From: <gregkh@linuxfoundation.org>
To: val@packett.cool,heiko@sntech.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] drm/rockchip: vop: clear DMA stop bit on RK3066" failed to apply to 5.4-stable tree
Date: Mon, 07 Oct 2024 17:36:06 +0200 [thread overview]
Message-ID: <2024100706-contort-navigator-6ca8@gregkh> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 6b44aa559d6c7f4ea591ef9d2352a7250138d62a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024100706-contort-navigator-6ca8@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
6b44aa559d6c ("drm/rockchip: vop: clear DMA stop bit on RK3066")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6b44aa559d6c7f4ea591ef9d2352a7250138d62a Mon Sep 17 00:00:00 2001
From: Val Packett <val@packett.cool>
Date: Mon, 24 Jun 2024 17:40:48 -0300
Subject: [PATCH] drm/rockchip: vop: clear DMA stop bit on RK3066
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame
and needs the driver to acknowledge that by clearing the bit.
Unless we clear it "between" frames, the RGB output only shows noise
instead of the picture. atomic_flush is the place for it that least
affects other code (doing it on vblank would require converting all
other usages of the reg_lock to spin_(un)lock_irq, which would affect
performance for everyone).
This seems to be a redundant synchronization mechanism that was removed
in later iterations of the VOP hardware block.
Fixes: f4a6de855eae ("drm: rockchip: vop: add rk3066 vop definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-2-val@packett.cool
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index a13473b2d54c..e88fbd5685a3 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1583,6 +1583,10 @@ static void vop_crtc_atomic_flush(struct drm_crtc *crtc,
VOP_AFBC_SET(vop, enable, s->enable_afbc);
vop_cfg_done(vop);
+ /* Ack the DMA transfer of the previous frame (RK3066). */
+ if (VOP_HAS_REG(vop, common, dma_stop))
+ VOP_REG_SET(vop, common, dma_stop, 0);
+
spin_unlock(&vop->reg_lock);
/*
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
index b33e5bdc26be..0cf512cc1614 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h
@@ -122,6 +122,7 @@ struct vop_common {
struct vop_reg lut_buffer_index;
struct vop_reg gate_en;
struct vop_reg mmu_en;
+ struct vop_reg dma_stop;
struct vop_reg out_mode;
struct vop_reg standby;
};
diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index b9ee02061d5b..9bcb40a640af 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -466,6 +466,7 @@ static const struct vop_output rk3066_output = {
};
static const struct vop_common rk3066_common = {
+ .dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0),
.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),
reply other threads:[~2024-10-07 15:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024100706-contort-navigator-6ca8@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=heiko@sntech.de \
--cc=stable@vger.kernel.org \
--cc=val@packett.cool \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).