From: <gregkh@linuxfoundation.org>
To: bsevens@google.com,tiwai@suse.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ALSA: usb-audio: Fix potential out-of-bound accesses for" failed to apply to 6.6-stable tree
Date: Mon, 02 Dec 2024 12:00:00 +0100 [thread overview]
Message-ID: <2024120200-dangling-delegate-dfab@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x b909df18ce2a998afef81d58bbd1a05dc0788c40
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024120200-dangling-delegate-dfab@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From b909df18ce2a998afef81d58bbd1a05dc0788c40 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Beno=C3=AEt=20Sevens?= <bsevens@google.com>
Date: Wed, 20 Nov 2024 12:41:44 +0000
Subject: [PATCH] ALSA: usb-audio: Fix potential out-of-bound accesses for
Extigy and Mbox devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.
Signed-off-by: Benoît Sevens <bsevens@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Link: https://patch.msgid.link/20241120124144.3814457-1-bsevens@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index cbfbb064a9c2..8bc959b60be3 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -555,6 +555,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
{
struct usb_host_config *config = dev->actconfig;
+ struct usb_device_descriptor new_device_descriptor;
int err;
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
@@ -566,10 +567,14 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
if (err < 0)
dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
@@ -901,6 +906,7 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev)
static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
+ struct usb_device_descriptor new_device_descriptor;
int err;
u8 bootresponse[0x12];
int fwsize;
@@ -936,10 +942,14 @@ static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "device initialised!\n");
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ dev_dbg(&dev->dev, "error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
@@ -1249,6 +1259,7 @@ static void mbox3_setup_defaults(struct usb_device *dev)
static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
{
struct usb_host_config *config = dev->actconfig;
+ struct usb_device_descriptor new_device_descriptor;
int err;
int descriptor_size;
@@ -1262,10 +1273,14 @@ static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "MBOX3: device initialised!\n");
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
+ &new_device_descriptor, sizeof(new_device_descriptor));
if (err < 0)
dev_dbg(&dev->dev, "MBOX3: error usb_get_descriptor: %d\n", err);
+ if (new_device_descriptor.bNumConfigurations > dev->descriptor.bNumConfigurations)
+ dev_dbg(&dev->dev, "MBOX3: error too large bNumConfigurations: %d\n",
+ new_device_descriptor.bNumConfigurations);
+ else
+ memcpy(&dev->descriptor, &new_device_descriptor, sizeof(dev->descriptor));
err = usb_reset_configuration(dev);
if (err < 0)
next reply other threads:[~2024-12-02 11:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-02 11:00 gregkh [this message]
2024-12-02 12:15 ` [PATCH 6.6.y] ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices Benoît Sevens
2024-12-02 16:57 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024120200-dangling-delegate-dfab@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=bsevens@google.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox