FAILED: patch "[PATCH] usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED" failed to apply to 6.6-stable tree

FAILED: patch "[PATCH] usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED" failed to apply to 6.6-stable tree

[gregkh]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 5d2fb074dea289c41f5aaf2c3f68286bee370634
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2024120322-subside-manhood-cb29@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 5d2fb074dea289c41f5aaf2c3f68286bee370634 Mon Sep 17 00:00:00 2001
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Date: Thu, 14 Nov 2024 01:02:06 +0000
Subject: [PATCH] usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED

The driver cannot issue the End Transfer command to the SETUP transfer.
Don't clear DWC3_EP_TRANSFER_STARTED flag to make sure that the driver
won't send Start Transfer command again, which can cause no-resource
error. For example this can occur if the host issues a reset to the
device.

Cc: stable@vger.kernel.org
Fixes: 76cb323f80ac ("usb: dwc3: ep0: clear all EP0 flags")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/d3d618185fd614bb7426352a9fc1199641d3b5f5.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index f3d97ad5156e..666ac432f52d 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -232,7 +232,7 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 	/* stall is always issued on EP0 */
 	dep = dwc->eps[0];
 	__dwc3_gadget_ep_set_halt(dep, 1, false);
-	dep->flags &= DWC3_EP_RESOURCE_ALLOCATED;
+	dep->flags &= DWC3_EP_RESOURCE_ALLOCATED | DWC3_EP_TRANSFER_STARTED;
 	dep->flags |= DWC3_EP_ENABLED;
 	dwc->delayed_status = false;