Re: [PATCH 6.1] Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Sat, Jan 18, 2025 at 04:24:09AM -0800, Ron Economos wrote:
> commit 9734fd7a27772016b1f6e31a03258338a219d7d6
> 
> This fixes the build when CONFIG_PM is not set
> 
> Signed-off-by: Ron Economos <re@w6rz.net>
> ---
>  drivers/usb/host/xhci-pci.c | 8 +++++++-
>  include/linux/usb/hcd.h     | 2 ++
>  2 files changed, 9 insertions(+), 1 deletion(-)

<snip>

I've finally been able to reproduce this issue here, and have trimmed
this revert down even more to be the following patch.  I'll go do a new
6.1.y release with just it in now.

thanks,

greg k-h

From: Ron Economos <re@w6rz.net>
Date: Sat, 18 Jan 2025 04:24:09 -0800
Subject: Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, stable@vger.kernel.org
Cc: Pavel Machek <pavel@denx.de>, linux-kernel@vger.kernel.org, Ron Economos <re@w6rz.net>
Message-ID: <20250118122409.4052121-1-re@w6rz.net>

commit 9734fd7a2777 ("xhci: use pm_ptr() instead of #ifdef for CONFIG_PM
conditionals") did not quite work properly in the 6.1.y branch where it was
applied to fix a build error when CONFIG_PM was set as it left the following
build errors still present:

	ERROR: modpost: "xhci_suspend" [drivers/usb/host/xhci-pci.ko] undefined!
	ERROR: modpost: "xhci_resume" [drivers/usb/host/xhci-pci.ko] undefined!

Fix this up by properly placing the #ifdef CONFIG_PM in the xhci-pci.c and
hcd.h files to handle this correctly.

Link: https://lore.kernel.org/r/133dbfa0-4a37-4ae0-bb95-1a35f668ec11@w6rz.net
Signed-off-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/d0919169-ee06-4bdd-b2e3-2f776db90971@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
[ Trimmed the partial revert down to an even smaller bit to only be what
  is required to fix the build error - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -571,6 +571,7 @@ static void xhci_pci_remove(struct pci_d
 		pci_set_power_state(dev, PCI_D3hot);
 }
 
+#ifdef CONFIG_PM
 /*
  * In some Intel xHCI controllers, in order to get D3 working,
  * through a vendor specific SSIC CONFIG register at offset 0x883c,
@@ -720,6 +721,7 @@ static void xhci_pci_shutdown(struct usb
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 		pci_set_power_state(pdev, PCI_D3hot);
 }
+#endif /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
 
@@ -769,9 +771,11 @@ static struct pci_driver xhci_pci_driver
 static int __init xhci_pci_init(void)
 {
 	xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
+#ifdef CONFIG_PM
 	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
 	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
 	xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
+#endif
 	return pci_register_driver(&xhci_pci_driver);
 }
 module_init(xhci_pci_init);