[PATCH 5.10 00/52] 5.10.228-rc1 review

[PATCH 5.10 00/52] 5.10.228-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.228 release.
There are 52 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.228-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.228-rc1

Vasiliy Kovalev <kovalev@altlinux.org>
    ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: propagate directory read errors from nilfs_find_entry()

Paolo Abeni <pabeni@redhat.com>
    tcp: fix mptcp DSS corruption due to large pmtu xmit

Paolo Abeni <pabeni@redhat.com>
    mptcp: handle consistently DSS corruption

Geliang Tang <geliang.tang@suse.com>
    mptcp: track and update contiguous data status

Marc Zyngier <maz@kernel.org>
    irqchip/gic-v4: Don't allow a VMOVP on a dying VPE

Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
    x86/entry_32: Clear CPU buffers after register restore in NMI return

Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
    x86/entry_32: Do not clobber user EFLAGS.ZF

Zhang Rui <rui.zhang@intel.com>
    x86/apic: Always explicitly disarm TSC-deadline timer

Nathan Chancellor <nathan@kernel.org>
    x86/resctrl: Annotate get_mem_config() functions as __init

Takashi Iwai <tiwai@suse.de>
    parport: Proper fix for array out-of-bounds access

Daniele Palmas <dnlplm@gmail.com>
    USB: serial: option: add Telit FN920C04 MBIM compositions

Benjamin B. Frost <benjamin@geanix.com>
    USB: serial: option: add support for Quectel EG916Q-GL

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Fix incorrect stream context type macro

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001

Aaron Thompson <dev@aaront.org>
    Bluetooth: Remove debugfs directory on module init failure

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: adc: ti-ads124s08: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

Emil Gedenryd <emil.gedenryd@axis.com>
    iio: light: opt3001: add missing full-scale range value

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: light: veml6030: fix IIO device retrieval from embedded device

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: light: veml6030: fix ALS sensor resolution

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig

Javier Carrasco <javier.carrasco.cruz@gmail.com>
    iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig

Nikolay Kuratov <kniv@yandex-team.ru>
    drm/vmwgfx: Handle surface check failure correctly

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/radeon: Fix encoder->possible_clones

Jens Axboe <axboe@kernel.dk>
    io_uring/sqpoll: close race on waiting for sqring entries

Omar Sandoval <osandov@fb.com>
    blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race

Johannes Wikner <kwikner@ethz.ch>
    x86/bugs: Do not use UNTRAIN_RET with IBPB on entry

Johannes Wikner <kwikner@ethz.ch>
    x86/bugs: Skip RSB fill at VMEXIT

Johannes Wikner <kwikner@ethz.ch>
    x86/entry: Have entry_ibpb() invalidate return predictions

Johannes Wikner <kwikner@ethz.ch>
    x86/cpufeatures: Add a IBPB_NO_RET BUG flag

Jim Mattson <jmattson@google.com>
    x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET

Michael Mueller <mimu@linux.ibm.com>
    KVM: s390: Change virtual to physical address access in diag 0x258 handler

Thomas Weißschuh <thomas.weissschuh@linutronix.de>
    s390/sclp_vt220: Convert newlines to CRLF instead of LFCR

Felix Moessbauer <felix.moessbauer@siemens.com>
    io_uring/sqpoll: do not put cpumask on stack

Jens Axboe <axboe@kernel.dk>
    io_uring/sqpoll: retain test for whether the CPU is valid

Felix Moessbauer <felix.moessbauer@siemens.com>
    io_uring/sqpoll: do not allow pinning outside of cpuset

Breno Leitao <leitao@debian.org>
    KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()

Johannes Berg <johannes.berg@intel.com>
    wifi: mac80211: fix potential key use-after-free

Liu Shixin <liushixin2@huawei.com>
    mm/swapfile: skip HugeTLB pages for unuse_vma

OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
    fat: fix uninitialized variable

Nianyao Tang <tangnianyao@huawei.com>
    irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1

Oleksij Rempel <linux@rempel-privat.de>
    net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY

Mark Rutland <mark.rutland@arm.com>
    arm64: probes: Fix simulate_ldr*_literal()

Mark Rutland <mark.rutland@arm.com>
    arm64: probes: Remove broken LDR (literal) uprobe support

Jinjie Ruan <ruanjinjie@huawei.com>
    posix-clock: Fix missing timespec64 check in pc_clock_settime()

Wei Fang <wei.fang@nxp.com>
    net: enetc: add missing static descriptor and inline keyword

Vasiliy Kovalev <kovalev@altlinux.org>
    ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm64/kernel/probes/decode-insn.c             | 16 ++++---
 arch/arm64/kernel/probes/simulate-insn.c           | 18 +++-----
 arch/powerpc/mm/numa.c                             |  6 +--
 arch/s390/kvm/diag.c                               |  2 +-
 arch/x86/entry/entry.S                             |  5 +++
 arch/x86/entry/entry_32.S                          |  6 ++-
 arch/x86/include/asm/cpufeatures.h                 |  5 ++-
 arch/x86/kernel/apic/apic.c                        | 14 +++++-
 arch/x86/kernel/cpu/bugs.c                         | 32 ++++++++++++++
 arch/x86/kernel/cpu/common.c                       |  3 ++
 arch/x86/kernel/cpu/resctrl/core.c                 |  4 +-
 block/blk-rq-qos.c                                 |  2 +-
 drivers/bluetooth/btusb.c                          | 13 ++++--
 drivers/gpu/drm/radeon/radeon_encoders.c           |  2 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c                |  1 +
 drivers/iio/adc/Kconfig                            |  4 ++
 .../iio/common/hid-sensors/hid-sensor-trigger.c    |  2 +-
 drivers/iio/dac/Kconfig                            |  3 ++
 drivers/iio/light/opt3001.c                        |  4 ++
 drivers/iio/light/veml6030.c                       |  5 +--
 drivers/iio/proximity/Kconfig                      |  2 +
 drivers/irqchip/irq-gic-v3-its.c                   | 26 ++++++++---
 drivers/net/ethernet/cadence/macb_main.c           | 14 ++++--
 drivers/parport/procfs.c                           | 22 +++++-----
 drivers/s390/char/sclp_vt220.c                     |  4 +-
 drivers/usb/host/xhci.h                            |  2 +-
 drivers/usb/serial/option.c                        |  8 ++++
 fs/fat/namei_vfat.c                                |  2 +-
 fs/nilfs2/dir.c                                    | 50 ++++++++++++----------
 fs/nilfs2/namei.c                                  | 39 +++++++++++------
 fs/nilfs2/nilfs.h                                  |  2 +-
 include/linux/fsl/enetc_mdio.h                     |  3 +-
 include/linux/irqchip/arm-gic-v4.h                 |  4 +-
 io_uring/io_uring.c                                | 21 ++++++++-
 kernel/time/posix-clock.c                          |  3 ++
 mm/swapfile.c                                      |  2 +-
 net/bluetooth/af_bluetooth.c                       |  1 +
 net/ipv4/tcp_output.c                              |  2 +-
 net/mac80211/cfg.c                                 |  3 ++
 net/mac80211/key.c                                 |  2 +-
 net/mptcp/mib.c                                    |  2 +
 net/mptcp/mib.h                                    |  2 +
 net/mptcp/protocol.c                               | 26 +++++++++--
 net/mptcp/protocol.h                               |  1 +
 net/mptcp/subflow.c                                |  3 +-
 sound/pci/hda/patch_conexant.c                     | 19 ++++++++
 virt/kvm/kvm_main.c                                |  5 ++-
 48 files changed, 308 insertions(+), 113 deletions(-)

[PATCH 5.10 01/52] ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasiliy Kovalev <kovalev@altlinux.org>

commit 9988844c457f6f17fb2e75aa000b6c3b1b673bb9 upstream.

There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.

However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working     (linux): Pin-ctls: 0xc0: OUT HP

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.

Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_conexant.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -234,6 +234,7 @@ enum {
 	CXT_FIXUP_HP_SPECTRE,
 	CXT_FIXUP_HP_GATE_MIC,
 	CXT_FIXUP_MUTE_LED_GPIO,
+	CXT_FIXUP_HP_ELITEONE_OUT_DIS,
 	CXT_FIXUP_HP_ZBOOK_MUTE_LED,
 	CXT_FIXUP_HEADSET_MIC,
 	CXT_FIXUP_HP_MIC_NO_PRESENCE,
@@ -251,6 +252,19 @@ static void cxt_fixup_stereo_dmic(struct
 	spec->gen.inv_dmic_split = 1;
 }
 
+/* fix widget control pin settings */
+static void cxt_fixup_update_pinctl(struct hda_codec *codec,
+				   const struct hda_fixup *fix, int action)
+{
+	if (action == HDA_FIXUP_ACT_PROBE) {
+		/* Unset OUT_EN for this Node pin, leaving only HP_EN.
+		 * This is the value stored in the codec register after
+		 * the correct initialization of the previous windows boot.
+		 */
+		snd_hda_set_pin_ctl(codec, 0x1d, AC_PINCTL_HP_EN);
+	}
+}
+
 static void cxt5066_increase_mic_boost(struct hda_codec *codec,
 				   const struct hda_fixup *fix, int action)
 {
@@ -902,6 +916,10 @@ static const struct hda_fixup cxt_fixups
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_mute_led_gpio,
 	},
+	[CXT_FIXUP_HP_ELITEONE_OUT_DIS] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = cxt_fixup_update_pinctl,
+	},
 	[CXT_FIXUP_HP_ZBOOK_MUTE_LED] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_hp_zbook_mute_led,
@@ -992,6 +1010,7 @@ static const struct snd_pci_quirk cxt506
 	SND_PCI_QUIRK(0x103c, 0x83b2, "HP EliteBook 840 G5", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x83b3, "HP EliteBook 830 G5", CXT_FIXUP_HP_DOCK),
 	SND_PCI_QUIRK(0x103c, 0x83d3, "HP ProBook 640 G4", CXT_FIXUP_HP_DOCK),
+	SND_PCI_QUIRK(0x103c, 0x83e5, "HP EliteOne 1000 G2", CXT_FIXUP_HP_ELITEONE_OUT_DIS),
 	SND_PCI_QUIRK(0x103c, 0x8402, "HP ProBook 645 G4", CXT_FIXUP_MUTE_LED_GPIO),
 	SND_PCI_QUIRK(0x103c, 0x8427, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x844f, "HP ZBook Studio G5", CXT_FIXUP_HP_ZBOOK_MUTE_LED),

[PATCH 5.10 02/52] net: enetc: add missing static descriptor and inline keyword

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Fang <wei.fang@nxp.com>

commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream.

Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.

include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
      62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
         |                  ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
      62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
         | ^
         | static
8 warnings generated.

Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/fsl/enetc_mdio.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/include/linux/fsl/enetc_mdio.h
+++ b/include/linux/fsl/enetc_mdio.h
@@ -48,7 +48,8 @@ static inline int enetc_mdio_read(struct
 static inline int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum,
 				   u16 value)
 { return -EINVAL; }
-struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
+static inline struct enetc_hw *enetc_hw_alloc(struct device *dev,
+					      void __iomem *port_regs)
 { return ERR_PTR(-EINVAL); }
 
 #endif

[PATCH 5.10 03/52] posix-clock: Fix missing timespec64 check in pc_clock_settime()

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jinjie Ruan <ruanjinjie@huawei.com>

commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream.

As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().

As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.

There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself.

Cc: stable@vger.kernel.org
Fixes: 0606f422b453 ("posix clocks: Introduce dynamic clocks")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/time/posix-clock.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -299,6 +299,9 @@ static int pc_clock_settime(clockid_t id
 		goto out;
 	}
 
+	if (!timespec64_valid_strict(ts))
+		return -EINVAL;
+
 	if (cd.clk->ops.clock_settime)
 		err = cd.clk->ops.clock_settime(cd.clk, ts);
 	else

[PATCH 5.10 04/52] arm64: probes: Remove broken LDR (literal) uprobe support

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit acc450aa07099d071b18174c22a1119c57da8227 upstream.

The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.

There are three key problems:

1) The plain C accesses do not have corresponding extable entries, and
   thus if they encounter a fault the kernel will treat these as
   unintentional accesses to user memory, resulting in a BUG() which
   will kill the kernel thread, and likely lead to further issues (e.g.
   lockup or panic()).

2) The plain C accesses are subject to HW PAN and SW PAN, and so when
   either is in use, any attempt to simulate an access to user memory
   will fault. Thus neither simulate_ldr_literal() nor
   simulate_ldrsw_literal() can do anything useful when simulating a
   user instruction on any system with HW PAN or SW PAN.

3) The plain C accesses are privileged, as they run in kernel context,
   and in practice can access a small range of kernel virtual addresses.
   The instructions they simulate have a range of +/-1MiB, and since the
   simulated instructions must itself be a user instructions in the
   TTBR0 address range, these can address the final 1MiB of the TTBR1
   acddress range by wrapping downwards from an address in the first
   1MiB of the TTBR0 address range.

   In contemporary kernels the last 8MiB of TTBR1 address range is
   reserved, and accesses to this will always fault, meaning this is no
   worse than (1).

   Historically, it was theoretically possible for the linear map or
   vmemmap to spill into the final 8MiB of the TTBR1 address range, but
   in practice this is extremely unlikely to occur as this would
   require either:

   * Having enough physical memory to fill the entire linear map all the
     way to the final 1MiB of the TTBR1 address range.

   * Getting unlucky with KASLR randomization of the linear map such
     that the populated region happens to overlap with the last 1MiB of
     the TTBR address range.

   ... and in either case if we were to spill into the final page there
   would be larger problems as the final page would alias with error
   pointers.

Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.

Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.

Fixes: 9842ceae9fa8 ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/probes/decode-insn.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -99,10 +99,6 @@ arm_probe_decode_insn(probe_opcode_t ins
 	    aarch64_insn_is_blr(insn) ||
 	    aarch64_insn_is_ret(insn)) {
 		api->handler = simulate_br_blr_ret;
-	} else if (aarch64_insn_is_ldr_lit(insn)) {
-		api->handler = simulate_ldr_literal;
-	} else if (aarch64_insn_is_ldrsw_lit(insn)) {
-		api->handler = simulate_ldrsw_literal;
 	} else {
 		/*
 		 * Instruction cannot be stepped out-of-line and we don't
@@ -140,6 +136,17 @@ arm_kprobe_decode_insn(kprobe_opcode_t *
 	probe_opcode_t insn = le32_to_cpu(*addr);
 	probe_opcode_t *scan_end = NULL;
 	unsigned long size = 0, offset = 0;
+	struct arch_probe_insn *api = &asi->api;
+
+	if (aarch64_insn_is_ldr_lit(insn)) {
+		api->handler = simulate_ldr_literal;
+		decoded = INSN_GOOD_NO_SLOT;
+	} else if (aarch64_insn_is_ldrsw_lit(insn)) {
+		api->handler = simulate_ldrsw_literal;
+		decoded = INSN_GOOD_NO_SLOT;
+	} else {
+		decoded = arm_probe_decode_insn(insn, &asi->api);
+	}
 
 	/*
 	 * If there's a symbol defined in front of and near enough to
@@ -157,7 +164,6 @@ arm_kprobe_decode_insn(kprobe_opcode_t *
 		else
 			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
 	}
-	decoded = arm_probe_decode_insn(insn, &asi->api);
 
 	if (decoded != INSN_REJECTED && scan_end)
 		if (is_probed_address_atomic(addr - 1, scan_end))

[PATCH 5.10 05/52] arm64: probes: Fix simulate_ldr*_literal()

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream.

The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).

Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).

Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.

Fixes: 39a67d49ba35 ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/probes/simulate-insn.c |   18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

--- a/arch/arm64/kernel/probes/simulate-insn.c
+++ b/arch/arm64/kernel/probes/simulate-insn.c
@@ -170,17 +170,15 @@ simulate_tbz_tbnz(u32 opcode, long addr,
 void __kprobes
 simulate_ldr_literal(u32 opcode, long addr, struct pt_regs *regs)
 {
-	u64 *load_addr;
+	unsigned long load_addr;
 	int xn = opcode & 0x1f;
-	int disp;
 
-	disp = ldr_displacement(opcode);
-	load_addr = (u64 *) (addr + disp);
+	load_addr = addr + ldr_displacement(opcode);
 
 	if (opcode & (1 << 30))	/* x0-x30 */
-		set_x_reg(regs, xn, *load_addr);
+		set_x_reg(regs, xn, READ_ONCE(*(u64 *)load_addr));
 	else			/* w0-w30 */
-		set_w_reg(regs, xn, *load_addr);
+		set_w_reg(regs, xn, READ_ONCE(*(u32 *)load_addr));
 
 	instruction_pointer_set(regs, instruction_pointer(regs) + 4);
 }
@@ -188,14 +186,12 @@ simulate_ldr_literal(u32 opcode, long ad
 void __kprobes
 simulate_ldrsw_literal(u32 opcode, long addr, struct pt_regs *regs)
 {
-	s32 *load_addr;
+	unsigned long load_addr;
 	int xn = opcode & 0x1f;
-	int disp;
 
-	disp = ldr_displacement(opcode);
-	load_addr = (s32 *) (addr + disp);
+	load_addr = addr + ldr_displacement(opcode);
 
-	set_x_reg(regs, xn, *load_addr);
+	set_x_reg(regs, xn, READ_ONCE(*(s32 *)load_addr));
 
 	instruction_pointer_set(regs, instruction_pointer(regs) + 4);
 }

[PATCH 5.10 06/52] net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleksij Rempel <o.rempel@pengutronix.de>

commit d0c3601f2c4e12e7689b0f46ebc17525250ea8c3 upstream.

A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.

The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31

This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
  - The device tree contains a fixed-link node.
  - There is no "mdio" child node in the device tree.

If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs  attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.

Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.

Fixes: 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/cadence/macb_main.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -742,9 +742,6 @@ static int macb_mdiobus_register(struct
 {
 	struct device_node *child, *np = bp->pdev->dev.of_node;
 
-	if (of_phy_is_fixed_link(np))
-		return mdiobus_register(bp->mii_bus);
-
 	/* Only create the PHY from the device tree if at least one PHY is
 	 * described. Otherwise scan the entire MDIO bus. We do this to support
 	 * old device tree that did not follow the best practices and did not
@@ -765,8 +762,19 @@ static int macb_mdiobus_register(struct
 
 static int macb_mii_init(struct macb *bp)
 {
+	struct device_node *child, *np = bp->pdev->dev.of_node;
 	int err = -ENXIO;
 
+	/* With fixed-link, we don't need to register the MDIO bus,
+	 * except if we have a child named "mdio" in the device tree.
+	 * In that case, some devices may be attached to the MACB's MDIO bus.
+	 */
+	child = of_get_child_by_name(np, "mdio");
+	if (child)
+		of_node_put(child);
+	else if (of_phy_is_fixed_link(np))
+		return macb_mii_probe(bp->dev);
+
 	/* Enable management port */
 	macb_writel(bp, NCR, MACB_BIT(MPE));
 

[PATCH 5.10 07/52] irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nianyao Tang <tangnianyao@huawei.com>

commit 80e9963fb3b5509dfcabe9652d56bf4b35542055 upstream.

As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19):

 "A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
  command queue does not show the command as consumed until all of its
  effects are completed."

Furthermore, VSYNC is allowed to deliver an SError when referencing a
non existent VPE.

By these definitions, a VMAPP followed by a VSYNC is a bug, as the
later references a VPE that has been unmapped by the former.

Fix it by eliding the VSYNC in this scenario.

Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/irqchip/irq-gic-v3-its.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -779,6 +779,7 @@ static struct its_vpe *its_build_vmapp_c
 					   struct its_cmd_block *cmd,
 					   struct its_cmd_desc *desc)
 {
+	struct its_vpe *vpe = valid_vpe(its, desc->its_vmapp_cmd.vpe);
 	unsigned long vpt_addr, vconf_addr;
 	u64 target;
 	bool alloc;
@@ -791,6 +792,11 @@ static struct its_vpe *its_build_vmapp_c
 		if (is_v4_1(its)) {
 			alloc = !atomic_dec_return(&desc->its_vmapp_cmd.vpe->vmapp_count);
 			its_encode_alloc(cmd, alloc);
+			/*
+			 * Unmapping a VPE is self-synchronizing on GICv4.1,
+			 * no need to issue a VSYNC.
+			 */
+			vpe = NULL;
 		}
 
 		goto out;
@@ -820,7 +826,7 @@ static struct its_vpe *its_build_vmapp_c
 out:
 	its_fixup_cmd(cmd);
 
-	return valid_vpe(its, desc->its_vmapp_cmd.vpe);
+	return vpe;
 }
 
 static struct its_vpe *its_build_vmapti_cmd(struct its_node *its,

[PATCH 5.10 08/52] fat: fix uninitialized variable

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

commit 963a7f4d3b90ee195b895ca06b95757fcba02d1a upstream.

syszbot produced this with a corrupted fs image.  In theory, however an IO
error would trigger this also.

This affects just an error report, so should not be a serious error.

Link: https://lkml.kernel.org/r/87r08wjsnh.fsf@mail.parknet.co.jp
Link: https://lkml.kernel.org/r/66ff2c95.050a0220.49194.03e9.GAE@google.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: syzbot+ef0d7bc412553291aa86@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fat/namei_vfat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -1019,7 +1019,7 @@ error_inode:
 	if (corrupt < 0) {
 		fat_fs_error(new_dir->i_sb,
 			     "%s: Filesystem corrupted (i_pos %lld)",
-			     __func__, sinfo.i_pos);
+			     __func__, new_i_pos);
 	}
 	goto out;
 }

[PATCH 5.10 09/52] mm/swapfile: skip HugeTLB pages for unuse_vma

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Shixin <liushixin2@huawei.com>

commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream.

I got a bad pud error and lost a 1GB HugeTLB when calling swapoff.  The
problem can be reproduced by the following steps:

 1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
 2. Swapout the above anonymous memory.
 3. run swapoff and we will get a bad pud error in kernel message:

  mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)

We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace.  And therefore the HugeTLB pages will never
be freed because we lost it from page table.  We can skip HugeTLB pages
for unuse_vma to fix it.

Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes: 0fe6e20b9c4c ("hugetlb, rmap: add reverse mapping for hugepage")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/swapfile.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2134,7 +2134,7 @@ static int unuse_mm(struct mm_struct *mm
 
 	mmap_read_lock(mm);
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		if (vma->anon_vma) {
+		if (vma->anon_vma && !is_vm_hugetlb_page(vma)) {
 			ret = unuse_vma(vma, type, frontswap,
 					fs_pages_to_unuse);
 			if (ret)

[PATCH 5.10 10/52] wifi: mac80211: fix potential key use-after-free

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 31db78a4923ef5e2008f2eed321811ca79e7f71b upstream.

When ieee80211_key_link() is called by ieee80211_gtk_rekey_add()
but returns 0 due to KRACK protection (identical key reinstall),
ieee80211_gtk_rekey_add() will still return a pointer into the
key, in a potential use-after-free. This normally doesn't happen
since it's only called by iwlwifi in case of WoWLAN rekey offload
which has its own KRACK protection, but still better to fix, do
that by returning an error code and converting that to success on
the cfg80211 boundary only, leaving the error for bad callers of
ieee80211_gtk_rekey_add().

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Sherry: bp to fix CVE-2023-52530, resolved minor conflicts in
  net/mac80211/cfg.c because of context change due to missing commit
  23a5f0af6ff4 ("wifi: mac80211: remove cipher scheme support")
  ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")]
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/cfg.c |    3 +++
 net/mac80211/key.c |    2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -509,6 +509,9 @@ static int ieee80211_add_key(struct wiph
 		sta->cipher_scheme = cs;
 
 	err = ieee80211_key_link(key, sdata, sta);
+	/* KRACK protection, shouldn't happen but just silently accept key */
+	if (err == -EALREADY)
+		err = 0;
 
  out_unlock:
 	mutex_unlock(&local->sta_mtx);
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -843,7 +843,7 @@ int ieee80211_key_link(struct ieee80211_
 	 */
 	if (ieee80211_key_identical(sdata, old_key, key)) {
 		ieee80211_key_free_unused(key);
-		ret = 0;
+		ret = -EALREADY;
 		goto out;
 	}
 

[PATCH 5.10 11/52] KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Breno Leitao <leitao@debian.org>

commit 49f683b41f28918df3e51ddc0d928cb2e934ccdb upstream.

Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic.  In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:

  CPU0                              CPU1
  last_boosted_vcpu = 0xff;

                                    (last_boosted_vcpu = 0x100)
                                    last_boosted_vcpu[15:8] = 0x01;
  i = (last_boosted_vcpu = 0x1ff)
                                    last_boosted_vcpu[7:0] = 0x00;

  vcpu = kvm->vcpu_array[0x1ff];

As detected by KCSAN:

  BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm]

  write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16:
  kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm
  handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
  vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
		 arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
  vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
  kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
  kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
  __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
  __x64_sys_ioctl (fs/ioctl.c:890)
  x64_sys_call (arch/x86/entry/syscall_64.c:33)
  do_syscall_64 (arch/x86/entry/common.c:?)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

  read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4:
  kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm
  handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
  vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
			arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
  vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
  kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
  kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
  __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
  __x64_sys_ioctl (fs/ioctl.c:890)
  x64_sys_call (arch/x86/entry/syscall_64.c:33)
  do_syscall_64 (arch/x86/entry/common.c:?)
  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

  value changed: 0x00000012 -> 0x00000000

Fixes: 217ece6129f2 ("KVM: use yield_to instead of sleep in kvm_vcpu_on_spin")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240510092353.2261824-1-leitao@debian.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 virt/kvm/kvm_main.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -3090,12 +3090,13 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *m
 {
 	struct kvm *kvm = me->kvm;
 	struct kvm_vcpu *vcpu;
-	int last_boosted_vcpu = me->kvm->last_boosted_vcpu;
+	int last_boosted_vcpu;
 	int yielded = 0;
 	int try = 3;
 	int pass;
 	int i;
 
+	last_boosted_vcpu = READ_ONCE(kvm->last_boosted_vcpu);
 	kvm_vcpu_set_in_spin_loop(me, true);
 	/*
 	 * We boost the priority of a VCPU that is runnable but not
@@ -3126,7 +3127,7 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *m
 
 			yielded = kvm_vcpu_yield_to(vcpu);
 			if (yielded > 0) {
-				kvm->last_boosted_vcpu = i;
+				WRITE_ONCE(kvm->last_boosted_vcpu, i);
 				break;
 			} else if (yielded < 0) {
 				try--;

[PATCH 5.10 12/52] io_uring/sqpoll: do not allow pinning outside of cpuset

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Moessbauer <felix.moessbauer@siemens.com>

commit f011c9cf04c06f16b24f583d313d3c012e589e50 upstream.

The submit queue polling threads are userland threads that just never
exit to the userland. When creating the thread with IORING_SETUP_SQ_AFF,
the affinity of the poller thread is set to the cpu specified in
sq_thread_cpu. However, this CPU can be outside of the cpuset defined
by the cgroup cpuset controller. This violates the rules defined by the
cpuset controller and is a potential issue for realtime applications.

In b7ed6d8ffd6 we fixed the default affinity of the poller thread, in
case no explicit pinning is required by inheriting the one of the
creating task. In case of explicit pinning, the check is more
complicated, as also a cpu outside of the parent cpumask is allowed.
We implemented this by using cpuset_cpus_allowed (that has support for
cgroup cpusets) and testing if the requested cpu is in the set.

Fixes: 37d1e2e3642e ("io_uring: move SQPOLL thread io-wq forked worker")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240909150036.55921-1-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -56,6 +56,7 @@
 #include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/percpu.h>
+#include <linux/cpuset.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
 #include <linux/bvec.h>
@@ -8571,10 +8572,12 @@ static int io_sq_offload_create(struct i
 			return 0;
 
 		if (p->flags & IORING_SETUP_SQ_AFF) {
+			struct cpumask allowed_mask;
 			int cpu = p->sq_thread_cpu;
 
 			ret = -EINVAL;
-			if (cpu >= nr_cpu_ids || !cpu_online(cpu))
+			cpuset_cpus_allowed(current, &allowed_mask);
+			if (!cpumask_test_cpu(cpu, &allowed_mask))
 				goto err_sqpoll;
 			sqd->sq_cpu = cpu;
 		} else {

[PATCH 5.10 13/52] io_uring/sqpoll: retain test for whether the CPU is valid

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

commit a09c17240bdf2e9fa6d0591afa9448b59785f7d4 upstream.

A recent commit ensured that SQPOLL cannot be setup with a CPU that
isn't in the current tasks cpuset, but it also dropped testing whether
the CPU is valid in the first place. Without that, if a task passes in
a CPU value that is too high, the following KASAN splat can get
triggered:

BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4
Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391

CPU: 4 UID: 1000 PID: 1391 Comm: wq-aff.t Not tainted 6.11.0-rc7-00227-g371c468f4db6 #7080
Hardware name: linux,dummy-virt (DT)
Call trace:
 dump_backtrace.part.0+0xcc/0xe0
 show_stack+0x14/0x1c
 dump_stack_lvl+0x58/0x74
 print_report+0x16c/0x4c8
 kasan_report+0x9c/0xe4
 __asan_report_load8_noabort+0x1c/0x24
 io_sq_offload_create+0x858/0xaa4
 io_uring_setup+0x1394/0x17c4
 __arm64_sys_io_uring_setup+0x6c/0x180
 invoke_syscall+0x6c/0x260
 el0_svc_common.constprop.0+0x158/0x224
 do_el0_svc+0x3c/0x5c
 el0_svc+0x34/0x70
 el0t_64_sync_handler+0x118/0x124
 el0t_64_sync+0x168/0x16c

The buggy address belongs to stack of task wq-aff.t/1391
 and is located at offset 48 in frame:
 io_sq_offload_create+0x0/0xaa4

This frame has 1 object:
 [32, 40) 'allowed_mask'

The buggy address belongs to the virtual mapping at
 [ffff800089bc0000, ffff800089bc9000) created by:
 kernel_clone+0x124/0x7e0

The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0000d740af80 pfn:0x11740a
memcg:ffff0000c2706f02
flags: 0xbffe00000000000(node=0|zone=2|lastcpupid=0x1fff)
raw: 0bffe00000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff0000d740af80 0000000000000000 00000001ffffffff ffff0000c2706f02
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff800089bc7a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff800089bc7b00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>ffff800089bc7b80: 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
                         ^
 ffff800089bc7c00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
 ffff800089bc7c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409161632.cbeeca0d-lkp@intel.com
Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Tested-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -8576,6 +8576,8 @@ static int io_sq_offload_create(struct i
 			int cpu = p->sq_thread_cpu;
 
 			ret = -EINVAL;
+			if (cpu >= nr_cpu_ids || !cpu_online(cpu))
+				goto err_sqpoll;
 			cpuset_cpus_allowed(current, &allowed_mask);
 			if (!cpumask_test_cpu(cpu, &allowed_mask))
 				goto err_sqpoll;

[PATCH 5.10 14/52] io_uring/sqpoll: do not put cpumask on stack

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Moessbauer <felix.moessbauer@siemens.com>

commit 7f44beadcc11adb98220556d2ddbe9c97aa6d42d upstream.

Putting the cpumask on the stack is deprecated for a long time (since
2d3854a37e8), as these can be big. Given that, change the on-stack
allocation of allowed_mask to be dynamically allocated.

Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240916111150.1266191-1-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -8572,15 +8572,22 @@ static int io_sq_offload_create(struct i
 			return 0;
 
 		if (p->flags & IORING_SETUP_SQ_AFF) {
-			struct cpumask allowed_mask;
+			cpumask_var_t allowed_mask;
 			int cpu = p->sq_thread_cpu;
 
 			ret = -EINVAL;
 			if (cpu >= nr_cpu_ids || !cpu_online(cpu))
 				goto err_sqpoll;
-			cpuset_cpus_allowed(current, &allowed_mask);
-			if (!cpumask_test_cpu(cpu, &allowed_mask))
+			ret = -ENOMEM;
+			if (!alloc_cpumask_var(&allowed_mask, GFP_KERNEL))
 				goto err_sqpoll;
+			ret = -EINVAL;
+			cpuset_cpus_allowed(current, allowed_mask);
+			if (!cpumask_test_cpu(cpu, allowed_mask)) {
+				free_cpumask_var(allowed_mask);
+				goto err_sqpoll;
+			}
+			free_cpumask_var(allowed_mask);
 			sqd->sq_cpu = cpu;
 		} else {
 			sqd->sq_cpu = -1;

[PATCH 5.10 15/52] s390/sclp_vt220: Convert newlines to CRLF instead of LFCR

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Weißschuh <thomas.weissschuh@linutronix.de>

commit dee3df68ab4b00fff6bdf9fc39541729af37307c upstream.

According to the VT220 specification the possible character combinations
sent on RETURN are only CR or CRLF [0].

	The Return key sends either a CR character (0/13) or a CR
	character (0/13) and an LF character (0/10), depending on the
	set/reset state of line feed/new line mode (LNM).

The sclp/vt220 driver however uses LFCR. This can confuse tools, for
example the kunit runner.

Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/char/sclp_vt220.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -325,7 +325,7 @@ sclp_vt220_add_msg(struct sclp_vt220_req
 	buffer = (void *) ((addr_t) sccb + sccb->header.length);
 
 	if (convertlf) {
-		/* Perform Linefeed conversion (0x0a -> 0x0a 0x0d)*/
+		/* Perform Linefeed conversion (0x0a -> 0x0d 0x0a)*/
 		for (from=0, to=0;
 		     (from < count) && (to < sclp_vt220_space_left(request));
 		     from++) {
@@ -334,8 +334,8 @@ sclp_vt220_add_msg(struct sclp_vt220_req
 			/* Perform conversion */
 			if (c == 0x0a) {
 				if (to + 1 < sclp_vt220_space_left(request)) {
-					((unsigned char *) buffer)[to++] = c;
 					((unsigned char *) buffer)[to++] = 0x0d;
+					((unsigned char *) buffer)[to++] = c;
 				} else
 					break;
 

[PATCH 5.10 16/52] KVM: s390: Change virtual to physical address access in diag 0x258 handler

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Mueller <mimu@linux.ibm.com>

commit cad4b3d4ab1f062708fff33f44d246853f51e966 upstream.

The parameters for the diag 0x258 are real addresses, not virtual, but
KVM was using them as virtual addresses. This only happened to work, since
the Linux kernel as a guest used to have a 1:1 mapping for physical vs
virtual addresses.

Fix KVM so that it correctly uses the addresses as real addresses.

Cc: stable@vger.kernel.org
Fixes: 8ae04b8f500b ("KVM: s390: Guest's memory access functions get access registers")
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240917151904.74314-3-nrb@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/kvm/diag.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -77,7 +77,7 @@ static int __diag_page_ref_service(struc
 	vcpu->stat.diagnose_258++;
 	if (vcpu->run->s.regs.gprs[rx] & 7)
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
-	rc = read_guest(vcpu, vcpu->run->s.regs.gprs[rx], rx, &parm, sizeof(parm));
+	rc = read_guest_real(vcpu, vcpu->run->s.regs.gprs[rx], &parm, sizeof(parm));
 	if (rc)
 		return kvm_s390_inject_prog_cond(vcpu, rc);
 	if (parm.parm_version != 2 || parm.parm_len < 5 || parm.code != 0x258)

[PATCH 5.10 17/52] x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Mattson <jmattson@google.com>

commit ff898623af2ed564300752bba83a680a1e4fec8d upstream.

AMD's initial implementation of IBPB did not clear the return address
predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address
predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30].

Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID,
when determining cross-vendor capabilities.

Suggested-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/cpufeatures.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -217,7 +217,7 @@
 #define X86_FEATURE_SPEC_STORE_BYPASS_DISABLE	( 7*32+23) /* "" Disable Speculative Store Bypass. */
 #define X86_FEATURE_LS_CFG_SSBD		( 7*32+24)  /* "" AMD SSBD implementation via LS_CFG MSR */
 #define X86_FEATURE_IBRS		( 7*32+25) /* Indirect Branch Restricted Speculation */
-#define X86_FEATURE_IBPB		( 7*32+26) /* Indirect Branch Prediction Barrier */
+#define X86_FEATURE_IBPB		( 7*32+26) /* "ibpb" Indirect Branch Prediction Barrier without a guaranteed RSB flush */
 #define X86_FEATURE_STIBP		( 7*32+27) /* Single Thread Indirect Branch Predictors */
 #define X86_FEATURE_ZEN			( 7*32+28) /* "" CPU is AMD family 0x17 or above (Zen) */
 #define X86_FEATURE_L1TF_PTEINV		( 7*32+29) /* "" L1TF workaround PTE inversion */
@@ -324,6 +324,7 @@
 #define X86_FEATURE_VIRT_SSBD		(13*32+25) /* Virtualized Speculative Store Bypass Disable */
 #define X86_FEATURE_AMD_SSB_NO		(13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */
 #define X86_FEATURE_BTC_NO		(13*32+29) /* "" Not vulnerable to Branch Type Confusion */
+#define X86_FEATURE_AMD_IBPB_RET	(13*32+30) /* "" IBPB clears return address predictor */
 
 /* Thermal and Power Management Leaf, CPUID level 0x00000006 (EAX), word 14 */
 #define X86_FEATURE_DTHERM		(14*32+ 0) /* Digital Thermal Sensor */

[PATCH 5.10 18/52] x86/cpufeatures: Add a IBPB_NO_RET BUG flag

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Wikner <kwikner@ethz.ch>

commit 3ea87dfa31a7b0bb0ff1675e67b9e54883013074 upstream.

Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.

  [ bp: Massage. ]

Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/cpufeatures.h |    2 ++
 arch/x86/kernel/cpu/common.c       |    3 +++
 2 files changed, 5 insertions(+)

--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -456,4 +456,6 @@
 #define X86_BUG_SRSO			X86_BUG(1*32 + 0) /* AMD SRSO bug */
 #define X86_BUG_DIV0			X86_BUG(1*32 + 1) /* AMD DIV0 speculation bug */
 #define X86_BUG_RFDS			X86_BUG(1*32 + 2) /* CPU is vulnerable to Register File Data Sampling */
+#define X86_BUG_BHI			X86_BUG(1*32 + 3) /* CPU is affected by Branch History Injection */
+#define X86_BUG_IBPB_NO_RET		X86_BUG(1*32 + 4) /* "ibpb_no_ret" IBPB omits return target predictions */
 #endif /* _ASM_X86_CPUFEATURES_H */
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1335,6 +1335,9 @@ static void __init cpu_set_bug_bits(stru
 	if (vulnerable_to_rfds(ia32_cap))
 		setup_force_cpu_bug(X86_BUG_RFDS);
 
+	if (cpu_has(c, X86_FEATURE_AMD_IBPB) && !cpu_has(c, X86_FEATURE_AMD_IBPB_RET))
+		setup_force_cpu_bug(X86_BUG_IBPB_NO_RET);
+
 	if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
 		return;
 

[PATCH 5.10 19/52] x86/entry: Have entry_ibpb() invalidate return predictions

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Wikner <kwikner@ethz.ch>

commit 50e4b3b94090babe8d4bb85c95f0d3e6b07ea86e upstream.

entry_ibpb() should invalidate all indirect predictions, including return
target predictions. Not all IBPB implementations do this, in which case the
fallback is RSB filling.

Prevent SRSO-style hijacks of return predictions following IBPB, as the return
target predictor can be corrupted before the IBPB completes.

  [ bp: Massage. ]

Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/entry.S |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/x86/entry/entry.S
+++ b/arch/x86/entry/entry.S
@@ -9,6 +9,8 @@
 #include <asm/unwind_hints.h>
 #include <asm/segment.h>
 #include <asm/cache.h>
+#include <asm/cpufeatures.h>
+#include <asm/nospec-branch.h>
 
 .pushsection .noinstr.text, "ax"
 
@@ -17,6 +19,9 @@ SYM_FUNC_START(entry_ibpb)
 	movl	$PRED_CMD_IBPB, %eax
 	xorl	%edx, %edx
 	wrmsr
+
+	/* Make sure IBPB clears return stack preductions too. */
+	FILL_RETURN_BUFFER %rax, RSB_CLEAR_LOOPS, X86_BUG_IBPB_NO_RET
 	RET
 SYM_FUNC_END(entry_ibpb)
 /* For KVM */

[PATCH 5.10 20/52] x86/bugs: Skip RSB fill at VMEXIT

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Wikner <kwikner@ethz.ch>

commit 0fad2878642ec46225af2054564932745ac5c765 upstream.

entry_ibpb() is designed to follow Intel's IBPB specification regardless
of CPU. This includes invalidating RSB entries.

Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the
RET untraining in the VMEXIT path will take care of all BTB and RSB
clearing so there's no need to explicitly fill the RSB anymore.

  [ bp: Massage commit message. ]

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/bugs.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -1062,6 +1062,14 @@ do_cmd_auto:
 	case RETBLEED_MITIGATION_IBPB:
 		setup_force_cpu_cap(X86_FEATURE_ENTRY_IBPB);
 		mitigate_smt = true;
+
+		/*
+		 * There is no need for RSB filling: entry_ibpb() ensures
+		 * all predictions, including the RSB, are invalidated,
+		 * regardless of IBPB implementation.
+		 */
+		setup_clear_cpu_cap(X86_FEATURE_RSB_VMEXIT);
+
 		break;
 
 	default:
@@ -2465,6 +2473,13 @@ static void __init srso_select_mitigatio
 			if (!boot_cpu_has(X86_FEATURE_ENTRY_IBPB) && has_microcode) {
 				setup_force_cpu_cap(X86_FEATURE_IBPB_ON_VMEXIT);
 				srso_mitigation = SRSO_MITIGATION_IBPB_ON_VMEXIT;
+
+				/*
+				 * There is no need for RSB filling: entry_ibpb() ensures
+				 * all predictions, including the RSB, are invalidated,
+				 * regardless of IBPB implementation.
+				 */
+				setup_clear_cpu_cap(X86_FEATURE_RSB_VMEXIT);
 			}
 		} else {
 			pr_err("WARNING: kernel not compiled with CPU_SRSO.\n");

[PATCH 5.10 21/52] x86/bugs: Do not use UNTRAIN_RET with IBPB on entry

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Wikner <kwikner@ethz.ch>

commit c62fa117c32bd1abed9304c58e0da6940f8c7fc2 upstream.

Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions
with IBPB, no software-based untraining of returns is needed anymore.
Currently, this change affects retbleed and SRSO mitigations so if
either of the mitigations is doing IBPB and the other one does the
software sequence, the latter is not needed anymore.

  [ bp: Massage commit message. ]

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Cc: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/bugs.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -1061,6 +1061,15 @@ do_cmd_auto:
 
 	case RETBLEED_MITIGATION_IBPB:
 		setup_force_cpu_cap(X86_FEATURE_ENTRY_IBPB);
+
+		/*
+		 * IBPB on entry already obviates the need for
+		 * software-based untraining so clear those in case some
+		 * other mitigation like SRSO has selected them.
+		 */
+		setup_clear_cpu_cap(X86_FEATURE_UNRET);
+		setup_clear_cpu_cap(X86_FEATURE_RETHUNK);
+
 		mitigate_smt = true;
 
 		/*
@@ -2461,6 +2470,14 @@ static void __init srso_select_mitigatio
 			if (has_microcode) {
 				setup_force_cpu_cap(X86_FEATURE_ENTRY_IBPB);
 				srso_mitigation = SRSO_MITIGATION_IBPB;
+
+				/*
+				 * IBPB on entry already obviates the need for
+				 * software-based untraining so clear those in case some
+				 * other mitigation like Retbleed has selected them.
+				 */
+				setup_clear_cpu_cap(X86_FEATURE_UNRET);
+				setup_clear_cpu_cap(X86_FEATURE_RETHUNK);
 			}
 		} else {
 			pr_err("WARNING: kernel not compiled with CPU_IBPB_ENTRY.\n");

[PATCH 5.10 22/52] blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Omar Sandoval <osandov@fb.com>

commit e972b08b91ef48488bae9789f03cfedb148667fb upstream.

We're seeing crashes from rq_qos_wake_function that look like this:

  BUG: unable to handle page fault for address: ffffafe180a40084
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
  Oops: Oops: 0002 [#1] PREEMPT SMP PTI
  CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
  RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
  Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
  RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
  RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
  RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
  R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
  R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
  FS:  0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   <IRQ>
   try_to_wake_up+0x5a/0x6a0
   rq_qos_wake_function+0x71/0x80
   __wake_up_common+0x75/0xa0
   __wake_up+0x36/0x60
   scale_up.part.0+0x50/0x110
   wb_timer_fn+0x227/0x450
   ...

So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).

p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.

What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:

rq_qos_wait()                           rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
                                        data->got_token = true;
                                        list_del_init(&curr->entry);
if (data.got_token)
        break;
finish_wait(&rqw->wait, &data.wq);
  ^- returns immediately because
     list_empty_careful(&wq_entry->entry)
     is true
... return, go do something else ...
                                        wake_up_process(data->task)
                                          (NO LONGER VALID!)-^

Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.

The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.

Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().

Fixes: 38cfb5a45ee0 ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/blk-rq-qos.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/blk-rq-qos.c
+++ b/block/blk-rq-qos.c
@@ -225,8 +225,8 @@ static int rq_qos_wake_function(struct w
 
 	data->got_token = true;
 	smp_wmb();
-	list_del_init(&curr->entry);
 	wake_up_process(data->task);
+	list_del_init_careful(&curr->entry);
 	return 1;
 }
 

[PATCH 5.10 23/52] io_uring/sqpoll: close race on waiting for sqring entries

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

commit 28aabffae6be54284869a91cd8bccd3720041129 upstream.

When an application uses SQPOLL, it must wait for the SQPOLL thread to
consume SQE entries, if it fails to get an sqe when calling
io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the
flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done
with io_uring_sqring_wait(). There's a natural expectation that once
this call returns, a new SQE entry can be retrieved, filled out, and
submitted. However, the kernel uses the cached sq head to determine if
the SQRING is full or not. If the SQPOLL thread is currently in the
process of submitting SQE entries, it may have updated the cached sq
head, but not yet committed it to the SQ ring. Hence the kernel may find
that there are SQE entries ready to be consumed, and return successfully
to the application. If the SQPOLL thread hasn't yet committed the SQ
ring entries by the time the application returns to userspace and
attempts to get a new SQE, it will fail getting a new SQE.

Fix this by having io_sqring_full() always use the user visible SQ ring
head entry, rather than the internally cached one.

Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/1267
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -1580,7 +1580,14 @@ static inline bool io_sqring_full(struct
 {
 	struct io_rings *r = ctx->rings;
 
-	return READ_ONCE(r->sq.tail) - ctx->cached_sq_head == ctx->sq_entries;
+	/*
+	 * SQPOLL must use the actual sqring head, as using the cached_sq_head
+	 * is race prone if the SQPOLL thread has grabbed entries but not yet
+	 * committed them to the ring. For !SQPOLL, this doesn't matter, but
+	 * since this helper is just used for SQPOLL sqring waits (or POLLOUT),
+	 * just read the actual sqring head unconditionally.
+	 */
+	return READ_ONCE(r->sq.tail) - READ_ONCE(r->sq.head) == ctx->sq_entries;
 }
 
 static inline unsigned int __io_cqring_events(struct io_ring_ctx *ctx)

[PATCH 5.10 24/52] drm/radeon: Fix encoder->possible_clones

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 28127dba64d8ae1a0b737b973d6d029908599611 upstream.

Include the encoder itself in its possible_clones bitmask.
In the past nothing validated that drivers were populating
possible_clones correctly, but that changed in commit
74d2aacbe840 ("drm: Validate encoder->possible_clones").
Looks like radeon never got the memo and is still not
following the rules 100% correctly.

This results in some warnings during driver initialization:
Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7)
WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c
...

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: 74d2aacbe840 ("drm: Validate encoder->possible_clones")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/radeon/radeon_encoders.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -47,7 +47,7 @@ static uint32_t radeon_encoder_clones(st
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct drm_encoder *clone_encoder;
-	uint32_t index_mask = 0;
+	uint32_t index_mask = drm_encoder_mask(encoder);
 	int count;
 
 	/* DIG routing gets problematic */

[PATCH 5.10 25/52] drm/vmwgfx: Handle surface check failure correctly

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Kuratov <kniv@yandex-team.ru>

commit 26498b8d54373d31a621d7dec95c4bd842563b3b upstream.

Currently if condition (!bo and !vmw_kms_srf_ok()) was met
we go to err_out with ret == 0.
err_out dereferences vfb if ret == 0, but in our case vfb is still NULL.

Fix this by assigning sensible error to ret.

Found by Linux Verification Center (linuxtesting.org) with SVACE

Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru>
Cc: stable@vger.kernel.org
Fixes: 810b3e1683d0 ("drm/vmwgfx: Support topology greater than texture size")
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002122429.1981822-1-kniv@yandex-team.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -1402,6 +1402,7 @@ static struct drm_framebuffer *vmw_kms_f
 		DRM_ERROR("Surface size cannot exceed %dx%d",
 			dev_priv->texture_max_width,
 			dev_priv->texture_max_height);
+		ret = -EINVAL;
 		goto err_out;
 	}
 

[PATCH 5.10 26/52] iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit bcdab6f74c91cda19714354fd4e9e3ef3c9a78b3 upstream.

This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.

Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-6-4019453f8c33@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/dac/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -191,6 +191,7 @@ config AD5764
 config AD5770R
 	tristate "Analog Devices AD5770R IDAC driver"
 	depends on SPI_MASTER
+	select REGMAP_SPI
 	help
 	  Say yes here to build support for Analog Devices AD5770R Digital to
 	  Analog Converter.

[PATCH 5.10 27/52] iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit 252ff06a4cb4e572cb3c7fcfa697db96b08a7781 upstream.

This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.

Fixes: 8316cebd1e59 ("iio: dac: add support for ltc1660")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-7-4019453f8c33@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/dac/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -272,6 +272,7 @@ config LPC18XX_DAC
 config LTC1660
 	tristate "Linear Technology LTC1660/LTC1665 DAC SPI driver"
 	depends on SPI
+	select REGMAP_SPI
 	help
 	  Say yes here to build support for Linear Technology
 	  LTC1660 and LTC1665 Digital to Analog Converters.

[PATCH 5.10 28/52] iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit 27b6aa68a68105086aef9f0cb541cd688e5edea8 upstream.

This driver makes use of regmap_mmio, but does not select the required
module.
Add the missing 'select REGMAP_MMIO'.

Fixes: 4d4b30526eb8 ("iio: dac: add support for stm32 DAC")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-8-4019453f8c33@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/dac/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -359,6 +359,7 @@ config STM32_DAC
 
 config STM32_DAC_CORE
 	tristate
+	select REGMAP_MMIO
 
 config TI_DAC082S085
 	tristate "Texas Instruments 8/10/12-bit 2/4-channel DAC driver"

[PATCH 5.10 29/52] iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit 4c4834fd8696a949d1b1f1c2c5b96e1ad2083b02 upstream.

This driver makes use of triggered buffers, but does not select the
required modules.

Fixes: 2a86487786b5 ("iio: adc: ti-ads8688: add trigger and buffer support")
Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-4-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1126,6 +1126,8 @@ config TI_ADS8344
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  If you say yes here you get support for Texas Instruments ADS8684 and
 	  and ADS8688 ADC chips

[PATCH 5.10 30/52] iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 3a29b84cf7fbf912a6ab1b9c886746f02b74ea25 upstream.

If hid_sensor_set_report_latency() fails, the error code should be returned
instead of a value likely to be interpreted as 'success'.

Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/common/hid-sensors/hid-sensor-trigger.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -35,7 +35,7 @@ static ssize_t _hid_sensor_set_report_la
 	latency = integer * 1000 + fract / 1000;
 	ret = hid_sensor_set_report_latency(attrb, latency);
 	if (ret < 0)
-		return len;
+		return ret;
 
 	attrb->latency_ms = hid_sensor_get_report_latency(attrb);
 

[PATCH 5.10 31/52] iio: light: veml6030: fix ALS sensor resolution

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit c9e9746f275c45108f2b0633a4855d65d9ae0736 upstream.

The driver still uses the sensor resolution provided in the datasheet
until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7,
28-Nov-2023. The original ambient light resolution has been updated from
0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in
the current device datasheet.

Update the default resolution for IT = 100 ms and GAIN = 1/8 from the
original 4608 mlux/cnt to the current value from the "Resolution and
maximum detection range" table (Application Note 84367, page 5), 5376
mlux/cnt.

Cc: <stable@vger.kernel.org>
Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/veml6030.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/light/veml6030.c
+++ b/drivers/iio/light/veml6030.c
@@ -780,7 +780,7 @@ static int veml6030_hw_init(struct iio_d
 
 	/* Cache currently active measurement parameters */
 	data->cur_gain = 3;
-	data->cur_resolution = 4608;
+	data->cur_resolution = 5376;
 	data->cur_integration_time = 3;
 
 	return ret;

[PATCH 5.10 32/52] iio: light: veml6030: fix IIO device retrieval from embedded device

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit c7c44e57750c31de43906d97813273fdffcf7d02 upstream.

The dev pointer that is received as an argument in the
in_illuminance_period_available_show function references the device
embedded in the IIO device, not in the i2c client.

dev_to_iio_dev() must be used to accessthe right data. The current
implementation leads to a segmentation fault on every attempt to read
the attribute because indio_dev gets a NULL assignment.

This bug has been present since the first appearance of the driver,
apparently since the last version (V6) before getting applied. A
constant attribute was used until then, and the last modifications might
have not been tested again.

Cc: stable@vger.kernel.org
Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/veml6030.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/iio/light/veml6030.c
+++ b/drivers/iio/light/veml6030.c
@@ -99,9 +99,8 @@ static const char * const period_values[
 static ssize_t in_illuminance_period_available_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
+	struct veml6030_data *data = iio_priv(dev_to_iio_dev(dev));
 	int ret, reg, x;
-	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
-	struct veml6030_data *data = iio_priv(indio_dev);
 
 	ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, &reg);
 	if (ret) {

[PATCH 5.10 33/52] iio: light: opt3001: add missing full-scale range value

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emil Gedenryd <emil.gedenryd@axis.com>

commit 530688e39c644543b71bdd9cb45fdfb458a28eaa upstream.

The opt3001 driver uses predetermined full-scale range values to
determine what exponent to use for event trigger threshold values.
The problem is that one of the values specified in the datasheet is
missing from the implementation. This causes larger values to be
scaled down to an incorrect exponent, effectively reducing the
maximum settable threshold value by a factor of 2.

Add missing full-scale range array value.

Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor")
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/light/opt3001.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -139,6 +139,10 @@ static const struct opt3001_scale opt300
 		.val2 = 400000,
 	},
 	{
+		.val = 41932,
+		.val2 = 800000,
+	},
+	{
 		.val = 83865,
 		.val2 = 600000,
 	},

[PATCH 5.10 34/52] iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit 75461a0b15d7c026924d0001abce0476bbc7eda8 upstream.

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-13-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/proximity/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -49,6 +49,8 @@ config LIDAR_LITE_V2
 config MB1232
 	tristate "MaxSonar I2CXL family ultrasonic sensors"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y to build a driver for the ultrasonic sensors I2CXL of
 	  MaxBotix which have an i2c interface. It can be used to measure

[PATCH 5.10 35/52] iio: adc: ti-ads124s08: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Carrasco <javier.carrasco.cruz@gmail.com>

commit eb143d05def52bc6d193e813018e5fa1a0e47c77 upstream.

This driver makes use of triggered buffers, but does not select the
required modules.

Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'.

Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241003-iio-select-v1-3-67c0385197cd@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/adc/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1138,6 +1138,8 @@ config TI_ADS8688
 config TI_ADS124S08
 	tristate "Texas Instruments ADS124S08"
 	depends on SPI && OF
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  If you say yes here you get support for Texas Instruments ADS124S08
 	  and ADS124S06 ADC chips

[PATCH 5.10 36/52] Bluetooth: Remove debugfs directory on module init failure

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Thompson <dev@aaront.org>

commit 1db4564f101b47188c1b71696bd342ef09172b22 upstream.

If bt_init() fails, the debugfs directory currently is not removed. If
the module is loaded again after that, the debugfs directory is not set
up properly due to the existing directory.

  # modprobe bluetooth
  # ls -laF /sys/kernel/debug/bluetooth
  total 0
  drwxr-xr-x  2 root root 0 Sep 27 14:26 ./
  drwx------ 31 root root 0 Sep 27 14:25 ../
  -r--r--r--  1 root root 0 Sep 27 14:26 l2cap
  -r--r--r--  1 root root 0 Sep 27 14:26 sco
  # modprobe -r bluetooth
  # ls -laF /sys/kernel/debug/bluetooth
  ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory
  #

  # modprobe bluetooth
  modprobe: ERROR: could not insert 'bluetooth': Invalid argument
  # dmesg | tail -n 6
  Bluetooth: Core ver 2.22
  NET: Registered PF_BLUETOOTH protocol family
  Bluetooth: HCI device and connection manager initialized
  Bluetooth: HCI socket layer initialized
  Bluetooth: Faking l2cap_init() failure for testing
  NET: Unregistered PF_BLUETOOTH protocol family
  # ls -laF /sys/kernel/debug/bluetooth
  total 0
  drwxr-xr-x  2 root root 0 Sep 27 14:31 ./
  drwx------ 31 root root 0 Sep 27 14:26 ../
  #

  # modprobe bluetooth
  # dmesg | tail -n 7
  Bluetooth: Core ver 2.22
  debugfs: Directory 'bluetooth' with parent '/' already present!
  NET: Registered PF_BLUETOOTH protocol family
  Bluetooth: HCI device and connection manager initialized
  Bluetooth: HCI socket layer initialized
  Bluetooth: L2CAP socket layer initialized
  Bluetooth: SCO socket layer initialized
  # ls -laF /sys/kernel/debug/bluetooth
  total 0
  drwxr-xr-x  2 root root 0 Sep 27 14:31 ./
  drwx------ 31 root root 0 Sep 27 14:26 ../
  #

Cc: stable@vger.kernel.org
Fixes: ffcecac6a738 ("Bluetooth: Create root debugfs directory during module init")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/af_bluetooth.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -779,6 +779,7 @@ cleanup_sysfs:
 	bt_sysfs_cleanup();
 cleanup_led:
 	bt_leds_cleanup();
+	debugfs_remove_recursive(bt_debugfs);
 	return err;
 }
 

[PATCH 5.10 37/52] Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream.

Fake CSR controllers don't seem to handle short-transfer properly which
cause command to time out:

kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd
kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
kernel: usb 1-1: Product: BT DONGLE10
...
Bluetooth: hci1: Opcode 0x1004 failed: -110
kernel: Bluetooth: hci1: command 0x1004 tx timeout

According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size
Constraints a interrupt transfer is considered complete when the size is 0
(ZPL) or < wMaxPacketSize:

 'When an interrupt transfer involves more data than can fit in one
 data payload of the currently established maximum size, all data
 payloads are required to be maximum-sized except for the last data
 payload, which will contain the remaining data. An interrupt transfer
 is complete when the endpoint does one of the following:

 • Has transferred exactly the amount of data expected
 • Transfers a packet with a payload size less than wMaxPacketSize or
 transfers a zero-length packet'

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365
Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btusb.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -928,10 +928,15 @@ static int btusb_submit_intr_urb(struct
 	if (!urb)
 		return -ENOMEM;
 
-	/* Use maximum HCI Event size so the USB stack handles
-	 * ZPL/short-transfer automatically.
-	 */
-	size = HCI_MAX_EVENT_SIZE;
+	if (le16_to_cpu(data->udev->descriptor.idVendor)  == 0x0a12 &&
+	    le16_to_cpu(data->udev->descriptor.idProduct) == 0x0001)
+		/* Fake CSR devices don't seem to support sort-transter */
+		size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
+	else
+		/* Use maximum HCI Event size so the USB stack handles
+		 * ZPL/short-transfer automatically.
+		 */
+		size = HCI_MAX_EVENT_SIZE;
 
 	buf = kmalloc(size, mem_flags);
 	if (!buf) {

[PATCH 5.10 38/52] xhci: Fix incorrect stream context type macro

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 6599b6a6fa8060145046d0744456b6abdb3122a7 upstream.

The stream contex type (SCT) bitfield is used both in the stream context
data structure,  and in the 'Set TR Dequeue pointer' command TRB.
In both cases it uses bits 3:1

The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field
for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value
1 bit left before masking the three bits.

Fix this by first masking and rshifting, just like the similar
SCT_FOR_CTX(p) macro does

This issue has not been visibile as the lost bit 3 is only used with
secondary stream arrays (SSA). Xhci driver currently only supports using
a primary stream array with Linear stream addressing.

Fixes: 95241dbdf828 ("xhci: Set SCT field for Set TR dequeue on streams")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1282,7 +1282,7 @@ enum xhci_setup_dev {
 /* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */
 #define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
 #define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
-#define SCT_FOR_TRB(p)			(((p) << 1) & 0x7)
+#define SCT_FOR_TRB(p)			(((p) & 0x7) << 1)
 
 /* Link TRB specific fields */
 #define TRB_TC			(1<<1)

[PATCH 5.10 39/52] USB: serial: option: add support for Quectel EG916Q-GL

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin B. Frost <benjamin@geanix.com>

commit 540eff5d7faf0c9330ec762da49df453263f7676 upstream.

Add Quectel EM916Q-GL with product ID 0x6007

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6007 Rev= 2.00
S:  Manufacturer=Quectel
S:  Product=EG916Q-GL
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA
A:  FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=88(I) Atr=03(Int.) MxPS=  32 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MI_00 Quectel USB Diag Port
MI_01 Quectel USB NMEA Port
MI_02 Quectel USB AT Port
MI_03 Quectel USB Modem Port
MI_04 Quectel USB Net Port

Signed-off-by: Benjamin B. Frost <benjamin@geanix.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -279,6 +279,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EG912Y			0x6001
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200A			0x6005
+#define QUECTEL_PRODUCT_EG916Q			0x6007
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
 #define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
@@ -1270,6 +1271,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG916Q, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },

[PATCH 5.10 40/52] USB: serial: option: add Telit FN920C04 MBIM compositions

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <dnlplm@gmail.com>

commit 6d951576ee16430822a8dee1e5c54d160e1de87d upstream.

Add the following Telit FN920C04 compositions:

0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a2 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a7 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10aa Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1382,10 +1382,16 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff),	/* Telit FN20C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a2, 0xff),	/* Telit FN920C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff),	/* Telit FN20C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a7, 0xff),	/* Telit FN920C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff),	/* Telit FN20C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff),	/* Telit FN920C04 (MBIM) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 5.10 41/52] parport: Proper fix for array out-of-bounds access

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 02ac3a9ef3a18b58d8f3ea2b6e46de657bf6c4f9 upstream.

The recent fix for array out-of-bounds accesses replaced sprintf()
calls blindly with snprintf().  However, since snprintf() returns the
would-be-printed size, not the actually output size, the length
calculation can still go over the given limit.

Use scnprintf() instead of snprintf(), which returns the actually
output letters, for addressing the potential out-of-bounds access
properly.

Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parport/procfs.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -51,12 +51,12 @@ static int do_active_device(struct ctl_t
 	
 	for (dev = port->devices; dev ; dev = dev->next) {
 		if(dev == port->cad) {
-			len += snprintf(buffer, sizeof(buffer), "%s\n", dev->name);
+			len += scnprintf(buffer, sizeof(buffer), "%s\n", dev->name);
 		}
 	}
 
 	if(!len) {
-		len += snprintf(buffer, sizeof(buffer), "%s\n", "none");
+		len += scnprintf(buffer, sizeof(buffer), "%s\n", "none");
 	}
 
 	if (len > *lenp)
@@ -87,19 +87,19 @@ static int do_autoprobe(struct ctl_table
 	}
 	
 	if ((str = info->class_name) != NULL)
-		len += snprintf (buffer + len, sizeof(buffer) - len, "CLASS:%s;\n", str);
+		len += scnprintf (buffer + len, sizeof(buffer) - len, "CLASS:%s;\n", str);
 
 	if ((str = info->model) != NULL)
-		len += snprintf (buffer + len, sizeof(buffer) - len, "MODEL:%s;\n", str);
+		len += scnprintf (buffer + len, sizeof(buffer) - len, "MODEL:%s;\n", str);
 
 	if ((str = info->mfr) != NULL)
-		len += snprintf (buffer + len, sizeof(buffer) - len, "MANUFACTURER:%s;\n", str);
+		len += scnprintf (buffer + len, sizeof(buffer) - len, "MANUFACTURER:%s;\n", str);
 
 	if ((str = info->description) != NULL)
-		len += snprintf (buffer + len, sizeof(buffer) - len, "DESCRIPTION:%s;\n", str);
+		len += scnprintf (buffer + len, sizeof(buffer) - len, "DESCRIPTION:%s;\n", str);
 
 	if ((str = info->cmdset) != NULL)
-		len += snprintf (buffer + len, sizeof(buffer) - len, "COMMAND SET:%s;\n", str);
+		len += scnprintf (buffer + len, sizeof(buffer) - len, "COMMAND SET:%s;\n", str);
 
 	if (len > *lenp)
 		len = *lenp;
@@ -128,7 +128,7 @@ static int do_hardware_base_addr(struct
 	if (write) /* permissions prevent this anyway */
 		return -EACCES;
 
-	len += snprintf (buffer, sizeof(buffer), "%lu\t%lu\n", port->base, port->base_hi);
+	len += scnprintf (buffer, sizeof(buffer), "%lu\t%lu\n", port->base, port->base_hi);
 
 	if (len > *lenp)
 		len = *lenp;
@@ -155,7 +155,7 @@ static int do_hardware_irq(struct ctl_ta
 	if (write) /* permissions prevent this anyway */
 		return -EACCES;
 
-	len += snprintf (buffer, sizeof(buffer), "%d\n", port->irq);
+	len += scnprintf (buffer, sizeof(buffer), "%d\n", port->irq);
 
 	if (len > *lenp)
 		len = *lenp;
@@ -182,7 +182,7 @@ static int do_hardware_dma(struct ctl_ta
 	if (write) /* permissions prevent this anyway */
 		return -EACCES;
 
-	len += snprintf (buffer, sizeof(buffer), "%d\n", port->dma);
+	len += scnprintf (buffer, sizeof(buffer), "%d\n", port->dma);
 
 	if (len > *lenp)
 		len = *lenp;
@@ -213,7 +213,7 @@ static int do_hardware_modes(struct ctl_
 #define printmode(x)							\
 do {									\
 	if (port->modes & PARPORT_MODE_##x)				\
-		len += snprintf(buffer + len, sizeof(buffer) - len, "%s%s", f++ ? "," : "", #x); \
+		len += scnprintf(buffer + len, sizeof(buffer) - len, "%s%s", f++ ? "," : "", #x); \
 } while (0)
 		int f = 0;
 		printmode(PCSPP);

[PATCH 5.10 42/52] x86/resctrl: Annotate get_mem_config() functions as __init

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nathan Chancellor <nathan@kernel.org>

commit d5fd042bf4cfb557981d65628e1779a492cd8cfa upstream.

After a recent LLVM change [1] that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning from
__get_mem_config_intel(), which got moved to .text.unlikely. as a result of
that optimization:

  WARNING: modpost: vmlinux: section mismatch in reference: \
  __get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text)

Mark __get_mem_config_intel() as __init as well since it is only called
from __init code, which clears up the warning.

While __rdt_get_mem_config_amd() does not exhibit a warning because it
does not call any __init code, it is a similar function that is only
called from __init code like __get_mem_config_intel(), so mark it __init
as well to keep the code symmetrical.

CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error.

Fixes: 05b93417ce5b ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)")
Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@kernel.org>
Link: https://github.com/llvm/llvm-project/commit/6b11573b8c5e3d36beee099dbe7347c2a007bf53 [1]
Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/resctrl/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -251,7 +251,7 @@ static inline bool rdt_get_mb_table(stru
 	return false;
 }
 
-static bool __get_mem_config_intel(struct rdt_resource *r)
+static __init bool __get_mem_config_intel(struct rdt_resource *r)
 {
 	union cpuid_0x10_3_eax eax;
 	union cpuid_0x10_x_edx edx;
@@ -285,7 +285,7 @@ static bool __get_mem_config_intel(struc
 	return true;
 }
 
-static bool __rdt_get_mem_config_amd(struct rdt_resource *r)
+static __init bool __rdt_get_mem_config_amd(struct rdt_resource *r)
 {
 	union cpuid_0x10_3_eax eax;
 	union cpuid_0x10_x_edx edx;

[PATCH 5.10 43/52] x86/apic: Always explicitly disarm TSC-deadline timer

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Rui <rui.zhang@intel.com>

commit ffd95846c6ec6cf1f93da411ea10d504036cab42 upstream.

New processors have become pickier about the local APIC timer state
before entering low power modes. These low power modes are used (for
example) when you close your laptop lid and suspend. If you put your
laptop in a bag and it is not in this low power mode, it is likely
to get quite toasty while it quickly sucks the battery dry.

The problem boils down to some CPUs' inability to power down until the
CPU recognizes that the local APIC timer is shut down. The current
kernel code works in one-shot and periodic modes but does not work for
deadline mode. Deadline mode has been the supported and preferred mode
on Intel CPUs for over a decade and uses an MSR to drive the timer
instead of an APIC register.

Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to
MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing
to the initial-count register (APIC_TMICT) which is ignored in
TSC-deadline mode.

Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be
enough to tell the hardware that the timer will not fire in any of the
timer modes. But mitigating AMD erratum 411[1] also requires clearing
out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in
practice on Intel Lunar Lake systems, which is the motivation for this
change.

1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf

Fixes: 279f1461432c ("x86: apic: Use tsc deadline for oneshot when available")
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/apic/apic.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -491,7 +491,19 @@ static int lapic_timer_shutdown(struct c
 	v = apic_read(APIC_LVTT);
 	v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
 	apic_write(APIC_LVTT, v);
-	apic_write(APIC_TMICT, 0);
+
+	/*
+	 * Setting APIC_LVT_MASKED (above) should be enough to tell
+	 * the hardware that this timer will never fire. But AMD
+	 * erratum 411 and some Intel CPU behavior circa 2024 say
+	 * otherwise.  Time for belt and suspenders programming: mask
+	 * the timer _and_ zero the counter registers:
+	 */
+	if (v & APIC_LVT_TIMER_TSCDEADLINE)
+		wrmsrl(MSR_IA32_TSC_DEADLINE, 0);
+	else
+		apic_write(APIC_TMICT, 0);
+
 	return 0;
 }
 

[PATCH 5.10 44/52] x86/entry_32: Do not clobber user EFLAGS.ZF

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>

commit 2e2e5143d4868163d6756c8c6a4d28cbfa5245e5 upstream.

Opportunistic SYSEXIT executes VERW to clear CPU buffers after user EFLAGS
are restored. This can clobber user EFLAGS.ZF.

Move CLEAR_CPU_BUFFERS before the user EFLAGS are restored. This ensures
that the user EFLAGS.ZF is not clobbered.

Closes: https://lore.kernel.org/lkml/yVXwe8gvgmPADpRB6lXlicS2fcHoV5OHHxyuFbB_MEleRPD7-KhGe5VtORejtPe-KCkT8Uhcg5d7-IBw4Ojb4H7z5LQxoZylSmJ8KNL3A8o=@protonmail.com/
Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition")
Reported-by: Jari Ruusu <jariruusu@protonmail.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-1-1de0daca2d42%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/entry_32.S |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -939,6 +939,8 @@ SYM_FUNC_START(entry_SYSENTER_32)
 
 	/* Now ready to switch the cr3 */
 	SWITCH_TO_USER_CR3 scratch_reg=%eax
+	/* Clobbers ZF */
+	CLEAR_CPU_BUFFERS
 
 	/*
 	 * Restore all flags except IF. (We restore IF separately because
@@ -949,7 +951,6 @@ SYM_FUNC_START(entry_SYSENTER_32)
 	BUG_IF_WRONG_CR3 no_user_check=1
 	popfl
 	popl	%eax
-	CLEAR_CPU_BUFFERS
 
 	/*
 	 * Return back to the vDSO, which will pop ecx and edx.

[PATCH 5.10 45/52] x86/entry_32: Clear CPU buffers after register restore in NMI return

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>

commit 48a2440d0f20c826b884e04377ccc1e4696c84e9 upstream.

CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.

Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI.

Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-2-1de0daca2d42%40linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/entry/entry_32.S |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1222,7 +1222,6 @@ SYM_CODE_START(asm_exc_nmi)
 
 	/* Not on SYSENTER stack. */
 	call	exc_nmi
-	CLEAR_CPU_BUFFERS
 	jmp	.Lnmi_return
 
 .Lnmi_from_sysenter_stack:
@@ -1243,6 +1242,7 @@ SYM_CODE_START(asm_exc_nmi)
 
 	CHECK_AND_APPLY_ESPFIX
 	RESTORE_ALL_NMI cr3_reg=%edi pop=4
+	CLEAR_CPU_BUFFERS
 	jmp	.Lirq_return
 
 #ifdef CONFIG_X86_ESPFIX32
@@ -1284,6 +1284,7 @@ SYM_CODE_START(asm_exc_nmi)
 	 *  1 - orig_ax
 	 */
 	lss	(1+5+6)*4(%esp), %esp			# back to espfix stack
+	CLEAR_CPU_BUFFERS
 	jmp	.Lirq_return
 #endif
 SYM_CODE_END(asm_exc_nmi)

[PATCH 5.10 46/52] irqchip/gic-v4: Dont allow a VMOVP on a dying VPE

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <maz@kernel.org>

commit 1442ee0011983f0c5c4b92380e6853afb513841a upstream.

Kunkun Jiang reported that there is a small window of opportunity for
userspace to force a change of affinity for a VPE while the VPE has already
been unmapped, but the corresponding doorbell interrupt still visible in
/proc/irq/.

Plug the race by checking the value of vmapp_count, which tracks whether
the VPE is mapped ot not, and returning an error in this case.

This involves making vmapp_count common to both GICv4.1 and its v4.0
ancestor.

Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com
Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/irqchip/irq-gic-v3-its.c   |   18 ++++++++++++------
 include/linux/irqchip/arm-gic-v4.h |    4 +++-
 2 files changed, 15 insertions(+), 7 deletions(-)

--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -789,8 +789,8 @@ static struct its_vpe *its_build_vmapp_c
 	its_encode_valid(cmd, desc->its_vmapp_cmd.valid);
 
 	if (!desc->its_vmapp_cmd.valid) {
+		alloc = !atomic_dec_return(&desc->its_vmapp_cmd.vpe->vmapp_count);
 		if (is_v4_1(its)) {
-			alloc = !atomic_dec_return(&desc->its_vmapp_cmd.vpe->vmapp_count);
 			its_encode_alloc(cmd, alloc);
 			/*
 			 * Unmapping a VPE is self-synchronizing on GICv4.1,
@@ -809,13 +809,13 @@ static struct its_vpe *its_build_vmapp_c
 	its_encode_vpt_addr(cmd, vpt_addr);
 	its_encode_vpt_size(cmd, LPI_NRBITS - 1);
 
+	alloc = !atomic_fetch_inc(&desc->its_vmapp_cmd.vpe->vmapp_count);
+
 	if (!is_v4_1(its))
 		goto out;
 
 	vconf_addr = virt_to_phys(page_address(desc->its_vmapp_cmd.vpe->its_vm->vprop_page));
 
-	alloc = !atomic_fetch_inc(&desc->its_vmapp_cmd.vpe->vmapp_count);
-
 	its_encode_alloc(cmd, alloc);
 
 	/* We can only signal PTZ when alloc==1. Why do we have two bits? */
@@ -3793,6 +3793,13 @@ static int its_vpe_set_affinity(struct i
 	int from, cpu;
 
 	/*
+	 * Check if we're racing against a VPE being destroyed, for
+	 * which we don't want to allow a VMOVP.
+	 */
+	if (!atomic_read(&vpe->vmapp_count))
+		return -EINVAL;
+
+	/*
 	 * Changing affinity is mega expensive, so let's be as lazy as
 	 * we can and only do it if we really have to. Also, if mapped
 	 * into the proxy device, we need to move the doorbell
@@ -4424,9 +4431,8 @@ static int its_vpe_init(struct its_vpe *
 	raw_spin_lock_init(&vpe->vpe_lock);
 	vpe->vpe_id = vpe_id;
 	vpe->vpt_page = vpt_page;
-	if (gic_rdists->has_rvpeid)
-		atomic_set(&vpe->vmapp_count, 0);
-	else
+	atomic_set(&vpe->vmapp_count, 0);
+	if (!gic_rdists->has_rvpeid)
 		vpe->vpe_proxy_event = -1;
 
 	return 0;
--- a/include/linux/irqchip/arm-gic-v4.h
+++ b/include/linux/irqchip/arm-gic-v4.h
@@ -56,10 +56,12 @@ struct its_vpe {
 				bool	enabled;
 				bool	group;
 			}			sgi_config[16];
-			atomic_t vmapp_count;
 		};
 	};
 
+	/* Track the VPE being mapped */
+	atomic_t vmapp_count;
+
 	/*
 	 * Ensures mutual exclusion between affinity setting of the
 	 * vPE and vLPI operations using vpe->col_idx.

[PATCH 5.10 47/52] mptcp: track and update contiguous data status

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geliang Tang <geliang.tang@suse.com>

commit 0530020a7c8f2204e784f0dbdc882bbd961fdbde upstream.

This patch adds a new member allow_infinite_fallback in mptcp_sock,
which is initialized to 'true' when the connection begins and is set
to 'false' on any retransmit or successful MP_JOIN. Only do infinite
mapping fallback if there is a single subflow AND there have been no
retransmissions AND there have never been any MP_JOINs.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e32d262c89e2 ("mptcp: handle consistently DSS corruption")
[ Conflicts in protocol.c, because commit 3e5014909b56 ("mptcp: cleanup
  MPJ subflow list handling") is not in this version. This commit is
  linked to a new feature, changing the context around. The new line
  can still be added at the same place.
  Conflicts in protocol.h, because commit 4f6e14bd19d6 ("mptcp: support
  TCP_CORK and TCP_NODELAY") is not in this version. This commit is
  linked to a new feature, changing the context around. The new line can
  still be added at the same place.
  Conflicts in subflow.c, because commit 0348c690ed37 ("mptcp: add the
  fallback check") is not in this version. This commit is linked to a
  new feature, changing the context around. The new line can still be
  added at the same place.
  Extra conflicts in v5.10, because the context has been changed. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/protocol.c |    6 +++++-
 net/mptcp/protocol.h |    1 +
 net/mptcp/subflow.c  |    1 +
 3 files changed, 7 insertions(+), 1 deletion(-)

--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -1810,9 +1810,11 @@ static void mptcp_worker(struct work_str
 		if (!mptcp_ext_cache_refill(msk))
 			break;
 	}
-	if (copied)
+	if (copied) {
 		tcp_push(ssk, msg.msg_flags, mss_now, tcp_sk(ssk)->nonagle,
 			 size_goal);
+		WRITE_ONCE(msk->allow_infinite_fallback, false);
+	}
 
 	dfrag->data_seq = orig_write_seq;
 	dfrag->offset = orig_offset;
@@ -1845,6 +1847,7 @@ static int __mptcp_init_sock(struct sock
 
 	msk->first = NULL;
 	inet_csk(sk)->icsk_sync_mss = mptcp_sync_mss;
+	WRITE_ONCE(msk->allow_infinite_fallback, true);
 
 	mptcp_pm_data_init(msk);
 
@@ -2543,6 +2546,7 @@ bool mptcp_finish_join(struct sock *sk)
 	if (parent_sock && !sk->sk_socket)
 		mptcp_sock_graft(sk, parent_sock);
 	subflow->map_seq = READ_ONCE(msk->ack_seq);
+	WRITE_ONCE(msk->allow_infinite_fallback, false);
 	return true;
 }
 
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -213,6 +213,7 @@ struct mptcp_sock {
 	bool		rcv_data_fin;
 	bool		snd_data_fin_enable;
 	bool		use_64bit_ack; /* Set when we received a 64-bit DSN */
+	bool		allow_infinite_fallback;
 	spinlock_t	join_list_lock;
 	struct work_struct work;
 	struct sk_buff  *ooo_last_skb;
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -1179,6 +1179,7 @@ int __mptcp_subflow_connect(struct sock
 	list_add_tail(&subflow->node, &msk->join_list);
 	spin_unlock_bh(&msk->join_list_lock);
 
+	WRITE_ONCE(msk->allow_infinite_fallback, false);
 	return err;
 
 failed:

[PATCH 5.10 48/52] mptcp: handle consistently DSS corruption

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit e32d262c89e2b22cb0640223f953b548617ed8a6 upstream.

Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.

Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mib.[ch], because commit 104125b82e5c ("mptcp: add mib
  for infinite map sending") is linked to a new feature, not available
  in this version. Resolving the conflicts is easy, simply adding the
  new lines declaring the new "DSS corruptions" MIB entries.
  Also removed in protocol.c and subflow.c all DEBUG_NET_WARN_ON_ONCE
  because they are not defined in this version: enough with the MIB
  counters that have been added in this commit. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mptcp/mib.c      |    2 ++
 net/mptcp/mib.h      |    2 ++
 net/mptcp/protocol.c |   20 +++++++++++++++++---
 net/mptcp/subflow.c  |    2 +-
 4 files changed, 22 insertions(+), 4 deletions(-)

--- a/net/mptcp/mib.c
+++ b/net/mptcp/mib.c
@@ -23,6 +23,8 @@ static const struct snmp_mib mptcp_snmp_
 	SNMP_MIB_ITEM("MPJoinAckRx", MPTCP_MIB_JOINACKRX),
 	SNMP_MIB_ITEM("MPJoinAckHMacFailure", MPTCP_MIB_JOINACKMAC),
 	SNMP_MIB_ITEM("DSSNotMatching", MPTCP_MIB_DSSNOMATCH),
+	SNMP_MIB_ITEM("DSSCorruptionFallback", MPTCP_MIB_DSSCORRUPTIONFALLBACK),
+	SNMP_MIB_ITEM("DSSCorruptionReset", MPTCP_MIB_DSSCORRUPTIONRESET),
 	SNMP_MIB_ITEM("InfiniteMapRx", MPTCP_MIB_INFINITEMAPRX),
 	SNMP_MIB_ITEM("OFOQueueTail", MPTCP_MIB_OFOQUEUETAIL),
 	SNMP_MIB_ITEM("OFOQueue", MPTCP_MIB_OFOQUEUE),
--- a/net/mptcp/mib.h
+++ b/net/mptcp/mib.h
@@ -16,6 +16,8 @@ enum linux_mptcp_mib_field {
 	MPTCP_MIB_JOINACKRX,		/* Received an ACK + MP_JOIN */
 	MPTCP_MIB_JOINACKMAC,		/* HMAC was wrong on ACK + MP_JOIN */
 	MPTCP_MIB_DSSNOMATCH,		/* Received a new mapping that did not match the previous one */
+	MPTCP_MIB_DSSCORRUPTIONFALLBACK,/* DSS corruption detected, fallback */
+	MPTCP_MIB_DSSCORRUPTIONRESET,	/* DSS corruption detected, MPJ subflow reset */
 	MPTCP_MIB_INFINITEMAPRX,	/* Received an infinite mapping */
 	MPTCP_MIB_OFOQUEUETAIL,	/* Segments inserted into OoO queue tail */
 	MPTCP_MIB_OFOQUEUE,		/* Segments inserted into OoO queue */
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -457,6 +457,18 @@ static void mptcp_check_data_fin(struct
 	}
 }
 
+static void mptcp_dss_corruption(struct mptcp_sock *msk, struct sock *ssk)
+{
+	if (READ_ONCE(msk->allow_infinite_fallback)) {
+		MPTCP_INC_STATS(sock_net(ssk),
+				MPTCP_MIB_DSSCORRUPTIONFALLBACK);
+		mptcp_do_fallback(ssk);
+	} else {
+		MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_DSSCORRUPTIONRESET);
+		mptcp_subflow_reset(ssk);
+	}
+}
+
 static bool __mptcp_move_skbs_from_subflow(struct mptcp_sock *msk,
 					   struct sock *ssk,
 					   unsigned int *bytes)
@@ -519,10 +531,12 @@ static bool __mptcp_move_skbs_from_subfl
 				moved += len;
 			seq += len;
 
-			if (WARN_ON_ONCE(map_remaining < len))
-				break;
+			if (unlikely(map_remaining < len))
+				mptcp_dss_corruption(msk, ssk);
 		} else {
-			WARN_ON_ONCE(!fin);
+			if (unlikely(!fin))
+				mptcp_dss_corruption(msk, ssk);
+
 			sk_eat_skb(ssk, skb);
 			done = true;
 		}
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -702,7 +702,7 @@ static bool skb_is_fully_mapped(struct s
 	unsigned int skb_consumed;
 
 	skb_consumed = tcp_sk(ssk)->copied_seq - TCP_SKB_CB(skb)->seq;
-	if (WARN_ON_ONCE(skb_consumed >= skb->len))
+	if (unlikely(skb_consumed >= skb->len))
 		return true;
 
 	return skb->len - skb_consumed <= subflow->map_data_len -

[PATCH 5.10 49/52] tcp: fix mptcp DSS corruption due to large pmtu xmit

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>

commit 4dabcdf581217e60690467a37c956a5b8dbc6bd9 upstream.

Syzkaller was able to trigger a DSS corruption:

  TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
  Modules linked in:
  CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
  RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
  Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff
  RSP: 0018:ffffc90000006db8 EFLAGS: 00010246
  RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00
  RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0
  RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8
  R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000
  R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5
  FS:  000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   move_skbs_to_msk net/mptcp/protocol.c:811 [inline]
   mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854
   subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490
   tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283
   tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237
   tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
   tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350
   ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
   ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
   NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
   NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
   __netif_receive_skb_one_core net/core/dev.c:5662 [inline]
   __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
   process_backlog+0x662/0x15b0 net/core/dev.c:6107
   __napi_poll+0xcb/0x490 net/core/dev.c:6771
   napi_poll net/core/dev.c:6840 [inline]
   net_rx_action+0x89b/0x1240 net/core/dev.c:6962
   handle_softirqs+0x2c5/0x980 kernel/softirq.c:554
   do_softirq+0x11b/0x1e0 kernel/softirq.c:455
   </IRQ>
   <TASK>
   __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
   local_bh_enable include/linux/bottom_half.h:33 [inline]
   rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
   __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451
   dev_queue_xmit include/linux/netdevice.h:3094 [inline]
   neigh_hh_output include/net/neighbour.h:526 [inline]
   neigh_output include/net/neighbour.h:540 [inline]
   ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236
   ip_local_out net/ipv4/ip_output.c:130 [inline]
   __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536
   __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
   tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
   tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline]
   tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752
   __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015
   tcp_push_pending_frames include/net/tcp.h:2107 [inline]
   tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline]
   tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239
   tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
   sk_backlog_rcv include/net/sock.h:1113 [inline]
   __release_sock+0x214/0x350 net/core/sock.c:3072
   release_sock+0x61/0x1f0 net/core/sock.c:3626
   mptcp_push_release net/mptcp/protocol.c:1486 [inline]
   __mptcp_push_pending+0x6b5/0x9f0 net/mptcp/protocol.c:1625
   mptcp_sendmsg+0x10bb/0x1b10 net/mptcp/protocol.c:1903
   sock_sendmsg_nosec net/socket.c:730 [inline]
   __sock_sendmsg+0x1a6/0x270 net/socket.c:745
   ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2603
   ___sys_sendmsg net/socket.c:2657 [inline]
   __sys_sendmsg+0x2aa/0x390 net/socket.c:2686
   do_syscall_x64 arch/x86/entry/common.c:52 [inline]
   do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
  RIP: 0033:0x7fb06e9317f9
  Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007ffe2cfd4f98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
  RAX: ffffffffffffffda RBX: 00007fb06e97f468 RCX: 00007fb06e9317f9
  RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000005
  RBP: 00007fb06e97f446 R08: 0000555500000000 R09: 0000555500000000
  R10: 0000555500000000 R11: 0000000000000246 R12: 00007fb06e97f406
  R13: 0000000000000001 R14: 00007ffe2cfd4fe0 R15: 0000000000000003
   </TASK>

Additionally syzkaller provided a nice reproducer. The repro enables
pmtu on the loopback device, leading to tcp_mtu_probe() generating
very large probe packets.

tcp_can_coalesce_send_queue_head() currently does not check for
mptcp-level invariants, and allowed the creation of cross-DSS probes,
leading to the mentioned corruption.

Address the issue teaching tcp_can_coalesce_send_queue_head() about
mptcp using the tcp_skb_can_collapse(), also reducing the code
duplication.

Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions")
Cc: stable@vger.kernel.org
Reported-by: syzbot+d1bff73460e33101f0e7@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/513
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-2-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in tcp_output.c, because commit 65249feb6b3d ("net: add
  support for skbs with unreadable frags"), and commit 9b65b17db723
  ("net: avoid double accounting for pure zerocopy skbs") are not in
  this version. These commits are linked to new features and introduce
  new conditions which cause the conflicts. Resolving this is easy: we
  can ignore the missing new condition, and use tcp_skb_can_collapse()
  like in the original patch. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2305,7 +2305,7 @@ static bool tcp_can_coalesce_send_queue_
 		if (len <= skb->len)
 			break;
 
-		if (unlikely(TCP_SKB_CB(skb)->eor) || tcp_has_tx_tstamp(skb))
+		if (tcp_has_tx_tstamp(skb) || !tcp_skb_can_collapse(skb, next))
 			return false;
 
 		len -= skb->len;

[PATCH 5.10 50/52] nilfs2: propagate directory read errors from nilfs_find_entry()

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 08cfa12adf888db98879dbd735bc741360a34168 upstream.

Syzbot reported that a task hang occurs in vcs_open() during a fuzzing
test for nilfs2.

The root cause of this problem is that in nilfs_find_entry(), which
searches for directory entries, ignores errors when loading a directory
page/folio via nilfs_get_folio() fails.

If the filesystem images is corrupted, and the i_size of the directory
inode is large, and the directory page/folio is successfully read but
fails the sanity check, for example when it is zero-filled,
nilfs_check_folio() may continue to spit out error messages in bursts.

Fix this issue by propagating the error to the callers when loading a
page/folio fails in nilfs_find_entry().

The current interface of nilfs_find_entry() and its callers is outdated
and cannot propagate error codes such as -EIO and -ENOMEM returned via
nilfs_find_entry(), so fix it together.

Link: https://lkml.kernel.org/r/20241004033640.6841-1-konishi.ryusuke@gmail.com
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Closes: https://lkml.kernel.org/r/20240927013806.3577931-1-lizhi.xu@windriver.com
Reported-by: syzbot+8a192e8d090fa9a31135@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a192e8d090fa9a31135
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/dir.c   |   50 +++++++++++++++++++++++++++-----------------------
 fs/nilfs2/namei.c |   39 ++++++++++++++++++++++++++-------------
 fs/nilfs2/nilfs.h |    2 +-
 3 files changed, 54 insertions(+), 37 deletions(-)

--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -331,6 +331,8 @@ static int nilfs_readdir(struct file *fi
  * returns the page in which the entry was found, and the entry itself
  * (as a parameter - res_dir). Page is returned mapped and unlocked.
  * Entry is guaranteed to be valid.
+ *
+ * On failure, returns an error pointer and the caller should ignore res_page.
  */
 struct nilfs_dir_entry *
 nilfs_find_entry(struct inode *dir, const struct qstr *qstr,
@@ -358,22 +360,24 @@ nilfs_find_entry(struct inode *dir, cons
 	do {
 		char *kaddr = nilfs_get_page(dir, n, &page);
 
-		if (!IS_ERR(kaddr)) {
-			de = (struct nilfs_dir_entry *)kaddr;
-			kaddr += nilfs_last_byte(dir, n) - reclen;
-			while ((char *) de <= kaddr) {
-				if (de->rec_len == 0) {
-					nilfs_error(dir->i_sb,
-						"zero-length directory entry");
-					nilfs_put_page(page);
-					goto out;
-				}
-				if (nilfs_match(namelen, name, de))
-					goto found;
-				de = nilfs_next_entry(de);
+		if (IS_ERR(kaddr))
+			return ERR_CAST(kaddr);
+
+		de = (struct nilfs_dir_entry *)kaddr;
+		kaddr += nilfs_last_byte(dir, n) - reclen;
+		while ((char *)de <= kaddr) {
+			if (de->rec_len == 0) {
+				nilfs_error(dir->i_sb,
+					    "zero-length directory entry");
+				nilfs_put_page(page);
+				goto out;
 			}
-			nilfs_put_page(page);
+			if (nilfs_match(namelen, name, de))
+				goto found;
+			de = nilfs_next_entry(de);
 		}
+		nilfs_put_page(page);
+
 		if (++n >= npages)
 			n = 0;
 		/* next page is past the blocks we've got */
@@ -386,7 +390,7 @@ nilfs_find_entry(struct inode *dir, cons
 		}
 	} while (n != start);
 out:
-	return NULL;
+	return ERR_PTR(-ENOENT);
 
 found:
 	*res_page = page;
@@ -431,19 +435,19 @@ fail:
 	return NULL;
 }
 
-ino_t nilfs_inode_by_name(struct inode *dir, const struct qstr *qstr)
+int nilfs_inode_by_name(struct inode *dir, const struct qstr *qstr, ino_t *ino)
 {
-	ino_t res = 0;
 	struct nilfs_dir_entry *de;
 	struct page *page;
 
 	de = nilfs_find_entry(dir, qstr, &page);
-	if (de) {
-		res = le64_to_cpu(de->inode);
-		kunmap(page);
-		put_page(page);
-	}
-	return res;
+	if (IS_ERR(de))
+		return PTR_ERR(de);
+
+	*ino = le64_to_cpu(de->inode);
+	kunmap(page);
+	put_page(page);
+	return 0;
 }
 
 /* Releases the page */
--- a/fs/nilfs2/namei.c
+++ b/fs/nilfs2/namei.c
@@ -55,12 +55,20 @@ nilfs_lookup(struct inode *dir, struct d
 {
 	struct inode *inode;
 	ino_t ino;
+	int res;
 
 	if (dentry->d_name.len > NILFS_NAME_LEN)
 		return ERR_PTR(-ENAMETOOLONG);
 
-	ino = nilfs_inode_by_name(dir, &dentry->d_name);
-	inode = ino ? nilfs_iget(dir->i_sb, NILFS_I(dir)->i_root, ino) : NULL;
+	res = nilfs_inode_by_name(dir, &dentry->d_name, &ino);
+	if (res) {
+		if (res != -ENOENT)
+			return ERR_PTR(res);
+		inode = NULL;
+	} else {
+		inode = nilfs_iget(dir->i_sb, NILFS_I(dir)->i_root, ino);
+	}
+
 	return d_splice_alias(inode, dentry);
 }
 
@@ -261,10 +269,11 @@ static int nilfs_do_unlink(struct inode
 	struct page *page;
 	int err;
 
-	err = -ENOENT;
 	de = nilfs_find_entry(dir, &dentry->d_name, &page);
-	if (!de)
+	if (IS_ERR(de)) {
+		err = PTR_ERR(de);
 		goto out;
+	}
 
 	inode = d_inode(dentry);
 	err = -EIO;
@@ -358,10 +367,11 @@ static int nilfs_rename(struct inode *ol
 	if (unlikely(err))
 		return err;
 
-	err = -ENOENT;
 	old_de = nilfs_find_entry(old_dir, &old_dentry->d_name, &old_page);
-	if (!old_de)
+	if (IS_ERR(old_de)) {
+		err = PTR_ERR(old_de);
 		goto out;
+	}
 
 	if (S_ISDIR(old_inode->i_mode)) {
 		err = -EIO;
@@ -378,10 +388,12 @@ static int nilfs_rename(struct inode *ol
 		if (dir_de && !nilfs_empty_dir(new_inode))
 			goto out_dir;
 
-		err = -ENOENT;
-		new_de = nilfs_find_entry(new_dir, &new_dentry->d_name, &new_page);
-		if (!new_de)
+		new_de = nilfs_find_entry(new_dir, &new_dentry->d_name,
+					  &new_page);
+		if (IS_ERR(new_de)) {
+			err = PTR_ERR(new_de);
 			goto out_dir;
+		}
 		nilfs_set_link(new_dir, new_de, new_page, old_inode);
 		nilfs_mark_inode_dirty(new_dir);
 		new_inode->i_ctime = current_time(new_inode);
@@ -435,14 +447,15 @@ out:
  */
 static struct dentry *nilfs_get_parent(struct dentry *child)
 {
-	unsigned long ino;
+	ino_t ino;
+	int res;
 	struct inode *inode;
 	struct qstr dotdot = QSTR_INIT("..", 2);
 	struct nilfs_root *root;
 
-	ino = nilfs_inode_by_name(d_inode(child), &dotdot);
-	if (!ino)
-		return ERR_PTR(-ENOENT);
+	res = nilfs_inode_by_name(d_inode(child), &dotdot, &ino);
+	if (res)
+		return ERR_PTR(res);
 
 	root = NILFS_I(d_inode(child))->i_root;
 
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -233,7 +233,7 @@ static inline __u32 nilfs_mask_flags(umo
 
 /* dir.c */
 extern int nilfs_add_link(struct dentry *, struct inode *);
-extern ino_t nilfs_inode_by_name(struct inode *, const struct qstr *);
+int nilfs_inode_by_name(struct inode *dir, const struct qstr *qstr, ino_t *ino);
 extern int nilfs_make_empty(struct inode *, struct inode *);
 extern struct nilfs_dir_entry *
 nilfs_find_entry(struct inode *, const struct qstr *, struct page **);

[PATCH 5.10 51/52] powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 7b31f7dadd7074fa70bb14a53bd286ffdfc98b04 upstream.

For both CONFIG_NUMA enabled/disabled use mem_topology_setup() to
update max/min_low_pfn.

This also adds min_low_pfn update to CONFIG_NUMA which was initialized
to zero before. (mpe: Though MEMORY_START is == 0 for PPC64=y which is
all possible NUMA=y systems)

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220704063851.295482-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/mm/numa.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1177,6 +1177,9 @@ void __init mem_topology_setup(void)
 {
 	int cpu;
 
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	min_low_pfn = MEMORY_START >> PAGE_SHIFT;
+
 	/*
 	 * Linux/mm assumes node 0 to be online at boot. However this is not
 	 * true on PowerPC, where node 0 is similar to any other node, it
@@ -1221,9 +1224,6 @@ void __init initmem_init(void)
 {
 	int nid;
 
-	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
-	max_pfn = max_low_pfn;
-
 	memblock_dump_all();
 
 	for_each_online_node(nid) {

[PATCH 5.10 52/52] ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2

[Greg Kroah-Hartman]

5.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vasiliy Kovalev <kovalev@altlinux.org>

commit 164cd0e077a18d6208523c82b102c98c77fdd51f upstream.

The cached version avoids redundant commands to the codec, improving
stability and reducing unnecessary operations. This change ensures
better power management and reliable restoration of pin configurations,
especially after hibernation (S4) and other power transitions.

Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2")
Suggested-by: Kai-Heng Feng <kaihengf@nvidia.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_conexant.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -261,7 +261,7 @@ static void cxt_fixup_update_pinctl(stru
 		 * This is the value stored in the codec register after
 		 * the correct initialization of the previous windows boot.
 		 */
-		snd_hda_set_pin_ctl(codec, 0x1d, AC_PINCTL_HP_EN);
+		snd_hda_set_pin_ctl_cache(codec, 0x1d, AC_PINCTL_HP_EN);
 	}
 }
 

Re: [PATCH 5.10 00/52] 5.10.228-rc1 review

[Florian Fainelli]

On 10/21/24 03:25, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.228 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.228-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 5.10 00/52] 5.10.228-rc1 review

[Naresh Kamboju]

On Mon, 21 Oct 2024 at 16:20, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.228 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.228-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.228-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 11656f6fe2df8ad7262fe635fd9a53f66bb23102
* git describe: v5.10.227-53-g11656f6fe2df
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.227-53-g11656f6fe2df

## Test Regressions (compared to v5.10.226-519-g5807510dd577)

## Metric Regressions (compared to v5.10.226-519-g5807510dd577)

## Test Fixes (compared to v5.10.226-519-g5807510dd577)

## Metric Fixes (compared to v5.10.226-519-g5807510dd577)

## Test result summary
total: 59318, pass: 43619, fail: 1978, skip: 13654, xfail: 67

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 102 total, 102 passed, 0 failed
* arm64: 29 total, 29 passed, 0 failed
* i386: 23 total, 23 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* parisc: 3 total, 0 passed, 3 failed
* powerpc: 23 total, 23 passed, 0 failed
* riscv: 9 total, 9 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 25 total, 25 passed, 0 failed

## Test suites summary
* boot
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kunit
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 00/52] 5.10.228-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 641 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.228 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel


DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 00/52] 5.10.228-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 346 bytes --]

On Mon, Oct 21, 2024 at 12:25:21PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.228 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 5.10 00/52] 5.10.228-rc1 review

[Jon Hunter]

On Mon, 21 Oct 2024 12:25:21 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.228 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.228-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    67 tests:	67 pass, 0 fail

Linux version:	5.10.228-rc1-g11656f6fe2df
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.10 00/52] 5.10.228-rc1 review

[Muhammad Usama Anjum]

On 10/21/24 3:25 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.228 release.
> There are 52 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Oct 2024 10:22:25 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.228-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
Hi,

Please find the KernelCI report below :-


OVERVIEW

    Builds: 24 passed, 0 failed

    Boot tests: 53 passed, 1 failed

    CI systems: maestro

REVISION

    Commit
        name: 
        hash: 11656f6fe2df8ad7262fe635fd9a53f66bb23102
    Checked out from
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y


BUILDS

    No new build failures found

BOOT TESTS

      Failures
      - i386 (defconfig)
      Error detail: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
                    BUG: kernel NULL pointer dereference, address: 00000000
      Build error: https://kcidb.kernelci.org/d/test/test?var-datasource=edquppk2ghfcwc&var-origin=maestro&var-build_architecture=All&var-build_config_name=All&var-id=maestro:671648503eaa4b46ca68a35c&orgId=1

See complete and up-to-date report at:
 https://kcidb.kernelci.org/d/revision/revision?orgId=1&var-datasource=edquppk2ghfcwc&var-git_commit_hash=11656f6fe2df8ad7262fe635fd9a53f66bb23102&var-patchset_hash=&var-origin=maestro&var-build_architecture=All&var-build_config_name=All&var-test_path=boot

Tested-by: kernelci.org bot <bot@kernelci.org>

Thanks,
KernelCI team