Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: johan.korsnes@remarkable.no,bartosz.golaszewski@linaro.org,brgl@bgdev.pl,haibo.chen@nxp.com,linus.walleij@linaro.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] gpio: vf610: add locking to gpio direction functions" failed to apply to 6.1-stable tree
Date: Mon, 24 Feb 2025 11:28:10 +0100	[thread overview]
Message-ID: <2025022410-prior-trilogy-94b8@gregkh> (raw)


The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 4e667a1968099c6deadee2313ecd648f8f0a8956
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025022410-prior-trilogy-94b8@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 4e667a1968099c6deadee2313ecd648f8f0a8956 Mon Sep 17 00:00:00 2001
From: Johan Korsnes <johan.korsnes@remarkable.no>
Date: Mon, 17 Feb 2025 10:16:43 +0100
Subject: [PATCH] gpio: vf610: add locking to gpio direction functions

Add locking to `vf610_gpio_direction_input|output()` functions. Without
this locking, a race condition exists between concurrent calls to these
functions, potentially leading to incorrect GPIO direction settings.

To verify the correctness of this fix, a `trylock` patch was applied,
where after a couple of reboots the race was confirmed. I.e., one user
had to wait before acquiring the lock. With this patch the race has not
been encountered. It's worth mentioning that any type of debugging
(printing, tracing, etc.) would "resolve"/hide the issue.

Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250217091643.679644-1-johan.korsnes@remarkable.no
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index c4f34a347cb6..c36a9dbccd4d 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -36,6 +36,7 @@ struct vf610_gpio_port {
 	struct clk *clk_port;
 	struct clk *clk_gpio;
 	int irq;
+	spinlock_t lock; /* protect gpio direction registers */
 };
 
 #define GPIO_PDOR		0x00
@@ -124,6 +125,7 @@ static int vf610_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
 	u32 val;
 
 	if (port->sdata->have_paddr) {
+		guard(spinlock_irqsave)(&port->lock);
 		val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
 		val &= ~mask;
 		vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
@@ -142,6 +144,7 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio
 	vf610_gpio_set(chip, gpio, value);
 
 	if (port->sdata->have_paddr) {
+		guard(spinlock_irqsave)(&port->lock);
 		val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
 		val |= mask;
 		vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
@@ -297,6 +300,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	port->sdata = device_get_match_data(dev);
+	spin_lock_init(&port->lock);
 
 	dual_base = port->sdata->have_dual_base;
 


                 reply	other threads:[~2025-02-24 10:28 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2025022410-prior-trilogy-94b8@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=brgl@bgdev.pl \
    --cc=haibo.chen@nxp.com \
    --cc=johan.korsnes@remarkable.no \
    --cc=linus.walleij@linaro.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox