From: <gregkh@linuxfoundation.org>
To: kailang@realtek.com,stable@vger.kernel.org,tiwai@suse.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ALSA: hda/realtek: Update ALC225 depop procedure" failed to apply to 4.19-stable tree
Date: Tue, 03 Dec 2024 11:29:03 +0100 [thread overview]
Message-ID: <2024120303-talcum-editor-4060@gregkh> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y
git checkout FETCH_HEAD
git cherry-pick -x 1fd50509fe14a9adc9329e0454b986157a4c155a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024120303-talcum-editor-4060@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1fd50509fe14a9adc9329e0454b986157a4c155a Mon Sep 17 00:00:00 2001
From: Kailang Yang <kailang@realtek.com>
Date: Thu, 14 Nov 2024 15:08:07 +0800
Subject: [PATCH] ALSA: hda/realtek: Update ALC225 depop procedure
Old procedure has a chance to meet Headphone no output.
Fixes: da911b1f5e98 ("ALSA: hda/realtek - update ALC225 depop optimize")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/5a27b016ba9d42b4a4e6dadce50a3ba4@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 290c0710f24d..c53a5f8d1559 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3768,33 +3768,28 @@ static void alc225_init(struct hda_codec *codec)
hp1_pin_sense = snd_hda_jack_detect(codec, hp_pin);
hp2_pin_sense = snd_hda_jack_detect(codec, 0x16);
- if (hp1_pin_sense || hp2_pin_sense)
+ if (hp1_pin_sense || hp2_pin_sense) {
msleep(2);
+ alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
- alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
+ if (hp1_pin_sense)
+ snd_hda_codec_write(codec, hp_pin, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ if (hp2_pin_sense)
+ snd_hda_codec_write(codec, 0x16, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ msleep(75);
- if (hp1_pin_sense || spec->ultra_low_power)
- snd_hda_codec_write(codec, hp_pin, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
- if (hp2_pin_sense)
- snd_hda_codec_write(codec, 0x16, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ if (hp1_pin_sense)
+ snd_hda_codec_write(codec, hp_pin, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ if (hp2_pin_sense)
+ snd_hda_codec_write(codec, 0x16, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
- if (hp1_pin_sense || hp2_pin_sense || spec->ultra_low_power)
- msleep(85);
-
- if (hp1_pin_sense || spec->ultra_low_power)
- snd_hda_codec_write(codec, hp_pin, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
- if (hp2_pin_sense)
- snd_hda_codec_write(codec, 0x16, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
-
- if (hp1_pin_sense || hp2_pin_sense || spec->ultra_low_power)
- msleep(100);
-
- alc_update_coef_idx(codec, 0x4a, 3 << 10, 0);
- alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */
+ msleep(75);
+ alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */
+ }
}
static void alc225_shutup(struct hda_codec *codec)
@@ -3806,36 +3801,35 @@ static void alc225_shutup(struct hda_codec *codec)
if (!hp_pin)
hp_pin = 0x21;
- alc_disable_headset_jack_key(codec);
- /* 3k pull low control for Headset jack. */
- alc_update_coef_idx(codec, 0x4a, 0, 3 << 10);
-
hp1_pin_sense = snd_hda_jack_detect(codec, hp_pin);
hp2_pin_sense = snd_hda_jack_detect(codec, 0x16);
- if (hp1_pin_sense || hp2_pin_sense)
+ if (hp1_pin_sense || hp2_pin_sense) {
+ alc_disable_headset_jack_key(codec);
+ /* 3k pull low control for Headset jack. */
+ alc_update_coef_idx(codec, 0x4a, 0, 3 << 10);
msleep(2);
- if (hp1_pin_sense || spec->ultra_low_power)
- snd_hda_codec_write(codec, hp_pin, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
- if (hp2_pin_sense)
- snd_hda_codec_write(codec, 0x16, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ if (hp1_pin_sense)
+ snd_hda_codec_write(codec, hp_pin, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ if (hp2_pin_sense)
+ snd_hda_codec_write(codec, 0x16, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
- if (hp1_pin_sense || hp2_pin_sense || spec->ultra_low_power)
- msleep(85);
+ msleep(75);
- if (hp1_pin_sense || spec->ultra_low_power)
- snd_hda_codec_write(codec, hp_pin, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
- if (hp2_pin_sense)
- snd_hda_codec_write(codec, 0x16, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
-
- if (hp1_pin_sense || hp2_pin_sense || spec->ultra_low_power)
- msleep(100);
+ if (hp1_pin_sense)
+ snd_hda_codec_write(codec, hp_pin, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+ if (hp2_pin_sense)
+ snd_hda_codec_write(codec, 0x16, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+ msleep(75);
+ alc_update_coef_idx(codec, 0x4a, 3 << 10, 0);
+ alc_enable_headset_jack_key(codec);
+ }
alc_auto_setup_eapd(codec, false);
alc_shutup_pins(codec);
if (spec->ultra_low_power) {
@@ -3846,9 +3840,6 @@ static void alc225_shutup(struct hda_codec *codec)
alc_update_coef_idx(codec, 0x4a, 3<<4, 2<<4);
msleep(30);
}
-
- alc_update_coef_idx(codec, 0x4a, 3 << 10, 0);
- alc_enable_headset_jack_key(codec);
}
static void alc_default_init(struct hda_codec *codec)
reply other threads:[~2024-12-03 10:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2024120303-talcum-editor-4060@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=kailang@realtek.com \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox