[PATCH 6.6 00/91] 6.6.52-rc1 review

[PATCH 6.6 00/91] 6.6.52-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.6.52 release.
There are 91 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.6.52-rc1

William Qiu <william.qiu@starfivetech.com>
    riscv: dts: starfive: add assigned-clock* to limit frquency

Arseniy Krasnov <avkrasnov@salutedevices.com>
    ASoC: meson: axg-card: fix 'use-after-free'

Mika Westerberg <mika.westerberg@linux.intel.com>
    pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID

David Howells <dhowells@redhat.com>
    cifs: Fix signature miscalculation

Su Hui <suhui@nfschina.com>
    ASoC: codecs: avoid possible garbage value in peb2466_reg_read()

Nikita Zhandarovich <n.zhandarovich@fintech.ru>
    drm/i915/guc: prevent a possible int overflow in wq offsets

Jinjie Ruan <ruanjinjie@huawei.com>
    spi: geni-qcom: Fix incorrect free_irq() sequence

Jinjie Ruan <ruanjinjie@huawei.com>
    spi: geni-qcom: Undo runtime PM changes at driver exit time

David (Ming Qiang) Wu <David.Wu3@amd.com>
    drm/amd/amdgpu: apply command submission parser for JPEG v1

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/atomfirmware: Silence UBSAN warning

Ben Skeggs <bskeggs@nvidia.com>
    drm/nouveau/fb: restore init() for ramgp102

T.J. Mercier <tjmercier@google.com>
    dma-buf: heaps: Fix off-by-one in CMA heap fault handler

T.J. Mercier <tjmercier@google.com>
    drm/syncobj: Fix syncobj leak in drm_syncobj_eventfd_ioctl

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps"

Han Xu <han.xu@nxp.com>
    spi: nxp-fspi: fix the KASAN report out-of-bounds bug

Steven Rostedt <rostedt@goodmis.org>
    tracing/osnoise: Fix build when timerlat is not enabled

Sean Anderson <sean.anderson@linux.dev>
    net: dpaa: Pad packets to ETH_ZLEN

Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
    net: dsa: felix: ignore pending status of TAS module when it's disabled

Florian Westphal <fw@strlen.de>
    netfilter: nft_socket: make cgroupsv2 matching work with namespaces

Florian Westphal <fw@strlen.de>
    netfilter: nft_socket: fix sk refcount leaks

Sean Anderson <sean.anderson@linux.dev>
    selftests: net: csum: Fix checksums for packets with non-zero padding

Jacky Chou <jacky_chou@aspeedtech.com>
    net: ftgmac100: Enable TX interrupt to avoid TX timeout

Naveen Mamindlapalli <naveenm@marvell.com>
    octeontx2-af: Modify SMQ flush sequence to drop packets

Muhammad Usama Anjum <usama.anjum@collabora.com>
    fou: fix initialization of grc

Benjamin Poirier <bpoirier@nvidia.com>
    net/mlx5: Fix bridge mode operations when there are no VFs

Carolina Jubran <cjubran@nvidia.com>
    net/mlx5: Verify support for scheduling element and TSAR type

Cosmin Ratiu <cratiu@nvidia.com>
    net/mlx5: Correct TASR typo into TSAR

Carolina Jubran <cjubran@nvidia.com>
    net/mlx5: Add missing masks and QoS bit masks for scheduling elements

Carolina Jubran <cjubran@nvidia.com>
    net/mlx5: Explicitly set scheduling element and TSAR type

Shahar Shitrit <shshitrit@nvidia.com>
    net/mlx5e: Add missing link mode to ptys2ext_ethtool_map

Patrisious Haddad <phaddad@nvidia.com>
    IB/mlx5: Rename 400G_8X speed to comply to naming convention

Shahar Shitrit <shshitrit@nvidia.com>
    net/mlx5e: Add missing link modes to ptys2ethtool_map

Maher Sanalla <msanalla@nvidia.com>
    net/mlx5: Update the list of the PCI supported devices

Sriram Yagnaraman <sriram.yagnaraman@est.tech>
    igb: Always call igb_xdp_ring_update_tail() under Tx lock

Michal Schmidt <mschmidt@redhat.com>
    ice: fix VSI lists confusion when adding VLANs

Jacob Keller <jacob.e.keller@intel.com>
    ice: fix accounting for filters shared by multiple VSIs

Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
    ice: Fix lldp packets dropping after changing the number of channels

Patryk Biel <pbiel7@gmail.com>
    hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2

Michal Luczaj <mhal@rbox.co>
    selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()

peng guo <engguopeng@buaa.edu.cn>
    cxl/core: Fix incorrect vendor debug UUID define

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    eeprom: digsy_mtc: Fix 93xx46 driver probe failure

Ilya Bakoulin <ilya.bakoulin@amd.com>
    drm/amd/display: Fix FEC_READY write on DP LT

Cruise <cruise.hung@amd.com>
    drm/amd/display: Disable error correction if it's not supported

FUKAUMI Naoki <naoki@radxa.com>
    arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E

Sean Anderson <sean.anderson@linux.dev>
    net: xilinx: axienet: Fix race in axienet_stop

Linus Torvalds <torvalds@linux-foundation.org>
    mm: avoid leaving partial pfn mappings around in error case

Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
    x86/hyperv: fix kexec crash due to VP assist page corruption

Mikulas Patocka <mpatocka@redhat.com>
    dm-integrity: fix a race condition when accessing recalc_sector

Willem de Bruijn <willemb@google.com>
    net: tighten bad gso csum offset check in virtio_net_hdr

Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
    minmax: reduce min/max macro expansion in atomisp driver

Quentin Schulz <quentin.schulz@cherry.de>
    arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma

Quentin Schulz <quentin.schulz@cherry.de>
    arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    selftests: mptcp: join: restrict fullmesh endp on 1st sf

Edward Adam Davis <eadavis@qq.com>
    mptcp: pm: Fix uaf in __timer_delete_sync

Hans de Goede <hdegoede@redhat.com>
    platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array

Hans de Goede <hdegoede@redhat.com>
    platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Avoid unnecessary rescanning of the per-server delegation list

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Fix clearing of layout segments in layoutreturn

ChenXiaoSong <chenxiaosong@kylinos.cn>
    smb/server: fix return value of smb2_open()

Alexander Gordeev <agordeev@linux.ibm.com>
    s390/mm: Prevent lowcore vs identity mapping overlap

Takashi Iwai <tiwai@suse.de>
    Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table

Rob Clark <robdclark@chromium.org>
    drm/msm/adreno: Fix error return if missing firmware-name

Maximilian Luz <luzmaximilian@gmail.com>
    platform/surface: aggregator_registry: Add support for Surface Laptop Go 3

Maximilian Luz <luzmaximilian@gmail.com>
    platform/surface: aggregator_registry: Add Support for Surface Pro 10

Anders Roxell <anders.roxell@linaro.org>
    scripts: kconfig: merge_config: config files: add a trailing newline

Dmitry Savin <envelsavinds@gmail.com>
    HID: multitouch: Add support for GT7868Q

Jonathan Denose <jdenose@google.com>
    Input: synaptics - enable SMBus for HP Elitebook 840 G2

Marek Vasut <marex@denx.de>
    Input: ads7846 - ratelimit the spi_sync error message

Jeff Layton <jlayton@kernel.org>
    btrfs: update target inode's ctime on unlink

Peiyang Wang <wangpeiyang1@huawei.com>
    net: hns3: use correct release function during uninitialization

Bert Karwatzki <spasswolf@web.de>
    wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change

Christophe Leroy <christophe.leroy@csgroup.eu>
    powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL

Pawel Dembicki <paweldembicki@gmail.com>
    net: phy: vitesse: repair vsc73xx autonegotiation

Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
    drm: panel-orientation-quirks: Add quirk for Ayn Loki Max

Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
    drm: panel-orientation-quirks: Add quirk for Ayn Loki Zero

Moon Yeounsu <yyyynoom@gmail.com>
    net: ethernet: use ip_hdrlen() instead of bit shift

Foster Snowhill <forst@pen.gy>
    usbnet: ipheth: fix carrier detection in modes 1 and 4

Foster Snowhill <forst@pen.gy>
    usbnet: ipheth: do not stop RX on failing RX callback

Foster Snowhill <forst@pen.gy>
    usbnet: ipheth: drop RX URBs with no payload

Foster Snowhill <forst@pen.gy>
    usbnet: ipheth: remove extraneous rx URB length check

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: override fsids for smb2_query_info()

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: override fsids for share path check

John Thomson <git@johnthomson.fastmail.com.au>
    nvmem: u-boot-env: error if NVMEM device is too small

Rafał Miłecki <rafal@milecki.pl>
    nvmem: u-boot-env: improve coding style

Rafał Miłecki <rafal@milecki.pl>
    nvmem: u-boot-env: use nvmem device helpers

Rafał Miłecki <rafal@milecki.pl>
    nvmem: u-boot-env: use nvmem_add_one_cell() nvmem subsystem helper

Rafał Miłecki <rafal@milecki.pl>
    nvmem: core: add nvmem_dev_size() helper

Dumitru Ceclan <mitrutzceclan@gmail.com>
    iio: adc: ad7124: fix DT configuration parsing

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    iio: adc: ad7124: Switch from of specific to fwnode based property handling

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    device property: Introduce device_for_each_child_node_scoped()

Jonathan Cameron <Jonathan.Cameron@huawei.com>
    device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts  |  2 +-
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi      | 36 ++++++++-
 arch/powerpc/kernel/setup-common.c                 |  1 +
 arch/powerpc/mm/mem.c                              |  2 -
 .../dts/starfive/jh7110-starfive-visionfive-2.dtsi |  4 +
 arch/s390/kernel/setup.c                           | 19 ++++-
 arch/x86/hyperv/hv_init.c                          |  5 +-
 arch/x86/include/asm/mshyperv.h                    |  1 -
 arch/x86/kernel/cpu/mshyperv.c                     |  4 +-
 drivers/cxl/cxlmem.h                               |  2 +-
 drivers/dma-buf/heaps/cma_heap.c                   |  2 +-
 drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c             | 76 +++++++++++++++++-
 drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.h             | 11 +++
 .../amd/display/dc/link/protocols/link_dp_phy.c    | 53 ++++++-------
 drivers/gpu/drm/amd/include/atomfirmware.h         |  4 +-
 drivers/gpu/drm/drm_panel_orientation_quirks.c     | 12 +++
 drivers/gpu/drm/drm_syncobj.c                      | 17 +++-
 drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c  |  4 +-
 drivers/gpu/drm/msm/adreno/adreno_gpu.c            |  2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/ram.h       |  2 +
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp100.c  |  2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp102.c  |  1 +
 drivers/hid/hid-ids.h                              |  2 +
 drivers/hid/hid-multitouch.c                       | 33 ++++++++
 drivers/hwmon/pmbus/pmbus.h                        |  6 ++
 drivers/hwmon/pmbus/pmbus_core.c                   | 17 +++-
 drivers/iio/adc/ad7124.c                           | 58 ++++++--------
 drivers/infiniband/hw/mlx5/main.c                  |  2 +-
 drivers/input/mouse/synaptics.c                    |  1 +
 drivers/input/serio/i8042-acpipnpio.h              |  9 +++
 drivers/input/touchscreen/ads7846.c                |  2 +-
 drivers/md/dm-integrity.c                          |  4 +-
 drivers/misc/eeprom/digsy_mtc_eeprom.c             |  2 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c             | 11 ++-
 drivers/net/ethernet/faraday/ftgmac100.h           |  2 +-
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     |  9 ++-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    |  2 +-
 drivers/net/ethernet/intel/ice/ice_lib.c           | 15 ++--
 drivers/net/ethernet/intel/ice/ice_switch.c        |  4 +-
 drivers/net/ethernet/intel/igb/igb_main.c          | 17 +++-
 drivers/net/ethernet/jme.c                         | 10 +--
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  3 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    | 59 +++++++++++---
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   | 10 +++
 .../net/ethernet/mellanox/mlx5/core/esw/legacy.c   |  4 +-
 drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c  | 51 +++++++-----
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/port.c     |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/qos.c      |  7 ++
 drivers/net/ethernet/xilinx/xilinx_axienet.h       |  3 +
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c  |  8 ++
 drivers/net/phy/vitesse.c                          | 14 ----
 drivers/net/usb/ipheth.c                           | 18 +++--
 drivers/net/wireless/mediatek/mt76/mt7921/main.c   |  2 +-
 drivers/nvmem/core.c                               | 13 ++++
 drivers/nvmem/u-boot-env.c                         | 91 +++++++++++-----------
 drivers/pinctrl/intel/pinctrl-meteorlake.c         |  1 +
 .../platform/surface/surface_aggregator_registry.c |  8 +-
 drivers/platform/x86/panasonic-laptop.c            | 58 +++++++++++---
 drivers/soundwire/stream.c                         |  8 +-
 drivers/spi/spi-geni-qcom.c                        | 17 ++--
 drivers/spi/spi-nxp-fspi.c                         |  5 +-
 drivers/staging/media/atomisp/pci/sh_css_frac.h    | 26 +++++--
 fs/btrfs/inode.c                                   |  1 +
 fs/nfs/delegation.c                                | 15 ++--
 fs/nfs/nfs4proc.c                                  |  9 ++-
 fs/nfs/pnfs.c                                      |  5 +-
 fs/smb/client/cifsencrypt.c                        |  2 +-
 fs/smb/server/mgmt/share_config.c                  | 15 +++-
 fs/smb/server/mgmt/share_config.h                  |  4 +-
 fs/smb/server/mgmt/tree_connect.c                  |  9 ++-
 fs/smb/server/mgmt/tree_connect.h                  |  4 +-
 fs/smb/server/smb2pdu.c                            | 11 ++-
 fs/smb/server/smb_common.c                         |  9 ++-
 fs/smb/server/smb_common.h                         |  2 +
 include/linux/mlx5/mlx5_ifc.h                      | 12 ++-
 include/linux/mlx5/port.h                          |  2 +-
 include/linux/nvmem-consumer.h                     |  1 +
 include/linux/property.h                           |  8 ++
 include/linux/virtio_net.h                         |  3 +-
 kernel/trace/trace_osnoise.c                       | 10 +--
 mm/memory.c                                        | 27 +++++--
 net/ipv4/fou_core.c                                |  4 +-
 net/mptcp/pm_netlink.c                             | 13 +++-
 net/netfilter/nft_socket.c                         | 48 ++++++++++--
 scripts/kconfig/merge_config.sh                    |  2 +
 sound/soc/codecs/peb2466.c                         |  3 +-
 sound/soc/meson/axg-card.c                         |  3 +-
 .../selftests/bpf/prog_tests/sockmap_listen.c      |  3 +-
 tools/testing/selftests/net/csum.c                 | 16 +++-
 tools/testing/selftests/net/mptcp/mptcp_join.sh    |  4 +-
 92 files changed, 797 insertions(+), 329 deletions(-)

[PATCH 6.6 01/91] device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 59ed5e2d505bf5f9b4af64d0021cd0c96aec1f7c ]

Useful where the fwnode_handle was obtained from a call such as
fwnode_find_reference() as it will safely do nothing if IS_ERR() is true
and will automatically release the reference on the variable leaving
scope.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368dd ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/property.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/linux/property.h b/include/linux/property.h
index 1684fca930f7..909416c701b8 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -11,6 +11,7 @@
 #define _LINUX_PROPERTY_H_
 
 #include <linux/bits.h>
+#include <linux/cleanup.h>
 #include <linux/fwnode.h>
 #include <linux/stddef.h>
 #include <linux/types.h>
@@ -175,6 +176,8 @@ struct fwnode_handle *device_get_named_child_node(const struct device *dev,
 struct fwnode_handle *fwnode_handle_get(struct fwnode_handle *fwnode);
 void fwnode_handle_put(struct fwnode_handle *fwnode);
 
+DEFINE_FREE(fwnode_handle, struct fwnode_handle *, fwnode_handle_put(_T))
+
 int fwnode_irq_get(const struct fwnode_handle *fwnode, unsigned int index);
 int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name);
 
-- 
2.43.0

[PATCH 6.6 02/91] device property: Introduce device_for_each_child_node_scoped()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 365130fd47af6d4317aa16a407874b699ab8d8cb ]

Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.

The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits.  If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240217164249.921878-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368dd ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/property.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/linux/property.h b/include/linux/property.h
index 909416c701b8..d32b8052e086 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -168,6 +168,11 @@ struct fwnode_handle *device_get_next_child_node(const struct device *dev,
 	for (child = device_get_next_child_node(dev, NULL); child;	\
 	     child = device_get_next_child_node(dev, child))
 
+#define device_for_each_child_node_scoped(dev, child)			\
+	for (struct fwnode_handle *child __free(fwnode_handle) =	\
+		device_get_next_child_node(dev, NULL);			\
+	     child; child = device_get_next_child_node(dev, child))
+
 struct fwnode_handle *fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
 						  const char *childname);
 struct fwnode_handle *device_get_named_child_node(const struct device *dev,
-- 
2.43.0

[PATCH 6.6 03/91] iio: adc: ad7124: Switch from of specific to fwnode based property handling

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit a6eaf02b82744b424b9b2c74847282deb2c6f77b ]

Using the generic firmware data access functions from property.h
provides a number of advantages:
 1) Works with different firmware types.
 2) Doesn't provide a 'bad' example for new IIO drivers.
 3) Lets us use the new _scoped() loops with automatic reference count
    cleanup for fwnode_handle

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240218172731.1023367-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 61cbfb5368dd ("iio: adc: ad7124: fix DT configuration parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ad7124.c | 55 +++++++++++++++++-----------------------
 1 file changed, 23 insertions(+), 32 deletions(-)

diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 2976c62b58c0..bd323c6bd756 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -14,7 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/kfifo.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
@@ -812,22 +813,19 @@ static int ad7124_check_chip_id(struct ad7124_state *st)
 	return 0;
 }
 
-static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
-					  struct device_node *np)
+static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
+				       struct device *dev)
 {
 	struct ad7124_state *st = iio_priv(indio_dev);
 	struct ad7124_channel_config *cfg;
 	struct ad7124_channel *channels;
-	struct device_node *child;
 	struct iio_chan_spec *chan;
 	unsigned int ain[2], channel = 0, tmp;
 	int ret;
 
-	st->num_channels = of_get_available_child_count(np);
-	if (!st->num_channels) {
-		dev_err(indio_dev->dev.parent, "no channel children\n");
-		return -ENODEV;
-	}
+	st->num_channels = device_get_child_node_count(dev);
+	if (!st->num_channels)
+		return dev_err_probe(dev, -ENODEV, "no channel children\n");
 
 	chan = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
 			    sizeof(*chan), GFP_KERNEL);
@@ -843,39 +841,38 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 	indio_dev->num_channels = st->num_channels;
 	st->channels = channels;
 
-	for_each_available_child_of_node(np, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		cfg = &st->channels[channel].cfg;
 
-		ret = of_property_read_u32(child, "reg", &channel);
+		ret = fwnode_property_read_u32(child, "reg", &channel);
 		if (ret)
-			goto err;
+			return ret;
 
-		if (channel >= indio_dev->num_channels) {
-			dev_err(indio_dev->dev.parent,
+		if (channel >= indio_dev->num_channels)
+			return dev_err_probe(dev, -EINVAL,
 				"Channel index >= number of channels\n");
-			ret = -EINVAL;
-			goto err;
-		}
 
-		ret = of_property_read_u32_array(child, "diff-channels",
-						 ain, 2);
+		ret = fwnode_property_read_u32_array(child, "diff-channels",
+						     ain, 2);
 		if (ret)
-			goto err;
+			return ret;
 
 		st->channels[channel].nr = channel;
 		st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
 						  AD7124_CHANNEL_AINM(ain[1]);
 
-		cfg->bipolar = of_property_read_bool(child, "bipolar");
+		cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
 
-		ret = of_property_read_u32(child, "adi,reference-select", &tmp);
+		ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp);
 		if (ret)
 			cfg->refsel = AD7124_INT_REF;
 		else
 			cfg->refsel = tmp;
 
-		cfg->buf_positive = of_property_read_bool(child, "adi,buffered-positive");
-		cfg->buf_negative = of_property_read_bool(child, "adi,buffered-negative");
+		cfg->buf_positive =
+			fwnode_property_read_bool(child, "adi,buffered-positive");
+		cfg->buf_negative =
+			fwnode_property_read_bool(child, "adi,buffered-negative");
 
 		chan[channel] = ad7124_channel_template;
 		chan[channel].address = channel;
@@ -885,10 +882,6 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 	}
 
 	return 0;
-err:
-	of_node_put(child);
-
-	return ret;
 }
 
 static int ad7124_setup(struct ad7124_state *st)
@@ -948,9 +941,7 @@ static int ad7124_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int i, ret;
 
-	info = of_device_get_match_data(&spi->dev);
-	if (!info)
-		info = (void *)spi_get_device_id(spi)->driver_data;
+	info = spi_get_device_match_data(spi);
 	if (!info)
 		return -ENODEV;
 
@@ -970,7 +961,7 @@ static int ad7124_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = ad7124_of_parse_channel_config(indio_dev, spi->dev.of_node);
+	ret = ad7124_parse_channel_config(indio_dev, &spi->dev);
 	if (ret < 0)
 		return ret;
 
-- 
2.43.0

[PATCH 6.6 04/91] iio: adc: ad7124: fix DT configuration parsing

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dumitru Ceclan <mitrutzceclan@gmail.com>

[ Upstream commit 61cbfb5368dd50ed0d65ce21d305aa923581db2b ]

The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.

Fix by moving the cfg pointer setting after reading the channel number.

Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ad7124.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index bd323c6bd756..d2fe0269b6d3 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -842,8 +842,6 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
 	st->channels = channels;
 
 	device_for_each_child_node_scoped(dev, child) {
-		cfg = &st->channels[channel].cfg;
-
 		ret = fwnode_property_read_u32(child, "reg", &channel);
 		if (ret)
 			return ret;
@@ -861,6 +859,7 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
 		st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
 						  AD7124_CHANNEL_AINM(ain[1]);
 
+		cfg = &st->channels[channel].cfg;
 		cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
 
 		ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp);
-- 
2.43.0

[PATCH 6.6 05/91] nvmem: core: add nvmem_dev_size() helper

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 33cf42e68efc8ff529a7eee08a4f0ba8c8d0a207 ]

This is required by layouts that need to read whole NVMEM content. It's
especially useful for NVMEM devices without hardcoded layout (like
U-Boot environment data block).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1eb ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/core.c           | 13 +++++++++++++
 include/linux/nvmem-consumer.h |  1 +
 2 files changed, 14 insertions(+)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index e7fd1315d7ed..f28c005c2bb2 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -2131,6 +2131,19 @@ const char *nvmem_dev_name(struct nvmem_device *nvmem)
 }
 EXPORT_SYMBOL_GPL(nvmem_dev_name);
 
+/**
+ * nvmem_dev_size() - Get the size of a given nvmem device.
+ *
+ * @nvmem: nvmem device.
+ *
+ * Return: size of the nvmem device.
+ */
+size_t nvmem_dev_size(struct nvmem_device *nvmem)
+{
+	return nvmem->size;
+}
+EXPORT_SYMBOL_GPL(nvmem_dev_size);
+
 static int __init nvmem_init(void)
 {
 	return bus_register(&nvmem_bus_type);
diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h
index 4523e4e83319..526025561df1 100644
--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -81,6 +81,7 @@ int nvmem_device_cell_write(struct nvmem_device *nvmem,
 			    struct nvmem_cell_info *info, void *buf);
 
 const char *nvmem_dev_name(struct nvmem_device *nvmem);
+size_t nvmem_dev_size(struct nvmem_device *nvmem);
 
 void nvmem_add_cell_lookups(struct nvmem_cell_lookup *entries,
 			    size_t nentries);
-- 
2.43.0

[PATCH 6.6 06/91] nvmem: u-boot-env: use nvmem_add_one_cell() nvmem subsystem helper

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 7c8979b42b1a9c5604f431ba804928e55919263c ]

Simplify adding NVMEM cells.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-3-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1eb ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/u-boot-env.c | 55 +++++++++++++++-----------------------
 1 file changed, 21 insertions(+), 34 deletions(-)

diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index c4ae94af4af7..dd9d0ad22712 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -23,13 +23,10 @@ enum u_boot_env_format {
 
 struct u_boot_env {
 	struct device *dev;
+	struct nvmem_device *nvmem;
 	enum u_boot_env_format format;
 
 	struct mtd_info *mtd;
-
-	/* Cells */
-	struct nvmem_cell_info *cells;
-	int ncells;
 };
 
 struct u_boot_env_image_single {
@@ -94,43 +91,36 @@ static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, i
 static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
 				size_t data_offset, size_t data_len)
 {
+	struct nvmem_device *nvmem = priv->nvmem;
 	struct device *dev = priv->dev;
 	char *data = buf + data_offset;
 	char *var, *value, *eq;
-	int idx;
-
-	priv->ncells = 0;
-	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
-		priv->ncells++;
-
-	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
-	if (!priv->cells)
-		return -ENOMEM;
 
-	for (var = data, idx = 0;
+	for (var = data;
 	     var < data + data_len && *var;
-	     var = value + strlen(value) + 1, idx++) {
+	     var = value + strlen(value) + 1) {
+		struct nvmem_cell_info info = {};
+
 		eq = strchr(var, '=');
 		if (!eq)
 			break;
 		*eq = '\0';
 		value = eq + 1;
 
-		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
-		if (!priv->cells[idx].name)
+		info.name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!info.name)
 			return -ENOMEM;
-		priv->cells[idx].offset = data_offset + value - data;
-		priv->cells[idx].bytes = strlen(value);
-		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+		info.offset = data_offset + value - data;
+		info.bytes = strlen(value);
+		info.np = of_get_child_by_name(dev->of_node, info.name);
 		if (!strcmp(var, "ethaddr")) {
-			priv->cells[idx].raw_len = strlen(value);
-			priv->cells[idx].bytes = ETH_ALEN;
-			priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr;
+			info.raw_len = strlen(value);
+			info.bytes = ETH_ALEN;
+			info.read_post_process = u_boot_env_read_post_process_ethaddr;
 		}
-	}
 
-	if (WARN_ON(idx != priv->ncells))
-		priv->ncells = idx;
+		nvmem_add_one_cell(nvmem, &info);
+	}
 
 	return 0;
 }
@@ -209,7 +199,6 @@ static int u_boot_env_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct u_boot_env *priv;
-	int err;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -224,17 +213,15 @@ static int u_boot_env_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->mtd);
 	}
 
-	err = u_boot_env_parse(priv);
-	if (err)
-		return err;
-
 	config.dev = dev;
-	config.cells = priv->cells;
-	config.ncells = priv->ncells;
 	config.priv = priv;
 	config.size = priv->mtd->size;
 
-	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+	priv->nvmem = devm_nvmem_register(dev, &config);
+	if (IS_ERR(priv->nvmem))
+		return PTR_ERR(priv->nvmem);
+
+	return u_boot_env_parse(priv);
 }
 
 static const struct of_device_id u_boot_env_of_match_table[] = {
-- 
2.43.0

[PATCH 6.6 07/91] nvmem: u-boot-env: use nvmem device helpers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit a832556d23c5a11115f300011a5874d6107a0d62 ]

Use nvmem_dev_size() and nvmem_device_read() to make this driver less
mtd dependent.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-4-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1eb ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/u-boot-env.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index dd9d0ad22712..111905189341 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -127,27 +127,34 @@ static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
 
 static int u_boot_env_parse(struct u_boot_env *priv)
 {
+	struct nvmem_device *nvmem = priv->nvmem;
 	struct device *dev = priv->dev;
 	size_t crc32_data_offset;
 	size_t crc32_data_len;
 	size_t crc32_offset;
 	size_t data_offset;
 	size_t data_len;
+	size_t dev_size;
 	uint32_t crc32;
 	uint32_t calc;
-	size_t bytes;
 	uint8_t *buf;
+	int bytes;
 	int err;
 
-	buf = kcalloc(1, priv->mtd->size, GFP_KERNEL);
+	dev_size = nvmem_dev_size(nvmem);
+
+	buf = kcalloc(1, dev_size, GFP_KERNEL);
 	if (!buf) {
 		err = -ENOMEM;
 		goto err_out;
 	}
 
-	err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf);
-	if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) {
-		dev_err(dev, "Failed to read from mtd: %d\n", err);
+	bytes = nvmem_device_read(nvmem, 0, dev_size, buf);
+	if (bytes < 0) {
+		err = bytes;
+		goto err_kfree;
+	} else if (bytes != dev_size) {
+		err = -EIO;
 		goto err_kfree;
 	}
 
@@ -169,8 +176,8 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 		break;
 	}
 	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
-	crc32_data_len = priv->mtd->size - crc32_data_offset;
-	data_len = priv->mtd->size - data_offset;
+	crc32_data_len = dev_size - crc32_data_offset;
+	data_len = dev_size - data_offset;
 
 	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
 	if (calc != crc32) {
@@ -179,7 +186,7 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 		goto err_kfree;
 	}
 
-	buf[priv->mtd->size - 1] = '\0';
+	buf[dev_size - 1] = '\0';
 	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
 	if (err)
 		dev_err(dev, "Failed to add cells: %d\n", err);
-- 
2.43.0

[PATCH 6.6 08/91] nvmem: u-boot-env: improve coding style

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafał Miłecki <rafal@milecki.pl>

[ Upstream commit 6bafe07c930676d6430be471310958070816a595 ]

1. Prefer kzalloc() over kcalloc()
   See memory-allocation.rst which says: "to be on the safe side it's
   best to use routines that set memory to zero, like kzalloc()"
2. Drop dev_err() for u_boot_env_add_cells() fail
   It can fail only on -ENOMEM. We don't want to print error then.
3. Add extra "crc32_addr" variable
   It makes code reading header's crc32 easier to understand / review.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231221173421.13737-5-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 8679e8b4a1eb ("nvmem: u-boot-env: error if NVMEM device is too small")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/u-boot-env.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 111905189341..befbab156cda 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -132,6 +132,7 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 	size_t crc32_data_offset;
 	size_t crc32_data_len;
 	size_t crc32_offset;
+	__le32 *crc32_addr;
 	size_t data_offset;
 	size_t data_len;
 	size_t dev_size;
@@ -143,7 +144,7 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 
 	dev_size = nvmem_dev_size(nvmem);
 
-	buf = kcalloc(1, dev_size, GFP_KERNEL);
+	buf = kzalloc(dev_size, GFP_KERNEL);
 	if (!buf) {
 		err = -ENOMEM;
 		goto err_out;
@@ -175,7 +176,8 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
 		break;
 	}
-	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
+	crc32_addr = (__le32 *)(buf + crc32_offset);
+	crc32 = le32_to_cpu(*crc32_addr);
 	crc32_data_len = dev_size - crc32_data_offset;
 	data_len = dev_size - data_offset;
 
@@ -188,8 +190,6 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 
 	buf[dev_size - 1] = '\0';
 	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
-	if (err)
-		dev_err(dev, "Failed to add cells: %d\n", err);
 
 err_kfree:
 	kfree(buf);
-- 
2.43.0

[PATCH 6.6 09/91] nvmem: u-boot-env: error if NVMEM device is too small

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Thomson <git@johnthomson.fastmail.com.au>

[ Upstream commit 8679e8b4a1ebdb40c4429e49368d29353e07b601 ]

Verify data size before trying to parse it to avoid reading out of
buffer. This could happen in case of problems at MTD level or invalid DT
bindings.

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Cc: stable <stable@kernel.org>
Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
[rmilecki: simplify commit description & rebase]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240902142510.71096-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/u-boot-env.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index befbab156cda..adabbfdad6fb 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -176,6 +176,13 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
 		break;
 	}
+
+	if (dev_size < data_offset) {
+		dev_err(dev, "Device too small for u-boot-env\n");
+		err = -EIO;
+		goto err_kfree;
+	}
+
 	crc32_addr = (__le32 *)(buf + crc32_offset);
 	crc32 = le32_to_cpu(*crc32_addr);
 	crc32_data_len = dev_size - crc32_data_offset;
-- 
2.43.0

[PATCH 6.6 10/91] ksmbd: override fsids for share path check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit a018c1b636e79b60149b41151ded7c2606d8606e ]

Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for share
path check.

Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/server/mgmt/share_config.c | 15 ++++++++++++---
 fs/smb/server/mgmt/share_config.h |  4 +++-
 fs/smb/server/mgmt/tree_connect.c |  9 +++++----
 fs/smb/server/mgmt/tree_connect.h |  4 ++--
 fs/smb/server/smb2pdu.c           |  2 +-
 fs/smb/server/smb_common.c        |  9 +++++++--
 fs/smb/server/smb_common.h        |  2 ++
 7 files changed, 32 insertions(+), 13 deletions(-)

diff --git a/fs/smb/server/mgmt/share_config.c b/fs/smb/server/mgmt/share_config.c
index e0a6b758094f..d8d03070ae44 100644
--- a/fs/smb/server/mgmt/share_config.c
+++ b/fs/smb/server/mgmt/share_config.c
@@ -15,6 +15,7 @@
 #include "share_config.h"
 #include "user_config.h"
 #include "user_session.h"
+#include "../connection.h"
 #include "../transport_ipc.h"
 #include "../misc.h"
 
@@ -120,12 +121,13 @@ static int parse_veto_list(struct ksmbd_share_config *share,
 	return 0;
 }
 
-static struct ksmbd_share_config *share_config_request(struct unicode_map *um,
+static struct ksmbd_share_config *share_config_request(struct ksmbd_work *work,
 						       const char *name)
 {
 	struct ksmbd_share_config_response *resp;
 	struct ksmbd_share_config *share = NULL;
 	struct ksmbd_share_config *lookup;
+	struct unicode_map *um = work->conn->um;
 	int ret;
 
 	resp = ksmbd_ipc_share_config_request(name);
@@ -181,7 +183,14 @@ static struct ksmbd_share_config *share_config_request(struct unicode_map *um,
 				      KSMBD_SHARE_CONFIG_VETO_LIST(resp),
 				      resp->veto_list_sz);
 		if (!ret && share->path) {
+			if (__ksmbd_override_fsids(work, share)) {
+				kill_share(share);
+				share = NULL;
+				goto out;
+			}
+
 			ret = kern_path(share->path, 0, &share->vfs_path);
+			ksmbd_revert_fsids(work);
 			if (ret) {
 				ksmbd_debug(SMB, "failed to access '%s'\n",
 					    share->path);
@@ -214,7 +223,7 @@ static struct ksmbd_share_config *share_config_request(struct unicode_map *um,
 	return share;
 }
 
-struct ksmbd_share_config *ksmbd_share_config_get(struct unicode_map *um,
+struct ksmbd_share_config *ksmbd_share_config_get(struct ksmbd_work *work,
 						  const char *name)
 {
 	struct ksmbd_share_config *share;
@@ -227,7 +236,7 @@ struct ksmbd_share_config *ksmbd_share_config_get(struct unicode_map *um,
 
 	if (share)
 		return share;
-	return share_config_request(um, name);
+	return share_config_request(work, name);
 }
 
 bool ksmbd_share_veto_filename(struct ksmbd_share_config *share,
diff --git a/fs/smb/server/mgmt/share_config.h b/fs/smb/server/mgmt/share_config.h
index 5f591751b923..d4ac2dd4de20 100644
--- a/fs/smb/server/mgmt/share_config.h
+++ b/fs/smb/server/mgmt/share_config.h
@@ -11,6 +11,8 @@
 #include <linux/path.h>
 #include <linux/unicode.h>
 
+struct ksmbd_work;
+
 struct ksmbd_share_config {
 	char			*name;
 	char			*path;
@@ -68,7 +70,7 @@ static inline void ksmbd_share_config_put(struct ksmbd_share_config *share)
 	__ksmbd_share_config_put(share);
 }
 
-struct ksmbd_share_config *ksmbd_share_config_get(struct unicode_map *um,
+struct ksmbd_share_config *ksmbd_share_config_get(struct ksmbd_work *work,
 						  const char *name);
 bool ksmbd_share_veto_filename(struct ksmbd_share_config *share,
 			       const char *filename);
diff --git a/fs/smb/server/mgmt/tree_connect.c b/fs/smb/server/mgmt/tree_connect.c
index d2c81a8a11dd..94a52a75014a 100644
--- a/fs/smb/server/mgmt/tree_connect.c
+++ b/fs/smb/server/mgmt/tree_connect.c
@@ -16,17 +16,18 @@
 #include "user_session.h"
 
 struct ksmbd_tree_conn_status
-ksmbd_tree_conn_connect(struct ksmbd_conn *conn, struct ksmbd_session *sess,
-			const char *share_name)
+ksmbd_tree_conn_connect(struct ksmbd_work *work, const char *share_name)
 {
 	struct ksmbd_tree_conn_status status = {-ENOENT, NULL};
 	struct ksmbd_tree_connect_response *resp = NULL;
 	struct ksmbd_share_config *sc;
 	struct ksmbd_tree_connect *tree_conn = NULL;
 	struct sockaddr *peer_addr;
+	struct ksmbd_conn *conn = work->conn;
+	struct ksmbd_session *sess = work->sess;
 	int ret;
 
-	sc = ksmbd_share_config_get(conn->um, share_name);
+	sc = ksmbd_share_config_get(work, share_name);
 	if (!sc)
 		return status;
 
@@ -61,7 +62,7 @@ ksmbd_tree_conn_connect(struct ksmbd_conn *conn, struct ksmbd_session *sess,
 		struct ksmbd_share_config *new_sc;
 
 		ksmbd_share_config_del(sc);
-		new_sc = ksmbd_share_config_get(conn->um, share_name);
+		new_sc = ksmbd_share_config_get(work, share_name);
 		if (!new_sc) {
 			pr_err("Failed to update stale share config\n");
 			status.ret = -ESTALE;
diff --git a/fs/smb/server/mgmt/tree_connect.h b/fs/smb/server/mgmt/tree_connect.h
index 6377a70b811c..a42cdd051041 100644
--- a/fs/smb/server/mgmt/tree_connect.h
+++ b/fs/smb/server/mgmt/tree_connect.h
@@ -13,6 +13,7 @@
 struct ksmbd_share_config;
 struct ksmbd_user;
 struct ksmbd_conn;
+struct ksmbd_work;
 
 enum {
 	TREE_NEW = 0,
@@ -50,8 +51,7 @@ static inline int test_tree_conn_flag(struct ksmbd_tree_connect *tree_conn,
 struct ksmbd_session;
 
 struct ksmbd_tree_conn_status
-ksmbd_tree_conn_connect(struct ksmbd_conn *conn, struct ksmbd_session *sess,
-			const char *share_name);
+ksmbd_tree_conn_connect(struct ksmbd_work *work, const char *share_name);
 void ksmbd_tree_connect_put(struct ksmbd_tree_connect *tcon);
 
 int ksmbd_tree_conn_disconnect(struct ksmbd_session *sess,
diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index 458cc736286a..4ac6068c50cc 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -1959,7 +1959,7 @@ int smb2_tree_connect(struct ksmbd_work *work)
 	ksmbd_debug(SMB, "tree connect request for tree %s treename %s\n",
 		    name, treename);
 
-	status = ksmbd_tree_conn_connect(conn, sess, name);
+	status = ksmbd_tree_conn_connect(work, name);
 	if (status.ret == KSMBD_TREE_CONN_STATUS_OK)
 		rsp->hdr.Id.SyncId.TreeId = cpu_to_le32(status.tree_conn->id);
 	else
diff --git a/fs/smb/server/smb_common.c b/fs/smb/server/smb_common.c
index 474dadf6b7b8..13818ecb6e1b 100644
--- a/fs/smb/server/smb_common.c
+++ b/fs/smb/server/smb_common.c
@@ -732,10 +732,10 @@ bool is_asterisk(char *p)
 	return p && p[0] == '*';
 }
 
-int ksmbd_override_fsids(struct ksmbd_work *work)
+int __ksmbd_override_fsids(struct ksmbd_work *work,
+		struct ksmbd_share_config *share)
 {
 	struct ksmbd_session *sess = work->sess;
-	struct ksmbd_share_config *share = work->tcon->share_conf;
 	struct cred *cred;
 	struct group_info *gi;
 	unsigned int uid;
@@ -775,6 +775,11 @@ int ksmbd_override_fsids(struct ksmbd_work *work)
 	return 0;
 }
 
+int ksmbd_override_fsids(struct ksmbd_work *work)
+{
+	return __ksmbd_override_fsids(work, work->tcon->share_conf);
+}
+
 void ksmbd_revert_fsids(struct ksmbd_work *work)
 {
 	const struct cred *cred;
diff --git a/fs/smb/server/smb_common.h b/fs/smb/server/smb_common.h
index f1092519c0c2..4a3148b0167f 100644
--- a/fs/smb/server/smb_common.h
+++ b/fs/smb/server/smb_common.h
@@ -447,6 +447,8 @@ int ksmbd_extract_shortname(struct ksmbd_conn *conn,
 int ksmbd_smb_negotiate_common(struct ksmbd_work *work, unsigned int command);
 
 int ksmbd_smb_check_shared_mode(struct file *filp, struct ksmbd_file *curr_fp);
+int __ksmbd_override_fsids(struct ksmbd_work *work,
+			   struct ksmbd_share_config *share);
 int ksmbd_override_fsids(struct ksmbd_work *work);
 void ksmbd_revert_fsids(struct ksmbd_work *work);
 
-- 
2.43.0

[PATCH 6.6 11/91] ksmbd: override fsids for smb2_query_info()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit f6bd41280a44dcc2e0a25ed72617d25f586974a7 ]

Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for
smb2_query_info().

Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/server/smb2pdu.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index 4ac6068c50cc..c527050bc981 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -5601,6 +5601,11 @@ int smb2_query_info(struct ksmbd_work *work)
 
 	ksmbd_debug(SMB, "GOT query info request\n");
 
+	if (ksmbd_override_fsids(work)) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
 	switch (req->InfoType) {
 	case SMB2_O_INFO_FILE:
 		ksmbd_debug(SMB, "GOT SMB2_O_INFO_FILE\n");
@@ -5619,6 +5624,7 @@ int smb2_query_info(struct ksmbd_work *work)
 			    req->InfoType);
 		rc = -EOPNOTSUPP;
 	}
+	ksmbd_revert_fsids(work);
 
 	if (!rc) {
 		rsp->StructureSize = cpu_to_le16(9);
@@ -5628,6 +5634,7 @@ int smb2_query_info(struct ksmbd_work *work)
 					le32_to_cpu(rsp->OutputBufferLength));
 	}
 
+err_out:
 	if (rc < 0) {
 		if (rc == -EACCES)
 			rsp->hdr.Status = STATUS_ACCESS_DENIED;
-- 
2.43.0

[PATCH 6.6 12/91] usbnet: ipheth: remove extraneous rx URB length check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Foster Snowhill <forst@pen.gy>

[ Upstream commit 655b46d7a39ac6f049698b27c1568c0f7ff85d1e ]

Rx URB length was already checked in ipheth_rcvbulk_callback_legacy()
and ipheth_rcvbulk_callback_ncm(), depending on the current mode.
The check in ipheth_rcvbulk_callback() was thus mostly a duplicate.

The only place in ipheth_rcvbulk_callback() where we care about the URB
length is for the initial control frame. These frames are always 4 bytes
long. This has been checked as far back as iOS 4.2.1 on iPhone 3G.

Remove the extraneous URB length check. For control frames, check for
the specific 4-byte length instead.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 6eeef10edada..017255615508 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -286,11 +286,6 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 		return;
 	}
 
-	if (urb->actual_length <= IPHETH_IP_ALIGN) {
-		dev->net->stats.rx_length_errors++;
-		return;
-	}
-
 	/* RX URBs starting with 0x00 0x01 do not encapsulate Ethernet frames,
 	 * but rather are control frames. Their purpose is not documented, and
 	 * they don't affect driver functionality, okay to drop them.
@@ -298,7 +293,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 	 * URB received from the bulk IN endpoint.
 	 */
 	if (unlikely
-		(((char *)urb->transfer_buffer)[0] == 0 &&
+		(urb->actual_length == 4 &&
+		 ((char *)urb->transfer_buffer)[0] == 0 &&
 		 ((char *)urb->transfer_buffer)[1] == 1))
 		goto rx_submit;
 
-- 
2.43.0

[PATCH 6.6 13/91] usbnet: ipheth: drop RX URBs with no payload

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Foster Snowhill <forst@pen.gy>

[ Upstream commit 94d7eeb6c0ef0310992944f0d0296929816a2cb0 ]

On iPhone 15 Pro Max one can observe periodic URBs with no payload
on the "bulk in" (RX) endpoint. These don't seem to do anything
meaningful. Reproduced on iOS 17.5.1 and 17.6.

This behaviour isn't observed on iPhone 11 on the same iOS version. The
nature of these zero-length URBs is so far unknown.

Drop RX URBs with no payload.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 017255615508..f04c7bf79665 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -286,6 +286,12 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 		return;
 	}
 
+	/* iPhone may periodically send URBs with no payload
+	 * on the "bulk in" endpoint. It is safe to ignore them.
+	 */
+	if (urb->actual_length == 0)
+		goto rx_submit;
+
 	/* RX URBs starting with 0x00 0x01 do not encapsulate Ethernet frames,
 	 * but rather are control frames. Their purpose is not documented, and
 	 * they don't affect driver functionality, okay to drop them.
-- 
2.43.0

[PATCH 6.6 14/91] usbnet: ipheth: do not stop RX on failing RX callback

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Foster Snowhill <forst@pen.gy>

[ Upstream commit 74efed51e0a4d62f998f806c307778b47fc73395 ]

RX callbacks can fail for multiple reasons:

* Payload too short
* Payload formatted incorrecly (e.g. bad NCM framing)
* Lack of memory

None of these should cause the driver to seize up.

Make such failures non-critical and continue processing further
incoming URBs.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index f04c7bf79665..cdc72559790a 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -308,7 +308,6 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 	if (retval != 0) {
 		dev_err(&dev->intf->dev, "%s: callback retval: %d\n",
 			__func__, retval);
-		return;
 	}
 
 rx_submit:
-- 
2.43.0

[PATCH 6.6 15/91] usbnet: ipheth: fix carrier detection in modes 1 and 4

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Foster Snowhill <forst@pen.gy>

[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ]

Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.

Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:

* 1 byte (seen on iOS 4.2.1, 8.4):
    * 03: carrier off (mode 0)
    * 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
    * 03 03 03: carrier off (mode 0)
    * 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
    * 03 03 03 00: carrier off (mode 0)
    * 04 03 03 00: carrier off (mode 1)
    * 06 03 03 00: carrier off (mode 4)
    * 04 04 03 04: carrier on (mode 0 and 1)
    * 06 04 03 04: carrier on (mode 4)

Before this change, the driver always used the first byte of the
response to determine carrier state.

>From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.

Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.

Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.

Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index cdc72559790a..46afb95ffabe 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -355,13 +355,14 @@ static int ipheth_carrier_set(struct ipheth_device *dev)
 			0x02, /* index */
 			dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
 			IPHETH_CTRL_TIMEOUT);
-	if (retval < 0) {
+	if (retval <= 0) {
 		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
 			__func__, retval);
 		return retval;
 	}
 
-	if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON) {
+	if ((retval == 1 && dev->ctrl_buf[0] == IPHETH_CARRIER_ON) ||
+	    (retval >= 2 && dev->ctrl_buf[1] == IPHETH_CARRIER_ON)) {
 		netif_carrier_on(dev->net);
 		if (dev->tx_urb->status != -EINPROGRESS)
 			netif_wake_queue(dev->net);
-- 
2.43.0

[PATCH 6.6 16/91] net: ethernet: use ip_hdrlen() instead of bit shift

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moon Yeounsu <yyyynoom@gmail.com>

[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ]

`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.

It also compresses two lines to a single line.

Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/jme.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index 1732ec3c3dbd..a718207988f2 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -946,15 +946,13 @@ jme_udpsum(struct sk_buff *skb)
 	if (skb->protocol != htons(ETH_P_IP))
 		return csum;
 	skb_set_network_header(skb, ETH_HLEN);
-	if ((ip_hdr(skb)->protocol != IPPROTO_UDP) ||
-	    (skb->len < (ETH_HLEN +
-			(ip_hdr(skb)->ihl << 2) +
-			sizeof(struct udphdr)))) {
+
+	if (ip_hdr(skb)->protocol != IPPROTO_UDP ||
+	    skb->len < (ETH_HLEN + ip_hdrlen(skb) + sizeof(struct udphdr))) {
 		skb_reset_network_header(skb);
 		return csum;
 	}
-	skb_set_transport_header(skb,
-			ETH_HLEN + (ip_hdr(skb)->ihl << 2));
+	skb_set_transport_header(skb, ETH_HLEN + ip_hdrlen(skb));
 	csum = udp_hdr(skb)->check;
 	skb_reset_transport_header(skb);
 	skb_reset_network_header(skb);
-- 
2.43.0

[PATCH 6.6 17/91] drm: panel-orientation-quirks: Add quirk for Ayn Loki Zero

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>

[ Upstream commit b86aa4140f6a8f01f35bfb05af60e01a55b48803 ]

Add quirk orientation for the Ayn Loki Zero.

This also has been tested/used by the JELOS team.

Signed-off-by: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240728124731.168452-2-boukehaarsma23@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 039da0d1a613..79ccf4959df4 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -208,6 +208,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_MATCH(DMI_BOARD_NAME, "KUN"),
 		},
 		.driver_data = (void *)&lcd1600x2560_rightside_up,
+	}, {	/* AYN Loki Zero */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ayn"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Loki Zero"),
+		},
+		.driver_data = (void *)&lcd1080x1920_leftside_up,
 	}, {	/* Chuwi HiBook (CWI514) */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
-- 
2.43.0

[PATCH 6.6 18/91] drm: panel-orientation-quirks: Add quirk for Ayn Loki Max

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>

[ Upstream commit 2c71c8459c8ca66bd8f597effaac892ee8448a9f ]

Add quirk orientation for Ayn Loki Max model.

This has been tested by JELOS team that uses their
own patched kernel for a while now and confirmed by
users in the ChimeraOS discord servers.

Signed-off-by: Bouke Sybren Haarsma <boukehaarsma23@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240728124731.168452-3-boukehaarsma23@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
index 79ccf4959df4..5b2506c65e95 100644
--- a/drivers/gpu/drm/drm_panel_orientation_quirks.c
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -208,6 +208,12 @@ static const struct dmi_system_id orientation_data[] = {
 		  DMI_MATCH(DMI_BOARD_NAME, "KUN"),
 		},
 		.driver_data = (void *)&lcd1600x2560_rightside_up,
+	}, {    /* AYN Loki Max */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ayn"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Loki Max"),
+		},
+		.driver_data = (void *)&lcd1080x1920_leftside_up,
 	}, {	/* AYN Loki Zero */
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ayn"),
-- 
2.43.0

[PATCH 6.6 19/91] net: phy: vitesse: repair vsc73xx autonegotiation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pawel Dembicki <paweldembicki@gmail.com>

[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]

When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/vitesse.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 897b979ec03c..3b5fcaf0dd36 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -237,16 +237,6 @@ static int vsc739x_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int vsc73xx_config_aneg(struct phy_device *phydev)
-{
-	/* The VSC73xx switches does not like to be instructed to
-	 * do autonegotiation in any way, it prefers that you just go
-	 * with the power-on/reset defaults. Writing some registers will
-	 * just make autonegotiation permanently fail.
-	 */
-	return 0;
-}
-
 /* This adds a skew for both TX and RX clocks, so the skew should only be
  * applied to "rgmii-id" interfaces. It may not work as expected
  * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
@@ -444,7 +434,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -453,7 +442,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc738x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -462,7 +450,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
@@ -471,7 +458,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask    = 0x000ffff0,
 	/* PHY_GBIT_FEATURES */
 	.config_init    = vsc739x_config_init,
-	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
 	.write_page     = vsc73xx_write_page,
 }, {
-- 
2.43.0

[PATCH 6.6 20/91] powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit e7e846dc6c73fbc94ae8b4ec20d05627646416f2 ]

Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when
passing hugepage reservation on command line:

  Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot
  HugeTLB: allocating 1 of page size 1.00 GiB failed.  Only allocated 0 hugepages.
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936
  Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS
  NIP:  c1020240 LR: c10201d0 CTR: 00000000
  REGS: c13fdd30 TRAP: 0700   Not tainted  (6.10.0-rc6-00396-g6b0e82791bd0-dirty)
  MSR:  00021000 <CE,ME>  CR: 44084288  XER: 20000000

  GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000
  GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149
  GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000
  GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000
  NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284
  LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284
  Call Trace:
  [c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable)
  [c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8
  [c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc
  [c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280
  [c13fdf30] [c0078904] parse_args+0x200/0x4c4
  [c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0
  [c13fdff0] [c0000434] set_ivor+0x12c/0x168
  Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb
  ---[ end trace 0000000000000000 ]---

This is due to virt_addr_valid() using high_memory before it is set.

high_memory is set in mem_init() using max_low_pfn, but max_low_pfn
is available long before, it is set in mem_topology_setup(). So just
like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM")
moved the setting of max_mapnr immediately after the call to
mem_topology_setup(), the same can be done for high_memory.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/setup-common.c | 1 +
 arch/powerpc/mm/mem.c              | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 20f72cd1d813..03eaad5949f1 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -950,6 +950,7 @@ void __init setup_arch(char **cmdline_p)
 	mem_topology_setup();
 	/* Set max_mapnr before paging_init() */
 	set_max_mapnr(max_pfn);
+	high_memory = (void *)__va(max_low_pfn * PAGE_SIZE);
 
 	/*
 	 * Release secondary cpus out of their spinloops at 0x60 now that
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 07e8f4f1e07f..9dbef559af4c 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -287,8 +287,6 @@ void __init mem_init(void)
 	swiotlb_init(ppc_swiotlb_enable, ppc_swiotlb_flags);
 #endif
 
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-
 	kasan_late_init();
 
 	memblock_free_all();
-- 
2.43.0

[PATCH 6.6 21/91] wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bert Karwatzki <spasswolf@web.de>

[ Upstream commit 479ffee68d59c599f8aed8fa2dcc8e13e7bd13c3 ]

When disabling wifi mt7921_ipv6_addr_change() is called as a notifier.
At this point mvif->phy is already NULL so we cannot use it here.

Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240812104542.80760-1-spasswolf@web.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 6a5c2cae087d..6dec54431312 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -1095,7 +1095,7 @@ static void mt7921_ipv6_addr_change(struct ieee80211_hw *hw,
 				    struct inet6_dev *idev)
 {
 	struct mt792x_vif *mvif = (struct mt792x_vif *)vif->drv_priv;
-	struct mt792x_dev *dev = mvif->phy->dev;
+	struct mt792x_dev *dev = mt792x_hw_dev(hw);
 	struct inet6_ifaddr *ifa;
 	struct in6_addr ns_addrs[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
 	struct sk_buff *skb;
-- 
2.43.0

[PATCH 6.6 22/91] net: hns3: use correct release function during uninitialization

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peiyang Wang <wangpeiyang1@huawei.com>

[ Upstream commit 7660833d217528c8f2385528951ab820a031e4e3 ]

pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.

Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 92c592c177e6..9650ce594e2f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -11370,7 +11370,7 @@ static void hclge_pci_uninit(struct hclge_dev *hdev)
 
 	pcim_iounmap(pdev, hdev->hw.hw.io_base);
 	pci_free_irq_vectors(pdev);
-	pci_release_mem_regions(pdev);
+	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 }
 
-- 
2.43.0

[PATCH 6.6 23/91] btrfs: update target inodes ctime on unlink

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit 3bc2ac2f8f0b78a13140fc72022771efe0c9b778 ]

Unlink changes the link count on the target inode. POSIX mandates that
the ctime must also change when this occurs.

According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html:

"Upon successful completion, unlink() shall mark for update the last data
 modification and last file status change timestamps of the parent
 directory. Also, if the file's link count is not 0, the last file status
 change timestamp of the file shall be marked for update."

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add link to the opengroup docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index a42238211887..ee04185d8e0f 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4148,6 +4148,7 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans,
 
 	btrfs_i_size_write(dir, dir->vfs_inode.i_size - name->len * 2);
 	inode_inc_iversion(&inode->vfs_inode);
+	inode_set_ctime_current(&inode->vfs_inode);
 	inode_inc_iversion(&dir->vfs_inode);
 	inode_set_ctime_current(&inode->vfs_inode);
 	dir->vfs_inode.i_mtime = inode_set_ctime_current(&dir->vfs_inode);
-- 
2.43.0

[PATCH 6.6 24/91] Input: ads7846 - ratelimit the spi_sync error message

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@denx.de>

[ Upstream commit ccbfea78adf75d3d9e87aa739dab83254f5333fa ]

In case the touch controller is not connected, this message keeps scrolling
on the console indefinitelly. Ratelimit it to avoid filling kernel logs.

"
ads7846 spi2.1: spi_sync --> -22
"

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240708211913.171243-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/ads7846.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index a66375700a63..8b8c43b3c27f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -808,7 +808,7 @@ static void ads7846_read_state(struct ads7846 *ts)
 		m = &ts->msg[msg_idx];
 		error = spi_sync(ts->spi, m);
 		if (error) {
-			dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
+			dev_err_ratelimited(&ts->spi->dev, "spi_sync --> %d\n", error);
 			packet->ignore = true;
 			return;
 		}
-- 
2.43.0

[PATCH 6.6 25/91] Input: synaptics - enable SMBus for HP Elitebook 840 G2

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonathan Denose <jdenose@google.com>

[ Upstream commit da897484557b34a54fabb81f6c223c19a69e546d ]

The kernel reports that the touchpad for this device can support a
different bus.

With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.

Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 7a303a9d6bf7..cff3393f0dd0 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -189,6 +189,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN2054", /* E480 */
 	"LEN2055", /* E580 */
 	"LEN2068", /* T14 Gen 1 */
+	"SYN3015", /* HP EliteBook 840 G2 */
 	"SYN3052", /* HP EliteBook 840 G4 */
 	"SYN3221", /* HP 15-ay000 */
 	"SYN323d", /* HP Spectre X360 13-w013dx */
-- 
2.43.0

[PATCH 6.6 26/91] HID: multitouch: Add support for GT7868Q

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Savin <envelsavinds@gmail.com>

[ Upstream commit c8000deb68365b461b324d68c7ea89d730f0bb85 ]

GT7868Q has incorrect data in the report and needs a fixup.
The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4
and has been tested on the device.

Signed-off-by: Dmitry Savin <envelsavinds@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h        |  2 ++
 drivers/hid/hid-multitouch.c | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4246348ca16e..a5987fafbedd 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -515,6 +515,8 @@
 #define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_E100 0xe100
 
 #define I2C_VENDOR_ID_GOODIX		0x27c6
+#define I2C_DEVICE_ID_GOODIX_01E8	0x01e8
+#define I2C_DEVICE_ID_GOODIX_01E9	0x01e9
 #define I2C_DEVICE_ID_GOODIX_01F0	0x01f0
 
 #define USB_VENDOR_ID_GOODTOUCH		0x1aad
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 17efe6e2a1a4..8ef41d6e71d4 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1442,6 +1442,30 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
 	return 0;
 }
 
+static __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+			     unsigned int *size)
+{
+	if (hdev->vendor == I2C_VENDOR_ID_GOODIX &&
+	    (hdev->product == I2C_DEVICE_ID_GOODIX_01E8 ||
+	     hdev->product == I2C_DEVICE_ID_GOODIX_01E9)) {
+		if (rdesc[607] == 0x15) {
+			rdesc[607] = 0x25;
+			dev_info(
+				&hdev->dev,
+				"GT7868Q report descriptor fixup is applied.\n");
+		} else {
+			dev_info(
+				&hdev->dev,
+				"The byte is not expected for fixing the report descriptor. \
+It's possible that the touchpad firmware is not suitable for applying the fix. \
+got: %x\n",
+				rdesc[607]);
+		}
+	}
+
+	return rdesc;
+}
+
 static void mt_report(struct hid_device *hid, struct hid_report *report)
 {
 	struct mt_device *td = hid_get_drvdata(hid);
@@ -2038,6 +2062,14 @@ static const struct hid_device_id mt_devices[] = {
 		MT_BT_DEVICE(USB_VENDOR_ID_FRUCTEL,
 			USB_DEVICE_ID_GAMETEL_MT_MODE) },
 
+	/* Goodix GT7868Q devices */
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
+	  HID_DEVICE(BUS_I2C, HID_GROUP_ANY, I2C_VENDOR_ID_GOODIX,
+		     I2C_DEVICE_ID_GOODIX_01E8) },
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
+	  HID_DEVICE(BUS_I2C, HID_GROUP_ANY, I2C_VENDOR_ID_GOODIX,
+		     I2C_DEVICE_ID_GOODIX_01E8) },
+
 	/* GoodTouch panels */
 	{ .driver_data = MT_CLS_NSMU,
 		MT_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
@@ -2273,6 +2305,7 @@ static struct hid_driver mt_driver = {
 	.feature_mapping = mt_feature_mapping,
 	.usage_table = mt_grabbed_usages,
 	.event = mt_event,
+	.report_fixup = mt_report_fixup,
 	.report = mt_report,
 #ifdef CONFIG_PM
 	.suspend = mt_suspend,
-- 
2.43.0

[PATCH 6.6 27/91] scripts: kconfig: merge_config: config files: add a trailing newline

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit 33330bcf031818e60a816db0cfd3add9eecc3b28 ]

When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.

file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config

This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"

Making sure so we add a newline at the end of every config file that is
passed into the script.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/merge_config.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
index 902eb429b9db..0b7952471c18 100755
--- a/scripts/kconfig/merge_config.sh
+++ b/scripts/kconfig/merge_config.sh
@@ -167,6 +167,8 @@ for ORIG_MERGE_FILE in $MERGE_LIST ; do
 			sed -i "/$CFG[ =]/d" $MERGE_FILE
 		fi
 	done
+	# In case the previous file lacks a new line at the end
+	echo >> $TMP_FILE
 	cat $MERGE_FILE >> $TMP_FILE
 done
 
-- 
2.43.0

[PATCH 6.6 28/91] platform/surface: aggregator_registry: Add Support for Surface Pro 10

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maximilian Luz <luzmaximilian@gmail.com>

[ Upstream commit 9c8e022567bbec53bee8ae75c44b3d6cd2080d42 ]

Add SAM client device nodes for the Surface Pro 10. It seems to use the
same SAM client devices as the Surface Pro 9, so re-use its node group.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-2-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/surface/surface_aggregator_registry.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 0fe5be539652..c2651599685e 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -298,7 +298,7 @@ static const struct software_node *ssam_node_group_sp8[] = {
 	NULL,
 };
 
-/* Devices for Surface Pro 9 */
+/* Devices for Surface Pro 9 and 10 */
 static const struct software_node *ssam_node_group_sp9[] = {
 	&ssam_node_root,
 	&ssam_node_hub_kip,
@@ -337,6 +337,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Pro 9 */
 	{ "MSHW0343", (unsigned long)ssam_node_group_sp9 },
 
+	/* Surface Pro 10 */
+	{ "MSHW0510", (unsigned long)ssam_node_group_sp9 },
+
 	/* Surface Book 2 */
 	{ "MSHW0107", (unsigned long)ssam_node_group_gen5 },
 
-- 
2.43.0

[PATCH 6.6 29/91] platform/surface: aggregator_registry: Add support for Surface Laptop Go 3

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maximilian Luz <luzmaximilian@gmail.com>

[ Upstream commit ed235163c3f02329d5e37ed4485bbc39ed2568d4 ]

Add SAM client device nodes for the Surface Laptop Go 3. It seems to use
the same SAM client devices as the Surface Laptop Go 1 and 2, so re-use
their node group.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20240811131948.261806-3-luzmaximilian@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/surface/surface_aggregator_registry.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index c2651599685e..8c5b5f35d848 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -370,6 +370,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Laptop Go 2 */
 	{ "MSHW0290", (unsigned long)ssam_node_group_slg1 },
 
+	/* Surface Laptop Go 3 */
+	{ "MSHW0440", (unsigned long)ssam_node_group_slg1 },
+
 	/* Surface Laptop Studio */
 	{ "MSHW0123", (unsigned long)ssam_node_group_sls },
 
-- 
2.43.0

[PATCH 6.6 30/91] drm/msm/adreno: Fix error return if missing firmware-name

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 624ab9cde26a9f150b4fd268b0f3dae3184dc40c ]

-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode.  We want to
use this return code when there is no zap-shader node.  But not when
there is, but without a firmware-name property.  This case we want to
treat as-if the needed fw is not found.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 8090dde03280..96deaf85c0cd 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -99,7 +99,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 		 * was a bad idea, and is only provided for backwards
 		 * compatibility for older targets.
 		 */
-		return -ENODEV;
+		return -ENOENT;
 	}
 
 	if (IS_ERR(fw)) {
-- 
2.43.0

[PATCH 6.6 31/91] Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 7ce7c2283fa6843ab3c2adfeb83dcc504a107858 ]

Yet another quirk entry for Fujitsu laptop.  Lifebook E756 requires
i8041.nomux for keeping the touchpad working after suspend/resume.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1229056
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240814100630.2048-1-tiwai@suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index e9eb9554dd7b..bad238f69a7a 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -627,6 +627,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
 	},
+	{
+		/* Fujitsu Lifebook E756 */
+		/* https://bugzilla.suse.com/show_bug.cgi?id=1229056 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E756"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
 	{
 		/* Fujitsu Lifebook E5411 */
 		.matches = {
-- 
2.43.0

[PATCH 6.6 32/91] s390/mm: Prevent lowcore vs identity mapping overlap

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit a3ca27c405faad584af6e8e38cdafe5be73230a1 ]

The identity mapping position in virtual memory is randomized
together with the kernel mapping. That position can never
overlap with the lowcore even when the lowcore is relocated.

Prevent overlapping with the lowcore to allow independent
positioning of the identity mapping. With the current value
of the alternative lowcore address of 0x70000 the overlap
could happen in case the identity mapping is placed at zero.

This is a prerequisite for uncoupling of randomization base
of kernel image and identity mapping in virtual memory.

Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/setup.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index d48c7afe97e6..89fe0764af84 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -741,7 +741,23 @@ static void __init memblock_add_physmem_info(void)
 }
 
 /*
- * Reserve memory used for lowcore/command line/kernel image.
+ * Reserve memory used for lowcore.
+ */
+static void __init reserve_lowcore(void)
+{
+	void *lowcore_start = get_lowcore();
+	void *lowcore_end = lowcore_start + sizeof(struct lowcore);
+	void *start, *end;
+
+	if ((void *)__identity_base < lowcore_end) {
+		start = max(lowcore_start, (void *)__identity_base);
+		end = min(lowcore_end, (void *)(__identity_base + ident_map_size));
+		memblock_reserve(__pa(start), __pa(end));
+	}
+}
+
+/*
+ * Reserve memory used for absolute lowcore/command line/kernel image.
  */
 static void __init reserve_kernel(void)
 {
@@ -939,6 +955,7 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Do some memory reservations *before* memory is added to memblock */
 	reserve_pgtables();
+	reserve_lowcore();
 	reserve_kernel();
 	reserve_initrd();
 	reserve_certificate_list();
-- 
2.43.0

[PATCH 6.6 33/91] smb/server: fix return value of smb2_open()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: ChenXiaoSong <chenxiaosong@kylinos.cn>

[ Upstream commit 2186a116538a715b20e15f84fdd3545e5fe0a39b ]

In most error cases, error code is not returned in smb2_open(),
__process_request() will not print error message.

Fix this by returning the correct value at the end of smb2_open().

Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/server/smb2pdu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
index c527050bc981..c6473b08b1f3 100644
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -3714,7 +3714,7 @@ int smb2_open(struct ksmbd_work *work)
 	kfree(name);
 	kfree(lc);
 
-	return 0;
+	return rc;
 }
 
 static int readdir_info_level_struct_sz(int info_level)
-- 
2.43.0

[PATCH 6.6 34/91] NFSv4: Fix clearing of layout segments in layoutreturn

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit d72b7963115bea971a28eaa2cb76722c023f9fdf ]

Make sure that we clear the layout segments in cases where we see a
fatal error, and also in the case where the layout is invalid.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4proc.c | 9 ++++++---
 fs/nfs/pnfs.c     | 5 ++---
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index e7ac249df1ad..299ea2b86df6 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -9845,13 +9845,16 @@ static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata)
 		fallthrough;
 	default:
 		task->tk_status = 0;
+		lrp->res.lrs_present = 0;
 		fallthrough;
 	case 0:
 		break;
 	case -NFS4ERR_DELAY:
-		if (nfs4_async_handle_error(task, server, NULL, NULL) != -EAGAIN)
-			break;
-		goto out_restart;
+		if (nfs4_async_handle_error(task, server, NULL, NULL) ==
+		    -EAGAIN)
+			goto out_restart;
+		lrp->res.lrs_present = 0;
+		break;
 	}
 	return;
 out_restart:
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 664d3128e730..3d1a9f8634a9 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -1172,10 +1172,9 @@ void pnfs_layoutreturn_free_lsegs(struct pnfs_layout_hdr *lo,
 	LIST_HEAD(freeme);
 
 	spin_lock(&inode->i_lock);
-	if (!pnfs_layout_is_valid(lo) ||
-	    !nfs4_stateid_match_other(&lo->plh_stateid, arg_stateid))
+	if (!nfs4_stateid_match_other(&lo->plh_stateid, arg_stateid))
 		goto out_unlock;
-	if (stateid) {
+	if (stateid && pnfs_layout_is_valid(lo)) {
 		u32 seq = be32_to_cpu(arg_stateid->seqid);
 
 		pnfs_mark_matching_lsegs_invalid(lo, &freeme, range, seq);
-- 
2.43.0

[PATCH 6.6 35/91] NFS: Avoid unnecessary rescanning of the per-server delegation list

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit f92214e4c312f6ea9d78650cc6291d200f17abb6 ]

If the call to nfs_delegation_grab_inode() fails, we will not have
dropped any locks that require us to rescan the list.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/delegation.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index cf7365581031..a2034511b631 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -627,6 +627,9 @@ static int nfs_server_return_marked_delegations(struct nfs_server *server,
 				prev = delegation;
 			continue;
 		}
+		inode = nfs_delegation_grab_inode(delegation);
+		if (inode == NULL)
+			continue;
 
 		if (prev) {
 			struct inode *tmp = nfs_delegation_grab_inode(prev);
@@ -637,12 +640,6 @@ static int nfs_server_return_marked_delegations(struct nfs_server *server,
 			}
 		}
 
-		inode = nfs_delegation_grab_inode(delegation);
-		if (inode == NULL) {
-			rcu_read_unlock();
-			iput(to_put);
-			goto restart;
-		}
 		delegation = nfs_start_delegation_return_locked(NFS_I(inode));
 		rcu_read_unlock();
 
@@ -1164,7 +1161,6 @@ static int nfs_server_reap_unclaimed_delegations(struct nfs_server *server,
 	struct inode *inode;
 restart:
 	rcu_read_lock();
-restart_locked:
 	list_for_each_entry_rcu(delegation, &server->delegations, super_list) {
 		if (test_bit(NFS_DELEGATION_INODE_FREEING,
 					&delegation->flags) ||
@@ -1175,7 +1171,7 @@ static int nfs_server_reap_unclaimed_delegations(struct nfs_server *server,
 			continue;
 		inode = nfs_delegation_grab_inode(delegation);
 		if (inode == NULL)
-			goto restart_locked;
+			continue;
 		delegation = nfs_start_delegation_return_locked(NFS_I(inode));
 		rcu_read_unlock();
 		if (delegation != NULL) {
@@ -1296,7 +1292,6 @@ static int nfs_server_reap_expired_delegations(struct nfs_server *server,
 	nfs4_stateid stateid;
 restart:
 	rcu_read_lock();
-restart_locked:
 	list_for_each_entry_rcu(delegation, &server->delegations, super_list) {
 		if (test_bit(NFS_DELEGATION_INODE_FREEING,
 					&delegation->flags) ||
@@ -1307,7 +1302,7 @@ static int nfs_server_reap_expired_delegations(struct nfs_server *server,
 			continue;
 		inode = nfs_delegation_grab_inode(delegation);
 		if (inode == NULL)
-			goto restart_locked;
+			continue;
 		spin_lock(&delegation->lock);
 		cred = get_cred_rcu(delegation->cred);
 		nfs4_stateid_copy(&stateid, &delegation->stateid);
-- 
2.43.0

[PATCH 6.6 36/91] platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit f52e98d16e9bd7dd2b3aef8e38db5cbc9899d6a4 upstream.

The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.

Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.

Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.

For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these.

Fixes: e424fb8cc4e6 ("panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/panasonic-laptop.c |   49 +++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 10 deletions(-)

--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -773,6 +773,24 @@ static DEVICE_ATTR_RW(dc_brightness);
 static DEVICE_ATTR_RW(current_brightness);
 static DEVICE_ATTR_RW(cdpower);
 
+static umode_t pcc_sysfs_is_visible(struct kobject *kobj, struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct acpi_device *acpi = to_acpi_device(dev);
+	struct pcc_acpi *pcc = acpi_driver_data(acpi);
+
+	if (attr == &dev_attr_mute.attr)
+		return (pcc->num_sifr > SINF_MUTE) ? attr->mode : 0;
+
+	if (attr == &dev_attr_eco_mode.attr)
+		return (pcc->num_sifr > SINF_ECO_MODE) ? attr->mode : 0;
+
+	if (attr == &dev_attr_current_brightness.attr)
+		return (pcc->num_sifr > SINF_CUR_BRIGHT) ? attr->mode : 0;
+
+	return attr->mode;
+}
+
 static struct attribute *pcc_sysfs_entries[] = {
 	&dev_attr_numbatt.attr,
 	&dev_attr_lcdtype.attr,
@@ -787,8 +805,9 @@ static struct attribute *pcc_sysfs_entri
 };
 
 static const struct attribute_group pcc_attr_group = {
-	.name	= NULL,		/* put in device directory */
-	.attrs	= pcc_sysfs_entries,
+	.name		= NULL,		/* put in device directory */
+	.attrs		= pcc_sysfs_entries,
+	.is_visible	= pcc_sysfs_is_visible,
 };
 
 
@@ -941,12 +960,15 @@ static int acpi_pcc_hotkey_resume(struct
 	if (!pcc)
 		return -EINVAL;
 
-	acpi_pcc_write_sset(pcc, SINF_MUTE, pcc->mute);
-	acpi_pcc_write_sset(pcc, SINF_ECO_MODE, pcc->eco_mode);
+	if (pcc->num_sifr > SINF_MUTE)
+		acpi_pcc_write_sset(pcc, SINF_MUTE, pcc->mute);
+	if (pcc->num_sifr > SINF_ECO_MODE)
+		acpi_pcc_write_sset(pcc, SINF_ECO_MODE, pcc->eco_mode);
 	acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_key);
 	acpi_pcc_write_sset(pcc, SINF_AC_CUR_BRIGHT, pcc->ac_brightness);
 	acpi_pcc_write_sset(pcc, SINF_DC_CUR_BRIGHT, pcc->dc_brightness);
-	acpi_pcc_write_sset(pcc, SINF_CUR_BRIGHT, pcc->current_brightness);
+	if (pcc->num_sifr > SINF_CUR_BRIGHT)
+		acpi_pcc_write_sset(pcc, SINF_CUR_BRIGHT, pcc->current_brightness);
 
 	return 0;
 }
@@ -963,8 +985,12 @@ static int acpi_pcc_hotkey_add(struct ac
 
 	num_sifr = acpi_pcc_get_sqty(device);
 
-	if (num_sifr < 0 || num_sifr > 255) {
-		pr_err("num_sifr out of range");
+	/*
+	 * pcc->sinf is expected to at least have the AC+DC brightness entries.
+	 * Accesses to higher SINF entries are checked against num_sifr.
+	 */
+	if (num_sifr <= SINF_DC_CUR_BRIGHT || num_sifr > 255) {
+		pr_err("num_sifr %d out of range %d - 255\n", num_sifr, SINF_DC_CUR_BRIGHT + 1);
 		return -ENODEV;
 	}
 
@@ -1020,11 +1046,14 @@ static int acpi_pcc_hotkey_add(struct ac
 	acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, 0);
 	pcc->sticky_key = 0;
 
-	pcc->eco_mode = pcc->sinf[SINF_ECO_MODE];
-	pcc->mute = pcc->sinf[SINF_MUTE];
 	pcc->ac_brightness = pcc->sinf[SINF_AC_CUR_BRIGHT];
 	pcc->dc_brightness = pcc->sinf[SINF_DC_CUR_BRIGHT];
-	pcc->current_brightness = pcc->sinf[SINF_CUR_BRIGHT];
+	if (pcc->num_sifr > SINF_MUTE)
+		pcc->mute = pcc->sinf[SINF_MUTE];
+	if (pcc->num_sifr > SINF_ECO_MODE)
+		pcc->eco_mode = pcc->sinf[SINF_ECO_MODE];
+	if (pcc->num_sifr > SINF_CUR_BRIGHT)
+		pcc->current_brightness = pcc->sinf[SINF_CUR_BRIGHT];
 
 	/* add sysfs attributes */
 	result = sysfs_create_group(&device->dev.kobj, &pcc_attr_group);

[PATCH 6.6 37/91] platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 33297cef3101d950cec0033a0dce0a2d2bd59999 upstream.

Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value, allocate 1 entry extra.

Also make the SQTY <-> SINF package count mismatch error more verbose
to help debugging similar issues in the future.

This fixes the panasonic-laptop driver failing to probe() on some
devices with the following errors:

[    3.958887] SQTY reports bad SINF length SQTY: 37 SINF-pkg-count: 38
[    3.958892] Couldn't retrieve BIOS data
[    3.983685] Panasonic Laptop Support - With Macros: probe of MAT0019:00 failed with error -5

Fixes: 709ee531c153 ("panasonic-laptop: add Panasonic Let's Note laptop extras driver v0.94")
Cc: stable@vger.kernel.org
Tested-by: James Harmison <jharmison@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240909113227.254470-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/panasonic-laptop.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -337,7 +337,8 @@ static int acpi_pcc_retrieve_biosdata(st
 	}
 
 	if (pcc->num_sifr < hkey->package.count) {
-		pr_err("SQTY reports bad SINF length\n");
+		pr_err("SQTY reports bad SINF length SQTY: %lu SINF-pkg-count: %u\n",
+		       pcc->num_sifr, hkey->package.count);
 		status = AE_ERROR;
 		goto end;
 	}
@@ -994,6 +995,12 @@ static int acpi_pcc_hotkey_add(struct ac
 		return -ENODEV;
 	}
 
+	/*
+	 * Some DSDT-s have an off-by-one bug where the SINF package count is
+	 * one higher than the SQTY reported value, allocate 1 entry extra.
+	 */
+	num_sifr++;
+
 	pcc = kzalloc(sizeof(struct pcc_acpi), GFP_KERNEL);
 	if (!pcc) {
 		pr_err("Couldn't allocate mem for pcc");

[PATCH 6.6 38/91] mptcp: pm: Fix uaf in __timer_delete_sync

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Edward Adam Davis <eadavis@qq.com>

commit b4cd80b0338945a94972ac3ed54f8338d2da2076 upstream.

There are two paths to access mptcp_pm_del_add_timer, result in a race
condition:

     CPU1				CPU2
     ====                               ====
     net_rx_action
     napi_poll                          netlink_sendmsg
     __napi_poll                        netlink_unicast
     process_backlog                    netlink_unicast_kernel
     __netif_receive_skb                genl_rcv
     __netif_receive_skb_one_core       netlink_rcv_skb
     NF_HOOK                            genl_rcv_msg
     ip_local_deliver_finish            genl_family_rcv_msg
     ip_protocol_deliver_rcu            genl_family_rcv_msg_doit
     tcp_v4_rcv                         mptcp_pm_nl_flush_addrs_doit
     tcp_v4_do_rcv                      mptcp_nl_remove_addrs_list
     tcp_rcv_established                mptcp_pm_remove_addrs_and_subflows
     tcp_data_queue                     remove_anno_list_by_saddr
     mptcp_incoming_options             mptcp_pm_del_add_timer
     mptcp_pm_del_add_timer             kfree(entry)

In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).

Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".

Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf.

Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/pm_netlink.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -339,15 +339,21 @@ mptcp_pm_del_add_timer(struct mptcp_sock
 {
 	struct mptcp_pm_add_entry *entry;
 	struct sock *sk = (struct sock *)msk;
+	struct timer_list *add_timer = NULL;
 
 	spin_lock_bh(&msk->pm.lock);
 	entry = mptcp_lookup_anno_list_by_saddr(msk, addr);
-	if (entry && (!check_id || entry->addr.id == addr->id))
+	if (entry && (!check_id || entry->addr.id == addr->id)) {
 		entry->retrans_times = ADD_ADDR_RETRANS_MAX;
+		add_timer = &entry->add_timer;
+	}
+	if (!check_id && entry)
+		list_del(&entry->list);
 	spin_unlock_bh(&msk->pm.lock);
 
-	if (entry && (!check_id || entry->addr.id == addr->id))
-		sk_stop_timer_sync(sk, &entry->add_timer);
+	/* no lock, because sk_stop_timer_sync() is calling del_timer_sync() */
+	if (add_timer)
+		sk_stop_timer_sync(sk, add_timer);
 
 	return entry;
 }
@@ -1493,7 +1499,6 @@ static bool remove_anno_list_by_saddr(st
 
 	entry = mptcp_pm_del_add_timer(msk, addr, false);
 	if (entry) {
-		list_del(&entry->list);
 		kfree(entry);
 		return true;
 	}

[PATCH 6.6 39/91] selftests: mptcp: join: restrict fullmesh endp on 1st sf

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

commit 49ac6f05ace5bb0070c68a0193aa05d3c25d4c83 upstream.

A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e04482b ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.

Similar to commit d4c81bbb8600 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.

Fixes: 4878f9f8421f ("selftests: mptcp: join: validate fullmesh endp on 1st sf")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -3222,7 +3222,9 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 1 3
 		pm_nl_set_limits $ns2 1 3
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,fullmesh
+		if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
+			pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,fullmesh
+		fi
 		fullmesh=1 speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3

[PATCH 6.6 40/91] arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Schulz <quentin.schulz@cherry.de>

commit bb94a157b37ec23f53906a279320f6ed64300eba upstream.

In commit 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch
on rk3399"), an additional pinctrl state was added whose default pinmux
is for 8ch i2s0. However, Puma only has 2ch i2s0. It's been overriding
the pinctrl-0 property but the second property override was missed in
the aforementioned commit.

On Puma, a hardware slider called "BIOS Disable/Normal Boot" can disable
eMMC and SPI to force booting from SD card. Another software-controlled
GPIO is then configured to override this behavior to make eMMC and SPI
available without human intervention. This is currently done in U-Boot
and it was enough until the aforementioned commit.

Indeed, because of this additional not-yet-overridden property, this
software-controlled GPIO is now muxed in a state that does not override
this hardware slider anymore, rendering SPI and eMMC flashes unusable.

Let's override the property with the 2ch pinmux to fix this.

Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-1-4e28eadf32d0@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -374,6 +374,7 @@
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -382,8 +383,8 @@
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -391,6 +392,14 @@
 		<3 RK_PD2 1 &pcfg_pull_none>,
 		<3 RK_PD3 1 &pcfg_pull_none>,
 		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
 &io_domains {

[PATCH 6.6 41/91] arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Schulz <quentin.schulz@cherry.de>

commit 741f5ba7ccba5d7ae796dd11c320e28045524771 upstream.

The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC
and SPI flash powered-down initially (in fact it keeps the reset signal
asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so
that eMMC and SPI can be used regardless of the state of the signal.

Let's make this GPIO a hog so that it's reserved and locked in the
proper state.

At the same time, make sure the pin is reserved for the hog and cannot
be requested by another node.

Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-2-4e28eadf32d0@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi |   23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -119,6 +119,22 @@
 	drive-impedance-ohm = <33>;
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -417,9 +433,14 @@
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;

[PATCH 6.6 42/91] minmax: reduce min/max macro expansion in atomisp driver

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>

commit 7c6a3a65ace70f12b27b1a27c9a69cb791dc6e91 upstream.

Avoid unnecessary nested min()/max() which results in egregious macro
expansion.

Use clamp_t() as this introduces the least possible expansion, and turn
the {s,u}DIGIT_FITTING() macros into inline functions to avoid the
nested expansion.

This resolves an issue with slackware 15.0 32-bit compilation as
reported by Richard Narron.

Presumably the min/max fixups would be difficult to backport, this patch
should be easier and fix's Richard's problem in 5.15.

Reported-by: Richard Narron <richard@aaazen.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/
Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants")
Cc: stable@vger.kernel.org
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/media/atomisp/pci/sh_css_frac.h |   26 +++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

--- a/drivers/staging/media/atomisp/pci/sh_css_frac.h
+++ b/drivers/staging/media/atomisp/pci/sh_css_frac.h
@@ -30,12 +30,24 @@
 #define uISP_VAL_MAX		      ((unsigned int)((1 << uISP_REG_BIT) - 1))
 
 /* a:fraction bits for 16bit precision, b:fraction bits for ISP precision */
-#define sDIGIT_FITTING(v, a, b) \
-	min_t(int, max_t(int, (((v) >> sSHIFT) >> max(sFRACTION_BITS_FITTING(a) - (b), 0)), \
-	  sISP_VAL_MIN), sISP_VAL_MAX)
-#define uDIGIT_FITTING(v, a, b) \
-	min((unsigned int)max((unsigned)(((v) >> uSHIFT) \
-	>> max((int)(uFRACTION_BITS_FITTING(a) - (b)), 0)), \
-	  uISP_VAL_MIN), uISP_VAL_MAX)
+static inline int sDIGIT_FITTING(int v, int a, int b)
+{
+	int fit_shift = sFRACTION_BITS_FITTING(a) - b;
+
+	v >>= sSHIFT;
+	v >>= fit_shift > 0 ? fit_shift : 0;
+
+	return clamp_t(int, v, sISP_VAL_MIN, sISP_VAL_MAX);
+}
+
+static inline unsigned int uDIGIT_FITTING(unsigned int v, int a, int b)
+{
+	int fit_shift = uFRACTION_BITS_FITTING(a) - b;
+
+	v >>= uSHIFT;
+	v >>= fit_shift > 0 ? fit_shift : 0;
+
+	return clamp_t(unsigned int, v, uISP_VAL_MIN, uISP_VAL_MAX);
+}
 
 #endif /* __SH_CSS_FRAC_H */

[PATCH 6.6 43/91] net: tighten bad gso csum offset check in virtio_net_hdr

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <willemb@google.com>

commit 6513eb3d3191574b58859ef2d6dc26c0277c6f81 upstream.

The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.

The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.

But it is based on two incorrect assumptions:

1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.

2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.

Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.

Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/
Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/virtio_net.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -173,7 +173,8 @@ retry:
 			break;
 		case SKB_GSO_TCPV4:
 		case SKB_GSO_TCPV6:
-			if (skb->csum_offset != offsetof(struct tcphdr, check))
+			if (skb->ip_summed == CHECKSUM_PARTIAL &&
+			    skb->csum_offset != offsetof(struct tcphdr, check))
 				return -EINVAL;
 			break;
 		}

[PATCH 6.6 44/91] dm-integrity: fix a race condition when accessing recalc_sector

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit f8e1ca92e35e9041cc0a1bc226ef07a853a22de4 upstream.

There's a race condition when accessing the variable
ic->sb->recalc_sector. The function integrity_recalc writes to this
variable when it makes some progress and the function
dm_integrity_map_continue may read this variable concurrently.

One problem is that on 32-bit architectures the 64-bit variable is not
read and written atomically - it may be possible to read garbage if read
races with write.

Another problem is that memory accesses to this variable are not guarded
with memory barriers.

This commit fixes the race - it moves reading ic->sb->recalc_sector to an
earlier place where we hold &ic->endio_wait.lock.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-integrity.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -2183,6 +2183,7 @@ static void dm_integrity_map_continue(st
 	struct bio *bio = dm_bio_from_per_bio_data(dio, sizeof(struct dm_integrity_io));
 	unsigned int journal_section, journal_entry;
 	unsigned int journal_read_pos;
+	sector_t recalc_sector;
 	struct completion read_comp;
 	bool discard_retried = false;
 	bool need_sync_io = ic->internal_hash && dio->op == REQ_OP_READ;
@@ -2323,6 +2324,7 @@ offload_to_thread:
 			goto lock_retry;
 		}
 	}
+	recalc_sector = le64_to_cpu(ic->sb->recalc_sector);
 	spin_unlock_irq(&ic->endio_wait.lock);
 
 	if (unlikely(journal_read_pos != NOT_FOUND)) {
@@ -2377,7 +2379,7 @@ offload_to_thread:
 	if (need_sync_io) {
 		wait_for_completion_io(&read_comp);
 		if (ic->sb->flags & cpu_to_le32(SB_FLAG_RECALCULATING) &&
-		    dio->range.logical_sector + dio->range.n_sectors > le64_to_cpu(ic->sb->recalc_sector))
+		    dio->range.logical_sector + dio->range.n_sectors > recalc_sector)
 			goto skip_check;
 		if (ic->mode == 'B') {
 			if (!block_bitmap_op(ic, ic->recalc_bitmap, dio->range.logical_sector,

[PATCH 6.6 45/91] x86/hyperv: fix kexec crash due to VP assist page corruption

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>

commit b9af6418279c4cf73ca073f8ea024992b38be8ab upstream.

commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.

cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").

Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state().

Cc: stable@vger.kernel.org
Fixes: 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline")
Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240828112158.3538342-1-anirudh@anirudhrb.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240828112158.3538342-1-anirudh@anirudhrb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/hyperv/hv_init.c       |    5 +----
 arch/x86/include/asm/mshyperv.h |    1 -
 arch/x86/kernel/cpu/mshyperv.c  |    4 ++--
 3 files changed, 3 insertions(+), 7 deletions(-)

--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -35,7 +35,6 @@
 #include <clocksource/hyperv_timer.h>
 #include <linux/highmem.h>
 
-int hyperv_init_cpuhp;
 u64 hv_current_partition_id = ~0ull;
 EXPORT_SYMBOL_GPL(hv_current_partition_id);
 
@@ -607,8 +606,6 @@ skip_hypercall_pg_init:
 
 	register_syscore_ops(&hv_syscore_ops);
 
-	hyperv_init_cpuhp = cpuhp;
-
 	if (cpuid_ebx(HYPERV_CPUID_FEATURES) & HV_ACCESS_PARTITION_ID)
 		hv_get_partition_id();
 
@@ -637,7 +634,7 @@ skip_hypercall_pg_init:
 clean_guest_os_id:
 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
 	hv_ivm_msr_write(HV_X64_MSR_GUEST_OS_ID, 0);
-	cpuhp_remove_state(cpuhp);
+	cpuhp_remove_state(CPUHP_AP_HYPERV_ONLINE);
 free_ghcb_page:
 	free_percpu(hv_ghcb_pg);
 free_vp_assist_page:
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -40,7 +40,6 @@ static inline unsigned char hv_get_nmi_r
 }
 
 #if IS_ENABLED(CONFIG_HYPERV)
-extern int hyperv_init_cpuhp;
 extern bool hyperv_paravisor_present;
 
 extern void *hv_hypercall_pg;
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -199,8 +199,8 @@ static void hv_machine_shutdown(void)
 	 * Call hv_cpu_die() on all the CPUs, otherwise later the hypervisor
 	 * corrupts the old VP Assist Pages and can crash the kexec kernel.
 	 */
-	if (kexec_in_progress && hyperv_init_cpuhp > 0)
-		cpuhp_remove_state(hyperv_init_cpuhp);
+	if (kexec_in_progress)
+		cpuhp_remove_state(CPUHP_AP_HYPERV_ONLINE);
 
 	/* The function calls stop_other_cpus(). */
 	native_machine_shutdown();

[PATCH 6.6 46/91] mm: avoid leaving partial pfn mappings around in error case

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 79a61cc3fc0466ad2b7b89618a6157785f0293b3 upstream.

As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.

That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors.  Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.

In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.

To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/memory.c |   27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2424,11 +2424,7 @@ static inline int remap_p4d_range(struct
 	return 0;
 }
 
-/*
- * Variant of remap_pfn_range that does not call track_pfn_remap.  The caller
- * must have pre-validated the caching bits of the pgprot_t.
- */
-int remap_pfn_range_notrack(struct vm_area_struct *vma, unsigned long addr,
+static int remap_pfn_range_internal(struct vm_area_struct *vma, unsigned long addr,
 		unsigned long pfn, unsigned long size, pgprot_t prot)
 {
 	pgd_t *pgd;
@@ -2481,6 +2477,27 @@ int remap_pfn_range_notrack(struct vm_ar
 	return 0;
 }
 
+/*
+ * Variant of remap_pfn_range that does not call track_pfn_remap.  The caller
+ * must have pre-validated the caching bits of the pgprot_t.
+ */
+int remap_pfn_range_notrack(struct vm_area_struct *vma, unsigned long addr,
+		unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	int error = remap_pfn_range_internal(vma, addr, pfn, size, prot);
+
+	if (!error)
+		return 0;
+
+	/*
+	 * A partial pfn range mapping is dangerous: it does not
+	 * maintain page reference counts, and callers may free
+	 * pages due to the error. So zap it early.
+	 */
+	zap_page_range_single(vma, addr, size, NULL);
+	return error;
+}
+
 /**
  * remap_pfn_range - remap kernel memory to userspace
  * @vma: user vma to map to

[PATCH 6.6 47/91] net: xilinx: axienet: Fix race in axienet_stop

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Anderson <sean.anderson@linux.dev>

commit 858430db28a5f5a11f8faa3a6fa805438e6f0851 upstream.

axienet_dma_err_handler can race with axienet_stop in the following
manner:

CPU 1                       CPU 2
======================      ==================
axienet_stop()
    napi_disable()
    axienet_dma_stop()
                            axienet_dma_err_handler()
                                napi_disable()
                                axienet_dma_stop()
                                axienet_dma_start()
                                napi_enable()
    cancel_work_sync()
    free_irq()

Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjusted to apply before dmaengine support ]
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h      |    3 +++
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c |    8 ++++++++
 2 files changed, 11 insertions(+)

--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -419,6 +419,8 @@ struct axidma_bd {
  * @tx_bytes:	TX byte count for statistics
  * @tx_stat_sync: Synchronization object for TX stats
  * @dma_err_task: Work structure to process Axi DMA errors
+ * @stopping:   Set when @dma_err_task shouldn't do anything because we are
+ *              about to stop the device.
  * @tx_irq:	Axidma TX IRQ number
  * @rx_irq:	Axidma RX IRQ number
  * @eth_irq:	Ethernet core IRQ number
@@ -481,6 +483,7 @@ struct axienet_local {
 	struct u64_stats_sync tx_stat_sync;
 
 	struct work_struct dma_err_task;
+	bool stopping;
 
 	int tx_irq;
 	int rx_irq;
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1162,6 +1162,7 @@ static int axienet_open(struct net_devic
 	phylink_start(lp->phylink);
 
 	/* Enable worker thread for Axi DMA error handling */
+	lp->stopping = false;
 	INIT_WORK(&lp->dma_err_task, axienet_dma_err_handler);
 
 	napi_enable(&lp->napi_rx);
@@ -1217,6 +1218,9 @@ static int axienet_stop(struct net_devic
 
 	dev_dbg(&ndev->dev, "axienet_close()\n");
 
+	WRITE_ONCE(lp->stopping, true);
+	flush_work(&lp->dma_err_task);
+
 	napi_disable(&lp->napi_tx);
 	napi_disable(&lp->napi_rx);
 
@@ -1761,6 +1765,10 @@ static void axienet_dma_err_handler(stru
 						dma_err_task);
 	struct net_device *ndev = lp->ndev;
 
+	/* Don't bother if we are going to stop anyway */
+	if (READ_ONCE(lp->stopping))
+		return;
+
 	napi_disable(&lp->napi_tx);
 	napi_disable(&lp->napi_rx);
 

[PATCH 6.6 48/91] arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: FUKAUMI Naoki <naoki@radxa.com>

[ Upstream commit c623e9daf60a0275d623ce054601550e54987f5b ]

use GPIO0_A2 as PMIC interrupt pin in pinctrl.
(I forgot to fix this part in previous commit.)

Fixes: 02afd3d5b9fa ("arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240722095216.1656081-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index d9905a08c6ce..66443d52cd34 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -332,7 +332,7 @@ led_pin: led-pin {
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-- 
2.43.0

[PATCH 6.6 49/91] drm/amd/display: Disable error correction if its not supported

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cruise <cruise.hung@amd.com>

[ Upstream commit a8ac994cf0693a1ce59410995594e56124a1c79f ]

[Why]
Error correction was enabled in a monitor which doesn't support.

[How]
Disable error correction if it's not supported

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Cruise <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: a8baec4623ae ("drm/amd/display: Fix FEC_READY write on DP LT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/dc/link/protocols/link_dp_phy.c   | 47 +++++++++----------
 1 file changed, 21 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c
index 0050e0a06cbc..f06f708ba5c8 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c
@@ -143,32 +143,27 @@ enum dc_status dp_set_fec_ready(struct dc_link *link, const struct link_resource
 
 	link_enc = link_enc_cfg_get_link_enc(link);
 	ASSERT(link_enc);
+	if (link_enc->funcs->fec_set_ready == NULL)
+		return DC_NOT_SUPPORTED;
 
-	if (!dp_should_enable_fec(link))
-		return status;
-
-	if (link_enc->funcs->fec_set_ready &&
-			link->dpcd_caps.fec_cap.bits.FEC_CAPABLE) {
-		if (ready) {
+	if (ready && dp_should_enable_fec(link)) {
+		if (link->fec_state == dc_link_fec_not_ready) {
 			fec_config = 1;
-			status = core_link_write_dpcd(link,
-					DP_FEC_CONFIGURATION,
-					&fec_config,
-					sizeof(fec_config));
+
+			status = core_link_write_dpcd(link, DP_FEC_CONFIGURATION,
+					&fec_config, sizeof(fec_config));
+
 			if (status == DC_OK) {
 				link_enc->funcs->fec_set_ready(link_enc, true);
 				link->fec_state = dc_link_fec_ready;
-			} else {
-				link_enc->funcs->fec_set_ready(link_enc, false);
-				link->fec_state = dc_link_fec_not_ready;
-				dm_error("dpcd write failed to set fec_ready");
 			}
-		} else if (link->fec_state == dc_link_fec_ready) {
+		}
+	} else {
+		if (link->fec_state == dc_link_fec_ready) {
 			fec_config = 0;
-			status = core_link_write_dpcd(link,
-					DP_FEC_CONFIGURATION,
-					&fec_config,
-					sizeof(fec_config));
+			core_link_write_dpcd(link, DP_FEC_CONFIGURATION,
+				&fec_config, sizeof(fec_config));
+
 			link_enc->funcs->fec_set_ready(link_enc, false);
 			link->fec_state = dc_link_fec_not_ready;
 		}
@@ -183,14 +178,12 @@ void dp_set_fec_enable(struct dc_link *link, bool enable)
 
 	link_enc = link_enc_cfg_get_link_enc(link);
 	ASSERT(link_enc);
-
-	if (!dp_should_enable_fec(link))
+	if (link_enc->funcs->fec_set_enable == NULL)
 		return;
 
-	if (link_enc->funcs->fec_set_enable &&
-			link->dpcd_caps.fec_cap.bits.FEC_CAPABLE) {
-		if (link->fec_state == dc_link_fec_ready && enable) {
-			/* Accord to DP spec, FEC enable sequence can first
+	if (enable && dp_should_enable_fec(link)) {
+		if (link->fec_state == dc_link_fec_ready) {
+			/* According to DP spec, FEC enable sequence can first
 			 * be transmitted anytime after 1000 LL codes have
 			 * been transmitted on the link after link training
 			 * completion. Using 1 lane RBR should have the maximum
@@ -200,7 +193,9 @@ void dp_set_fec_enable(struct dc_link *link, bool enable)
 			udelay(7);
 			link_enc->funcs->fec_set_enable(link_enc, true);
 			link->fec_state = dc_link_fec_enabled;
-		} else if (link->fec_state == dc_link_fec_enabled && !enable) {
+		}
+	} else {
+		if (link->fec_state == dc_link_fec_enabled) {
 			link_enc->funcs->fec_set_enable(link_enc, false);
 			link->fec_state = dc_link_fec_ready;
 		}
-- 
2.43.0

[PATCH 6.6 50/91] drm/amd/display: Fix FEC_READY write on DP LT

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Bakoulin <ilya.bakoulin@amd.com>

[ Upstream commit a8baec4623aedf36d50767627f6eae5ebf07c6fb ]

[Why/How]
We can miss writing FEC_READY in some cases before LT start, which
violates DP spec. Remove the condition guarding the DPCD write so that
the write happens unconditionally.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/dc/link/protocols/link_dp_phy.c    | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c
index f06f708ba5c8..9bde0c8bf914 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_phy.c
@@ -147,16 +147,14 @@ enum dc_status dp_set_fec_ready(struct dc_link *link, const struct link_resource
 		return DC_NOT_SUPPORTED;
 
 	if (ready && dp_should_enable_fec(link)) {
-		if (link->fec_state == dc_link_fec_not_ready) {
-			fec_config = 1;
+		fec_config = 1;
 
-			status = core_link_write_dpcd(link, DP_FEC_CONFIGURATION,
-					&fec_config, sizeof(fec_config));
+		status = core_link_write_dpcd(link, DP_FEC_CONFIGURATION,
+				&fec_config, sizeof(fec_config));
 
-			if (status == DC_OK) {
-				link_enc->funcs->fec_set_ready(link_enc, true);
-				link->fec_state = dc_link_fec_ready;
-			}
+		if (status == DC_OK) {
+			link_enc->funcs->fec_set_ready(link_enc, true);
+			link->fec_state = dc_link_fec_ready;
 		}
 	} else {
 		if (link->fec_state == dc_link_fec_ready) {
-- 
2.43.0

[PATCH 6.6 51/91] eeprom: digsy_mtc: Fix 93xx46 driver probe failure

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 2b82641ad0620b2d71dc05024b20f82db7e1c0b6 ]

The update to support other (bigger) types of EEPROMs broke
the driver loading due to removal of the default size.

Fix this by adding the respective (new) flag to the platform data.

Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/eeprom/digsy_mtc_eeprom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
index f1f766b70965..4eddc5ba1af9 100644
--- a/drivers/misc/eeprom/digsy_mtc_eeprom.c
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -42,7 +42,7 @@ static void digsy_mtc_op_finish(void *p)
 }
 
 struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
-	.flags		= EE_ADDR8,
+	.flags		= EE_ADDR8 | EE_SIZE1K,
 	.prepare	= digsy_mtc_op_prepare,
 	.finish		= digsy_mtc_op_finish,
 };
-- 
2.43.0

[PATCH 6.6 52/91] cxl/core: Fix incorrect vendor debug UUID define

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: peng guo <engguopeng@buaa.edu.cn>

[ Upstream commit 8ecef8e01a08c7e3e4ffc8f08d9f9663984f334b ]

When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.

All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86

Refer to CXL spec r3.1 Table 8-71

Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.

Fixes: 472b1ce6e9d6 ("cxl/mem: Enable commands via CEL")
Signed-off-by: peng guo <engguopeng@buaa.edu.cn>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240710023112.8063-1-engguopeng@buaa.edu.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cxl/cxlmem.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 59c7f88b915a..edb46123e3eb 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -538,7 +538,7 @@ enum cxl_opcode {
 		  0x3b, 0x3f, 0x17)
 
 #define DEFINE_CXL_VENDOR_DEBUG_UUID                                           \
-	UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19,     \
+	UUID_INIT(0x5e1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19,     \
 		  0x40, 0x3d, 0x86)
 
 struct cxl_mbox_get_supported_logs {
-- 
2.43.0

[PATCH 6.6 53/91] selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Luczaj <mhal@rbox.co>

[ Upstream commit 1b0ad43177c097d38b967b99c2b71d8be28b0223 ]

Function ignores the AF_UNIX socket type argument, SOCK_DGRAM is hardcoded.
Fix to respect the argument provided.

Fixes: 75e0e27db6cf ("selftest/bpf: Change udp to inet in some function names")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-3-mhal@rbox.co
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/sockmap_listen.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c
index 8df8cbb447f1..84d59419e4eb 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c
@@ -1841,7 +1841,7 @@ static void unix_inet_redir_to_connected(int family, int type, int sock_mapfd,
 	if (err)
 		return;
 
-	if (socketpair(AF_UNIX, SOCK_DGRAM | SOCK_NONBLOCK, 0, sfd))
+	if (socketpair(AF_UNIX, type | SOCK_NONBLOCK, 0, sfd))
 		goto close_cli0;
 	c1 = sfd[0], p1 = sfd[1];
 
@@ -1876,7 +1876,6 @@ static void unix_inet_redir_to_connected(int family, int type, int sock_mapfd,
 close_cli0:
 	xclose(c0);
 	xclose(p0);
-
 }
 
 static void unix_inet_skb_redir_to_connected(struct test_sockmap_listen *skel,
-- 
2.43.0

[PATCH 6.6 54/91] hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patryk Biel <pbiel7@gmail.com>

[ Upstream commit 20471071f198c8626dbe3951ac9834055b387844 ]

The current implementation of pmbus_show_boolean assumes that all devices
support write-back operation of status register to clear pending warnings
or faults. Since clearing individual bits in the status registers was only
introduced in PMBus specification 1.2, this operation may not be supported
by some older devices. This can result in an error while reading boolean
attributes such as temp1_max_alarm.

Fetch PMBus revision supported by the device and modify pmbus_show_boolean
so that it only tries to clear individual status bits if the device is
compliant with PMBus specs >= 1.2. Otherwise clear all fault indicators
on the current page after a fault status was reported.

Fixes: 35f165f08950a ("hwmon: (pmbus) Clear pmbus fault/warning bits after read")
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
Message-ID: <20240909-pmbus-status-reg-clearing-v1-1-f1c0d68c6408@gmail.com>
[groeck:
 Rewrote description
 Moved revision detection code ahead of clear faults command
 Assigned revision if return value from PMBUS_REVISION command is 0
 Improved return value check from calling _pmbus_write_byte_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pmbus/pmbus.h      |  6 ++++++
 drivers/hwmon/pmbus/pmbus_core.c | 17 ++++++++++++++---
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index b0832a4c690d..76c2b364c3fe 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -409,6 +409,12 @@ enum pmbus_sensor_classes {
 enum pmbus_data_format { linear = 0, ieee754, direct, vid };
 enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
 
+/* PMBus revision identifiers */
+#define PMBUS_REV_10 0x00	/* PMBus revision 1.0 */
+#define PMBUS_REV_11 0x11	/* PMBus revision 1.1 */
+#define PMBUS_REV_12 0x22	/* PMBus revision 1.2 */
+#define PMBUS_REV_13 0x33	/* PMBus revision 1.3 */
+
 struct pmbus_driver_info {
 	int pages;		/* Total number of pages */
 	u8 phases[PMBUS_PAGES];	/* Number of phases per page */
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 1363d9f89181..728c07c42651 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -85,6 +85,8 @@ struct pmbus_data {
 
 	u32 flags;		/* from platform data */
 
+	u8 revision;	/* The PMBus revision the device is compliant with */
+
 	int exponent[PMBUS_PAGES];
 				/* linear mode: exponent for output voltages */
 
@@ -1095,9 +1097,14 @@ static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b,
 
 	regval = status & mask;
 	if (regval) {
-		ret = _pmbus_write_byte_data(client, page, reg, regval);
-		if (ret)
-			goto unlock;
+		if (data->revision >= PMBUS_REV_12) {
+			ret = _pmbus_write_byte_data(client, page, reg, regval);
+			if (ret)
+				goto unlock;
+		} else {
+			pmbus_clear_fault_page(client, page);
+		}
+
 	}
 	if (s1 && s2) {
 		s64 v1, v2;
@@ -2640,6 +2647,10 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 			data->flags |= PMBUS_WRITE_PROTECTED | PMBUS_SKIP_STATUS_CHECK;
 	}
 
+	ret = i2c_smbus_read_byte_data(client, PMBUS_REVISION);
+	if (ret >= 0)
+		data->revision = ret;
+
 	if (data->info->pages)
 		pmbus_clear_faults(client);
 	else
-- 
2.43.0

[PATCH 6.6 55/91] ice: Fix lldp packets dropping after changing the number of channels

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>

[ Upstream commit 9debb703e14939dfafa5d403f27c4feb2e9f6501 ]

After vsi setup refactor commit 6624e780a577 ("ice: split ice_vsi_setup
into smaller functions") ice_cfg_sw_lldp function which removes rx rule
directing LLDP packets to vsi is moved from ice_vsi_release to
ice_vsi_decfg function. ice_vsi_decfg is used in more cases than just in
vsi_release resulting in unnecessary removal of rx lldp packets handling
switch rule. This leads to lldp packets being dropped after a change number
of channels via ethtool.
This patch moves ice_cfg_sw_lldp function that removes rx lldp sw rule back
to ice_vsi_release function.

Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Matěj Grégr <mgregr@netx.as>
Closes: https://lore.kernel.org/intel-wired-lan/1be45a76-90af-4813-824f-8398b69745a9@netx.as/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_lib.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index b3010a53f1b4..3a0ef56d3edc 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2600,13 +2600,6 @@ void ice_vsi_decfg(struct ice_vsi *vsi)
 	struct ice_pf *pf = vsi->back;
 	int err;
 
-	/* The Rx rule will only exist to remove if the LLDP FW
-	 * engine is currently stopped
-	 */
-	if (!ice_is_safe_mode(pf) && vsi->type == ICE_VSI_PF &&
-	    !test_bit(ICE_FLAG_FW_LLDP_AGENT, pf->flags))
-		ice_cfg_sw_lldp(vsi, false, false);
-
 	ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
 	err = ice_rm_vsi_rdma_cfg(vsi->port_info, vsi->idx);
 	if (err)
@@ -2953,6 +2946,14 @@ int ice_vsi_release(struct ice_vsi *vsi)
 		ice_rss_clean(vsi);
 
 	ice_vsi_close(vsi);
+
+	/* The Rx rule will only exist to remove if the LLDP FW
+	 * engine is currently stopped
+	 */
+	if (!ice_is_safe_mode(pf) && vsi->type == ICE_VSI_PF &&
+	    !test_bit(ICE_FLAG_FW_LLDP_AGENT, pf->flags))
+		ice_cfg_sw_lldp(vsi, false, false);
+
 	ice_vsi_decfg(vsi);
 
 	/* retain SW VSI data structure since it is needed to unregister and
-- 
2.43.0

[PATCH 6.6 56/91] ice: fix accounting for filters shared by multiple VSIs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ]

When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.

This logic works correctly for the case where only a single VSI has added a
given switch filter.

When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.

The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.

However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.

This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.

In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.

Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.

Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_switch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 88ee2491312a..1b48fa8c435d 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -3072,7 +3072,7 @@ ice_add_update_vsi_list(struct ice_hw *hw,
 
 		/* A rule already exists with the new VSI being added */
 		if (test_bit(vsi_handle, m_entry->vsi_list_info->vsi_map))
-			return 0;
+			return -EEXIST;
 
 		/* Update the previously created VSI list set with
 		 * the new VSI ID passed in
-- 
2.43.0

[PATCH 6.6 57/91] ice: fix VSI lists confusion when adding VLANs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Schmidt <mschmidt@redhat.com>

[ Upstream commit d2940002b0aa42898de815a1453b29d440292386 ]

The description of function ice_find_vsi_list_entry says:
  Search VSI list map with VSI count 1

However, since the blamed commit (see Fixes below), the function no
longer checks vsi_count. This causes a problem in ice_add_vlan_internal,
where the decision to share VSI lists between filter rules relies on the
vsi_count of the found existing VSI list being 1.

The reproducing steps:
1. Have a PF and two VFs.
   There will be a filter rule for VLAN 0, referring to a VSI list
   containing VSIs: 0 (PF), 2 (VF#0), 3 (VF#1).
2. Add VLAN 1234 to VF#0.
   ice will make the wrong decision to share the VSI list with the new
   rule. The wrong behavior may not be immediately apparent, but it can
   be observed with debug prints.
3. Add VLAN 1234 to VF#1.
   ice will unshare the VSI list for the VLAN 1234 rule. Due to the
   earlier bad decision, the newly created VSI list will contain
   VSIs 0 (PF) and 3 (VF#1), instead of expected 2 (VF#0) and 3 (VF#1).
4. Try pinging a network peer over the VLAN interface on VF#0.
   This fails.

Reproducer script at:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/test-vlan-vsi-list-confusion.sh
Commented debug trace:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/ice-vlan-vsi-lists-debug.txt
Patch adding the debug prints:
https://gitlab.com/mschmidt2/linux/-/commit/f8a8814623944a45091a77c6094c40bfe726bfdb
(Unsafe, by the way. Lacks rule_lock when dumping in ice_remove_vlan.)

Michal Swiatkowski added to the explanation that the bug is caused by
reusing a VSI list created for VLAN 0. All created VFs' VSIs are added
to VLAN 0 filter. When a non-zero VLAN is created on a VF which is already
in VLAN 0 (normal case), the VSI list from VLAN 0 is reused.
It leads to a problem because all VFs (VSIs to be specific) that are
subscribed to VLAN 0 will now receive a new VLAN tag traffic. This is
one bug, another is the bug described above. Removing filters from
one VF will remove VLAN filter from the previous VF. It happens a VF is
reset. Example:
- creation of 3 VFs
- we have VSI list (used for VLAN 0) [0 (pf), 2 (vf1), 3 (vf2), 4 (vf3)]
- we are adding VLAN 100 on VF1, we are reusing the previous list
  because 2 is there
- VLAN traffic works fine, but VLAN 100 tagged traffic can be received
  on all VSIs from the list (for example broadcast or unicast)
- trust is turning on VF2, VF2 is resetting, all filters from VF2 are
  removed; the VLAN 100 filter is also removed because 3 is on the list
- VLAN traffic to VF1 isn't working anymore, there is a need to recreate
  VLAN interface to readd VLAN filter

One thing I'm not certain about is the implications for the LAG feature,
which is another caller of ice_find_vsi_list_entry. I don't have a
LAG-capable card at hand to test.

Fixes: 23ccae5ce15f ("ice: changes to the interface with the HW and FW for SRIOV_VF+LAG")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Dave Ertman <David.m.ertman@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_switch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 1b48fa8c435d..355716e6bcc8 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -3142,7 +3142,7 @@ ice_find_vsi_list_entry(struct ice_hw *hw, u8 recp_id, u16 vsi_handle,
 
 	list_head = &sw->recp_list[recp_id].filt_rules;
 	list_for_each_entry(list_itr, list_head, list_entry) {
-		if (list_itr->vsi_list_info) {
+		if (list_itr->vsi_count == 1 && list_itr->vsi_list_info) {
 			map_info = list_itr->vsi_list_info;
 			if (test_bit(vsi_handle, map_info->vsi_map)) {
 				*vsi_list_id = map_info->vsi_list_id;
-- 
2.43.0

[PATCH 6.6 58/91] igb: Always call igb_xdp_ring_update_tail() under Tx lock

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sriram Yagnaraman <sriram.yagnaraman@est.tech>

[ Upstream commit 27717f8b17c098c4373ddb8fe89e1a1899c7779d ]

Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment
and lockdep assert to indicate that. This is needed to share the same TX
ring between XDP, XSK and slow paths. Furthermore, the current XDP
implementation is racy on tail updates.

Fixes: 9cbc948b5a20 ("igb: add XDP support")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add lockdep assert and fixes tag]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index fa268d7bd1bc..986bcbf0a6ab 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -33,6 +33,7 @@
 #include <linux/bpf_trace.h>
 #include <linux/pm_runtime.h>
 #include <linux/etherdevice.h>
+#include <linux/lockdep.h>
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
@@ -2939,8 +2940,11 @@ static int igb_xdp(struct net_device *dev, struct netdev_bpf *xdp)
 	}
 }
 
+/* This function assumes __netif_tx_lock is held by the caller. */
 static void igb_xdp_ring_update_tail(struct igb_ring *ring)
 {
+	lockdep_assert_held(&txring_txq(ring)->_xmit_lock);
+
 	/* Force memory writes to complete before letting h/w know there
 	 * are new descriptors to fetch.
 	 */
@@ -3025,11 +3029,11 @@ static int igb_xdp_xmit(struct net_device *dev, int n,
 		nxmit++;
 	}
 
-	__netif_tx_unlock(nq);
-
 	if (unlikely(flags & XDP_XMIT_FLUSH))
 		igb_xdp_ring_update_tail(tx_ring);
 
+	__netif_tx_unlock(nq);
+
 	return nxmit;
 }
 
@@ -8889,12 +8893,14 @@ static void igb_put_rx_buffer(struct igb_ring *rx_ring,
 
 static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 {
+	unsigned int total_bytes = 0, total_packets = 0;
 	struct igb_adapter *adapter = q_vector->adapter;
 	struct igb_ring *rx_ring = q_vector->rx.ring;
-	struct sk_buff *skb = rx_ring->skb;
-	unsigned int total_bytes = 0, total_packets = 0;
 	u16 cleaned_count = igb_desc_unused(rx_ring);
+	struct sk_buff *skb = rx_ring->skb;
+	int cpu = smp_processor_id();
 	unsigned int xdp_xmit = 0;
+	struct netdev_queue *nq;
 	struct xdp_buff xdp;
 	u32 frame_sz = 0;
 	int rx_buf_pgcnt;
@@ -9022,7 +9028,10 @@ static int igb_clean_rx_irq(struct igb_q_vector *q_vector, const int budget)
 	if (xdp_xmit & IGB_XDP_TX) {
 		struct igb_ring *tx_ring = igb_xdp_tx_queue_mapping(adapter);
 
+		nq = txring_txq(tx_ring);
+		__netif_tx_lock(nq, cpu);
 		igb_xdp_ring_update_tail(tx_ring);
+		__netif_tx_unlock(nq);
 	}
 
 	u64_stats_update_begin(&rx_ring->rx_syncp);
-- 
2.43.0

[PATCH 6.6 59/91] net/mlx5: Update the list of the PCI supported devices

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maher Sanalla <msanalla@nvidia.com>

[ Upstream commit 7472d157cb8014103105433bcc0705af2e6f7184 ]

Add the upcoming ConnectX-9 device ID to the table of supported
PCI device IDs.

Fixes: f908a35b2218 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 11f11248feb8..96136229b1b0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -2205,6 +2205,7 @@ static const struct pci_device_id mlx5_core_pci_table[] = {
 	{ PCI_VDEVICE(MELLANOX, 0x101f) },			/* ConnectX-6 LX */
 	{ PCI_VDEVICE(MELLANOX, 0x1021) },			/* ConnectX-7 */
 	{ PCI_VDEVICE(MELLANOX, 0x1023) },			/* ConnectX-8 */
+	{ PCI_VDEVICE(MELLANOX, 0x1025) },			/* ConnectX-9 */
 	{ PCI_VDEVICE(MELLANOX, 0xa2d2) },			/* BlueField integrated ConnectX-5 network controller */
 	{ PCI_VDEVICE(MELLANOX, 0xa2d3), MLX5_PCI_DEV_IS_VF},	/* BlueField integrated ConnectX-5 network controller VF */
 	{ PCI_VDEVICE(MELLANOX, 0xa2d6) },			/* BlueField-2 integrated ConnectX-6 Dx network controller */
-- 
2.43.0

[PATCH 6.6 60/91] net/mlx5e: Add missing link modes to ptys2ethtool_map

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shahar Shitrit <shshitrit@nvidia.com>

[ Upstream commit 7617d62cba4a8a3ff3ed3fda0171c43f135c142e ]

Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy
modes in ptys2legacy_ethtool_table, since they were missing.

Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 50db127e6371..f973314b1724 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -136,6 +136,10 @@ void mlx5e_build_ptys2ethtool_map(void)
 				       ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT);
 	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GBASE_LR4, legacy,
 				       ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT);
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100BASE_TX, legacy,
+				       ETHTOOL_LINK_MODE_100baseT_Full_BIT);
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_1000BASE_T, legacy,
+				       ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
 	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_10GBASE_T, legacy,
 				       ETHTOOL_LINK_MODE_10000baseT_Full_BIT);
 	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_25GBASE_CR, legacy,
-- 
2.43.0

[PATCH 6.6 61/91] IB/mlx5: Rename 400G_8X speed to comply to naming convention

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrisious Haddad <phaddad@nvidia.com>

[ Upstream commit b28ad32442bec2f0d9cb660d7d698a1a53c13d08 ]

Rename 400G_8X speed to comply to naming convention.

Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/ac98447cac8379a43fbdb36d56e5fb2b741a97ff.1695204156.git.leon@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 80bf474242b2 ("net/mlx5e: Add missing link mode to ptys2ext_ethtool_map")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c              | 2 +-
 drivers/net/ethernet/mellanox/mlx5/core/port.c | 2 +-
 include/linux/mlx5/port.h                      | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 45a497c0258b..2d179bc56ce6 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -444,7 +444,7 @@ static int translate_eth_ext_proto_oper(u32 eth_proto_oper, u16 *active_speed,
 		*active_width = IB_WIDTH_2X;
 		*active_speed = IB_SPEED_NDR;
 		break;
-	case MLX5E_PROT_MASK(MLX5E_400GAUI_8):
+	case MLX5E_PROT_MASK(MLX5E_400GAUI_8_400GBASE_CR8):
 		*active_width = IB_WIDTH_8X;
 		*active_speed = IB_SPEED_HDR;
 		break;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index be70d1f23a5d..749f0fc2c189 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -1098,7 +1098,7 @@ static const u32 mlx5e_ext_link_speed[MLX5E_EXT_LINK_MODES_NUMBER] = {
 	[MLX5E_CAUI_4_100GBASE_CR4_KR4] = 100000,
 	[MLX5E_100GAUI_2_100GBASE_CR2_KR2] = 100000,
 	[MLX5E_200GAUI_4_200GBASE_CR4_KR4] = 200000,
-	[MLX5E_400GAUI_8] = 400000,
+	[MLX5E_400GAUI_8_400GBASE_CR8] = 400000,
 	[MLX5E_100GAUI_1_100GBASE_CR_KR] = 100000,
 	[MLX5E_200GAUI_2_200GBASE_CR2_KR2] = 200000,
 	[MLX5E_400GAUI_4_400GBASE_CR4_KR4] = 400000,
diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h
index 98b2e1e149f9..5cc34216f23c 100644
--- a/include/linux/mlx5/port.h
+++ b/include/linux/mlx5/port.h
@@ -115,7 +115,7 @@ enum mlx5e_ext_link_mode {
 	MLX5E_100GAUI_1_100GBASE_CR_KR		= 11,
 	MLX5E_200GAUI_4_200GBASE_CR4_KR4	= 12,
 	MLX5E_200GAUI_2_200GBASE_CR2_KR2	= 13,
-	MLX5E_400GAUI_8				= 15,
+	MLX5E_400GAUI_8_400GBASE_CR8		= 15,
 	MLX5E_400GAUI_4_400GBASE_CR4_KR4	= 16,
 	MLX5E_EXT_LINK_MODES_NUMBER,
 };
-- 
2.43.0

[PATCH 6.6 62/91] net/mlx5e: Add missing link mode to ptys2ext_ethtool_map

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shahar Shitrit <shshitrit@nvidia.com>

[ Upstream commit 80bf474242b21d64a514fd2bb65faa7a17ca8d8d ]

Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes
in ptys2ext_ethtool_table, since it was missing.

Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index f973314b1724..54379297a748 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -205,6 +205,12 @@ void mlx5e_build_ptys2ethtool_map(void)
 				       ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT,
 				       ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT,
 				       ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT);
+	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_400GAUI_8_400GBASE_CR8, ext,
+				       ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT,
+				       ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT,
+				       ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT,
+				       ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT,
+				       ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT);
 	MLX5_BUILD_PTYS2ETHTOOL_CONFIG(MLX5E_100GAUI_1_100GBASE_CR_KR, ext,
 				       ETHTOOL_LINK_MODE_100000baseKR_Full_BIT,
 				       ETHTOOL_LINK_MODE_100000baseSR_Full_BIT,
-- 
2.43.0

[PATCH 6.6 63/91] net/mlx5: Explicitly set scheduling element and TSAR type

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carolina Jubran <cjubran@nvidia.com>

[ Upstream commit c88146abe4d0f8cf659b2b8883fdc33936d2e3b8 ]

Ensure the scheduling element type and TSAR type are explicitly
initialized in the QoS rate group creation.

This prevents potential issues due to default values.

Fixes: 1ae258f8b343 ("net/mlx5: E-switch, Introduce rate limiting groups API")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
index 1887a24ee414..627cdb072573 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
@@ -420,6 +420,7 @@ __esw_qos_create_rate_group(struct mlx5_eswitch *esw, struct netlink_ext_ack *ex
 {
 	u32 tsar_ctx[MLX5_ST_SZ_DW(scheduling_context)] = {};
 	struct mlx5_esw_rate_group *group;
+	__be32 *attr;
 	u32 divider;
 	int err;
 
@@ -427,6 +428,12 @@ __esw_qos_create_rate_group(struct mlx5_eswitch *esw, struct netlink_ext_ack *ex
 	if (!group)
 		return ERR_PTR(-ENOMEM);
 
+	MLX5_SET(scheduling_context, tsar_ctx, element_type,
+		 SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR);
+
+	attr = MLX5_ADDR_OF(scheduling_context, tsar_ctx, element_attributes);
+	*attr = cpu_to_be32(TSAR_ELEMENT_TSAR_TYPE_DWRR << 16);
+
 	MLX5_SET(scheduling_context, tsar_ctx, parent_element_id,
 		 esw->qos.root_tsar_ix);
 	err = mlx5_create_scheduling_element_cmd(esw->dev,
-- 
2.43.0

[PATCH 6.6 64/91] net/mlx5: Add missing masks and QoS bit masks for scheduling elements

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carolina Jubran <cjubran@nvidia.com>

[ Upstream commit 452ef7f86036392005940de54228d42ca0044192 ]

Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.

Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.

Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/mlx5_ifc.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 3d1cd726df34..0e20d7109028 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1010,7 +1010,8 @@ struct mlx5_ifc_qos_cap_bits {
 
 	u8         max_tsar_bw_share[0x20];
 
-	u8         reserved_at_100[0x20];
+	u8         nic_element_type[0x10];
+	u8         nic_tsar_type[0x10];
 
 	u8         reserved_at_120[0x3];
 	u8         log_meter_aso_granularity[0x5];
@@ -3847,6 +3848,7 @@ enum {
 	ELEMENT_TYPE_CAP_MASK_VPORT		= 1 << 1,
 	ELEMENT_TYPE_CAP_MASK_VPORT_TC		= 1 << 2,
 	ELEMENT_TYPE_CAP_MASK_PARA_VPORT_TC	= 1 << 3,
+	ELEMENT_TYPE_CAP_MASK_QUEUE_GROUP	= 1 << 4,
 };
 
 struct mlx5_ifc_scheduling_context_bits {
@@ -4546,6 +4548,12 @@ enum {
 	TSAR_ELEMENT_TSAR_TYPE_ETS = 0x2,
 };
 
+enum {
+	TSAR_TYPE_CAP_MASK_DWRR		= 1 << 0,
+	TSAR_TYPE_CAP_MASK_ROUND_ROBIN	= 1 << 1,
+	TSAR_TYPE_CAP_MASK_ETS		= 1 << 2,
+};
+
 struct mlx5_ifc_tsar_element_bits {
 	u8         reserved_at_0[0x8];
 	u8         tsar_type[0x8];
-- 
2.43.0

[PATCH 6.6 65/91] net/mlx5: Correct TASR typo into TSAR

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cosmin Ratiu <cratiu@nvidia.com>

[ Upstream commit e575d3a6dd22123888defb622b1742aa2d45b942 ]

TSAR is the correct spelling (Transmit Scheduling ARbiter).

Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240613210036.1125203-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 861cd9b9cb62 ("net/mlx5: Verify support for scheduling element and TSAR type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c | 2 +-
 include/linux/mlx5/mlx5_ifc.h                     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
index 627cdb072573..f4cd6bb1870d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
@@ -537,7 +537,7 @@ static bool esw_qos_element_type_supported(struct mlx5_core_dev *dev, int type)
 	switch (type) {
 	case SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR:
 		return MLX5_CAP_QOS(dev, esw_element_type) &
-		       ELEMENT_TYPE_CAP_MASK_TASR;
+		       ELEMENT_TYPE_CAP_MASK_TSAR;
 	case SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT:
 		return MLX5_CAP_QOS(dev, esw_element_type) &
 		       ELEMENT_TYPE_CAP_MASK_VPORT;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 0e20d7109028..9106771bb92f 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -3844,7 +3844,7 @@ enum {
 };
 
 enum {
-	ELEMENT_TYPE_CAP_MASK_TASR		= 1 << 0,
+	ELEMENT_TYPE_CAP_MASK_TSAR		= 1 << 0,
 	ELEMENT_TYPE_CAP_MASK_VPORT		= 1 << 1,
 	ELEMENT_TYPE_CAP_MASK_VPORT_TC		= 1 << 2,
 	ELEMENT_TYPE_CAP_MASK_PARA_VPORT_TC	= 1 << 3,
-- 
2.43.0

[PATCH 6.6 66/91] net/mlx5: Verify support for scheduling element and TSAR type

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carolina Jubran <cjubran@nvidia.com>

[ Upstream commit 861cd9b9cb62feb244b8d77e68fd6ddedbbf66e9 ]

Before creating a scheduling element in a NIC or E-Switch scheduler,
ensure that the requested element type is supported. If the element is
of type Transmit Scheduling Arbiter (TSAR), also verify that the
specific TSAR type is supported.

Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand")
Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/esw/qos.c | 44 ++++++++++---------
 drivers/net/ethernet/mellanox/mlx5/core/qos.c |  7 +++
 2 files changed, 31 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
index f4cd6bb1870d..cc0f2be21a26 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c
@@ -311,6 +311,25 @@ static int esw_qos_set_group_max_rate(struct mlx5_eswitch *esw,
 	return err;
 }
 
+static bool esw_qos_element_type_supported(struct mlx5_core_dev *dev, int type)
+{
+	switch (type) {
+	case SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR:
+		return MLX5_CAP_QOS(dev, esw_element_type) &
+		       ELEMENT_TYPE_CAP_MASK_TSAR;
+	case SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT:
+		return MLX5_CAP_QOS(dev, esw_element_type) &
+		       ELEMENT_TYPE_CAP_MASK_VPORT;
+	case SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT_TC:
+		return MLX5_CAP_QOS(dev, esw_element_type) &
+		       ELEMENT_TYPE_CAP_MASK_VPORT_TC;
+	case SCHEDULING_CONTEXT_ELEMENT_TYPE_PARA_VPORT_TC:
+		return MLX5_CAP_QOS(dev, esw_element_type) &
+		       ELEMENT_TYPE_CAP_MASK_PARA_VPORT_TC;
+	}
+	return false;
+}
+
 static int esw_qos_vport_create_sched_element(struct mlx5_eswitch *esw,
 					      struct mlx5_vport *vport,
 					      u32 max_rate, u32 bw_share)
@@ -322,6 +341,9 @@ static int esw_qos_vport_create_sched_element(struct mlx5_eswitch *esw,
 	void *vport_elem;
 	int err;
 
+	if (!esw_qos_element_type_supported(dev, SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT))
+		return -EOPNOTSUPP;
+
 	parent_tsar_ix = group ? group->tsar_ix : esw->qos.root_tsar_ix;
 	MLX5_SET(scheduling_context, sched_ctx, element_type,
 		 SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT);
@@ -532,25 +554,6 @@ static int esw_qos_destroy_rate_group(struct mlx5_eswitch *esw,
 	return err;
 }
 
-static bool esw_qos_element_type_supported(struct mlx5_core_dev *dev, int type)
-{
-	switch (type) {
-	case SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR:
-		return MLX5_CAP_QOS(dev, esw_element_type) &
-		       ELEMENT_TYPE_CAP_MASK_TSAR;
-	case SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT:
-		return MLX5_CAP_QOS(dev, esw_element_type) &
-		       ELEMENT_TYPE_CAP_MASK_VPORT;
-	case SCHEDULING_CONTEXT_ELEMENT_TYPE_VPORT_TC:
-		return MLX5_CAP_QOS(dev, esw_element_type) &
-		       ELEMENT_TYPE_CAP_MASK_VPORT_TC;
-	case SCHEDULING_CONTEXT_ELEMENT_TYPE_PARA_VPORT_TC:
-		return MLX5_CAP_QOS(dev, esw_element_type) &
-		       ELEMENT_TYPE_CAP_MASK_PARA_VPORT_TC;
-	}
-	return false;
-}
-
 static int esw_qos_create(struct mlx5_eswitch *esw, struct netlink_ext_ack *extack)
 {
 	u32 tsar_ctx[MLX5_ST_SZ_DW(scheduling_context)] = {};
@@ -561,7 +564,8 @@ static int esw_qos_create(struct mlx5_eswitch *esw, struct netlink_ext_ack *exta
 	if (!MLX5_CAP_GEN(dev, qos) || !MLX5_CAP_QOS(dev, esw_scheduling))
 		return -EOPNOTSUPP;
 
-	if (!esw_qos_element_type_supported(dev, SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR))
+	if (!esw_qos_element_type_supported(dev, SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR) ||
+	    !(MLX5_CAP_QOS(dev, esw_tsar_type) & TSAR_TYPE_CAP_MASK_DWRR))
 		return -EOPNOTSUPP;
 
 	MLX5_SET(scheduling_context, tsar_ctx, element_type,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/qos.c
index 8bce730b5c5b..db2bd3ad63ba 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/qos.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/qos.c
@@ -28,6 +28,9 @@ int mlx5_qos_create_leaf_node(struct mlx5_core_dev *mdev, u32 parent_id,
 {
 	u32 sched_ctx[MLX5_ST_SZ_DW(scheduling_context)] = {0};
 
+	if (!(MLX5_CAP_QOS(mdev, nic_element_type) & ELEMENT_TYPE_CAP_MASK_QUEUE_GROUP))
+		return -EOPNOTSUPP;
+
 	MLX5_SET(scheduling_context, sched_ctx, parent_element_id, parent_id);
 	MLX5_SET(scheduling_context, sched_ctx, element_type,
 		 SCHEDULING_CONTEXT_ELEMENT_TYPE_QUEUE_GROUP);
@@ -44,6 +47,10 @@ int mlx5_qos_create_inner_node(struct mlx5_core_dev *mdev, u32 parent_id,
 	u32 sched_ctx[MLX5_ST_SZ_DW(scheduling_context)] = {0};
 	void *attr;
 
+	if (!(MLX5_CAP_QOS(mdev, nic_element_type) & ELEMENT_TYPE_CAP_MASK_TSAR) ||
+	    !(MLX5_CAP_QOS(mdev, nic_tsar_type) & TSAR_TYPE_CAP_MASK_DWRR))
+		return -EOPNOTSUPP;
+
 	MLX5_SET(scheduling_context, sched_ctx, parent_element_id, parent_id);
 	MLX5_SET(scheduling_context, sched_ctx, element_type,
 		 SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR);
-- 
2.43.0

[PATCH 6.6 67/91] net/mlx5: Fix bridge mode operations when there are no VFs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Poirier <bpoirier@nvidia.com>

[ Upstream commit b1d305abef4640af1b4f1b4774d513cd81b10cfc ]

Currently, trying to set the bridge mode attribute when numvfs=0 leads to a
crash:

bridge link set dev eth2 hwmode vepa

[  168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
[  168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core]
[...]
[  168.976037] Call Trace:
[  168.976188]  <TASK>
[  168.978620]  _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core]
[  168.979074]  mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core]
[  168.979471]  rtnl_bridge_setlink+0xe9/0x1f0
[  168.979714]  rtnetlink_rcv_msg+0x159/0x400
[  168.980451]  netlink_rcv_skb+0x54/0x100
[  168.980675]  netlink_unicast+0x241/0x360
[  168.980918]  netlink_sendmsg+0x1f6/0x430
[  168.981162]  ____sys_sendmsg+0x3bb/0x3f0
[  168.982155]  ___sys_sendmsg+0x88/0xd0
[  168.985036]  __sys_sendmsg+0x59/0xa0
[  168.985477]  do_syscall_64+0x79/0x150
[  168.987273]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  168.987773] RIP: 0033:0x7f8f7950f917

(esw->fdb_table.legacy.vepa_fdb is null)

The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.

Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output.

Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c
index 255bc8b749f9..8587cd572da5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/legacy.c
@@ -319,7 +319,7 @@ int mlx5_eswitch_set_vepa(struct mlx5_eswitch *esw, u8 setting)
 		return -EPERM;
 
 	mutex_lock(&esw->state_lock);
-	if (esw->mode != MLX5_ESWITCH_LEGACY) {
+	if (esw->mode != MLX5_ESWITCH_LEGACY || !mlx5_esw_is_fdb_created(esw)) {
 		err = -EOPNOTSUPP;
 		goto out;
 	}
@@ -339,7 +339,7 @@ int mlx5_eswitch_get_vepa(struct mlx5_eswitch *esw, u8 *setting)
 	if (!mlx5_esw_allowed(esw))
 		return -EPERM;
 
-	if (esw->mode != MLX5_ESWITCH_LEGACY)
+	if (esw->mode != MLX5_ESWITCH_LEGACY || !mlx5_esw_is_fdb_created(esw))
 		return -EOPNOTSUPP;
 
 	*setting = esw->fdb_table.legacy.vepa_uplink_rule ? 1 : 0;
-- 
2.43.0

[PATCH 6.6 68/91] fou: fix initialization of grc

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Muhammad Usama Anjum <usama.anjum@collabora.com>

[ Upstream commit 4c8002277167125078e6b9b90137bdf443ebaa08 ]

The grc must be initialize first. There can be a condition where if
fou is NULL, goto out will be executed and grc would be used
uninitialized.

Fixes: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240906102839.202798-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/fou_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/fou_core.c b/net/ipv4/fou_core.c
index e0b8d6b17a34..4e0a7d038e21 100644
--- a/net/ipv4/fou_core.c
+++ b/net/ipv4/fou_core.c
@@ -336,11 +336,11 @@ static struct sk_buff *gue_gro_receive(struct sock *sk,
 	struct gro_remcsum grc;
 	u8 proto;
 
+	skb_gro_remcsum_init(&grc);
+
 	if (!fou)
 		goto out;
 
-	skb_gro_remcsum_init(&grc);
-
 	off = skb_gro_offset(skb);
 	len = off + sizeof(*guehdr);
 
-- 
2.43.0

[PATCH 6.6 69/91] octeontx2-af: Modify SMQ flush sequence to drop packets

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen Mamindlapalli <naveenm@marvell.com>

[ Upstream commit 019aba04f08c2102b35ce7fee9d4628d349f56c0 ]

The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.

Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |  3 +-
 .../ethernet/marvell/octeontx2/af/rvu_nix.c   | 59 +++++++++++++++----
 2 files changed, 48 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 185c296eaaf0..e81cfcaf9ce4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -290,6 +290,7 @@ struct nix_mark_format {
 
 /* smq(flush) to tl1 cir/pir info */
 struct nix_smq_tree_ctx {
+	u16 schq;
 	u64 cir_off;
 	u64 cir_val;
 	u64 pir_off;
@@ -299,8 +300,6 @@ struct nix_smq_tree_ctx {
 /* smq flush context */
 struct nix_smq_flush_ctx {
 	int smq;
-	u16 tl1_schq;
-	u16 tl2_schq;
 	struct nix_smq_tree_ctx smq_tree_ctx[NIX_TXSCH_LVL_CNT];
 };
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index a07e5c8786c4..224a025283ca 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -2146,14 +2146,13 @@ static void nix_smq_flush_fill_ctx(struct rvu *rvu, int blkaddr, int smq,
 	schq = smq;
 	for (lvl = NIX_TXSCH_LVL_SMQ; lvl <= NIX_TXSCH_LVL_TL1; lvl++) {
 		smq_tree_ctx = &smq_flush_ctx->smq_tree_ctx[lvl];
+		smq_tree_ctx->schq = schq;
 		if (lvl == NIX_TXSCH_LVL_TL1) {
-			smq_flush_ctx->tl1_schq = schq;
 			smq_tree_ctx->cir_off = NIX_AF_TL1X_CIR(schq);
 			smq_tree_ctx->pir_off = 0;
 			smq_tree_ctx->pir_val = 0;
 			parent_off = 0;
 		} else if (lvl == NIX_TXSCH_LVL_TL2) {
-			smq_flush_ctx->tl2_schq = schq;
 			smq_tree_ctx->cir_off = NIX_AF_TL2X_CIR(schq);
 			smq_tree_ctx->pir_off = NIX_AF_TL2X_PIR(schq);
 			parent_off = NIX_AF_TL2X_PARENT(schq);
@@ -2188,8 +2187,8 @@ static void nix_smq_flush_enadis_xoff(struct rvu *rvu, int blkaddr,
 {
 	struct nix_txsch *txsch;
 	struct nix_hw *nix_hw;
+	int tl2, tl2_schq;
 	u64 regoff;
-	int tl2;
 
 	nix_hw = get_nix_hw(rvu->hw, blkaddr);
 	if (!nix_hw)
@@ -2197,16 +2196,17 @@ static void nix_smq_flush_enadis_xoff(struct rvu *rvu, int blkaddr,
 
 	/* loop through all TL2s with matching PF_FUNC */
 	txsch = &nix_hw->txsch[NIX_TXSCH_LVL_TL2];
+	tl2_schq = smq_flush_ctx->smq_tree_ctx[NIX_TXSCH_LVL_TL2].schq;
 	for (tl2 = 0; tl2 < txsch->schq.max; tl2++) {
 		/* skip the smq(flush) TL2 */
-		if (tl2 == smq_flush_ctx->tl2_schq)
+		if (tl2 == tl2_schq)
 			continue;
 		/* skip unused TL2s */
 		if (TXSCH_MAP_FLAGS(txsch->pfvf_map[tl2]) & NIX_TXSCHQ_FREE)
 			continue;
 		/* skip if PF_FUNC doesn't match */
 		if ((TXSCH_MAP_FUNC(txsch->pfvf_map[tl2]) & ~RVU_PFVF_FUNC_MASK) !=
-		    (TXSCH_MAP_FUNC(txsch->pfvf_map[smq_flush_ctx->tl2_schq] &
+		    (TXSCH_MAP_FUNC(txsch->pfvf_map[tl2_schq] &
 				    ~RVU_PFVF_FUNC_MASK)))
 			continue;
 		/* enable/disable XOFF */
@@ -2248,10 +2248,12 @@ static int nix_smq_flush(struct rvu *rvu, int blkaddr,
 			 int smq, u16 pcifunc, int nixlf)
 {
 	struct nix_smq_flush_ctx *smq_flush_ctx;
+	int err, restore_tx_en = 0, i;
 	int pf = rvu_get_pf(pcifunc);
 	u8 cgx_id = 0, lmac_id = 0;
-	int err, restore_tx_en = 0;
-	u64 cfg;
+	u16 tl2_tl3_link_schq;
+	u8 link, link_level;
+	u64 cfg, bmap = 0;
 
 	if (!is_rvu_otx2(rvu)) {
 		/* Skip SMQ flush if pkt count is zero */
@@ -2275,16 +2277,38 @@ static int nix_smq_flush(struct rvu *rvu, int blkaddr,
 	nix_smq_flush_enadis_xoff(rvu, blkaddr, smq_flush_ctx, true);
 	nix_smq_flush_enadis_rate(rvu, blkaddr, smq_flush_ctx, false);
 
-	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SMQX_CFG(smq));
-	/* Do SMQ flush and set enqueue xoff */
-	cfg |= BIT_ULL(50) | BIT_ULL(49);
-	rvu_write64(rvu, blkaddr, NIX_AF_SMQX_CFG(smq), cfg);
-
 	/* Disable backpressure from physical link,
 	 * otherwise SMQ flush may stall.
 	 */
 	rvu_cgx_enadis_rx_bp(rvu, pf, false);
 
+	link_level = rvu_read64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL) & 0x01 ?
+			NIX_TXSCH_LVL_TL3 : NIX_TXSCH_LVL_TL2;
+	tl2_tl3_link_schq = smq_flush_ctx->smq_tree_ctx[link_level].schq;
+	link = smq_flush_ctx->smq_tree_ctx[NIX_TXSCH_LVL_TL1].schq;
+
+	/* SMQ set enqueue xoff */
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SMQX_CFG(smq));
+	cfg |= BIT_ULL(50);
+	rvu_write64(rvu, blkaddr, NIX_AF_SMQX_CFG(smq), cfg);
+
+	/* Clear all NIX_AF_TL3_TL2_LINK_CFG[ENA] for the TL3/TL2 queue */
+	for (i = 0; i < (rvu->hw->cgx_links + rvu->hw->lbk_links); i++) {
+		cfg = rvu_read64(rvu, blkaddr,
+				 NIX_AF_TL3_TL2X_LINKX_CFG(tl2_tl3_link_schq, link));
+		if (!(cfg & BIT_ULL(12)))
+			continue;
+		bmap |= (1 << i);
+		cfg &= ~BIT_ULL(12);
+		rvu_write64(rvu, blkaddr,
+			    NIX_AF_TL3_TL2X_LINKX_CFG(tl2_tl3_link_schq, link), cfg);
+	}
+
+	/* Do SMQ flush and set enqueue xoff */
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SMQX_CFG(smq));
+	cfg |= BIT_ULL(50) | BIT_ULL(49);
+	rvu_write64(rvu, blkaddr, NIX_AF_SMQX_CFG(smq), cfg);
+
 	/* Wait for flush to complete */
 	err = rvu_poll_reg(rvu, blkaddr,
 			   NIX_AF_SMQX_CFG(smq), BIT_ULL(49), true);
@@ -2293,6 +2317,17 @@ static int nix_smq_flush(struct rvu *rvu, int blkaddr,
 			 "NIXLF%d: SMQ%d flush failed, txlink might be busy\n",
 			 nixlf, smq);
 
+	/* Set NIX_AF_TL3_TL2_LINKX_CFG[ENA] for the TL3/TL2 queue */
+	for (i = 0; i < (rvu->hw->cgx_links + rvu->hw->lbk_links); i++) {
+		if (!(bmap & (1 << i)))
+			continue;
+		cfg = rvu_read64(rvu, blkaddr,
+				 NIX_AF_TL3_TL2X_LINKX_CFG(tl2_tl3_link_schq, link));
+		cfg |= BIT_ULL(12);
+		rvu_write64(rvu, blkaddr,
+			    NIX_AF_TL3_TL2X_LINKX_CFG(tl2_tl3_link_schq, link), cfg);
+	}
+
 	/* clear XOFF on TL2s */
 	nix_smq_flush_enadis_rate(rvu, blkaddr, smq_flush_ctx, true);
 	nix_smq_flush_enadis_xoff(rvu, blkaddr, smq_flush_ctx, false);
-- 
2.43.0

[PATCH 6.6 70/91] net: ftgmac100: Enable TX interrupt to avoid TX timeout

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacky Chou <jacky_chou@aspeedtech.com>

[ Upstream commit fef2843bb49f414d1523ca007d088071dee0e055 ]

Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.

When I am verifying iperf3 over UDP, the network hangs.
Like the log below.

root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0
Connecting to host 192.168.100.100, port 5201
[  4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201
[ ID] Interval           Transfer     Bandwidth       Total Datagrams
[  4]   0.00-20.42  sec   160 KBytes  64.2 Kbits/sec  20
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
[  4]  20.42-20.42  sec  0.00 Bytes  0.00 bits/sec  0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval          Transfer    Bandwidth      Jitter   Lost/Total Datagrams
[  4]   0.00-20.42  sec  160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%)
[  4] Sent 20 datagrams
iperf3: error - the server has terminated

The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.

Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/faraday/ftgmac100.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 63b3e02fab16..4968f6f0bdbc 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -84,7 +84,7 @@
 			    FTGMAC100_INT_RPKT_BUF)
 
 /* All the interrupts we care about */
-#define FTGMAC100_INT_ALL (FTGMAC100_INT_RPKT_BUF  |  \
+#define FTGMAC100_INT_ALL (FTGMAC100_INT_RXTX  |  \
 			   FTGMAC100_INT_BAD)
 
 /*
-- 
2.43.0

[PATCH 6.6 71/91] selftests: net: csum: Fix checksums for packets with non-zero padding

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Anderson <sean.anderson@linux.dev>

[ Upstream commit e8a63d473b49011a68a748aea1c8aefa046ebacf ]

Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like

rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum

Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.

Fixes: 91a7de85600d ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/csum.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/net/csum.c b/tools/testing/selftests/net/csum.c
index 90eb06fefa59..eef72b50270c 100644
--- a/tools/testing/selftests/net/csum.c
+++ b/tools/testing/selftests/net/csum.c
@@ -654,10 +654,16 @@ static int recv_verify_packet_ipv4(void *nh, int len)
 {
 	struct iphdr *iph = nh;
 	uint16_t proto = cfg_encap ? IPPROTO_UDP : cfg_proto;
+	uint16_t ip_len;
 
 	if (len < sizeof(*iph) || iph->protocol != proto)
 		return -1;
 
+	ip_len = ntohs(iph->tot_len);
+	if (ip_len > len || ip_len < sizeof(*iph))
+		return -1;
+
+	len = ip_len;
 	iph_addr_p = &iph->saddr;
 	if (proto == IPPROTO_TCP)
 		return recv_verify_packet_tcp(iph + 1, len - sizeof(*iph));
@@ -669,16 +675,22 @@ static int recv_verify_packet_ipv6(void *nh, int len)
 {
 	struct ipv6hdr *ip6h = nh;
 	uint16_t proto = cfg_encap ? IPPROTO_UDP : cfg_proto;
+	uint16_t ip_len;
 
 	if (len < sizeof(*ip6h) || ip6h->nexthdr != proto)
 		return -1;
 
+	ip_len = ntohs(ip6h->payload_len);
+	if (ip_len > len - sizeof(*ip6h))
+		return -1;
+
+	len = ip_len;
 	iph_addr_p = &ip6h->saddr;
 
 	if (proto == IPPROTO_TCP)
-		return recv_verify_packet_tcp(ip6h + 1, len - sizeof(*ip6h));
+		return recv_verify_packet_tcp(ip6h + 1, len);
 	else
-		return recv_verify_packet_udp(ip6h + 1, len - sizeof(*ip6h));
+		return recv_verify_packet_udp(ip6h + 1, len);
 }
 
 /* return whether auxdata includes TP_STATUS_CSUM_VALID */
-- 
2.43.0

[PATCH 6.6 72/91] netfilter: nft_socket: fix sk refcount leaks

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 8b26ff7af8c32cb4148b3e147c52f9e4c695209c ]

We must put 'sk' reference before returning.

Fixes: 039b1f4f24ec ("netfilter: nft_socket: fix erroneous socket assignment")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_socket.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nft_socket.c b/net/netfilter/nft_socket.c
index f30163e2ca62..765ffd6e06bc 100644
--- a/net/netfilter/nft_socket.c
+++ b/net/netfilter/nft_socket.c
@@ -110,13 +110,13 @@ static void nft_socket_eval(const struct nft_expr *expr,
 			*dest = READ_ONCE(sk->sk_mark);
 		} else {
 			regs->verdict.code = NFT_BREAK;
-			return;
+			goto out_put_sk;
 		}
 		break;
 	case NFT_SOCKET_WILDCARD:
 		if (!sk_fullsock(sk)) {
 			regs->verdict.code = NFT_BREAK;
-			return;
+			goto out_put_sk;
 		}
 		nft_socket_wildcard(pkt, regs, sk, dest);
 		break;
@@ -124,7 +124,7 @@ static void nft_socket_eval(const struct nft_expr *expr,
 	case NFT_SOCKET_CGROUPV2:
 		if (!nft_sock_get_eval_cgroupv2(dest, sk, pkt, priv->level)) {
 			regs->verdict.code = NFT_BREAK;
-			return;
+			goto out_put_sk;
 		}
 		break;
 #endif
@@ -133,6 +133,7 @@ static void nft_socket_eval(const struct nft_expr *expr,
 		regs->verdict.code = NFT_BREAK;
 	}
 
+out_put_sk:
 	if (sk != skb->sk)
 		sock_gen_put(sk);
 }
-- 
2.43.0

[PATCH 6.6 73/91] netfilter: nft_socket: make cgroupsv2 matching work with namespaces

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 7f3287db654395f9c5ddd246325ff7889f550286 ]

When running in container environmment, /sys/fs/cgroup/ might not be
the real root node of the sk-attached cgroup.

Example:

In container:
% stat /sys//fs/cgroup/
Device: 0,21    Inode: 2214  ..
% stat /sys/fs/cgroup/foo
Device: 0,21    Inode: 2264  ..

The expectation would be for:

  nft add rule .. socket cgroupv2 level 1 "foo" counter

to match traffic from a process that got added to "foo" via
"echo $pid > /sys/fs/cgroup/foo/cgroup.procs".

However, 'level 3' is needed to make this work.

Seen from initial namespace, the complete hierarchy is:

% stat /sys/fs/cgroup/system.slice/docker-.../foo
  Device: 0,21    Inode: 2264 ..

i.e. hierarchy is
0    1               2              3
/ -> system.slice -> docker-1... -> foo

... but the container doesn't know that its "/" is the "docker-1.."
cgroup.  Current code will retrieve the 'system.slice' cgroup node
and store its kn->id in the destination register, so compare with
2264 ("foo" cgroup id) will not match.

Fetch "/" cgroup from ->init() and add its level to the level we try to
extract.  cgroup root-level is 0 for the init-namespace or the level
of the ancestor that is exposed as the cgroup root inside the container.

In the above case, cgrp->level of "/" resolved in the container is 2
(docker-1...scope/) and request for 'level 1' will get adjusted
to fetch the actual level (3).

v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it.
    (kernel test robot)

Cc: cgroups@vger.kernel.org
Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2")
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_socket.c | 41 +++++++++++++++++++++++++++++++++++---
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nft_socket.c b/net/netfilter/nft_socket.c
index 765ffd6e06bc..12cdff640492 100644
--- a/net/netfilter/nft_socket.c
+++ b/net/netfilter/nft_socket.c
@@ -9,7 +9,8 @@
 
 struct nft_socket {
 	enum nft_socket_keys		key:8;
-	u8				level;
+	u8				level;		/* cgroupv2 level to extract */
+	u8				level_user;	/* cgroupv2 level provided by userspace */
 	u8				len;
 	union {
 		u8			dreg;
@@ -53,6 +54,28 @@ nft_sock_get_eval_cgroupv2(u32 *dest, struct sock *sk, const struct nft_pktinfo
 	memcpy(dest, &cgid, sizeof(u64));
 	return true;
 }
+
+/* process context only, uses current->nsproxy. */
+static noinline int nft_socket_cgroup_subtree_level(void)
+{
+	struct cgroup *cgrp = cgroup_get_from_path("/");
+	int level;
+
+	if (!cgrp)
+		return -ENOENT;
+
+	level = cgrp->level;
+
+	cgroup_put(cgrp);
+
+	if (WARN_ON_ONCE(level > 255))
+		return -ERANGE;
+
+	if (WARN_ON_ONCE(level < 0))
+		return -EINVAL;
+
+	return level;
+}
 #endif
 
 static struct sock *nft_socket_do_lookup(const struct nft_pktinfo *pkt)
@@ -174,9 +197,10 @@ static int nft_socket_init(const struct nft_ctx *ctx,
 	case NFT_SOCKET_MARK:
 		len = sizeof(u32);
 		break;
-#ifdef CONFIG_CGROUPS
+#ifdef CONFIG_SOCK_CGROUP_DATA
 	case NFT_SOCKET_CGROUPV2: {
 		unsigned int level;
+		int err;
 
 		if (!tb[NFTA_SOCKET_LEVEL])
 			return -EINVAL;
@@ -185,6 +209,17 @@ static int nft_socket_init(const struct nft_ctx *ctx,
 		if (level > 255)
 			return -EOPNOTSUPP;
 
+		err = nft_socket_cgroup_subtree_level();
+		if (err < 0)
+			return err;
+
+		priv->level_user = level;
+
+		level += err;
+		/* Implies a giant cgroup tree */
+		if (WARN_ON_ONCE(level > 255))
+			return -EOPNOTSUPP;
+
 		priv->level = level;
 		len = sizeof(u64);
 		break;
@@ -209,7 +244,7 @@ static int nft_socket_dump(struct sk_buff *skb,
 	if (nft_dump_register(skb, NFTA_SOCKET_DREG, priv->dreg))
 		return -1;
 	if (priv->key == NFT_SOCKET_CGROUPV2 &&
-	    nla_put_be32(skb, NFTA_SOCKET_LEVEL, htonl(priv->level)))
+	    nla_put_be32(skb, NFTA_SOCKET_LEVEL, htonl(priv->level_user)))
 		return -1;
 	return 0;
 }
-- 
2.43.0

[PATCH 6.6 74/91] net: dsa: felix: ignore pending status of TAS module when its disabled

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>

[ Upstream commit 70654f4c212e83898feced125d91ebb3695950d8 ]

The TAS module could not be configured when it's running in pending
status. We need disable the module and configure it again. However, the
pending status is not cleared after the module disabled. TC taprio set
will always return busy even it's disabled.

For example, a user uses tc-taprio to configure Qbv and a future
basetime. The TAS module will run in a pending status. There is no way
to reconfigure Qbv, it always returns busy.

Actually the TAS module can be reconfigured when it's disabled. So it
doesn't need to check the pending status if the TAS module is disabled.

After the patch, user can delete the tc taprio configuration to disable
Qbv and reconfigure it again.

Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 3c5509e75a54..afb5dae4439c 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1474,10 +1474,13 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
 	/* Hardware errata -  Admin config could not be overwritten if
 	 * config is pending, need reset the TAS module
 	 */
-	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
-	if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
-		ret = -EBUSY;
-		goto err_reset_tc;
+	val = ocelot_read_rix(ocelot, QSYS_TAG_CONFIG, port);
+	if (val & QSYS_TAG_CONFIG_ENABLE) {
+		val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
+		if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
+			ret = -EBUSY;
+			goto err_reset_tc;
+		}
 	}
 
 	ocelot_rmw_rix(ocelot,
-- 
2.43.0

[PATCH 6.6 75/91] net: dpaa: Pad packets to ETH_ZLEN

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Anderson <sean.anderson@linux.dev>

[ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ]

When sending packets under 60 bytes, up to three bytes of the buffer
following the data may be leaked. Avoid this by extending all packets to
ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be
reproduced by running

	$ ping -s 11 destination

Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index c6a3eefd83bf..e7bf70ac9a4c 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2285,12 +2285,12 @@ static netdev_tx_t
 dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 {
 	const int queue_mapping = skb_get_queue_mapping(skb);
-	bool nonlinear = skb_is_nonlinear(skb);
 	struct rtnl_link_stats64 *percpu_stats;
 	struct dpaa_percpu_priv *percpu_priv;
 	struct netdev_queue *txq;
 	struct dpaa_priv *priv;
 	struct qm_fd fd;
+	bool nonlinear;
 	int offset = 0;
 	int err = 0;
 
@@ -2300,6 +2300,13 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 
 	qm_fd_clear_fd(&fd);
 
+	/* Packet data is always read as 32-bit words, so zero out any part of
+	 * the skb which might be sent if we have to pad the packet
+	 */
+	if (__skb_put_padto(skb, ETH_ZLEN, false))
+		goto enomem;
+
+	nonlinear = skb_is_nonlinear(skb);
 	if (!nonlinear) {
 		/* We're going to store the skb backpointer at the beginning
 		 * of the data buffer, so we need a privately owned skb
-- 
2.43.0

[PATCH 6.6 76/91] tracing/osnoise: Fix build when timerlat is not enabled

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <rostedt@goodmis.org>

commit af178143343028fdec9d5960a22d17f5587fd3f5 upstream.

To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Helena Anna" <helena.anna.dubel@intel.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home
Fixes: e6a53481da29 ("tracing/timerlat: Only clear timer if a kthread exists")
Reported-by: "Bityutskiy, Artem" <artem.bityutskiy@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_osnoise.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/kernel/trace/trace_osnoise.c b/kernel/trace/trace_osnoise.c
index bbe47781617e..7e75c1214b36 100644
--- a/kernel/trace/trace_osnoise.c
+++ b/kernel/trace/trace_osnoise.c
@@ -228,6 +228,11 @@ static inline struct osnoise_variables *this_cpu_osn_var(void)
 	return this_cpu_ptr(&per_cpu_osnoise_var);
 }
 
+/*
+ * Protect the interface.
+ */
+static struct mutex interface_lock;
+
 #ifdef CONFIG_TIMERLAT_TRACER
 /*
  * Runtime information for the timer mode.
@@ -252,11 +257,6 @@ static inline struct timerlat_variables *this_cpu_tmr_var(void)
 	return this_cpu_ptr(&per_cpu_timerlat_var);
 }
 
-/*
- * Protect the interface.
- */
-static struct mutex interface_lock;
-
 /*
  * tlat_var_reset - Reset the values of the given timerlat_variables
  */
-- 
2.46.0

[PATCH 6.6 77/91] spi: nxp-fspi: fix the KASAN report out-of-bounds bug

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Han Xu <han.xu@nxp.com>

commit 2a8787c1cdc7be24fdd8953ecd1a8743a1006235 upstream.

Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.

To reproduce the issue, write 3 bytes data to NOR chip.

dd if=3b of=/dev/mtd0
[   36.926103] ==================================================================
[   36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[   36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[   36.946721]
[   36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[   36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[   36.961260] Call trace:
[   36.963723]  dump_backtrace+0x90/0xe8
[   36.967414]  show_stack+0x18/0x24
[   36.970749]  dump_stack_lvl+0x78/0x90
[   36.974451]  print_report+0x114/0x5cc
[   36.978151]  kasan_report+0xa4/0xf0
[   36.981670]  __asan_report_load_n_noabort+0x1c/0x28
[   36.986587]  nxp_fspi_exec_op+0x26ec/0x2838
[   36.990800]  spi_mem_exec_op+0x8ec/0xd30
[   36.994762]  spi_mem_no_dirmap_read+0x190/0x1e0
[   36.999323]  spi_mem_dirmap_write+0x238/0x32c
[   37.003710]  spi_nor_write_data+0x220/0x374
[   37.007932]  spi_nor_write+0x110/0x2e8
[   37.011711]  mtd_write_oob_std+0x154/0x1f0
[   37.015838]  mtd_write_oob+0x104/0x1d0
[   37.019617]  mtd_write+0xb8/0x12c
[   37.022953]  mtdchar_write+0x224/0x47c
[   37.026732]  vfs_write+0x1e4/0x8c8
[   37.030163]  ksys_write+0xec/0x1d0
[   37.033586]  __arm64_sys_write+0x6c/0x9c
[   37.037539]  invoke_syscall+0x6c/0x258
[   37.041327]  el0_svc_common.constprop.0+0x160/0x22c
[   37.046244]  do_el0_svc+0x44/0x5c
[   37.049589]  el0_svc+0x38/0x78
[   37.052681]  el0t_64_sync_handler+0x13c/0x158
[   37.057077]  el0t_64_sync+0x190/0x194
[   37.060775]
[   37.062274] Allocated by task 455:
[   37.065701]  kasan_save_stack+0x2c/0x54
[   37.069570]  kasan_save_track+0x20/0x3c
[   37.073438]  kasan_save_alloc_info+0x40/0x54
[   37.077736]  __kasan_kmalloc+0xa0/0xb8
[   37.081515]  __kmalloc_noprof+0x158/0x2f8
[   37.085563]  mtd_kmalloc_up_to+0x120/0x154
[   37.089690]  mtdchar_write+0x130/0x47c
[   37.093469]  vfs_write+0x1e4/0x8c8
[   37.096901]  ksys_write+0xec/0x1d0
[   37.100332]  __arm64_sys_write+0x6c/0x9c
[   37.104287]  invoke_syscall+0x6c/0x258
[   37.108064]  el0_svc_common.constprop.0+0x160/0x22c
[   37.112972]  do_el0_svc+0x44/0x5c
[   37.116319]  el0_svc+0x38/0x78
[   37.119401]  el0t_64_sync_handler+0x13c/0x158
[   37.123788]  el0t_64_sync+0x190/0x194
[   37.127474]
[   37.128977] The buggy address belongs to the object at ffff00081037c2a0
[   37.128977]  which belongs to the cache kmalloc-8 of size 8
[   37.141177] The buggy address is located 0 bytes inside of
[   37.141177]  allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[   37.153465]
[   37.154971] The buggy address belongs to the physical page:
[   37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[   37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[   37.175149] page_type: 0xfdffffff(slab)
[   37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[   37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[   37.194553] page dumped because: kasan: bad access detected
[   37.200144]
[   37.201647] Memory state around the buggy address:
[   37.206460]  ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[   37.213701]  ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[   37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[   37.228186]                                ^
[   37.232473]  ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   37.239718]  ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   37.246962] ==================================================================
[   37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s

Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-nxp-fspi.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -805,14 +805,15 @@ static void nxp_fspi_fill_txfifo(struct
 	if (i < op->data.nbytes) {
 		u32 data = 0;
 		int j;
+		int remaining = op->data.nbytes - i;
 		/* Wait for TXFIFO empty */
 		ret = fspi_readl_poll_tout(f, f->iobase + FSPI_INTR,
 					   FSPI_INTR_IPTXWE, 0,
 					   POLL_TOUT, true);
 		WARN_ON(ret);
 
-		for (j = 0; j < ALIGN(op->data.nbytes - i, 4); j += 4) {
-			memcpy(&data, buf + i + j, 4);
+		for (j = 0; j < ALIGN(remaining, 4); j += 4) {
+			memcpy(&data, buf + i + j, min_t(int, 4, remaining - j));
 			fspi_writel(f, data, base + FSPI_TFDR + j);
 		}
 		fspi_writel(f, FSPI_INTR_IPTXWE, base + FSPI_INTR);

[PATCH 6.6 78/91] soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 233a95fd574fde1c375c486540a90304a2d2d49f upstream.

This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it
breaks codecs using non-continuous masks in source and sink ports.  The
commit missed the point that port numbers are not used as indices for
iterating over prop.sink_ports or prop.source_ports.

Soundwire core and existing codecs expect that the array passed as
prop.sink_ports and prop.source_ports is continuous.  The port mask still
might be non-continuous, but that's unrelated.

Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/
Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps")
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soundwire/stream.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1286,18 +1286,18 @@ struct sdw_dpn_prop *sdw_get_slave_dpn_p
 					    unsigned int port_num)
 {
 	struct sdw_dpn_prop *dpn_prop;
-	unsigned long mask;
+	u8 num_ports;
 	int i;
 
 	if (direction == SDW_DATA_DIR_TX) {
-		mask = slave->prop.source_ports;
+		num_ports = hweight32(slave->prop.source_ports);
 		dpn_prop = slave->prop.src_dpn_prop;
 	} else {
-		mask = slave->prop.sink_ports;
+		num_ports = hweight32(slave->prop.sink_ports);
 		dpn_prop = slave->prop.sink_dpn_prop;
 	}
 
-	for_each_set_bit(i, &mask, 32) {
+	for (i = 0; i < num_ports; i++) {
 		if (dpn_prop[i].num == port_num)
 			return &dpn_prop[i];
 	}

[PATCH 6.6 79/91] drm/syncobj: Fix syncobj leak in drm_syncobj_eventfd_ioctl

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: T.J. Mercier <tjmercier@google.com>

commit 8c7c44be57672e1474bf15a451011c291e85fda4 upstream.

A syncobj reference is taken in drm_syncobj_find, but not released if
eventfd_ctx_fdget or kzalloc fails. Put the reference in these error
paths.

Reported-by: Xingyu Jin <xingyuj@google.com>
Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by. Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org # 6.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20240909205400.3498337-1-tjmercier@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_syncobj.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/drm_syncobj.c
+++ b/drivers/gpu/drm/drm_syncobj.c
@@ -1421,6 +1421,7 @@ drm_syncobj_eventfd_ioctl(struct drm_dev
 	struct drm_syncobj *syncobj;
 	struct eventfd_ctx *ev_fd_ctx;
 	struct syncobj_eventfd_entry *entry;
+	int ret;
 
 	if (!drm_core_check_feature(dev, DRIVER_SYNCOBJ_TIMELINE))
 		return -EOPNOTSUPP;
@@ -1436,13 +1437,15 @@ drm_syncobj_eventfd_ioctl(struct drm_dev
 		return -ENOENT;
 
 	ev_fd_ctx = eventfd_ctx_fdget(args->fd);
-	if (IS_ERR(ev_fd_ctx))
-		return PTR_ERR(ev_fd_ctx);
+	if (IS_ERR(ev_fd_ctx)) {
+		ret = PTR_ERR(ev_fd_ctx);
+		goto err_fdget;
+	}
 
 	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry) {
-		eventfd_ctx_put(ev_fd_ctx);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_kzalloc;
 	}
 	entry->syncobj = syncobj;
 	entry->ev_fd_ctx = ev_fd_ctx;
@@ -1453,6 +1456,12 @@ drm_syncobj_eventfd_ioctl(struct drm_dev
 	drm_syncobj_put(syncobj);
 
 	return 0;
+
+err_kzalloc:
+	eventfd_ctx_put(ev_fd_ctx);
+err_fdget:
+	drm_syncobj_put(syncobj);
+	return ret;
 }
 
 int

[PATCH 6.6 80/91] dma-buf: heaps: Fix off-by-one in CMA heap fault handler

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: T.J. Mercier <tjmercier@google.com>

commit ea5ff5d351b520524019f7ff7f9ce418de2dad87 upstream.

Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping.

Reported-by: Xingyu Jin <xingyuj@google.com>
Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation")
Cc: stable@vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjmercier@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma-buf/heaps/cma_heap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/dma-buf/heaps/cma_heap.c
+++ b/drivers/dma-buf/heaps/cma_heap.c
@@ -165,7 +165,7 @@ static vm_fault_t cma_heap_vm_fault(stru
 	struct vm_area_struct *vma = vmf->vma;
 	struct cma_heap_buffer *buffer = vma->vm_private_data;
 
-	if (vmf->pgoff > buffer->pagecount)
+	if (vmf->pgoff >= buffer->pagecount)
 		return VM_FAULT_SIGBUS;
 
 	vmf->page = buffer->pages[vmf->pgoff];

[PATCH 6.6 81/91] drm/nouveau/fb: restore init() for ramgp102

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Skeggs <bskeggs@nvidia.com>

commit 6db9df4f7055eb4ea339e7b83ca676edd9ec1277 upstream.

init() was removed from ramgp102 when reworking the memory detection, as
it was thought that the code was only necessary when the driver performs
mclk changes, which nouveau doesn't support on pascal.

However, it turns out that we still need to execute this on some GPUs to
restore settings after DEVINIT, so revert to the original behaviour.

v2: fix tags in commit message, cc stable

Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/319
Fixes: 2c0c15a22fa0 ("drm/nouveau/fb/gp102-ga100: switch to simpler vram size detection method")
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904232418.8590-1-bskeggs@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/ram.h      |    2 ++
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp100.c |    2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp102.c |    1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ram.h
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ram.h
@@ -46,6 +46,8 @@ u32 gm107_ram_probe_fbp(const struct nvk
 u32 gm200_ram_probe_fbp_amount(const struct nvkm_ram_func *, u32,
 			       struct nvkm_device *, int, int *);
 
+int gp100_ram_init(struct nvkm_ram *);
+
 /* RAM type-specific MR calculation routines */
 int nvkm_sddr2_calc(struct nvkm_ram *);
 int nvkm_sddr3_calc(struct nvkm_ram *);
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp100.c
@@ -27,7 +27,7 @@
 #include <subdev/bios/init.h>
 #include <subdev/bios/rammap.h>
 
-static int
+int
 gp100_ram_init(struct nvkm_ram *ram)
 {
 	struct nvkm_subdev *subdev = &ram->fb->subdev;
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp102.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgp102.c
@@ -5,6 +5,7 @@
 
 static const struct nvkm_ram_func
 gp102_ram = {
+	.init = gp100_ram_init,
 };
 
 int

[PATCH 6.6 82/91] drm/amdgpu/atomfirmware: Silence UBSAN warning

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 17ea4383649fdeaff3181ddcf1ff03350d42e591 upstream.

Per the comments, these are variable sized arrays.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81f7804ba84ee617ed594de934ed87bcc4f83531)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/include/atomfirmware.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -1006,7 +1006,7 @@ struct display_object_info_table_v1_4
   uint16_t  supporteddevices;
   uint8_t   number_of_path;
   uint8_t   reserved;
-  struct    atom_display_object_path_v2 display_path[8];   //the real number of this included in the structure is calculated by using the (whole structure size - the header size- number_of_path)/size of atom_display_object_path
+  struct    atom_display_object_path_v2 display_path[];   //the real number of this included in the structure is calculated by using the (whole structure size - the header size- number_of_path)/size of atom_display_object_path
 };
 
 struct display_object_info_table_v1_5 {
@@ -1016,7 +1016,7 @@ struct display_object_info_table_v1_5 {
 	uint8_t reserved;
 	// the real number of this included in the structure is calculated by using the
 	// (whole structure size - the header size- number_of_path)/size of atom_display_object_path
-	struct atom_display_object_path_v3 display_path[8];
+	struct atom_display_object_path_v3 display_path[];
 };
 
 /* 

[PATCH 6.6 83/91] drm/amd/amdgpu: apply command submission parser for JPEG v1

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David (Ming Qiang) Wu <David.Wu3@amd.com>

commit 8409fb50ce48d66cf9dc5391f03f05c56c430605 upstream.

Similar to jpeg_v2_dec_ring_parse_cs() but it has different
register ranges and a few other registers access.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3d5adbdf1d01708777f2eda375227cbf7a98b9fe)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c |   76 ++++++++++++++++++++++++++++++++-
 drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.h |   11 ++++
 2 files changed, 86 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.c
@@ -23,6 +23,7 @@
 
 #include "amdgpu.h"
 #include "amdgpu_jpeg.h"
+#include "amdgpu_cs.h"
 #include "soc15.h"
 #include "soc15d.h"
 #include "vcn_v1_0.h"
@@ -34,6 +35,9 @@
 static void jpeg_v1_0_set_dec_ring_funcs(struct amdgpu_device *adev);
 static void jpeg_v1_0_set_irq_funcs(struct amdgpu_device *adev);
 static void jpeg_v1_0_ring_begin_use(struct amdgpu_ring *ring);
+static int jpeg_v1_dec_ring_parse_cs(struct amdgpu_cs_parser *parser,
+				     struct amdgpu_job *job,
+				     struct amdgpu_ib *ib);
 
 static void jpeg_v1_0_decode_ring_patch_wreg(struct amdgpu_ring *ring, uint32_t *ptr, uint32_t reg_offset, uint32_t val)
 {
@@ -300,7 +304,10 @@ static void jpeg_v1_0_decode_ring_emit_i
 
 	amdgpu_ring_write(ring,
 		PACKETJ(SOC15_REG_OFFSET(JPEG, 0, mmUVD_LMI_JRBC_IB_VMID), 0, 0, PACKETJ_TYPE0));
-	amdgpu_ring_write(ring, (vmid | (vmid << 4)));
+	if (ring->funcs->parse_cs)
+		amdgpu_ring_write(ring, 0);
+	else
+		amdgpu_ring_write(ring, (vmid | (vmid << 4)));
 
 	amdgpu_ring_write(ring,
 		PACKETJ(SOC15_REG_OFFSET(JPEG, 0, mmUVD_LMI_JPEG_VMID), 0, 0, PACKETJ_TYPE0));
@@ -554,6 +561,7 @@ static const struct amdgpu_ring_funcs jp
 	.get_rptr = jpeg_v1_0_decode_ring_get_rptr,
 	.get_wptr = jpeg_v1_0_decode_ring_get_wptr,
 	.set_wptr = jpeg_v1_0_decode_ring_set_wptr,
+	.parse_cs = jpeg_v1_dec_ring_parse_cs,
 	.emit_frame_size =
 		6 + 6 + /* hdp invalidate / flush */
 		SOC15_FLUSH_GPU_TLB_NUM_WREG * 6 +
@@ -612,3 +620,69 @@ static void jpeg_v1_0_ring_begin_use(str
 
 	vcn_v1_0_set_pg_for_begin_use(ring, set_clocks);
 }
+
+/**
+ * jpeg_v1_dec_ring_parse_cs - command submission parser
+ *
+ * @parser: Command submission parser context
+ * @job: the job to parse
+ * @ib: the IB to parse
+ *
+ * Parse the command stream, return -EINVAL for invalid packet,
+ * 0 otherwise
+ */
+static int jpeg_v1_dec_ring_parse_cs(struct amdgpu_cs_parser *parser,
+				     struct amdgpu_job *job,
+				     struct amdgpu_ib *ib)
+{
+	u32 i, reg, res, cond, type;
+	int ret = 0;
+	struct amdgpu_device *adev = parser->adev;
+
+	for (i = 0; i < ib->length_dw ; i += 2) {
+		reg  = CP_PACKETJ_GET_REG(ib->ptr[i]);
+		res  = CP_PACKETJ_GET_RES(ib->ptr[i]);
+		cond = CP_PACKETJ_GET_COND(ib->ptr[i]);
+		type = CP_PACKETJ_GET_TYPE(ib->ptr[i]);
+
+		if (res || cond != PACKETJ_CONDITION_CHECK0) /* only allow 0 for now */
+			return -EINVAL;
+
+		if (reg >= JPEG_V1_REG_RANGE_START && reg <= JPEG_V1_REG_RANGE_END)
+			continue;
+
+		switch (type) {
+		case PACKETJ_TYPE0:
+			if (reg != JPEG_V1_LMI_JPEG_WRITE_64BIT_BAR_HIGH &&
+			    reg != JPEG_V1_LMI_JPEG_WRITE_64BIT_BAR_LOW &&
+			    reg != JPEG_V1_LMI_JPEG_READ_64BIT_BAR_HIGH &&
+			    reg != JPEG_V1_LMI_JPEG_READ_64BIT_BAR_LOW &&
+			    reg != JPEG_V1_REG_CTX_INDEX &&
+			    reg != JPEG_V1_REG_CTX_DATA) {
+				ret = -EINVAL;
+			}
+			break;
+		case PACKETJ_TYPE1:
+			if (reg != JPEG_V1_REG_CTX_DATA)
+				ret = -EINVAL;
+			break;
+		case PACKETJ_TYPE3:
+			if (reg != JPEG_V1_REG_SOFT_RESET)
+				ret = -EINVAL;
+			break;
+		case PACKETJ_TYPE6:
+			if (ib->ptr[i] != CP_PACKETJ_NOP)
+				ret = -EINVAL;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+
+		if (ret) {
+			dev_err(adev->dev, "Invalid packet [0x%08x]!\n", ib->ptr[i]);
+			break;
+		}
+	}
+
+	return ret;
+}
--- a/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.h
+++ b/drivers/gpu/drm/amd/amdgpu/jpeg_v1_0.h
@@ -29,4 +29,15 @@ int jpeg_v1_0_sw_init(void *handle);
 void jpeg_v1_0_sw_fini(void *handle);
 void jpeg_v1_0_start(struct amdgpu_device *adev, int mode);
 
+#define JPEG_V1_REG_RANGE_START	0x8000
+#define JPEG_V1_REG_RANGE_END	0x803f
+
+#define JPEG_V1_LMI_JPEG_WRITE_64BIT_BAR_HIGH	0x8238
+#define JPEG_V1_LMI_JPEG_WRITE_64BIT_BAR_LOW	0x8239
+#define JPEG_V1_LMI_JPEG_READ_64BIT_BAR_HIGH	0x825a
+#define JPEG_V1_LMI_JPEG_READ_64BIT_BAR_LOW	0x825b
+#define JPEG_V1_REG_CTX_INDEX			0x8328
+#define JPEG_V1_REG_CTX_DATA			0x8329
+#define JPEG_V1_REG_SOFT_RESET			0x83a0
+
 #endif /*__JPEG_V1_0_H__*/

[PATCH 6.6 84/91] spi: geni-qcom: Undo runtime PM changes at driver exit time

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit 89e362c883c65ff94b76b9862285f63545fb5274 ]

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.

Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-geni-qcom.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index f4f376a8351b..983c4896c8cf 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -1110,25 +1110,27 @@ static int spi_geni_probe(struct platform_device *pdev)
 	spin_lock_init(&mas->lock);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
-	pm_runtime_enable(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
 
 	if (device_property_read_bool(&pdev->dev, "spi-slave"))
 		spi->slave = true;
 
 	ret = geni_icc_get(&mas->se, NULL);
 	if (ret)
-		goto spi_geni_probe_runtime_disable;
+		return ret;
 	/* Set the bus quota to a reasonable value for register access */
 	mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
 	mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
 
 	ret = geni_icc_set_bw(&mas->se);
 	if (ret)
-		goto spi_geni_probe_runtime_disable;
+		return ret;
 
 	ret = spi_geni_init(mas);
 	if (ret)
-		goto spi_geni_probe_runtime_disable;
+		return ret;
 
 	/*
 	 * check the mode supported and set_cs for fifo mode only
@@ -1157,8 +1159,6 @@ static int spi_geni_probe(struct platform_device *pdev)
 	free_irq(mas->irq, spi);
 spi_geni_release_dma:
 	spi_geni_release_dma_chan(mas);
-spi_geni_probe_runtime_disable:
-	pm_runtime_disable(dev);
 	return ret;
 }
 
@@ -1173,7 +1173,6 @@ static void spi_geni_remove(struct platform_device *pdev)
 	spi_geni_release_dma_chan(mas);
 
 	free_irq(mas->irq, spi);
-	pm_runtime_disable(&pdev->dev);
 }
 
 static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
-- 
2.43.0

[PATCH 6.6 85/91] spi: geni-qcom: Fix incorrect free_irq() sequence

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit b787a33864121a565aeb0e88561bf6062a19f99c ]

In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.

Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-geni-qcom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index 983c4896c8cf..7401ed3b9acd 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -1170,9 +1170,9 @@ static void spi_geni_remove(struct platform_device *pdev)
 	/* Unregister _before_ disabling pm_runtime() so we stop transfers */
 	spi_unregister_master(spi);
 
-	spi_geni_release_dma_chan(mas);
-
 	free_irq(mas->irq, spi);
+
+	spi_geni_release_dma_chan(mas);
 }
 
 static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
-- 
2.43.0

[PATCH 6.6 86/91] drm/i915/guc: prevent a possible int overflow in wq offsets

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikita Zhandarovich <n.zhandarovich@fintech.ru>

[ Upstream commit d3d37f74683e2f16f2635ee265884f7ca69350ae ]

It may be possible for the sum of the values derived from
i915_ggtt_offset() and __get_parent_scratch_offset()/
i915_ggtt_offset() to go over the u32 limit before being assigned
to wq offsets of u64 type.

Mitigate these issues by expanding one of the right operands
to u64 to avoid any overflow issues just in case.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: c2aa552ff09d ("drm/i915/guc: Add multi-lrc context registration")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patchwork.freedesktop.org/patch/msgid/20240725155925.14707-1-n.zhandarovich@fintech.ru
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1f1c1bd56620b80ae407c5790743e17caad69cec)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
index b5de5a9f5967..236dfff81fea 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -2695,9 +2695,9 @@ static void prepare_context_registration_info_v70(struct intel_context *ce,
 		ce->parallel.guc.wqi_tail = 0;
 		ce->parallel.guc.wqi_head = 0;
 
-		wq_desc_offset = i915_ggtt_offset(ce->state) +
+		wq_desc_offset = (u64)i915_ggtt_offset(ce->state) +
 				 __get_parent_scratch_offset(ce);
-		wq_base_offset = i915_ggtt_offset(ce->state) +
+		wq_base_offset = (u64)i915_ggtt_offset(ce->state) +
 				 __get_wq_offset(ce);
 		info->wq_desc_lo = lower_32_bits(wq_desc_offset);
 		info->wq_desc_hi = upper_32_bits(wq_desc_offset);
-- 
2.43.0

[PATCH 6.6 87/91] ASoC: codecs: avoid possible garbage value in peb2466_reg_read()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Su Hui <suhui@nfschina.com>

[ Upstream commit 38cc0334baabc5baf08a1db753de521e016c0432 ]

Clang static checker (scan-build) warning:
sound/soc/codecs/peb2466.c:232:8:
Assigned value is garbage or undefined [core.uninitialized.Assign]
  232 |                 *val = tmp;
      |                      ^ ~~~

When peb2466_read_byte() fails, 'tmp' will have a garbage value.
Add a judgemnet to avoid this problem.

Fixes: 227f609c7c0e ("ASoC: codecs: Add support for the Infineon PEB2466 codec")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/peb2466.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/peb2466.c b/sound/soc/codecs/peb2466.c
index 5dec69be0acb..06c83d2042f3 100644
--- a/sound/soc/codecs/peb2466.c
+++ b/sound/soc/codecs/peb2466.c
@@ -229,7 +229,8 @@ static int peb2466_reg_read(void *context, unsigned int reg, unsigned int *val)
 	case PEB2466_CMD_XOP:
 	case PEB2466_CMD_SOP:
 		ret = peb2466_read_byte(peb2466, reg, &tmp);
-		*val = tmp;
+		if (!ret)
+			*val = tmp;
 		break;
 	default:
 		dev_err(&peb2466->spi->dev, "Not a XOP or SOP command\n");
-- 
2.43.0

[PATCH 6.6 88/91] cifs: Fix signature miscalculation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

[ Upstream commit 5a20b7cb0d8d3ee490a8e088dc2584aa782e3355 ]

Fix the calculation of packet signatures by adding the offset into a page
in the read or write data payload when hashing the pages from it.

Fixes: 39bc58203f04 ("cifs: Add a function to Hash the contents of an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/cifsencrypt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/cifsencrypt.c b/fs/smb/client/cifsencrypt.c
index 6322f0f68a17..b0473c2567fe 100644
--- a/fs/smb/client/cifsencrypt.c
+++ b/fs/smb/client/cifsencrypt.c
@@ -129,7 +129,7 @@ static ssize_t cifs_shash_xarray(const struct iov_iter *iter, ssize_t maxsize,
 			for (j = foffset / PAGE_SIZE; j < npages; j++) {
 				len = min_t(size_t, maxsize, PAGE_SIZE - offset);
 				p = kmap_local_page(folio_page(folio, j));
-				ret = crypto_shash_update(shash, p, len);
+				ret = crypto_shash_update(shash, p + offset, len);
 				kunmap_local(p);
 				if (ret < 0)
 					return ret;
-- 
2.43.0

[PATCH 6.6 89/91] pinctrl: meteorlake: Add Arrow Lake-H/U ACPI ID

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit a366e46da10d7bfa1a52c3bd31f342a3d0e8e7fe upstream.

Intel Arrow Lake-H/U has the same GPIO hardware than Meteor Lake-P but
the ACPI ID is different. Add this new ACPI ID to the list of supported
devices.

Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/intel/pinctrl-meteorlake.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/pinctrl/intel/pinctrl-meteorlake.c
+++ b/drivers/pinctrl/intel/pinctrl-meteorlake.c
@@ -583,6 +583,7 @@ static const struct intel_pinctrl_soc_da
 };
 
 static const struct acpi_device_id mtl_pinctrl_acpi_match[] = {
+	{ "INTC105E", (kernel_ulong_t)&mtlp_soc_data },
 	{ "INTC1083", (kernel_ulong_t)&mtlp_soc_data },
 	{ "INTC1082", (kernel_ulong_t)&mtls_soc_data },
 	{ }

[PATCH 6.6 90/91] ASoC: meson: axg-card: fix use-after-free

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arseniy Krasnov <avkrasnov@salutedevices.com>

commit 4f9a71435953f941969a4f017e2357db62d85a86 upstream.

Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.

Kasan bug report:

==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356

CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
 dump_backtrace+0x94/0xec
 show_stack+0x18/0x24
 dump_stack_lvl+0x78/0x90
 print_report+0xfc/0x5c0
 kasan_report+0xb8/0xfc
 __asan_load8+0x9c/0xb8
 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
 meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
 platform_probe+0x8c/0xf4
 really_probe+0x110/0x39c
 __driver_probe_device+0xb8/0x18c
 driver_probe_device+0x108/0x1d8
 __driver_attach+0xd0/0x25c
 bus_for_each_dev+0xe0/0x154
 driver_attach+0x34/0x44
 bus_add_driver+0x134/0x294
 driver_register+0xa8/0x1e8
 __platform_driver_register+0x44/0x54
 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
 do_one_initcall+0xdc/0x25c
 do_init_module+0x10c/0x334
 load_module+0x24c4/0x26cc
 init_module_from_file+0xd4/0x128
 __arm64_sys_finit_module+0x1f4/0x41c
 invoke_syscall+0x60/0x188
 el0_svc_common.constprop.0+0x78/0x13c
 do_el0_svc+0x30/0x40
 el0_svc+0x38/0x78
 el0t_64_sync_handler+0x100/0x12c
 el0t_64_sync+0x190/0x194

Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support")
Cc: Stable@vger.kernel.org
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/meson/axg-card.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -104,7 +104,7 @@ static int axg_card_add_tdm_loopback(str
 				     int *index)
 {
 	struct meson_card *priv = snd_soc_card_get_drvdata(card);
-	struct snd_soc_dai_link *pad = &card->dai_link[*index];
+	struct snd_soc_dai_link *pad;
 	struct snd_soc_dai_link *lb;
 	struct snd_soc_dai_link_component *dlc;
 	int ret;
@@ -114,6 +114,7 @@ static int axg_card_add_tdm_loopback(str
 	if (ret)
 		return ret;
 
+	pad = &card->dai_link[*index];
 	lb = &card->dai_link[*index + 1];
 
 	lb->name = devm_kasprintf(card->dev, GFP_KERNEL, "%s-lb", pad->name);

[PATCH 6.6 91/91] riscv: dts: starfive: add assigned-clock* to limit frquency

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: William Qiu <william.qiu@starfivetech.com>

commit af571133f7ae028ec9b5fdab78f483af13bf28d3 upstream.

In JH7110 SoC, we need to go by-pass mode, so we need add the
assigned-clock* properties to limit clock frquency.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -204,6 +204,8 @@
 
 &mmc0 {
 	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+	assigned-clock-rates = <50000000>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
@@ -220,6 +222,8 @@
 
 &mmc1 {
 	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+	assigned-clock-rates = <50000000>;
 	bus-width = <4>;
 	no-sdio;
 	no-mmc;

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Takeshi Ogasawara]

Hi Greg

On Mon, Sep 16, 2024 at 9:09 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

6.6.52-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

[    0.000000] Linux version 6.6.52-rc1rv
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 14.2.1 20240910, GNU ld (GNU
Binutils) 2.43.0) #1 SMP PREEMPT_DYNAMIC Mon Sep 16 22:24:01 JST 2024

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Harshit Mogalapalli]

On 16/09/24 17:13, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too l

Hi Greg,

No problems seen on x86_64 and aarch64 with our testing.

Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>

Thanks,
Harshit

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Peter Schneider]

Am 16.09.2024 um 13:43 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg 
oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 344 bytes --]

On Mon, Sep 16, 2024 at 01:43:36PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Naresh Kamboju]

On Mon, 16 Sept 2024 at 17:38, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


The s390 builds failed on the Linux stable-rc linux-6.6.y and linux-6.10.y due
to following build warnings / errors with gcc-13 and clang-19 with defconfig.

* s390, build
  - clang-19-allnoconfig
  - clang-19-defconfig
  - clang-19-tinyconfig
  - clang-nightly-allnoconfig
  - clang-nightly-defconfig
  - clang-nightly-tinyconfig
  - gcc-13-allmodconfig
  - gcc-13-allnoconfig
  - gcc-13-defconfig
  - gcc-13-tinyconfig
  - gcc-8-allnoconfig
  - gcc-8-defconfig-fe40093d
  - gcc-8-tinyconfig


First seen on v6.6.51-92-gfd49ddc1e5f8
  Good: v6.6.51
  BAD:  v6.6.51-92-gfd49ddc1e5f8

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

build log:
--------
arch/s390/kernel/setup.c: In function 'reserve_lowcore':
arch/s390/kernel/setup.c:748:31: error: implicit declaration of
function 'get_lowcore'; did you mean 'setup_lowcore'?
[-Werror=implicit-function-declaration]
  748 |         void *lowcore_start = get_lowcore();
      |                               ^~~~~~~~~~~
      |                               setup_lowcore
arch/s390/kernel/setup.c:748:31: warning: initialization of 'void *'
from 'int' makes pointer from integer without a cast
[-Wint-conversion]
arch/s390/kernel/setup.c:752:21: error: '__identity_base' undeclared
(first use in this function)
  752 |         if ((void *)__identity_base < lowcore_end) {
      |                     ^~~~~~~~~~~~~~~
arch/s390/kernel/setup.c:752:21: note: each undeclared identifier is
reported only once for each function it appears in
In file included from include/linux/bits.h:21,
                 from arch/s390/include/asm/ptrace.h:10,
                 from arch/s390/include/asm/lowcore.h:13,
                 from arch/s390/include/asm/current.h:13,
                 from include/linux/sched.h:12,
                 from arch/s390/kernel/setup.c:21:
include/linux/minmax.h:31:9: error: first argument to
'__builtin_choose_expr' not a constant
   31 |
__builtin_choose_expr(__is_constexpr(is_signed_type(typeof(x))),
 \
      |         ^~~~~~~~~~~~~~~~~~~~~

Build Log links,
--------
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.51-92-gfd49ddc1e5f8/testrun/25153617/suite/build/test/gcc-13-defconfig/log
 - https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9YUHx7PsQwr4lBdvjITAfP9Pp/

Build failed comparison:
 - https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.51-92-gfd49ddc1e5f8/testrun/25153617/suite/build/test/gcc-13-defconfig/history/

metadata:
----
  git describe: v6.6.51-92-gfd49ddc1e5f8
  git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
  git sha: fd49ddc1e5f8121355db23e04b94f6df460a5051
  kernel config:
https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9YUHx7PsQwr4lBdvjITAfP9Pp/config
  build url: https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9YUHx7PsQwr4lBdvjITAfP9Pp/
  toolchain: gcc-13, gcc-8 and clang-19
  config: defconfig
  arch: s390

Steps to reproduce:
---------
 - # tuxmake --runtime podman --target-arch s390 --toolchain gcc-13
--kconfig defconfig

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.6 32/91] s390/mm: Prevent lowcore vs identity mapping overlap

[Alexander Gordeev]

On Mon, Sep 16, 2024 at 01:44:08PM +0200, Greg Kroah-Hartman wrote:
> 6.6-stable review patch.  If anyone has any objections, please let me know.

Hi Greg,

Could you please drop this commit from 6.6-stable?

Thanks!

> ------------------
> 
> From: Alexander Gordeev <agordeev@linux.ibm.com>
> 
> [ Upstream commit a3ca27c405faad584af6e8e38cdafe5be73230a1 ]
> 
> The identity mapping position in virtual memory is randomized
> together with the kernel mapping. That position can never
> overlap with the lowcore even when the lowcore is relocated.
> 
> Prevent overlapping with the lowcore to allow independent
> positioning of the identity mapping. With the current value
> of the alternative lowcore address of 0x70000 the overlap
> could happen in case the identity mapping is placed at zero.
> 
> This is a prerequisite for uncoupling of randomization base
> of kernel image and identity mapping in virtual memory.
> 
> Acked-by: Vasily Gorbik <gor@linux.ibm.com>
> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/s390/kernel/setup.c | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
> index d48c7afe97e6..89fe0764af84 100644
> --- a/arch/s390/kernel/setup.c
> +++ b/arch/s390/kernel/setup.c
> @@ -741,7 +741,23 @@ static void __init memblock_add_physmem_info(void)
>  }
>  
>  /*
> - * Reserve memory used for lowcore/command line/kernel image.
> + * Reserve memory used for lowcore.
> + */
> +static void __init reserve_lowcore(void)
> +{
> +	void *lowcore_start = get_lowcore();
> +	void *lowcore_end = lowcore_start + sizeof(struct lowcore);
> +	void *start, *end;
> +
> +	if ((void *)__identity_base < lowcore_end) {
> +		start = max(lowcore_start, (void *)__identity_base);
> +		end = min(lowcore_end, (void *)(__identity_base + ident_map_size));
> +		memblock_reserve(__pa(start), __pa(end));
> +	}
> +}
> +
> +/*
> + * Reserve memory used for absolute lowcore/command line/kernel image.
>   */
>  static void __init reserve_kernel(void)
>  {
> @@ -939,6 +955,7 @@ void __init setup_arch(char **cmdline_p)
>  
>  	/* Do some memory reservations *before* memory is added to memblock */
>  	reserve_pgtables();
> +	reserve_lowcore();
>  	reserve_kernel();
>  	reserve_initrd();
>  	reserve_certificate_list();
> -- 
> 2.43.0

Re: [PATCH 6.6 32/91] s390/mm: Prevent lowcore vs identity mapping overlap

[Greg Kroah-Hartman]

On Tue, Sep 17, 2024 at 01:06:51PM +0200, Alexander Gordeev wrote:
> On Mon, Sep 16, 2024 at 01:44:08PM +0200, Greg Kroah-Hartman wrote:
> > 6.6-stable review patch.  If anyone has any objections, please let me know.
> 
> Hi Greg,
> 
> Could you please drop this commit from 6.6-stable?

Why just this one?  What about 6.10.y?  6.11?

thanks,

greg k-h

Re: [PATCH 6.6 32/91] s390/mm: Prevent lowcore vs identity mapping overlap

[Alexander Gordeev]

On Tue, Sep 17, 2024 at 01:15:10PM +0200, Greg Kroah-Hartman wrote:
> > Could you please drop this commit from 6.6-stable?
> Why just this one?  What about 6.10.y?  6.11?

Thanks for pointing out!

Yes, please drop it from 6.10 as well. There is no relocatable lowcore
support in 6.10, which this patch fixes up. And it is already included
in 6.11, starting from v6.11-rc5.

> thanks,

Thank you!

> greg k-h

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Jon Hunter]

On Mon, 16 Sep 2024 13:43:36 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.6:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version:	6.6.52-rc1-gfd49ddc1e5f8
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Florian Fainelli]

On 9/16/24 04:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Ron Economos]

On 9/16/24 4:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Greg Kroah-Hartman]

On Tue, Sep 17, 2024 at 04:00:10PM +0530, Naresh Kamboju wrote:
> On Mon, 16 Sept 2024 at 17:38, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 6.6.52 release.
> > There are 91 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> 
> The s390 builds failed on the Linux stable-rc linux-6.6.y and linux-6.10.y due
> to following build warnings / errors with gcc-13 and clang-19 with defconfig.
> 
> * s390, build
>   - clang-19-allnoconfig
>   - clang-19-defconfig
>   - clang-19-tinyconfig
>   - clang-nightly-allnoconfig
>   - clang-nightly-defconfig
>   - clang-nightly-tinyconfig
>   - gcc-13-allmodconfig
>   - gcc-13-allnoconfig
>   - gcc-13-defconfig
>   - gcc-13-tinyconfig
>   - gcc-8-allnoconfig
>   - gcc-8-defconfig-fe40093d
>   - gcc-8-tinyconfig
> 
> 
> First seen on v6.6.51-92-gfd49ddc1e5f8
>   Good: v6.6.51
>   BAD:  v6.6.51-92-gfd49ddc1e5f8
> 
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> 
> build log:
> --------
> arch/s390/kernel/setup.c: In function 'reserve_lowcore':
> arch/s390/kernel/setup.c:748:31: error: implicit declaration of
> function 'get_lowcore'; did you mean 'setup_lowcore'?
> [-Werror=implicit-function-declaration]
>   748 |         void *lowcore_start = get_lowcore();
>       |                               ^~~~~~~~~~~
>       |                               setup_lowcore
> arch/s390/kernel/setup.c:748:31: warning: initialization of 'void *'
> from 'int' makes pointer from integer without a cast
> [-Wint-conversion]
> arch/s390/kernel/setup.c:752:21: error: '__identity_base' undeclared
> (first use in this function)
>   752 |         if ((void *)__identity_base < lowcore_end) {
>       |                     ^~~~~~~~~~~~~~~
> arch/s390/kernel/setup.c:752:21: note: each undeclared identifier is
> reported only once for each function it appears in
> In file included from include/linux/bits.h:21,
>                  from arch/s390/include/asm/ptrace.h:10,
>                  from arch/s390/include/asm/lowcore.h:13,
>                  from arch/s390/include/asm/current.h:13,
>                  from include/linux/sched.h:12,
>                  from arch/s390/kernel/setup.c:21:
> include/linux/minmax.h:31:9: error: first argument to
> '__builtin_choose_expr' not a constant
>    31 |
> __builtin_choose_expr(__is_constexpr(is_signed_type(typeof(x))),
>  \
>       |         ^~~~~~~~~~~~~~~~~~~~~

Offending commit now removed from 6.6.y and 6.10.y, thanks!

greg k-h

Re: [PATCH 6.6 32/91] s390/mm: Prevent lowcore vs identity mapping overlap

[Greg Kroah-Hartman]

On Tue, Sep 17, 2024 at 05:17:32PM +0200, Alexander Gordeev wrote:
> On Tue, Sep 17, 2024 at 01:15:10PM +0200, Greg Kroah-Hartman wrote:
> > > Could you please drop this commit from 6.6-stable?
> > Why just this one?  What about 6.10.y?  6.11?
> 
> Thanks for pointing out!
> 
> Yes, please drop it from 6.10 as well. There is no relocatable lowcore
> support in 6.10, which this patch fixes up. And it is already included
> in 6.11, starting from v6.11-rc5.

Great, it turned out to also break the build, so that's a good reason to
drop it :)

now removed,

greg k-h

Re: [PATCH 6.6 00/91] 6.6.52-rc1 review

[Kexy Biscuit]

On 9/16/2024 7:43 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.52 release.
> There are 91 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 18 Sep 2024 11:42:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.52-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Building passed on amd64, arm64, loongarch64, ppc64el, and riscv64. 
Smoke testing passed on 9 amd64 and 1 arm64 test systems.

Tested-by: Kexy Biscuit <kexybiscuit@aosc.io>

https://github.com/AOSC-Dev/aosc-os-abbs/pull/8027
-- 
Best Regards,
Kexy Biscuit