From: <gregkh@linuxfoundation.org>
To: richard.weiyang@gmail.com,Liam.Howlett@Oracle.com,akpm@linux-foundation.org,lorenzo.stoakes@oracle.com,sidhartha.kumar@oracle.com,stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] maple_tree: simplify split calculation" failed to apply to 6.1-stable tree
Date: Tue, 11 Feb 2025 10:48:28 +0100 [thread overview]
Message-ID: <2025021128-repeater-percolate-6131@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 4f6a6bed0bfef4b966f076f33eb4f5547226056a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025021128-repeater-percolate-6131@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 4f6a6bed0bfef4b966f076f33eb4f5547226056a Mon Sep 17 00:00:00 2001
From: Wei Yang <richard.weiyang@gmail.com>
Date: Wed, 13 Nov 2024 03:16:14 +0000
Subject: [PATCH] maple_tree: simplify split calculation
Patch series "simplify split calculation", v3.
This patch (of 3):
The current calculation for splitting nodes tries to enforce a minimum
span on the leaf nodes. This code is complex and never worked correctly
to begin with, due to the min value being passed as 0 for all leaves.
The calculation should just split the data as equally as possible
between the new nodes. Note that b_end will be one more than the data,
so the left side is still favoured in the calculation.
The current code may also lead to a deficient node by not leaving enough
data for the right side of the split. This issue is also addressed with
the split calculation change.
[Liam.Howlett@Oracle.com: rephrase the change log]
Link: https://lkml.kernel.org/r/20241113031616.10530-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20241113031616.10530-2-richard.weiyang@gmail.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/lib/maple_tree.c b/lib/maple_tree.c
index fe7f9e1f5bbb..ca8ae1e1cc0a 100644
--- a/lib/maple_tree.c
+++ b/lib/maple_tree.c
@@ -1863,11 +1863,11 @@ static inline int mab_no_null_split(struct maple_big_node *b_node,
* Return: The first split location. The middle split is set in @mid_split.
*/
static inline int mab_calc_split(struct ma_state *mas,
- struct maple_big_node *bn, unsigned char *mid_split, unsigned long min)
+ struct maple_big_node *bn, unsigned char *mid_split)
{
unsigned char b_end = bn->b_end;
int split = b_end / 2; /* Assume equal split. */
- unsigned char slot_min, slot_count = mt_slots[bn->type];
+ unsigned char slot_count = mt_slots[bn->type];
/*
* To support gap tracking, all NULL entries are kept together and a node cannot
@@ -1900,18 +1900,7 @@ static inline int mab_calc_split(struct ma_state *mas,
split = b_end / 3;
*mid_split = split * 2;
} else {
- slot_min = mt_min_slots[bn->type];
-
*mid_split = 0;
- /*
- * Avoid having a range less than the slot count unless it
- * causes one node to be deficient.
- * NOTE: mt_min_slots is 1 based, b_end and split are zero.
- */
- while ((split < slot_count - 1) &&
- ((bn->pivot[split] - min) < slot_count - 1) &&
- (b_end - split > slot_min))
- split++;
}
/* Avoid ending a node on a NULL entry */
@@ -2377,7 +2366,7 @@ static inline struct maple_enode
static inline unsigned char mas_mab_to_node(struct ma_state *mas,
struct maple_big_node *b_node, struct maple_enode **left,
struct maple_enode **right, struct maple_enode **middle,
- unsigned char *mid_split, unsigned long min)
+ unsigned char *mid_split)
{
unsigned char split = 0;
unsigned char slot_count = mt_slots[b_node->type];
@@ -2390,7 +2379,7 @@ static inline unsigned char mas_mab_to_node(struct ma_state *mas,
if (b_node->b_end < slot_count) {
split = b_node->b_end;
} else {
- split = mab_calc_split(mas, b_node, mid_split, min);
+ split = mab_calc_split(mas, b_node, mid_split);
*right = mas_new_ma_node(mas, b_node);
}
@@ -2877,7 +2866,7 @@ static void mas_spanning_rebalance(struct ma_state *mas,
mast->bn->b_end--;
mast->bn->type = mte_node_type(mast->orig_l->node);
split = mas_mab_to_node(mas, mast->bn, &left, &right, &middle,
- &mid_split, mast->orig_l->min);
+ &mid_split);
mast_set_split_parents(mast, left, middle, right, split,
mid_split);
mast_cp_to_nodes(mast, left, middle, right, split, mid_split);
@@ -3365,7 +3354,7 @@ static void mas_split(struct ma_state *mas, struct maple_big_node *b_node)
if (mas_push_data(mas, height, &mast, false))
break;
- split = mab_calc_split(mas, b_node, &mid_split, prev_l_mas.min);
+ split = mab_calc_split(mas, b_node, &mid_split);
mast_split_data(&mast, mas, split);
/*
* Usually correct, mab_mas_cp in the above call overwrites
next reply other threads:[~2025-02-11 9:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-11 9:48 gregkh [this message]
2025-02-11 14:03 ` FAILED: patch "[PATCH] maple_tree: simplify split calculation" failed to apply to 6.1-stable tree Wei Yang
2025-02-13 13:10 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025021128-repeater-percolate-6131@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Liam.Howlett@Oracle.com \
--cc=akpm@linux-foundation.org \
--cc=lorenzo.stoakes@oracle.com \
--cc=richard.weiyang@gmail.com \
--cc=sidhartha.kumar@oracle.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox