024 16:58:52 +0200 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.

Boot-tested under QEMU for Rust x86_64:

Tested-by: Miguel Ojeda <ojeda@kernel.org>

Thanks!

Cheers,
Miguel

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Takeshi Ogasawara]

Hi Greg

On Thu, Aug 8, 2024 at 12:07 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

6.6.45-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

[    0.000000] Linux version 6.6.45-rc1rv
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 14.2.1 20240805, GNU ld (GNU
Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Thu Aug  8 20:02:46 JST 2024

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Allen]

> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Compiled and booted on my x86_64 and ARM64 test systems. No errors or
regressions.

Tested-by: Allen Pais <apais@linux.microsoft.com>

Thanks.

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Peter Schneider]

Am 07.08.2024 um 16:58 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg 
oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>

Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Jon Hunter]

On Wed, 07 Aug 2024 16:58:52 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.45 release.
> There are 121 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.6:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version:	6.6.45-rc1-g272b28faf61f
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.6 000/121] 6.6.45-rc1 review

[Shreeya Patel]

 ---- On Wed, 07 Aug 2024 20:28:52 +0530  Greg Kroah-Hartman  wrote --- 
 > This is the start of the stable review cycle for the 6.6.45 release.
 > There are 121 patches in this series, all will be posted as a response
 > to this one.  If anyone has any issues with these being applied, please
 > let me know.
 > 
 > Responses should be made by Fri, 09 Aug 2024 14:59:53 +0000.
 > Anything received after that time might be too late.
 > 
 > The whole patch series can be found in one patch at:
 >     https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.45-rc1.gz
 > or in the git tree and branch at:
 >     git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
 > and the diffstat can be found below.
 > 
 > thanks,
 > 

KernelCI report for stable-rc/linux-6.6.y for this week :-

Date: 2024-08-07

## Build failures:
No **new** boot failures seen for the stable-rc/linux-6.6.y commit head \o/

## Boot failures:
No **new** boot failures seen for the stable-rc/linux-6.6.y commit head \o/

Tested-by: kernelci.org bot <bot@kernelci.org>

Thanks,
Shreeya Patel

Re: [PATCH 6.6 015/121] sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)

[Greg Kroah-Hartman]

On Wed, Aug 07, 2024 at 06:38:13PM +0200, Thomas Weißschuh wrote:
> Hi Greg,
> 
> On 2024-08-07 16:59:07+0000, Greg Kroah-Hartman wrote:
> > 6.6-stable review patch.  If anyone has any objections, please let me know.
> 
> I don't think this has any value being backported to any version.

Did you miss this line:

> > Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")

thanks,

greg k-h

Re: [PATCH 6.6 011/121] thermal: bcm2835: Convert to platform remove callback returning void

[Greg Kroah-Hartman]

On Thu, Aug 08, 2024 at 08:11:04AM +0200, Uwe Kleine-König wrote:
> Hello Greg,
> 
> On Wed, Aug 07, 2024 at 04:59:03PM +0200, Greg Kroah-Hartman wrote:
> > 6.6-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > 
> > [ Upstream commit f29ecd3748a28d0b52512afc81b3c13fd4a00c9b ]
> > 
> > The .remove() callback for a platform driver returns an int which makes
> > many driver authors wrongly assume it's possible to do error handling by
> > returning an error code. However the value returned is ignored (apart
> > from emitting a warning) and this typically results in resource leaks.
> > 
> > To improve here there is a quest to make the remove callback return
> > void. In the first step of this quest all drivers are converted to
> > .remove_new(), which already returns void. Eventually after all drivers
> > are converted, .remove_new() will be renamed to .remove().
> > 
> > Trivially convert this driver from always returning zero in the remove
> > callback to the void returning variant.
> > 
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > Stable-dep-of: e90c369cc2ff ("thermal/drivers/broadcom: Fix race between removal and clock disable")
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> >  drivers/thermal/broadcom/bcm2835_thermal.c | 6 ++----
> >  1 file changed, 2 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
> > index 3acc9288b3105..5c1cebe075801 100644
> > --- a/drivers/thermal/broadcom/bcm2835_thermal.c
> > +++ b/drivers/thermal/broadcom/bcm2835_thermal.c
> > @@ -282,19 +282,17 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
> >  	return err;
> >  }
> >  
> > -static int bcm2835_thermal_remove(struct platform_device *pdev)
> > +static void bcm2835_thermal_remove(struct platform_device *pdev)
> >  {
> >  	struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);
> >  
> >  	debugfs_remove_recursive(data->debugfsdir);
> >  	clk_disable_unprepare(data->clk);
> > -
> > -	return 0;
> >  }
> >  
> >  static struct platform_driver bcm2835_thermal_driver = {
> >  	.probe = bcm2835_thermal_probe,
> > -	.remove = bcm2835_thermal_remove,
> > +	.remove_new = bcm2835_thermal_remove,
> >  	.driver = {
> >  		.name = "bcm2835_thermal",
> >  		.of_match_table = bcm2835_thermal_of_match_table,
> 
> While I'm confident this patch not to break anything (there are so many
> of this type in mainline now and none regressed), it should be also easy
> to port the follow up patches onto 6.6.x without this change.
> 
> No strong opinion and maybe being able to cleanly cherry pick later
> changes is important enough to keep this conversion? Otherwise I'd tend
> to drop this patch.

Thanks for the review, I'll leave it in as it made it simpler for the
next commit.

thanks,

greg k-h

Re: [PATCH 6.6 015/121] sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)

[Thomas Weißschuh]

Hi Greg,

Aug 11, 2024 12:45:38 Greg Kroah-Hartman <gregkh@linuxfoundation.org>:

> On Wed, Aug 07, 2024 at 06:38:13PM +0200, Thomas Weißschuh wrote:
>> Hi Greg,
>>
>> On 2024-08-07 16:59:07+0000, Greg Kroah-Hartman wrote:
>>> 6.6-stable review patch.  If anyone has any objections, please let me know.
>>
>> I don't think this has any value being backported to any version.
>
> Did you miss this line:
>
>>> Stable-dep-of: 98ca62ba9e2b ("sysctl: always initialize i_uid/i_gid")

I did. Thanks and sorry for the noise.

FWIW it should be trivial to break the dependency,
but it's probably not worth to complicate it.

Thomas