From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org,
"Mathias Nyman" <mathias.nyman@linux.intel.com>,
"Uday M Bhat" <uday.m.bhat@intel.com>,
"Łukasz Bartosik" <ukaszb@chromium.org>,
stable@vger.kernel.org
Subject: [PATCH 4/4] xhci: dbc: honor usb transfer size boundaries.
Date: Wed, 16 Oct 2024 17:00:00 +0300 [thread overview]
Message-ID: <20241016140000.783905-5-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20241016140000.783905-1-mathias.nyman@linux.intel.com>
Treat each completed full size write to /dev/ttyDBC0 as a separate usb
transfer. Make sure the size of the TRBs matches the size of the tty
write by first queuing as many max packet size TRBs as possible up to
the last TRB which will be cut short to match the size of the tty write.
This solves an issue where userspace writes several transfers back to
back via /dev/ttyDBC0 into a kfifo before dbgtty can find available
request to turn that kfifo data into TRBs on the transfer ring.
The boundary between transfer was lost as xhci-dbgtty then turned
everyting in the kfifo into as many 'max packet size' TRBs as possible.
DbC would then send more data to the host than intended for that
transfer, causing host to issue a babble error.
Refuse to write more data to kfifo until previous tty write data is
turned into properly sized TRBs with data size boundaries matching tty
write size
Tested-by: Uday M Bhat <uday.m.bhat@intel.com>
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-dbgcap.h | 1 +
drivers/usb/host/xhci-dbgtty.c | 55 ++++++++++++++++++++++++++++++----
2 files changed, 51 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 8ec813b6e9fd..9dc8f4d8077c 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -110,6 +110,7 @@ struct dbc_port {
struct tasklet_struct push;
struct list_head write_pool;
+ unsigned int tx_boundary;
bool registered;
};
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index b8e78867e25a..d719c16ea30b 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -24,6 +24,29 @@ static inline struct dbc_port *dbc_to_port(struct xhci_dbc *dbc)
return dbc->priv;
}
+static unsigned int
+dbc_kfifo_to_req(struct dbc_port *port, char *packet)
+{
+ unsigned int len;
+
+ len = kfifo_len(&port->port.xmit_fifo);
+
+ if (len == 0)
+ return 0;
+
+ len = min(len, DBC_MAX_PACKET);
+
+ if (port->tx_boundary)
+ len = min(port->tx_boundary, len);
+
+ len = kfifo_out(&port->port.xmit_fifo, packet, len);
+
+ if (port->tx_boundary)
+ port->tx_boundary -= len;
+
+ return len;
+}
+
static int dbc_start_tx(struct dbc_port *port)
__releases(&port->port_lock)
__acquires(&port->port_lock)
@@ -36,7 +59,7 @@ static int dbc_start_tx(struct dbc_port *port)
while (!list_empty(pool)) {
req = list_entry(pool->next, struct dbc_request, list_pool);
- len = kfifo_out(&port->port.xmit_fifo, req->buf, DBC_MAX_PACKET);
+ len = dbc_kfifo_to_req(port, req->buf);
if (len == 0)
break;
do_tty_wake = true;
@@ -200,14 +223,32 @@ static ssize_t dbc_tty_write(struct tty_struct *tty, const u8 *buf,
{
struct dbc_port *port = tty->driver_data;
unsigned long flags;
+ unsigned int written = 0;
spin_lock_irqsave(&port->port_lock, flags);
- if (count)
- count = kfifo_in(&port->port.xmit_fifo, buf, count);
- dbc_start_tx(port);
+
+ /*
+ * Treat tty write as one usb transfer. Make sure the writes are turned
+ * into TRB request having the same size boundaries as the tty writes.
+ * Don't add data to kfifo before previous write is turned into TRBs
+ */
+ if (port->tx_boundary) {
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ return 0;
+ }
+
+ if (count) {
+ written = kfifo_in(&port->port.xmit_fifo, buf, count);
+
+ if (written == count)
+ port->tx_boundary = kfifo_len(&port->port.xmit_fifo);
+
+ dbc_start_tx(port);
+ }
+
spin_unlock_irqrestore(&port->port_lock, flags);
- return count;
+ return written;
}
static int dbc_tty_put_char(struct tty_struct *tty, u8 ch)
@@ -241,6 +282,10 @@ static unsigned int dbc_tty_write_room(struct tty_struct *tty)
spin_lock_irqsave(&port->port_lock, flags);
room = kfifo_avail(&port->port.xmit_fifo);
+
+ if (port->tx_boundary)
+ room = 0;
+
spin_unlock_irqrestore(&port->port_lock, flags);
return room;
--
2.25.1
prev parent reply other threads:[~2024-10-16 13:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20241016140000.783905-1-mathias.nyman@linux.intel.com>
2024-10-16 13:59 ` [PATCH 1/4] xhci: Fix incorrect stream context type macro Mathias Nyman
2024-10-16 13:59 ` [PATCH 2/4] xhci: Mitigate failed set dequeue pointer commands Mathias Nyman
2024-10-17 6:40 ` Michał Pecio
2024-10-17 13:10 ` Mathias Nyman
2024-10-17 16:14 ` Michał Pecio
2024-10-18 9:59 ` Mathias Nyman
2024-10-16 14:00 ` Mathias Nyman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241016140000.783905-5-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=uday.m.bhat@intel.com \
--cc=ukaszb@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox