From: <gregkh@linuxfoundation.org>
To: krzysztof.kozlowski@linaro.org,andersson@kernel.org,neil.armstrong@linaro.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] arm64: dts: qcom: sm8450: Fix ADSP memory base and length" failed to apply to 6.6-stable tree
Date: Mon, 10 Feb 2025 15:55:48 +0100 [thread overview]
Message-ID: <2025021048-hacked-audible-e53e@gregkh> (raw)
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 13c96bee5d5e5b61a9d8d000c9bb37bb9a2a0551
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025021048-hacked-audible-e53e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 13c96bee5d5e5b61a9d8d000c9bb37bb9a2a0551 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri, 13 Dec 2024 15:53:53 +0100
Subject: [PATCH] arm64: dts: qcom: sm8450: Fix ADSP memory base and length
The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000, which also matches
downstream DTS. 0x3000_0000, value used so far, was in datasheet is the
region of CDSP.
Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address. The diff looks
big, but only the unit address and "reg" property were changed. This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.
Fixes: 1172729576fb ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241213-dts-qcom-cdsp-mpss-base-address-v3-4-2e0036fccd8d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index fbc3c025e96a..962023331ac4 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2496,6 +2496,112 @@ compute-cb@3 {
};
};
+ remoteproc_adsp: remoteproc@3000000 {
+ compatible = "qcom,sm8450-adsp-pas";
+ reg = <0x0 0x03000000 0x0 0x10000>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x1801 0x0>;
+ };
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1803 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1804 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1805 0x0>;
+ };
+ };
+ };
+ };
+
wsa2macro: codec@31e0000 {
compatible = "qcom,sm8450-lpass-wsa-macro";
reg = <0 0x031e0000 0 0x1000>;
@@ -2692,112 +2798,6 @@ vamacro: codec@33f0000 {
status = "disabled";
};
- remoteproc_adsp: remoteproc@30000000 {
- compatible = "qcom,sm8450-adsp-pas";
- reg = <0 0x30000000 0 0x100>;
-
- interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "xo";
-
- power-domains = <&rpmhpd RPMHPD_LCX>,
- <&rpmhpd RPMHPD_LMX>;
- power-domain-names = "lcx", "lmx";
-
- memory-region = <&adsp_mem>;
-
- qcom,qmp = <&aoss_qmp>;
-
- qcom,smem-states = <&smp2p_adsp_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- remoteproc_adsp_glink: glink-edge {
- interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_LPASS
- IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- label = "lpass";
- qcom,remote-pid = <2>;
-
- gpr {
- compatible = "qcom,gpr";
- qcom,glink-channels = "adsp_apps";
- qcom,domain = <GPR_DOMAIN_ID_ADSP>;
- qcom,intents = <512 20>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- q6apm: service@1 {
- compatible = "qcom,q6apm";
- reg = <GPR_APM_MODULE_IID>;
- #sound-dai-cells = <0>;
- qcom,protection-domain = "avs/audio",
- "msm/adsp/audio_pd";
-
- q6apmdai: dais {
- compatible = "qcom,q6apm-dais";
- iommus = <&apps_smmu 0x1801 0x0>;
- };
-
- q6apmbedai: bedais {
- compatible = "qcom,q6apm-lpass-dais";
- #sound-dai-cells = <1>;
- };
- };
-
- q6prm: service@2 {
- compatible = "qcom,q6prm";
- reg = <GPR_PRM_MODULE_IID>;
- qcom,protection-domain = "avs/audio",
- "msm/adsp/audio_pd";
-
- q6prmcc: clock-controller {
- compatible = "qcom,q6prm-lpass-clocks";
- #clock-cells = <2>;
- };
- };
- };
-
- fastrpc {
- compatible = "qcom,fastrpc";
- qcom,glink-channels = "fastrpcglink-apps-dsp";
- label = "adsp";
- qcom,non-secure-domain;
- #address-cells = <1>;
- #size-cells = <0>;
-
- compute-cb@3 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <3>;
- iommus = <&apps_smmu 0x1803 0x0>;
- };
-
- compute-cb@4 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <4>;
- iommus = <&apps_smmu 0x1804 0x0>;
- };
-
- compute-cb@5 {
- compatible = "qcom,fastrpc-compute-cb";
- reg = <5>;
- iommus = <&apps_smmu 0x1805 0x0>;
- };
- };
- };
- };
-
remoteproc_cdsp: remoteproc@32300000 {
compatible = "qcom,sm8450-cdsp-pas";
reg = <0 0x32300000 0 0x1400000>;
reply other threads:[~2025-02-10 14:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025021048-hacked-audible-e53e@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=andersson@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=neil.armstrong@linaro.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox