[PATCH 5.10 37/52] Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream.

Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:

kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout

According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:

 'When an interrupt transfer involves more data than can fit in one
 data payload of the currently established maximum size, all data
 payloads are required to be maximum-sized except for the last data
 payload, which will contain the remaining data. An interrupt transfer
 is complete when the endpoint does one of the following:

 • Has transferred exactly the amount of data expected
 • Transfers a packet with a payload size less than wMaxPacketSize or
 transfers a zero-length packet'

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -928,10 +928,15 @@ static int btusb_submit_intr_urb(struct
 	if (!urb)
 		return -ENOMEM;
 
-	/* Use maximum HCI Event size so the USB stack handles
-	 * ZPL/short-transfer automatically.
-	 */
-	size = HCI_MAX_EVENT_SIZE;
+	if (le16_to_cpu(data->udev->descriptor.idVendor)  == 0x0a12 &&
+	    le16_to_cpu(data->udev->descriptor.idProduct) == 0x0001)
+		/* Fake CSR devices don't seem to support sort-transter */
+		size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
+	else
+		/* Use maximum HCI Event size so the USB stack handles
+		 * ZPL/short-transfer automatically.
+		 */
+		size = HCI_MAX_EVENT_SIZE;
 
 	buf = kmalloc(size, mem_flags);
 	if (!buf) {