[PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[jianqi.ren.cn]

From: Wayne Lin <wayne.lin@amd.com>

[ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]

[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.

It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.

[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 1acef5f3838f..a1619f4569cf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
 		dc_sink_release(dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 	}
 
 	aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		dc_sink_release(aconnector->dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 
 		amdgpu_dm_set_mst_status(&aconnector->mst_status,
 			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
-- 
2.25.1

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Sasha Levin]

[ Sasha's backport helper bot ]

Hi,

The upstream commit SHA1 provided is correct: fcf6a49d79923a234844b8efe830a61f3f0584e4

WARNING: Author mismatch between patch and upstream commit:
Backport author: <jianqi.ren.cn@windriver.com>
Commit author: Wayne Lin <wayne.lin@amd.com>


Status in newer kernel trees:
6.12.y | Present (exact SHA1)
6.6.y | Present (different SHA1: 77b96aa2e06c)
6.1.y | Not found

Note: The patch differs from the upstream commit:
---
1:  fcf6a49d79923 ! 1:  5ff7cd9148131 drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
    @@ Metadata
      ## Commit message ##
         drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
     
    +    [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
    +
         [Why]
         When unplug one of monitors connected after mst hub, encounter null pointer dereference.
     
    @@ Commit message
         Signed-off-by: Wayne Lin <wayne.lin@amd.com>
         Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
         Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
    +    Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
     
      ## drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c ##
     @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
    @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: dm_dp_mst_detect(st
      
      		amdgpu_dm_set_mst_status(&aconnector->mst_status,
      			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
    -@@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: static bool is_dsc_need_re_compute(
    - 		if (!aconnector || !aconnector->dsc_aux)
    - 			continue;
    - 
    --		/*
    --		 *	check if cached virtual MST DSC caps are available and DSC is supported
    --		 *	as per specifications in their Virtual DPCD registers.
    --		*/
    --		if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported ||
    --			aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))
    --			continue;
    --
    - 		stream_on_link[new_stream_on_link_num] = aconnector;
    - 		new_stream_on_link_num++;
    - 
---

Results of testing on various branches:

| Branch                    | Patch Apply | Build Test |
|---------------------------|-------------|------------|
| stable/linux-6.1.y        |  Success    |  Success   |

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Harshit Mogalapalli]

Hi Jianqi,

On 09/12/24 12:06, jianqi.ren.cn@windriver.com wrote:
> From: Wayne Lin <wayne.lin@amd.com>
> 
> [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
> 
> [Why]
> When unplug one of monitors connected after mst hub, encounter null pointer dereference.
> 
> It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
> commit new state which directly referring to info stored in dc_sink will cause null pointer
> dereference.
> 
> [how]
> Remove redundant checking condition. Relevant condition should already be covered by checking
> if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.
> 
> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
> Signed-off-by: Wayne Lin <wayne.lin@amd.com>
> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
> ---
>   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> index 1acef5f3838f..a1619f4569cf 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
> @@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
>   		dc_sink_release(dc_sink);
>   		aconnector->dc_sink = NULL;
>   		aconnector->edid = NULL;
> +		aconnector->dsc_aux = NULL;
> +		port->passthrough_aux = NULL;
>   	}
>   
>   	aconnector->mst_status = MST_STATUS_DEFAULT;
> @@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
>   		dc_sink_release(aconnector->dc_sink);
>   		aconnector->dc_sink = NULL;
>   		aconnector->edid = NULL;
> +		aconnector->dsc_aux = NULL;
> +		port->passthrough_aux = NULL;
>   
>   		amdgpu_dm_set_mst_status(&aconnector->mst_status,
>   			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,

This backport doesn't look right to me, can you please clarify these.

1.  I think it is worth documenting in commit message just before your 
SOB on why you don't need this hunk:

                         MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | 
MST_CLEAR_ALLOCATED_PAYLOAD,
@@ -1238,14 +1242,6 @@ static bool is_dsc_need_re_compute(
                 if (!aconnector || !aconnector->dsc_aux)
                         continue;

-               /*
-                *      check if cached virtual MST DSC caps are 
available and DSC is supported
-                *      as per specifications in their Virtual DPCD 
registers.
-               */
-               if 
(!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported ||
- 
aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))
-                       continue;
-
                 stream_on_link[new_stream_on_link_num] = aconnector;
                 new_stream_on_link_num++;


which is part of upstream, I understand that this is not in 6.1.y code, 
if so is it even affected ?

2. Also commit message says:

""
Remove redundant checking condition. Relevant condition should already 
be covered by checking if dsc_aux is null or not. Also reset dsc_aux to 
NULL when the connector is disconnected.
""

but the if(!aconnector->dsc_aux) is not in 6.1.y, so something is 
missing. Maybe 6.1.y is not affected or we need more backports to 6.1.y 
to make them clean cherry-picks ?

Thanks,
Harshit

[PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[jianqi.ren.cn]

From: Wayne Lin <wayne.lin@amd.com>

[ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]

[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.

It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.

[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 1acef5f3838f..a1619f4569cf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
 		dc_sink_release(dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 	}
 
 	aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		dc_sink_release(aconnector->dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 
 		amdgpu_dm_set_mst_status(&aconnector->mst_status,
 			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
-- 
2.25.1

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Sasha Levin]

[ Sasha's backport helper bot ]

Hi,

The upstream commit SHA1 provided is correct: fcf6a49d79923a234844b8efe830a61f3f0584e4

WARNING: Author mismatch between patch and upstream commit:
Backport author: <jianqi.ren.cn@windriver.com>
Commit author: Wayne Lin <wayne.lin@amd.com>


Status in newer kernel trees:
6.12.y | Present (exact SHA1)
6.6.y | Present (different SHA1: c7e65cab54a8)
6.1.y | Not found

Note: The patch differs from the upstream commit:
---
1:  fcf6a49d79923 ! 1:  82afb36e9f872 drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
    @@ Metadata
      ## Commit message ##
         drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
     
    +    [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
    +
         [Why]
         When unplug one of monitors connected after mst hub, encounter null pointer dereference.
     
    @@ Commit message
         Signed-off-by: Wayne Lin <wayne.lin@amd.com>
         Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
         Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
    +    Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
     
      ## drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c ##
     @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
    @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: dm_dp_mst_detect(st
      
      		amdgpu_dm_set_mst_status(&aconnector->mst_status,
      			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
    -@@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: static bool is_dsc_need_re_compute(
    - 		if (!aconnector || !aconnector->dsc_aux)
    - 			continue;
    - 
    --		/*
    --		 *	check if cached virtual MST DSC caps are available and DSC is supported
    --		 *	as per specifications in their Virtual DPCD registers.
    --		*/
    --		if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported ||
    --			aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))
    --			continue;
    --
    - 		stream_on_link[new_stream_on_link_num] = aconnector;
    - 		new_stream_on_link_num++;
    - 
---

Results of testing on various branches:

| Branch                    | Patch Apply | Build Test |
|---------------------------|-------------|------------|
| stable/linux-6.1.y        |  Success    |  Success   |

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Greg KH]

On Fri, Dec 06, 2024 at 06:06:29PM +0800, jianqi.ren.cn@windriver.com wrote:
> From: Wayne Lin <wayne.lin@amd.com>
> 
> [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]

Please cc: all relevant people on backports.

[PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[jianqi.ren.cn]

From: Wayne Lin <wayne.lin@amd.com>

[ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]

[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.

It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.

[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 1acef5f3838f..a1619f4569cf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
 		dc_sink_release(dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 	}
 
 	aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		dc_sink_release(aconnector->dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 
 		amdgpu_dm_set_mst_status(&aconnector->mst_status,
 			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
-- 
2.25.1

[PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[jianqi.ren.cn]

From: Wayne Lin <wayne.lin@amd.com>

[ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]

[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.

It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.

[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 1acef5f3838f..a1619f4569cf 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
 		dc_sink_release(dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 	}
 
 	aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		dc_sink_release(aconnector->dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 
 		amdgpu_dm_set_mst_status(&aconnector->mst_status,
 			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
-- 
2.25.1

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Sasha Levin]

[ Sasha's backport helper bot ]

Hi,

The upstream commit SHA1 provided is correct: fcf6a49d79923a234844b8efe830a61f3f0584e4

WARNING: Author mismatch between patch and upstream commit:
Backport author: <jianqi.ren.cn@windriver.com>
Commit author: Wayne Lin <wayne.lin@amd.com>


Status in newer kernel trees:
6.12.y | Present (exact SHA1)
6.6.y | Present (different SHA1: c7e65cab54a8)
6.1.y | Not found

Note: The patch differs from the upstream commit:
---
1:  fcf6a49d79923 ! 1:  047f6f4d94ae2 drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
    @@ Metadata
      ## Commit message ##
         drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
     
    +    [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
    +
         [Why]
         When unplug one of monitors connected after mst hub, encounter null pointer dereference.
     
    @@ Commit message
         Signed-off-by: Wayne Lin <wayne.lin@amd.com>
         Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
         Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
    +    Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
     
      ## drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c ##
     @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
    @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: dm_dp_mst_detect(st
      
      		amdgpu_dm_set_mst_status(&aconnector->mst_status,
      			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
    -@@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: static bool is_dsc_need_re_compute(
    - 		if (!aconnector || !aconnector->dsc_aux)
    - 			continue;
    - 
    --		/*
    --		 *	check if cached virtual MST DSC caps are available and DSC is supported
    --		 *	as per specifications in their Virtual DPCD registers.
    --		*/
    --		if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported ||
    --			aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))
    --			continue;
    --
    - 		stream_on_link[new_stream_on_link_num] = aconnector;
    - 		new_stream_on_link_num++;
    - 
---

Results of testing on various branches:

| Branch                    | Patch Apply | Build Test |
|---------------------------|-------------|------------|
| stable/linux-6.1.y        |  Success    |  Success   |

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Sasha Levin]

[ Sasha's backport helper bot ]

Hi,

The upstream commit SHA1 provided is correct: fcf6a49d79923a234844b8efe830a61f3f0584e4

WARNING: Author mismatch between patch and upstream commit:
Backport author: <jianqi.ren.cn@windriver.com>
Commit author: Wayne Lin <wayne.lin@amd.com>


Status in newer kernel trees:
6.12.y | Present (exact SHA1)
6.6.y | Present (different SHA1: c7e65cab54a8)
6.1.y | Not found

Note: The patch differs from the upstream commit:
---
1:  fcf6a49d79923 ! 1:  bb340e15684fc drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
    @@ Metadata
      ## Commit message ##
         drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
     
    +    [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
    +
         [Why]
         When unplug one of monitors connected after mst hub, encounter null pointer dereference.
     
    @@ Commit message
         Signed-off-by: Wayne Lin <wayne.lin@amd.com>
         Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
         Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
    +    Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
     
      ## drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c ##
     @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
    @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: dm_dp_mst_detect(st
      
      		amdgpu_dm_set_mst_status(&aconnector->mst_status,
      			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
    -@@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: static bool is_dsc_need_re_compute(
    - 		if (!aconnector || !aconnector->dsc_aux)
    - 			continue;
    - 
    --		/*
    --		 *	check if cached virtual MST DSC caps are available and DSC is supported
    --		 *	as per specifications in their Virtual DPCD registers.
    --		*/
    --		if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported ||
    --			aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))
    --			continue;
    --
    - 		stream_on_link[new_stream_on_link_num] = aconnector;
    - 		new_stream_on_link_num++;
    - 
---

Results of testing on various branches:

| Branch                    | Patch Apply | Build Test |
|---------------------------|-------------|------------|
| stable/linux-6.1.y        |  Success    |  Success   |

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Greg KH]

On Wed, Dec 11, 2024 at 06:15:44PM +0800, jianqi.ren.cn@windriver.com wrote:
> From: Wayne Lin <wayne.lin@amd.com>
> 
> [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
> 
> [Why]
> When unplug one of monitors connected after mst hub, encounter null pointer dereference.
> 
> It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
> commit new state which directly referring to info stored in dc_sink will cause null pointer
> dereference.
> 
> [how]
> Remove redundant checking condition. Relevant condition should already be covered by checking
> if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.
> 
> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
> Signed-off-by: Wayne Lin <wayne.lin@amd.com>
> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
> ---
>  drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
>  1 file changed, 4 insertions(+)

You sent this 3 times, all different, so I have no idea what to do.

Ok, I give up.  I'm deleting ALL of your pending stable patches from my
review queue now due to all of the problems that these have had.

Please work with a more experienced kernel developer at your company to
get these backports correct, and complete, and send them as a patch
series with the correct information and documentation as to what is
going on, so that we have a chance to get this right.

thanks,

greg k-h

[PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[jianqi.ren.cn]

From: Wayne Lin <wayne.lin@amd.com>

[ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]

[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.

It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.

[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.

Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[The deleted codes in this fix is introduced by commit b9b5a82c5321
("drm/amd/display: Fix DSC-re-computing") after 6.11.]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
---
Verified the build test
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 5eb994ed5471..6bb590bc7c19 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -183,6 +183,8 @@ amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
 		dc_sink_release(dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 	}
 
 	aconnector->mst_status = MST_STATUS_DEFAULT;
@@ -487,6 +489,8 @@ dm_dp_mst_detect(struct drm_connector *connector,
 		dc_sink_release(aconnector->dc_sink);
 		aconnector->dc_sink = NULL;
 		aconnector->edid = NULL;
+		aconnector->dsc_aux = NULL;
+		port->passthrough_aux = NULL;
 
 		amdgpu_dm_set_mst_status(&aconnector->mst_status,
 			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
-- 
2.34.1

Re: [PATCH 6.1.y] drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute

[Sasha Levin]

[ Sasha's backport helper bot ]

Hi,

✅ All tests passed successfully. No issues detected.
No action required from the submitter.

The upstream commit SHA1 provided is correct: fcf6a49d79923a234844b8efe830a61f3f0584e4

WARNING: Author mismatch between patch and upstream commit:
Backport author: <jianqi.ren.cn@windriver.com>
Commit author: Wayne Lin<wayne.lin@amd.com>

Status in newer kernel trees:
6.14.y | Present (exact SHA1)
6.12.y | Present (exact SHA1)
6.6.y | Present (different SHA1: c7e65cab54a8)

Note: The patch differs from the upstream commit:
---
1:  fcf6a49d79923 ! 1:  a758fb74ab9a7 drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
    @@ Metadata
      ## Commit message ##
         drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute
     
    +    [ Upstream commit fcf6a49d79923a234844b8efe830a61f3f0584e4 ]
    +
         [Why]
         When unplug one of monitors connected after mst hub, encounter null pointer dereference.
     
    @@ Commit message
         Signed-off-by: Wayne Lin <wayne.lin@amd.com>
         Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
         Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
    +    [The deleted codes in this fix is introduced by commit b9b5a82c5321
    +    ("drm/amd/display: Fix DSC-re-computing") after 6.11.]
    +    Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
    +    Signed-off-by: He Zhe <zhe.he@windriver.com>
     
      ## drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c ##
     @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: amdgpu_dm_mst_connector_early_unregister(struct drm_connector *connector)
    @@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: dm_dp_mst_detect(st
      
      		amdgpu_dm_set_mst_status(&aconnector->mst_status,
      			MST_REMOTE_EDID | MST_ALLOCATE_NEW_PAYLOAD | MST_CLEAR_ALLOCATED_PAYLOAD,
    -@@ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c: static bool is_dsc_need_re_compute(
    - 		if (!aconnector || !aconnector->dsc_aux)
    - 			continue;
    - 
    --		/*
    --		 *	check if cached virtual MST DSC caps are available and DSC is supported
    --		 *	as per specifications in their Virtual DPCD registers.
    --		*/
    --		if (!(aconnector->dc_sink->dsc_caps.dsc_dec_caps.is_dsc_supported ||
    --			aconnector->dc_link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_PASSTHROUGH_SUPPORT))
    --			continue;
    --
    - 		stream_on_link[new_stream_on_link_num] = aconnector;
    - 		new_stream_on_link_num++;
    - 
---

Results of testing on various branches:

| Branch                    | Patch Apply | Build Test |
|---------------------------|-------------|------------|
| stable/linux-6.1.y        |  Success    |  Success   |