From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,willy@infradead.org,v-songbaohua@oppo.com,stable@vger.kernel.org,peterx@redhat.com,lorenzo.stoakes@oracle.com,lokeshgidra@google.com,Liam.Howlett@Oracle.com,kaleshsingh@google.com,jannh@google.com,hughd@google.com,david@redhat.com,aarcange@redhat.com,21cnbao@gmail.com,surenb@google.com,akpm@linux-foundation.org
Subject: + userfaultfd-fix-pte-unmapping-stack-allocated-pte-copies.patch added to mm-hotfixes-unstable branch
Date: Wed, 26 Feb 2025 13:32:14 -0800 [thread overview]
Message-ID: <20250226213214.EF780C4CEE9@smtp.kernel.org> (raw)
The patch titled
Subject: userfaultfd: fix PTE unmapping stack-allocated PTE copies
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
userfaultfd-fix-pte-unmapping-stack-allocated-pte-copies.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/userfaultfd-fix-pte-unmapping-stack-allocated-pte-copies.patch
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: Suren Baghdasaryan <surenb@google.com>
Subject: userfaultfd: fix PTE unmapping stack-allocated PTE copies
Date: Wed, 26 Feb 2025 10:55:09 -0800
Current implementation of move_pages_pte() copies source and destination
PTEs in order to detect concurrent changes to PTEs involved in the move.
However these copies are also used to unmap the PTEs, which will fail if
CONFIG_HIGHPTE is enabled because the copies are allocated on the stack.
Fix this by using the actual PTEs which were kmap()ed.
Link: https://lkml.kernel.org/r/20250226185510.2732648-3-surenb@google.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/userfaultfd.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/mm/userfaultfd.c~userfaultfd-fix-pte-unmapping-stack-allocated-pte-copies
+++ a/mm/userfaultfd.c
@@ -1290,8 +1290,8 @@ retry:
spin_unlock(src_ptl);
if (!locked) {
- pte_unmap(&orig_src_pte);
- pte_unmap(&orig_dst_pte);
+ pte_unmap(src_pte);
+ pte_unmap(dst_pte);
src_pte = dst_pte = NULL;
/* now we can block and wait */
folio_lock(src_folio);
@@ -1307,8 +1307,8 @@ retry:
/* at this point we have src_folio locked */
if (folio_test_large(src_folio)) {
/* split_folio() can block */
- pte_unmap(&orig_src_pte);
- pte_unmap(&orig_dst_pte);
+ pte_unmap(src_pte);
+ pte_unmap(dst_pte);
src_pte = dst_pte = NULL;
err = split_folio(src_folio);
if (err)
@@ -1333,8 +1333,8 @@ retry:
goto out;
}
if (!anon_vma_trylock_write(src_anon_vma)) {
- pte_unmap(&orig_src_pte);
- pte_unmap(&orig_dst_pte);
+ pte_unmap(src_pte);
+ pte_unmap(dst_pte);
src_pte = dst_pte = NULL;
/* now we can block and wait */
anon_vma_lock_write(src_anon_vma);
@@ -1352,8 +1352,8 @@ retry:
entry = pte_to_swp_entry(orig_src_pte);
if (non_swap_entry(entry)) {
if (is_migration_entry(entry)) {
- pte_unmap(&orig_src_pte);
- pte_unmap(&orig_dst_pte);
+ pte_unmap(src_pte);
+ pte_unmap(dst_pte);
src_pte = dst_pte = NULL;
migration_entry_wait(mm, src_pmd, src_addr);
err = -EAGAIN;
@@ -1396,8 +1396,8 @@ retry:
src_folio = folio;
src_folio_pte = orig_src_pte;
if (!folio_trylock(src_folio)) {
- pte_unmap(&orig_src_pte);
- pte_unmap(&orig_dst_pte);
+ pte_unmap(src_pte);
+ pte_unmap(dst_pte);
src_pte = dst_pte = NULL;
/* now we can block and wait */
folio_lock(src_folio);
_
Patches currently in -mm which might be from surenb@google.com are
userfaultfd-do-not-block-on-locking-a-large-folio-with-raised-refcount.patch
userfaultfd-fix-pte-unmapping-stack-allocated-pte-copies.patch
mm-avoid-extra-mem_alloc_profiling_enabled-checks.patch
alloc_tag-uninline-code-gated-by-mem_alloc_profiling_key-in-slab-allocator.patch
alloc_tag-uninline-code-gated-by-mem_alloc_profiling_key-in-page-allocator.patch
mm-introduce-vma_start_read_locked_nested-helpers.patch
mm-move-per-vma-lock-into-vm_area_struct.patch
mm-mark-vma-as-detached-until-its-added-into-vma-tree.patch
mm-introduce-vma_iter_store_attached-to-use-with-attached-vmas.patch
mm-mark-vmas-detached-upon-exit.patch
types-move-struct-rcuwait-into-typesh.patch
mm-allow-vma_start_read_locked-vma_start_read_locked_nested-to-fail.patch
mm-move-mmap_init_lock-out-of-the-header-file.patch
mm-uninline-the-main-body-of-vma_start_write.patch
refcount-provide-ops-for-cases-when-objects-memory-can-be-reused.patch
refcount-provide-ops-for-cases-when-objects-memory-can-be-reused-fix.patch
refcount-introduce-__refcount_addinc_not_zero_limited_acquire.patch
mm-replace-vm_lock-and-detached-flag-with-a-reference-count.patch
mm-replace-vm_lock-and-detached-flag-with-a-reference-count-fix.patch
mm-move-lesser-used-vma_area_struct-members-into-the-last-cacheline.patch
mm-debug-print-vm_refcnt-state-when-dumping-the-vma.patch
mm-remove-extra-vma_numab_state_init-call.patch
mm-prepare-lock_vma_under_rcu-for-vma-reuse-possibility.patch
mm-make-vma-cache-slab_typesafe_by_rcu.patch
mm-make-vma-cache-slab_typesafe_by_rcu-fix.patch
docs-mm-document-latest-changes-to-vm_lock.patch
reply other threads:[~2025-02-26 21:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250226213214.EF780C4CEE9@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=21cnbao@gmail.com \
--cc=Liam.Howlett@Oracle.com \
--cc=aarcange@redhat.com \
--cc=david@redhat.com \
--cc=hughd@google.com \
--cc=jannh@google.com \
--cc=kaleshsingh@google.com \
--cc=lokeshgidra@google.com \
--cc=lorenzo.stoakes@oracle.com \
--cc=mm-commits@vger.kernel.org \
--cc=peterx@redhat.com \
--cc=stable@vger.kernel.org \
--cc=surenb@google.com \
--cc=v-songbaohua@oppo.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox