From: <gregkh@linuxfoundation.org>
To: selvarasu.g@samsung.com,Thinh.Nguyen@synopsys.com,gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] usb: dwc3: core: Stop processing of pending events if" failed to apply to 4.19-stable tree
Date: Mon, 14 Oct 2024 12:26:39 +0200 [thread overview]
Message-ID: <2024101439-storable-submerge-797a@gregkh> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 0d410e8913f5cffebcca79ffdd596009d4a13a28
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024101439-storable-submerge-797a@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 0d410e8913f5cffebcca79ffdd596009d4a13a28 Mon Sep 17 00:00:00 2001
From: Selvarasu Ganesan <selvarasu.g@samsung.com>
Date: Tue, 17 Sep 2024 04:48:09 +0530
Subject: [PATCH] usb: dwc3: core: Stop processing of pending events if
controller is halted
This commit addresses an issue where events were being processed when
the controller was in a halted state. To fix this issue by stop
processing the events as the event count was considered stale or
invalid when the controller was halted.
Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: stable@kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 40611a5511c1..21740e2b8f07 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -544,6 +544,7 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
+ u32 reg;
if (!dwc->ev_buf)
return 0;
@@ -556,8 +557,10 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
upper_32_bits(evt->dma));
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
DWC3_GEVNTSIZ_SIZE(evt->length));
- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+ /* Clear any stale event */
+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), reg);
return 0;
}
@@ -584,7 +587,10 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
| DWC3_GEVNTSIZ_SIZE(0));
- dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+
+ /* Clear any stale event */
+ reg = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), reg);
}
static void dwc3_core_num_eps(struct dwc3 *dwc)
@@ -2499,7 +2505,11 @@ static int dwc3_runtime_resume(struct device *dev)
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
- dwc3_gadget_process_pending_events(dwc);
+ if (dwc->pending_events) {
+ pm_runtime_put(dwc->dev);
+ dwc->pending_events = false;
+ enable_irq(dwc->irq_gadget);
+ }
break;
case DWC3_GCTL_PRTCAP_HOST:
default:
@@ -2587,6 +2597,12 @@ static void dwc3_complete(struct device *dev)
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
.complete = dwc3_complete,
+
+ /*
+ * Runtime suspend halts the controller on disconnection. It relies on
+ * platforms with custom connection notification to start the controller
+ * again.
+ */
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c71240e8f7c7..9c508e0c5cdf 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1675,7 +1675,6 @@ static inline void dwc3_otg_host_init(struct dwc3 *dwc)
#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
int dwc3_gadget_suspend(struct dwc3 *dwc);
int dwc3_gadget_resume(struct dwc3 *dwc);
-void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
#else
static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
{
@@ -1687,9 +1686,6 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc)
return 0;
}
-static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
-{
-}
#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 291bc549935b..10178e5eda5a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4728,14 +4728,3 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
return dwc3_gadget_soft_connect(dwc);
}
-
-void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
-{
- if (dwc->pending_events) {
- dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
- dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf);
- pm_runtime_put(dwc->dev);
- dwc->pending_events = false;
- enable_irq(dwc->irq_gadget);
- }
-}
reply other threads:[~2024-10-14 10:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024101439-storable-submerge-797a@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=selvarasu.g@samsung.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox