[PATCH 6.6 000/166] 6.6.84-rc1 review

[PATCH 6.6 000/166] 6.6.84-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.6.84 release.
There are 166 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.6.84-rc1

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: allow clone callbacks to sleep

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: bail out if stateful expression provides no .clone

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: use timestamp to check for set element timeout

Mitchell Levy <levymitchell0@gmail.com>
    rust: lockdep: Remove support for dynamically allocated LockClassKeys

Maurizio Lombardi <mlombard@redhat.com>
    nvme-tcp: Fix a C2HTermReq error message

Alex Henrie <alexhenrie24@gmail.com>
    HID: apple: disable Fn key handling on the Omoton KB066

Daniel Wagner <wagi@kernel.org>
    nvme-fc: rely on state transitions to handle connectivity loss

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix corrupted list in hci_chan_del

Henrique Carvalho <henrique.carvalho@suse.com>
    smb: client: Fix match_session bug preventing session reuse

Steve French <stfrench@microsoft.com>
    smb3: add support for IAKerb

Philipp Stanner <phasta@kernel.org>
    stmmac: loongson: Pass correct arg to PCI function

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    i2c: sis630: Fix an error handling path in sis630_probe()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    i2c: ali15x3: Fix an error handling path in ali15x3_probe()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    i2c: ali1535: Fix an error handling path in ali1535_probe()

Pali Rohár <pali@kernel.org>
    cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()

Pali Rohár <pali@kernel.org>
    cifs: Validate content of WSL reparse point buffers

Murad Masimov <m.masimov@mt-integration.ru>
    cifs: Fix integer overflow while processing closetimeo mount option

Murad Masimov <m.masimov@mt-integration.ru>
    cifs: Fix integer overflow while processing actimeo mount option

Murad Masimov <m.masimov@mt-integration.ru>
    cifs: Fix integer overflow while processing acdirmax mount option

Murad Masimov <m.masimov@mt-integration.ru>
    cifs: Fix integer overflow while processing acregmax mount option

Tamir Duberstein <tamird@gmail.com>
    scripts: generate_rust_analyzer: add missing macros deps

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()

Bard Liao <yung-chuan.liao@linux.intel.com>
    ASoC: rt722-sdca: add missing readable registers

Alban Kurti <kurti@invicto.ai>
    rust: init: add missing newline to pr_info! calls

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: cs42l43: Fix maximum ADC Volume

Ivan Abramov <i.abramov@mt-integration.ru>
    drm/gma500: Add NULL check for pci_gfx_root in mid_get_vbt_data()

Alban Kurti <kurti@invicto.ai>
    rust: error: add missing newline to pr_warn! calls

Charles Keepax <ckeepax@opensource.cirrus.com>
    ASoC: ops: Consistently treat platform_max as control value

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    mm: split critical region in remap_file_pages() and invoke LSMs in between

Andrii Nakryiko <andrii@kernel.org>
    lib/buildid: Handle memfd_secret() files in build_id_parse()

Benno Lossin <benno.lossin@proton.me>
    rust: init: fix `Zeroable` implementation for `Option<NonNull<T>>` and `Option<KBox<T>>`

Matthew Maurer <mmaurer@google.com>
    rust: Disallow BTF generation with Rust + LTO

Paulo Alcantara <pc@manguebit.com>
    smb: client: fix regression with guest option

Haoxiang Li <haoxiang_li2024@163.com>
    qlcnic: fix memory leak issues in qlcnic_sriov_common.c

Zhenhua Huang <quic_zhenhuah@quicinc.com>
    arm64: mm: Populate vmemmap at the page level if not section aligned

Kent Overstreet <kent.overstreet@linux.dev>
    dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature

Thomas Mizrahi <thomasmizra@gmail.com>
    ASoC: amd: yc: Support mic on another Lenovo ThinkPad E16 Gen 2 model

Varada Pavani <v.pavani@samsung.com>
    clk: samsung: update PLL locktime for PLL142XX used on FSD platform

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: prevent connection release during oplock break notification

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: fix use-after-free in ksmbd_free_work_struct

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd/display: Fix slab-use-after-free on hdcp_work

Alex Hung <alex.hung@amd.com>
    drm/amd/display: Assign normalized_pix_clk when color depth = 14

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd/display: Restore correct backlight brightness after a GPU reset

Leo Li <sunpeng.li@amd.com>
    drm/amd/display: Disable unneeded hpd interrupts during dm_init

Imre Deak <imre.deak@intel.com>
    drm/dp_mst: Fix locking when skipping CSN before topology probing

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/atomic: Filter out redundant DPMS calls

Ville Syrjälä <ville.syrjala@linux.intel.com>
    drm/i915/cdclk: Do cdclk post plane programming later

Florent Revest <revest@chromium.org>
    x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes

Johan Hovold <johan@kernel.org>
    USB: serial: option: match on interface class for Telit FN990B

Fabio Porcedda <fabio.porcedda@gmail.com>
    USB: serial: option: fix Telit Cinterion FE990A name

Fabio Porcedda <fabio.porcedda@gmail.com>
    USB: serial: option: add Telit Cinterion FE990B compositions

Boon Khai Ng <boon.khai.ng@intel.com>
    USB: serial: ftdi_sio: add support for Altera USB Blaster 3

Werner Sembach <wse@tuxedocomputers.com>
    Input: i8042 - swap old quirk combination with new quirk for more devices

Werner Sembach <wse@tuxedocomputers.com>
    Input: i8042 - swap old quirk combination with new quirk for several devices

Werner Sembach <wse@tuxedocomputers.com>
    Input: i8042 - add required quirks for missing old boardnames

Werner Sembach <wse@tuxedocomputers.com>
    Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ

Antheas Kapenekakis <lkml@antheas.dev>
    Input: xpad - rename QH controller to Legion Go S

Antheas Kapenekakis <lkml@antheas.dev>
    Input: xpad - add support for TECNO Pocket Go

Antheas Kapenekakis <lkml@antheas.dev>
    Input: xpad - add support for ZOTAC Gaming Zone

Pavel Rojtberg <rojtberg@gmail.com>
    Input: xpad - add multiple supported devices

Nilton Perim Neto <niltonperimneto@gmail.com>
    Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers

Jeff LaBundy <jeff@labundy.com>
    Input: iqs7222 - preserve system status register

H. Nikolaus Schaller <hns@goldelico.com>
    Input: ads7846 - fix gpiod allocation

Pavel Begunkov <asml.silence@gmail.com>
    io_uring: fix error pbuf checking

Jens Axboe <axboe@kernel.dk>
    io_uring: use unpin_user_pages() where appropriate

Jens Axboe <axboe@kernel.dk>
    io_uring/kbuf: use vm_insert_pages() for mmap'ed pbuf ring

Jens Axboe <axboe@kernel.dk>
    io_uring/kbuf: vmap pinned buffer ring

Jens Axboe <axboe@kernel.dk>
    io_uring: unify io_pin_pages()

Jens Axboe <axboe@kernel.dk>
    io_uring: use vmap() for ring mapping

Pavel Begunkov <asml.silence@gmail.com>
    io_uring: fix corner case forgetting to vunmap

Jens Axboe <axboe@kernel.dk>
    io_uring: don't attempt to mmap larger than what the user asks for

Jens Axboe <axboe@kernel.dk>
    io_uring: get rid of remap_pfn_range() for mapping rings/sqes

Jens Axboe <axboe@kernel.dk>
    mm: add nommu variant of vm_insert_pages()

Ming Lei <ming.lei@redhat.com>
    block: fix 'kmem_cache of name 'bio-108' already exists'

Frederic Weisbecker <frederic@kernel.org>
    net: Handle napi_schedule() calls from non-interrupt

Thomas Zimmermann <tzimmermann@suse.de>
    drm/nouveau: Do not override forced connector status

Matthieu Baerts (NGI0) <matttbe@kernel.org>
    mptcp: safety check before fallback

Arnd Bergmann <arnd@arndb.de>
    x86/irq: Define trace events conditionally

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel: Use better start period for frequency mode

Harry Wentland <harry.wentland@amd.com>
    drm/vkms: Round fixp2int conversion in lerp_u16

Miklos Szeredi <mszeredi@redhat.com>
    fuse: don't truncate cached, mutated symlink

Hector Martin <marcan@marcan.st>
    ASoC: tas2764: Set the SDOUT polarity correctly

Hector Martin <marcan@marcan.st>
    ASoC: tas2764: Fix power control mask

Hector Martin <marcan@marcan.st>
    ASoC: tas2770: Fix volume scale

Daniel Wagner <wagi@kernel.org>
    nvme: only allow entering LIVE from CONNECTING state

Yu-Chun Lin <eleanor15x@gmail.com>
    sctp: Fix undefined behavior in left shift operation

Pali Rohár <pali@kernel.org>
    cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes

Hector Martin <marcan@marcan.st>
    apple-nvme: Release power domains when probe fails

Ruozhu Li <david.li@jaguarmicro.com>
    nvmet-rdma: recheck queue state is LIVE in state lock in recv done

Maurizio Lombardi <mlombard@redhat.com>
    nvme-tcp: add basic support for the C2HTermReq PDU

Christopher Lentocha <christopherericlentocha@gmail.com>
    nvme-pci: quirk Acer FA100 for non-uniqueue identifiers

Uday Shankar <ushankar@purestorage.com>
    io-wq: backoff when retrying worker creation

Stephan Gerhold <stephan.gerhold@linaro.org>
    net: wwan: mhi_wwan_mbim: Silence sequence number glitch errors

Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
    ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE

Terry Cheong <htcheong@chromium.org>
    ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module

Vitaly Rodionov <vitalyr@opensource.cirrus.com>
    ASoC: arizona/madera: use fsleep() in up/down DAPM event delays.

Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    ASoC: rsnd: adjust convert rate limitation

Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    ASoC: rsnd: don't indicate warning on rsnd_kctrl_accept_runtime()

Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    ASoC: rsnd: indicate unsupported clock rate

Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
    ALSA: hda/realtek: Limit mic boost on Positivo ARN50

Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    ASoC: simple-card-utils.c: add missing dlc->of_node

Jiayuan Chen <mrpre@163.com>
    selftests/bpf: Fix invalid flag of recv()

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd

Jan Beulich <jbeulich@suse.com>
    Xen/swiotlb: mark xen_swiotlb_fixup() __init

Daniel Lezcano <daniel.lezcano@linaro.org>
    thermal/cpufreq_cooling: Remove structure member documentation

Peter Oberparleiter <oberpar@linux.ibm.com>
    s390/cio: Fix CHPID "configure" attribute caching

Mark Pearson <mpearson-lenovo@squebb.ca>
    platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles

Sybil Isabel Dorsett <sybdorsett@proton.me>
    platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e

Jann Horn <jannh@google.com>
    sched: Clarify wake_up_q()'s write to task->wake_q.next

Josh Poimboeuf <jpoimboe@kernel.org>
    objtool: Ignore dangling jump table entries

Alex Henrie <alexhenrie24@gmail.com>
    HID: apple: fix up the F6 key on the Omoton KB066 keyboard

Ievgen Vovk <YevgenVovk@ukr.net>
    HID: hid-apple: Apple Magic Keyboard a3203 USB-C support

Daniel Brackenbury <daniel.brackenbury@gmail.com>
    HID: topre: Fix n-key rollover on Realforce R3S TKL boards

Alexander Stein <alexander.stein@ew.tq-group.com>
    usb: phy: generic: Use proper helper for property detection

Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
    HID: ignore non-functional sensor in HP 5MP Camera

Zhang Lixu <lixu.zhang@intel.com>
    HID: intel-ish-hid: Send clock sync message immediately after reset

Zhang Lixu <lixu.zhang@intel.com>
    HID: intel-ish-hid: fix the length of MNG_SYNC_FW_CLOCK in doorbell

Brahmajit Das <brahmajit.xyz@gmail.com>
    vboxsf: fix building with GCC 15

Eric W. Biederman <ebiederm@xmission.com>
    alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support

Paulo Alcantara <pc@manguebit.com>
    smb: client: fix noisy when tree connecting to DFS interlink targets

Gannon Kolding <gannon.kolding@gmail.com>
    ACPI: resource: IRQ override for Eluktronics MECH-17

Magnus Lindholm <linmag7@gmail.com>
    scsi: qla1280: Fix kernel oops when debug level > 2

Seunghui Lee <sh043.lee@samsung.com>
    scsi: ufs: core: Fix error return with query response

Rik van Riel <riel@surriel.com>
    scsi: core: Use GFP_NOIO to avoid circular locking dependency

Dmitry Kandybka <d.kandybka@gmail.com>
    platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()

Christian Loehle <christian.loehle@arm.com>
    sched/debug: Provide slice length for fair tasks

Chengen Du <chengen.du@canonical.com>
    iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()

Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
    powercap: call put_device() on an error path in powercap_register_control_type()

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    hrtimers: Mark is_migration_base() with __always_inline

Daniel Wagner <wagi@kernel.org>
    nvme-fc: do not ignore connectivity loss during connecting

Daniel Wagner <wagi@kernel.org>
    nvme-fc: go straight to connecting state when initializing

Carolina Jubran <cjubran@nvidia.com>
    net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices

Jianbo Liu <jianbol@nvidia.com>
    net/mlx5: Bridge, fix the crash caused by LAG state check

Shay Drory <shayd@nvidia.com>
    net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch

Ilya Maximets <i.maximets@ovn.org>
    net: openvswitch: remove misbehaving actions length check

Guillaume Nault <gnault@redhat.com>
    gre: Fix IPv6 link-local address generation.

Alexey Kashavkin <akashavkin@gmail.com>
    netfilter: nft_exthdr: fix offset with ipv4_find_option()

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: Prevent creation of classes with TC_H_ROOT

Dan Carpenter <dan.carpenter@linaro.org>
    ipvs: prevent integer overflow in do_ip_vs_get_ctl()

Kohei Enju <enjuk@amazon.com>
    netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()

Hangbin Liu <liuhangbin@gmail.com>
    bonding: fix incorrect MAC address setting to receive NS messages

Amit Cohen <amcohen@nvidia.com>
    net: switchdev: Convert blocking notification chain to a raw one

Taehee Yoo <ap420073@gmail.com>
    eth: bnxt: do not update checksum in bnxt_xdp_build_skb()

Wentao Liang <vulab@iscas.ac.cn>
    net/mlx5: handle errors in mlx5_chains_create_table()

Michael Kelley <mhklinux@outlook.com>
    Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio()

Michael Kelley <mhklinux@outlook.com>
    drm/hyperv: Fix address space leak when Hyper-V DRM device is removed

Breno Leitao <leitao@debian.org>
    netpoll: hold rcu read lock in __netpoll_send_skb()

Matt Johnston <matt@codeconstruct.com.au>
    net: mctp i2c: Copy headers if cloned

Joseph Huang <Joseph.Huang@garmin.com>
    net: dsa: mv88e6xxx: Verify after ATU Load ops

Jiri Pirko <jiri@resnulli.us>
    net/mlx5: Fill out devlink dev info only for PFs

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Revert "Bluetooth: hci_core: Fix sleeping function called from invalid context"

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_event: Fix enabling passive scanning

Miri Korenblit <miriam.rachel.korenblit@intel.com>
    wifi: cfg80211: cancel wiphy_work before freeing wiphy

Jun Yang <juny24602@gmail.com>
    sched: address a potential NULL pointer dereference in the GRED scheduler.

Nicklas Bo Jensen <njensen@akamai.com>
    netfilter: nf_conncount: garbage collection is not skipped when jiffies wrap around

Grzegorz Nitka <grzegorz.nitka@intel.com>
    ice: fix memory leak in aRFS after reset

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.

Artur Weber <aweber.kernel@gmail.com>
    pinctrl: bcm281xx: Fix incorrect regmap max_registers value

Michael Kelley <mhklinux@outlook.com>
    fbdev: hyperv_fb: iounmap() the correct memory when removing a device

Xueming Feng <kuro@kuroa.me>
    tcp: fix forever orphan socket caused by tcp_abort

Eric Dumazet <edumazet@google.com>
    tcp: fix races in tcp_abort()

Wander Lairson Costa <wander.lairson@gmail.com>
    bpf: Use raw_spinlock_t in ringbuf

Felix Moessbauer <felix.moessbauer@siemens.com>
    hrtimer: Use and report correct timerslack values for realtime tasks

Liu Shixin <liushixin2@huawei.com>
    zram: fix NULL pointer in comp_algorithm_show()

Oleg Nesterov <oleg@redhat.com>
    sched/isolation: Prevent boot crash when the boot CPU is nohz_full

David Woodhouse <dwmw@amazon.co.uk>
    clockevents/drivers/i8253: Fix stop sequence for timer 0


-------------

Diffstat:

 Documentation/timers/no_hz.rst                     |   7 +-
 Makefile                                           |   4 +-
 arch/alpha/include/asm/elf.h                       |   6 +-
 arch/alpha/include/asm/pgtable.h                   |   2 +-
 arch/alpha/include/asm/processor.h                 |   8 +-
 arch/alpha/kernel/osf_sys.c                        |  11 +-
 arch/arm64/mm/mmu.c                                |   5 +-
 arch/x86/events/intel/core.c                       |  85 +++++++
 arch/x86/kernel/cpu/microcode/amd.c                |   2 +-
 arch/x86/kernel/cpu/mshyperv.c                     |  11 -
 arch/x86/kernel/irq.c                              |   2 +
 block/bio.c                                        |   2 +-
 drivers/acpi/resource.c                            |   6 +
 drivers/block/zram/zram_drv.c                      |   4 +-
 drivers/clk/samsung/clk-pll.c                      |   7 +-
 drivers/clocksource/i8253.c                        |  36 ++-
 drivers/firmware/iscsi_ibft.c                      |   5 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  10 +
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c |   1 +
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c  |  64 ++++--
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c  |   7 +-
 drivers/gpu/drm/display/drm_dp_mst_topology.c      |  40 ++--
 drivers/gpu/drm/drm_atomic_uapi.c                  |   4 +
 drivers/gpu/drm/drm_connector.c                    |   4 +
 drivers/gpu/drm/gma500/mid_bios.c                  |   5 +
 drivers/gpu/drm/hyperv/hyperv_drm_drv.c            |   2 +
 drivers/gpu/drm/i915/display/intel_display.c       |   5 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c        |   1 -
 drivers/gpu/drm/vkms/vkms_composer.c               |   2 +-
 drivers/hid/Kconfig                                |   3 +-
 drivers/hid/hid-apple.c                            |  13 +-
 drivers/hid/hid-ids.h                              |   3 +
 drivers/hid/hid-quirks.c                           |   1 +
 drivers/hid/hid-topre.c                            |   7 +
 drivers/hid/intel-ish-hid/ipc/ipc.c                |  15 +-
 drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h        |   2 +
 drivers/hv/vmbus_drv.c                             |  13 ++
 drivers/i2c/busses/i2c-ali1535.c                   |  12 +-
 drivers/i2c/busses/i2c-ali15x3.c                   |  12 +-
 drivers/i2c/busses/i2c-sis630.c                    |  12 +-
 drivers/input/joystick/xpad.c                      |  39 +++-
 drivers/input/misc/iqs7222.c                       |  50 ++--
 drivers/input/serio/i8042-acpipnpio.h              | 111 +++++----
 drivers/input/touchscreen/ads7846.c                |   2 +-
 drivers/md/dm-flakey.c                             |   2 +-
 drivers/net/bonding/bond_options.c                 |  55 ++++-
 drivers/net/dsa/mv88e6xxx/chip.c                   |  59 ++++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |   3 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c      |  11 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h      |   3 +-
 drivers/net/ethernet/intel/ice/ice_arfs.c          |   2 +-
 drivers/net/ethernet/mellanox/mlx5/core/devlink.c  |   3 +
 .../ethernet/mellanox/mlx5/core/en/rep/bridge.c    |  12 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |   6 +-
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c  |   4 +-
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h  |   1 +
 .../net/ethernet/mellanox/mlx5/core/lag/mpesw.c    |   3 +-
 .../ethernet/mellanox/mlx5/core/lib/fs_chains.c    |   5 +
 .../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c   |   8 +-
 .../net/ethernet/stmicro/stmmac/dwmac-loongson.c   |   7 +-
 drivers/net/mctp/mctp-i2c.c                        |   5 +
 drivers/net/wwan/mhi_wwan_mbim.c                   |   2 +-
 drivers/nvme/host/apple.c                          |   2 +
 drivers/nvme/host/core.c                           |   2 -
 drivers/nvme/host/fc.c                             |  59 +----
 drivers/nvme/host/pci.c                            |   2 +
 drivers/nvme/host/tcp.c                            |  43 ++++
 drivers/nvme/target/rdma.c                         |  33 ++-
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c             |   2 +-
 drivers/platform/x86/intel/pmc/core.c              |   4 +-
 drivers/platform/x86/thinkpad_acpi.c               |  50 ++--
 drivers/powercap/powercap_sys.c                    |   3 +-
 drivers/s390/cio/chp.c                             |   3 +-
 drivers/scsi/qla1280.c                             |   2 +-
 drivers/scsi/scsi_scan.c                           |   2 +-
 drivers/thermal/cpufreq_cooling.c                  |   2 -
 drivers/ufs/core/ufshcd.c                          |   7 +-
 drivers/usb/phy/phy-generic.c                      |   2 +-
 drivers/usb/serial/ftdi_sio.c                      |  14 ++
 drivers/usb/serial/ftdi_sio_ids.h                  |  13 ++
 drivers/usb/serial/option.c                        |  48 ++--
 drivers/video/fbdev/hyperv_fb.c                    |   2 +-
 drivers/xen/swiotlb-xen.c                          |   2 +-
 fs/fuse/dir.c                                      |   2 +-
 fs/namei.c                                         |  24 +-
 fs/proc/base.c                                     |   9 +-
 fs/select.c                                        |  11 +-
 fs/smb/client/asn1.c                               |   2 +
 fs/smb/client/cifs_spnego.c                        |   4 +-
 fs/smb/client/cifsglob.h                           |   4 +
 fs/smb/client/connect.c                            |  16 +-
 fs/smb/client/fs_context.c                         |  18 +-
 fs/smb/client/inode.c                              |  13 ++
 fs/smb/client/reparse.c                            |  10 +-
 fs/smb/client/sess.c                               |   3 +-
 fs/smb/client/smb2pdu.c                            |   4 +-
 fs/smb/common/smbfsctl.h                           |   3 +
 fs/smb/server/connection.c                         |  20 ++
 fs/smb/server/connection.h                         |   2 +
 fs/smb/server/ksmbd_work.c                         |   3 -
 fs/smb/server/ksmbd_work.h                         |   1 -
 fs/smb/server/oplock.c                             |  43 ++--
 fs/smb/server/oplock.h                             |   1 -
 fs/smb/server/server.c                             |  14 +-
 fs/vboxsf/super.c                                  |   3 +-
 include/linux/fs.h                                 |   2 +
 include/linux/i8253.h                              |   1 -
 include/linux/io_uring_types.h                     |   3 -
 include/linux/nvme-tcp.h                           |   2 +
 include/net/bluetooth/hci_core.h                   | 108 ++++-----
 include/net/bluetooth/l2cap.h                      |   3 +-
 include/net/netfilter/nf_tables.h                  |  20 +-
 include/sound/soc.h                                |   5 +-
 init/Kconfig                                       |   2 +-
 io_uring/io-wq.c                                   |  23 +-
 io_uring/io_uring.c                                | 251 +++++++++++++++------
 io_uring/io_uring.h                                |   8 +-
 io_uring/kbuf.c                                    | 173 ++++----------
 io_uring/kbuf.h                                    |   3 +-
 io_uring/rsrc.c                                    |  39 ----
 kernel/bpf/ringbuf.c                               |  12 +-
 kernel/sched/core.c                                |  13 +-
 kernel/sched/debug.c                               |   2 +
 kernel/sys.c                                       |   2 +
 kernel/time/hrtimer.c                              |  40 ++--
 lib/buildid.c                                      |   5 +
 mm/mmap.c                                          |  69 ++++--
 mm/nommu.c                                         |   7 +
 net/bluetooth/hci_core.c                           |  10 +-
 net/bluetooth/hci_event.c                          |  37 +--
 net/bluetooth/iso.c                                |   6 -
 net/bluetooth/l2cap_core.c                         | 181 +++++++--------
 net/bluetooth/l2cap_sock.c                         |  15 +-
 net/bluetooth/rfcomm/core.c                        |   6 -
 net/bluetooth/sco.c                                |  12 +-
 net/core/dev.c                                     |   2 +-
 net/core/netpoll.c                                 |   9 +-
 net/ipv4/tcp.c                                     |  20 +-
 net/ipv6/addrconf.c                                |  15 +-
 net/mptcp/protocol.h                               |   2 +
 net/netfilter/ipvs/ip_vs_ctl.c                     |   8 +-
 net/netfilter/nf_conncount.c                       |   6 +-
 net/netfilter/nf_tables_api.c                      |  25 +-
 net/netfilter/nft_connlimit.c                      |   4 +-
 net/netfilter/nft_counter.c                        |   4 +-
 net/netfilter/nft_ct.c                             |   6 +-
 net/netfilter/nft_dynset.c                         |   2 +-
 net/netfilter/nft_exthdr.c                         |  10 +-
 net/netfilter/nft_last.c                           |   4 +-
 net/netfilter/nft_limit.c                          |  14 +-
 net/netfilter/nft_quota.c                          |   4 +-
 net/netfilter/nft_set_hash.c                       |   8 +-
 net/netfilter/nft_set_pipapo.c                     |  18 +-
 net/netfilter/nft_set_rbtree.c                     |  11 +-
 net/openvswitch/flow_netlink.c                     |  15 +-
 net/sched/sch_api.c                                |   6 +
 net/sched/sch_gred.c                               |   3 +-
 net/sctp/stream.c                                  |   2 +-
 net/switchdev/switchdev.c                          |  25 +-
 net/wireless/core.c                                |   7 +
 rust/kernel/error.rs                               |   2 +-
 rust/kernel/init.rs                                |  23 +-
 rust/kernel/init/macros.rs                         |   6 +-
 rust/kernel/sync.rs                                |  10 +-
 scripts/generate_rust_analyzer.py                  |  30 ++-
 sound/pci/hda/patch_realtek.c                      |   1 +
 sound/soc/amd/yc/acp6x-mach.c                      |   7 +
 sound/soc/codecs/arizona.c                         |  14 +-
 sound/soc/codecs/cs42l43.c                         |   2 +-
 sound/soc/codecs/madera.c                          |  10 +-
 sound/soc/codecs/rt722-sdca-sdw.c                  |   4 +
 sound/soc/codecs/tas2764.c                         |  10 +-
 sound/soc/codecs/tas2764.h                         |   8 +-
 sound/soc/codecs/tas2770.c                         |   2 +-
 sound/soc/codecs/wm0010.c                          |  13 +-
 sound/soc/codecs/wm5110.c                          |   8 +-
 sound/soc/generic/simple-card-utils.c              |   1 +
 sound/soc/sh/rcar/core.c                           |  14 --
 sound/soc/sh/rcar/rsnd.h                           |   1 -
 sound/soc/sh/rcar/src.c                            | 116 ++++++++--
 sound/soc/sh/rcar/ssi.c                            |   3 +-
 sound/soc/soc-ops.c                                |  15 +-
 sound/soc/sof/amd/acp-ipc.c                        |  23 +-
 sound/soc/sof/intel/hda-codec.c                    |   1 +
 tools/objtool/check.c                              |   9 +
 .../selftests/bpf/prog_tests/sockmap_basic.c       |   6 +-
 186 files changed, 1803 insertions(+), 1167 deletions(-)

[PATCH 6.6 001/166] clockevents/drivers/i8253: Fix stop sequence for timer 0

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Woodhouse <dwmw@amazon.co.uk>

commit 531b2ca0a940ac9db03f246c8b77c4201de72b00 upstream.

According to the data sheet, writing the MODE register should stop the
counter (and thus the interrupts). This appears to work on real hardware,
at least modern Intel and AMD systems. It should also work on Hyper-V.

However, on some buggy virtual machines the mode change doesn't have any
effect until the counter is subsequently loaded (or perhaps when the IRQ
next fires).

So, set MODE 0 and then load the counter, to ensure that those buggy VMs
do the right thing and the interrupts stop. And then write MODE 0 *again*
to stop the counter on compliant implementations too.

Apparently, Hyper-V keeps firing the IRQ *repeatedly* even in mode zero
when it should only happen once, but the second MODE write stops that too.

Userspace test program (mostly written by tglx):
=====
 #include <stdio.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <stdint.h>
 #include <sys/io.h>

static __always_inline void __out##bwl(type value, uint16_t port)	\
{									\
	asm volatile("out" #bwl " %" #bw "0, %w1"			\
		     : : "a"(value), "Nd"(port));			\
}									\
									\
static __always_inline type __in##bwl(uint16_t port)			\
{									\
	type value;							\
	asm volatile("in" #bwl " %w1, %" #bw "0"			\
		     : "=a"(value) : "Nd"(port));			\
	return value;							\
}

BUILDIO(b, b, uint8_t)

 #define inb __inb
 #define outb __outb

 #define PIT_MODE	0x43
 #define PIT_CH0	0x40
 #define PIT_CH2	0x42

static int is8254;

static void dump_pit(void)
{
	if (is8254) {
		// Latch and output counter and status
		outb(0xC2, PIT_MODE);
		printf("%02x %02x %02x\n", inb(PIT_CH0), inb(PIT_CH0), inb(PIT_CH0));
	} else {
		// Latch and output counter
		outb(0x0, PIT_MODE);
		printf("%02x %02x\n", inb(PIT_CH0), inb(PIT_CH0));
	}
}

int main(int argc, char* argv[])
{
	int nr_counts = 2;

	if (argc > 1)
		nr_counts = atoi(argv[1]);

	if (argc > 2)
		is8254 = 1;

	if (ioperm(0x40, 4, 1) != 0)
		return 1;

	dump_pit();

	printf("Set oneshot\n");
	outb(0x38, PIT_MODE);
	outb(0x00, PIT_CH0);
	outb(0x0F, PIT_CH0);

	dump_pit();
	usleep(1000);
	dump_pit();

	printf("Set periodic\n");
	outb(0x34, PIT_MODE);
	outb(0x00, PIT_CH0);
	outb(0x0F, PIT_CH0);

	dump_pit();
	usleep(1000);
	dump_pit();
	dump_pit();
	usleep(100000);
	dump_pit();
	usleep(100000);
	dump_pit();

	printf("Set stop (%d counter writes)\n", nr_counts);
	outb(0x30, PIT_MODE);
	while (nr_counts--)
		outb(0xFF, PIT_CH0);

	dump_pit();
	usleep(100000);
	dump_pit();
	usleep(100000);
	dump_pit();

	printf("Set MODE 0\n");
	outb(0x30, PIT_MODE);

	dump_pit();
	usleep(100000);
	dump_pit();
	usleep(100000);
	dump_pit();

	return 0;
}
=====

Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/mshyperv.c |   11 -----------
 drivers/clocksource/i8253.c    |   36 +++++++++++++++++++++++++-----------
 include/linux/i8253.h          |    1 -
 3 files changed, 25 insertions(+), 23 deletions(-)

--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -16,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kexec.h>
-#include <linux/i8253.h>
 #include <linux/random.h>
 #include <asm/processor.h>
 #include <asm/hypervisor.h>
@@ -575,16 +574,6 @@ static void __init ms_hyperv_init_platfo
 	if (efi_enabled(EFI_BOOT))
 		x86_platform.get_nmi_reason = hv_get_nmi_reason;
 
-	/*
-	 * Hyper-V VMs have a PIT emulation quirk such that zeroing the
-	 * counter register during PIT shutdown restarts the PIT. So it
-	 * continues to interrupt @18.2 HZ. Setting i8253_clear_counter
-	 * to false tells pit_shutdown() not to zero the counter so that
-	 * the PIT really is shutdown. Generation 2 VMs don't have a PIT,
-	 * and setting this value has no effect.
-	 */
-	i8253_clear_counter_on_shutdown = false;
-
 #if IS_ENABLED(CONFIG_HYPERV)
 	if ((hv_get_isolation_type() == HV_ISOLATION_TYPE_VBS) ||
 	    ms_hyperv.paravisor_present)
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -20,13 +20,6 @@
 DEFINE_RAW_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
-/*
- * Handle PIT quirk in pit_shutdown() where zeroing the counter register
- * restarts the PIT, negating the shutdown. On platforms with the quirk,
- * platform specific code can set this to false.
- */
-bool i8253_clear_counter_on_shutdown __ro_after_init = true;
-
 #ifdef CONFIG_CLKSRC_I8253
 /*
  * Since the PIT overflows every tick, its not very useful
@@ -112,12 +105,33 @@ void clockevent_i8253_disable(void)
 {
 	raw_spin_lock(&i8253_lock);
 
+	/*
+	 * Writing the MODE register should stop the counter, according to
+	 * the datasheet. This appears to work on real hardware (well, on
+	 * modern Intel and AMD boxes; I didn't dig the Pegasos out of the
+	 * shed).
+	 *
+	 * However, some virtual implementations differ, and the MODE change
+	 * doesn't have any effect until either the counter is written (KVM
+	 * in-kernel PIT) or the next interrupt (QEMU). And in those cases,
+	 * it may not stop the *count*, only the interrupts. Although in
+	 * the virt case, that probably doesn't matter, as the value of the
+	 * counter will only be calculated on demand if the guest reads it;
+	 * it's the interrupts which cause steal time.
+	 *
+	 * Hyper-V apparently has a bug where even in mode 0, the IRQ keeps
+	 * firing repeatedly if the counter is running. But it *does* do the
+	 * right thing when the MODE register is written.
+	 *
+	 * So: write the MODE and then load the counter, which ensures that
+	 * the IRQ is stopped on those buggy virt implementations. And then
+	 * write the MODE again, which is the right way to stop it.
+	 */
 	outb_p(0x30, PIT_MODE);
+	outb_p(0, PIT_CH0);
+	outb_p(0, PIT_CH0);
 
-	if (i8253_clear_counter_on_shutdown) {
-		outb_p(0, PIT_CH0);
-		outb_p(0, PIT_CH0);
-	}
+	outb_p(0x30, PIT_MODE);
 
 	raw_spin_unlock(&i8253_lock);
 }
--- a/include/linux/i8253.h
+++ b/include/linux/i8253.h
@@ -21,7 +21,6 @@
 #define PIT_LATCH	((PIT_TICK_RATE + HZ/2) / HZ)
 
 extern raw_spinlock_t i8253_lock;
-extern bool i8253_clear_counter_on_shutdown;
 extern struct clock_event_device i8253_clockevent;
 extern void clockevent_i8253_init(bool oneshot);
 extern void clockevent_i8253_disable(void);

[PATCH 6.6 002/166] sched/isolation: Prevent boot crash when the boot CPU is nohz_full

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:

  08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").

However after:

  aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")

the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.

Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.

This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.

There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).

[ Apply only documentation changes as commit which causes boot
  crash when boot CPU is nohz_full is not backported to stable
  kernels - Krishanth ]

Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Signed-off-by: Krishanth Jagaduri <Krishanth.Jagaduri@sony.com>
[ strip out upstream commit and Fixes: so tools don't get confused that
  this commit actually does anything real - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/timers/no_hz.rst |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/Documentation/timers/no_hz.rst
+++ b/Documentation/timers/no_hz.rst
@@ -129,11 +129,8 @@ adaptive-tick CPUs:  At least one non-ad
 online to handle timekeeping tasks in order to ensure that system
 calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
 (This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
-user processes to observe slight drifts in clock rate.)  Therefore, the
-boot CPU is prohibited from entering adaptive-ticks mode.  Specifying a
-"nohz_full=" mask that includes the boot CPU will result in a boot-time
-error message, and the boot CPU will be removed from the mask.  Note that
-this means that your system must have at least two CPUs in order for
+user processes to observe slight drifts in clock rate.) Note that this
+means that your system must have at least two CPUs in order for
 CONFIG_NO_HZ_FULL=y to do anything for you.
 
 Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.

[PATCH 6.6 003/166] zram: fix NULL pointer in comp_algorithm_show()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Shixin <liushixin2@huawei.com>

commit f364cdeb38938f9d03061682b8ff3779dd1730e5 upstream.

LTP reported a NULL pointer dereference as followed:

 CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3
 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __pi_strcmp+0x24/0x140
 lr : zcomp_available_show+0x60/0x100 [zram]
 sp : ffff800088b93b90
 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0
 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000
 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900
 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280
 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000
 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c
 x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000
 Call trace:
  __pi_strcmp+0x24/0x140
  comp_algorithm_show+0x40/0x70 [zram]
  dev_attr_show+0x28/0x80
  sysfs_kf_seq_show+0x90/0x140
  kernfs_seq_show+0x34/0x48
  seq_read_iter+0x1d4/0x4e8
  kernfs_fop_read_iter+0x40/0x58
  new_sync_read+0x9c/0x168
  vfs_read+0x1a8/0x1f8
  ksys_read+0x74/0x108
  __arm64_sys_read+0x24/0x38
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0xc8/0xf0
  do_el0_svc+0x24/0x38
  el0_svc+0x38/0x138
  el0t_64_sync_handler+0xc0/0xc8
  el0t_64_sync+0x188/0x190

The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if
comp_algorithm_set() has not been called.  User can access the zram device
by sysfs after device_add_disk(), so there is a time window to trigger the
NULL pointer dereference.  Move it ahead device_add_disk() to make sure
when user can access the zram device, it is ready.  comp_algorithm_set()
is protected by zram->init_lock in other places and no such problem.

Link: https://lkml.kernel.org/r/20241108100147.3776123-1-liushixin2@huawei.com
Fixes: 7ac07a26dea7 ("zram: preparation for multi-zcomp support")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[This fix does not backport zram_comp_params_reset which was introduced after
 v6.6, in commit f2bac7ad187d ("zram: introduce zcomp_params structure")]
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/zram/zram_drv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -2247,6 +2247,8 @@ static int zram_add(void)
 	zram->disk->private_data = zram;
 	snprintf(zram->disk->disk_name, 16, "zram%d", device_id);
 
+	comp_algorithm_set(zram, ZRAM_PRIMARY_COMP, default_compressor);
+
 	/* Actual capacity set using sysfs (/sys/block/zram<id>/disksize */
 	set_capacity(zram->disk, 0);
 	/* zram devices sort of resembles non-rotational disks */
@@ -2281,8 +2283,6 @@ static int zram_add(void)
 	if (ret)
 		goto out_cleanup_disk;
 
-	comp_algorithm_set(zram, ZRAM_PRIMARY_COMP, default_compressor);
-
 	zram_debugfs_register(zram);
 	pr_info("Added device: %s\n", zram->disk->disk_name);
 	return device_id;

[PATCH 6.6 004/166] hrtimer: Use and report correct timerslack values for realtime tasks

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Moessbauer <felix.moessbauer@siemens.com>

commit ed4fb6d7ef68111bb539283561953e5c6e9a6e38 upstream.

The timerslack_ns setting is used to specify how much the hardware
timers should be delayed, to potentially dispatch multiple timers in a
single interrupt. This is a performance optimization. Timers of
realtime tasks (having a realtime scheduling policy) should not be
delayed.

This logic was inconsitently applied to the hrtimers, leading to delays
of realtime tasks which used timed waits for events (e.g. condition
variables). Due to the downstream override of the slack for rt tasks,
the procfs reported incorrect (non-zero) timerslack_ns values.

This is changed by setting the timer_slack_ns task attribute to 0 for
all tasks with a rt policy. By that, downstream users do not need to
specially handle rt tasks (w.r.t. the slack), and the procfs entry
shows the correct value of "0". Setting non-zero slack values (either
via procfs or PR_SET_TIMERSLACK) on tasks with a rt policy is ignored,
as stated in "man 2 PR_SET_TIMERSLACK":

  Timer slack is not applied to threads that are scheduled under a
  real-time scheduling policy (see sched_setscheduler(2)).

The special handling of timerslack on rt tasks in downstream users
is removed as well.

Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240814121032.368444-2-felix.moessbauer@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/base.c        |    9 +++++----
 fs/select.c           |   11 ++++-------
 kernel/sched/core.c   |    8 ++++++++
 kernel/sys.c          |    2 ++
 kernel/time/hrtimer.c |   18 +++---------------
 5 files changed, 22 insertions(+), 26 deletions(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2633,10 +2633,11 @@ static ssize_t timerslack_ns_write(struc
 	}
 
 	task_lock(p);
-	if (slack_ns == 0)
-		p->timer_slack_ns = p->default_timer_slack_ns;
-	else
-		p->timer_slack_ns = slack_ns;
+	if (task_is_realtime(p))
+		slack_ns = 0;
+	else if (slack_ns == 0)
+		slack_ns = p->default_timer_slack_ns;
+	p->timer_slack_ns = slack_ns;
 	task_unlock(p);
 
 out:
--- a/fs/select.c
+++ b/fs/select.c
@@ -77,19 +77,16 @@ u64 select_estimate_accuracy(struct time
 {
 	u64 ret;
 	struct timespec64 now;
+	u64 slack = current->timer_slack_ns;
 
-	/*
-	 * Realtime tasks get a slack of 0 for obvious reasons.
-	 */
-
-	if (rt_task(current))
+	if (slack == 0)
 		return 0;
 
 	ktime_get_ts64(&now);
 	now = timespec64_sub(*tv, now);
 	ret = __estimate_accuracy(&now);
-	if (ret < current->timer_slack_ns)
-		return current->timer_slack_ns;
+	if (ret < slack)
+		return slack;
 	return ret;
 }
 
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7530,6 +7530,14 @@ static void __setscheduler_params(struct
 	else if (fair_policy(policy))
 		p->static_prio = NICE_TO_PRIO(attr->sched_nice);
 
+	/* rt-policy tasks do not have a timerslack */
+	if (task_is_realtime(p)) {
+		p->timer_slack_ns = 0;
+	} else if (p->timer_slack_ns == 0) {
+		/* when switching back to non-rt policy, restore timerslack */
+		p->timer_slack_ns = p->default_timer_slack_ns;
+	}
+
 	/*
 	 * __sched_setscheduler() ensures attr->sched_priority == 0 when
 	 * !rt_policy. Always setting this ensures that things like
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -2535,6 +2535,8 @@ SYSCALL_DEFINE5(prctl, int, option, unsi
 			error = current->timer_slack_ns;
 		break;
 	case PR_SET_TIMERSLACK:
+		if (task_is_realtime(current))
+			break;
 		if (arg2 <= 0)
 			current->timer_slack_ns =
 					current->default_timer_slack_ns;
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -2093,14 +2093,9 @@ long hrtimer_nanosleep(ktime_t rqtp, con
 	struct restart_block *restart;
 	struct hrtimer_sleeper t;
 	int ret = 0;
-	u64 slack;
-
-	slack = current->timer_slack_ns;
-	if (rt_task(current))
-		slack = 0;
 
 	hrtimer_init_sleeper_on_stack(&t, clockid, mode);
-	hrtimer_set_expires_range_ns(&t.timer, rqtp, slack);
+	hrtimer_set_expires_range_ns(&t.timer, rqtp, current->timer_slack_ns);
 	ret = do_nanosleep(&t, mode);
 	if (ret != -ERESTART_RESTARTBLOCK)
 		goto out;
@@ -2281,7 +2276,7 @@ void __init hrtimers_init(void)
 /**
  * schedule_hrtimeout_range_clock - sleep until timeout
  * @expires:	timeout value (ktime_t)
- * @delta:	slack in expires timeout (ktime_t) for SCHED_OTHER tasks
+ * @delta:	slack in expires timeout (ktime_t)
  * @mode:	timer mode
  * @clock_id:	timer clock to be used
  */
@@ -2308,13 +2303,6 @@ schedule_hrtimeout_range_clock(ktime_t *
 		return -EINTR;
 	}
 
-	/*
-	 * Override any slack passed by the user if under
-	 * rt contraints.
-	 */
-	if (rt_task(current))
-		delta = 0;
-
 	hrtimer_init_sleeper_on_stack(&t, clock_id, mode);
 	hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
 	hrtimer_sleeper_start_expires(&t, mode);
@@ -2334,7 +2322,7 @@ EXPORT_SYMBOL_GPL(schedule_hrtimeout_ran
 /**
  * schedule_hrtimeout_range - sleep until timeout
  * @expires:	timeout value (ktime_t)
- * @delta:	slack in expires timeout (ktime_t) for SCHED_OTHER tasks
+ * @delta:	slack in expires timeout (ktime_t)
  * @mode:	timer mode
  *
  * Make the current task sleep until the given expiry time has

[PATCH 6.6 005/166] bpf: Use raw_spinlock_t in ringbuf

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wander Lairson Costa <wander.lairson@gmail.com>

commit 8b62645b09f870d70c7910e7550289d444239a46 upstream.

The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
 dump_backtrace+0xac/0x130
 show_stack+0x1c/0x30
 dump_stack_lvl+0xac/0xe8
 dump_stack+0x18/0x30
 __might_resched+0x3bc/0x4fc
 rt_spin_lock+0x8c/0x1a4
 __bpf_ringbuf_reserve+0xc4/0x254
 bpf_ringbuf_reserve_dynptr+0x5c/0xdc
 bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
 trace_call_bpf+0x238/0x774
 perf_call_bpf_enter.isra.0+0x104/0x194
 perf_syscall_enter+0x2f8/0x510
 trace_sys_enter+0x39c/0x564
 syscall_trace_enter+0x220/0x3c0
 do_el0_svc+0x138/0x1dc
 el0_svc+0x54/0x130
 el0t_64_sync_handler+0x134/0x150
 el0t_64_sync+0x17c/0x180

Switch the spinlock to raw_spinlock_t to avoid this error.

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Brian Grech <bgrech@redhat.com>
Signed-off-by: Wander Lairson Costa <wander.lairson@gmail.com>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240920190700.617253-1-wander@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
---
 kernel/bpf/ringbuf.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/kernel/bpf/ringbuf.c
+++ b/kernel/bpf/ringbuf.c
@@ -29,7 +29,7 @@ struct bpf_ringbuf {
 	u64 mask;
 	struct page **pages;
 	int nr_pages;
-	spinlock_t spinlock ____cacheline_aligned_in_smp;
+	raw_spinlock_t spinlock ____cacheline_aligned_in_smp;
 	/* For user-space producer ring buffers, an atomic_t busy bit is used
 	 * to synchronize access to the ring buffers in the kernel, rather than
 	 * the spinlock that is used for kernel-producer ring buffers. This is
@@ -173,7 +173,7 @@ static struct bpf_ringbuf *bpf_ringbuf_a
 	if (!rb)
 		return NULL;
 
-	spin_lock_init(&rb->spinlock);
+	raw_spin_lock_init(&rb->spinlock);
 	atomic_set(&rb->busy, 0);
 	init_waitqueue_head(&rb->waitq);
 	init_irq_work(&rb->work, bpf_ringbuf_notify);
@@ -417,10 +417,10 @@ static void *__bpf_ringbuf_reserve(struc
 	cons_pos = smp_load_acquire(&rb->consumer_pos);
 
 	if (in_nmi()) {
-		if (!spin_trylock_irqsave(&rb->spinlock, flags))
+		if (!raw_spin_trylock_irqsave(&rb->spinlock, flags))
 			return NULL;
 	} else {
-		spin_lock_irqsave(&rb->spinlock, flags);
+		raw_spin_lock_irqsave(&rb->spinlock, flags);
 	}
 
 	pend_pos = rb->pending_pos;
@@ -446,7 +446,7 @@ static void *__bpf_ringbuf_reserve(struc
 	 */
 	if (new_prod_pos - cons_pos > rb->mask ||
 	    new_prod_pos - pend_pos > rb->mask) {
-		spin_unlock_irqrestore(&rb->spinlock, flags);
+		raw_spin_unlock_irqrestore(&rb->spinlock, flags);
 		return NULL;
 	}
 
@@ -458,7 +458,7 @@ static void *__bpf_ringbuf_reserve(struc
 	/* pairs with consumer's smp_load_acquire() */
 	smp_store_release(&rb->producer_pos, new_prod_pos);
 
-	spin_unlock_irqrestore(&rb->spinlock, flags);
+	raw_spin_unlock_irqrestore(&rb->spinlock, flags);
 
 	return (void *)hdr + BPF_RINGBUF_HDR_SZ;
 }

[PATCH 6.6 006/166] tcp: fix races in tcp_abort()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 5ce4645c23cf5f048eb8e9ce49e514bababdee85 upstream.

tcp_abort() has the same issue than the one fixed in the prior patch
in tcp_write_err().

In order to get consistent results from tcp_poll(), we must call
sk_error_report() after tcp_done().

We can use tcp_done_with_error() to centralize this logic.

Fixes: c1e64e298b8c ("net: diag: Support destroying TCP sockets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[youngmin: Resolved minor conflict in net/ipv4/tcp.c]
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -4630,13 +4630,9 @@ int tcp_abort(struct sock *sk, int err)
 	bh_lock_sock(sk);
 
 	if (!sock_flag(sk, SOCK_DEAD)) {
-		WRITE_ONCE(sk->sk_err, err);
-		/* This barrier is coupled with smp_rmb() in tcp_poll() */
-		smp_wmb();
-		sk_error_report(sk);
 		if (tcp_need_reset(sk->sk_state))
 			tcp_send_active_reset(sk, GFP_ATOMIC);
-		tcp_done(sk);
+		tcp_done_with_error(sk, err);
 	}
 
 	bh_unlock_sock(sk);

[PATCH 6.6 007/166] tcp: fix forever orphan socket caused by tcp_abort

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xueming Feng <kuro@kuroa.me>

commit bac76cf89816bff06c4ec2f3df97dc34e150a1c4 upstream.

We have some problem closing zero-window fin-wait-1 tcp sockets in our
environment. This patch come from the investigation.

Previously tcp_abort only sends out reset and calls tcp_done when the
socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only
purging the write queue, but not close the socket and left it to the
timer.

While purging the write queue, tp->packets_out and sk->sk_write_queue
is cleared along the way. However tcp_retransmit_timer have early
return based on !tp->packets_out and tcp_probe_timer have early
return based on !sk->sk_write_queue.

This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched
and socket not being killed by the timers, converting a zero-windowed
orphan into a forever orphan.

This patch removes the SOCK_DEAD check in tcp_abort, making it send
reset to peer and close the socket accordingly. Preventing the
timer-less orphan from happening.

According to Lorenzo's email in the v1 thread, the check was there to
prevent force-closing the same socket twice. That situation is handled
by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is
already closed.

The -ENOENT code comes from the associate patch Lorenzo made for
iproute2-ss; link attached below, which also conform to RFC 9293.

At the end of the patch, tcp_write_queue_purge(sk) is removed because it
was already called in tcp_done_with_error().

p.s. This is the same patch with v2. Resent due to mis-labeled "changes
requested" on patchwork.kernel.org.

Link: https://patchwork.ozlabs.org/project/netdev/patch/1450773094-7978-3-git-send-email-lorenzo@google.com/
Fixes: c1e64e298b8c ("net: diag: Support destroying TCP sockets.")
Signed-off-by: Xueming Feng <kuro@kuroa.me>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240826102327.1461482-1-kuro@kuroa.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/lkml/Z9OZS%2Fhc+v5og6%2FU@perf/
[youngmin: Resolved minor conflict in net/ipv4/tcp.c]
Signed-off-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -4620,6 +4620,13 @@ int tcp_abort(struct sock *sk, int err)
 		/* Don't race with userspace socket closes such as tcp_close. */
 		lock_sock(sk);
 
+	/* Avoid closing the same socket twice. */
+	if (sk->sk_state == TCP_CLOSE) {
+		if (!has_current_bpf_ctx())
+			release_sock(sk);
+		return -ENOENT;
+	}
+
 	if (sk->sk_state == TCP_LISTEN) {
 		tcp_set_state(sk, TCP_CLOSE);
 		inet_csk_listen_stop(sk);
@@ -4629,15 +4636,12 @@ int tcp_abort(struct sock *sk, int err)
 	local_bh_disable();
 	bh_lock_sock(sk);
 
-	if (!sock_flag(sk, SOCK_DEAD)) {
-		if (tcp_need_reset(sk->sk_state))
-			tcp_send_active_reset(sk, GFP_ATOMIC);
-		tcp_done_with_error(sk, err);
-	}
+	if (tcp_need_reset(sk->sk_state))
+		tcp_send_active_reset(sk, GFP_ATOMIC);
+	tcp_done_with_error(sk, err);
 
 	bh_unlock_sock(sk);
 	local_bh_enable();
-	tcp_write_queue_purge(sk);
 	if (!has_current_bpf_ctx())
 		release_sock(sk);
 	return 0;

[PATCH 6.6 008/166] fbdev: hyperv_fb: iounmap() the correct memory when removing a device

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Kelley <mhklinux@outlook.com>

[ Upstream commit 7241c886a71797cc51efc6fadec7076fcf6435c2 ]

When a Hyper-V framebuffer device is removed, or the driver is unbound
from a device, any allocated and/or mapped memory must be released. In
particular, MMIO address space that was mapped to the framebuffer must
be unmapped. Current code unmaps the wrong address, resulting in an
error like:

[ 4093.980597] iounmap: bad address 00000000c936c05c

followed by a stack dump.

Commit d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for
Hyper-V frame buffer driver") changed the kind of address stored in
info->screen_base, and the iounmap() call in hvfb_putmem() was not
updated accordingly.

Fix this by updating hvfb_putmem() to unmap the correct address.

Fixes: d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250209235252.2987-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250209235252.2987-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/hyperv_fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index b9965cbdd7642..80e8ec36b7db2 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -1106,7 +1106,7 @@ static void hvfb_putmem(struct hv_device *hdev, struct fb_info *info)
 
 	if (par->need_docopy) {
 		vfree(par->dio_vp);
-		iounmap(info->screen_base);
+		iounmap(par->mmio_vp);
 		vmbus_free_mmio(par->mem->start, screen_fb_size);
 	} else {
 		hvfb_release_phymem(hdev, info->fix.smem_start,
-- 
2.39.5

[PATCH 6.6 009/166] pinctrl: bcm281xx: Fix incorrect regmap max_registers value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artur Weber <aweber.kernel@gmail.com>

[ Upstream commit 68283c1cb573143c0b7515e93206f3503616bc10 ]

The max_registers value does not take into consideration the stride;
currently, it's set to the number of the last pin, but this does not
accurately represent the final register.

Fix this by multiplying the current value by 4.

Fixes: 54b1aa5a5b16 ("ARM: pinctrl: Add Broadcom Capri pinctrl driver")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/20250207-bcm21664-pinctrl-v1-2-e7cfac9b2d3b@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/bcm/pinctrl-bcm281xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
index 73dbf29c002f3..cf6efa9c0364a 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c
@@ -974,7 +974,7 @@ static const struct regmap_config bcm281xx_pinctrl_regmap_config = {
 	.reg_bits = 32,
 	.reg_stride = 4,
 	.val_bits = 32,
-	.max_register = BCM281XX_PIN_VC_CAM3_SDA,
+	.max_register = BCM281XX_PIN_VC_CAM3_SDA * 4,
 };
 
 static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-- 
2.39.5

[PATCH 6.6 010/166] netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 5cfe5612ca9590db69b9be29dc83041dbf001108 ]

nft_ct_pcpu_template is a per-CPU variable and relies on disabled BH for its
locking. The refcounter is read and if its value is set to one then the
refcounter is incremented and variable is used - otherwise it is already
in use and left untouched.

Without per-CPU locking in local_bh_disable() on PREEMPT_RT the
read-then-increment operation is not atomic and therefore racy.

This can be avoided by using unconditionally __refcount_inc() which will
increment counter and return the old value as an atomic operation.
In case the returned counter is not one, the variable is in use and we
need to decrement counter. Otherwise we can use it.

Use __refcount_inc() instead of read and a conditional increment.

Fixes: edee4f1e9245 ("netfilter: nft_ct: add zone id set support")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_ct.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c
index 255640013ab84..ab1214da99ff3 100644
--- a/net/netfilter/nft_ct.c
+++ b/net/netfilter/nft_ct.c
@@ -230,6 +230,7 @@ static void nft_ct_set_zone_eval(const struct nft_expr *expr,
 	enum ip_conntrack_info ctinfo;
 	u16 value = nft_reg_load16(&regs->data[priv->sreg]);
 	struct nf_conn *ct;
+	int oldcnt;
 
 	ct = nf_ct_get(skb, &ctinfo);
 	if (ct) /* already tracked */
@@ -250,10 +251,11 @@ static void nft_ct_set_zone_eval(const struct nft_expr *expr,
 
 	ct = this_cpu_read(nft_ct_pcpu_template);
 
-	if (likely(refcount_read(&ct->ct_general.use) == 1)) {
-		refcount_inc(&ct->ct_general.use);
+	__refcount_inc(&ct->ct_general.use, &oldcnt);
+	if (likely(oldcnt == 1)) {
 		nf_ct_zone_add(ct, &zone);
 	} else {
+		refcount_dec(&ct->ct_general.use);
 		/* previous skb got queued to userspace, allocate temporary
 		 * one until percpu template can be reused.
 		 */
-- 
2.39.5

[PATCH 6.6 011/166] ice: fix memory leak in aRFS after reset

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grzegorz Nitka <grzegorz.nitka@intel.com>

[ Upstream commit 23d97f18901ef5e4e264e3b1777fe65c760186b5 ]

Fix aRFS (accelerated Receive Flow Steering) structures memory leak by
adding a checker to verify if aRFS memory is already allocated while
configuring VSI. aRFS objects are allocated in two cases:
- as part of VSI initialization (at probe), and
- as part of reset handling

However, VSI reconfiguration executed during reset involves memory
allocation one more time, without prior releasing already allocated
resources. This led to the memory leak with the following signature:

[root@os-delivery ~]# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff3c1ca7252e6000 (size 8192):
  comm "kworker/0:0", pid 8, jiffies 4296833052
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 0):
    [<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340
    [<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice]
    [<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice]
    [<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice]
    [<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice]
    [<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice]
    [<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0
    [<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20
    [<ffffffff98f0b6d9>] process_one_work+0x179/0x390
    [<ffffffff98f0c1e9>] worker_thread+0x239/0x340
    [<ffffffff98f14abc>] kthread+0xcc/0x100
    [<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50
    [<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30
    ...

Fixes: 28bf26724fdb ("ice: Implement aRFS")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_arfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_arfs.c b/drivers/net/ethernet/intel/ice/ice_arfs.c
index cca0e753f38ff..d7e0116f67737 100644
--- a/drivers/net/ethernet/intel/ice/ice_arfs.c
+++ b/drivers/net/ethernet/intel/ice/ice_arfs.c
@@ -510,7 +510,7 @@ void ice_init_arfs(struct ice_vsi *vsi)
 	struct hlist_head *arfs_fltr_list;
 	unsigned int i;
 
-	if (!vsi || vsi->type != ICE_VSI_PF)
+	if (!vsi || vsi->type != ICE_VSI_PF || ice_is_arfs_active(vsi))
 		return;
 
 	arfs_fltr_list = kcalloc(ICE_MAX_ARFS_LIST, sizeof(*arfs_fltr_list),
-- 
2.39.5

[PATCH 6.6 012/166] netfilter: nf_conncount: garbage collection is not skipped when jiffies wrap around

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicklas Bo Jensen <njensen@akamai.com>

[ Upstream commit df08c94baafb001de6cf44bb7098bb557f36c335 ]

nf_conncount is supposed to skip garbage collection if it has already
run garbage collection in the same jiffy. Unfortunately, this is broken
when jiffies wrap around which this patch fixes.

The problem is that last_gc in the nf_conncount_list struct is an u32,
but jiffies is an unsigned long which is 8 bytes on my systems. When
those two are compared it only works until last_gc wraps around.

See bug report: https://bugzilla.netfilter.org/show_bug.cgi?id=1778
for more details.

Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Nicklas Bo Jensen <njensen@akamai.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conncount.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index 5885810da412f..71869ad466467 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -132,7 +132,7 @@ static int __nf_conncount_add(struct net *net,
 	struct nf_conn *found_ct;
 	unsigned int collect = 0;
 
-	if (time_is_after_eq_jiffies((unsigned long)list->last_gc))
+	if ((u32)jiffies == list->last_gc)
 		goto add_new_node;
 
 	/* check the saved connections */
@@ -234,7 +234,7 @@ bool nf_conncount_gc_list(struct net *net,
 	bool ret = false;
 
 	/* don't bother if we just did GC */
-	if (time_is_after_eq_jiffies((unsigned long)READ_ONCE(list->last_gc)))
+	if ((u32)jiffies == READ_ONCE(list->last_gc))
 		return false;
 
 	/* don't bother if other cpu is already doing GC */
-- 
2.39.5

[PATCH 6.6 013/166] sched: address a potential NULL pointer dereference in the GRED scheduler.

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jun Yang <juny24602@gmail.com>

[ Upstream commit 115ef44a98220fddfab37a39a19370497cd718b9 ]

If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.

When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().

Signed-off-by: Jun Yang <juny24602@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: f25c0515c521 ("net: sched: gred: dynamically allocate tc_gred_qopt_offload")
Link: https://patch.msgid.link/20250305154410.3505642-1-juny24602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_gred.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index 872d127c9db42..fa7a1b69c0f35 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -913,7 +913,8 @@ static void gred_destroy(struct Qdisc *sch)
 	for (i = 0; i < table->DPs; i++)
 		gred_destroy_vq(table->tab[i]);
 
-	gred_offload(sch, TC_GRED_DESTROY);
+	if (table->opt)
+		gred_offload(sch, TC_GRED_DESTROY);
 	kfree(table->opt);
 }
 
-- 
2.39.5

[PATCH 6.6 014/166] wifi: cfg80211: cancel wiphy_work before freeing wiphy

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit 72d520476a2fab6f3489e8388ab524985d6c4b90 ]

A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.

If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.

Fix this by canceling the work before freeing the wiphy.

Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 3c1247933ae92..a2b15349324b6 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -1151,6 +1151,13 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
 {
 	struct cfg80211_internal_bss *scan, *tmp;
 	struct cfg80211_beacon_registration *reg, *treg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rdev->wiphy_work_lock, flags);
+	WARN_ON(!list_empty(&rdev->wiphy_work_list));
+	spin_unlock_irqrestore(&rdev->wiphy_work_lock, flags);
+	cancel_work_sync(&rdev->wiphy_work);
+
 	rfkill_destroy(rdev->wiphy.rfkill);
 	list_for_each_entry_safe(reg, treg, &rdev->beacon_registrations, list) {
 		list_del(&reg->list);
-- 
2.39.5

[PATCH 6.6 015/166] Bluetooth: hci_event: Fix enabling passive scanning

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 0bdd88971519cfa8a76d1a4dde182e74cfbd5d5c ]

Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:

> HCI Event: LE Meta Event (0x3e) plen 29
      LE Connected Isochronous Stream Established (0x19)
        Status: Success (0x00)
        Connection Handle: 257
        CIG Synchronization Delay: 0 us (0x000000)
        CIS Synchronization Delay: 0 us (0x000000)
        Central to Peripheral Latency: 10000 us (0x002710)
        Peripheral to Central Latency: 10000 us (0x002710)
        Central to Peripheral PHY: LE 2M (0x02)
        Peripheral to Central PHY: LE 2M (0x02)
        Number of Subevents: 1
        Central to Peripheral Burst Number: 1
        Peripheral to Central Burst Number: 1
        Central to Peripheral Flush Timeout: 2
        Peripheral to Central Flush Timeout: 2
        Central to Peripheral MTU: 320
        Peripheral to Central MTU: 160
        ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
        Status: Success (0x00)
        Handle: 257
        Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
        Extended scan: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
        Duration: 0 msec (0x0000)
        Period: 0.00 sec (0x0000)

Fixes: 9fcb18ef3acb ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 01e51e1dc9b33..1e689d8c00a50 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3394,23 +3394,30 @@ static void hci_disconn_complete_evt(struct hci_dev *hdev, void *data,
 		hci_update_scan(hdev);
 	}
 
-	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
-	if (params) {
-		switch (params->auto_connect) {
-		case HCI_AUTO_CONN_LINK_LOSS:
-			if (ev->reason != HCI_ERROR_CONNECTION_TIMEOUT)
+	/* Re-enable passive scanning if disconnected device is marked
+	 * as auto-connectable.
+	 */
+	if (conn->type == LE_LINK) {
+		params = hci_conn_params_lookup(hdev, &conn->dst,
+						conn->dst_type);
+		if (params) {
+			switch (params->auto_connect) {
+			case HCI_AUTO_CONN_LINK_LOSS:
+				if (ev->reason != HCI_ERROR_CONNECTION_TIMEOUT)
+					break;
+				fallthrough;
+
+			case HCI_AUTO_CONN_DIRECT:
+			case HCI_AUTO_CONN_ALWAYS:
+				hci_pend_le_list_del_init(params);
+				hci_pend_le_list_add(params,
+						     &hdev->pend_le_conns);
+				hci_update_passive_scan(hdev);
 				break;
-			fallthrough;
 
-		case HCI_AUTO_CONN_DIRECT:
-		case HCI_AUTO_CONN_ALWAYS:
-			hci_pend_le_list_del_init(params);
-			hci_pend_le_list_add(params, &hdev->pend_le_conns);
-			hci_update_passive_scan(hdev);
-			break;
-
-		default:
-			break;
+			default:
+				break;
+			}
 		}
 	}
 
-- 
2.39.5

[PATCH 6.6 016/166] Revert "Bluetooth: hci_core: Fix sleeping function called from invalid context"

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit ab6ab707a4d060a51c45fc13e3b2228d5f7c0b87 ]

This reverts commit 4d94f05558271654670d18c26c912da0c1c15549 which has
problems (see [1]) and is no longer needed since 581dd2dc168f
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.

[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f0555827 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci_core.h | 108 +++++++++++--------------------
 net/bluetooth/hci_core.c         |  10 ++-
 net/bluetooth/iso.c              |   6 --
 net/bluetooth/l2cap_core.c       |  12 ++--
 net/bluetooth/rfcomm/core.c      |   6 --
 net/bluetooth/sco.c              |  12 ++--
 6 files changed, 57 insertions(+), 97 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 4fcee6b734b74..e9214ccfde2d7 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -800,6 +800,7 @@ struct hci_conn_params {
 extern struct list_head hci_dev_list;
 extern struct list_head hci_cb_list;
 extern rwlock_t hci_dev_list_lock;
+extern struct mutex hci_cb_list_lock;
 
 #define hci_dev_set_flag(hdev, nr)             set_bit((nr), (hdev)->dev_flags)
 #define hci_dev_clear_flag(hdev, nr)           clear_bit((nr), (hdev)->dev_flags)
@@ -1948,47 +1949,24 @@ struct hci_cb {
 
 	char *name;
 
-	bool (*match)		(struct hci_conn *conn);
 	void (*connect_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*disconn_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*security_cfm)	(struct hci_conn *conn, __u8 status,
-				 __u8 encrypt);
+								__u8 encrypt);
 	void (*key_change_cfm)	(struct hci_conn *conn, __u8 status);
 	void (*role_switch_cfm)	(struct hci_conn *conn, __u8 status, __u8 role);
 };
 
-static inline void hci_cb_lookup(struct hci_conn *conn, struct list_head *list)
-{
-	struct hci_cb *cb, *cpy;
-
-	rcu_read_lock();
-	list_for_each_entry_rcu(cb, &hci_cb_list, list) {
-		if (cb->match && cb->match(conn)) {
-			cpy = kmalloc(sizeof(*cpy), GFP_ATOMIC);
-			if (!cpy)
-				break;
-
-			*cpy = *cb;
-			INIT_LIST_HEAD(&cpy->list);
-			list_add_rcu(&cpy->list, list);
-		}
-	}
-	rcu_read_unlock();
-}
-
 static inline void hci_connect_cfm(struct hci_conn *conn, __u8 status)
 {
-	struct list_head list;
-	struct hci_cb *cb, *tmp;
-
-	INIT_LIST_HEAD(&list);
-	hci_cb_lookup(conn, &list);
+	struct hci_cb *cb;
 
-	list_for_each_entry_safe(cb, tmp, &list, list) {
+	mutex_lock(&hci_cb_list_lock);
+	list_for_each_entry(cb, &hci_cb_list, list) {
 		if (cb->connect_cfm)
 			cb->connect_cfm(conn, status);
-		kfree(cb);
 	}
+	mutex_unlock(&hci_cb_list_lock);
 
 	if (conn->connect_cfm_cb)
 		conn->connect_cfm_cb(conn, status);
@@ -1996,43 +1974,22 @@ static inline void hci_connect_cfm(struct hci_conn *conn, __u8 status)
 
 static inline void hci_disconn_cfm(struct hci_conn *conn, __u8 reason)
 {
-	struct list_head list;
-	struct hci_cb *cb, *tmp;
-
-	INIT_LIST_HEAD(&list);
-	hci_cb_lookup(conn, &list);
+	struct hci_cb *cb;
 
-	list_for_each_entry_safe(cb, tmp, &list, list) {
+	mutex_lock(&hci_cb_list_lock);
+	list_for_each_entry(cb, &hci_cb_list, list) {
 		if (cb->disconn_cfm)
 			cb->disconn_cfm(conn, reason);
-		kfree(cb);
 	}
+	mutex_unlock(&hci_cb_list_lock);
 
 	if (conn->disconn_cfm_cb)
 		conn->disconn_cfm_cb(conn, reason);
 }
 
-static inline void hci_security_cfm(struct hci_conn *conn, __u8 status,
-				    __u8 encrypt)
-{
-	struct list_head list;
-	struct hci_cb *cb, *tmp;
-
-	INIT_LIST_HEAD(&list);
-	hci_cb_lookup(conn, &list);
-
-	list_for_each_entry_safe(cb, tmp, &list, list) {
-		if (cb->security_cfm)
-			cb->security_cfm(conn, status, encrypt);
-		kfree(cb);
-	}
-
-	if (conn->security_cfm_cb)
-		conn->security_cfm_cb(conn, status);
-}
-
 static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
 {
+	struct hci_cb *cb;
 	__u8 encrypt;
 
 	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
@@ -2040,11 +1997,20 @@ static inline void hci_auth_cfm(struct hci_conn *conn, __u8 status)
 
 	encrypt = test_bit(HCI_CONN_ENCRYPT, &conn->flags) ? 0x01 : 0x00;
 
-	hci_security_cfm(conn, status, encrypt);
+	mutex_lock(&hci_cb_list_lock);
+	list_for_each_entry(cb, &hci_cb_list, list) {
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
+	}
+	mutex_unlock(&hci_cb_list_lock);
+
+	if (conn->security_cfm_cb)
+		conn->security_cfm_cb(conn, status);
 }
 
 static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status)
 {
+	struct hci_cb *cb;
 	__u8 encrypt;
 
 	if (conn->state == BT_CONFIG) {
@@ -2071,38 +2037,40 @@ static inline void hci_encrypt_cfm(struct hci_conn *conn, __u8 status)
 			conn->sec_level = conn->pending_sec_level;
 	}
 
-	hci_security_cfm(conn, status, encrypt);
+	mutex_lock(&hci_cb_list_lock);
+	list_for_each_entry(cb, &hci_cb_list, list) {
+		if (cb->security_cfm)
+			cb->security_cfm(conn, status, encrypt);
+	}
+	mutex_unlock(&hci_cb_list_lock);
+
+	if (conn->security_cfm_cb)
+		conn->security_cfm_cb(conn, status);
 }
 
 static inline void hci_key_change_cfm(struct hci_conn *conn, __u8 status)
 {
-	struct list_head list;
-	struct hci_cb *cb, *tmp;
-
-	INIT_LIST_HEAD(&list);
-	hci_cb_lookup(conn, &list);
+	struct hci_cb *cb;
 
-	list_for_each_entry_safe(cb, tmp, &list, list) {
+	mutex_lock(&hci_cb_list_lock);
+	list_for_each_entry(cb, &hci_cb_list, list) {
 		if (cb->key_change_cfm)
 			cb->key_change_cfm(conn, status);
-		kfree(cb);
 	}
+	mutex_unlock(&hci_cb_list_lock);
 }
 
 static inline void hci_role_switch_cfm(struct hci_conn *conn, __u8 status,
 								__u8 role)
 {
-	struct list_head list;
-	struct hci_cb *cb, *tmp;
-
-	INIT_LIST_HEAD(&list);
-	hci_cb_lookup(conn, &list);
+	struct hci_cb *cb;
 
-	list_for_each_entry_safe(cb, tmp, &list, list) {
+	mutex_lock(&hci_cb_list_lock);
+	list_for_each_entry(cb, &hci_cb_list, list) {
 		if (cb->role_switch_cfm)
 			cb->role_switch_cfm(conn, status, role);
-		kfree(cb);
 	}
+	mutex_unlock(&hci_cb_list_lock);
 }
 
 static inline bool hci_bdaddr_is_rpa(bdaddr_t *bdaddr, u8 addr_type)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index f29fd32644011..30519d47e8a69 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -58,6 +58,7 @@ DEFINE_RWLOCK(hci_dev_list_lock);
 
 /* HCI callback list */
 LIST_HEAD(hci_cb_list);
+DEFINE_MUTEX(hci_cb_list_lock);
 
 /* HCI ID Numbering */
 static DEFINE_IDA(hci_index_ida);
@@ -2956,7 +2957,9 @@ int hci_register_cb(struct hci_cb *cb)
 {
 	BT_DBG("%p name %s", cb, cb->name);
 
-	list_add_tail_rcu(&cb->list, &hci_cb_list);
+	mutex_lock(&hci_cb_list_lock);
+	list_add_tail(&cb->list, &hci_cb_list);
+	mutex_unlock(&hci_cb_list_lock);
 
 	return 0;
 }
@@ -2966,8 +2969,9 @@ int hci_unregister_cb(struct hci_cb *cb)
 {
 	BT_DBG("%p name %s", cb, cb->name);
 
-	list_del_rcu(&cb->list);
-	synchronize_rcu();
+	mutex_lock(&hci_cb_list_lock);
+	list_del(&cb->list);
+	mutex_unlock(&hci_cb_list_lock);
 
 	return 0;
 }
diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c
index f165cafa3aa98..b94d202bf3745 100644
--- a/net/bluetooth/iso.c
+++ b/net/bluetooth/iso.c
@@ -1929,11 +1929,6 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags)
 	return lm;
 }
 
-static bool iso_match(struct hci_conn *hcon)
-{
-	return hcon->type == ISO_LINK || hcon->type == LE_LINK;
-}
-
 static void iso_connect_cfm(struct hci_conn *hcon, __u8 status)
 {
 	if (hcon->type != ISO_LINK) {
@@ -2115,7 +2110,6 @@ void iso_recv(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 
 static struct hci_cb iso_cb = {
 	.name		= "ISO",
-	.match		= iso_match,
 	.connect_cfm	= iso_connect_cfm,
 	.disconn_cfm	= iso_disconn_cfm,
 };
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 304ebb31cebba..76a85d8b17574 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -7228,11 +7228,6 @@ static struct l2cap_chan *l2cap_global_fixed_chan(struct l2cap_chan *c,
 	return NULL;
 }
 
-static bool l2cap_match(struct hci_conn *hcon)
-{
-	return hcon->type == ACL_LINK || hcon->type == LE_LINK;
-}
-
 static void l2cap_connect_cfm(struct hci_conn *hcon, u8 status)
 {
 	struct hci_dev *hdev = hcon->hdev;
@@ -7240,6 +7235,9 @@ static void l2cap_connect_cfm(struct hci_conn *hcon, u8 status)
 	struct l2cap_chan *pchan;
 	u8 dst_type;
 
+	if (hcon->type != ACL_LINK && hcon->type != LE_LINK)
+		return;
+
 	BT_DBG("hcon %p bdaddr %pMR status %d", hcon, &hcon->dst, status);
 
 	if (status) {
@@ -7304,6 +7302,9 @@ int l2cap_disconn_ind(struct hci_conn *hcon)
 
 static void l2cap_disconn_cfm(struct hci_conn *hcon, u8 reason)
 {
+	if (hcon->type != ACL_LINK && hcon->type != LE_LINK)
+		return;
+
 	BT_DBG("hcon %p reason %d", hcon, reason);
 
 	l2cap_conn_del(hcon, bt_to_errno(reason));
@@ -7582,7 +7583,6 @@ void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 
 static struct hci_cb l2cap_cb = {
 	.name		= "L2CAP",
-	.match		= l2cap_match,
 	.connect_cfm	= l2cap_connect_cfm,
 	.disconn_cfm	= l2cap_disconn_cfm,
 	.security_cfm	= l2cap_security_cfm,
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 9d46afb24caf0..1d34d84970332 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2134,11 +2134,6 @@ static int rfcomm_run(void *unused)
 	return 0;
 }
 
-static bool rfcomm_match(struct hci_conn *hcon)
-{
-	return hcon->type == ACL_LINK;
-}
-
 static void rfcomm_security_cfm(struct hci_conn *conn, u8 status, u8 encrypt)
 {
 	struct rfcomm_session *s;
@@ -2185,7 +2180,6 @@ static void rfcomm_security_cfm(struct hci_conn *conn, u8 status, u8 encrypt)
 
 static struct hci_cb rfcomm_cb = {
 	.name		= "RFCOMM",
-	.match		= rfcomm_match,
 	.security_cfm	= rfcomm_security_cfm
 };
 
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index c4c36ff25fb20..64d4d57c7033a 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -1353,13 +1353,11 @@ int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags)
 	return lm;
 }
 
-static bool sco_match(struct hci_conn *hcon)
-{
-	return hcon->type == SCO_LINK || hcon->type == ESCO_LINK;
-}
-
 static void sco_connect_cfm(struct hci_conn *hcon, __u8 status)
 {
+	if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
+		return;
+
 	BT_DBG("hcon %p bdaddr %pMR status %u", hcon, &hcon->dst, status);
 
 	if (!status) {
@@ -1374,6 +1372,9 @@ static void sco_connect_cfm(struct hci_conn *hcon, __u8 status)
 
 static void sco_disconn_cfm(struct hci_conn *hcon, __u8 reason)
 {
+	if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
+		return;
+
 	BT_DBG("hcon %p reason %d", hcon, reason);
 
 	sco_conn_del(hcon, bt_to_errno(reason));
@@ -1399,7 +1400,6 @@ void sco_recv_scodata(struct hci_conn *hcon, struct sk_buff *skb)
 
 static struct hci_cb sco_cb = {
 	.name		= "SCO",
-	.match		= sco_match,
 	.connect_cfm	= sco_connect_cfm,
 	.disconn_cfm	= sco_disconn_cfm,
 };
-- 
2.39.5

[PATCH 6.6 017/166] net/mlx5: Fill out devlink dev info only for PFs

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Pirko <jiri@nvidia.com>

[ Upstream commit d749d901b2168389f060b654fdaa08acf6b367d2 ]

Firmware version query is supported on the PFs. Due to this
following kernel warning log is observed:

[  188.590344] mlx5_core 0000:08:00.2: mlx5_fw_version_query:816:(pid 1453): fw query isn't supported by the FW

Fix it by restricting the query and devlink info to the PF.

Fixes: 8338d9378895 ("net/mlx5: Added devlink info callback")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20250306212529.429329-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/devlink.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index 1bccb5633ab4b..f66788a2ed77e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -46,6 +46,9 @@ mlx5_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
 	u32 running_fw, stored_fw;
 	int err;
 
+	if (!mlx5_core_is_pf(dev))
+		return 0;
+
 	err = devlink_info_version_fixed_put(req, "fw.psid", dev->board_id);
 	if (err)
 		return err;
-- 
2.39.5

[PATCH 6.6 018/166] net: dsa: mv88e6xxx: Verify after ATU Load ops

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joseph Huang <Joseph.Huang@garmin.com>

[ Upstream commit dc5340c3133a3ebe54853fd299116149e528cfaa ]

ATU Load operations could fail silently if there's not enough space
on the device to hold the new entry. When this happens, the symptom
depends on the unknown flood settings. If unknown multicast flood is
disabled, the multicast packets are dropped when the ATU table is
full. If unknown multicast flood is enabled, the multicast packets
will be flooded to all ports. Either way, IGMP snooping is broken
when the ATU Load operation fails silently.

Do a Read-After-Write verification after each fdb/mdb add operation
to make sure that the operation was really successful, and return
-ENOSPC otherwise.

Fixes: defb05b9b9b4 ("net: dsa: mv88e6xxx: Add support for fdb_add, fdb_del, and fdb_getnext")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250306172306.3859214-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 59 ++++++++++++++++++++++++++------
 1 file changed, 48 insertions(+), 11 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 062bcbe6255cf..a39b33353ca6c 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2125,13 +2125,11 @@ mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
 	return err;
 }
 
-static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port,
-					const unsigned char *addr, u16 vid,
-					u8 state)
+static int mv88e6xxx_port_db_get(struct mv88e6xxx_chip *chip,
+				 const unsigned char *addr, u16 vid,
+				 u16 *fid, struct mv88e6xxx_atu_entry *entry)
 {
-	struct mv88e6xxx_atu_entry entry;
 	struct mv88e6xxx_vtu_entry vlan;
-	u16 fid;
 	int err;
 
 	/* Ports have two private address databases: one for when the port is
@@ -2142,7 +2140,7 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port,
 	 * VLAN ID into the port's database used for VLAN-unaware bridging.
 	 */
 	if (vid == 0) {
-		fid = MV88E6XXX_FID_BRIDGED;
+		*fid = MV88E6XXX_FID_BRIDGED;
 	} else {
 		err = mv88e6xxx_vtu_get(chip, vid, &vlan);
 		if (err)
@@ -2152,14 +2150,39 @@ static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port,
 		if (!vlan.valid)
 			return -EOPNOTSUPP;
 
-		fid = vlan.fid;
+		*fid = vlan.fid;
 	}
 
-	entry.state = 0;
-	ether_addr_copy(entry.mac, addr);
-	eth_addr_dec(entry.mac);
+	entry->state = 0;
+	ether_addr_copy(entry->mac, addr);
+	eth_addr_dec(entry->mac);
+
+	return mv88e6xxx_g1_atu_getnext(chip, *fid, entry);
+}
+
+static bool mv88e6xxx_port_db_find(struct mv88e6xxx_chip *chip,
+				   const unsigned char *addr, u16 vid)
+{
+	struct mv88e6xxx_atu_entry entry;
+	u16 fid;
+	int err;
 
-	err = mv88e6xxx_g1_atu_getnext(chip, fid, &entry);
+	err = mv88e6xxx_port_db_get(chip, addr, vid, &fid, &entry);
+	if (err)
+		return false;
+
+	return entry.state && ether_addr_equal(entry.mac, addr);
+}
+
+static int mv88e6xxx_port_db_load_purge(struct mv88e6xxx_chip *chip, int port,
+					const unsigned char *addr, u16 vid,
+					u8 state)
+{
+	struct mv88e6xxx_atu_entry entry;
+	u16 fid;
+	int err;
+
+	err = mv88e6xxx_port_db_get(chip, addr, vid, &fid, &entry);
 	if (err)
 		return err;
 
@@ -2757,6 +2780,13 @@ static int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
 	mv88e6xxx_reg_lock(chip);
 	err = mv88e6xxx_port_db_load_purge(chip, port, addr, vid,
 					   MV88E6XXX_G1_ATU_DATA_STATE_UC_STATIC);
+	if (err)
+		goto out;
+
+	if (!mv88e6xxx_port_db_find(chip, addr, vid))
+		err = -ENOSPC;
+
+out:
 	mv88e6xxx_reg_unlock(chip);
 
 	return err;
@@ -6454,6 +6484,13 @@ static int mv88e6xxx_port_mdb_add(struct dsa_switch *ds, int port,
 	mv88e6xxx_reg_lock(chip);
 	err = mv88e6xxx_port_db_load_purge(chip, port, mdb->addr, mdb->vid,
 					   MV88E6XXX_G1_ATU_DATA_STATE_MC_STATIC);
+	if (err)
+		goto out;
+
+	if (!mv88e6xxx_port_db_find(chip, mdb->addr, mdb->vid))
+		err = -ENOSPC;
+
+out:
 	mv88e6xxx_reg_unlock(chip);
 
 	return err;
-- 
2.39.5

[PATCH 6.6 019/166] net: mctp i2c: Copy headers if cloned

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Johnston <matt@codeconstruct.com.au>

[ Upstream commit df8ce77ba8b7c012a3edd1ca7368b46831341466 ]

Use skb_cow_head() prior to modifying the TX SKB. This is necessary
when the SKB has been cloned, to avoid modifying other shared clones.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Link: https://patch.msgid.link/20250306-matt-mctp-i2c-cow-v1-1-293827212681@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mctp/mctp-i2c.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/mctp/mctp-i2c.c b/drivers/net/mctp/mctp-i2c.c
index 20b8d7d528baf..fbe8483a07b58 100644
--- a/drivers/net/mctp/mctp-i2c.c
+++ b/drivers/net/mctp/mctp-i2c.c
@@ -543,6 +543,7 @@ static int mctp_i2c_header_create(struct sk_buff *skb, struct net_device *dev,
 	struct mctp_i2c_hdr *hdr;
 	struct mctp_hdr *mhdr;
 	u8 lldst, llsrc;
+	int rc;
 
 	if (len > MCTP_I2C_MAXMTU)
 		return -EMSGSIZE;
@@ -553,6 +554,10 @@ static int mctp_i2c_header_create(struct sk_buff *skb, struct net_device *dev,
 	lldst = *((u8 *)daddr);
 	llsrc = *((u8 *)saddr);
 
+	rc = skb_cow_head(skb, sizeof(struct mctp_i2c_hdr));
+	if (rc)
+		return rc;
+
 	skb_push(skb, sizeof(struct mctp_i2c_hdr));
 	skb_reset_mac_header(skb);
 	hdr = (void *)skb_mac_header(skb);
-- 
2.39.5

[PATCH 6.6 020/166] netpoll: hold rcu read lock in __netpoll_send_skb()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Breno Leitao <leitao@debian.org>

[ Upstream commit 505ead7ab77f289f12d8a68ac83da068e4d4408b ]

The function __netpoll_send_skb() is being invoked without holding the
RCU read lock. This oversight triggers a warning message when
CONFIG_PROVE_RCU_LIST is enabled:

	net/core/netpoll.c:330 suspicious rcu_dereference_check() usage!

	 netpoll_send_skb
	 netpoll_send_udp
	 write_ext_msg
	 console_flush_all
	 console_unlock
	 vprintk_emit

To prevent npinfo from disappearing unexpectedly, ensure that
__netpoll_send_skb() is protected with the RCU read lock.

Fixes: 2899656b494dcd1 ("netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306-netpoll_rcu_v2-v2-1-bc4f5c51742a@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/netpoll.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 1791462f1600a..1a4d2a61b060b 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -326,6 +326,7 @@ static int netpoll_owner_active(struct net_device *dev)
 static netdev_tx_t __netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
 {
 	netdev_tx_t status = NETDEV_TX_BUSY;
+	netdev_tx_t ret = NET_XMIT_DROP;
 	struct net_device *dev;
 	unsigned long tries;
 	/* It is up to the caller to keep npinfo alive. */
@@ -334,11 +335,12 @@ static netdev_tx_t __netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
 	lockdep_assert_irqs_disabled();
 
 	dev = np->dev;
+	rcu_read_lock();
 	npinfo = rcu_dereference_bh(dev->npinfo);
 
 	if (!npinfo || !netif_running(dev) || !netif_device_present(dev)) {
 		dev_kfree_skb_irq(skb);
-		return NET_XMIT_DROP;
+		goto out;
 	}
 
 	/* don't get messages out of order, and no recursion */
@@ -377,7 +379,10 @@ static netdev_tx_t __netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
 		skb_queue_tail(&npinfo->txq, skb);
 		schedule_delayed_work(&npinfo->tx_work,0);
 	}
-	return NETDEV_TX_OK;
+	ret = NETDEV_TX_OK;
+out:
+	rcu_read_unlock();
+	return ret;
 }
 
 netdev_tx_t netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
-- 
2.39.5

[PATCH 6.6 021/166] drm/hyperv: Fix address space leak when Hyper-V DRM device is removed

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Kelley <mhklinux@outlook.com>

[ Upstream commit aed709355fd05ef747e1af24a1d5d78cd7feb81e ]

When a Hyper-V DRM device is probed, the driver allocates MMIO space for
the vram, and maps it cacheable. If the device removed, or in the error
path for device probing, the MMIO space is released but no unmap is done.
Consequently the kernel address space for the mapping is leaked.

Fix this by adding iounmap() calls in the device removal path, and in the
error path during device probing.

Fixes: f1f63cbb705d ("drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()")
Fixes: a0ab5abced55 ("drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250210193441.2414-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250210193441.2414-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/hyperv/hyperv_drm_drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_drv.c b/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
index 8026118c6e033..8a7933f5c6ebe 100644
--- a/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
+++ b/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
@@ -157,6 +157,7 @@ static int hyperv_vmbus_probe(struct hv_device *hdev,
 	return 0;
 
 err_free_mmio:
+	iounmap(hv->vram);
 	vmbus_free_mmio(hv->mem->start, hv->fb_size);
 err_vmbus_close:
 	vmbus_close(hdev->channel);
@@ -175,6 +176,7 @@ static void hyperv_vmbus_remove(struct hv_device *hdev)
 	vmbus_close(hdev->channel);
 	hv_set_drvdata(hdev, NULL);
 
+	iounmap(hv->vram);
 	vmbus_free_mmio(hv->mem->start, hv->fb_size);
 }
 
-- 
2.39.5

[PATCH 6.6 022/166] Drivers: hv: vmbus: Dont release fb_mmio resource in vmbus_free_mmio()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Kelley <mhklinux@outlook.com>

[ Upstream commit 73fe9073c0cc28056cb9de0c8a516dac070f1d1f ]

The VMBus driver manages the MMIO space it owns via the hyperv_mmio
resource tree. Because the synthetic video framebuffer portion of the
MMIO space is initially setup by the Hyper-V host for each guest, the
VMBus driver does an early reserve of that portion of MMIO space in the
hyperv_mmio resource tree. It saves a pointer to that resource in
fb_mmio. When a VMBus driver requests MMIO space and passes "true"
for the "fb_overlap_ok" argument, the reserved framebuffer space is
used if possible. In that case it's not necessary to do another request
against the "shadow" hyperv_mmio resource tree because that resource
was already requested in the early reserve steps.

However, the vmbus_free_mmio() function currently does no special
handling for the fb_mmio resource. When a framebuffer device is
removed, or the driver is unbound, the current code for
vmbus_free_mmio() releases the reserved resource, leaving fb_mmio
pointing to memory that has been freed. If the same or another
driver is subsequently bound to the device, vmbus_allocate_mmio()
checks against fb_mmio, and potentially gets garbage. Furthermore
a second unbind operation produces this "nonexistent resource" error
because of the unbalanced behavior between vmbus_allocate_mmio() and
vmbus_free_mmio():

[   55.499643] resource: Trying to free nonexistent
			resource <0x00000000f0000000-0x00000000f07fffff>

Fix this by adding logic to vmbus_free_mmio() to recognize when
MMIO space in the fb_mmio reserved area would be released, and don't
release it. This filtering ensures the fb_mmio resource always exists,
and makes vmbus_free_mmio() more parallel with vmbus_allocate_mmio().

Fixes: be000f93e5d7 ("drivers:hv: Track allocations of children of hv_vmbus in private resource tree")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250310035208.275764-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250310035208.275764-1-mhklinux@outlook.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/vmbus_drv.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 756aebf324735..c54d759b07384 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -2242,12 +2242,25 @@ void vmbus_free_mmio(resource_size_t start, resource_size_t size)
 	struct resource *iter;
 
 	mutex_lock(&hyperv_mmio_lock);
+
+	/*
+	 * If all bytes of the MMIO range to be released are within the
+	 * special case fb_mmio shadow region, skip releasing the shadow
+	 * region since no corresponding __request_region() was done
+	 * in vmbus_allocate_mmio().
+	 */
+	if (fb_mmio && start >= fb_mmio->start &&
+	    (start + size - 1 <= fb_mmio->end))
+		goto skip_shadow_release;
+
 	for (iter = hyperv_mmio; iter; iter = iter->sibling) {
 		if ((iter->start >= start + size) || (iter->end <= start))
 			continue;
 
 		__release_region(iter, start, size);
 	}
+
+skip_shadow_release:
 	release_mem_region(start, size);
 	mutex_unlock(&hyperv_mmio_lock);
 
-- 
2.39.5

[PATCH 6.6 023/166] net/mlx5: handle errors in mlx5_chains_create_table()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wentao Liang <vulab@iscas.ac.cn>

[ Upstream commit eab0396353be1c778eba1c0b5180176f04dd21ce ]

In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns()
and mlx5_get_flow_namespace() must be checked to prevent NULL pointer
dereferences. If either function fails, the function should log error
message with mlx5_core_warn() and return error pointer.

Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307021820.2646-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
index a80ecb672f33d..711d14dea2485 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/fs_chains.c
@@ -196,6 +196,11 @@ mlx5_chains_create_table(struct mlx5_fs_chains *chains,
 		ns = mlx5_get_flow_namespace(chains->dev, chains->ns);
 	}
 
+	if (!ns) {
+		mlx5_core_warn(chains->dev, "Failed to get flow namespace\n");
+		return ERR_PTR(-EOPNOTSUPP);
+	}
+
 	ft_attr.autogroup.num_reserved_entries = 2;
 	ft_attr.autogroup.max_num_groups = chains->group_num;
 	ft = mlx5_create_auto_grouped_flow_table(ns, &ft_attr);
-- 
2.39.5

[PATCH 6.6 024/166] eth: bnxt: do not update checksum in bnxt_xdp_build_skb()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit c03e7d05aa0e2f7e9a9ce5ad8a12471a53f941dc ]

The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload
is enabled.
When the XDP-MB program is attached and it returns XDP_PASS, the
bnxt_xdp_build_skb() is called to update skb_shared_info.
The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info,
but it updates ip_summed value too if checksum offload is enabled.
This is actually duplicate work.

When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed
is CHECKSUM_NONE or not.
It means that ip_summed should be CHECKSUM_NONE at this moment.
But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the
XDP-MB-PASS path.
So the by skb_checksum_none_assert() WARNS about it.

This is duplicate work and updating ip_summed in the
bnxt_xdp_build_skb() is not needed.

Splat looks like:
WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en]
Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_]
CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G        W          6.14.0-rc4+ #27
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en]
Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f
RSP: 0018:ffff88881ba09928 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000
RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8
RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070
R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080
R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000
FS:  00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
 <IRQ>
 ? __warn+0xcd/0x2f0
 ? bnxt_rx_pkt+0x479b/0x7610
 ? report_bug+0x326/0x3c0
 ? handle_bug+0x53/0xa0
 ? exc_invalid_op+0x14/0x50
 ? asm_exc_invalid_op+0x16/0x20
 ? bnxt_rx_pkt+0x479b/0x7610
 ? bnxt_rx_pkt+0x3e41/0x7610
 ? __pfx_bnxt_rx_pkt+0x10/0x10
 ? napi_complete_done+0x2cf/0x7d0
 __bnxt_poll_work+0x4e8/0x1220
 ? __pfx___bnxt_poll_work+0x10/0x10
 ? __pfx_mark_lock.part.0+0x10/0x10
 bnxt_poll_p5+0x36a/0xfa0
 ? __pfx_bnxt_poll_p5+0x10/0x10
 __napi_poll.constprop.0+0xa0/0x440
 net_rx_action+0x899/0xd00
...

Following ping.py patch adds xdp-mb-pass case. so ping.py is going
to be able to reproduce this issue.

Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250309134219.91670-5-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  3 ++-
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 11 ++---------
 drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h |  3 +--
 3 files changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index c440f4d8d43a2..915ef1062d714 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1958,7 +1958,8 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
 			if (!skb)
 				goto oom_next_rx;
 		} else {
-			skb = bnxt_xdp_build_skb(bp, skb, agg_bufs, rxr->page_pool, &xdp, rxcmp1);
+			skb = bnxt_xdp_build_skb(bp, skb, agg_bufs,
+						 rxr->page_pool, &xdp);
 			if (!skb) {
 				/* we should be able to free the old skb here */
 				bnxt_xdp_buff_frags_free(rxr, &xdp);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
index 2845796f782c2..758f51366ef03 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
@@ -462,20 +462,13 @@ int bnxt_xdp(struct net_device *dev, struct netdev_bpf *xdp)
 
 struct sk_buff *
 bnxt_xdp_build_skb(struct bnxt *bp, struct sk_buff *skb, u8 num_frags,
-		   struct page_pool *pool, struct xdp_buff *xdp,
-		   struct rx_cmp_ext *rxcmp1)
+		   struct page_pool *pool, struct xdp_buff *xdp)
 {
 	struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
 
 	if (!skb)
 		return NULL;
-	skb_checksum_none_assert(skb);
-	if (RX_CMP_L4_CS_OK(rxcmp1)) {
-		if (bp->dev->features & NETIF_F_RXCSUM) {
-			skb->ip_summed = CHECKSUM_UNNECESSARY;
-			skb->csum_level = RX_CMP_ENCAP(rxcmp1);
-		}
-	}
+
 	xdp_update_skb_shared_info(skb, num_frags,
 				   sinfo->xdp_frags_size,
 				   BNXT_RX_PAGE_SIZE * sinfo->nr_frags,
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h
index 5e412c5655ba5..9f5829a0adeb1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.h
@@ -33,6 +33,5 @@ void bnxt_xdp_buff_frags_free(struct bnxt_rx_ring_info *rxr,
 			      struct xdp_buff *xdp);
 struct sk_buff *bnxt_xdp_build_skb(struct bnxt *bp, struct sk_buff *skb,
 				   u8 num_frags, struct page_pool *pool,
-				   struct xdp_buff *xdp,
-				   struct rx_cmp_ext *rxcmp1);
+				   struct xdp_buff *xdp);
 #endif
-- 
2.39.5

[PATCH 6.6 025/166] net: switchdev: Convert blocking notification chain to a raw one

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amit Cohen <amcohen@nvidia.com>

[ Upstream commit 62531a1effa87bdab12d5104015af72e60d926ff ]

A blocking notification chain uses a read-write semaphore to protect the
integrity of the chain. The semaphore is acquired for writing when
adding / removing notifiers to / from the chain and acquired for reading
when traversing the chain and informing notifiers about an event.

In case of the blocking switchdev notification chain, recursive
notifications are possible which leads to the semaphore being acquired
twice for reading and to lockdep warnings being generated [1].

Specifically, this can happen when the bridge driver processes a
SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications
about deferred events when calling switchdev_deferred_process().

Fix this by converting the notification chain to a raw notification
chain in a similar fashion to the netdev notification chain. Protect
the chain using the RTNL mutex by acquiring it when modifying the chain.
Events are always informed under the RTNL mutex, but add an assertion in
call_switchdev_blocking_notifiers() to make sure this is not violated in
the future.

Maintain the "blocking" prefix as events are always emitted from process
context and listeners are allowed to block.

[1]:
WARNING: possible recursive locking detected
6.14.0-rc4-custom-g079270089484 #1 Not tainted
--------------------------------------------
ip/52731 is trying to acquire lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0

but task is already holding lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0

other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((switchdev_blocking_notif_chain).rwsem);
lock((switchdev_blocking_notif_chain).rwsem);

*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ip/52731:
 #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0
 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0
 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0

stack backtrace:
...
? __pfx_down_read+0x10/0x10
? __pfx_mark_lock+0x10/0x10
? __pfx_switchdev_port_attr_set_deferred+0x10/0x10
blocking_notifier_call_chain+0x58/0xa0
switchdev_port_attr_notify.constprop.0+0xb3/0x1b0
? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10
? mark_held_locks+0x94/0xe0
? switchdev_deferred_process+0x11a/0x340
switchdev_port_attr_set_deferred+0x27/0xd0
switchdev_deferred_process+0x164/0x340
br_switchdev_port_unoffload+0xc8/0x100 [bridge]
br_switchdev_blocking_event+0x29f/0x580 [bridge]
notifier_call_chain+0xa2/0x440
blocking_notifier_call_chain+0x6e/0xa0
switchdev_bridge_port_unoffload+0xde/0x1a0
...

Fixes: f7a70d650b0b6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/switchdev/switchdev.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c
index c9189a970eec3..fb0e65c89525d 100644
--- a/net/switchdev/switchdev.c
+++ b/net/switchdev/switchdev.c
@@ -381,7 +381,7 @@ bool switchdev_port_obj_act_is_deferred(struct net_device *dev,
 EXPORT_SYMBOL_GPL(switchdev_port_obj_act_is_deferred);
 
 static ATOMIC_NOTIFIER_HEAD(switchdev_notif_chain);
-static BLOCKING_NOTIFIER_HEAD(switchdev_blocking_notif_chain);
+static RAW_NOTIFIER_HEAD(switchdev_blocking_notif_chain);
 
 /**
  *	register_switchdev_notifier - Register notifier
@@ -427,17 +427,27 @@ EXPORT_SYMBOL_GPL(call_switchdev_notifiers);
 
 int register_switchdev_blocking_notifier(struct notifier_block *nb)
 {
-	struct blocking_notifier_head *chain = &switchdev_blocking_notif_chain;
+	struct raw_notifier_head *chain = &switchdev_blocking_notif_chain;
+	int err;
+
+	rtnl_lock();
+	err = raw_notifier_chain_register(chain, nb);
+	rtnl_unlock();
 
-	return blocking_notifier_chain_register(chain, nb);
+	return err;
 }
 EXPORT_SYMBOL_GPL(register_switchdev_blocking_notifier);
 
 int unregister_switchdev_blocking_notifier(struct notifier_block *nb)
 {
-	struct blocking_notifier_head *chain = &switchdev_blocking_notif_chain;
+	struct raw_notifier_head *chain = &switchdev_blocking_notif_chain;
+	int err;
 
-	return blocking_notifier_chain_unregister(chain, nb);
+	rtnl_lock();
+	err = raw_notifier_chain_unregister(chain, nb);
+	rtnl_unlock();
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(unregister_switchdev_blocking_notifier);
 
@@ -445,10 +455,11 @@ int call_switchdev_blocking_notifiers(unsigned long val, struct net_device *dev,
 				      struct switchdev_notifier_info *info,
 				      struct netlink_ext_ack *extack)
 {
+	ASSERT_RTNL();
 	info->dev = dev;
 	info->extack = extack;
-	return blocking_notifier_call_chain(&switchdev_blocking_notif_chain,
-					    val, info);
+	return raw_notifier_call_chain(&switchdev_blocking_notif_chain,
+				       val, info);
 }
 EXPORT_SYMBOL_GPL(call_switchdev_blocking_notifiers);
 
-- 
2.39.5

[PATCH 6.6 026/166] bonding: fix incorrect MAC address setting to receive NS messages

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 0c5e145a350de3b38cd5ae77a401b12c46fb7c1d ]

When validation on the backup slave is enabled, we need to validate the
Neighbor Solicitation (NS) messages received on the backup slave. To
receive these messages, the correct destination MAC address must be added
to the slave. However, the target in bonding is a unicast address, which
we cannot use directly. Instead, we should first convert it to a
Solicited-Node Multicast Address and then derive the corresponding MAC
address.

Fix the incorrect MAC address setting on both slave_set_ns_maddr() and
slave_set_ns_maddrs(). Since the two function names are similar. Add
some description for the functions. Also only use one mac_addr variable
in slave_set_ns_maddr() to save some code and logic.

Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_options.c | 55 +++++++++++++++++++++++++-----
 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 8c326e41b8d63..6d003c0ef6698 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -1226,10 +1226,28 @@ static bool slave_can_set_ns_maddr(const struct bonding *bond, struct slave *sla
 	       slave->dev->flags & IFF_MULTICAST;
 }
 
+/**
+ * slave_set_ns_maddrs - add/del all NS mac addresses for slave
+ * @bond: bond device
+ * @slave: slave device
+ * @add: add or remove all the NS mac addresses
+ *
+ * This function tries to add or delete all the NS mac addresses on the slave
+ *
+ * Note, the IPv6 NS target address is the unicast address in Neighbor
+ * Solicitation (NS) message. The dest address of NS message should be
+ * solicited-node multicast address of the target. The dest mac of NS message
+ * is converted from the solicited-node multicast address.
+ *
+ * This function is called when
+ *   * arp_validate changes
+ *   * enslaving, releasing new slaves
+ */
 static void slave_set_ns_maddrs(struct bonding *bond, struct slave *slave, bool add)
 {
 	struct in6_addr *targets = bond->params.ns_targets;
 	char slot_maddr[MAX_ADDR_LEN];
+	struct in6_addr mcaddr;
 	int i;
 
 	if (!slave_can_set_ns_maddr(bond, slave))
@@ -1239,7 +1257,8 @@ static void slave_set_ns_maddrs(struct bonding *bond, struct slave *slave, bool
 		if (ipv6_addr_any(&targets[i]))
 			break;
 
-		if (!ndisc_mc_map(&targets[i], slot_maddr, slave->dev, 0)) {
+		addrconf_addr_solict_mult(&targets[i], &mcaddr);
+		if (!ndisc_mc_map(&mcaddr, slot_maddr, slave->dev, 0)) {
 			if (add)
 				dev_mc_add(slave->dev, slot_maddr);
 			else
@@ -1262,23 +1281,43 @@ void bond_slave_ns_maddrs_del(struct bonding *bond, struct slave *slave)
 	slave_set_ns_maddrs(bond, slave, false);
 }
 
+/**
+ * slave_set_ns_maddr - set new NS mac address for slave
+ * @bond: bond device
+ * @slave: slave device
+ * @target: the new IPv6 target
+ * @slot: the old IPv6 target in the slot
+ *
+ * This function tries to replace the old mac address to new one on the slave.
+ *
+ * Note, the target/slot IPv6 address is the unicast address in Neighbor
+ * Solicitation (NS) message. The dest address of NS message should be
+ * solicited-node multicast address of the target. The dest mac of NS message
+ * is converted from the solicited-node multicast address.
+ *
+ * This function is called when
+ *   * An IPv6 NS target is added or removed.
+ */
 static void slave_set_ns_maddr(struct bonding *bond, struct slave *slave,
 			       struct in6_addr *target, struct in6_addr *slot)
 {
-	char target_maddr[MAX_ADDR_LEN], slot_maddr[MAX_ADDR_LEN];
+	char mac_addr[MAX_ADDR_LEN];
+	struct in6_addr mcast_addr;
 
 	if (!bond->params.arp_validate || !slave_can_set_ns_maddr(bond, slave))
 		return;
 
-	/* remove the previous maddr from slave */
+	/* remove the previous mac addr from slave */
+	addrconf_addr_solict_mult(slot, &mcast_addr);
 	if (!ipv6_addr_any(slot) &&
-	    !ndisc_mc_map(slot, slot_maddr, slave->dev, 0))
-		dev_mc_del(slave->dev, slot_maddr);
+	    !ndisc_mc_map(&mcast_addr, mac_addr, slave->dev, 0))
+		dev_mc_del(slave->dev, mac_addr);
 
-	/* add new maddr on slave if target is set */
+	/* add new mac addr on slave if target is set */
+	addrconf_addr_solict_mult(target, &mcast_addr);
 	if (!ipv6_addr_any(target) &&
-	    !ndisc_mc_map(target, target_maddr, slave->dev, 0))
-		dev_mc_add(slave->dev, target_maddr);
+	    !ndisc_mc_map(&mcast_addr, mac_addr, slave->dev, 0))
+		dev_mc_add(slave->dev, mac_addr);
 }
 
 static void _bond_options_ns_ip6_target_set(struct bonding *bond, int slot,
-- 
2.39.5

[PATCH 6.6 027/166] netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kohei Enju <enjuk@amazon.com>

[ Upstream commit d653bfeb07ebb3499c403404c21ac58a16531607 ]

Since commit b36e4523d4d5 ("netfilter: nf_conncount: fix garbage
collection confirm race"), `cpu` and `jiffies32` were introduced to
the struct nf_conncount_tuple.

The commit made nf_conncount_add() initialize `conn->cpu` and
`conn->jiffies32` when allocating the struct.
In contrast, count_tree() was not changed to initialize them.

By commit 34848d5c896e ("netfilter: nf_conncount: Split insert and
traversal"), count_tree() was split and the relevant allocation
code now resides in insert_tree().
Initialize `conn->cpu` and `conn->jiffies32` in insert_tree().

BUG: KMSAN: uninit-value in find_or_evict net/netfilter/nf_conncount.c:117 [inline]
BUG: KMSAN: uninit-value in __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143
 find_or_evict net/netfilter/nf_conncount.c:117 [inline]
 __nf_conncount_add+0xd9c/0x2850 net/netfilter/nf_conncount.c:143
 count_tree net/netfilter/nf_conncount.c:438 [inline]
 nf_conncount_count+0x82f/0x1e80 net/netfilter/nf_conncount.c:521
 connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72
 __nft_match_eval net/netfilter/nft_compat.c:403 [inline]
 nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433
 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
 nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288
 nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23
 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
 nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
 nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663
 NF_HOOK_LIST include/linux/netfilter.h:350 [inline]
 ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633
 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669
 __netif_receive_skb_list_ptype net/core/dev.c:5936 [inline]
 __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983
 __netif_receive_skb_list net/core/dev.c:6035 [inline]
 netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126
 netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178
 xdp_recv_frames net/bpf/test_run.c:280 [inline]
 xdp_test_run_batch net/bpf/test_run.c:361 [inline]
 bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390
 bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316
 bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407
 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813
 __do_sys_bpf kernel/bpf/syscall.c:5902 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5900 [inline]
 __ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900
 ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358
 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
 __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387
 do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412
 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450
 entry_SYSENTER_compat_after_hwframe+0x84/0x8e

Uninit was created at:
 slab_post_alloc_hook mm/slub.c:4121 [inline]
 slab_alloc_node mm/slub.c:4164 [inline]
 kmem_cache_alloc_noprof+0x915/0xe10 mm/slub.c:4171
 insert_tree net/netfilter/nf_conncount.c:372 [inline]
 count_tree net/netfilter/nf_conncount.c:450 [inline]
 nf_conncount_count+0x1415/0x1e80 net/netfilter/nf_conncount.c:521
 connlimit_mt+0x7f6/0xbd0 net/netfilter/xt_connlimit.c:72
 __nft_match_eval net/netfilter/nft_compat.c:403 [inline]
 nft_match_eval+0x1a5/0x300 net/netfilter/nft_compat.c:433
 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
 nft_do_chain+0x426/0x2290 net/netfilter/nf_tables_core.c:288
 nft_do_chain_ipv4+0x1a5/0x230 net/netfilter/nft_chain_filter.c:23
 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
 nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
 nf_hook_slow_list+0x24d/0x860 net/netfilter/core.c:663
 NF_HOOK_LIST include/linux/netfilter.h:350 [inline]
 ip_sublist_rcv+0x17b7/0x17f0 net/ipv4/ip_input.c:633
 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:669
 __netif_receive_skb_list_ptype net/core/dev.c:5936 [inline]
 __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5983
 __netif_receive_skb_list net/core/dev.c:6035 [inline]
 netif_receive_skb_list_internal+0x1085/0x1700 net/core/dev.c:6126
 netif_receive_skb_list+0x5a/0x460 net/core/dev.c:6178
 xdp_recv_frames net/bpf/test_run.c:280 [inline]
 xdp_test_run_batch net/bpf/test_run.c:361 [inline]
 bpf_test_run_xdp_live+0x2e86/0x3480 net/bpf/test_run.c:390
 bpf_prog_test_run_xdp+0xf1d/0x1ae0 net/bpf/test_run.c:1316
 bpf_prog_test_run+0x5e5/0xa30 kernel/bpf/syscall.c:4407
 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5813
 __do_sys_bpf kernel/bpf/syscall.c:5902 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5900 [inline]
 __ia32_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5900
 ia32_sys_call+0x394d/0x4180 arch/x86/include/generated/asm/syscalls_32.h:358
 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
 __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/common.c:387
 do_fast_syscall_32+0x38/0x80 arch/x86/entry/common.c:412
 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:450
 entry_SYSENTER_compat_after_hwframe+0x84/0x8e

Reported-by: syzbot+83fed965338b573115f7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=83fed965338b573115f7
Fixes: b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conncount.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index 71869ad466467..6156c0751056c 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -377,6 +377,8 @@ insert_tree(struct net *net,
 
 	conn->tuple = *tuple;
 	conn->zone = *zone;
+	conn->cpu = raw_smp_processor_id();
+	conn->jiffies32 = (u32)jiffies;
 	memcpy(rbconn->key, key, sizeof(u32) * data->keylen);
 
 	nf_conncount_list_init(&rbconn->list);
-- 
2.39.5

[PATCH 6.6 028/166] ipvs: prevent integer overflow in do_ip_vs_get_ctl()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit 80b78c39eb86e6b55f56363b709eb817527da5aa ]

The get->num_services variable is an unsigned int which is controlled by
the user.  The struct_size() function ensures that the size calculation
does not overflow an unsigned long, however, we are saving the result to
an int so the calculation can overflow.

Both "len" and "get->num_services" come from the user.  This check is
just a sanity check to help the user and ensure they are using the API
correctly.  An integer overflow here is not a big deal.  This has no
security impact.

Save the result from struct_size() type size_t to fix this integer
overflow bug.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index dec5309d9f1f5..ae76542de3e98 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -3091,12 +3091,12 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 	case IP_VS_SO_GET_SERVICES:
 	{
 		struct ip_vs_get_services *get;
-		int size;
+		size_t size;
 
 		get = (struct ip_vs_get_services *)arg;
 		size = struct_size(get, entrytable, get->num_services);
 		if (*len != size) {
-			pr_err("length: %u != %u\n", *len, size);
+			pr_err("length: %u != %zu\n", *len, size);
 			ret = -EINVAL;
 			goto out;
 		}
@@ -3132,12 +3132,12 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 	case IP_VS_SO_GET_DESTS:
 	{
 		struct ip_vs_get_dests *get;
-		int size;
+		size_t size;
 
 		get = (struct ip_vs_get_dests *)arg;
 		size = struct_size(get, entrytable, get->num_dests);
 		if (*len != size) {
-			pr_err("length: %u != %u\n", *len, size);
+			pr_err("length: %u != %zu\n", *len, size);
 			ret = -EINVAL;
 			goto out;
 		}
-- 
2.39.5

[PATCH 6.6 029/166] net_sched: Prevent creation of classes with TC_H_ROOT

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 0c3057a5a04d07120b3d0ec9c79568fceb9c921e ]

The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.

Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal.

Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 066a3b5b2346 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_api.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 7cddaa6321c7c..df89790c459ad 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -2197,6 +2197,12 @@ static int tc_ctl_tclass(struct sk_buff *skb, struct nlmsghdr *n,
 		return -EOPNOTSUPP;
 	}
 
+	/* Prevent creation of traffic classes with classid TC_H_ROOT */
+	if (clid == TC_H_ROOT) {
+		NL_SET_ERR_MSG(extack, "Cannot create traffic class with classid TC_H_ROOT");
+		return -EINVAL;
+	}
+
 	new_cl = cl;
 	err = -EOPNOTSUPP;
 	if (cops->change)
-- 
2.39.5

[PATCH 6.6 030/166] netfilter: nft_exthdr: fix offset with ipv4_find_option()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kashavkin <akashavkin@gmail.com>

[ Upstream commit 6edd78af9506bb182518da7f6feebd75655d9a0e ]

There is an incorrect calculation in the offset variable which causes
the nft_skb_copy_to_reg() function to always return -EFAULT. Adding the
start variable is redundant. In the __ip_options_compile() function the
correct offset is specified when finding the function. There is no need
to add the size of the iphdr structure to the offset.

Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: Alexey Kashavkin <akashavkin@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_exthdr.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index 6eb571d0c3fdf..cfa90ab660cfe 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -85,7 +85,6 @@ static int ipv4_find_option(struct net *net, struct sk_buff *skb,
 	unsigned char optbuf[sizeof(struct ip_options) + 40];
 	struct ip_options *opt = (struct ip_options *)optbuf;
 	struct iphdr *iph, _iph;
-	unsigned int start;
 	bool found = false;
 	__be32 info;
 	int optlen;
@@ -93,7 +92,6 @@ static int ipv4_find_option(struct net *net, struct sk_buff *skb,
 	iph = skb_header_pointer(skb, 0, sizeof(_iph), &_iph);
 	if (!iph)
 		return -EBADMSG;
-	start = sizeof(struct iphdr);
 
 	optlen = iph->ihl * 4 - (int)sizeof(struct iphdr);
 	if (optlen <= 0)
@@ -103,7 +101,7 @@ static int ipv4_find_option(struct net *net, struct sk_buff *skb,
 	/* Copy the options since __ip_options_compile() modifies
 	 * the options.
 	 */
-	if (skb_copy_bits(skb, start, opt->__data, optlen))
+	if (skb_copy_bits(skb, sizeof(struct iphdr), opt->__data, optlen))
 		return -EBADMSG;
 	opt->optlen = optlen;
 
@@ -118,18 +116,18 @@ static int ipv4_find_option(struct net *net, struct sk_buff *skb,
 		found = target == IPOPT_SSRR ? opt->is_strictroute :
 					       !opt->is_strictroute;
 		if (found)
-			*offset = opt->srr + start;
+			*offset = opt->srr;
 		break;
 	case IPOPT_RR:
 		if (!opt->rr)
 			break;
-		*offset = opt->rr + start;
+		*offset = opt->rr;
 		found = true;
 		break;
 	case IPOPT_RA:
 		if (!opt->router_alert)
 			break;
-		*offset = opt->router_alert + start;
+		*offset = opt->router_alert;
 		found = true;
 		break;
 	default:
-- 
2.39.5

[PATCH 6.6 031/166] gre: Fix IPv6 link-local address generation.

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit 183185a18ff96751db52a46ccf93fff3a1f42815 ]

Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().

GRE used to use addrconf_addr_gen() until commit e5dd729460ca
("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL
address") restricted this use to gretap and ip6gretap devices, and
created add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.

The original problem came when commit 9af28511be10 ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.

Then commit e5dd729460ca ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).

That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.

Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:

  * run over IPv4,
  * transport IP packets directly, not Ethernet (that is, not gretap
    interfaces),
  * tunnel endpoint is INADDR_ANY (that is, 0),
  * device address generation mode is EUI64.

In all other cases, revert back to the regular addrconf_addr_gen().

Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.

Fixes: e5dd729460ca ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/559c32ce5c9976b269e6337ac9abb6a96abe5096.1741375285.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/addrconf.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 8360939acf85a..db07d3bbaf379 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3189,16 +3189,13 @@ static void add_v4_addrs(struct inet6_dev *idev)
 	struct in6_addr addr;
 	struct net_device *dev;
 	struct net *net = dev_net(idev->dev);
-	int scope, plen, offset = 0;
+	int scope, plen;
 	u32 pflags = 0;
 
 	ASSERT_RTNL();
 
 	memset(&addr, 0, sizeof(struct in6_addr));
-	/* in case of IP6GRE the dev_addr is an IPv6 and therefore we use only the last 4 bytes */
-	if (idev->dev->addr_len == sizeof(struct in6_addr))
-		offset = sizeof(struct in6_addr) - 4;
-	memcpy(&addr.s6_addr32[3], idev->dev->dev_addr + offset, 4);
+	memcpy(&addr.s6_addr32[3], idev->dev->dev_addr, 4);
 
 	if (!(idev->dev->flags & IFF_POINTOPOINT) && idev->dev->type == ARPHRD_SIT) {
 		scope = IPV6_ADDR_COMPATv4;
@@ -3508,7 +3505,13 @@ static void addrconf_gre_config(struct net_device *dev)
 		return;
 	}
 
-	if (dev->type == ARPHRD_ETHER) {
+	/* Generate the IPv6 link-local address using addrconf_addr_gen(),
+	 * unless we have an IPv4 GRE device not bound to an IP address and
+	 * which is in EUI64 mode (as __ipv6_isatap_ifid() would fail in this
+	 * case). Such devices fall back to add_v4_addrs() instead.
+	 */
+	if (!(dev->type == ARPHRD_IPGRE && *(__be32 *)dev->dev_addr == 0 &&
+	      idev->cnf.addr_gen_mode == IN6_ADDR_GEN_MODE_EUI64)) {
 		addrconf_addr_gen(idev, true);
 		return;
 	}
-- 
2.39.5

[PATCH 6.6 032/166] net: openvswitch: remove misbehaving actions length check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Maximets <i.maximets@ovn.org>

[ Upstream commit a1e64addf3ff9257b45b78bc7d743781c3f41340 ]

The actions length check is unreliable and produces different results
depending on the initial length of the provided netlink attribute and
the composition of the actual actions inside of it.  For example, a
user can add 4088 empty clone() actions without triggering -EMSGSIZE,
on attempt to add 4089 such actions the operation will fail with the
-EMSGSIZE verdict.  However, if another 16 KB of other actions will
be *appended* to the previous 4089 clone() actions, the check passes
and the flow is successfully installed into the openvswitch datapath.

The reason for a such a weird behavior is the way memory is allocated.
When ovs_flow_cmd_new() is invoked, it calls ovs_nla_copy_actions(),
that in turn calls nla_alloc_flow_actions() with either the actual
length of the user-provided actions or the MAX_ACTIONS_BUFSIZE.  The
function adds the size of the sw_flow_actions structure and then the
actually allocated memory is rounded up to the closest power of two.

So, if the user-provided actions are larger than MAX_ACTIONS_BUFSIZE,
then MAX_ACTIONS_BUFSIZE + sizeof(*sfa) rounded up is 32K + 24 -> 64K.
Later, while copying individual actions, we look at ksize(), which is
64K, so this way the MAX_ACTIONS_BUFSIZE check is not actually
triggered and the user can easily allocate almost 64 KB of actions.

However, when the initial size is less than MAX_ACTIONS_BUFSIZE, but
the actions contain ones that require size increase while copying
(such as clone() or sample()), then the limit check will be performed
during the reserve_sfa_size() and the user will not be allowed to
create actions that yield more than 32 KB internally.

This is one part of the problem.  The other part is that it's not
actually possible for the userspace application to know beforehand
if the particular set of actions will be rejected or not.

Certain actions require more space in the internal representation,
e.g. an empty clone() takes 4 bytes in the action list passed in by
the user, but it takes 12 bytes in the internal representation due
to an extra nested attribute, and some actions require less space in
the internal representations, e.g. set(tunnel(..)) normally takes
64+ bytes in the action list provided by the user, but only needs to
store a single pointer in the internal implementation, since all the
data is stored in the tunnel_info structure instead.

And the action size limit is applied to the internal representation,
not to the action list passed by the user.  So, it's not possible for
the userpsace application to predict if the certain combination of
actions will be rejected or not, because it is not possible for it to
calculate how much space these actions will take in the internal
representation without knowing kernel internals.

All that is causing random failures in ovs-vswitchd in userspace and
inability to handle certain traffic patterns as a result.  For example,
it is reported that adding a bit more than a 1100 VMs in an OpenStack
setup breaks the network due to OVS not being able to handle ARP
traffic anymore in some cases (it tries to install a proper datapath
flow, but the kernel rejects it with -EMSGSIZE, even though the action
list isn't actually that large.)

Kernel behavior must be consistent and predictable in order for the
userspace application to use it in a reasonable way.  ovs-vswitchd has
a mechanism to re-direct parts of the traffic and partially handle it
in userspace if the required action list is oversized, but that doesn't
work properly if we can't actually tell if the action list is oversized
or not.

Solution for this is to check the size of the user-provided actions
instead of the internal representation.  This commit just removes the
check from the internal part because there is already an implicit size
check imposed by the netlink protocol.  The attribute can't be larger
than 64 KB.  Realistically, we could reduce the limit to 32 KB, but
we'll be risking to break some existing setups that rely on the fact
that it's possible to create nearly 64 KB action lists today.

Vast majority of flows in real setups are below 100-ish bytes.  So
removal of the limit will not change real memory consumption on the
system.  The absolutely worst case scenario is if someone adds a flow
with 64 KB of empty clone() actions.  That will yield a 192 KB in the
internal representation consuming 256 KB block of memory.  However,
that list of actions is not meaningful and also a no-op.  Real world
very large action lists (that can occur for a rare cases of BUM
traffic handling) are unlikely to contain a large number of clones and
will likely have a lot of tunnel attributes making the internal
representation comparable in size to the original action list.
So, it should be fine to just remove the limit.

Commit in the 'Fixes' tag is the first one that introduced the
difference between internal representation and the user-provided action
lists, but there were many more afterwards that lead to the situation
we have today.

Fixes: 7d5437c709de ("openvswitch: Add tunneling interface.")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250308004609.2881861-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/openvswitch/flow_netlink.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/net/openvswitch/flow_netlink.c b/net/openvswitch/flow_netlink.c
index ebc5728aab4ea..9c13e14034d3b 100644
--- a/net/openvswitch/flow_netlink.c
+++ b/net/openvswitch/flow_netlink.c
@@ -2304,14 +2304,10 @@ int ovs_nla_put_mask(const struct sw_flow *flow, struct sk_buff *skb)
 				OVS_FLOW_ATTR_MASK, true, skb);
 }
 
-#define MAX_ACTIONS_BUFSIZE	(32 * 1024)
-
 static struct sw_flow_actions *nla_alloc_flow_actions(int size)
 {
 	struct sw_flow_actions *sfa;
 
-	WARN_ON_ONCE(size > MAX_ACTIONS_BUFSIZE);
-
 	sfa = kmalloc(kmalloc_size_roundup(sizeof(*sfa) + size), GFP_KERNEL);
 	if (!sfa)
 		return ERR_PTR(-ENOMEM);
@@ -2467,15 +2463,6 @@ static struct nlattr *reserve_sfa_size(struct sw_flow_actions **sfa,
 
 	new_acts_size = max(next_offset + req_size, ksize(*sfa) * 2);
 
-	if (new_acts_size > MAX_ACTIONS_BUFSIZE) {
-		if ((next_offset + req_size) > MAX_ACTIONS_BUFSIZE) {
-			OVS_NLERR(log, "Flow action size exceeds max %u",
-				  MAX_ACTIONS_BUFSIZE);
-			return ERR_PTR(-EMSGSIZE);
-		}
-		new_acts_size = MAX_ACTIONS_BUFSIZE;
-	}
-
 	acts = nla_alloc_flow_actions(new_acts_size);
 	if (IS_ERR(acts))
 		return (void *)acts;
@@ -3502,7 +3489,7 @@ int ovs_nla_copy_actions(struct net *net, const struct nlattr *attr,
 	int err;
 	u32 mpls_label_count = 0;
 
-	*sfa = nla_alloc_flow_actions(min(nla_len(attr), MAX_ACTIONS_BUFSIZE));
+	*sfa = nla_alloc_flow_actions(nla_len(attr));
 	if (IS_ERR(*sfa))
 		return PTR_ERR(*sfa);
 
-- 
2.39.5

[PATCH 6.6 033/166] net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit 32966984bee1defd9f5a8f9be274d7c32f911ba1 ]

Currently, MultiPort E-Switch is requesting to create a LAG with shared
FDB without checking the LAG is supporting shared FDB.
Add the check.

Fixes: a32327a3a02c ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c   | 4 ++--
 drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h   | 1 +
 drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c | 3 ++-
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index 18cf756bad8cc..f6b1ac80c0af9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -823,7 +823,7 @@ void mlx5_disable_lag(struct mlx5_lag *ldev)
 				mlx5_eswitch_reload_ib_reps(ldev->pf[i].dev->priv.eswitch);
 }
 
-static bool mlx5_shared_fdb_supported(struct mlx5_lag *ldev)
+bool mlx5_lag_shared_fdb_supported(struct mlx5_lag *ldev)
 {
 	struct mlx5_core_dev *dev;
 	int i;
@@ -900,7 +900,7 @@ static void mlx5_do_bond(struct mlx5_lag *ldev)
 	}
 
 	if (do_bond && !__mlx5_lag_is_active(ldev)) {
-		bool shared_fdb = mlx5_shared_fdb_supported(ldev);
+		bool shared_fdb = mlx5_lag_shared_fdb_supported(ldev);
 
 		roce_lag = mlx5_lag_is_roce_lag(ldev);
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
index 481e92f39fe61..b7ccf0e955f56 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.h
@@ -92,6 +92,7 @@ mlx5_lag_is_ready(struct mlx5_lag *ldev)
 	return test_bit(MLX5_LAG_FLAG_NDEVS_READY, &ldev->state_flags);
 }
 
+bool mlx5_lag_shared_fdb_supported(struct mlx5_lag *ldev);
 bool mlx5_lag_check_prereq(struct mlx5_lag *ldev);
 void mlx5_modify_lag(struct mlx5_lag *ldev,
 		     struct lag_tracker *tracker);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
index 6b0413a3987ce..8a07fdf295056 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/mpesw.c
@@ -81,7 +81,8 @@ static int enable_mpesw(struct mlx5_lag *ldev)
 	if (mlx5_eswitch_mode(dev0) != MLX5_ESWITCH_OFFLOADS ||
 	    !MLX5_CAP_PORT_SELECTION(dev0, port_select_flow_table) ||
 	    !MLX5_CAP_GEN(dev0, create_lag_when_not_master_up) ||
-	    !mlx5_lag_check_prereq(ldev))
+	    !mlx5_lag_check_prereq(ldev) ||
+	    !mlx5_lag_shared_fdb_supported(ldev))
 		return -EOPNOTSUPP;
 
 	err = mlx5_mpesw_metadata_set(ldev);
-- 
2.39.5

[PATCH 6.6 034/166] net/mlx5: Bridge, fix the crash caused by LAG state check

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jianbo Liu <jianbol@nvidia.com>

[ Upstream commit 4b8eeed4fb105770ce6dc84a2c6ef953c7b71cbb ]

When removing LAG device from bridge, NETDEV_CHANGEUPPER event is
triggered. Driver finds the lower devices (PFs) to flush all the
offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns
false if one of PF is unloaded. In such case,
mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of
the alive PF, and the flush is skipped.

Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge
event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be
ignored in this case because the upper interface for bond is deleted,
and the entry will never be aged because lastuse is never updated.

To make things worse, as the entry is alive, mlx5 bridge workqueue
keeps sending that event, which is then handled by kernel bridge
notifier. It causes the following crash when accessing the passed bond
netdev which is already destroyed.

To fix this issue, remove such checks. LAG state is already checked in
commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding
bond to bridge"), driver still need to skip offload if LAG becomes
invalid state after initialization.

 Oops: stack segment: 0000 [#1] SMP
 CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G           OE      6.11.0_mlnx #1
 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core]
 RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge]
 Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7
 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297
 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff
 RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0
 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8
 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60
 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? __die_body+0x1a/0x60
  ? die+0x38/0x60
  ? do_trap+0x10b/0x120
  ? do_error_trap+0x64/0xa0
  ? exc_stack_segment+0x33/0x50
  ? asm_exc_stack_segment+0x22/0x30
  ? br_switchdev_event+0x2c/0x110 [bridge]
  ? sched_balance_newidle.isra.149+0x248/0x390
  notifier_call_chain+0x4b/0xa0
  atomic_notifier_call_chain+0x16/0x20
  mlx5_esw_bridge_update+0xec/0x170 [mlx5_core]
  mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core]
  process_scheduled_works+0x81/0x390
  worker_thread+0x106/0x250
  ? bh_worker+0x110/0x110
  kthread+0xb7/0xe0
  ? kthread_park+0x80/0x80
  ret_from_fork+0x2d/0x50
  ? kthread_park+0x80/0x80
  ret_from_fork_asm+0x11/0x20
  </TASK>

Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/en/rep/bridge.c  | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
index 5d128c5b4529a..0f5d7ea8956f7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rep/bridge.c
@@ -48,15 +48,10 @@ mlx5_esw_bridge_lag_rep_get(struct net_device *dev, struct mlx5_eswitch *esw)
 	struct list_head *iter;
 
 	netdev_for_each_lower_dev(dev, lower, iter) {
-		struct mlx5_core_dev *mdev;
-		struct mlx5e_priv *priv;
-
 		if (!mlx5e_eswitch_rep(lower))
 			continue;
 
-		priv = netdev_priv(lower);
-		mdev = priv->mdev;
-		if (mlx5_lag_is_shared_fdb(mdev) && mlx5_esw_bridge_dev_same_esw(lower, esw))
+		if (mlx5_esw_bridge_dev_same_esw(lower, esw))
 			return lower;
 	}
 
@@ -125,7 +120,7 @@ static bool mlx5_esw_bridge_is_local(struct net_device *dev, struct net_device *
 	priv = netdev_priv(rep);
 	mdev = priv->mdev;
 	if (netif_is_lag_master(dev))
-		return mlx5_lag_is_shared_fdb(mdev) && mlx5_lag_is_master(mdev);
+		return mlx5_lag_is_master(mdev);
 	return true;
 }
 
@@ -455,6 +450,9 @@ static int mlx5_esw_bridge_switchdev_event(struct notifier_block *nb,
 	if (!rep)
 		return NOTIFY_DONE;
 
+	if (netif_is_lag_master(dev) && !mlx5_lag_is_shared_fdb(esw->dev))
+		return NOTIFY_DONE;
+
 	switch (event) {
 	case SWITCHDEV_FDB_ADD_TO_BRIDGE:
 		fdb_info = container_of(info,
-- 
2.39.5

[PATCH 6.6 035/166] net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carolina Jubran <cjubran@nvidia.com>

[ Upstream commit e92df790d07a8eea873efcb84776e7b71f81c7d5 ]

mlx5_eswitch_get_vepa returns -EPERM if the device lacks
eswitch_manager capability, blocking mlx5e_bridge_getlink from
retrieving VEPA mode. Since mlx5e_bridge_getlink implements
ndo_bridge_getlink, returning -EPERM causes bridge link show to fail
instead of skipping devices without this capability.

To avoid this, return -EOPNOTSUPP from mlx5e_bridge_getlink when
mlx5_eswitch_get_vepa fails, ensuring the command continues processing
other devices while ignoring those without the necessary capability.

Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741644104-97767-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index b34f57ab9755c..8a892614015cd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4891,11 +4891,9 @@ static int mlx5e_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 	struct mlx5e_priv *priv = netdev_priv(dev);
 	struct mlx5_core_dev *mdev = priv->mdev;
 	u8 mode, setting;
-	int err;
 
-	err = mlx5_eswitch_get_vepa(mdev->priv.eswitch, &setting);
-	if (err)
-		return err;
+	if (mlx5_eswitch_get_vepa(mdev->priv.eswitch, &setting))
+		return -EOPNOTSUPP;
 	mode = setting ? BRIDGE_MODE_VEPA : BRIDGE_MODE_VEB;
 	return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
 				       mode,
-- 
2.39.5

[PATCH 6.6 036/166] nvme-fc: go straight to connecting state when initializing

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Wagner <wagi@kernel.org>

[ Upstream commit d3d380eded7ee5fc2fc53b3b0e72365ded025c4a ]

The initial controller initialization mimiks the reconnect loop
behavior by switching from NEW to RESETTING and then to CONNECTING.

The transition from NEW to CONNECTING is a valid transition, so there is
no point entering the RESETTING state. TCP and RDMA also transition
directly to CONNECTING state.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 91324791a5b66..0641050f590f3 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -3553,8 +3553,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts,
 	list_add_tail(&ctrl->ctrl_list, &rport->ctrl_list);
 	spin_unlock_irqrestore(&rport->lock, flags);
 
-	if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESETTING) ||
-	    !nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) {
+	if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) {
 		dev_err(ctrl->ctrl.device,
 			"NVME-FC{%d}: failed to init ctrl state\n", ctrl->cnum);
 		goto fail_ctrl;
-- 
2.39.5

[PATCH 6.6 037/166] nvme-fc: do not ignore connectivity loss during connecting

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Wagner <wagi@kernel.org>

[ Upstream commit ee59e3820ca92a9f4307ae23dfc7229dc8b8d400 ]

When a connectivity loss occurs while nvme_fc_create_assocation is
being executed, it's possible that the ctrl ends up stuck in the LIVE
state:

  1) nvme nvme10: NVME-FC{10}: create association : ...
  2) nvme nvme10: NVME-FC{10}: controller connectivity lost.
                  Awaiting Reconnect
     nvme nvme10: queue_size 128 > ctrl maxcmd 32, reducing to maxcmd
  3) nvme nvme10: Could not set queue count (880)
     nvme nvme10: Failed to configure AEN (cfg 900)
  4) nvme nvme10: NVME-FC{10}: controller connect complete
  5) nvme nvme10: failed nvme_keep_alive_end_io error=4

A connection attempt starts 1) and the ctrl is in state CONNECTING.
Shortly after the LLDD driver detects a connection lost event and calls
nvme_fc_ctrl_connectivity_loss 2). Because we are still in CONNECTING
state, this event is ignored.

nvme_fc_create_association continues to run in parallel and tries to
communicate with the controller and these commands will fail. Though
these errors are filtered out, e.g in 3) setting the I/O queues numbers
fails which leads to an early exit in nvme_fc_create_io_queues. Because
the number of IO queues is 0 at this point, there is nothing left in
nvme_fc_create_association which could detected the connection drop.
Thus the ctrl enters LIVE state 4).

Eventually the keep alive handler times out 5) but because nothing is
being done, the ctrl stays in LIVE state.

There is already the ASSOC_FAILED flag to track connectivity loss event
but this bit is set too late in the recovery code path. Move this into
the connectivity loss event handler and synchronize it with the state
change. This ensures that the ASSOC_FAILED flag is seen by
nvme_fc_create_io_queues and it does not enter the LIVE state after a
connectivity loss event. If the connectivity loss event happens after we
entered the LIVE state the normal error recovery path is executed.

Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fc.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 0641050f590f3..66c4c411ebe04 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -782,11 +782,19 @@ nvme_fc_abort_lsops(struct nvme_fc_rport *rport)
 static void
 nvme_fc_ctrl_connectivity_loss(struct nvme_fc_ctrl *ctrl)
 {
+	enum nvme_ctrl_state state;
+	unsigned long flags;
+
 	dev_info(ctrl->ctrl.device,
 		"NVME-FC{%d}: controller connectivity lost. Awaiting "
 		"Reconnect", ctrl->cnum);
 
-	switch (nvme_ctrl_state(&ctrl->ctrl)) {
+	spin_lock_irqsave(&ctrl->lock, flags);
+	set_bit(ASSOC_FAILED, &ctrl->flags);
+	state = nvme_ctrl_state(&ctrl->ctrl);
+	spin_unlock_irqrestore(&ctrl->lock, flags);
+
+	switch (state) {
 	case NVME_CTRL_NEW:
 	case NVME_CTRL_LIVE:
 		/*
@@ -2546,7 +2554,6 @@ nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg)
 	 */
 	if (state == NVME_CTRL_CONNECTING) {
 		__nvme_fc_abort_outstanding_ios(ctrl, true);
-		set_bit(ASSOC_FAILED, &ctrl->flags);
 		dev_warn(ctrl->ctrl.device,
 			"NVME-FC{%d}: transport error during (re)connect\n",
 			ctrl->cnum);
@@ -3168,12 +3175,18 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl)
 		else
 			ret = nvme_fc_recreate_io_queues(ctrl);
 	}
-	if (!ret && test_bit(ASSOC_FAILED, &ctrl->flags))
-		ret = -EIO;
 	if (ret)
 		goto out_term_aen_ops;
 
-	changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE);
+	spin_lock_irqsave(&ctrl->lock, flags);
+	if (!test_bit(ASSOC_FAILED, &ctrl->flags))
+		changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE);
+	else
+		ret = -EIO;
+	spin_unlock_irqrestore(&ctrl->lock, flags);
+
+	if (ret)
+		goto out_term_aen_ops;
 
 	ctrl->ctrl.nr_reconnects = 0;
 
-- 
2.39.5

[PATCH 6.6 038/166] hrtimers: Mark is_migration_base() with __always_inline

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 27af31e44949fa85550176520ef7086a0d00fd7b ]

When is_migration_base() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:

kernel/time/hrtimer.c:156:20: error: unused function 'is_migration_base' [-Werror,-Wunused-function]
  156 | static inline bool is_migration_base(struct hrtimer_clock_base *base)
      |                    ^~~~~~~~~~~~~~~~~

Fix this by marking it with __always_inline.

[ tglx: Use __always_inline instead of __maybe_unused and move it into the
  	usage sites conditional ]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250116160745.243358-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/hrtimer.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index 5db6912b8f6e1..877535b06e73a 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -145,11 +145,6 @@ static struct hrtimer_cpu_base migration_cpu_base = {
 
 #define migration_base	migration_cpu_base.clock_base[0]
 
-static inline bool is_migration_base(struct hrtimer_clock_base *base)
-{
-	return base == &migration_base;
-}
-
 /*
  * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
  * means that all timers which are tied to this base via timer->base are
@@ -275,11 +270,6 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
 
 #else /* CONFIG_SMP */
 
-static inline bool is_migration_base(struct hrtimer_clock_base *base)
-{
-	return false;
-}
-
 static inline struct hrtimer_clock_base *
 lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
 	__acquires(&timer->base->cpu_base->lock)
@@ -1381,6 +1371,18 @@ static void hrtimer_sync_wait_running(struct hrtimer_cpu_base *cpu_base,
 	}
 }
 
+#ifdef CONFIG_SMP
+static __always_inline bool is_migration_base(struct hrtimer_clock_base *base)
+{
+	return base == &migration_base;
+}
+#else
+static __always_inline bool is_migration_base(struct hrtimer_clock_base *base)
+{
+	return false;
+}
+#endif
+
 /*
  * This function is called on PREEMPT_RT kernels when the fast path
  * deletion of a timer failed because the timer callback function was
-- 
2.39.5

[PATCH 6.6 039/166] powercap: call put_device() on an error path in powercap_register_control_type()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>

[ Upstream commit 93c66fbc280747ea700bd6199633d661e3c819b3 ]

powercap_register_control_type() calls device_register(), but does not
release the refcount of the device when it fails.

Call put_device() before returning an error to balance the refcount.

Since the kfree(control_type) will be done by powercap_release(), remove
the lines in powercap_register_control_type() before returning the error.

This bug was found by an experimental verifier that I am developing.

Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20250110010554.1583411-1-joe@pf.is.s.u-tokyo.ac.jp
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/powercap/powercap_sys.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
index 52c32dcbf7d84..4112a00973382 100644
--- a/drivers/powercap/powercap_sys.c
+++ b/drivers/powercap/powercap_sys.c
@@ -627,8 +627,7 @@ struct powercap_control_type *powercap_register_control_type(
 	dev_set_name(&control_type->dev, "%s", name);
 	result = device_register(&control_type->dev);
 	if (result) {
-		if (control_type->allocated)
-			kfree(control_type);
+		put_device(&control_type->dev);
 		return ERR_PTR(result);
 	}
 	idr_init(&control_type->idr);
-- 
2.39.5

[PATCH 6.6 040/166] iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chengen Du <chengen.du@canonical.com>

[ Upstream commit 07e0d99a2f701123ad3104c0f1a1e66bce74d6e5 ]

When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message.

Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/iscsi_ibft.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 6e9788324fea5..371f24569b3b2 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -310,7 +310,10 @@ static ssize_t ibft_attr_show_nic(void *data, int type, char *buf)
 		str += sprintf_ipaddr(str, nic->ip_addr);
 		break;
 	case ISCSI_BOOT_ETH_SUBNET_MASK:
-		val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
+		if (nic->subnet_mask_prefix > 32)
+			val = cpu_to_be32(~0);
+		else
+			val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
 		str += sprintf(str, "%pI4", &val);
 		break;
 	case ISCSI_BOOT_ETH_PREFIX_LEN:
-- 
2.39.5

[PATCH 6.6 041/166] sched/debug: Provide slice length for fair tasks

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Loehle <christian.loehle@arm.com>

[ Upstream commit 9065ce69754dece78606c8bbb3821449272e56bf ]

Since commit:

  857b158dc5e8 ("sched/eevdf: Use sched_attr::sched_runtime to set request/slice suggestion")

... we have the userspace per-task tunable slice length, which is
a key parameter that is otherwise difficult to obtain, so provide
it in /proc/$PID/sched.

[ mingo: Clarified the changelog. ]

Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/453349b1-1637-42f5-a7b2-2385392b5956@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/debug.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c
index 4c3d0d9f3db63..115e266db76bf 100644
--- a/kernel/sched/debug.c
+++ b/kernel/sched/debug.c
@@ -1089,6 +1089,8 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns,
 	if (task_has_dl_policy(p)) {
 		P(dl.runtime);
 		P(dl.deadline);
+	} else if (fair_policy(p->policy)) {
+		P(se.slice);
 	}
 #undef PN_SCHEDSTAT
 #undef P_SCHEDSTAT
-- 
2.39.5

[PATCH 6.6 042/166] platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Kandybka <d.kandybka@gmail.com>

[ Upstream commit 583ef25bb2a094813351a727ddec38b35a15b9f8 ]

In pmc_core_ltr_show(), promote 'val' to 'u64' to avoid possible integer
overflow. Values (10 bit) are multiplied by the scale, the result of
expression is in a range from 1 to 34,326,183,936 which is bigger then
UINT32_MAX. Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250123220739.68087-1-d.kandybka@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel/pmc/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c
index 022afb97d531c..2fb73e924bd64 100644
--- a/drivers/platform/x86/intel/pmc/core.c
+++ b/drivers/platform/x86/intel/pmc/core.c
@@ -620,8 +620,8 @@ static u32 convert_ltr_scale(u32 val)
 static int pmc_core_ltr_show(struct seq_file *s, void *unused)
 {
 	struct pmc_dev *pmcdev = s->private;
-	u64 decoded_snoop_ltr, decoded_non_snoop_ltr;
-	u32 ltr_raw_data, scale, val;
+	u64 decoded_snoop_ltr, decoded_non_snoop_ltr, val;
+	u32 ltr_raw_data, scale;
 	u16 snoop_ltr, nonsnoop_ltr;
 	int i, index, ltr_index = 0;
 
-- 
2.39.5

[PATCH 6.6 043/166] scsi: core: Use GFP_NOIO to avoid circular locking dependency

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rik van Riel <riel@surriel.com>

[ Upstream commit 5363ee9d110e139584c2d92a0b640bc210588506 ]

Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.

WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0

but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760

The full lockdep splat can be found in Marc's report:

https://lkml.org/lkml/2025/1/24/1101

Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.

Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index ca99be7341d9b..cead0fbbe5dbd 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -245,7 +245,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
 	}
 	ret = sbitmap_init_node(&sdev->budget_map,
 				scsi_device_max_queue_depth(sdev),
-				new_shift, GFP_KERNEL,
+				new_shift, GFP_NOIO,
 				sdev->request_queue->node, false, true);
 	if (!ret)
 		sbitmap_resize(&sdev->budget_map, depth);
-- 
2.39.5

[PATCH 6.6 044/166] scsi: ufs: core: Fix error return with query response

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seunghui Lee <sh043.lee@samsung.com>

[ Upstream commit 1a78a56ea65252bb089e0daace989167227f2d31 ]

There is currently no mechanism to return error from query responses.
Return the error and print the corresponding error message with it.

Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250118023808.24726-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 6d53dd7d411a8..cb5611cbf4547 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -3027,8 +3027,13 @@ ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	case UPIU_TRANSACTION_QUERY_RSP: {
 		u8 response = lrbp->ucd_rsp_ptr->header.response;
 
-		if (response == 0)
+		if (response == 0) {
 			err = ufshcd_copy_query_response(hba, lrbp);
+		} else {
+			err = -EINVAL;
+			dev_err(hba->dev, "%s: unexpected response in Query RSP: %x\n",
+					__func__, response);
+		}
 		break;
 	}
 	case UPIU_TRANSACTION_REJECT_UPIU:
-- 
2.39.5

[PATCH 6.6 045/166] scsi: qla1280: Fix kernel oops when debug level > 2

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Magnus Lindholm <linmag7@gmail.com>

[ Upstream commit 5233e3235dec3065ccc632729675575dbe3c6b8a ]

A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2.  I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.

Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20250125095033.26188-1-linmag7@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla1280.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 6e5e89aaa283b..74b23c43af3ea 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2866,7 +2866,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
 			dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
 				cpu_to_le32(upper_32_bits(dma_handle)),
 				cpu_to_le32(lower_32_bits(dma_handle)),
-				cpu_to_le32(sg_dma_len(sg_next(s))));
+				cpu_to_le32(sg_dma_len(s)));
 			remseg--;
 		}
 		dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
-- 
2.39.5

[PATCH 6.6 046/166] ACPI: resource: IRQ override for Eluktronics MECH-17

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gannon Kolding <gannon.kolding@gmail.com>

[ Upstream commit 607ab6f85f4194b644ea95ac5fe660ef575db3b4 ]

The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.

Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.

Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/resource.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 64d83ff3c0d90..96a987506e717 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -549,6 +549,12 @@ static const struct dmi_system_id maingear_laptop[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "RP-15"),
 		},
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Eluktronics Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "MECH-17"),
+		},
+	},
 	{
 		/* TongFang GM6XGxX/TUXEDO Stellaris 16 Gen5 AMD */
 		.matches = {
-- 
2.39.5

[PATCH 6.6 047/166] smb: client: fix noisy when tree connecting to DFS interlink targets

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Alcantara <pc@manguebit.com>

[ Upstream commit 773dc23ff81838b6f74d7fabba5a441cc6a93982 ]

When the client attempts to tree connect to a domain-based DFS
namespace from a DFS interlink target, the server will return
STATUS_BAD_NETWORK_NAME and the following will appear on dmesg:

	CIFS: VFS:  BAD_NETWORK_NAME: \\dom\dfs

Since a DFS share might contain several DFS interlinks and they expire
after 10 minutes, the above message might end up being flooded on
dmesg when mounting or accessing them.

Print this only once per share.

Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/smb2pdu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c
index 24b1738a35a15..1b6cb533f5b87 100644
--- a/fs/smb/client/smb2pdu.c
+++ b/fs/smb/client/smb2pdu.c
@@ -2162,7 +2162,7 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree,
 
 tcon_error_exit:
 	if (rsp && rsp->hdr.Status == STATUS_BAD_NETWORK_NAME)
-		cifs_tcon_dbg(VFS, "BAD_NETWORK_NAME: %s\n", tree);
+		cifs_dbg(VFS | ONCE, "BAD_NETWORK_NAME: %s\n", tree);
 	goto tcon_exit;
 }
 
-- 
2.39.5

[PATCH 6.6 048/166] alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

[ Upstream commit b029628be267cba3c7684ec684749fe3e4372398 ]

Richard Henderson <richard.henderson@linaro.org> writes[1]:

> There was a Spec benchmark (I forget which) which was memory bound and ran
> twice as fast with 32-bit pointers.
>
> I copied the idea from DEC to the ELF abi, but never did all the other work
> to allow the toolchain to take advantage.
>
> Amusingly, a later Spec changed the benchmark data sets to not fit into a
> 32-bit address space, specifically because of this.
>
> I expect one could delete the ELF bit and personality and no one would
> notice. Not even the 10 remaining Alpha users.

In [2] it was pointed out that parts of setarch weren't working
properly on alpha because it has it's own SET_PERSONALITY
implementation.  In the discussion that followed Richard Henderson
pointed out that the 32bit pointer support for alpha was never
completed.

Fix this by removing alpha's 32bit pointer support.

As a bit of paranoia refuse to execute any alpha binaries that have
the EF_ALPHA_32BIT flag set.  Just in case someone somewhere has
binaries that try to use alpha's 32bit pointer support.

Link: https://lkml.kernel.org/r/CAFXwXrkgu=4Qn-v1PjnOR4SG0oUb9LSa0g6QXpBq4ttm52pJOQ@mail.gmail.com [1]
Link: https://lkml.kernel.org/r/20250103140148.370368-1-glaubitz@physik.fu-berlin.de [2]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/87y0zfs26i.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/alpha/include/asm/elf.h       |  6 +-----
 arch/alpha/include/asm/pgtable.h   |  2 +-
 arch/alpha/include/asm/processor.h |  8 ++------
 arch/alpha/kernel/osf_sys.c        | 11 ++---------
 4 files changed, 6 insertions(+), 21 deletions(-)

diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index e6da23f1da830..adc87404ef87f 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -139,10 +139,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 635f0a5f5bbde..02e8817a89212 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -360,7 +360,7 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
 
 extern void paging_init(void);
 
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 55bb1c09fd39d..5dce5518a2111 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -8,23 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 5db88b6274396..ebd076fad804f 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1211,8 +1211,7 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
@@ -1234,13 +1233,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
 		       unsigned long flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
-- 
2.39.5

[PATCH 6.6 049/166] vboxsf: fix building with GCC 15

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brahmajit Das <brahmajit.xyz@gmail.com>

[ Upstream commit 4e7487245abcbc5a1a1aea54e4d3b33c53804bda ]

Building with GCC 15 results in build error
fs/vboxsf/super.c:24:54: error: initializer-string for array of ‘unsigned char’ is too long [-Werror=unterminated-string-initialization]
   24 | static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
      |                                                      ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

Due to GCC having enabled -Werror=unterminated-string-initialization[0]
by default. Separately initializing each array element of
VBSF_MOUNT_SIGNATURE to ensure NUL termination, thus satisfying GCC 15
and fixing the build error.

[0]: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wno-unterminated-string-initialization

Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Link: https://lore.kernel.org/r/20250121162648.1408743-1-brahmajit.xyz@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/vboxsf/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/vboxsf/super.c b/fs/vboxsf/super.c
index 9848af78215bf..6e9ebf2321230 100644
--- a/fs/vboxsf/super.c
+++ b/fs/vboxsf/super.c
@@ -21,7 +21,8 @@
 
 #define VBOXSF_SUPER_MAGIC 0x786f4256 /* 'VBox' little endian */
 
-static const unsigned char VBSF_MOUNT_SIGNATURE[4] = "\000\377\376\375";
+static const unsigned char VBSF_MOUNT_SIGNATURE[4] = { '\000', '\377', '\376',
+						       '\375' };
 
 static int follow_symlinks;
 module_param(follow_symlinks, int, 0444);
-- 
2.39.5

[PATCH 6.6 050/166] HID: intel-ish-hid: fix the length of MNG_SYNC_FW_CLOCK in doorbell

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Lixu <lixu.zhang@intel.com>

[ Upstream commit 4b54ae69197b9f416baa0fceadff7e89075f8454 ]

The timestamps in the Firmware log and HID sensor samples are incorrect.
They show 1970-01-01 because the current IPC driver only uses the first
8 bytes of bootup time when synchronizing time with the firmware. The
firmware converts the bootup time to UTC time, which results in the
display of 1970-01-01.

In write_ipc_from_queue(), when sending the MNG_SYNC_FW_CLOCK message,
the clock is updated according to the definition of ipc_time_update_msg.
However, in _ish_sync_fw_clock(), the message length is specified as the
size of uint64_t when building the doorbell. As a result, the firmware
only receives the first 8 bytes of struct ipc_time_update_msg.
This patch corrects the length in the doorbell to ensure the entire
ipc_time_update_msg is sent, fixing the timestamp issue.

Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/intel-ish-hid/ipc/ipc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index dd5fc60874ba1..b1a41c90c5741 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -577,14 +577,14 @@ static void fw_reset_work_fn(struct work_struct *unused)
 static void _ish_sync_fw_clock(struct ishtp_device *dev)
 {
 	static unsigned long	prev_sync;
-	uint64_t	usec;
+	struct ipc_time_update_msg time = {};
 
 	if (prev_sync && time_before(jiffies, prev_sync + 20 * HZ))
 		return;
 
 	prev_sync = jiffies;
-	usec = ktime_to_us(ktime_get_boottime());
-	ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &usec, sizeof(uint64_t));
+	/* The fields of time would be updated while sending message */
+	ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &time, sizeof(time));
 }
 
 /**
-- 
2.39.5

[PATCH 6.6 051/166] HID: intel-ish-hid: Send clock sync message immediately after reset

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Lixu <lixu.zhang@intel.com>

[ Upstream commit 7e0d1cff12b895f44f4ddc8cf50311bc1f775201 ]

The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.

This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.

Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/intel-ish-hid/ipc/ipc.c         | 9 ++++++---
 drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h | 2 ++
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index b1a41c90c5741..42141a78bdb4b 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -517,6 +517,10 @@ static int ish_fw_reset_handler(struct ishtp_device *dev)
 	/* ISH FW is dead */
 	if (!ish_is_input_ready(dev))
 		return	-EPIPE;
+
+	/* Send clock sync at once after reset */
+	ishtp_dev->prev_sync = 0;
+
 	/*
 	 * Set HOST2ISH.ILUP. Apparently we need this BEFORE sending
 	 * RESET_NOTIFY_ACK - FW will be checking for it
@@ -576,13 +580,12 @@ static void fw_reset_work_fn(struct work_struct *unused)
  */
 static void _ish_sync_fw_clock(struct ishtp_device *dev)
 {
-	static unsigned long	prev_sync;
 	struct ipc_time_update_msg time = {};
 
-	if (prev_sync && time_before(jiffies, prev_sync + 20 * HZ))
+	if (dev->prev_sync && time_before(jiffies, dev->prev_sync + 20 * HZ))
 		return;
 
-	prev_sync = jiffies;
+	dev->prev_sync = jiffies;
 	/* The fields of time would be updated while sending message */
 	ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &time, sizeof(time));
 }
diff --git a/drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h b/drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h
index 32142c7d9a043..9b2ee3fe04b8f 100644
--- a/drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h
+++ b/drivers/hid/intel-ish-hid/ishtp/ishtp-dev.h
@@ -212,6 +212,8 @@ struct ishtp_device {
 	unsigned int	ipc_tx_cnt;
 	unsigned long long	ipc_tx_bytes_cnt;
 
+	/* Time of the last clock sync */
+	unsigned long prev_sync;
 	const struct ishtp_hw_ops *ops;
 	size_t	mtu;
 	uint32_t	ishtp_msg_hdr;
-- 
2.39.5

[PATCH 6.6 052/166] HID: ignore non-functional sensor in HP 5MP Camera

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>

[ Upstream commit 363236d709e75610b628c2a4337ccbe42e454b6d ]

The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.

  [453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
  [453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff

Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.

Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 1174626904cb0..ff996accd371d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1085,6 +1085,7 @@
 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001		0x3001
 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3003		0x3003
 #define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008		0x3008
+#define USB_DEVICE_ID_QUANTA_HP_5MP_CAMERA_5473		0x5473
 
 #define I2C_VENDOR_ID_RAYDIUM		0x2386
 #define I2C_PRODUCT_ID_RAYDIUM_4B33	0x4b33
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index e0bbf0c6345d6..5d7a418ccdbec 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -891,6 +891,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, USB_DEVICE_ID_SYNAPTICS_DPAD) },
 #endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_HP_5MP_CAMERA_5473) },
 	{ }
 };
 
-- 
2.39.5

[PATCH 6.6 053/166] usb: phy: generic: Use proper helper for property detection

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 309005e448c1f3e4b81e4416406991b7c3339c1d ]

Since commit c141ecc3cecd7 ("of: Warn when of_property_read_bool() is
used on non-boolean properties") a warning is raised if this function
is used for property detection. of_property_present() is the correct
helper for this.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250120144251.580981-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/phy/phy-generic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 770081b828a42..2b4d2cbafe748 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -217,7 +217,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 		if (of_property_read_u32(node, "clock-frequency", &clk_rate))
 			clk_rate = 0;
 
-		needs_clk = of_property_read_bool(node, "clocks");
+		needs_clk = of_property_present(node, "clocks");
 	}
 	nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
 						   GPIOD_ASIS);
-- 
2.39.5

[PATCH 6.6 054/166] HID: topre: Fix n-key rollover on Realforce R3S TKL boards

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Brackenbury <daniel.brackenbury@gmail.com>

[ Upstream commit 9271af9d846c7e49c8709b58d5853cb73c00b193 ]

Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.

Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/Kconfig     | 3 ++-
 drivers/hid/hid-ids.h   | 1 +
 drivers/hid/hid-topre.c | 7 +++++++
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 9e2cde55b465c..979ebe69c8e30 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1151,7 +1151,8 @@ config HID_TOPRE
 	tristate "Topre REALFORCE keyboards"
 	depends on HID
 	help
-	  Say Y for N-key rollover support on Topre REALFORCE R2 108/87 key keyboards.
+	  Say Y for N-key rollover support on Topre REALFORCE R2 108/87 key and
+          Topre REALFORCE R3S 87 key keyboards.
 
 config HID_THINGM
 	tristate "ThingM blink(1) USB RGB LED"
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index ff996accd371d..b807d01ecca6e 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1285,6 +1285,7 @@
 #define USB_VENDOR_ID_TOPRE			0x0853
 #define USB_DEVICE_ID_TOPRE_REALFORCE_R2_108			0x0148
 #define USB_DEVICE_ID_TOPRE_REALFORCE_R2_87			0x0146
+#define USB_DEVICE_ID_TOPRE_REALFORCE_R3S_87			0x0313
 
 #define USB_VENDOR_ID_TOPSEED		0x0766
 #define USB_DEVICE_ID_TOPSEED_CYBERLINK	0x0204
diff --git a/drivers/hid/hid-topre.c b/drivers/hid/hid-topre.c
index d1d5ca310eadc..e69367267d841 100644
--- a/drivers/hid/hid-topre.c
+++ b/drivers/hid/hid-topre.c
@@ -29,6 +29,11 @@ static __u8 *topre_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		hid_info(hdev,
 			"fixing up Topre REALFORCE keyboard report descriptor\n");
 		rdesc[72] = 0x02;
+	} else if (*rsize >= 106 && rdesc[28] == 0x29 && rdesc[29] == 0xe7 &&
+				    rdesc[30] == 0x81 && rdesc[31] == 0x00) {
+		hid_info(hdev,
+			"fixing up Topre REALFORCE keyboard report descriptor\n");
+		rdesc[31] = 0x02;
 	}
 	return rdesc;
 }
@@ -38,6 +43,8 @@ static const struct hid_device_id topre_id_table[] = {
 			 USB_DEVICE_ID_TOPRE_REALFORCE_R2_108) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPRE,
 			 USB_DEVICE_ID_TOPRE_REALFORCE_R2_87) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPRE,
+			 USB_DEVICE_ID_TOPRE_REALFORCE_R3S_87) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, topre_id_table);
-- 
2.39.5

[PATCH 6.6 055/166] HID: hid-apple: Apple Magic Keyboard a3203 USB-C support

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ievgen Vovk <YevgenVovk@ukr.net>

[ Upstream commit 2813e00dcd748cef47d2bffaa04071de93fddf00 ]

Add Apple Magic Keyboard 2024 model (with USB-C port) device ID (0320)
to those recognized by the hid-apple driver. Keyboard is otherwise
compatible with the existing implementation for its earlier 2021 model.

Signed-off-by: Ievgen Vovk <YevgenVovk@ukr.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 5 +++++
 drivers/hid/hid-ids.h   | 1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index d9e9829b22001..9ff40f3b98064 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -459,6 +459,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 			 hid->product == USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2015)
 			table = magic_keyboard_2015_fn_keys;
 		else if (hid->product == USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021 ||
+			 hid->product == USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2024 ||
 			 hid->product == USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021 ||
 			 hid->product == USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021)
 			table = apple2021_fn_keys;
@@ -1064,6 +1065,10 @@ static const struct hid_device_id apple_devices[] = {
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK | APPLE_RDESC_BATTERY },
 	{ HID_BLUETOOTH_DEVICE(BT_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021),
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2024),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK | APPLE_RDESC_BATTERY },
+	{ HID_BLUETOOTH_DEVICE(BT_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2024),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021),
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_TILDE_QUIRK | APPLE_RDESC_BATTERY },
 	{ HID_BLUETOOTH_DEVICE(BT_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021),
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b807d01ecca6e..09090803f1dd2 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -184,6 +184,7 @@
 #define USB_DEVICE_ID_APPLE_IRCONTROL4	0x8242
 #define USB_DEVICE_ID_APPLE_IRCONTROL5	0x8243
 #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2021   0x029c
+#define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_2024   0x0320
 #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_FINGERPRINT_2021   0x029a
 #define USB_DEVICE_ID_APPLE_MAGIC_KEYBOARD_NUMPAD_2021   0x029f
 #define USB_DEVICE_ID_APPLE_TOUCHBAR_BACKLIGHT 0x8102
-- 
2.39.5

[PATCH 6.6 056/166] HID: apple: fix up the F6 key on the Omoton KB066 keyboard

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Henrie <alexhenrie24@gmail.com>

[ Upstream commit 819083cb6eedcc8495cbf84845877bcc741b93b3 ]

The Omoton KB066 is an Apple A1255 keyboard clone (HID product code
05ac:022c). On both keyboards, the F6 key becomes Num Lock when the Fn
key is held. But unlike its Apple exemplar, when the Omoton's F6 key is
pressed without Fn, it sends the usage code 0xC0301 from the reserved
section of the consumer page instead of the standard F6 usage code
0x7003F from the keyboard page. The nonstandard code is translated to
KEY_UNKNOWN and becomes useless on Linux. The Omoton KB066 is a pretty
popular keyboard, judging from its 29,058 reviews on Amazon at time of
writing, so let's account for its quirk to make it more usable.

By the way, it would be nice if we could automatically set fnmode to 0
for Omoton keyboards because they handle the Fn key internally and the
kernel's Fn key handling creates undesirable side effects such as making
F1 and F2 always Brightness Up and Brightness Down in fnmode=1 (the
default) or always F1 and F2 in fnmode=2. Unfortunately I don't think
there's a way to identify Bluetooth keyboards more specifically than the
HID product code which is obviously inaccurate. Users of Omoton
keyboards will just have to set fnmode to 0 manually to get full Fn key
functionality.

Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 9ff40f3b98064..9f3480ef524c1 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -531,6 +531,9 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		}
 	}
 
+	if (usage->hid == 0xc0301) /* Omoton KB066 quirk */
+		code = KEY_F6;
+
 	if (usage->code != code) {
 		input_event_with_scancode(input, usage->type, code, usage->hid, value);
 
-- 
2.39.5

[PATCH 6.6 057/166] objtool: Ignore dangling jump table entries

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <jpoimboe@kernel.org>

[ Upstream commit 3724062ca2b1364f02cf44dbea1a552227844ad1 ]

Clang sometimes leaves dangling unused jump table entries which point to
the end of the function.  Ignore them.

Closes: https://lore.kernel.org/20250113235835.vqgvb7cdspksy5dn@jpoimboe
Reported-by: Klaus Kusche <klaus.kusche@computerix.info>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ee25c0b7e80113e950bd1d4c208b671d35774ff4.1736891751.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 1b242c3c2d451..6e59e7f578ffe 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -2028,6 +2028,14 @@ static int add_jump_table(struct objtool_file *file, struct instruction *insn,
 		    reloc_addend(reloc) == pfunc->offset)
 			break;
 
+		/*
+		 * Clang sometimes leaves dangling unused jump table entries
+		 * which point to the end of the function.  Ignore them.
+		 */
+		if (reloc->sym->sec == pfunc->sec &&
+		    reloc_addend(reloc) == pfunc->offset + pfunc->len)
+			goto next;
+
 		dest_insn = find_insn(file, reloc->sym->sec, reloc_addend(reloc));
 		if (!dest_insn)
 			break;
@@ -2045,6 +2053,7 @@ static int add_jump_table(struct objtool_file *file, struct instruction *insn,
 		alt->insn = dest_insn;
 		alt->next = insn->alts;
 		insn->alts = alt;
+next:
 		prev_offset = reloc_offset(reloc);
 	}
 
-- 
2.39.5

[PATCH 6.6 058/166] sched: Clarify wake_up_q()s write to task->wake_q.next

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jannh@google.com>

[ Upstream commit bcc6244e13b4d4903511a1ea84368abf925031c0 ]

Clarify that wake_up_q() does an atomic write to task->wake_q.next, after
which a concurrent __wake_q_add() can immediately overwrite
task->wake_q.next again.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129-sched-wakeup-prettier-v1-1-2f51f5f663fa@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 3d6dc03e4a7d3..942734bf7347d 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1019,9 +1019,10 @@ void wake_up_q(struct wake_q_head *head)
 		struct task_struct *task;
 
 		task = container_of(node, struct task_struct, wake_q);
-		/* Task can safely be re-inserted now: */
 		node = node->next;
-		task->wake_q.next = NULL;
+		/* pairs with cmpxchg_relaxed() in __wake_q_add() */
+		WRITE_ONCE(task->wake_q.next, NULL);
+		/* Task can safely be re-inserted now. */
 
 		/*
 		 * wake_up_process() executes a full barrier, which pairs with
-- 
2.39.5

[PATCH 6.6 059/166] platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sybil Isabel Dorsett <sybdorsett@proton.me>

[ Upstream commit 1046cac109225eda0973b898e053aeb3d6c10e1d ]

On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.

Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.

Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.

Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 692bd6fea3744..b11f5ac658e01 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -7961,6 +7961,7 @@ static struct ibm_struct volume_driver_data = {
 
 #define FAN_NS_CTRL_STATUS	BIT(2)		/* Bit which determines control is enabled or not */
 #define FAN_NS_CTRL		BIT(4)		/* Bit which determines control is by host or EC */
+#define FAN_CLOCK_TPM		(22500*60)	/* Ticks per minute for a 22.5 kHz clock */
 
 enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
@@ -8014,6 +8015,7 @@ static int fan_watchdog_maxinterval;
 
 static bool fan_with_ns_addr;
 static bool ecfw_with_fan_dec_rpm;
+static bool fan_speed_in_tpr;
 
 static struct mutex fan_mutex;
 
@@ -8195,8 +8197,11 @@ static int fan_get_speed(unsigned int *speed)
 			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 	case TPACPI_FAN_RD_TPEC_NS:
 		if (!acpi_ec_read(fan_rpm_status_ns, &lo))
@@ -8229,8 +8234,11 @@ static int fan2_get_speed(unsigned int *speed)
 		if (rc)
 			return -EIO;
 
-		if (likely(speed))
+		if (likely(speed)) {
 			*speed = (hi << 8) | lo;
+			if (fan_speed_in_tpr && *speed != 0)
+				*speed = FAN_CLOCK_TPM / *speed;
+		}
 		break;
 
 	case TPACPI_FAN_RD_TPEC_NS:
@@ -8758,6 +8766,7 @@ static const struct attribute_group fan_driver_attr_group = {
 #define TPACPI_FAN_NOFAN	0x0008		/* no fan available */
 #define TPACPI_FAN_NS		0x0010		/* For EC with non-Standard register addresses */
 #define TPACPI_FAN_DECRPM	0x0020		/* For ECFW's with RPM in register as decimal */
+#define TPACPI_FAN_TPR		0x0040		/* Fan speed is in Ticks Per Revolution */
 
 static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1),
@@ -8780,6 +8789,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS),	/* X13 Yoga Gen 2*/
 	TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN),	/* X1 Tablet (2nd gen) */
 	TPACPI_Q_LNV3('R', '0', 'Q', TPACPI_FAN_DECRPM),/* L480 */
+	TPACPI_Q_LNV('8', 'F', TPACPI_FAN_TPR),		/* ThinkPad x120e */
 };
 
 static int __init fan_init(struct ibm_init_struct *iibm)
@@ -8843,6 +8853,8 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 
 			if (quirks & TPACPI_FAN_Q1)
 				fan_quirk1_setup();
+			if (quirks & TPACPI_FAN_TPR)
+				fan_speed_in_tpr = true;
 			/* Try and probe the 2nd fan */
 			tp_features.second_fan = 1; /* needed for get_speed to work */
 			res = fan2_get_speed(&speed);
-- 
2.39.5

[PATCH 6.6 060/166] platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Pearson <mpearson-lenovo@squebb.ca>

[ Upstream commit 9cff907cbf8c7fb5345918dbcc7b74a01656f34f ]

Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 34 ++++++++++++++++++----------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index b11f5ac658e01..cde5f845cf255 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -10283,6 +10283,10 @@ static struct ibm_struct proxsensor_driver_data = {
 #define DYTC_MODE_PSC_BALANCE  5  /* Default mode aka balanced */
 #define DYTC_MODE_PSC_PERFORM  7  /* High power mode aka performance */
 
+#define DYTC_MODE_PSCV9_LOWPOWER 1  /* Low power mode */
+#define DYTC_MODE_PSCV9_BALANCE  3  /* Default mode aka balanced */
+#define DYTC_MODE_PSCV9_PERFORM  4  /* High power mode aka performance */
+
 #define DYTC_ERR_MASK       0xF  /* Bits 0-3 in cmd result are the error result */
 #define DYTC_ERR_SUCCESS      1  /* CMD completed successful */
 
@@ -10303,6 +10307,10 @@ static int dytc_capabilities;
 static bool dytc_mmc_get_available;
 static int profile_force;
 
+static int platform_psc_profile_lowpower = DYTC_MODE_PSC_LOWPOWER;
+static int platform_psc_profile_balanced = DYTC_MODE_PSC_BALANCE;
+static int platform_psc_profile_performance = DYTC_MODE_PSC_PERFORM;
+
 static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		enum platform_profile_option *profile)
 {
@@ -10324,19 +10332,15 @@ static int convert_dytc_to_profile(int funcmode, int dytcmode,
 		}
 		return 0;
 	case DYTC_FUNCTION_PSC:
-		switch (dytcmode) {
-		case DYTC_MODE_PSC_LOWPOWER:
+		if (dytcmode == platform_psc_profile_lowpower)
 			*profile = PLATFORM_PROFILE_LOW_POWER;
-			break;
-		case DYTC_MODE_PSC_BALANCE:
+		else if (dytcmode == platform_psc_profile_balanced)
 			*profile =  PLATFORM_PROFILE_BALANCED;
-			break;
-		case DYTC_MODE_PSC_PERFORM:
+		else if (dytcmode == platform_psc_profile_performance)
 			*profile =  PLATFORM_PROFILE_PERFORMANCE;
-			break;
-		default: /* Unknown mode */
+		else
 			return -EINVAL;
-		}
+
 		return 0;
 	case DYTC_FUNCTION_AMT:
 		/* For now return balanced. It's the closest we have to 'auto' */
@@ -10357,19 +10361,19 @@ static int convert_profile_to_dytc(enum platform_profile_option profile, int *pe
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_LOWPOWER;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_LOWPOWER;
+			*perfmode = platform_psc_profile_lowpower;
 		break;
 	case PLATFORM_PROFILE_BALANCED:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_BALANCE;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_BALANCE;
+			*perfmode = platform_psc_profile_balanced;
 		break;
 	case PLATFORM_PROFILE_PERFORMANCE:
 		if (dytc_capabilities & BIT(DYTC_FC_MMC))
 			*perfmode = DYTC_MODE_MMC_PERFORM;
 		else if (dytc_capabilities & BIT(DYTC_FC_PSC))
-			*perfmode = DYTC_MODE_PSC_PERFORM;
+			*perfmode = platform_psc_profile_performance;
 		break;
 	default: /* Unknown profile */
 		return -EOPNOTSUPP;
@@ -10558,6 +10562,7 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	if (output & BIT(DYTC_QUERY_ENABLE_BIT))
 		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
 
+	dbg_printk(TPACPI_DBG_INIT, "DYTC version %d\n", dytc_version);
 	/* Check DYTC is enabled and supports mode setting */
 	if (dytc_version < 5)
 		return -ENODEV;
@@ -10596,6 +10601,11 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 		}
 	} else if (dytc_capabilities & BIT(DYTC_FC_PSC)) { /* PSC MODE */
 		pr_debug("PSC is supported\n");
+		if (dytc_version >= 9) { /* update profiles for DYTC 9 and up */
+			platform_psc_profile_lowpower = DYTC_MODE_PSCV9_LOWPOWER;
+			platform_psc_profile_balanced = DYTC_MODE_PSCV9_BALANCE;
+			platform_psc_profile_performance = DYTC_MODE_PSCV9_PERFORM;
+		}
 	} else {
 		dbg_printk(TPACPI_DBG_INIT, "No DYTC support available\n");
 		return -ENODEV;
-- 
2.39.5

[PATCH 6.6 061/166] s390/cio: Fix CHPID "configure" attribute caching

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Oberparleiter <oberpar@linux.ibm.com>

[ Upstream commit 32ae4a2992529e2c7934e422035fad1d9b0f1fb5 ]

In some environments, the SCLP firmware interface used to query a
CHPID's configured state is not supported. On these environments,
rapidly reading the corresponding sysfs attribute produces inconsistent
results:

  $ cat /sys/devices/css0/chp0.00/configure
  cat: /sys/devices/css0/chp0.00/configure: Operation not supported
  $ cat /sys/devices/css0/chp0.00/configure
  3

This occurs for example when Linux is run as a KVM guest. The
inconsistency is a result of CIO using cached results for generating
the value of the "configure" attribute while failing to handle the
situation where no data was returned by SCLP.

Fix this by not updating the cache-expiration timestamp when SCLP
returns no data. With the fix applied, the system response is
consistent:

  $ cat /sys/devices/css0/chp0.00/configure
  cat: /sys/devices/css0/chp0.00/configure: Operation not supported
  $ cat /sys/devices/css0/chp0.00/configure
  cat: /sys/devices/css0/chp0.00/configure: Operation not supported

Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/chp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 5440f285f3494..7e00c061538db 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -661,7 +661,8 @@ static int info_update(void)
 	if (time_after(jiffies, chp_info_expires)) {
 		/* Data is too old, update. */
 		rc = sclp_chp_read_info(&chp_info);
-		chp_info_expires = jiffies + CHP_INFO_UPDATE_INTERVAL ;
+		if (!rc)
+			chp_info_expires = jiffies + CHP_INFO_UPDATE_INTERVAL;
 	}
 	mutex_unlock(&info_lock);
 
-- 
2.39.5

[PATCH 6.6 062/166] thermal/cpufreq_cooling: Remove structure member documentation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Lezcano <daniel.lezcano@linaro.org>

[ Upstream commit a6768c4f92e152265590371975d44c071a5279c7 ]

The structure member documentation refers to a member which does not
exist any more. Remove it.

Link: https://lore.kernel.org/all/202501220046.h3PMBCti-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501220046.h3PMBCti-lkp@intel.com/
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250211084712.2746705-1-daniel.lezcano@linaro.org
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/cpufreq_cooling.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c
index e2cc7bd308620..874b4838d2c92 100644
--- a/drivers/thermal/cpufreq_cooling.c
+++ b/drivers/thermal/cpufreq_cooling.c
@@ -57,8 +57,6 @@ struct time_in_idle {
  * @max_level: maximum cooling level. One less than total number of valid
  *	cpufreq frequencies.
  * @em: Reference on the Energy Model of the device
- * @cdev: thermal_cooling_device pointer to keep track of the
- *	registered cooling device.
  * @policy: cpufreq policy.
  * @cooling_ops: cpufreq callbacks to thermal cooling device ops
  * @idle_time: idle time stats
-- 
2.39.5

[PATCH 6.6 063/166] Xen/swiotlb: mark xen_swiotlb_fixup() __init

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit 75ad02318af2e4ae669e26a79f001bd5e1f97472 ]

It's sole user (pci_xen_swiotlb_init()) is __init, too.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

Message-ID: <e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/swiotlb-xen.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index b6e54ab3b6f3b..0b3bd9a7575e5 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -112,7 +112,7 @@ static int is_xen_swiotlb_buffer(struct device *dev, dma_addr_t dma_addr)
 }
 
 #ifdef CONFIG_X86
-int xen_swiotlb_fixup(void *buf, unsigned long nslabs)
+int __init xen_swiotlb_fixup(void *buf, unsigned long nslabs)
 {
 	int rc;
 	unsigned int order = get_order(IO_TLB_SEGSIZE << IO_TLB_SHIFT);
-- 
2.39.5

[PATCH 6.6 064/166] Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit b4f82f9ed43aefa79bec2504ae8c29be0c0f5d1d ]

After the hci sync command releases l2cap_conn, the hci receive data work
queue references the released l2cap_conn when sending to the upper layer.
Add hci dev lock to the hci receive data work queue to synchronize the two.

[1]
BUG: KASAN: slab-use-after-free in l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954
Read of size 8 at addr ffff8880271a4000 by task kworker/u9:2/5837

CPU: 0 UID: 0 PID: 5837 Comm: kworker/u9:2 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: hci1 hci_rx_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:378 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:489
 kasan_report+0x143/0x180 mm/kasan/report.c:602
 l2cap_build_cmd net/bluetooth/l2cap_core.c:2964 [inline]
 l2cap_send_cmd+0x187/0x8d0 net/bluetooth/l2cap_core.c:954
 l2cap_sig_send_rej net/bluetooth/l2cap_core.c:5502 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5538 [inline]
 l2cap_recv_frame+0x221f/0x10db0 net/bluetooth/l2cap_core.c:6817
 hci_acldata_packet net/bluetooth/hci_core.c:3797 [inline]
 hci_rx_work+0x508/0xdb0 net/bluetooth/hci_core.c:4040
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
 worker_thread+0x870/0xd30 kernel/workqueue.c:3391
 kthread+0x2f0/0x390 kernel/kthread.c:389
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
 </TASK>

Allocated by task 5837:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
 __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
 kasan_kmalloc include/linux/kasan.h:260 [inline]
 __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329
 kmalloc_noprof include/linux/slab.h:901 [inline]
 kzalloc_noprof include/linux/slab.h:1037 [inline]
 l2cap_conn_add+0xa9/0x8e0 net/bluetooth/l2cap_core.c:6860
 l2cap_connect_cfm+0x115/0x1090 net/bluetooth/l2cap_core.c:7239
 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline]
 hci_remote_features_evt+0x68e/0xac0 net/bluetooth/hci_event.c:3726
 hci_event_func net/bluetooth/hci_event.c:7473 [inline]
 hci_event_packet+0xac2/0x1540 net/bluetooth/hci_event.c:7525
 hci_rx_work+0x3f3/0xdb0 net/bluetooth/hci_core.c:4035
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
 worker_thread+0x870/0xd30 kernel/workqueue.c:3391
 kthread+0x2f0/0x390 kernel/kthread.c:389
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Freed by task 54:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
 poison_slab_object mm/kasan/common.c:247 [inline]
 __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
 kasan_slab_free include/linux/kasan.h:233 [inline]
 slab_free_hook mm/slub.c:2353 [inline]
 slab_free mm/slub.c:4613 [inline]
 kfree+0x196/0x430 mm/slub.c:4761
 l2cap_connect_cfm+0xcc/0x1090 net/bluetooth/l2cap_core.c:7235
 hci_connect_cfm include/net/bluetooth/hci_core.h:2057 [inline]
 hci_conn_failed+0x287/0x400 net/bluetooth/hci_conn.c:1266
 hci_abort_conn_sync+0x56c/0x11f0 net/bluetooth/hci_sync.c:5603
 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332
 process_one_work kernel/workqueue.c:3229 [inline]
 process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
 worker_thread+0x870/0xd30 kernel/workqueue.c:3391
 kthread+0x2f0/0x390 kernel/kthread.c:389
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Reported-by: syzbot+31c2f641b850a348a734@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=31c2f641b850a348a734
Tested-by: syzbot+31c2f641b850a348a734@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 39 +++++++++++++++++++++++++++++++++-----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 76a85d8b17574..f0d40b4918e59 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -949,6 +949,16 @@ static u8 l2cap_get_ident(struct l2cap_conn *conn)
 	return id;
 }
 
+static void l2cap_send_acl(struct l2cap_conn *conn, struct sk_buff *skb,
+			   u8 flags)
+{
+	/* Check if the hcon still valid before attempting to send */
+	if (hci_conn_valid(conn->hcon->hdev, conn->hcon))
+		hci_send_acl(conn->hchan, skb, flags);
+	else
+		kfree_skb(skb);
+}
+
 static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
 			   void *data)
 {
@@ -971,7 +981,7 @@ static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
 	bt_cb(skb)->force_active = BT_POWER_FORCE_ACTIVE_ON;
 	skb->priority = HCI_PRIO_MAX;
 
-	hci_send_acl(conn->hchan, skb, flags);
+	l2cap_send_acl(conn, skb, flags);
 }
 
 static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
@@ -1793,13 +1803,10 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err)
 
 	mutex_unlock(&conn->chan_lock);
 
-	hci_chan_del(conn->hchan);
-
 	if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
 		cancel_delayed_work_sync(&conn->info_timer);
 
 	hcon->l2cap_data = NULL;
-	conn->hchan = NULL;
 	l2cap_conn_put(conn);
 }
 
@@ -1807,6 +1814,7 @@ static void l2cap_conn_free(struct kref *ref)
 {
 	struct l2cap_conn *conn = container_of(ref, struct l2cap_conn, ref);
 
+	hci_chan_del(conn->hchan);
 	hci_conn_put(conn->hcon);
 	kfree(conn);
 }
@@ -7478,14 +7486,33 @@ static void l2cap_recv_reset(struct l2cap_conn *conn)
 	conn->rx_len = 0;
 }
 
+static struct l2cap_conn *l2cap_conn_hold_unless_zero(struct l2cap_conn *c)
+{
+	BT_DBG("conn %p orig refcnt %u", c, kref_read(&c->ref));
+
+	if (!kref_get_unless_zero(&c->ref))
+		return NULL;
+
+	return c;
+}
+
 void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 {
-	struct l2cap_conn *conn = hcon->l2cap_data;
+	struct l2cap_conn *conn;
 	int len;
 
+	/* Lock hdev to access l2cap_data to avoid race with l2cap_conn_del */
+	hci_dev_lock(hcon->hdev);
+
+	conn = hcon->l2cap_data;
+
 	if (!conn)
 		conn = l2cap_conn_add(hcon);
 
+	conn = l2cap_conn_hold_unless_zero(conn);
+
+	hci_dev_unlock(hcon->hdev);
+
 	if (!conn)
 		goto drop;
 
@@ -7577,6 +7604,8 @@ void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
 		break;
 	}
 
+	l2cap_conn_put(conn);
+
 drop:
 	kfree_skb(skb);
 }
-- 
2.39.5

[PATCH 6.6 065/166] selftests/bpf: Fix invalid flag of recv()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiayuan Chen <mrpre@163.com>

[ Upstream commit a0c11149509aa905aeec10cf9998091443472b0b ]

SOCK_NONBLOCK flag is only effective during socket creation, not during
recv. Use MSG_DONTWAIT instead.

Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-5-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/sockmap_basic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
index dda7060e86a09..b16d765a153a9 100644
--- a/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
+++ b/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
@@ -402,8 +402,8 @@ static void test_sockmap_skb_verdict_shutdown(void)
 	if (!ASSERT_EQ(err, 1, "epoll_wait(fd)"))
 		goto out_close;
 
-	n = recv(c1, &b, 1, SOCK_NONBLOCK);
-	ASSERT_EQ(n, 0, "recv_timeout(fin)");
+	n = recv(c1, &b, 1, MSG_DONTWAIT);
+	ASSERT_EQ(n, 0, "recv(fin)");
 out_close:
 	close(c1);
 	close(p1);
@@ -459,7 +459,7 @@ static void test_sockmap_skb_verdict_fionread(bool pass_prog)
 	ASSERT_EQ(avail, expected, "ioctl(FIONREAD)");
 	/* On DROP test there will be no data to read */
 	if (pass_prog) {
-		recvd = recv_timeout(c1, &buf, sizeof(buf), SOCK_NONBLOCK, IO_TIMEOUT_SEC);
+		recvd = recv_timeout(c1, &buf, sizeof(buf), MSG_DONTWAIT, IO_TIMEOUT_SEC);
 		ASSERT_EQ(recvd, sizeof(buf), "recv_timeout(c0)");
 	}
 
-- 
2.39.5

[PATCH 6.6 066/166] ASoC: simple-card-utils.c: add missing dlc->of_node

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit dabbd325b25edb5cdd99c94391817202dd54b651 ]

commit 90de551c1bf ("ASoC: simple-card-utils.c: enable multi Component
support") added muiti Component support, but was missing to add
dlc->of_node. Because of it, Sound device list will indicates strange
name if it was DPCM connection and driver supports dai->driver->dai_args,
like below

	> aplay -l
	card X: sndulcbmix [xxxx], device 0: fe.(null).rsnd-dai.0 (*) []
	...                                     ^^^^^^

It will be fixed by this patch

	> aplay -l
	card X: sndulcbmix [xxxx], device 0: fe.sound@ec500000.rsnd-dai.0 (*) []
	...                                     ^^^^^^^^^^^^^^

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/87ikpp2rtb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/generic/simple-card-utils.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 2588ec735dbdf..598b0000df244 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -1086,6 +1086,7 @@ int asoc_graph_parse_dai(struct device *dev, struct device_node *ep,
 	args.np = ep;
 	dai = snd_soc_get_dai_via_args(&args);
 	if (dai) {
+		dlc->of_node  = node;
 		dlc->dai_name = snd_soc_dai_name_get(dai);
 		dlc->dai_args = snd_soc_copy_dai_args(dev, &args);
 		if (!dlc->dai_args)
-- 
2.39.5

[PATCH 6.6 067/166] ALSA: hda/realtek: Limit mic boost on Positivo ARN50

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>

[ Upstream commit 76b0a22d4cf7dc9091129560fdc04e73eb9db4cb ]

The internal mic boost on the Positivo ARN50 is too high.
Fix this by applying the ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine
to limit the gain.

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250201143930.25089-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ec57148453c82..1fd6e84b0e371 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10527,6 +10527,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1f66, 0x0105, "Ayaneo Portable Game Player", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x2014, 0x800a, "Positivo ARN50", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x2782, 0x0214, "VAIO VJFE-CL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x2782, 0x0228, "Infinix ZERO BOOK 13", ALC269VB_FIXUP_INFINIX_ZERO_BOOK_13),
 	SND_PCI_QUIRK(0x2782, 0x0232, "CHUWI CoreBook XPro", ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO),
-- 
2.39.5

[PATCH 6.6 068/166] ASoC: rsnd: indicate unsupported clock rate

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 796106e29e5df6cd4b4e2b51262a8a19e9fa0625 ]

It will indicate "unsupported clock rate" when setup clock failed.
But it is unclear what kind of rate was failed. Indicate it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/874j192qej.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 690ac0d6ef41a..2a9e8d20c23c3 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -334,7 +334,8 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
 	return 0;
 
 rate_err:
-	dev_err(dev, "unsupported clock rate\n");
+	dev_err(dev, "unsupported clock rate (%d)\n", rate);
+
 	return ret;
 }
 
-- 
2.39.5

[PATCH 6.6 069/166] ASoC: rsnd: dont indicate warning on rsnd_kctrl_accept_runtime()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit c3fc002b206c6c83d1e3702b979733002ba6fb2c ]

rsnd_kctrl_accept_runtime() (1) is used for runtime convert rate
(= Synchronous SRC Mode). Now, rsnd driver has 2 kctrls for it

(A):	"SRC Out Rate Switch"
(B):	"SRC Out Rate"		// it calls (1)

(A): can be called anytime
(B): can be called only runtime, and will indicate warning if it was used
   at non-runtime.

To use runtime convert rate (= Synchronous SRC Mode), user might uses
command in below order.

(X):	> amixer set "SRC Out Rate" on
	> aplay xxx.wav &
(Y):	> amixer set "SRC Out Rate" 48010 // convert rate to 48010Hz

(Y): calls B
(X): calls both A and B.

In this case, when user calls (X), it calls both (A) and (B), but it is not
yet start running. So, (B) will indicate warning.

This warning was added by commit b5c088689847 ("ASoC: rsnd: add warning
message to rsnd_kctrl_accept_runtime()"), but the message sounds like the
operation was not correct. Let's update warning message.

The message is very SRC specific, implement it in src.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/8734gt2qed.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/core.c | 14 --------------
 sound/soc/sh/rcar/rsnd.h |  1 -
 sound/soc/sh/rcar/src.c  | 18 +++++++++++++++++-
 3 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index 98c7be340a536..3cd14fbca28ea 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -1775,20 +1775,6 @@ int rsnd_kctrl_accept_anytime(struct rsnd_dai_stream *io)
 	return 1;
 }
 
-int rsnd_kctrl_accept_runtime(struct rsnd_dai_stream *io)
-{
-	struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
-	struct rsnd_priv *priv = rsnd_io_to_priv(io);
-	struct device *dev = rsnd_priv_to_dev(priv);
-
-	if (!runtime) {
-		dev_warn(dev, "Can't update kctrl when idle\n");
-		return 0;
-	}
-
-	return 1;
-}
-
 struct rsnd_kctrl_cfg *rsnd_kctrl_init_m(struct rsnd_kctrl_cfg_m *cfg)
 {
 	cfg->cfg.val = cfg->val;
diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h
index 43c0d675cc343..1214dbba6898b 100644
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -755,7 +755,6 @@ struct rsnd_kctrl_cfg_s {
 #define rsnd_kctrl_vals(x)	((x).val)	/* = (x).cfg.val[0] */
 
 int rsnd_kctrl_accept_anytime(struct rsnd_dai_stream *io);
-int rsnd_kctrl_accept_runtime(struct rsnd_dai_stream *io);
 struct rsnd_kctrl_cfg *rsnd_kctrl_init_m(struct rsnd_kctrl_cfg_m *cfg);
 struct rsnd_kctrl_cfg *rsnd_kctrl_init_s(struct rsnd_kctrl_cfg_s *cfg);
 int rsnd_kctrl_new(struct rsnd_mod *mod,
diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c
index f832165e46bc0..9893839666d7b 100644
--- a/sound/soc/sh/rcar/src.c
+++ b/sound/soc/sh/rcar/src.c
@@ -530,6 +530,22 @@ static irqreturn_t rsnd_src_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int rsnd_src_kctrl_accept_runtime(struct rsnd_dai_stream *io)
+{
+	struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
+
+	if (!runtime) {
+		struct rsnd_priv *priv = rsnd_io_to_priv(io);
+		struct device *dev = rsnd_priv_to_dev(priv);
+
+		dev_warn(dev, "\"SRC Out Rate\" can use during running\n");
+
+		return 0;
+	}
+
+	return 1;
+}
+
 static int rsnd_src_probe_(struct rsnd_mod *mod,
 			   struct rsnd_dai_stream *io,
 			   struct rsnd_priv *priv)
@@ -593,7 +609,7 @@ static int rsnd_src_pcm_new(struct rsnd_mod *mod,
 			       rsnd_io_is_play(io) ?
 			       "SRC Out Rate" :
 			       "SRC In Rate",
-			       rsnd_kctrl_accept_runtime,
+			       rsnd_src_kctrl_accept_runtime,
 			       rsnd_src_set_convert_rate,
 			       &src->sync, 192000);
 
-- 
2.39.5

[PATCH 6.6 070/166] ASoC: rsnd: adjust convert rate limitation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit 89f9cf185885d4358aa92b48e51d0f09b71775aa ]

Current rsnd driver supports Synchronous SRC Mode, but HW allow to update
rate only within 1% from current rate. Adjust to it.

Becially, this feature is used to fine-tune subtle difference that occur
during sampling rate conversion in SRC. So, it should be called within 1%
margin of rate difference.

If there was difference over 1%, it will apply with 1% increments by using
loop without indicating error message.

Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://patch.msgid.link/871pwd2qe8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/src.c | 98 ++++++++++++++++++++++++++++++++---------
 1 file changed, 76 insertions(+), 22 deletions(-)

diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c
index 9893839666d7b..e985681363e25 100644
--- a/sound/soc/sh/rcar/src.c
+++ b/sound/soc/sh/rcar/src.c
@@ -34,6 +34,7 @@ struct rsnd_src {
 	struct rsnd_mod *dma;
 	struct rsnd_kctrl_cfg_s sen;  /* sync convert enable */
 	struct rsnd_kctrl_cfg_s sync; /* sync convert */
+	u32 current_sync_rate;
 	int irq;
 };
 
@@ -99,7 +100,7 @@ static u32 rsnd_src_convert_rate(struct rsnd_dai_stream *io,
 	if (!rsnd_src_sync_is_enabled(mod))
 		return rsnd_io_converted_rate(io);
 
-	convert_rate = src->sync.val;
+	convert_rate = src->current_sync_rate;
 
 	if (!convert_rate)
 		convert_rate = rsnd_io_converted_rate(io);
@@ -200,13 +201,73 @@ static const u32 chan222222[] = {
 static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io,
 				      struct rsnd_mod *mod)
 {
+	struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
 	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
-	struct device *dev = rsnd_priv_to_dev(priv);
+	struct rsnd_src *src = rsnd_mod_to_src(mod);
+	u32 fin, fout, new_rate;
+	int inc, cnt, rate;
+	u64 base, val;
+
+	if (!runtime)
+		return;
+
+	if (!rsnd_src_sync_is_enabled(mod))
+		return;
+
+	fin	= rsnd_src_get_in_rate(priv, io);
+	fout	= rsnd_src_get_out_rate(priv, io);
+
+	new_rate = src->sync.val;
+
+	if (!new_rate)
+		new_rate = fout;
+
+	/* Do nothing if no diff */
+	if (new_rate == src->current_sync_rate)
+		return;
+
+	/*
+	 * SRCm_IFSVR::INTIFS can change within 1%
+	 * see
+	 *	SRCm_IFSVR::INTIFS Note
+	 */
+	inc = fout / 100;
+	cnt = abs(new_rate - fout) / inc;
+	if (fout > new_rate)
+		inc *= -1;
+
+	/*
+	 * After start running SRC, we can update only SRC_IFSVR
+	 * for Synchronous Mode
+	 */
+	base = (u64)0x0400000 * fin;
+	rate  = fout;
+	for (int i = 0; i < cnt; i++) {
+		val   = base;
+		rate += inc;
+		do_div(val, rate);
+
+		rsnd_mod_write(mod, SRC_IFSVR, val);
+	}
+	val   = base;
+	do_div(val, new_rate);
+
+	rsnd_mod_write(mod, SRC_IFSVR, val);
+
+	/* update current_sync_rate */
+	src->current_sync_rate = new_rate;
+}
+
+static void rsnd_src_init_convert_rate(struct rsnd_dai_stream *io,
+				       struct rsnd_mod *mod)
+{
 	struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
+	struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
+	struct device *dev = rsnd_priv_to_dev(priv);
 	int is_play = rsnd_io_is_play(io);
 	int use_src = 0;
 	u32 fin, fout;
-	u32 ifscr, fsrate, adinr;
+	u32 ifscr, adinr;
 	u32 cr, route;
 	u32 i_busif, o_busif, tmp;
 	const u32 *bsdsr_table;
@@ -244,26 +305,15 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io,
 	adinr = rsnd_get_adinr_bit(mod, io) | chan;
 
 	/*
-	 * SRC_IFSCR / SRC_IFSVR
-	 */
-	ifscr = 0;
-	fsrate = 0;
-	if (use_src) {
-		u64 n;
-
-		ifscr = 1;
-		n = (u64)0x0400000 * fin;
-		do_div(n, fout);
-		fsrate = n;
-	}
-
-	/*
+	 * SRC_IFSCR
 	 * SRC_SRCCR / SRC_ROUTE_MODE0
 	 */
+	ifscr	= 0;
 	cr	= 0x00011110;
 	route	= 0x0;
 	if (use_src) {
 		route	= 0x1;
+		ifscr	= 0x1;
 
 		if (rsnd_src_sync_is_enabled(mod)) {
 			cr |= 0x1;
@@ -334,7 +384,6 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io,
 	rsnd_mod_write(mod, SRC_SRCIR, 1);	/* initialize */
 	rsnd_mod_write(mod, SRC_ADINR, adinr);
 	rsnd_mod_write(mod, SRC_IFSCR, ifscr);
-	rsnd_mod_write(mod, SRC_IFSVR, fsrate);
 	rsnd_mod_write(mod, SRC_SRCCR, cr);
 	rsnd_mod_write(mod, SRC_BSDSR, bsdsr_table[idx]);
 	rsnd_mod_write(mod, SRC_BSISR, bsisr_table[idx]);
@@ -347,6 +396,9 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io,
 
 	rsnd_adg_set_src_timesel_gen2(mod, io, fin, fout);
 
+	/* update SRC_IFSVR */
+	rsnd_src_set_convert_rate(io, mod);
+
 	return;
 
 convert_rate_err:
@@ -466,7 +518,8 @@ static int rsnd_src_init(struct rsnd_mod *mod,
 	int ret;
 
 	/* reset sync convert_rate */
-	src->sync.val = 0;
+	src->sync.val		=
+	src->current_sync_rate	= 0;
 
 	ret = rsnd_mod_power_on(mod);
 	if (ret < 0)
@@ -474,7 +527,7 @@ static int rsnd_src_init(struct rsnd_mod *mod,
 
 	rsnd_src_activation(mod);
 
-	rsnd_src_set_convert_rate(io, mod);
+	rsnd_src_init_convert_rate(io, mod);
 
 	rsnd_src_status_clear(mod);
 
@@ -492,7 +545,8 @@ static int rsnd_src_quit(struct rsnd_mod *mod,
 	rsnd_mod_power_off(mod);
 
 	/* reset sync convert_rate */
-	src->sync.val = 0;
+	src->sync.val		=
+	src->current_sync_rate	= 0;
 
 	return 0;
 }
@@ -600,7 +654,7 @@ static int rsnd_src_pcm_new(struct rsnd_mod *mod,
 			       "SRC Out Rate Switch" :
 			       "SRC In Rate Switch",
 			       rsnd_kctrl_accept_anytime,
-			       rsnd_src_set_convert_rate,
+			       rsnd_src_init_convert_rate,
 			       &src->sen, 1);
 	if (ret < 0)
 		return ret;
-- 
2.39.5

[PATCH 6.6 071/166] ASoC: arizona/madera: use fsleep() in up/down DAPM event delays.

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>

[ Upstream commit 679074942c2502a95842a80471d8fb718165ac77 ]

Using `fsleep` instead of `msleep` resolves some customer complaints
regarding the precision of up/down DAPM event timing. `fsleep()`
automatically selects the appropriate sleep function, making the delay
time more predictable.

Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20250205160849.500306-1-vitalyr@opensource.cirrus.com
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/arizona.c | 14 +++++++-------
 sound/soc/codecs/madera.c  | 10 +++++-----
 sound/soc/codecs/wm5110.c  |  8 ++++----
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index 402b9a2ff0240..68cdb1027d0c0 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -967,7 +967,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w,
 		case ARIZONA_OUT3L_ENA_SHIFT:
 		case ARIZONA_OUT3R_ENA_SHIFT:
 			priv->out_up_pending++;
-			priv->out_up_delay += 17;
+			priv->out_up_delay += 17000;
 			break;
 		case ARIZONA_OUT4L_ENA_SHIFT:
 		case ARIZONA_OUT4R_ENA_SHIFT:
@@ -977,7 +977,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w,
 			case WM8997:
 				break;
 			default:
-				priv->out_up_delay += 10;
+				priv->out_up_delay += 10000;
 				break;
 			}
 			break;
@@ -999,7 +999,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w,
 			if (!priv->out_up_pending && priv->out_up_delay) {
 				dev_dbg(component->dev, "Power up delay: %d\n",
 					priv->out_up_delay);
-				msleep(priv->out_up_delay);
+				fsleep(priv->out_up_delay);
 				priv->out_up_delay = 0;
 			}
 			break;
@@ -1017,7 +1017,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w,
 		case ARIZONA_OUT3L_ENA_SHIFT:
 		case ARIZONA_OUT3R_ENA_SHIFT:
 			priv->out_down_pending++;
-			priv->out_down_delay++;
+			priv->out_down_delay += 1000;
 			break;
 		case ARIZONA_OUT4L_ENA_SHIFT:
 		case ARIZONA_OUT4R_ENA_SHIFT:
@@ -1028,10 +1028,10 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w,
 				break;
 			case WM8998:
 			case WM1814:
-				priv->out_down_delay += 5;
+				priv->out_down_delay += 5000;
 				break;
 			default:
-				priv->out_down_delay++;
+				priv->out_down_delay += 1000;
 				break;
 			}
 			break;
@@ -1053,7 +1053,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w,
 			if (!priv->out_down_pending && priv->out_down_delay) {
 				dev_dbg(component->dev, "Power down delay: %d\n",
 					priv->out_down_delay);
-				msleep(priv->out_down_delay);
+				fsleep(priv->out_down_delay);
 				priv->out_down_delay = 0;
 			}
 			break;
diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c
index b9f19fbd29114..30e680ee10699 100644
--- a/sound/soc/codecs/madera.c
+++ b/sound/soc/codecs/madera.c
@@ -2322,10 +2322,10 @@ int madera_out_ev(struct snd_soc_dapm_widget *w,
 	case CS42L92:
 	case CS47L92:
 	case CS47L93:
-		out_up_delay = 6;
+		out_up_delay = 6000;
 		break;
 	default:
-		out_up_delay = 17;
+		out_up_delay = 17000;
 		break;
 	}
 
@@ -2356,7 +2356,7 @@ int madera_out_ev(struct snd_soc_dapm_widget *w,
 		case MADERA_OUT3R_ENA_SHIFT:
 			priv->out_up_pending--;
 			if (!priv->out_up_pending) {
-				msleep(priv->out_up_delay);
+				fsleep(priv->out_up_delay);
 				priv->out_up_delay = 0;
 			}
 			break;
@@ -2375,7 +2375,7 @@ int madera_out_ev(struct snd_soc_dapm_widget *w,
 		case MADERA_OUT3L_ENA_SHIFT:
 		case MADERA_OUT3R_ENA_SHIFT:
 			priv->out_down_pending++;
-			priv->out_down_delay++;
+			priv->out_down_delay += 1000;
 			break;
 		default:
 			break;
@@ -2392,7 +2392,7 @@ int madera_out_ev(struct snd_soc_dapm_widget *w,
 		case MADERA_OUT3R_ENA_SHIFT:
 			priv->out_down_pending--;
 			if (!priv->out_down_pending) {
-				msleep(priv->out_down_delay);
+				fsleep(priv->out_down_delay);
 				priv->out_down_delay = 0;
 			}
 			break;
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index ac1f2c8503465..da5933fbdbf8a 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -302,7 +302,7 @@ static int wm5110_hp_pre_enable(struct snd_soc_dapm_widget *w)
 		} else {
 			wseq = wm5110_no_dre_left_enable;
 			nregs = ARRAY_SIZE(wm5110_no_dre_left_enable);
-			priv->out_up_delay += 10;
+			priv->out_up_delay += 10000;
 		}
 		break;
 	case ARIZONA_OUT1R_ENA_SHIFT:
@@ -312,7 +312,7 @@ static int wm5110_hp_pre_enable(struct snd_soc_dapm_widget *w)
 		} else {
 			wseq = wm5110_no_dre_right_enable;
 			nregs = ARRAY_SIZE(wm5110_no_dre_right_enable);
-			priv->out_up_delay += 10;
+			priv->out_up_delay += 10000;
 		}
 		break;
 	default:
@@ -338,7 +338,7 @@ static int wm5110_hp_pre_disable(struct snd_soc_dapm_widget *w)
 			snd_soc_component_update_bits(component,
 						      ARIZONA_SPARE_TRIGGERS,
 						      ARIZONA_WS_TRG1, 0);
-			priv->out_down_delay += 27;
+			priv->out_down_delay += 27000;
 		}
 		break;
 	case ARIZONA_OUT1R_ENA_SHIFT:
@@ -350,7 +350,7 @@ static int wm5110_hp_pre_disable(struct snd_soc_dapm_widget *w)
 			snd_soc_component_update_bits(component,
 						      ARIZONA_SPARE_TRIGGERS,
 						      ARIZONA_WS_TRG2, 0);
-			priv->out_down_delay += 27;
+			priv->out_down_delay += 27000;
 		}
 		break;
 	default:
-- 
2.39.5

[PATCH 6.6 072/166] ASoC: SOF: Intel: hda: add softdep pre to snd-hda-codec-hdmi module

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Terry Cheong <htcheong@chromium.org>

[ Upstream commit 33b7dc7843dbdc9b90c91d11ba30b107f9138ffd ]

In enviornment without KMOD requesting module may fail to load
snd-hda-codec-hdmi, resulting in HDMI audio not usable.
Add softdep to loading HDMI codec module first to ensure we can load it
correctly.

Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Johny Lin <lpg76627@gmail.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250206094723.18013-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/hda-codec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c
index 328d7c227b218..82a6707fb4b80 100644
--- a/sound/soc/sof/intel/hda-codec.c
+++ b/sound/soc/sof/intel/hda-codec.c
@@ -444,6 +444,7 @@ int hda_codec_i915_exit(struct snd_sof_dev *sdev)
 }
 EXPORT_SYMBOL_NS_GPL(hda_codec_i915_exit, SND_SOC_SOF_HDA_AUDIO_CODEC_I915);
 
+MODULE_SOFTDEP("pre: snd-hda-codec-hdmi");
 #endif
 
 MODULE_LICENSE("Dual BSD/GPL");
-- 
2.39.5

[PATCH 6.6 073/166] ASoC: SOF: amd: Handle IPC replies before FW_BOOT_COMPLETE

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

[ Upstream commit ac84ca815adb4171a4276b1d44096b75f6a150b7 ]

In some cases, e.g. during resuming from suspend, there is a possibility
that some IPC reply messages get received by the host while the DSP
firmware has not yet reached the complete boot state.

Detect when this happens and do not attempt to process the unexpected
replies from DSP.  Instead, provide proper debugging support.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-3-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/amd/acp-ipc.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/sound/soc/sof/amd/acp-ipc.c b/sound/soc/sof/amd/acp-ipc.c
index fcb54f545fea3..a4e9bc20adaff 100644
--- a/sound/soc/sof/amd/acp-ipc.c
+++ b/sound/soc/sof/amd/acp-ipc.c
@@ -167,6 +167,7 @@ irqreturn_t acp_sof_ipc_irq_thread(int irq, void *context)
 
 	if (sdev->first_boot && sdev->fw_state != SOF_FW_BOOT_COMPLETE) {
 		acp_mailbox_read(sdev, sdev->dsp_box.offset, &status, sizeof(status));
+
 		if ((status & SOF_IPC_PANIC_MAGIC_MASK) == SOF_IPC_PANIC_MAGIC) {
 			snd_sof_dsp_panic(sdev, sdev->dsp_box.offset + sizeof(status),
 					  true);
@@ -188,13 +189,21 @@ irqreturn_t acp_sof_ipc_irq_thread(int irq, void *context)
 
 	dsp_ack = snd_sof_dsp_read(sdev, ACP_DSP_BAR, ACP_SCRATCH_REG_0 + dsp_ack_write);
 	if (dsp_ack) {
-		spin_lock_irq(&sdev->ipc_lock);
-		/* handle immediate reply from DSP core */
-		acp_dsp_ipc_get_reply(sdev);
-		snd_sof_ipc_reply(sdev, 0);
-		/* set the done bit */
-		acp_dsp_ipc_dsp_done(sdev);
-		spin_unlock_irq(&sdev->ipc_lock);
+		if (likely(sdev->fw_state == SOF_FW_BOOT_COMPLETE)) {
+			spin_lock_irq(&sdev->ipc_lock);
+
+			/* handle immediate reply from DSP core */
+			acp_dsp_ipc_get_reply(sdev);
+			snd_sof_ipc_reply(sdev, 0);
+			/* set the done bit */
+			acp_dsp_ipc_dsp_done(sdev);
+
+			spin_unlock_irq(&sdev->ipc_lock);
+		} else {
+			dev_dbg_ratelimited(sdev->dev, "IPC reply before FW_BOOT_COMPLETE: %#x\n",
+					    dsp_ack);
+		}
+
 		ipc_irq = true;
 	}
 
-- 
2.39.5

[PATCH 6.6 074/166] net: wwan: mhi_wwan_mbim: Silence sequence number glitch errors

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Gerhold <stephan.gerhold@linaro.org>

[ Upstream commit 0d1fac6d26aff5df21bb4ec980d9b7a11c410b96 ]

When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is
constantly being filled with errors related to a "sequence number glitch",
e.g.:

	[ 1903.284538] sequence number glitch prev=16 curr=0
	[ 1913.812205] sequence number glitch prev=50 curr=0
	[ 1923.698219] sequence number glitch prev=142 curr=0
	[ 2029.248276] sequence number glitch prev=1555 curr=0
	[ 2046.333059] sequence number glitch prev=70 curr=0
	[ 2076.520067] sequence number glitch prev=272 curr=0
	[ 2158.704202] sequence number glitch prev=2655 curr=0
	[ 2218.530776] sequence number glitch prev=2349 curr=0
	[ 2225.579092] sequence number glitch prev=6 curr=0

Internet connectivity is working fine, so this error seems harmless. It
looks like modem does not preserve the sequence number when entering low
power state; the amount of errors depends on how actively the modem is
being used.

A similar issue has also been seen on USB-based MBIM modems [1]. However,
in cdc_ncm.c the "sequence number glitch" message is a debug message
instead of an error. Apply the same to the mhi_wwan_mbim.c driver to
silence these errors when using the modem.

[1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html

Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wwan/mhi_wwan_mbim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wwan/mhi_wwan_mbim.c b/drivers/net/wwan/mhi_wwan_mbim.c
index 3f72ae943b294..b1b2870a054ba 100644
--- a/drivers/net/wwan/mhi_wwan_mbim.c
+++ b/drivers/net/wwan/mhi_wwan_mbim.c
@@ -209,7 +209,7 @@ static int mbim_rx_verify_nth16(struct mhi_mbim_context *mbim, struct sk_buff *s
 	if (mbim->rx_seq + 1 != le16_to_cpu(nth16->wSequence) &&
 	    (mbim->rx_seq || le16_to_cpu(nth16->wSequence)) &&
 	    !(mbim->rx_seq == 0xffff && !le16_to_cpu(nth16->wSequence))) {
-		net_err_ratelimited("sequence number glitch prev=%d curr=%d\n",
+		net_dbg_ratelimited("sequence number glitch prev=%d curr=%d\n",
 				    mbim->rx_seq, le16_to_cpu(nth16->wSequence));
 	}
 	mbim->rx_seq = le16_to_cpu(nth16->wSequence);
-- 
2.39.5

[PATCH 6.6 075/166] io-wq: backoff when retrying worker creation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uday Shankar <ushankar@purestorage.com>

[ Upstream commit 13918315c5dc5a515926c8799042ea6885c2b734 ]

When io_uring submission goes async for the first time on a given task,
we'll try to create a worker thread to handle the submission. Creating
this worker thread can fail due to various transient conditions, such as
an outstanding signal in the forking thread, so we have retry logic with
a limit of 3 retries. However, this retry logic appears to be too
aggressive/fast - we've observed a thread blowing through the retry
limit while having the same outstanding signal the whole time. Here's an
excerpt of some tracing that demonstrates the issue:

First, signal 26 is generated for the process. It ends up getting routed
to thread 92942.

 0)   cbd-92284    /* signal_generate: sig=26 errno=0 code=-2 comm=psblkdASD pid=92934 grp=1 res=0 */

This causes create_io_thread in the signalled thread to fail with
ERESTARTNOINTR, and thus a retry is queued.

13) task_th-92942  /* io_uring_queue_async_work: ring 000000007325c9ae, request 0000000080c96d8e, user_data 0x0, opcode URING_CMD, flags 0x8240001, normal queue, work 000000006e96dd3f */
13) task_th-92942  io_wq_enqueue() {
13) task_th-92942    _raw_spin_lock();
13) task_th-92942    io_wq_activate_free_worker();
13) task_th-92942    _raw_spin_lock();
13) task_th-92942    create_io_worker() {
13) task_th-92942      __kmalloc_cache_noprof();
13) task_th-92942      __init_swait_queue_head();
13) task_th-92942      kprobe_ftrace_handler() {
13) task_th-92942        get_kprobe();
13) task_th-92942        aggr_pre_handler() {
13) task_th-92942          pre_handler_kretprobe();
13) task_th-92942          /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942        } /* aggr_pre_handler */
...
13) task_th-92942        } /* copy_process */
13) task_th-92942      } /* create_io_thread */
13) task_th-92942      kretprobe_rethook_handler() {
13) task_th-92942        /* create_exit: (create_io_worker+0x8a/0x1a0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942      } /* kretprobe_rethook_handler */
13) task_th-92942    queue_work_on() {
...

The CPU is then handed to a kworker to process the queued retry:

------------------------------------------
 13) task_th-92942  => kworker-54154
------------------------------------------
13) kworker-54154  io_workqueue_create() {
13) kworker-54154    io_queue_worker_create() {
13) kworker-54154      task_work_add() {
13) kworker-54154        wake_up_state() {
13) kworker-54154          try_to_wake_up() {
13) kworker-54154            _raw_spin_lock_irqsave();
13) kworker-54154            _raw_spin_unlock_irqrestore();
13) kworker-54154          } /* try_to_wake_up */
13) kworker-54154        } /* wake_up_state */
13) kworker-54154        kick_process();
13) kworker-54154      } /* task_work_add */
13) kworker-54154    } /* io_queue_worker_create */
13) kworker-54154  } /* io_workqueue_create */

And then we immediately switch back to the original task to try creating
a worker again. This fails, because the original task still hasn't
handled its signal.

-----------------------------------------
 13) kworker-54154  => task_th-92942
------------------------------------------
13) task_th-92942  create_worker_cont() {
13) task_th-92942    kprobe_ftrace_handler() {
13) task_th-92942      get_kprobe();
13) task_th-92942      aggr_pre_handler() {
13) task_th-92942        pre_handler_kretprobe();
13) task_th-92942        /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942      } /* aggr_pre_handler */
13) task_th-92942    } /* kprobe_ftrace_handler */
13) task_th-92942    create_io_thread() {
13) task_th-92942      copy_process() {
13) task_th-92942        task_active_pid_ns();
13) task_th-92942        _raw_spin_lock_irq();
13) task_th-92942        recalc_sigpending();
13) task_th-92942        _raw_spin_lock_irq();
13) task_th-92942      } /* copy_process */
13) task_th-92942    } /* create_io_thread */
13) task_th-92942    kretprobe_rethook_handler() {
13) task_th-92942      /* create_exit: (create_worker_cont+0x35/0x1b0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942    } /* kretprobe_rethook_handler */
13) task_th-92942    io_worker_release();
13) task_th-92942    queue_work_on() {
13) task_th-92942      clear_pending_if_disabled();
13) task_th-92942      __queue_work() {
13) task_th-92942      } /* __queue_work */
13) task_th-92942    } /* queue_work_on */
13) task_th-92942  } /* create_worker_cont */

The pattern repeats another couple times until we blow through the retry
counter, at which point we give up. All outstanding work is canceled,
and the io_uring command which triggered all this is failed with
ECANCELED:

13) task_th-92942  io_acct_cancel_pending_work() {
...
13) task_th-92942  /* io_uring_complete: ring 000000007325c9ae, req 0000000080c96d8e, user_data 0x0, result -125, cflags 0x0 extra1 0 extra2 0  */

Finally, the task gets around to processing its outstanding signal 26,
but it's too late.

13) task_th-92942  /* signal_deliver: sig=26 errno=0 code=-2 sa_handler=59566a0 sa_flags=14000000 */

Try to address this issue by adding a small scaling delay when retrying
worker creation. This should give the forking thread time to handle its
signal in the above case. This isn't a particularly satisfying solution,
as sufficiently paradoxical scheduling would still have us hitting the
same issue, and I'm open to suggestions for something better. But this
is likely to prevent this (already rare) issue from hitting in practice.

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250208-wq_retry-v2-1-4f6f5041d303@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 io_uring/io-wq.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/io_uring/io-wq.c b/io_uring/io-wq.c
index a1e31723c9ed6..93f3e4d1df853 100644
--- a/io_uring/io-wq.c
+++ b/io_uring/io-wq.c
@@ -65,7 +65,7 @@ struct io_worker {
 
 	union {
 		struct rcu_head rcu;
-		struct work_struct work;
+		struct delayed_work work;
 	};
 };
 
@@ -771,6 +771,18 @@ static inline bool io_should_retry_thread(struct io_worker *worker, long err)
 	}
 }
 
+static void queue_create_worker_retry(struct io_worker *worker)
+{
+	/*
+	 * We only bother retrying because there's a chance that the
+	 * failure to create a worker is due to some temporary condition
+	 * in the forking task (e.g. outstanding signal); give the task
+	 * some time to clear that condition.
+	 */
+	schedule_delayed_work(&worker->work,
+			      msecs_to_jiffies(worker->init_retries * 5));
+}
+
 static void create_worker_cont(struct callback_head *cb)
 {
 	struct io_worker *worker;
@@ -810,12 +822,13 @@ static void create_worker_cont(struct callback_head *cb)
 
 	/* re-create attempts grab a new worker ref, drop the existing one */
 	io_worker_release(worker);
-	schedule_work(&worker->work);
+	queue_create_worker_retry(worker);
 }
 
 static void io_workqueue_create(struct work_struct *work)
 {
-	struct io_worker *worker = container_of(work, struct io_worker, work);
+	struct io_worker *worker = container_of(work, struct io_worker,
+						work.work);
 	struct io_wq_acct *acct = io_wq_get_acct(worker);
 
 	if (!io_queue_worker_create(worker, acct, create_worker_cont))
@@ -856,8 +869,8 @@ static bool create_io_worker(struct io_wq *wq, int index)
 		kfree(worker);
 		goto fail;
 	} else {
-		INIT_WORK(&worker->work, io_workqueue_create);
-		schedule_work(&worker->work);
+		INIT_DELAYED_WORK(&worker->work, io_workqueue_create);
+		queue_create_worker_retry(worker);
 	}
 
 	return true;
-- 
2.39.5

[PATCH 6.6 076/166] nvme-pci: quirk Acer FA100 for non-uniqueue identifiers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christopher Lentocha <christopherericlentocha@gmail.com>

[ Upstream commit fcd875445866a5219cf2be3101e276b21fc843f3 ]

In order for two Acer FA100 SSDs to work in one PC (in the case of
myself, a Lenovo Legion T5 28IMB05), and not show one drive and not
the other, and sometimes mix up what drive shows up (randomly), these
two lines of code need to be added, and then both of the SSDs will
show up and not conflict when booting off of one of them. If you boot
up your computer with both SSDs installed without this patch, you may
also randomly get into a kernel panic (if the initrd is not set up) or
stuck in the initrd "/init" process, it is set up, however, if you do
apply this patch, there should not be problems with booting or seeing
both contents of the drive. Tested with the btrfs filesystem with a
RAID configuration of having the root drive '/' combined to make two
256GB Acer FA100 SSDs become 512GB in total storage.

Kernel Logs with patch applied (`dmesg -t | grep -i nvm`):

```
...
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:04:00.0
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:05:00.0
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme1: allocated 64 MiB host memory buffer.
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: Ignoring bogus Namespace Identifiers
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme0: Ignoring bogus Namespace Identifiers
nvme0n1: p1 p2
...
```

Kernel Logs with patch not applied (`dmesg -t | grep -i nvm`):

```
...
nvme 0000:04:00.0: platform quirk: setting simple suspend
nvme nvme0: pci function 0000:04:00.0
nvme 0000:05:00.0: platform quirk: setting simple suspend
nvme nvme1: pci function 0000:05:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme1: allocated 64 MiB host memory buffer.
nvme nvme0: 8/0/0 default/read/poll queues
nvme nvme1: 8/0/0 default/read/poll queues
nvme nvme1: globally duplicate IDs for nsid 1
nvme nvme1: VID:DID 1dbe:5216 model:Acer SSD FA100 256GB firmware:1.Z.J.2X
nvme0n1: p1 p2
...
```

Signed-off-by: Christopher Lentocha <christopherericlentocha@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index b1310e69d07da..a36ec6df6624b 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3509,6 +3509,8 @@ static const struct pci_device_id nvme_id_table[] = {
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x1cc1, 0x5350),   /* ADATA XPG GAMMIX S50 */
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
+	{ PCI_DEVICE(0x1dbe, 0x5216),   /* Acer/INNOGRIT FA100/5216 NVMe SSD */
+		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x1dbe, 0x5236),   /* ADATA XPG GAMMIX S70 */
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
 	{ PCI_DEVICE(0x1e49, 0x0021),   /* ZHITAI TiPro5000 NVMe SSD */
-- 
2.39.5

[PATCH 6.6 077/166] nvme-tcp: add basic support for the C2HTermReq PDU

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 84e009042d0f3dfe91bec60bcd208ee3f866cbcd ]

Previously, the NVMe/TCP host driver did not handle the C2HTermReq PDU,
instead printing "unsupported pdu type (3)" when received. This patch adds
support for processing the C2HTermReq PDU, allowing the driver
to print the Fatal Error Status field.

Example of output:
nvme nvme4: Received C2HTermReq (FES = Invalid PDU Header Field)

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c  | 43 ++++++++++++++++++++++++++++++++++++++++
 include/linux/nvme-tcp.h |  2 ++
 2 files changed, 45 insertions(+)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index be04c5f3856d2..83366a8f0f916 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -707,6 +707,40 @@ static int nvme_tcp_handle_r2t(struct nvme_tcp_queue *queue,
 	return 0;
 }
 
+static void nvme_tcp_handle_c2h_term(struct nvme_tcp_queue *queue,
+		struct nvme_tcp_term_pdu *pdu)
+{
+	u16 fes;
+	const char *msg;
+	u32 plen = le32_to_cpu(pdu->hdr.plen);
+
+	static const char * const msg_table[] = {
+		[NVME_TCP_FES_INVALID_PDU_HDR] = "Invalid PDU Header Field",
+		[NVME_TCP_FES_PDU_SEQ_ERR] = "PDU Sequence Error",
+		[NVME_TCP_FES_HDR_DIGEST_ERR] = "Header Digest Error",
+		[NVME_TCP_FES_DATA_OUT_OF_RANGE] = "Data Transfer Out Of Range",
+		[NVME_TCP_FES_R2T_LIMIT_EXCEEDED] = "R2T Limit Exceeded",
+		[NVME_TCP_FES_UNSUPPORTED_PARAM] = "Unsupported Parameter",
+	};
+
+	if (plen < NVME_TCP_MIN_C2HTERM_PLEN ||
+	    plen > NVME_TCP_MAX_C2HTERM_PLEN) {
+		dev_err(queue->ctrl->ctrl.device,
+			"Received a malformed C2HTermReq PDU (plen = %u)\n",
+			plen);
+		return;
+	}
+
+	fes = le16_to_cpu(pdu->fes);
+	if (fes && fes < ARRAY_SIZE(msg_table))
+		msg = msg_table[fes];
+	else
+		msg = "Unknown";
+
+	dev_err(queue->ctrl->ctrl.device,
+		"Received C2HTermReq (FES = %s)\n", msg);
+}
+
 static int nvme_tcp_recv_pdu(struct nvme_tcp_queue *queue, struct sk_buff *skb,
 		unsigned int *offset, size_t *len)
 {
@@ -728,6 +762,15 @@ static int nvme_tcp_recv_pdu(struct nvme_tcp_queue *queue, struct sk_buff *skb,
 		return 0;
 
 	hdr = queue->pdu;
+	if (unlikely(hdr->type == nvme_tcp_c2h_term)) {
+		/*
+		 * C2HTermReq never includes Header or Data digests.
+		 * Skip the checks.
+		 */
+		nvme_tcp_handle_c2h_term(queue, (void *)queue->pdu);
+		return -EINVAL;
+	}
+
 	if (queue->hdr_digest) {
 		ret = nvme_tcp_verify_hdgst(queue, queue->pdu, hdr->hlen);
 		if (unlikely(ret))
diff --git a/include/linux/nvme-tcp.h b/include/linux/nvme-tcp.h
index e07e8978d691b..e435250fcb4d0 100644
--- a/include/linux/nvme-tcp.h
+++ b/include/linux/nvme-tcp.h
@@ -13,6 +13,8 @@
 #define NVME_TCP_ADMIN_CCSZ	SZ_8K
 #define NVME_TCP_DIGEST_LENGTH	4
 #define NVME_TCP_MIN_MAXH2CDATA 4096
+#define NVME_TCP_MIN_C2HTERM_PLEN	24
+#define NVME_TCP_MAX_C2HTERM_PLEN	152
 
 enum nvme_tcp_pfv {
 	NVME_TCP_PFV_1_0 = 0x0,
-- 
2.39.5

[PATCH 6.6 078/166] nvmet-rdma: recheck queue state is LIVE in state lock in recv done

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ruozhu Li <david.li@jaguarmicro.com>

[ Upstream commit 3988ac1c67e6e84d2feb987d7b36d5791174b3da ]

The queue state checking in nvmet_rdma_recv_done is not in queue state
lock.Queue state can transfer to LIVE in cm establish handler between
state checking and state lock here, cause a silent drop of nvme connect
cmd.
Recheck queue state whether in LIVE state in state lock to prevent this
issue.

Signed-off-by: Ruozhu Li <david.li@jaguarmicro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/rdma.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index a6d55ebb82382..298c46834a539 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -997,6 +997,27 @@ static void nvmet_rdma_handle_command(struct nvmet_rdma_queue *queue,
 	nvmet_req_complete(&cmd->req, status);
 }
 
+static bool nvmet_rdma_recv_not_live(struct nvmet_rdma_queue *queue,
+		struct nvmet_rdma_rsp *rsp)
+{
+	unsigned long flags;
+	bool ret = true;
+
+	spin_lock_irqsave(&queue->state_lock, flags);
+	/*
+	 * recheck queue state is not live to prevent a race condition
+	 * with RDMA_CM_EVENT_ESTABLISHED handler.
+	 */
+	if (queue->state == NVMET_RDMA_Q_LIVE)
+		ret = false;
+	else if (queue->state == NVMET_RDMA_Q_CONNECTING)
+		list_add_tail(&rsp->wait_list, &queue->rsp_wait_list);
+	else
+		nvmet_rdma_put_rsp(rsp);
+	spin_unlock_irqrestore(&queue->state_lock, flags);
+	return ret;
+}
+
 static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc)
 {
 	struct nvmet_rdma_cmd *cmd =
@@ -1038,17 +1059,9 @@ static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc)
 	rsp->req.port = queue->port;
 	rsp->n_rdma = 0;
 
-	if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&queue->state_lock, flags);
-		if (queue->state == NVMET_RDMA_Q_CONNECTING)
-			list_add_tail(&rsp->wait_list, &queue->rsp_wait_list);
-		else
-			nvmet_rdma_put_rsp(rsp);
-		spin_unlock_irqrestore(&queue->state_lock, flags);
+	if (unlikely(queue->state != NVMET_RDMA_Q_LIVE) &&
+	    nvmet_rdma_recv_not_live(queue, rsp))
 		return;
-	}
 
 	nvmet_rdma_handle_command(queue, rsp);
 }
-- 
2.39.5

[PATCH 6.6 079/166] apple-nvme: Release power domains when probe fails

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hector Martin <marcan@marcan.st>

[ Upstream commit eefa72a15ea03fd009333aaa9f0e360b2578e434 ]

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/apple.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/apple.c b/drivers/nvme/host/apple.c
index 396eb94376597..9b1019ee74789 100644
--- a/drivers/nvme/host/apple.c
+++ b/drivers/nvme/host/apple.c
@@ -1517,6 +1517,7 @@ static struct apple_nvme *apple_nvme_alloc(struct platform_device *pdev)
 
 	return anv;
 put_dev:
+	apple_nvme_detach_genpd(anv);
 	put_device(anv->dev);
 	return ERR_PTR(ret);
 }
@@ -1545,6 +1546,7 @@ static int apple_nvme_probe(struct platform_device *pdev)
 out_uninit_ctrl:
 	nvme_uninit_ctrl(&anv->ctrl);
 	nvme_put_ctrl(&anv->ctrl);
+	apple_nvme_detach_genpd(anv);
 	return ret;
 }
 
-- 
2.39.5

[PATCH 6.6 080/166] cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pali Rohár <pali@kernel.org>

[ Upstream commit b587fd128660d48cd2122f870f720ff8e2b4abb3 ]

If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.

Name surrogate reparse point represents another named entity in the system.

>From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/inode.c    | 13 +++++++++++++
 fs/smb/common/smbfsctl.h |  3 +++
 2 files changed, 16 insertions(+)

diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c
index dbb407d5e6dab..b9cf05e0940d0 100644
--- a/fs/smb/client/inode.c
+++ b/fs/smb/client/inode.c
@@ -1132,6 +1132,19 @@ static int reparse_info_to_fattr(struct cifs_open_info_data *data,
 			rc = server->ops->parse_reparse_point(cifs_sb,
 							      full_path,
 							      iov, data);
+			/*
+			 * If the reparse point was not handled but it is the
+			 * name surrogate which points to directory, then treat
+			 * is as a new mount point. Name surrogate reparse point
+			 * represents another named entity in the system.
+			 */
+			if (rc == -EOPNOTSUPP &&
+			    IS_REPARSE_TAG_NAME_SURROGATE(data->reparse.tag) &&
+			    (le32_to_cpu(data->fi.Attributes) & ATTR_DIRECTORY)) {
+				rc = 0;
+				cifs_create_junction_fattr(fattr, sb);
+				goto out;
+			}
 		}
 		break;
 	}
diff --git a/fs/smb/common/smbfsctl.h b/fs/smb/common/smbfsctl.h
index a94d658b88e86..6eff3a8bde096 100644
--- a/fs/smb/common/smbfsctl.h
+++ b/fs/smb/common/smbfsctl.h
@@ -158,6 +158,9 @@
 #define IO_REPARSE_TAG_LX_CHR	     0x80000025
 #define IO_REPARSE_TAG_LX_BLK	     0x80000026
 
+/* If Name Surrogate Bit is set, the file or directory represents another named entity in the system. */
+#define IS_REPARSE_TAG_NAME_SURROGATE(tag) (!!((tag) & 0x20000000))
+
 /* fsctl flags */
 /* If Flags is set to this value, the request is an FSCTL not ioctl request */
 #define SMB2_0_IOCTL_IS_FSCTL		0x00000001
-- 
2.39.5

[PATCH 6.6 081/166] sctp: Fix undefined behavior in left shift operation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yu-Chun Lin <eleanor15x@gmail.com>

[ Upstream commit 606572eb22c1786a3957d24307f5760bb058ca19 ]

According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."

Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.

Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.

Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/stream.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/stream.c b/net/sctp/stream.c
index c241cc552e8d5..bfcff6d6a4386 100644
--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -735,7 +735,7 @@ struct sctp_chunk *sctp_process_strreset_tsnreq(
 	 *     value SHOULD be the smallest TSN not acknowledged by the
 	 *     receiver of the request plus 2^31.
 	 */
-	init_tsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map) + (1 << 31);
+	init_tsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map) + (1U << 31);
 	sctp_tsnmap_init(&asoc->peer.tsn_map, SCTP_TSN_MAP_INITIAL,
 			 init_tsn, GFP_ATOMIC);
 
-- 
2.39.5

[PATCH 6.6 082/166] nvme: only allow entering LIVE from CONNECTING state

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Wagner <wagi@kernel.org>

[ Upstream commit d2fe192348f93fe3a0cb1e33e4aba58e646397f4 ]

The fabric transports and also the PCI transport are not entering the
LIVE state from NEW or RESETTING. This makes the state machine more
restrictive and allows to catch not supported state transitions, e.g.
directly switching from RESETTING to LIVE.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 8a200931bc297..f00665ad0c11a 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -503,8 +503,6 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
 	switch (new_state) {
 	case NVME_CTRL_LIVE:
 		switch (old_state) {
-		case NVME_CTRL_NEW:
-		case NVME_CTRL_RESETTING:
 		case NVME_CTRL_CONNECTING:
 			changed = true;
 			fallthrough;
-- 
2.39.5

[PATCH 6.6 083/166] ASoC: tas2770: Fix volume scale

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 579cd64b9df8a60284ec3422be919c362de40e41 ]

The scale starts at -100dB, not -128dB.

Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2770-v1-1-cf50ff1d59a3@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tas2770.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 99bf402eb5667..5c6b825c757b3 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -508,7 +508,7 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
 }
 
 static DECLARE_TLV_DB_SCALE(tas2770_digital_tlv, 1100, 50, 0);
-static DECLARE_TLV_DB_SCALE(tas2770_playback_volume, -12750, 50, 0);
+static DECLARE_TLV_DB_SCALE(tas2770_playback_volume, -10050, 50, 0);
 
 static const struct snd_kcontrol_new tas2770_snd_controls[] = {
 	SOC_SINGLE_TLV("Speaker Playback Volume", TAS2770_PLAY_CFG_REG2,
-- 
2.39.5

[PATCH 6.6 084/166] ASoC: tas2764: Fix power control mask

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hector Martin <marcan@marcan.st>

[ Upstream commit a3f172359e22b2c11b750d23560481a55bf86af1 ]

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-1-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tas2764.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tas2764.h b/sound/soc/codecs/tas2764.h
index 168af772a898f..d13ecae9c9c2f 100644
--- a/sound/soc/codecs/tas2764.h
+++ b/sound/soc/codecs/tas2764.h
@@ -25,7 +25,7 @@
 
 /* Power Control */
 #define TAS2764_PWR_CTRL		TAS2764_REG(0X0, 0x02)
-#define TAS2764_PWR_CTRL_MASK		GENMASK(1, 0)
+#define TAS2764_PWR_CTRL_MASK		GENMASK(2, 0)
 #define TAS2764_PWR_CTRL_ACTIVE		0x0
 #define TAS2764_PWR_CTRL_MUTE		BIT(0)
 #define TAS2764_PWR_CTRL_SHUTDOWN	BIT(1)
-- 
2.39.5

[PATCH 6.6 085/166] ASoC: tas2764: Set the SDOUT polarity correctly

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hector Martin <marcan@marcan.st>

[ Upstream commit f5468beeab1b1adfc63c2717b1f29ef3f49a5fab ]

TX launch polarity needs to be the opposite of RX capture polarity, to
generate the right bit slot alignment.

Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20250218-apple-codec-changes-v2-28-932760fd7e07@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tas2764.c | 10 +++++++++-
 sound/soc/codecs/tas2764.h |  6 ++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index a9838e0738cc1..e87a07eee9737 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -367,7 +367,7 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_component *component = dai->component;
 	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
-	u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0;
+	u8 tdm_rx_start_slot = 0, asi_cfg_0 = 0, asi_cfg_1 = 0, asi_cfg_4 = 0;
 	int ret;
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
@@ -376,12 +376,14 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		fallthrough;
 	case SND_SOC_DAIFMT_NB_NF:
 		asi_cfg_1 = TAS2764_TDM_CFG1_RX_RISING;
+		asi_cfg_4 = TAS2764_TDM_CFG4_TX_FALLING;
 		break;
 	case SND_SOC_DAIFMT_IB_IF:
 		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
 		fallthrough;
 	case SND_SOC_DAIFMT_IB_NF:
 		asi_cfg_1 = TAS2764_TDM_CFG1_RX_FALLING;
+		asi_cfg_4 = TAS2764_TDM_CFG4_TX_RISING;
 		break;
 	}
 
@@ -391,6 +393,12 @@ static int tas2764_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	if (ret < 0)
 		return ret;
 
+	ret = snd_soc_component_update_bits(component, TAS2764_TDM_CFG4,
+					    TAS2764_TDM_CFG4_TX_MASK,
+					    asi_cfg_4);
+	if (ret < 0)
+		return ret;
+
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		asi_cfg_0 ^= TAS2764_TDM_CFG0_FRAME_START;
diff --git a/sound/soc/codecs/tas2764.h b/sound/soc/codecs/tas2764.h
index d13ecae9c9c2f..9490f2686e389 100644
--- a/sound/soc/codecs/tas2764.h
+++ b/sound/soc/codecs/tas2764.h
@@ -79,6 +79,12 @@
 #define TAS2764_TDM_CFG3_RXS_SHIFT	0x4
 #define TAS2764_TDM_CFG3_MASK		GENMASK(3, 0)
 
+/* TDM Configuration Reg4 */
+#define TAS2764_TDM_CFG4		TAS2764_REG(0X0, 0x0d)
+#define TAS2764_TDM_CFG4_TX_MASK	BIT(0)
+#define TAS2764_TDM_CFG4_TX_RISING	0x0
+#define TAS2764_TDM_CFG4_TX_FALLING	BIT(0)
+
 /* TDM Configuration Reg5 */
 #define TAS2764_TDM_CFG5		TAS2764_REG(0X0, 0x0e)
 #define TAS2764_TDM_CFG5_VSNS_MASK	BIT(6)
-- 
2.39.5

[PATCH 6.6 086/166] fuse: dont truncate cached, mutated symlink

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ]

Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).

It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.

This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes

This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.

The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size.  This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.

The solution is to just remove this truncation.  This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely.  If that happens we'd need to make
this behavior conditional.

Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fuse/dir.c      |  2 +-
 fs/namei.c         | 24 +++++++++++++++++++-----
 include/linux/fs.h |  2 ++
 3 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 95f9913a35373..89bffaed421fa 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -1608,7 +1608,7 @@ static const char *fuse_get_link(struct dentry *dentry, struct inode *inode,
 		goto out_err;
 
 	if (fc->cache_symlinks)
-		return page_get_link(dentry, inode, callback);
+		return page_get_link_raw(dentry, inode, callback);
 
 	err = -ECHILD;
 	if (!dentry)
diff --git a/fs/namei.c b/fs/namei.c
index beffbb02a24e6..155e4d09a5fb2 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -5154,10 +5154,9 @@ const char *vfs_get_link(struct dentry *dentry, struct delayed_call *done)
 EXPORT_SYMBOL(vfs_get_link);
 
 /* get the link contents into pagecache */
-const char *page_get_link(struct dentry *dentry, struct inode *inode,
-			  struct delayed_call *callback)
+static char *__page_get_link(struct dentry *dentry, struct inode *inode,
+			     struct delayed_call *callback)
 {
-	char *kaddr;
 	struct page *page;
 	struct address_space *mapping = inode->i_mapping;
 
@@ -5176,8 +5175,23 @@ const char *page_get_link(struct dentry *dentry, struct inode *inode,
 	}
 	set_delayed_call(callback, page_put_link, page);
 	BUG_ON(mapping_gfp_mask(mapping) & __GFP_HIGHMEM);
-	kaddr = page_address(page);
-	nd_terminate_link(kaddr, inode->i_size, PAGE_SIZE - 1);
+	return page_address(page);
+}
+
+const char *page_get_link_raw(struct dentry *dentry, struct inode *inode,
+			      struct delayed_call *callback)
+{
+	return __page_get_link(dentry, inode, callback);
+}
+EXPORT_SYMBOL_GPL(page_get_link_raw);
+
+const char *page_get_link(struct dentry *dentry, struct inode *inode,
+					struct delayed_call *callback)
+{
+	char *kaddr = __page_get_link(dentry, inode, callback);
+
+	if (!IS_ERR(kaddr))
+		nd_terminate_link(kaddr, inode->i_size, PAGE_SIZE - 1);
 	return kaddr;
 }
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e47596d354ff7..81edfa1e66b60 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3085,6 +3085,8 @@ extern const struct file_operations generic_ro_fops;
 
 extern int readlink_copy(char __user *, int, const char *);
 extern int page_readlink(struct dentry *, char __user *, int);
+extern const char *page_get_link_raw(struct dentry *, struct inode *,
+				     struct delayed_call *);
 extern const char *page_get_link(struct dentry *, struct inode *,
 				 struct delayed_call *);
 extern void page_put_link(void *);
-- 
2.39.5

[PATCH 6.6 087/166] drm/vkms: Round fixp2int conversion in lerp_u16

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Harry Wentland <harry.wentland@amd.com>

[ Upstream commit 8ec43c58d3be615a71548bc09148212013fb7e5f ]

fixp2int always rounds down, fixp2int_ceil rounds up. We need
the new fixp2int_round.

Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220043410.416867-3-alex.hung@amd.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vkms/vkms_composer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c
index e7441b227b3ce..3d6785d081f2c 100644
--- a/drivers/gpu/drm/vkms/vkms_composer.c
+++ b/drivers/gpu/drm/vkms/vkms_composer.c
@@ -98,7 +98,7 @@ static u16 lerp_u16(u16 a, u16 b, s64 t)
 
 	s64 delta = drm_fixp_mul(b_fp - a_fp,  t);
 
-	return drm_fixp2int(a_fp + delta);
+	return drm_fixp2int_round(a_fp + delta);
 }
 
 static s64 get_lut_index(const struct vkms_color_lut *lut, u16 channel_value)
-- 
2.39.5

[PATCH 6.6 088/166] perf/x86/intel: Use better start period for frequency mode

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit a26b24b2e21f6222635a95426b9ef9eec63d69b1 ]

Freqency mode is the current default mode of Linux perf. A period of 1 is
used as a starting period. The period is auto-adjusted on each tick or an
overflow, to meet the frequency target.

The start period of 1 is too low and may trigger some issues:

- Many HWs do not support period 1 well.
  https://lore.kernel.org/lkml/875xs2oh69.ffs@tglx/

- For an event that occurs frequently, period 1 is too far away from the
  real period. Lots of samples are generated at the beginning.
  The distribution of samples may not be even.

- A low starting period for frequently occurring events also challenges
  virtualization, which has a longer path to handle a PMI.

The limit_period value only checks the minimum acceptable value for HW.
It cannot be used to set the start period, because some events may
need a very low period. The limit_period cannot be set too high. It
doesn't help with the events that occur frequently.

It's hard to find a universal starting period for all events. The idea
implemented by this patch is to only give an estimate for the popular
HW and HW cache events. For the rest of the events, start from the lowest
possible recommended value.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250117151913.3043942-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 85 ++++++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 61ac094e26bd7..b163817ad6daf 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3881,6 +3881,85 @@ static inline bool intel_pmu_has_cap(struct perf_event *event, int idx)
 	return test_bit(idx, (unsigned long *)&intel_cap->capabilities);
 }
 
+static u64 intel_pmu_freq_start_period(struct perf_event *event)
+{
+	int type = event->attr.type;
+	u64 config, factor;
+	s64 start;
+
+	/*
+	 * The 127 is the lowest possible recommended SAV (sample after value)
+	 * for a 4000 freq (default freq), according to the event list JSON file.
+	 * Also, assume the workload is idle 50% time.
+	 */
+	factor = 64 * 4000;
+	if (type != PERF_TYPE_HARDWARE && type != PERF_TYPE_HW_CACHE)
+		goto end;
+
+	/*
+	 * The estimation of the start period in the freq mode is
+	 * based on the below assumption.
+	 *
+	 * For a cycles or an instructions event, 1GHZ of the
+	 * underlying platform, 1 IPC. The workload is idle 50% time.
+	 * The start period = 1,000,000,000 * 1 / freq / 2.
+	 *		    = 500,000,000 / freq
+	 *
+	 * Usually, the branch-related events occur less than the
+	 * instructions event. According to the Intel event list JSON
+	 * file, the SAV (sample after value) of a branch-related event
+	 * is usually 1/4 of an instruction event.
+	 * The start period of branch-related events = 125,000,000 / freq.
+	 *
+	 * The cache-related events occurs even less. The SAV is usually
+	 * 1/20 of an instruction event.
+	 * The start period of cache-related events = 25,000,000 / freq.
+	 */
+	config = event->attr.config & PERF_HW_EVENT_MASK;
+	if (type == PERF_TYPE_HARDWARE) {
+		switch (config) {
+		case PERF_COUNT_HW_CPU_CYCLES:
+		case PERF_COUNT_HW_INSTRUCTIONS:
+		case PERF_COUNT_HW_BUS_CYCLES:
+		case PERF_COUNT_HW_STALLED_CYCLES_FRONTEND:
+		case PERF_COUNT_HW_STALLED_CYCLES_BACKEND:
+		case PERF_COUNT_HW_REF_CPU_CYCLES:
+			factor = 500000000;
+			break;
+		case PERF_COUNT_HW_BRANCH_INSTRUCTIONS:
+		case PERF_COUNT_HW_BRANCH_MISSES:
+			factor = 125000000;
+			break;
+		case PERF_COUNT_HW_CACHE_REFERENCES:
+		case PERF_COUNT_HW_CACHE_MISSES:
+			factor = 25000000;
+			break;
+		default:
+			goto end;
+		}
+	}
+
+	if (type == PERF_TYPE_HW_CACHE)
+		factor = 25000000;
+end:
+	/*
+	 * Usually, a prime or a number with less factors (close to prime)
+	 * is chosen as an SAV, which makes it less likely that the sampling
+	 * period synchronizes with some periodic event in the workload.
+	 * Minus 1 to make it at least avoiding values near power of twos
+	 * for the default freq.
+	 */
+	start = DIV_ROUND_UP_ULL(factor, event->attr.sample_freq) - 1;
+
+	if (start > x86_pmu.max_period)
+		start = x86_pmu.max_period;
+
+	if (x86_pmu.limit_period)
+		x86_pmu.limit_period(event, &start);
+
+	return start;
+}
+
 static int intel_pmu_hw_config(struct perf_event *event)
 {
 	int ret = x86_pmu_hw_config(event);
@@ -3892,6 +3971,12 @@ static int intel_pmu_hw_config(struct perf_event *event)
 	if (ret)
 		return ret;
 
+	if (event->attr.freq && event->attr.sample_freq) {
+		event->hw.sample_period = intel_pmu_freq_start_period(event);
+		event->hw.last_period = event->hw.sample_period;
+		local64_set(&event->hw.period_left, event->hw.sample_period);
+	}
+
 	if (event->attr.precise_ip) {
 		if ((event->attr.config & INTEL_ARCH_EVENT_MASK) == INTEL_FIXED_VLBR_EVENT)
 			return -EINVAL;
-- 
2.39.5

[PATCH 6.6 089/166] x86/irq: Define trace events conditionally

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9de7695925d5d2d2085681ba935857246eb2817d ]

When both of X86_LOCAL_APIC and X86_THERMAL_VECTOR are disabled,
the irq tracing produces a W=1 build warning for the tracing
definitions:

  In file included from include/trace/trace_events.h:27,
                 from include/trace/define_trace.h:113,
                 from arch/x86/include/asm/trace/irq_vectors.h:383,
                 from arch/x86/kernel/irq.c:29:
  include/trace/stages/init.h:2:23: error: 'str__irq_vectors__trace_system_name' defined but not used [-Werror=unused-const-variable=]

Make the tracepoints conditional on the same symbosl that guard
their usage.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250225213236.3141752-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/irq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 11761c1245453..6573678c4bf4b 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -23,8 +23,10 @@
 #include <asm/traps.h>
 #include <asm/thermal.h>
 
+#if defined(CONFIG_X86_LOCAL_APIC) || defined(CONFIG_X86_THERMAL_VECTOR)
 #define CREATE_TRACE_POINTS
 #include <asm/trace/irq_vectors.h>
+#endif
 
 DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 EXPORT_PER_CPU_SYMBOL(irq_stat);
-- 
2.39.5

[PATCH 6.6 090/166] mptcp: safety check before fallback

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthieu Baerts (NGI0) <matttbe@kernel.org>

[ Upstream commit db75a16813aabae3b78c06b1b99f5e314c1f55d3 ]

Recently, some fallback have been initiated, while the connection was
not supposed to fallback.

Add a safety check with a warning to detect when an wrong attempt to
fallback is being done. This should help detecting any future issues
quicker.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 0bb0386aa0897..d67add91c9b90 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -1103,6 +1103,8 @@ static inline void __mptcp_do_fallback(struct mptcp_sock *msk)
 		pr_debug("TCP fallback already done (msk=%p)\n", msk);
 		return;
 	}
+	if (WARN_ON_ONCE(!READ_ONCE(msk->allow_infinite_fallback)))
+		return;
 	set_bit(MPTCP_FALLBACK_DONE, &msk->flags);
 }
 
-- 
2.39.5

[PATCH 6.6 091/166] drm/nouveau: Do not override forced connector status

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 01f1d77a2630e774ce33233c4e6723bca3ae9daa ]

Keep user-forced connector status even if it cannot be programmed. Same
behavior as for the rest of the drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114100214.195386-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 22a125243d81f..c1985448d9b38 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -758,7 +758,6 @@ nouveau_connector_force(struct drm_connector *connector)
 	if (!nv_encoder) {
 		NV_ERROR(drm, "can't find encoder to force %s on!\n",
 			 connector->name);
-		connector->status = connector_status_disconnected;
 		return;
 	}
 
-- 
2.39.5

[PATCH 6.6 092/166] net: Handle napi_schedule() calls from non-interrupt

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Frederic Weisbecker <frederic@kernel.org>

[ Upstream commit 77e45145e3039a0fb212556ab3f8c87f54771757 ]

napi_schedule() is expected to be called either:

* From an interrupt, where raised softirqs are handled on IRQ exit

* From a softirq disabled section, where raised softirqs are handled on
  the next call to local_bh_enable().

* From a softirq handler, where raised softirqs are handled on the next
  round in do_softirq(), or further deferred to a dedicated kthread.

Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.

Such "misuses" have been detected on several places thanks to messages
of the kind:

	"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"

For example:

       __raise_softirq_irqoff
        __napi_schedule
        rtl8152_runtime_resume.isra.0
        rtl8152_resume
        usb_resume_interface.isra.0
        usb_resume_both
        __rpm_callback
        rpm_callback
        rpm_resume
        __pm_runtime_resume
        usb_autoresume_device
        usb_remote_wakeup
        hub_event
        process_one_work
        worker_thread
        kthread
        ret_from_fork
        ret_from_fork_asm

And also:

* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit

There is a long history of issues of this kind:

	019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
	330068589389 ("idpf: disable local BH when scheduling napi for marker packets")
	e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error")
	e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule")
	c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
	970be1dff26d ("mt76: disable BH around napi_schedule() calls")
	019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
	30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new  function to be called from threaded interrupt")
	e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()")
	83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule")
	bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule")
	8cf699ec849f ("mlx4: do not call napi_schedule() without care")
	ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")

This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.

Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 8c30cdcf05d4b..c31a7f7bedf3d 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4532,7 +4532,7 @@ static inline void ____napi_schedule(struct softnet_data *sd,
 	 * we have to raise NET_RX_SOFTIRQ.
 	 */
 	if (!sd->in_net_rx_action)
-		__raise_softirq_irqoff(NET_RX_SOFTIRQ);
+		raise_softirq_irqoff(NET_RX_SOFTIRQ);
 }
 
 #ifdef CONFIG_RPS
-- 
2.39.5

[PATCH 6.6 093/166] block: fix kmem_cache of name bio-108 already exists

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit b654f7a51ffb386131de42aa98ed831f8c126546 ]

Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.

Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo

Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/bio.c b/block/bio.c
index 62419aa09d731..4a8e761699571 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -78,7 +78,7 @@ struct bio_slab {
 	struct kmem_cache *slab;
 	unsigned int slab_ref;
 	unsigned int slab_size;
-	char name[8];
+	char name[12];
 };
 static DEFINE_MUTEX(bio_slab_lock);
 static DEFINE_XARRAY(bio_slabs);
-- 
2.39.5

[PATCH 6.6 094/166] mm: add nommu variant of vm_insert_pages()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5 upstream.

An identical one exists for vm_insert_page(), add one for
vm_insert_pages() to avoid needing to check for CONFIG_MMU in code using
it.

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/nommu.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -357,6 +357,13 @@ int vm_insert_page(struct vm_area_struct
 }
 EXPORT_SYMBOL(vm_insert_page);
 
+int vm_insert_pages(struct vm_area_struct *vma, unsigned long addr,
+			struct page **pages, unsigned long *num)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(vm_insert_pages);
+
 int vm_map_pages(struct vm_area_struct *vma, struct page **pages,
 			unsigned long num)
 {

[PATCH 6.6 095/166] io_uring: get rid of remap_pfn_range() for mapping rings/sqes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 3ab1db3c6039e02a9deb9d5091d28d559917a645 upstream.

Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_pages() and have it Just Work.

If possible, allocate a single compound page that covers the range that
is needed. If that works, then we can just use page_address() on that
page. If we fail to get a compound page, allocate single pages and use
vmap() to map them into the kernel virtual address space.

This just covers the rings/sqes, the other remaining user of the mmap
remap_pfn_range() user will be converted separately. Once that is done,
we can kill the old alloc/free code.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |  139 +++++++++++++++++++++++++++++++++++++++++++++++++---
 io_uring/io_uring.h |    2 
 2 files changed, 133 insertions(+), 8 deletions(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2683,6 +2683,36 @@ static int io_cqring_wait(struct io_ring
 	return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0;
 }
 
+static void io_pages_unmap(void *ptr, struct page ***pages,
+			   unsigned short *npages)
+{
+	bool do_vunmap = false;
+
+	if (!ptr)
+		return;
+
+	if (*npages) {
+		struct page **to_free = *pages;
+		int i;
+
+		/*
+		 * Only did vmap for the non-compound multiple page case.
+		 * For the compound page, we just need to put the head.
+		 */
+		if (PageCompound(to_free[0]))
+			*npages = 1;
+		else if (*npages > 1)
+			do_vunmap = true;
+		for (i = 0; i < *npages; i++)
+			put_page(to_free[i]);
+	}
+	if (do_vunmap)
+		vunmap(ptr);
+	kvfree(*pages);
+	*pages = NULL;
+	*npages = 0;
+}
+
 void io_mem_free(void *ptr)
 {
 	if (!ptr)
@@ -2787,8 +2817,8 @@ static void *io_sqes_map(struct io_ring_
 static void io_rings_free(struct io_ring_ctx *ctx)
 {
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP)) {
-		io_mem_free(ctx->rings);
-		io_mem_free(ctx->sq_sqes);
+		io_pages_unmap(ctx->rings, &ctx->ring_pages, &ctx->n_ring_pages);
+		io_pages_unmap(ctx->sq_sqes, &ctx->sqe_pages, &ctx->n_sqe_pages);
 	} else {
 		io_pages_free(&ctx->ring_pages, ctx->n_ring_pages);
 		ctx->n_ring_pages = 0;
@@ -2800,6 +2830,80 @@ static void io_rings_free(struct io_ring
 	ctx->sq_sqes = NULL;
 }
 
+static void *io_mem_alloc_compound(struct page **pages, int nr_pages,
+				   size_t size, gfp_t gfp)
+{
+	struct page *page;
+	int i, order;
+
+	order = get_order(size);
+	if (order > 10)
+		return ERR_PTR(-ENOMEM);
+	else if (order)
+		gfp |= __GFP_COMP;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < nr_pages; i++)
+		pages[i] = page + i;
+
+	return page_address(page);
+}
+
+static void *io_mem_alloc_single(struct page **pages, int nr_pages, size_t size,
+				 gfp_t gfp)
+{
+	void *ret;
+	int i;
+
+	for (i = 0; i < nr_pages; i++) {
+		pages[i] = alloc_page(gfp);
+		if (!pages[i])
+			goto err;
+	}
+
+	ret = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL);
+	if (ret)
+		return ret;
+err:
+	while (i--)
+		put_page(pages[i]);
+	return ERR_PTR(-ENOMEM);
+}
+
+static void *io_pages_map(struct page ***out_pages, unsigned short *npages,
+			  size_t size)
+{
+	gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN;
+	struct page **pages;
+	int nr_pages;
+	void *ret;
+
+	nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	pages = kvmalloc_array(nr_pages, sizeof(struct page *), gfp);
+	if (!pages)
+		return ERR_PTR(-ENOMEM);
+
+	ret = io_mem_alloc_compound(pages, nr_pages, size, gfp);
+	if (!IS_ERR(ret))
+		goto done;
+
+	ret = io_mem_alloc_single(pages, nr_pages, size, gfp);
+	if (!IS_ERR(ret)) {
+done:
+		*out_pages = pages;
+		*npages = nr_pages;
+		return ret;
+	}
+
+	kvfree(pages);
+	*out_pages = NULL;
+	*npages = 0;
+	return ret;
+}
+
 void *io_mem_alloc(size_t size)
 {
 	gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP;
@@ -3463,14 +3567,12 @@ static void *io_uring_validate_mmap_requ
 		/* Don't allow mmap if the ring was setup without it */
 		if (ctx->flags & IORING_SETUP_NO_MMAP)
 			return ERR_PTR(-EINVAL);
-		ptr = ctx->rings;
-		break;
+		return ctx->rings;
 	case IORING_OFF_SQES:
 		/* Don't allow mmap if the ring was setup without it */
 		if (ctx->flags & IORING_SETUP_NO_MMAP)
 			return ERR_PTR(-EINVAL);
-		ptr = ctx->sq_sqes;
-		break;
+		return ctx->sq_sqes;
 	case IORING_OFF_PBUF_RING: {
 		struct io_buffer_list *bl;
 		unsigned int bgid;
@@ -3494,11 +3596,22 @@ static void *io_uring_validate_mmap_requ
 	return ptr;
 }
 
+int io_uring_mmap_pages(struct io_ring_ctx *ctx, struct vm_area_struct *vma,
+			struct page **pages, int npages)
+{
+	unsigned long nr_pages = npages;
+
+	vm_flags_set(vma, VM_DONTEXPAND);
+	return vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
+}
+
 #ifdef CONFIG_MMU
 
 static __cold int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
 {
+	struct io_ring_ctx *ctx = file->private_data;
 	size_t sz = vma->vm_end - vma->vm_start;
+	long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long pfn;
 	void *ptr;
 
@@ -3506,6 +3619,16 @@ static __cold int io_uring_mmap(struct f
 	if (IS_ERR(ptr))
 		return PTR_ERR(ptr);
 
+	switch (offset & IORING_OFF_MMAP_MASK) {
+	case IORING_OFF_SQ_RING:
+	case IORING_OFF_CQ_RING:
+		return io_uring_mmap_pages(ctx, vma, ctx->ring_pages,
+						ctx->n_ring_pages);
+	case IORING_OFF_SQES:
+		return io_uring_mmap_pages(ctx, vma, ctx->sqe_pages,
+						ctx->n_sqe_pages);
+	}
+
 	pfn = virt_to_phys(ptr) >> PAGE_SHIFT;
 	return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
 }
@@ -3795,7 +3918,7 @@ static __cold int io_allocate_scq_urings
 		return -EOVERFLOW;
 
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP))
-		rings = io_mem_alloc(size);
+		rings = io_pages_map(&ctx->ring_pages, &ctx->n_ring_pages, size);
 	else
 		rings = io_rings_map(ctx, p->cq_off.user_addr, size);
 
@@ -3820,7 +3943,7 @@ static __cold int io_allocate_scq_urings
 	}
 
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP))
-		ptr = io_mem_alloc(size);
+		ptr = io_pages_map(&ctx->sqe_pages, &ctx->n_sqe_pages, size);
 	else
 		ptr = io_sqes_map(ctx, p->sq_off.user_addr, size);
 
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -55,6 +55,8 @@ bool io_fill_cqe_req_aux(struct io_kiocb
 void __io_commit_cqring_flush(struct io_ring_ctx *ctx);
 
 struct page **io_pin_pages(unsigned long ubuf, unsigned long len, int *npages);
+int io_uring_mmap_pages(struct io_ring_ctx *ctx, struct vm_area_struct *vma,
+			struct page **pages, int npages);
 
 struct file *io_file_get_normal(struct io_kiocb *req, int fd);
 struct file *io_file_get_fixed(struct io_kiocb *req, int fd,

[PATCH 6.6 096/166] io_uring: dont attempt to mmap larger than what the user asks for

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 06fe9b1df1086b42718d632aa57e8f7cd1a66a21 upstream.

If IORING_FEAT_SINGLE_MMAP is ignored, as can happen if an application
uses an ancient liburing or does setup manually, then 3 mmap's are
required to map the ring into userspace. The kernel will still have
collapsed the mappings, however userspace may ask for mapping them
individually. If so, then we should not use the full number of ring
pages, as it may exceed the partial mapping. Doing so will yield an
-EFAULT from vm_insert_pages(), as we pass in more pages than what the
application asked for.

Cap the number of pages to match what the application asked for, for
the particular mapping operation.

Reported-by: Lucas Mülling <lmulling@proton.me>
Link: https://github.com/axboe/liburing/issues/1157
Fixes: 3ab1db3c6039 ("io_uring: get rid of remap_pfn_range() for mapping rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -3612,6 +3612,7 @@ static __cold int io_uring_mmap(struct f
 	struct io_ring_ctx *ctx = file->private_data;
 	size_t sz = vma->vm_end - vma->vm_start;
 	long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned int npages;
 	unsigned long pfn;
 	void *ptr;
 
@@ -3622,8 +3623,8 @@ static __cold int io_uring_mmap(struct f
 	switch (offset & IORING_OFF_MMAP_MASK) {
 	case IORING_OFF_SQ_RING:
 	case IORING_OFF_CQ_RING:
-		return io_uring_mmap_pages(ctx, vma, ctx->ring_pages,
-						ctx->n_ring_pages);
+		npages = min(ctx->n_ring_pages, (sz + PAGE_SIZE - 1) >> PAGE_SHIFT);
+		return io_uring_mmap_pages(ctx, vma, ctx->ring_pages, npages);
 	case IORING_OFF_SQES:
 		return io_uring_mmap_pages(ctx, vma, ctx->sqe_pages,
 						ctx->n_sqe_pages);

[PATCH 6.6 097/166] io_uring: fix corner case forgetting to vunmap

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Begunkov <asml.silence@gmail.com>

Commit 43eef70e7e2ac74e7767731dd806720c7fb5e010 upstream.

io_pages_unmap() is a bit tricky in trying to figure whether the pages
were previously vmap'ed or not. In particular If there is juts one page
it belives there is no need to vunmap. Paired io_pages_map(), however,
could've failed io_mem_alloc_compound() and attempted to
io_mem_alloc_single(), which does vmap, and that leads to unpaired vmap.

The solution is to fail if io_mem_alloc_compound() can't allocate a
single page. That's the easiest way to deal with it, and those two
functions are getting removed soon, so no need to overcomplicate it.

Cc: stable@vger.kernel.org
Fixes: 3ab1db3c6039e ("io_uring: get rid of remap_pfn_range() for mapping rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/477e75a3907a2fe83249e49c0a92cd480b2c60e0.1732569842.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2889,6 +2889,8 @@ static void *io_pages_map(struct page **
 	ret = io_mem_alloc_compound(pages, nr_pages, size, gfp);
 	if (!IS_ERR(ret))
 		goto done;
+	if (nr_pages == 1)
+		goto fail;
 
 	ret = io_mem_alloc_single(pages, nr_pages, size, gfp);
 	if (!IS_ERR(ret)) {
@@ -2897,7 +2899,7 @@ done:
 		*npages = nr_pages;
 		return ret;
 	}
-
+fail:
 	kvfree(pages);
 	*out_pages = NULL;
 	*npages = 0;

[PATCH 6.6 098/166] io_uring: use vmap() for ring mapping

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 09fc75e0c035a2cabb8caa15cec6e85159dd94f0 upstream.

This is the last holdout which does odd page checking, convert it to
vmap just like what is done for the non-mmap path.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |   38 +++++++++-----------------------------
 1 file changed, 9 insertions(+), 29 deletions(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -64,7 +64,6 @@
 #include <linux/sched/mm.h>
 #include <linux/uaccess.h>
 #include <linux/nospec.h>
-#include <linux/highmem.h>
 #include <linux/fsnotify.h>
 #include <linux/fadvise.h>
 #include <linux/task_work.h>
@@ -2745,7 +2744,7 @@ static void *__io_uaddr_map(struct page
 	struct page **page_array;
 	unsigned int nr_pages;
 	void *page_addr;
-	int ret, i, pinned;
+	int ret, pinned;
 
 	*npages = 0;
 
@@ -2767,34 +2766,13 @@ static void *__io_uaddr_map(struct page
 		goto free_pages;
 	}
 
-	page_addr = page_address(page_array[0]);
-	for (i = 0; i < nr_pages; i++) {
-		ret = -EINVAL;
-
-		/*
-		 * Can't support mapping user allocated ring memory on 32-bit
-		 * archs where it could potentially reside in highmem. Just
-		 * fail those with -EINVAL, just like we did on kernels that
-		 * didn't support this feature.
-		 */
-		if (PageHighMem(page_array[i]))
-			goto free_pages;
-
-		/*
-		 * No support for discontig pages for now, should either be a
-		 * single normal page, or a huge page. Later on we can add
-		 * support for remapping discontig pages, for now we will
-		 * just fail them with EINVAL.
-		 */
-		if (page_address(page_array[i]) != page_addr)
-			goto free_pages;
-		page_addr += PAGE_SIZE;
+	page_addr = vmap(page_array, nr_pages, VM_MAP, PAGE_KERNEL);
+	if (page_addr) {
+		*pages = page_array;
+		*npages = nr_pages;
+		return page_addr;
 	}
-
-	*pages = page_array;
-	*npages = nr_pages;
-	return page_to_virt(page_array[0]);
-
+	ret = -ENOMEM;
 free_pages:
 	io_pages_free(&page_array, pinned > 0 ? pinned : 0);
 	return ERR_PTR(ret);
@@ -2824,6 +2802,8 @@ static void io_rings_free(struct io_ring
 		ctx->n_ring_pages = 0;
 		io_pages_free(&ctx->sqe_pages, ctx->n_sqe_pages);
 		ctx->n_sqe_pages = 0;
+		vunmap(ctx->rings);
+		vunmap(ctx->sq_sqes);
 	}
 
 	ctx->rings = NULL;

[PATCH 6.6 099/166] io_uring: unify io_pin_pages()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 1943f96b3816e0f0d3d6686374d6e1d617c8b42c upstream.

Move it into io_uring.c where it belongs, and use it in there as well
rather than have two implementations of this.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/io_uring.c |   61 +++++++++++++++++++++++++++++++++++-----------------
 io_uring/rsrc.c     |   39 ---------------------------------
 2 files changed, 42 insertions(+), 58 deletions(-)

--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2738,33 +2738,57 @@ static void io_pages_free(struct page **
 	*pages = NULL;
 }
 
+struct page **io_pin_pages(unsigned long uaddr, unsigned long len, int *npages)
+{
+	unsigned long start, end, nr_pages;
+	struct page **pages;
+	int ret;
+
+	end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	start = uaddr >> PAGE_SHIFT;
+	nr_pages = end - start;
+	if (WARN_ON_ONCE(!nr_pages))
+		return ERR_PTR(-EINVAL);
+
+	pages = kvmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL);
+	if (!pages)
+		return ERR_PTR(-ENOMEM);
+
+	ret = pin_user_pages_fast(uaddr, nr_pages, FOLL_WRITE | FOLL_LONGTERM,
+					pages);
+	/* success, mapped all pages */
+	if (ret == nr_pages) {
+		*npages = nr_pages;
+		return pages;
+	}
+
+	/* partial map, or didn't map anything */
+	if (ret >= 0) {
+		/* if we did partial map, release any pages we did get */
+		if (ret)
+			unpin_user_pages(pages, ret);
+		ret = -EFAULT;
+	}
+	kvfree(pages);
+	return ERR_PTR(ret);
+}
+
 static void *__io_uaddr_map(struct page ***pages, unsigned short *npages,
 			    unsigned long uaddr, size_t size)
 {
 	struct page **page_array;
 	unsigned int nr_pages;
 	void *page_addr;
-	int ret, pinned;
 
 	*npages = 0;
 
 	if (uaddr & (PAGE_SIZE - 1) || !size)
 		return ERR_PTR(-EINVAL);
 
-	nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	if (nr_pages > USHRT_MAX)
-		return ERR_PTR(-EINVAL);
-	page_array = kvmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL);
-	if (!page_array)
-		return ERR_PTR(-ENOMEM);
-
-
-	pinned = pin_user_pages_fast(uaddr, nr_pages, FOLL_WRITE | FOLL_LONGTERM,
-				     page_array);
-	if (pinned != nr_pages) {
-		ret = (pinned < 0) ? pinned : -EFAULT;
-		goto free_pages;
-	}
+	nr_pages = 0;
+	page_array = io_pin_pages(uaddr, size, &nr_pages);
+	if (IS_ERR(page_array))
+		return page_array;
 
 	page_addr = vmap(page_array, nr_pages, VM_MAP, PAGE_KERNEL);
 	if (page_addr) {
@@ -2772,10 +2796,9 @@ static void *__io_uaddr_map(struct page
 		*npages = nr_pages;
 		return page_addr;
 	}
-	ret = -ENOMEM;
-free_pages:
-	io_pages_free(&page_array, pinned > 0 ? pinned : 0);
-	return ERR_PTR(ret);
+
+	io_pages_free(&page_array, nr_pages);
+	return ERR_PTR(-ENOMEM);
 }
 
 static void *io_rings_map(struct io_ring_ctx *ctx, unsigned long uaddr,
--- a/io_uring/rsrc.c
+++ b/io_uring/rsrc.c
@@ -873,45 +873,6 @@ static int io_buffer_account_pin(struct
 	return ret;
 }
 
-struct page **io_pin_pages(unsigned long ubuf, unsigned long len, int *npages)
-{
-	unsigned long start, end, nr_pages;
-	struct page **pages = NULL;
-	int pret, ret = -ENOMEM;
-
-	end = (ubuf + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	start = ubuf >> PAGE_SHIFT;
-	nr_pages = end - start;
-
-	pages = kvmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL);
-	if (!pages)
-		goto done;
-
-	ret = 0;
-	mmap_read_lock(current->mm);
-	pret = pin_user_pages(ubuf, nr_pages, FOLL_WRITE | FOLL_LONGTERM,
-			      pages);
-	if (pret == nr_pages)
-		*npages = nr_pages;
-	else
-		ret = pret < 0 ? pret : -EFAULT;
-
-	mmap_read_unlock(current->mm);
-	if (ret) {
-		/* if we did partial map, release any pages we did get */
-		if (pret > 0)
-			unpin_user_pages(pages, pret);
-		goto done;
-	}
-	ret = 0;
-done:
-	if (ret < 0) {
-		kvfree(pages);
-		pages = ERR_PTR(ret);
-	}
-	return pages;
-}
-
 static int io_sqe_buffer_register(struct io_ring_ctx *ctx, struct iovec *iov,
 				  struct io_mapped_ubuf **pimu,
 				  struct page **last_hpage)

[PATCH 6.6 100/166] io_uring/kbuf: vmap pinned buffer ring

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit e270bfd22a2a10d1cfbaddf23e79b6d0b405d21e upstream.

This avoids needing to care about HIGHMEM, and it makes the buffer
indexing easier as both ring provided buffer methods are now virtually
mapped in a contigious fashion.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/kbuf.c |   39 +++++++++++++++------------------------
 1 file changed, 15 insertions(+), 24 deletions(-)

--- a/io_uring/kbuf.c
+++ b/io_uring/kbuf.c
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/namei.h>
 #include <linux/poll.h>
+#include <linux/vmalloc.h>
 #include <linux/io_uring.h>
 
 #include <uapi/linux/io_uring.h>
@@ -153,15 +154,7 @@ static void __user *io_ring_buffer_selec
 		return NULL;
 
 	head &= bl->mask;
-	/* mmaped buffers are always contig */
-	if (bl->is_mmap || head < IO_BUFFER_LIST_BUF_PER_PAGE) {
-		buf = &br->bufs[head];
-	} else {
-		int off = head & (IO_BUFFER_LIST_BUF_PER_PAGE - 1);
-		int index = head / IO_BUFFER_LIST_BUF_PER_PAGE;
-		buf = page_address(bl->buf_pages[index]);
-		buf += off;
-	}
+	buf = &br->bufs[head];
 	if (*len == 0 || *len > buf->len)
 		*len = buf->len;
 	req->flags |= REQ_F_BUFFER_RING;
@@ -249,6 +242,7 @@ static int __io_remove_buffers(struct io
 			for (j = 0; j < bl->buf_nr_pages; j++)
 				unpin_user_page(bl->buf_pages[j]);
 			kvfree(bl->buf_pages);
+			vunmap(bl->buf_ring);
 			bl->buf_pages = NULL;
 			bl->buf_nr_pages = 0;
 		}
@@ -501,9 +495,9 @@ err:
 static int io_pin_pbuf_ring(struct io_uring_buf_reg *reg,
 			    struct io_buffer_list *bl)
 {
-	struct io_uring_buf_ring *br;
+	struct io_uring_buf_ring *br = NULL;
+	int nr_pages, ret, i;
 	struct page **pages;
-	int i, nr_pages;
 
 	pages = io_pin_pages(reg->ring_addr,
 			     flex_array_size(br, bufs, reg->ring_entries),
@@ -511,18 +505,12 @@ static int io_pin_pbuf_ring(struct io_ur
 	if (IS_ERR(pages))
 		return PTR_ERR(pages);
 
-	/*
-	 * Apparently some 32-bit boxes (ARM) will return highmem pages,
-	 * which then need to be mapped. We could support that, but it'd
-	 * complicate the code and slowdown the common cases quite a bit.
-	 * So just error out, returning -EINVAL just like we did on kernels
-	 * that didn't support mapped buffer rings.
-	 */
-	for (i = 0; i < nr_pages; i++)
-		if (PageHighMem(pages[i]))
-			goto error_unpin;
+	br = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL);
+	if (!br) {
+		ret = -ENOMEM;
+		goto error_unpin;
+	}
 
-	br = page_address(pages[0]);
 #ifdef SHM_COLOUR
 	/*
 	 * On platforms that have specific aliasing requirements, SHM_COLOUR
@@ -533,8 +521,10 @@ static int io_pin_pbuf_ring(struct io_ur
 	 * should use IOU_PBUF_RING_MMAP instead, and liburing will handle
 	 * this transparently.
 	 */
-	if ((reg->ring_addr | (unsigned long) br) & (SHM_COLOUR - 1))
+	if ((reg->ring_addr | (unsigned long) br) & (SHM_COLOUR - 1)) {
+		ret = -EINVAL;
 		goto error_unpin;
+	}
 #endif
 	bl->buf_pages = pages;
 	bl->buf_nr_pages = nr_pages;
@@ -546,7 +536,8 @@ error_unpin:
 	for (i = 0; i < nr_pages; i++)
 		unpin_user_page(pages[i]);
 	kvfree(pages);
-	return -EINVAL;
+	vunmap(br);
+	return ret;
 }
 
 /*

[PATCH 6.6 101/166] io_uring/kbuf: use vm_insert_pages() for mmaped pbuf ring

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 87585b05757dc70545efb434669708d276125559 upstream.

Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_page() and have it Just Work.

This requires a bit of effort on the mmap lookup side, as the ctx
uring_lock isn't held, which  otherwise protects buffer_lists from being
torn down, and it's not safe to grab from mmap context that would
introduce an ABBA deadlock between the mmap lock and the ctx uring_lock.
Instead, lookup the buffer_list under RCU, as the the list is RCU freed
already. Use the existing reference count to determine whether it's
possible to safely grab a reference to it (eg if it's not zero already),
and drop that reference when done with the mapping. If the mmap
reference is the last one, the buffer_list and the associated memory can
go away, since the vma insertion has references to the inserted pages at
that point.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/io_uring_types.h |    3 
 io_uring/io_uring.c            |   58 ++++-------------
 io_uring/io_uring.h            |    6 +
 io_uring/kbuf.c                |  137 ++++++++---------------------------------
 io_uring/kbuf.h                |    3 
 5 files changed, 48 insertions(+), 159 deletions(-)

--- a/include/linux/io_uring_types.h
+++ b/include/linux/io_uring_types.h
@@ -326,9 +326,6 @@ struct io_ring_ctx {
 
 	struct list_head	io_buffers_cache;
 
-	/* deferred free list, protected by ->uring_lock */
-	struct hlist_head	io_buf_list;
-
 	/* Keep this last, we don't need it for the fast path */
 	struct wait_queue_head		poll_wq;
 	struct io_restriction		restrictions;
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -311,7 +311,6 @@ static __cold struct io_ring_ctx *io_rin
 	INIT_LIST_HEAD(&ctx->sqd_list);
 	INIT_LIST_HEAD(&ctx->cq_overflow_list);
 	INIT_LIST_HEAD(&ctx->io_buffers_cache);
-	INIT_HLIST_HEAD(&ctx->io_buf_list);
 	io_alloc_cache_init(&ctx->rsrc_node_cache, IO_NODE_ALLOC_CACHE_MAX,
 			    sizeof(struct io_rsrc_node));
 	io_alloc_cache_init(&ctx->apoll_cache, IO_ALLOC_CACHE_MAX,
@@ -2682,15 +2681,15 @@ static int io_cqring_wait(struct io_ring
 	return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0;
 }
 
-static void io_pages_unmap(void *ptr, struct page ***pages,
-			   unsigned short *npages)
+void io_pages_unmap(void *ptr, struct page ***pages, unsigned short *npages,
+		    bool put_pages)
 {
 	bool do_vunmap = false;
 
 	if (!ptr)
 		return;
 
-	if (*npages) {
+	if (put_pages && *npages) {
 		struct page **to_free = *pages;
 		int i;
 
@@ -2712,14 +2711,6 @@ static void io_pages_unmap(void *ptr, st
 	*npages = 0;
 }
 
-void io_mem_free(void *ptr)
-{
-	if (!ptr)
-		return;
-
-	folio_put(virt_to_folio(ptr));
-}
-
 static void io_pages_free(struct page ***pages, int npages)
 {
 	struct page **page_array;
@@ -2818,8 +2809,10 @@ static void *io_sqes_map(struct io_ring_
 static void io_rings_free(struct io_ring_ctx *ctx)
 {
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP)) {
-		io_pages_unmap(ctx->rings, &ctx->ring_pages, &ctx->n_ring_pages);
-		io_pages_unmap(ctx->sq_sqes, &ctx->sqe_pages, &ctx->n_sqe_pages);
+		io_pages_unmap(ctx->rings, &ctx->ring_pages, &ctx->n_ring_pages,
+				true);
+		io_pages_unmap(ctx->sq_sqes, &ctx->sqe_pages, &ctx->n_sqe_pages,
+				true);
 	} else {
 		io_pages_free(&ctx->ring_pages, ctx->n_ring_pages);
 		ctx->n_ring_pages = 0;
@@ -2876,8 +2869,8 @@ err:
 	return ERR_PTR(-ENOMEM);
 }
 
-static void *io_pages_map(struct page ***out_pages, unsigned short *npages,
-			  size_t size)
+void *io_pages_map(struct page ***out_pages, unsigned short *npages,
+		   size_t size)
 {
 	gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN;
 	struct page **pages;
@@ -2909,17 +2902,6 @@ fail:
 	return ret;
 }
 
-void *io_mem_alloc(size_t size)
-{
-	gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP;
-	void *ret;
-
-	ret = (void *) __get_free_pages(gfp, get_order(size));
-	if (ret)
-		return ret;
-	return ERR_PTR(-ENOMEM);
-}
-
 static unsigned long rings_size(struct io_ring_ctx *ctx, unsigned int sq_entries,
 				unsigned int cq_entries, size_t *sq_offset)
 {
@@ -3073,7 +3055,6 @@ static __cold void io_ring_ctx_free(stru
 		ctx->mm_account = NULL;
 	}
 	io_rings_free(ctx);
-	io_kbuf_mmap_list_free(ctx);
 
 	percpu_ref_exit(&ctx->refs);
 	free_uid(ctx->user);
@@ -3563,10 +3544,8 @@ static void *io_uring_validate_mmap_requ
 {
 	struct io_ring_ctx *ctx = file->private_data;
 	loff_t offset = pgoff << PAGE_SHIFT;
-	struct page *page;
-	void *ptr;
 
-	switch (offset & IORING_OFF_MMAP_MASK) {
+	switch ((pgoff << PAGE_SHIFT) & IORING_OFF_MMAP_MASK) {
 	case IORING_OFF_SQ_RING:
 	case IORING_OFF_CQ_RING:
 		/* Don't allow mmap if the ring was setup without it */
@@ -3581,6 +3560,7 @@ static void *io_uring_validate_mmap_requ
 	case IORING_OFF_PBUF_RING: {
 		struct io_buffer_list *bl;
 		unsigned int bgid;
+		void *ptr;
 
 		bgid = (offset & ~IORING_OFF_MMAP_MASK) >> IORING_OFF_PBUF_SHIFT;
 		bl = io_pbuf_get_bl(ctx, bgid);
@@ -3588,17 +3568,11 @@ static void *io_uring_validate_mmap_requ
 			return bl;
 		ptr = bl->buf_ring;
 		io_put_bl(ctx, bl);
-		break;
+		return ptr;
 		}
-	default:
-		return ERR_PTR(-EINVAL);
 	}
 
-	page = virt_to_head_page(ptr);
-	if (sz > page_size(page))
-		return ERR_PTR(-EINVAL);
-
-	return ptr;
+	return ERR_PTR(-EINVAL);
 }
 
 int io_uring_mmap_pages(struct io_ring_ctx *ctx, struct vm_area_struct *vma,
@@ -3618,7 +3592,6 @@ static __cold int io_uring_mmap(struct f
 	size_t sz = vma->vm_end - vma->vm_start;
 	long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned int npages;
-	unsigned long pfn;
 	void *ptr;
 
 	ptr = io_uring_validate_mmap_request(file, vma->vm_pgoff, sz);
@@ -3633,10 +3606,11 @@ static __cold int io_uring_mmap(struct f
 	case IORING_OFF_SQES:
 		return io_uring_mmap_pages(ctx, vma, ctx->sqe_pages,
 						ctx->n_sqe_pages);
+	case IORING_OFF_PBUF_RING:
+		return io_pbuf_mmap(file, vma);
 	}
 
-	pfn = virt_to_phys(ptr) >> PAGE_SHIFT;
-	return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
+	return -EINVAL;
 }
 
 static unsigned long io_uring_mmu_get_unmapped_area(struct file *filp,
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -93,8 +93,10 @@ bool __io_alloc_req_refill(struct io_rin
 bool io_match_task_safe(struct io_kiocb *head, struct task_struct *task,
 			bool cancel_all);
 
-void *io_mem_alloc(size_t size);
-void io_mem_free(void *ptr);
+void *io_pages_map(struct page ***out_pages, unsigned short *npages,
+		   size_t size);
+void io_pages_unmap(void *ptr, struct page ***pages, unsigned short *npages,
+		    bool put_pages);
 
 #if defined(CONFIG_PROVE_LOCKING)
 static inline void io_lockdep_assert_cq_locked(struct io_ring_ctx *ctx)
--- a/io_uring/kbuf.c
+++ b/io_uring/kbuf.c
@@ -30,25 +30,12 @@ struct io_provide_buf {
 	__u16				bid;
 };
 
-static inline struct io_buffer_list *__io_buffer_get_list(struct io_ring_ctx *ctx,
-							  unsigned int bgid)
-{
-	return xa_load(&ctx->io_bl_xa, bgid);
-}
-
-struct io_buf_free {
-	struct hlist_node		list;
-	void				*mem;
-	size_t				size;
-	int				inuse;
-};
-
 static inline struct io_buffer_list *io_buffer_get_list(struct io_ring_ctx *ctx,
 							unsigned int bgid)
 {
 	lockdep_assert_held(&ctx->uring_lock);
 
-	return __io_buffer_get_list(ctx, bgid);
+	return xa_load(&ctx->io_bl_xa, bgid);
 }
 
 static int io_buffer_add_list(struct io_ring_ctx *ctx,
@@ -199,24 +186,6 @@ void __user *io_buffer_select(struct io_
 	return ret;
 }
 
-/*
- * Mark the given mapped range as free for reuse
- */
-static void io_kbuf_mark_free(struct io_ring_ctx *ctx, struct io_buffer_list *bl)
-{
-	struct io_buf_free *ibf;
-
-	hlist_for_each_entry(ibf, &ctx->io_buf_list, list) {
-		if (bl->buf_ring == ibf->mem) {
-			ibf->inuse = 0;
-			return;
-		}
-	}
-
-	/* can't happen... */
-	WARN_ON_ONCE(1);
-}
-
 static int __io_remove_buffers(struct io_ring_ctx *ctx,
 			       struct io_buffer_list *bl, unsigned nbufs)
 {
@@ -228,23 +197,16 @@ static int __io_remove_buffers(struct io
 
 	if (bl->is_mapped) {
 		i = bl->buf_ring->tail - bl->head;
-		if (bl->is_mmap) {
-			/*
-			 * io_kbuf_list_free() will free the page(s) at
-			 * ->release() time.
-			 */
-			io_kbuf_mark_free(ctx, bl);
-			bl->buf_ring = NULL;
-			bl->is_mmap = 0;
-		} else if (bl->buf_nr_pages) {
+		if (bl->buf_nr_pages) {
 			int j;
 
-			for (j = 0; j < bl->buf_nr_pages; j++)
-				unpin_user_page(bl->buf_pages[j]);
-			kvfree(bl->buf_pages);
-			vunmap(bl->buf_ring);
-			bl->buf_pages = NULL;
-			bl->buf_nr_pages = 0;
+			if (!bl->is_mmap) {
+				for (j = 0; j < bl->buf_nr_pages; j++)
+					unpin_user_page(bl->buf_pages[j]);
+			}
+			io_pages_unmap(bl->buf_ring, &bl->buf_pages,
+					&bl->buf_nr_pages, bl->is_mmap);
+			bl->is_mmap = 0;
 		}
 		/* make sure it's seen as empty */
 		INIT_LIST_HEAD(&bl->buf_list);
@@ -540,63 +502,17 @@ error_unpin:
 	return ret;
 }
 
-/*
- * See if we have a suitable region that we can reuse, rather than allocate
- * both a new io_buf_free and mem region again. We leave it on the list as
- * even a reused entry will need freeing at ring release.
- */
-static struct io_buf_free *io_lookup_buf_free_entry(struct io_ring_ctx *ctx,
-						    size_t ring_size)
-{
-	struct io_buf_free *ibf, *best = NULL;
-	size_t best_dist;
-
-	hlist_for_each_entry(ibf, &ctx->io_buf_list, list) {
-		size_t dist;
-
-		if (ibf->inuse || ibf->size < ring_size)
-			continue;
-		dist = ibf->size - ring_size;
-		if (!best || dist < best_dist) {
-			best = ibf;
-			if (!dist)
-				break;
-			best_dist = dist;
-		}
-	}
-
-	return best;
-}
-
 static int io_alloc_pbuf_ring(struct io_ring_ctx *ctx,
 			      struct io_uring_buf_reg *reg,
 			      struct io_buffer_list *bl)
 {
-	struct io_buf_free *ibf;
 	size_t ring_size;
-	void *ptr;
 
 	ring_size = reg->ring_entries * sizeof(struct io_uring_buf_ring);
 
-	/* Reuse existing entry, if we can */
-	ibf = io_lookup_buf_free_entry(ctx, ring_size);
-	if (!ibf) {
-		ptr = io_mem_alloc(ring_size);
-		if (IS_ERR(ptr))
-			return PTR_ERR(ptr);
-
-		/* Allocate and store deferred free entry */
-		ibf = kmalloc(sizeof(*ibf), GFP_KERNEL_ACCOUNT);
-		if (!ibf) {
-			io_mem_free(ptr);
-			return -ENOMEM;
-		}
-		ibf->mem = ptr;
-		ibf->size = ring_size;
-		hlist_add_head(&ibf->list, &ctx->io_buf_list);
-	}
-	ibf->inuse = 1;
-	bl->buf_ring = ibf->mem;
+	bl->buf_ring = io_pages_map(&bl->buf_pages, &bl->buf_nr_pages, ring_size);
+	if (!bl->buf_ring)
+		return -ENOMEM;
 	bl->is_mapped = 1;
 	bl->is_mmap = 1;
 	return 0;
@@ -719,18 +635,19 @@ struct io_buffer_list *io_pbuf_get_bl(st
 	return ERR_PTR(-EINVAL);
 }
 
-/*
- * Called at or after ->release(), free the mmap'ed buffers that we used
- * for memory mapped provided buffer rings.
- */
-void io_kbuf_mmap_list_free(struct io_ring_ctx *ctx)
-{
-	struct io_buf_free *ibf;
-	struct hlist_node *tmp;
-
-	hlist_for_each_entry_safe(ibf, tmp, &ctx->io_buf_list, list) {
-		hlist_del(&ibf->list);
-		io_mem_free(ibf->mem);
-		kfree(ibf);
-	}
+int io_pbuf_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct io_ring_ctx *ctx = file->private_data;
+	loff_t pgoff = vma->vm_pgoff << PAGE_SHIFT;
+	struct io_buffer_list *bl;
+	int bgid, ret;
+
+	bgid = (pgoff & ~IORING_OFF_MMAP_MASK) >> IORING_OFF_PBUF_SHIFT;
+	bl = io_pbuf_get_bl(ctx, bgid);
+	if (IS_ERR(bl))
+		return PTR_ERR(bl);
+
+	ret = io_uring_mmap_pages(ctx, vma, bl->buf_pages, bl->buf_nr_pages);
+	io_put_bl(ctx, bl);
+	return ret;
 }
--- a/io_uring/kbuf.h
+++ b/io_uring/kbuf.h
@@ -54,8 +54,6 @@ int io_provide_buffers(struct io_kiocb *
 int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg);
 int io_unregister_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg);
 
-void io_kbuf_mmap_list_free(struct io_ring_ctx *ctx);
-
 unsigned int __io_put_kbuf(struct io_kiocb *req, unsigned issue_flags);
 
 void io_kbuf_recycle_legacy(struct io_kiocb *req, unsigned issue_flags);
@@ -63,6 +61,7 @@ void io_kbuf_recycle_legacy(struct io_ki
 void io_put_bl(struct io_ring_ctx *ctx, struct io_buffer_list *bl);
 struct io_buffer_list *io_pbuf_get_bl(struct io_ring_ctx *ctx,
 				      unsigned long bgid);
+int io_pbuf_mmap(struct file *file, struct vm_area_struct *vma);
 
 static inline void io_kbuf_recycle_ring(struct io_kiocb *req)
 {

[PATCH 6.6 102/166] io_uring: use unpin_user_pages() where appropriate

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

Commit 18595c0a58ae29ac6a996c5b664610119b73182d upstream.

There are a few cases of open-rolled loops around unpin_user_page(), use
the generic helper instead.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/kbuf.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/io_uring/kbuf.c
+++ b/io_uring/kbuf.c
@@ -458,8 +458,8 @@ static int io_pin_pbuf_ring(struct io_ur
 			    struct io_buffer_list *bl)
 {
 	struct io_uring_buf_ring *br = NULL;
-	int nr_pages, ret, i;
 	struct page **pages;
+	int nr_pages, ret;
 
 	pages = io_pin_pages(reg->ring_addr,
 			     flex_array_size(br, bufs, reg->ring_entries),
@@ -495,8 +495,7 @@ static int io_pin_pbuf_ring(struct io_ur
 	bl->is_mmap = 0;
 	return 0;
 error_unpin:
-	for (i = 0; i < nr_pages; i++)
-		unpin_user_page(pages[i]);
+	unpin_user_pages(pages, nr_pages);
 	kvfree(pages);
 	vunmap(br);
 	return ret;

[PATCH 6.6 103/166] io_uring: fix error pbuf checking

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Begunkov <asml.silence@gmail.com>

Commit bcc87d978b834c298bbdd9c52454c5d0a946e97e upstream.

Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent
error handling in io_alloc_pbuf_ring().

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341
Call Trace:
 <TASK>
 io_put_bl io_uring/kbuf.c:378 [inline]
 io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392
 io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613
 io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844
 process_one_work kernel/workqueue.c:3231 [inline]
 process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
 kthread+0x2f0/0x390 kernel/kthread.c:389
 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Cc: stable@vger.kernel.org
Reported-by: syzbot+2074b1a3d447915c6f1c@syzkaller.appspotmail.com
Fixes: 87585b05757dc ("io_uring/kbuf: use vm_insert_pages() for mmap'ed pbuf ring")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c5f9df20560bd9830401e8e48abc029e7cfd9f5e.1721329239.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 io_uring/kbuf.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/io_uring/kbuf.c
+++ b/io_uring/kbuf.c
@@ -510,8 +510,10 @@ static int io_alloc_pbuf_ring(struct io_
 	ring_size = reg->ring_entries * sizeof(struct io_uring_buf_ring);
 
 	bl->buf_ring = io_pages_map(&bl->buf_pages, &bl->buf_nr_pages, ring_size);
-	if (!bl->buf_ring)
+	if (IS_ERR(bl->buf_ring)) {
+		bl->buf_ring = NULL;
 		return -ENOMEM;
+	}
 	bl->is_mapped = 1;
 	bl->is_mmap = 1;
 	return 0;

[PATCH 6.6 104/166] Input: ads7846 - fix gpiod allocation

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H. Nikolaus Schaller <hns@goldelico.com>

commit c9ccb88f534ca760d06590b67571c353a2f0cbcd upstream.

commit 767d83361aaa ("Input: ads7846 - Convert to use software nodes")

has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.

Fixes: 767d83361aaa ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/ads7846.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -995,7 +995,7 @@ static int ads7846_setup_pendown(struct
 	if (pdata->get_pendown_state) {
 		ts->get_pendown_state = pdata->get_pendown_state;
 	} else {
-		ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN);
+		ts->gpio_pendown = devm_gpiod_get(&spi->dev, "pendown", GPIOD_IN);
 		if (IS_ERR(ts->gpio_pendown)) {
 			dev_err(&spi->dev, "failed to request pendown GPIO\n");
 			return PTR_ERR(ts->gpio_pendown);

[PATCH 6.6 105/166] Input: iqs7222 - preserve system status register

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff LaBundy <jeff@labundy.com>

commit a2add513311b48cc924a699a8174db2c61ed5e8a upstream.

Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).

In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.

Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.

Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.

As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.

Fixes: 2e70ef525b73 ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/misc/iqs7222.c |   50 ++++++++++++++++++-------------------------
 1 file changed, 22 insertions(+), 28 deletions(-)

--- a/drivers/input/misc/iqs7222.c
+++ b/drivers/input/misc/iqs7222.c
@@ -100,11 +100,11 @@ enum iqs7222_reg_key_id {
 
 enum iqs7222_reg_grp_id {
 	IQS7222_REG_GRP_STAT,
-	IQS7222_REG_GRP_FILT,
 	IQS7222_REG_GRP_CYCLE,
 	IQS7222_REG_GRP_GLBL,
 	IQS7222_REG_GRP_BTN,
 	IQS7222_REG_GRP_CHAN,
+	IQS7222_REG_GRP_FILT,
 	IQS7222_REG_GRP_SLDR,
 	IQS7222_REG_GRP_TPAD,
 	IQS7222_REG_GRP_GPIO,
@@ -286,6 +286,7 @@ static const struct iqs7222_event_desc i
 
 struct iqs7222_reg_grp_desc {
 	u16 base;
+	u16 val_len;
 	int num_row;
 	int num_col;
 };
@@ -342,6 +343,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAC00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -400,6 +402,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAC00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -454,6 +457,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xC400,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -496,6 +500,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xC400,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -543,6 +548,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAA00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -600,6 +606,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAA00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -656,6 +663,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAE00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -712,6 +720,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAE00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -768,6 +777,7 @@ static const struct iqs7222_dev_desc iqs
 			},
 			[IQS7222_REG_GRP_FILT] = {
 				.base = 0xAE00,
+				.val_len = 3,
 				.num_row = 1,
 				.num_col = 2,
 			},
@@ -1604,7 +1614,7 @@ static int iqs7222_force_comms(struct iq
 }
 
 static int iqs7222_read_burst(struct iqs7222_private *iqs7222,
-			      u16 reg, void *val, u16 num_val)
+			      u16 reg, void *val, u16 val_len)
 {
 	u8 reg_buf[sizeof(__be16)];
 	int ret, i;
@@ -1619,7 +1629,7 @@ static int iqs7222_read_burst(struct iqs
 		{
 			.addr = client->addr,
 			.flags = I2C_M_RD,
-			.len = num_val * sizeof(__le16),
+			.len = val_len,
 			.buf = (u8 *)val,
 		},
 	};
@@ -1675,7 +1685,7 @@ static int iqs7222_read_word(struct iqs7
 	__le16 val_buf;
 	int error;
 
-	error = iqs7222_read_burst(iqs7222, reg, &val_buf, 1);
+	error = iqs7222_read_burst(iqs7222, reg, &val_buf, sizeof(val_buf));
 	if (error)
 		return error;
 
@@ -1685,10 +1695,9 @@ static int iqs7222_read_word(struct iqs7
 }
 
 static int iqs7222_write_burst(struct iqs7222_private *iqs7222,
-			       u16 reg, const void *val, u16 num_val)
+			       u16 reg, const void *val, u16 val_len)
 {
 	int reg_len = reg > U8_MAX ? sizeof(reg) : sizeof(u8);
-	int val_len = num_val * sizeof(__le16);
 	int msg_len = reg_len + val_len;
 	int ret, i;
 	struct i2c_client *client = iqs7222->client;
@@ -1747,7 +1756,7 @@ static int iqs7222_write_word(struct iqs
 {
 	__le16 val_buf = cpu_to_le16(val);
 
-	return iqs7222_write_burst(iqs7222, reg, &val_buf, 1);
+	return iqs7222_write_burst(iqs7222, reg, &val_buf, sizeof(val_buf));
 }
 
 static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222)
@@ -1831,30 +1840,14 @@ static int iqs7222_dev_init(struct iqs72
 
 	/*
 	 * Acknowledge reset before writing any registers in case the device
-	 * suffers a spurious reset during initialization. Because this step
-	 * may change the reserved fields of the second filter beta register,
-	 * its cache must be updated.
-	 *
-	 * Writing the second filter beta register, in turn, may clobber the
-	 * system status register. As such, the filter beta register pair is
-	 * written first to protect against this hazard.
+	 * suffers a spurious reset during initialization.
 	 */
 	if (dir == WRITE) {
-		u16 reg = dev_desc->reg_grps[IQS7222_REG_GRP_FILT].base + 1;
-		u16 filt_setup;
-
 		error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
 					   iqs7222->sys_setup[0] |
 					   IQS7222_SYS_SETUP_ACK_RESET);
 		if (error)
 			return error;
-
-		error = iqs7222_read_word(iqs7222, reg, &filt_setup);
-		if (error)
-			return error;
-
-		iqs7222->filt_setup[1] &= GENMASK(7, 0);
-		iqs7222->filt_setup[1] |= (filt_setup & ~GENMASK(7, 0));
 	}
 
 	/*
@@ -1883,6 +1876,7 @@ static int iqs7222_dev_init(struct iqs72
 		int num_col = dev_desc->reg_grps[i].num_col;
 		u16 reg = dev_desc->reg_grps[i].base;
 		__le16 *val_buf;
+		u16 val_len = dev_desc->reg_grps[i].val_len ? : num_col * sizeof(*val_buf);
 		u16 *val;
 
 		if (!num_col)
@@ -1900,7 +1894,7 @@ static int iqs7222_dev_init(struct iqs72
 			switch (dir) {
 			case READ:
 				error = iqs7222_read_burst(iqs7222, reg,
-							   val_buf, num_col);
+							   val_buf, val_len);
 				for (k = 0; k < num_col; k++)
 					val[k] = le16_to_cpu(val_buf[k]);
 				break;
@@ -1909,7 +1903,7 @@ static int iqs7222_dev_init(struct iqs72
 				for (k = 0; k < num_col; k++)
 					val_buf[k] = cpu_to_le16(val[k]);
 				error = iqs7222_write_burst(iqs7222, reg,
-							    val_buf, num_col);
+							    val_buf, val_len);
 				break;
 
 			default:
@@ -1962,7 +1956,7 @@ static int iqs7222_dev_info(struct iqs72
 	int error, i;
 
 	error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, dev_id,
-				   ARRAY_SIZE(dev_id));
+				   sizeof(dev_id));
 	if (error)
 		return error;
 
@@ -2917,7 +2911,7 @@ static int iqs7222_report(struct iqs7222
 	__le16 status[IQS7222_MAX_COLS_STAT];
 
 	error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, status,
-				   num_stat);
+				   num_stat * sizeof(*status));
 	if (error)
 		return error;
 

[PATCH 6.6 106/166] Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nilton Perim Neto <niltonperimneto@gmail.com>

commit 36e093c8dcc585d0a9e79a005f721f01f3365eba upstream.

Add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE to the list of
recognized controllers, and update vendor comments to match.

Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Link: https://lore.kernel.org/r/20250122214814.102311-2-niltonperimneto@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -375,8 +375,10 @@ static const struct xpad_device {
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 },
 	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
+	{ 0x2e24, 0x1688, "Hyperkin X91 X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
@@ -388,6 +390,7 @@ static const struct xpad_device {
 	{ 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
 	{ 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE },
 	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
+	{ 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
@@ -526,12 +529,12 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA controllers */
 	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
 	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
-       XPAD_XBOXONE_VENDOR(0x294b),            /* Snakebyte */
+	XPAD_XBOXONE_VENDOR(0x294b),		/* Snakebyte */
 	XPAD_XBOX360_VENDOR(0x2c22),		/* Qanba Controllers */
-	XPAD_XBOX360_VENDOR(0x2dc8),            /* 8BitDo Pro 2 Wired Controller */
-	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
-	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke Xbox One pad */
-	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
+	XPAD_XBOX360_VENDOR(0x2dc8),		/* 8BitDo Controllers */
+	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Controllers */
+	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Controllers */
+	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	XPAD_XBOXONE_VENDOR(0x3285),		/* Nacon Evol-X */

[PATCH 6.6 107/166] Input: xpad - add multiple supported devices

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Rojtberg <rojtberg@gmail.com>

commit 3492321e2e60ddfe91aa438bb9ac209016f48f7a upstream.

This is based on multiple commits at https://github.com/paroj/xpad
that had bouncing email addresses and were not signed off.

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250123175404.23254-1-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -140,6 +140,7 @@ static const struct xpad_device {
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+	{ 0x044f, 0xd01e, "ThrustMaster, Inc. ESWAP X 2 ELDEN RING EDITION", 0, XTYPE_XBOXONE },
 	{ 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
@@ -177,6 +178,7 @@ static const struct xpad_device {
 	{ 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
 	{ 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
 	{ 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+	{ 0x0738, 0x4503, "Mad Catz Racing Wheel", 0, XTYPE_XBOXONE },
 	{ 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
 	{ 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
@@ -238,6 +240,7 @@ static const struct xpad_device {
 	{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0e6f, 0x015d, "PDP Mirror's Edge Official Wired Controller for Xbox One", XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
 	{ 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
@@ -276,12 +279,15 @@ static const struct xpad_device {
 	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x0151, "Hori Racing Wheel Overdrive for Xbox Series X", 0, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x0152, "Hori Racing Wheel Overdrive for Xbox Series X", 0, XTYPE_XBOXONE },
 	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
 	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
 	{ 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 },
+	{ 0x10f5, 0x7005, "Turtle Beach Recon Controller", 0, XTYPE_XBOXONE },
 	{ 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
 	{ 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 },
 	{ 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 },
@@ -365,6 +371,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+	{ 0x24c6, 0x581a, "ThrustMaster XB1 Classic Controller", 0, XTYPE_XBOXONE },
 	{ 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
@@ -375,10 +382,12 @@ static const struct xpad_device {
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
-	{ 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x3109, "8BitDo Ultimate Wireless Bluetooth", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x310a, "8BitDo Ultimate 2C Wireless Controller", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x6001, "8BitDo SN30 Pro", 0, XTYPE_XBOX360 },
 	{ 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x2e24, 0x1688, "Hyperkin X91 X-Box One pad", 0, XTYPE_XBOXONE },
+	{ 0x2e95, 0x0504, "SCUF Gaming Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
 	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
@@ -386,12 +395,16 @@ static const struct xpad_device {
 	{ 0x31e3, 0x1230, "Wooting Two HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0603, "Nacon Pro Compact controller for Xbox", 0, XTYPE_XBOXONE },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
+	{ 0x3285, 0x0614, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
 	{ 0x3285, 0x0646, "Nacon Pro Compact", 0, XTYPE_XBOXONE },
+	{ 0x3285, 0x0662, "Nacon Revolution5 Pro", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE },
 	{ 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 },
 	{ 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
+	{ 0x413d, 0x2104, "Black Shark Green Ghost Gamepad", 0, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
 };
@@ -490,6 +503,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x03f0),		/* HP HyperX Xbox 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x03f0),		/* HP HyperX Xbox One controllers */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster Xbox 360 controllers */
+	XPAD_XBOXONE_VENDOR(0x044f),		/* Thrustmaster Xbox One controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft Xbox 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft Xbox One controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech Xbox 360-style controllers */
@@ -535,11 +549,13 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Controllers */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Controllers */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOXONE_VENDOR(0x2e95),		/* SCUF Gaming Controller */
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	XPAD_XBOXONE_VENDOR(0x3285),		/* Nacon Evol-X */
 	XPAD_XBOX360_VENDOR(0x3537),		/* GameSir Controllers */
 	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x413d),		/* Black Shark Green Ghost Controller */
 	{ }
 };
 
@@ -692,7 +708,9 @@ static const struct xboxone_init_packet
 	XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
 	XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_led_on),
+	XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_led_on),
 	XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_auth),
+	XBOXONE_INIT_PKT(0x20d6, 0xa01a, xboxone_pdp_auth),
 	XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init),
 	XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init),

[PATCH 6.6 108/166] Input: xpad - add support for ZOTAC Gaming Zone

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antheas Kapenekakis <lkml@antheas.dev>

commit 709329c48214ad2acf12eed1b5c0eb798e40a64c upstream.

ZOTAC Gaming Zone is ZOTAC's 2024 handheld release. As it is common
with these handhelds, it uses a hybrid USB device with an xpad
endpoint, a keyboard endpoint, and a vendor-specific endpoint for
RGB control et al.

Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-2-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -349,6 +349,7 @@ static const struct xpad_device {
 	{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
+	{ 0x1ee9, 0x1590, "ZOTAC Gaming Zone", 0, XTYPE_XBOX360 },
 	{ 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE },
 	{ 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE },
 	{ 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 },
@@ -537,6 +538,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1a86),		/* QH Electronics */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
+	XPAD_XBOX360_VENDOR(0x1ee9),		/* ZOTAC Technology Limited */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
 	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA controllers */
 	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA controllers */

[PATCH 6.6 109/166] Input: xpad - add support for TECNO Pocket Go

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antheas Kapenekakis <lkml@antheas.dev>

commit 95a54a96f657fd069d2a9922b6c2d293a72a001f upstream.

TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile.
It poses a unique feature: it does not have a display. Instead, the
handheld is essentially a pc in a controller. As customary, it has an
xpad endpoint, a keyboard endpoint, and a vendor endpoint for its
vendor software.

Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -381,6 +381,7 @@ static const struct xpad_device {
 	{ 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 },
 	{ 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE },
 	{ 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE },
+	{ 0x2993, 0x2001, "TECNO Pocket Go", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
 	{ 0x2dc8, 0x3106, "8BitDo Ultimate Wireless / Pro 2 Wired Controller", 0, XTYPE_XBOX360 },
 	{ 0x2dc8, 0x3109, "8BitDo Ultimate Wireless Bluetooth", 0, XTYPE_XBOX360 },
@@ -546,6 +547,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
 	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
 	XPAD_XBOXONE_VENDOR(0x294b),		/* Snakebyte */
+	XPAD_XBOX360_VENDOR(0x2993),		/* TECNO Mobile */
 	XPAD_XBOX360_VENDOR(0x2c22),		/* Qanba Controllers */
 	XPAD_XBOX360_VENDOR(0x2dc8),		/* 8BitDo Controllers */
 	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Controllers */

[PATCH 6.6 110/166] Input: xpad - rename QH controller to Legion Go S

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antheas Kapenekakis <lkml@antheas.dev>

commit 659a7614dd72e2835ac0b220c2fa68fabd8d1df9 upstream.

The QH controller is actually the controller of the Legion Go S, with
the manufacturer string wch.cn and product name Legion Go S in its
USB descriptor. A cursory lookup of the VID reveals the same.

Therefore, rename the xpad entries to match.

Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -312,7 +312,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
-	{ 0x1a86, 0xe310, "QH Electronics Controller", 0, XTYPE_XBOX360 },
+	{ 0x1a86, 0xe310, "Legion Go S", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -537,7 +537,7 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
 	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
-	XPAD_XBOX360_VENDOR(0x1a86),		/* QH Electronics */
+	XPAD_XBOX360_VENDOR(0x1a86),		/* Nanjing Qinheng Microelectronics (WCH) */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
 	XPAD_XBOX360_VENDOR(0x1ee9),		/* ZOTAC Technology Limited */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */

[PATCH 6.6 111/166] Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Werner Sembach <wse@tuxedocomputers.com>

commit 729d163232971672d0f41b93c02092fb91f0e758 upstream.

Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.

With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.

Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/serio/i8042-acpipnpio.h |   10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1209,18 +1209,10 @@ static const struct dmi_system_id i8042_
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
 	{
-		/*
-		 * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
-		 * the keyboard very laggy for ~5 seconds after boot and
-		 * sometimes also after resume.
-		 * However both are required for the keyboard to not fail
-		 * completely sometimes after boot or resume.
-		 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NHxxRZQ"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

[PATCH 6.6 112/166] Input: i8042 - add required quirks for missing old boardnames

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Werner Sembach <wse@tuxedocomputers.com>

commit 9ed468e17d5b80e7116fd35842df3648e808ae47 upstream.

Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.

The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.

Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/serio/i8042-acpipnpio.h |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1261,6 +1261,12 @@ static const struct dmi_system_id i8042_
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
 	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "P640RE"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
 		/*
 		 * This is only a partial board_name and might be followed by
 		 * another letter or number. DMI_MATCH however does do partial
@@ -1337,11 +1343,35 @@ static const struct dmi_system_id i8042_
 	},
 	{
 		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB51RF"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PB71RD"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PC70DR"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
+	{
+		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"),
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX_GN20"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
+	},
 	/* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */
 	{
 		.matches = {

[PATCH 6.6 113/166] Input: i8042 - swap old quirk combination with new quirk for several devices

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Werner Sembach <wse@tuxedocomputers.com>

commit 75ee4ebebbbe8dc4b55ba37f388924fa96bf1564 upstream.

Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.

While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.

Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/serio/i8042-acpipnpio.h |   40 +++++++++++-----------------------
 1 file changed, 14 insertions(+), 26 deletions(-)

--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1080,16 +1080,14 @@ static const struct dmi_system_id i8042_
 			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
 			DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
 			DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/* Mivvy M310 */
@@ -1171,8 +1169,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1205,8 +1202,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1218,8 +1214,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	/*
 	 * At least one modern Clevo barebone has the touchpad connected both
@@ -1235,17 +1230,15 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
-					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
-					SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX |
+					SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
-					SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
-					SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX |
+					SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1319,8 +1312,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RS"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*
@@ -1338,8 +1330,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1363,8 +1354,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1383,15 +1373,13 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*

[PATCH 6.6 114/166] Input: i8042 - swap old quirk combination with new quirk for more devices

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Werner Sembach <wse@tuxedocomputers.com>

commit d85862ccca452eeb19329e9f4f9a6ce1d1e53561 upstream.

Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.

We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.

Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/serio/i8042-acpipnpio.h |   31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1157,9 +1157,7 @@ static const struct dmi_system_id i8042_
 	},
 	/*
 	 * A lot of modern Clevo barebones have touchpad and/or keyboard issues
-	 * after suspend fixable with nomux + reset + noloop + nopnp. Luckily,
-	 * none of them have an external PS/2 port so this can safely be set for
-	 * all of them.
+	 * after suspend fixable with the forcenorestore quirk.
 	 * Clevo barebones come with board_vendor and/or system_vendor set to
 	 * either the very generic string "Notebook" and/or a different value
 	 * for each individual reseller. The only somewhat universal way to
@@ -1175,22 +1173,19 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "N140CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "N141CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1250,8 +1245,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1268,16 +1262,14 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/* Clevo P650RS, 650RP6, Sager NP8152-S, and others */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*
@@ -1288,8 +1280,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*
@@ -1300,8 +1291,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		/*
@@ -1323,8 +1313,7 @@ static const struct dmi_system_id i8042_
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {

[PATCH 6.6 115/166] USB: serial: ftdi_sio: add support for Altera USB Blaster 3

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boon Khai Ng <boon.khai.ng@intel.com>

commit 18e0885bd2ca738407036434418a26a58394a60e upstream.

The Altera USB Blaster 3, available as both a cable and an on-board
solution, is primarily used for programming and debugging FPGAs.

It interfaces with host software such as Quartus Programmer,
System Console, SignalTap, and Nios Debugger. The device utilizes
either an FT2232 or FT4232 chip.

Enabling the support for various configurations of the on-board
USB Blaster 3 by including the appropriate VID/PID pairs,
allowing it to function as a serial device via ftdi_sio.

Note that this check-in does not include support for the
cable solution, as it does not support UART functionality.
The supported configurations are determined by the
hardware design and include:

1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART
2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART
3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART
4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART
5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART
6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART
7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART
8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART

These configurations allow for flexibility in how the USB Blaster 3 is
used, depending on the specific needs of the hardware design.

Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     |   14 ++++++++++++++
 drivers/usb/serial/ftdi_sio_ids.h |   13 +++++++++++++
 2 files changed, 27 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1079,6 +1079,20 @@ static const struct usb_device_id id_tab
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	/* GMC devices */
 	{ USB_DEVICE(GMC_VID, GMC_Z216C_PID) },
+	/* Altera USB Blaster 3 */
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6022_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6025_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6026_PID, 3) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_6029_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602A_PID, 3) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602C_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602D_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 2) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ALTERA_VID, ALTERA_UB3_602E_PID, 3) },
 	{ }					/* Terminating entry */
 };
 
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1612,3 +1612,16 @@
  */
 #define GMC_VID				0x1cd7
 #define GMC_Z216C_PID			0x0217 /* GMC Z216C Adapter IR-USB */
+
+/*
+ *  Altera USB Blaster 3 (http://www.altera.com).
+ */
+#define ALTERA_VID			0x09fb
+#define ALTERA_UB3_6022_PID		0x6022
+#define ALTERA_UB3_6025_PID		0x6025
+#define ALTERA_UB3_6026_PID		0x6026
+#define ALTERA_UB3_6029_PID		0x6029
+#define ALTERA_UB3_602A_PID		0x602a
+#define ALTERA_UB3_602C_PID		0x602c
+#define ALTERA_UB3_602D_PID		0x602d
+#define ALTERA_UB3_602E_PID		0x602e

[PATCH 6.6 116/166] USB: serial: option: add Telit Cinterion FE990B compositions

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Porcedda <fabio.porcedda@gmail.com>

commit 4981bb50392b7515b765da28cf8768ce624c2670 upstream.

Add the following Telit Cinterion FE990B40 compositions:

0x10b0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
        tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10b0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=28c2595e
C:  #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10b1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
        tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10b1 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=28c2595e
C:  #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10b2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
        tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10b2 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=28c2595e
C:  #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10b3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
        tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 11 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10b3 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE990
S:  SerialNumber=28c2595e
C:  #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
[ johan: use USB_DEVICE_AND_INTERFACE_INFO() and sort by protocol ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1388,6 +1388,22 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10aa, 0xff),	/* Telit FN920C04 (MBIM) */
 	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x30),	/* Telit FE990B (rmnet) */
+	  .driver_info = NCTRL(5) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b0, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x30),	/* Telit FE990B (MBIM) */
+	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b1, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x30),	/* Telit FE990B (RNDIS) */
+	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b2, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x30),	/* Telit FE990B (ECM) */
+	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff),	/* Telit FE910C04 (rmnet) */

[PATCH 6.6 117/166] USB: serial: option: fix Telit Cinterion FE990A name

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Porcedda <fabio.porcedda@gmail.com>

commit 6232f0d8e100a26275bbd773fc56a60af2c95322 upstream.

The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1368,13 +1368,13 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff),	/* Telit FN990A (PCIe) */
 	  .driver_info = RSVD(0) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff),	/* Telit FE990 (rmnet) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff),	/* Telit FE990A (rmnet) */
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff),	/* Telit FE990 (MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff),	/* Telit FE990A (MBIM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff),	/* Telit FE990 (RNDIS) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff),	/* Telit FE990A (RNDIS) */
 	  .driver_info = NCTRL(2) | RSVD(3) },
-	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990 (ECM) */
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990A (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff),	/* Telit FN20C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },

[PATCH 6.6 118/166] USB: serial: option: match on interface class for Telit FN990B

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 9a665fe3d967fe46edb4fd2497c7a5cc2dac2f55 upstream.

The device id entries for Telit FN990B ended up matching only on the
interface protocol. While this works, the protocol is qualified by the
interface class (and subclass) which should have been included.

Switch to matching using USB_DEVICE_AND_INTERFACE_INFO() while keeping
the entries sorted also by protocol for consistency.

Link: https://lore.kernel.org/20250227110655.3647028-2-fabio.porcedda@gmail.com/
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1410,22 +1410,22 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(0) | NCTRL(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x60) },	/* Telit FN990B (rmnet) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d0, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30),	/* Telit FN990B (rmnet) */
 	  .driver_info = NCTRL(5) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x60) },	/* Telit FN990B (MBIM) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d1, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x60) },	/* Telit FN990B (RNDIS) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d2, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x30),	/* Telit FN990B (RNDIS) */
 	  .driver_info = NCTRL(6) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x60) },	/* Telit FN990B (ECM) */
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x40) },
-	{ USB_DEVICE_INTERFACE_PROTOCOL(TELIT_VENDOR_ID, 0x10d3, 0x30),
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d2, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x30),	/* Telit FN990B (ECM) */
 	  .driver_info = NCTRL(6) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

[PATCH 6.6 119/166] x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florent Revest <revest@chromium.org>

commit e3e89178a9f4a80092578af3ff3c8478f9187d59 upstream.

Currently, load_microcode_amd() iterates over all NUMA nodes, retrieves their
CPU masks and unconditionally accesses per-CPU data for the first CPU of each
mask.

According to Documentation/admin-guide/mm/numaperf.rst:

  "Some memory may share the same node as a CPU, and others are provided as
  memory only nodes."

Therefore, some node CPU masks may be empty and wouldn't have a "first CPU".

On a machine with far memory (and therefore CPU-less NUMA nodes):
- cpumask_of_node(nid) is 0
- cpumask_first(0) is CONFIG_NR_CPUS
- cpu_data(CONFIG_NR_CPUS) accesses the cpu_info per-CPU array at an
  index that is 1 out of bounds

This does not have any security implications since flashing microcode is
a privileged operation but I believe this has reliability implications by
potentially corrupting memory while flashing a microcode update.

When booting with CONFIG_UBSAN_BOUNDS=y on an AMD machine that flashes
a microcode update. I get the following splat:

  UBSAN: array-index-out-of-bounds in arch/x86/kernel/cpu/microcode/amd.c:X:Y
  index 512 is out of range for type 'unsigned long[512]'
  [...]
  Call Trace:
   dump_stack
   __ubsan_handle_out_of_bounds
   load_microcode_amd
   request_microcode_amd
   reload_store
   kernfs_fop_write_iter
   vfs_write
   ksys_write
   do_syscall_64
   entry_SYSCALL_64_after_hwframe

Change the loop to go over only NUMA nodes which have CPUs before determining
whether the first CPU on the respective node needs microcode update.

  [ bp: Massage commit message, fix typo. ]

Fixes: 7ff6edf4fef3 ("x86/microcode/AMD: Fix mixed steppings support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250310144243.861978-1-revest@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/microcode/amd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -1078,7 +1078,7 @@ static enum ucode_state load_microcode_a
 	if (ret != UCODE_OK)
 		return ret;
 
-	for_each_node(nid) {
+	for_each_node_with_cpus(nid) {
 		cpu = cpumask_first(cpumask_of_node(nid));
 		c = &cpu_data(cpu);
 

[PATCH 6.6 120/166] drm/i915/cdclk: Do cdclk post plane programming later

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit 6266f4a78131c795631440ea9c7b66cdfd399484 upstream.

We currently call intel_set_cdclk_post_plane_update() far
too early. When pipes are active during the reprogramming
the current spot only works for the cd2x divider update
case, as that is synchronize to the pipe's vblank. Squashing
and crawling are not synchronized in any way, so doing the
programming while the pipes/planes are potentially still using
the old hardware state could lead to underruns.

Move the post plane reprgramming to a spot where we know
that the pipes/planes have switched over the new hardware
state.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218211913.27867-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
(cherry picked from commit fb64f5568c0e0b5730733d70a012ae26b1a55815)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_display.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7097,9 +7097,6 @@ static void intel_atomic_commit_tail(str
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	dev_priv->display.funcs.display->commit_modeset_enables(state);
 
-	if (state->modeset)
-		intel_set_cdclk_post_plane_update(state);
-
 	intel_wait_for_vblank_workers(state);
 
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
@@ -7178,6 +7175,8 @@ static void intel_atomic_commit_tail(str
 		intel_verify_planes(state);
 
 	intel_sagv_post_plane_update(state);
+	if (state->modeset)
+		intel_set_cdclk_post_plane_update(state);
 	intel_pmdemand_post_plane_update(state);
 
 	drm_atomic_helper_commit_hw_done(&state->base);

[PATCH 6.6 121/166] drm/atomic: Filter out redundant DPMS calls

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

commit de93ddf88088f7624b589d0ff3af9effb87e8f3b upstream.

Video players (eg. mpv) do periodic XResetScreenSaver() calls to
keep the screen on while the video playing. The modesetting ddx
plumbs these straight through into the kernel as DPMS setproperty
ioctls, without any filtering whatsoever. When implemented via
atomic these end up as empty commits on the crtc (which will
nonetheless take one full frame), which leads to a dropped
frame every time XResetScreenSaver() is called.

Let's just filter out redundant DPMS property changes in the
kernel to avoid this issue.

v2: Explain the resulting commits a bit better (Sima)
    Document the behaviour in uapi docs (Sima)

Cc: stable@vger.kernel.org
Testcase: igt/kms_flip/flip-vs-dpms-on-nop
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250219160239.17502-1-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_atomic_uapi.c |    4 ++++
 drivers/gpu/drm/drm_connector.c   |    4 ++++
 2 files changed, 8 insertions(+)

--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -974,6 +974,10 @@ int drm_atomic_connector_commit_dpms(str
 
 	if (mode != DRM_MODE_DPMS_ON)
 		mode = DRM_MODE_DPMS_OFF;
+
+	if (connector->dpms == mode)
+		goto out;
+
 	connector->dpms = mode;
 
 	crtc = connector->state->crtc;
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1162,6 +1162,10 @@ static const u32 dp_colorspaces =
  * 	callback. For atomic drivers the remapping to the "ACTIVE" property is
  * 	implemented in the DRM core.
  *
+ * 	On atomic drivers any DPMS setproperty ioctl where the value does not
+ * 	change is completely skipped, otherwise a full atomic commit will occur.
+ * 	On legacy drivers the exact behavior is driver specific.
+ *
  * 	Note that this property cannot be set through the MODE_ATOMIC ioctl,
  * 	userspace must use "ACTIVE" on the CRTC instead.
  *

[PATCH 6.6 122/166] drm/dp_mst: Fix locking when skipping CSN before topology probing

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Imre Deak <imre.deak@intel.com>

commit 12d8f318347b1d4feac48e8ac351d3786af39599 upstream.

The handling of the MST Connection Status Notify message is skipped if
the probing of the topology is still pending. Acquiring the
drm_dp_mst_topology_mgr::probe_lock for this in
drm_dp_mst_handle_up_req() is problematic: the task/work this function
is called from is also responsible for handling MST down-request replies
(in drm_dp_mst_handle_down_rep()). Thus drm_dp_mst_link_probe_work() -
holding already probe_lock - could be blocked waiting for an MST
down-request reply while drm_dp_mst_handle_up_req() is waiting for
probe_lock while processing a CSN message. This leads to the probe
work's down-request message timing out.

A scenario similar to the above leading to a down-request timeout is
handling a CSN message in drm_dp_mst_handle_conn_stat(), holding the
probe_lock and sending down-request messages while a second CSN message
sent by the sink subsequently is handled by drm_dp_mst_handle_up_req().

Fix the above by moving the logic to skip the CSN handling to
drm_dp_mst_process_up_req(). This function is called from a work
(separate from the task/work handling new up/down messages), already
holding probe_lock. This solves the above timeout issue, since handling
of down-request replies won't be blocked by probe_lock.

Fixes: ddf983488c3e ("drm/dp_mst: Skip CSN if topology probing is not done yet")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org # v6.6+
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307183152.3822170-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/display/drm_dp_mst_topology.c |   40 +++++++++++++++-----------
 1 file changed, 24 insertions(+), 16 deletions(-)

--- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
@@ -3959,6 +3959,22 @@ out:
 	return 0;
 }
 
+static bool primary_mstb_probing_is_done(struct drm_dp_mst_topology_mgr *mgr)
+{
+	bool probing_done = false;
+
+	mutex_lock(&mgr->lock);
+
+	if (mgr->mst_primary && drm_dp_mst_topology_try_get_mstb(mgr->mst_primary)) {
+		probing_done = mgr->mst_primary->link_address_sent;
+		drm_dp_mst_topology_put_mstb(mgr->mst_primary);
+	}
+
+	mutex_unlock(&mgr->lock);
+
+	return probing_done;
+}
+
 static inline bool
 drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr,
 			  struct drm_dp_pending_up_req *up_req)
@@ -3989,8 +4005,12 @@ drm_dp_mst_process_up_req(struct drm_dp_
 
 	/* TODO: Add missing handler for DP_RESOURCE_STATUS_NOTIFY events */
 	if (msg->req_type == DP_CONNECTION_STATUS_NOTIFY) {
-		dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat);
-		hotplug = true;
+		if (!primary_mstb_probing_is_done(mgr)) {
+			drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it.\n");
+		} else {
+			dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat);
+			hotplug = true;
+		}
 	}
 
 	drm_dp_mst_topology_put_mstb(mstb);
@@ -4069,10 +4089,11 @@ static int drm_dp_mst_handle_up_req(stru
 	drm_dp_send_up_ack_reply(mgr, mst_primary, up_req->msg.req_type,
 				 false);
 
+	drm_dp_mst_topology_put_mstb(mst_primary);
+
 	if (up_req->msg.req_type == DP_CONNECTION_STATUS_NOTIFY) {
 		const struct drm_dp_connection_status_notify *conn_stat =
 			&up_req->msg.u.conn_stat;
-		bool handle_csn;
 
 		drm_dbg_kms(mgr->dev, "Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n",
 			    conn_stat->port_number,
@@ -4081,16 +4102,6 @@ static int drm_dp_mst_handle_up_req(stru
 			    conn_stat->message_capability_status,
 			    conn_stat->input_port,
 			    conn_stat->peer_device_type);
-
-		mutex_lock(&mgr->probe_lock);
-		handle_csn = mst_primary->link_address_sent;
-		mutex_unlock(&mgr->probe_lock);
-
-		if (!handle_csn) {
-			drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it.");
-			kfree(up_req);
-			goto out_put_primary;
-		}
 	} else if (up_req->msg.req_type == DP_RESOURCE_STATUS_NOTIFY) {
 		const struct drm_dp_resource_status_notify *res_stat =
 			&up_req->msg.u.resource_stat;
@@ -4105,9 +4116,6 @@ static int drm_dp_mst_handle_up_req(stru
 	list_add_tail(&up_req->next, &mgr->up_req_list);
 	mutex_unlock(&mgr->up_req_lock);
 	queue_work(system_long_wq, &mgr->up_req_work);
-
-out_put_primary:
-	drm_dp_mst_topology_put_mstb(mst_primary);
 out_clear_reply:
 	memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx));
 	return 0;

[PATCH 6.6 123/166] drm/amd/display: Disable unneeded hpd interrupts during dm_init

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Li <sunpeng.li@amd.com>

commit 40b8c14936bd2726354c856251f6baed9869e760 upstream.

[Why]

It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.

In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).

But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.

This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.

[How]

Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1ba19eb15f88e70782642ce2d934211269337b)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c |   64 ++++++++++++------
 1 file changed, 45 insertions(+), 19 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c
@@ -891,8 +891,16 @@ void amdgpu_dm_hpd_init(struct amdgpu_de
 	struct drm_device *dev = adev_to_drm(adev);
 	struct drm_connector *connector;
 	struct drm_connector_list_iter iter;
+	int irq_type;
 	int i;
 
+	/* First, clear all hpd and hpdrx interrupts */
+	for (i = DC_IRQ_SOURCE_HPD1; i <= DC_IRQ_SOURCE_HPD6RX; i++) {
+		if (!dc_interrupt_set(adev->dm.dc, i, false))
+			drm_err(dev, "Failed to clear hpd(rx) source=%d on init\n",
+				i);
+	}
+
 	drm_connector_list_iter_begin(dev, &iter);
 	drm_for_each_connector_iter(connector, &iter) {
 		struct amdgpu_dm_connector *amdgpu_dm_connector =
@@ -900,10 +908,31 @@ void amdgpu_dm_hpd_init(struct amdgpu_de
 
 		const struct dc_link *dc_link = amdgpu_dm_connector->dc_link;
 
+		/*
+		 * Get a base driver irq reference for hpd ints for the lifetime
+		 * of dm. Note that only hpd interrupt types are registered with
+		 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
+		 * hpd_rx isn't available. DM currently controls hpd_rx
+		 * explicitly with dc_interrupt_set()
+		 */
 		if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
-			dc_interrupt_set(adev->dm.dc,
-					dc_link->irq_source_hpd,
-					true);
+			irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
+			/*
+			 * TODO: There's a mismatch between mode_info.num_hpd
+			 * and what bios reports as the # of connectors with hpd
+			 * sources. Since the # of hpd source types registered
+			 * with base driver == mode_info.num_hpd, we have to
+			 * fallback to dc_interrupt_set for the remaining types.
+			 */
+			if (irq_type < adev->mode_info.num_hpd) {
+				if (amdgpu_irq_get(adev, &adev->hpd_irq, irq_type))
+					drm_err(dev, "DM_IRQ: Failed get HPD for source=%d)!\n",
+						dc_link->irq_source_hpd);
+			} else {
+				dc_interrupt_set(adev->dm.dc,
+						 dc_link->irq_source_hpd,
+						 true);
+			}
 		}
 
 		if (dc_link->irq_source_hpd_rx != DC_IRQ_SOURCE_INVALID) {
@@ -913,12 +942,6 @@ void amdgpu_dm_hpd_init(struct amdgpu_de
 		}
 	}
 	drm_connector_list_iter_end(&iter);
-
-	/* Update reference counts for HPDs */
-	for (i = DC_IRQ_SOURCE_HPD1; i <= adev->mode_info.num_hpd; i++) {
-		if (amdgpu_irq_get(adev, &adev->hpd_irq, i - DC_IRQ_SOURCE_HPD1))
-			drm_err(dev, "DM_IRQ: Failed get HPD for source=%d)!\n", i);
-	}
 }
 
 /**
@@ -934,7 +957,7 @@ void amdgpu_dm_hpd_fini(struct amdgpu_de
 	struct drm_device *dev = adev_to_drm(adev);
 	struct drm_connector *connector;
 	struct drm_connector_list_iter iter;
-	int i;
+	int irq_type;
 
 	drm_connector_list_iter_begin(dev, &iter);
 	drm_for_each_connector_iter(connector, &iter) {
@@ -943,9 +966,18 @@ void amdgpu_dm_hpd_fini(struct amdgpu_de
 		const struct dc_link *dc_link = amdgpu_dm_connector->dc_link;
 
 		if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
-			dc_interrupt_set(adev->dm.dc,
-					dc_link->irq_source_hpd,
-					false);
+			irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
+
+			/* TODO: See same TODO in amdgpu_dm_hpd_init() */
+			if (irq_type < adev->mode_info.num_hpd) {
+				if (amdgpu_irq_put(adev, &adev->hpd_irq, irq_type))
+					drm_err(dev, "DM_IRQ: Failed put HPD for source=%d!\n",
+						dc_link->irq_source_hpd);
+			} else {
+				dc_interrupt_set(adev->dm.dc,
+						 dc_link->irq_source_hpd,
+						 false);
+			}
 		}
 
 		if (dc_link->irq_source_hpd_rx != DC_IRQ_SOURCE_INVALID) {
@@ -955,10 +987,4 @@ void amdgpu_dm_hpd_fini(struct amdgpu_de
 		}
 	}
 	drm_connector_list_iter_end(&iter);
-
-	/* Update reference counts for HPDs */
-	for (i = DC_IRQ_SOURCE_HPD1; i <= adev->mode_info.num_hpd; i++) {
-		if (amdgpu_irq_put(adev, &adev->hpd_irq, i - DC_IRQ_SOURCE_HPD1))
-			drm_err(dev, "DM_IRQ: Failed put HPD for source=%d!\n", i);
-	}
 }

[PATCH 6.6 124/166] drm/amd/display: Restore correct backlight brightness after a GPU reset

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit 5760388d9681ac743038b846b9082b9023969551 upstream.

[Why]
GPU reset will attempt to restore cached state, but brightness doesn't
get restored. It will come back at 100% brightness, but userspace thinks
it's the previous value.

[How]
When running resume sequence if GPU is in reset restore brightness
to previous value.

Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e19e2b57b6bb640d68dfc7991e1e182922cf867)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -227,6 +227,10 @@ static int amdgpu_dm_atomic_check(struct
 static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector);
 static void handle_hpd_rx_irq(void *param);
 
+static void amdgpu_dm_backlight_set_level(struct amdgpu_display_manager *dm,
+					 int bl_idx,
+					 u32 user_brightness);
+
 static bool
 is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state,
 				 struct drm_crtc_state *new_crtc_state);
@@ -2879,6 +2883,12 @@ static int dm_resume(void *handle)
 
 		mutex_unlock(&dm->dc_lock);
 
+		/* set the backlight after a reset */
+		for (i = 0; i < dm->num_of_edps; i++) {
+			if (dm->backlight_dev[i])
+				amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]);
+		}
+
 		return 0;
 	}
 	/* Recreate dc_state - DC invalidates it when setting power state to S3. */

[PATCH 6.6 125/166] drm/amd/display: Assign normalized_pix_clk when color depth = 14

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Hung <alex.hung@amd.com>

commit 79e31396fdd7037c503e6add15af7cb00633ea92 upstream.

[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.

It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.

Also fixes the indentation in get_norm_pix_clk.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -2567,10 +2567,13 @@ static int get_norm_pix_clk(const struct
 			break;
 		case COLOR_DEPTH_121212:
 			normalized_pix_clk = (pix_clk * 36) / 24;
-		break;
+			break;
+		case COLOR_DEPTH_141414:
+			normalized_pix_clk = (pix_clk * 42) / 24;
+			break;
 		case COLOR_DEPTH_161616:
 			normalized_pix_clk = (pix_clk * 48) / 24;
-		break;
+			break;
 		default:
 			ASSERT(0);
 		break;

[PATCH 6.6 126/166] drm/amd/display: Fix slab-use-after-free on hdcp_work

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit e65e7bea220c3ce8c4c793b4ba35557f4994ab2b upstream.

[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.

[How]
Cancel the delayed work when destroying workqueue.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Fixes: da3fd7ac0bcf ("drm/amd/display: Update CP property based on HW query")
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -455,6 +455,7 @@ void hdcp_destroy(struct kobject *kobj,
 	for (i = 0; i < hdcp_work->max_link; i++) {
 		cancel_delayed_work_sync(&hdcp_work[i].callback_dwork);
 		cancel_delayed_work_sync(&hdcp_work[i].watchdog_timer_dwork);
+		cancel_delayed_work_sync(&hdcp_work[i].property_validate_dwork);
 	}
 
 	sysfs_remove_bin_file(kobj, &hdcp_work[0].attr);

[PATCH 6.6 127/166] ksmbd: fix use-after-free in ksmbd_free_work_struct

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit bb39ed47065455604729404729d9116868638d31 upstream.

->interim_entry of ksmbd_work could be deleted after oplock is freed.
We don't need to manage it with linked list. The interim request could be
immediately sent whenever a oplock break wait is needed.

Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/ksmbd_work.c |    3 ---
 fs/smb/server/ksmbd_work.h |    1 -
 fs/smb/server/oplock.c     |   37 +++++++++++++++----------------------
 fs/smb/server/oplock.h     |    1 -
 4 files changed, 15 insertions(+), 27 deletions(-)

--- a/fs/smb/server/ksmbd_work.c
+++ b/fs/smb/server/ksmbd_work.c
@@ -26,7 +26,6 @@ struct ksmbd_work *ksmbd_alloc_work_stru
 		INIT_LIST_HEAD(&work->request_entry);
 		INIT_LIST_HEAD(&work->async_request_entry);
 		INIT_LIST_HEAD(&work->fp_entry);
-		INIT_LIST_HEAD(&work->interim_entry);
 		INIT_LIST_HEAD(&work->aux_read_list);
 		work->iov_alloc_cnt = 4;
 		work->iov = kcalloc(work->iov_alloc_cnt, sizeof(struct kvec),
@@ -56,8 +55,6 @@ void ksmbd_free_work_struct(struct ksmbd
 	kfree(work->tr_buf);
 	kvfree(work->request_buf);
 	kfree(work->iov);
-	if (!list_empty(&work->interim_entry))
-		list_del(&work->interim_entry);
 
 	if (work->async_id)
 		ksmbd_release_id(&work->conn->async_ida, work->async_id);
--- a/fs/smb/server/ksmbd_work.h
+++ b/fs/smb/server/ksmbd_work.h
@@ -89,7 +89,6 @@ struct ksmbd_work {
 	/* List head at conn->async_requests */
 	struct list_head                async_request_entry;
 	struct list_head                fp_entry;
-	struct list_head                interim_entry;
 };
 
 /**
--- a/fs/smb/server/oplock.c
+++ b/fs/smb/server/oplock.c
@@ -46,7 +46,6 @@ static struct oplock_info *alloc_opinfo(
 	opinfo->fid = id;
 	opinfo->Tid = Tid;
 	INIT_LIST_HEAD(&opinfo->op_entry);
-	INIT_LIST_HEAD(&opinfo->interim_list);
 	init_waitqueue_head(&opinfo->oplock_q);
 	init_waitqueue_head(&opinfo->oplock_brk);
 	atomic_set(&opinfo->refcount, 1);
@@ -803,7 +802,6 @@ out:
 static int smb2_lease_break_noti(struct oplock_info *opinfo)
 {
 	struct ksmbd_conn *conn = opinfo->conn;
-	struct list_head *tmp, *t;
 	struct ksmbd_work *work;
 	struct lease_break_info *br_info;
 	struct lease *lease = opinfo->o_lease;
@@ -831,16 +829,6 @@ static int smb2_lease_break_noti(struct
 	work->sess = opinfo->sess;
 
 	if (opinfo->op_state == OPLOCK_ACK_WAIT) {
-		list_for_each_safe(tmp, t, &opinfo->interim_list) {
-			struct ksmbd_work *in_work;
-
-			in_work = list_entry(tmp, struct ksmbd_work,
-					     interim_entry);
-			setup_async_work(in_work, NULL, NULL);
-			smb2_send_interim_resp(in_work, STATUS_PENDING);
-			list_del_init(&in_work->interim_entry);
-			release_async_work(in_work);
-		}
 		INIT_WORK(&work->work, __smb2_lease_break_noti);
 		ksmbd_queue_work(work);
 		wait_for_break_ack(opinfo);
@@ -871,7 +859,8 @@ static void wait_lease_breaking(struct o
 	}
 }
 
-static int oplock_break(struct oplock_info *brk_opinfo, int req_op_level)
+static int oplock_break(struct oplock_info *brk_opinfo, int req_op_level,
+			struct ksmbd_work *in_work)
 {
 	int err = 0;
 
@@ -914,9 +903,15 @@ static int oplock_break(struct oplock_in
 		}
 
 		if (lease->state & (SMB2_LEASE_WRITE_CACHING_LE |
-				SMB2_LEASE_HANDLE_CACHING_LE))
+				SMB2_LEASE_HANDLE_CACHING_LE)) {
+			if (in_work) {
+				setup_async_work(in_work, NULL, NULL);
+				smb2_send_interim_resp(in_work, STATUS_PENDING);
+				release_async_work(in_work);
+			}
+
 			brk_opinfo->op_state = OPLOCK_ACK_WAIT;
-		else
+		} else
 			atomic_dec(&brk_opinfo->breaking_cnt);
 	} else {
 		err = oplock_break_pending(brk_opinfo, req_op_level);
@@ -1116,7 +1111,7 @@ void smb_send_parent_lease_break_noti(st
 			if (ksmbd_conn_releasing(opinfo->conn))
 				continue;
 
-			oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE);
+			oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE, NULL);
 			opinfo_put(opinfo);
 		}
 	}
@@ -1152,7 +1147,7 @@ void smb_lazy_parent_lease_break_close(s
 
 			if (ksmbd_conn_releasing(opinfo->conn))
 				continue;
-			oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE);
+			oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE, NULL);
 			opinfo_put(opinfo);
 		}
 	}
@@ -1252,8 +1247,7 @@ int smb_grant_oplock(struct ksmbd_work *
 		goto op_break_not_needed;
 	}
 
-	list_add(&work->interim_entry, &prev_opinfo->interim_list);
-	err = oplock_break(prev_opinfo, SMB2_OPLOCK_LEVEL_II);
+	err = oplock_break(prev_opinfo, SMB2_OPLOCK_LEVEL_II, work);
 	opinfo_put(prev_opinfo);
 	if (err == -ENOENT)
 		goto set_lev;
@@ -1322,8 +1316,7 @@ static void smb_break_all_write_oplock(s
 	}
 
 	brk_opinfo->open_trunc = is_trunc;
-	list_add(&work->interim_entry, &brk_opinfo->interim_list);
-	oplock_break(brk_opinfo, SMB2_OPLOCK_LEVEL_II);
+	oplock_break(brk_opinfo, SMB2_OPLOCK_LEVEL_II, work);
 	opinfo_put(brk_opinfo);
 }
 
@@ -1386,7 +1379,7 @@ void smb_break_all_levII_oplock(struct k
 			    SMB2_LEASE_KEY_SIZE))
 			goto next;
 		brk_op->open_trunc = is_trunc;
-		oplock_break(brk_op, SMB2_OPLOCK_LEVEL_NONE);
+		oplock_break(brk_op, SMB2_OPLOCK_LEVEL_NONE, NULL);
 next:
 		opinfo_put(brk_op);
 		rcu_read_lock();
--- a/fs/smb/server/oplock.h
+++ b/fs/smb/server/oplock.h
@@ -74,7 +74,6 @@ struct oplock_info {
 	bool			is_lease;
 	bool			open_trunc;	/* truncate on open */
 	struct lease		*o_lease;
-	struct list_head        interim_list;
 	struct list_head        op_entry;
 	struct list_head        lease_entry;
 	wait_queue_head_t oplock_q; /* Other server threads */

[PATCH 6.6 128/166] ksmbd: prevent connection release during oplock break notification

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit 3aa660c059240e0c795217182cf7df32909dd917 upstream.

ksmbd_work could be freed when after connection release.
Increment r_count of ksmbd_conn to indicate that requests
are not finished yet and to not release the connection.

Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/connection.c |   20 ++++++++++++++++++++
 fs/smb/server/connection.h |    2 ++
 fs/smb/server/oplock.c     |    6 ++++++
 fs/smb/server/server.c     |   14 ++------------
 4 files changed, 30 insertions(+), 12 deletions(-)

--- a/fs/smb/server/connection.c
+++ b/fs/smb/server/connection.c
@@ -432,6 +432,26 @@ void ksmbd_conn_init_server_callbacks(st
 	default_conn_ops.terminate_fn = ops->terminate_fn;
 }
 
+void ksmbd_conn_r_count_inc(struct ksmbd_conn *conn)
+{
+	atomic_inc(&conn->r_count);
+}
+
+void ksmbd_conn_r_count_dec(struct ksmbd_conn *conn)
+{
+	/*
+	 * Checking waitqueue to dropping pending requests on
+	 * disconnection. waitqueue_active is safe because it
+	 * uses atomic operation for condition.
+	 */
+	atomic_inc(&conn->refcnt);
+	if (!atomic_dec_return(&conn->r_count) && waitqueue_active(&conn->r_count_q))
+		wake_up(&conn->r_count_q);
+
+	if (atomic_dec_and_test(&conn->refcnt))
+		kfree(conn);
+}
+
 int ksmbd_conn_transport_init(void)
 {
 	int ret;
--- a/fs/smb/server/connection.h
+++ b/fs/smb/server/connection.h
@@ -168,6 +168,8 @@ int ksmbd_conn_transport_init(void);
 void ksmbd_conn_transport_destroy(void);
 void ksmbd_conn_lock(struct ksmbd_conn *conn);
 void ksmbd_conn_unlock(struct ksmbd_conn *conn);
+void ksmbd_conn_r_count_inc(struct ksmbd_conn *conn);
+void ksmbd_conn_r_count_dec(struct ksmbd_conn *conn);
 
 /*
  * WARNING
--- a/fs/smb/server/oplock.c
+++ b/fs/smb/server/oplock.c
@@ -634,6 +634,7 @@ static void __smb2_oplock_break_noti(str
 {
 	struct smb2_oplock_break *rsp = NULL;
 	struct ksmbd_work *work = container_of(wk, struct ksmbd_work, work);
+	struct ksmbd_conn *conn = work->conn;
 	struct oplock_break_info *br_info = work->request_buf;
 	struct smb2_hdr *rsp_hdr;
 	struct ksmbd_file *fp;
@@ -689,6 +690,7 @@ static void __smb2_oplock_break_noti(str
 
 out:
 	ksmbd_free_work_struct(work);
+	ksmbd_conn_r_count_dec(conn);
 }
 
 /**
@@ -723,6 +725,7 @@ static int smb2_oplock_break_noti(struct
 	work->sess = opinfo->sess;
 
 	if (opinfo->op_state == OPLOCK_ACK_WAIT) {
+		ksmbd_conn_r_count_inc(conn);
 		INIT_WORK(&work->work, __smb2_oplock_break_noti);
 		ksmbd_queue_work(work);
 
@@ -744,6 +747,7 @@ static void __smb2_lease_break_noti(stru
 {
 	struct smb2_lease_break *rsp = NULL;
 	struct ksmbd_work *work = container_of(wk, struct ksmbd_work, work);
+	struct ksmbd_conn *conn = work->conn;
 	struct lease_break_info *br_info = work->request_buf;
 	struct smb2_hdr *rsp_hdr;
 
@@ -790,6 +794,7 @@ static void __smb2_lease_break_noti(stru
 
 out:
 	ksmbd_free_work_struct(work);
+	ksmbd_conn_r_count_dec(conn);
 }
 
 /**
@@ -829,6 +834,7 @@ static int smb2_lease_break_noti(struct
 	work->sess = opinfo->sess;
 
 	if (opinfo->op_state == OPLOCK_ACK_WAIT) {
+		ksmbd_conn_r_count_inc(conn);
 		INIT_WORK(&work->work, __smb2_lease_break_noti);
 		ksmbd_queue_work(work);
 		wait_for_break_ack(opinfo);
--- a/fs/smb/server/server.c
+++ b/fs/smb/server/server.c
@@ -270,17 +270,7 @@ static void handle_ksmbd_work(struct wor
 
 	ksmbd_conn_try_dequeue_request(work);
 	ksmbd_free_work_struct(work);
-	/*
-	 * Checking waitqueue to dropping pending requests on
-	 * disconnection. waitqueue_active is safe because it
-	 * uses atomic operation for condition.
-	 */
-	atomic_inc(&conn->refcnt);
-	if (!atomic_dec_return(&conn->r_count) && waitqueue_active(&conn->r_count_q))
-		wake_up(&conn->r_count_q);
-
-	if (atomic_dec_and_test(&conn->refcnt))
-		kfree(conn);
+	ksmbd_conn_r_count_dec(conn);
 }
 
 /**
@@ -310,7 +300,7 @@ static int queue_ksmbd_work(struct ksmbd
 	conn->request_buf = NULL;
 
 	ksmbd_conn_enqueue_request(work);
-	atomic_inc(&conn->r_count);
+	ksmbd_conn_r_count_inc(conn);
 	/* update activity on connection */
 	conn->last_active = jiffies;
 	INIT_WORK(&work->work, handle_ksmbd_work);

[PATCH 6.6 129/166] clk: samsung: update PLL locktime for PLL142XX used on FSD platform

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Varada Pavani <v.pavani@samsung.com>

commit 53517a70873c7a91675f7244768aad5006cc45de upstream.

Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence
update PLL142XX controller locktime to 150.

Cc: stable@vger.kernel.org
Fixes: 4f346005aaed ("clk: samsung: fsd: Add initial clock support")
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250225131918.50925-3-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-pll.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -206,6 +206,7 @@ static const struct clk_ops samsung_pll3
  */
 /* Maximum lock time can be 270 * PDIV cycles */
 #define PLL35XX_LOCK_FACTOR	(270)
+#define PLL142XX_LOCK_FACTOR	(150)
 
 #define PLL35XX_MDIV_MASK       (0x3FF)
 #define PLL35XX_PDIV_MASK       (0x3F)
@@ -272,7 +273,11 @@ static int samsung_pll35xx_set_rate(stru
 	}
 
 	/* Set PLL lock time. */
-	writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR,
+	if (pll->type == pll_142xx)
+		writel_relaxed(rate->pdiv * PLL142XX_LOCK_FACTOR,
+			pll->lock_reg);
+	else
+		writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR,
 			pll->lock_reg);
 
 	/* Change PLL PMS values */

[PATCH 6.6 130/166] ASoC: amd: yc: Support mic on another Lenovo ThinkPad E16 Gen 2 model

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Mizrahi <thomasmizra@gmail.com>

commit 0704a15b930cf97073ce091a0cd7ad32f2304329 upstream.

The internal microphone on the Lenovo ThinkPad E16 model requires a
quirk entry to work properly. This was fixed in a previous patch (linked
below), but depending on the specific variant of the model, the product
name may be "21M5" or "21M6".

The following patch fixed this issue for the 21M5 variant:
  https://lore.kernel.org/all/20240725065442.9293-1-tiwai@suse.de/

This patch adds support for the microphone on the 21M6 variant.

Link: https://github.com/ramaureirac/thinkpad-e14-linux/issues/31
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Mizrahi <thomasmizra@gmail.com>
Link: https://patch.msgid.link/20250308041303.198765-1-thomasmizra@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/amd/yc/acp6x-mach.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/sound/soc/amd/yc/acp6x-mach.c
+++ b/sound/soc/amd/yc/acp6x-mach.c
@@ -252,6 +252,13 @@ static const struct dmi_system_id yc_acp
 		.driver_data = &acp6x_card,
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21M6"),
+		}
+	},
+	{
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "21ME"),
 		}
 	},

[PATCH 6.6 131/166] dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kent Overstreet <kent.overstreet@linux.dev>

commit 57e9417f69839cb10f7ffca684c38acd28ceb57b upstream.

Fix memory corruption due to incorrect parameter being passed to bio_init

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# v6.5+
Fixes: 1d9a94389853 ("dm flakey: clone pages on write bio before corrupting them")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-flakey.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c
index 731467d4ed10..b690905ab89f 100644
--- a/drivers/md/dm-flakey.c
+++ b/drivers/md/dm-flakey.c
@@ -426,7 +426,7 @@ static struct bio *clone_bio(struct dm_target *ti, struct flakey_c *fc, struct b
 	if (!clone)
 		return NULL;
 
-	bio_init(clone, fc->dev->bdev, bio->bi_inline_vecs, nr_iovecs, bio->bi_opf);
+	bio_init(clone, fc->dev->bdev, clone->bi_inline_vecs, nr_iovecs, bio->bi_opf);
 
 	clone->bi_iter.bi_sector = flakey_map_sector(ti, bio->bi_iter.bi_sector);
 	clone->bi_private = bio;
-- 
2.48.1

[PATCH 6.6 132/166] arm64: mm: Populate vmemmap at the page level if not section aligned

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhenhua Huang <quic_zhenhuah@quicinc.com>

commit d4234d131b0a3f9e65973f1cdc71bb3560f5d14b upstream.

On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set
to 27, making one section 128M. The related page struct which vmemmap
points to is 2M then.
Commit c1cc1552616d ("arm64: MMU initialisation") optimizes the
vmemmap to populate at the PMD section level which was suitable
initially since hot plug granule is always one section(128M). However,
commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the
existing arm64 assumptions.

The first problem is that if start or end is not aligned to a section
boundary, such as when a subsection is hot added, populating the entire
section is wasteful.

The next problem is if we hotplug something that spans part of 128 MiB
section (subsections, let's call it memblock1), and then hotplug something
that spans another part of a 128 MiB section(subsections, let's call it
memblock2), and subsequently unplug memblock1, vmemmap_free() will clear
the entire PMD entry which also supports memblock2 even though memblock2
is still active.

Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the
fix similar to x86-64: populate to pages levels if start/end is not aligned
with section boundary.

Cc: stable@vger.kernel.org # v5.4+
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250304072700.3405036-1-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/mm/mmu.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1150,8 +1150,11 @@ int __meminit vmemmap_populate(unsigned
 		struct vmem_altmap *altmap)
 {
 	WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END));
+	/* [start, end] should be within one section */
+	WARN_ON_ONCE(end - start > PAGES_PER_SECTION * sizeof(struct page));
 
-	if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES))
+	if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES) ||
+	    (end - start < PAGES_PER_SECTION * sizeof(struct page)))
 		return vmemmap_populate_basepages(start, end, node, altmap);
 	else
 		return vmemmap_populate_hugepages(start, end, node, altmap);

[PATCH 6.6 133/166] qlcnic: fix memory leak issues in qlcnic_sriov_common.c

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haoxiang Li <haoxiang_li2024@163.com>

commit d2b9d97e89c79c95f8b517e4fa43fd100f936acc upstream.

Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.

Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -454,8 +454,10 @@ static int qlcnic_sriov_set_guest_vlan_m
 
 	num_vlans = sriov->num_allowed_vlans;
 	sriov->allowed_vlans = kcalloc(num_vlans, sizeof(u16), GFP_KERNEL);
-	if (!sriov->allowed_vlans)
+	if (!sriov->allowed_vlans) {
+		qlcnic_sriov_free_vlans(adapter);
 		return -ENOMEM;
+	}
 
 	vlans = (u16 *)&cmd->rsp.arg[3];
 	for (i = 0; i < num_vlans; i++)
@@ -2167,8 +2169,10 @@ int qlcnic_sriov_alloc_vlans(struct qlcn
 		vf = &sriov->vf_info[i];
 		vf->sriov_vlans = kcalloc(sriov->num_allowed_vlans,
 					  sizeof(*vf->sriov_vlans), GFP_KERNEL);
-		if (!vf->sriov_vlans)
+		if (!vf->sriov_vlans) {
+			qlcnic_sriov_free_vlans(adapter);
 			return -ENOMEM;
+		}
 	}
 
 	return 0;

[PATCH 6.6 134/166] smb: client: fix regression with guest option

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Alcantara <pc@manguebit.com>

commit fc99045effa81fdf509c2a97cbb7e6e8f2fd4443 upstream.

When mounting a CIFS share with 'guest' mount option, mount.cifs(8)
will set empty password= and password2= options.  Currently we only
handle empty strings from user= and password= options, so the mount
will fail with

	cifs: Bad value for 'password2'

Fix this by handling empty string from password2= option as well.

Link: https://bbs.archlinux.org/viewtopic.php?id=303927
Reported-by: Adam Williamson <awilliam@redhat.com>
Closes: https://lore.kernel.org/r/83c00b5fea81c07f6897a5dd3ef50fd3b290f56c.camel@redhat.com
Fixes: 35f834265e0d ("smb3: fix broken reconnect when password changing on the server by allowing password rotation")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/fs_context.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/smb/client/fs_context.c
+++ b/fs/smb/client/fs_context.c
@@ -162,6 +162,7 @@ const struct fs_parameter_spec smb3_fs_p
 	fsparam_string("username", Opt_user),
 	fsparam_string("pass", Opt_pass),
 	fsparam_string("password", Opt_pass),
+	fsparam_string("pass2", Opt_pass2),
 	fsparam_string("password2", Opt_pass2),
 	fsparam_string("ip", Opt_ip),
 	fsparam_string("addr", Opt_ip),
@@ -1041,6 +1042,9 @@ static int smb3_fs_context_parse_param(s
 		} else if (!strcmp("user", param->key) || !strcmp("username", param->key)) {
 			skip_parsing = true;
 			opt = Opt_user;
+		} else if (!strcmp("pass2", param->key) || !strcmp("password2", param->key)) {
+			skip_parsing = true;
+			opt = Opt_pass2;
 		}
 	}
 

[PATCH 6.6 135/166] rust: Disallow BTF generation with Rust + LTO

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Maurer <mmaurer@google.com>

commit 5daa0c35a1f0e7a6c3b8ba9cb721e7d1ace6e619 upstream.

The kernel cannot currently self-parse BTF containing Rust debug
information. pahole uses the language of the CU to determine whether to
filter out debug information when generating the BTF. When LTO is
enabled, Rust code can cross CU boundaries, resulting in Rust debug
information in CUs labeled as C. This results in a system which cannot
parse its own BTF.

Signed-off-by: Matthew Maurer <mmaurer@google.com>
Cc: stable@vger.kernel.org
Fixes: c1177979af9c ("btf, scripts: Exclude Rust CUs with pahole")
Link: https://lore.kernel.org/r/20250108-rust-btf-lto-incompat-v1-1-60243ff6d820@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 init/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1908,7 +1908,7 @@ config RUST
 	depends on !GCC_PLUGINS
 	depends on !RANDSTRUCT
 	depends on !SHADOW_CALL_STACK
-	depends on !DEBUG_INFO_BTF || PAHOLE_HAS_LANG_EXCLUDE
+	depends on !DEBUG_INFO_BTF || (PAHOLE_HAS_LANG_EXCLUDE && !LTO)
 	help
 	  Enables Rust support in the kernel.
 

[PATCH 6.6 136/166] rust: init: fix `Zeroable` implementation for `Option<NonNull<T>>` and `Option<KBox<T>>`

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benno Lossin <benno.lossin@proton.me>

commit df27cef153603b18a7d094b53cc3d5264ff32797 upstream.

According to [1], `NonNull<T>` and `#[repr(transparent)]` wrapper types
such as our custom `KBox<T>` have the null pointer optimization only if
`T: Sized`. Thus remove the `Zeroable` implementation for the unsized
case.

Link: https://doc.rust-lang.org/stable/std/option/index.html#representation [1]
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/rust-for-linux/CAH5fLghL+qzrD8KiCF1V3vf2YcC6aWySzkmaE2Zzrnh1gKj-hw@mail.gmail.com/
Cc: stable@vger.kernel.org # v6.12+ (a custom patch will be needed for 6.6.y)
Fixes: 38cde0bd7b67 ("rust: init: add `Zeroable` trait and `init::zeroed` function")
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250305132836.2145476-1-benno.lossin@proton.me
[ Added Closes tag and moved up the Reported-by one. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 rust/kernel/init.rs |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

--- a/rust/kernel/init.rs
+++ b/rust/kernel/init.rs
@@ -1310,17 +1310,14 @@ impl_zeroable! {
     // SAFETY: `T: Zeroable` and `UnsafeCell` is `repr(transparent)`.
     {<T: ?Sized + Zeroable>} UnsafeCell<T>,
 
-    // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee).
+    // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee:
+    // https://doc.rust-lang.org/stable/std/option/index.html#representation).
     Option<NonZeroU8>, Option<NonZeroU16>, Option<NonZeroU32>, Option<NonZeroU64>,
     Option<NonZeroU128>, Option<NonZeroUsize>,
     Option<NonZeroI8>, Option<NonZeroI16>, Option<NonZeroI32>, Option<NonZeroI64>,
     Option<NonZeroI128>, Option<NonZeroIsize>,
-
-    // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee).
-    //
-    // In this case we are allowed to use `T: ?Sized`, since all zeros is the `None` variant.
-    {<T: ?Sized>} Option<NonNull<T>>,
-    {<T: ?Sized>} Option<Box<T>>,
+    {<T>} Option<NonNull<T>>,
+    {<T>} Option<Box<T>>,
 
     // SAFETY: `null` pointer is valid.
     //

[PATCH 6.6 137/166] lib/buildid: Handle memfd_secret() files in build_id_parse()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrii Nakryiko <andrii@kernel.org>

commit 5ac9b4e935dfc6af41eee2ddc21deb5c36507a9f upstream.

>From memfd_secret(2) manpage:

  The memory areas backing the file created with memfd_secret(2) are
  visible only to the processes that have access to the file descriptor.
  The memory region is removed from the kernel page tables and only the
  page tables of the processes holding the file descriptor map the
  corresponding physical memory. (Thus, the pages in the region can't be
  accessed by the kernel itself, so that, for example, pointers to the
  region can't be passed to system calls.)

We need to handle this special case gracefully in build ID fetching
code. Return -EFAULT whenever secretmem file is passed to build_id_parse()
family of APIs. Original report and repro can be found in [0].

  [0] https://lore.kernel.org/bpf/ZwyG8Uro%2FSyTXAni@ly-workstation/

Fixes: de3ec364c3c3 ("lib/buildid: add single folio-based file reader abstraction")
Reported-by: Yi Lai <yi1.lai@intel.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/bpf/20241017175431.6183-A-hca@linux.ibm.com
Link: https://lore.kernel.org/bpf/20241017174713.2157873-1-andrii@kernel.org
[ Chen Linxuan: backport same logic without folio-based changes ]
Fixes: 88a16a130933 ("perf: Add build id data in mmap2 event")
Signed-off-by: Chen Linxuan <chenlinxuan@deepin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 lib/buildid.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/lib/buildid.c
+++ b/lib/buildid.c
@@ -5,6 +5,7 @@
 #include <linux/elf.h>
 #include <linux/kernel.h>
 #include <linux/pagemap.h>
+#include <linux/secretmem.h>
 
 #define BUILD_ID 3
 
@@ -157,6 +158,10 @@ int build_id_parse(struct vm_area_struct
 	if (!vma->vm_file)
 		return -EINVAL;
 
+	/* reject secretmem folios created with memfd_secret() */
+	if (vma_is_secretmem(vma))
+		return -EFAULT;
+
 	page = find_get_page(vma->vm_file->f_mapping, 0);
 	if (!page)
 		return -EFAULT;	/* page not mapped */

[PATCH 6.6 138/166] mm: split critical region in remap_file_pages() and invoke LSMs in between

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit 58a039e679fe72bd0efa8b2abe669a7914bb4429 upstream.

Commit ea7e2d5e49c0 ("mm: call the security_mmap_file() LSM hook in
remap_file_pages()") fixed a security issue, it added an LSM check when
trying to remap file pages, so that LSMs have the opportunity to evaluate
such action like for other memory operations such as mmap() and
mprotect().

However, that commit called security_mmap_file() inside the mmap_lock
lock, while the other calls do it before taking the lock, after commit
8b3ec6814c83 ("take security_mmap_file() outside of ->mmap_sem").

This caused lock inversion issue with IMA which was taking the mmap_lock
and i_mutex lock in the opposite way when the remap_file_pages() system
call was called.

Solve the issue by splitting the critical region in remap_file_pages() in
two regions: the first takes a read lock of mmap_lock, retrieves the VMA
and the file descriptor associated, and calculates the 'prot' and 'flags'
variables; the second takes a write lock on mmap_lock, checks that the VMA
flags and the VMA file descriptor are the same as the ones obtained in the
first critical region (otherwise the system call fails), and calls
do_mmap().

In between, after releasing the read lock and before taking the write
lock, call security_mmap_file(), and solve the lock inversion issue.

Link: https://lkml.kernel.org/r/20241018161415.3845146-1-roberto.sassu@huaweicloud.com
Fixes: ea7e2d5e49c0 ("mm: call the security_mmap_file() LSM hook in remap_file_pages()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reported-by: syzbot+1cd571a672400ef3a930@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-security-module/66f7b10e.050a0220.46d20.0036.GAE@google.com/
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Tested-by: syzbot+1cd571a672400ef3a930@syzkaller.appspotmail.com
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Shu Han <ebpqwerty472123@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/mmap.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 52 insertions(+), 17 deletions(-)

--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2981,6 +2981,7 @@ SYSCALL_DEFINE5(remap_file_pages, unsign
 	unsigned long populate = 0;
 	unsigned long ret = -EINVAL;
 	struct file *file;
+	vm_flags_t vm_flags;
 
 	pr_warn_once("%s (%d) uses deprecated remap_file_pages() syscall. See Documentation/mm/remap_file_pages.rst.\n",
 		     current->comm, current->pid);
@@ -2997,12 +2998,60 @@ SYSCALL_DEFINE5(remap_file_pages, unsign
 	if (pgoff + (size >> PAGE_SHIFT) < pgoff)
 		return ret;
 
-	if (mmap_write_lock_killable(mm))
+	if (mmap_read_lock_killable(mm))
 		return -EINTR;
 
+	/*
+	 * Look up VMA under read lock first so we can perform the security
+	 * without holding locks (which can be problematic). We reacquire a
+	 * write lock later and check nothing changed underneath us.
+	 */
 	vma = vma_lookup(mm, start);
 
-	if (!vma || !(vma->vm_flags & VM_SHARED))
+	if (!vma || !(vma->vm_flags & VM_SHARED)) {
+		mmap_read_unlock(mm);
+		return -EINVAL;
+	}
+
+	prot |= vma->vm_flags & VM_READ ? PROT_READ : 0;
+	prot |= vma->vm_flags & VM_WRITE ? PROT_WRITE : 0;
+	prot |= vma->vm_flags & VM_EXEC ? PROT_EXEC : 0;
+
+	flags &= MAP_NONBLOCK;
+	flags |= MAP_SHARED | MAP_FIXED | MAP_POPULATE;
+	if (vma->vm_flags & VM_LOCKED)
+		flags |= MAP_LOCKED;
+
+	/* Save vm_flags used to calculate prot and flags, and recheck later. */
+	vm_flags = vma->vm_flags;
+	file = get_file(vma->vm_file);
+
+	mmap_read_unlock(mm);
+
+	/* Call outside mmap_lock to be consistent with other callers. */
+	ret = security_mmap_file(file, prot, flags);
+	if (ret) {
+		fput(file);
+		return ret;
+	}
+
+	ret = -EINVAL;
+
+	/* OK security check passed, take write lock + let it rip. */
+	if (mmap_write_lock_killable(mm)) {
+		fput(file);
+		return -EINTR;
+	}
+
+	vma = vma_lookup(mm, start);
+
+	if (!vma)
+		goto out;
+
+	/* Make sure things didn't change under us. */
+	if (vma->vm_flags != vm_flags)
+		goto out;
+	if (vma->vm_file != file)
 		goto out;
 
 	if (start + size > vma->vm_end) {
@@ -3030,25 +3079,11 @@ SYSCALL_DEFINE5(remap_file_pages, unsign
 			goto out;
 	}
 
-	prot |= vma->vm_flags & VM_READ ? PROT_READ : 0;
-	prot |= vma->vm_flags & VM_WRITE ? PROT_WRITE : 0;
-	prot |= vma->vm_flags & VM_EXEC ? PROT_EXEC : 0;
-
-	flags &= MAP_NONBLOCK;
-	flags |= MAP_SHARED | MAP_FIXED | MAP_POPULATE;
-	if (vma->vm_flags & VM_LOCKED)
-		flags |= MAP_LOCKED;
-
-	file = get_file(vma->vm_file);
-	ret = security_mmap_file(vma->vm_file, prot, flags);
-	if (ret)
-		goto out_fput;
 	ret = do_mmap(vma->vm_file, start, size,
 			prot, flags, 0, pgoff, &populate, NULL);
-out_fput:
-	fput(file);
 out:
 	mmap_write_unlock(mm);
+	fput(file);
 	if (populate)
 		mm_populate(ret, populate);
 	if (!IS_ERR_VALUE(ret))

[PATCH 6.6 139/166] ASoC: ops: Consistently treat platform_max as control value

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 0eba2a7e858907a746ba69cd002eb9eb4dbd7bf3 ]

This reverts commit 9bdd10d57a88 ("ASoC: ops: Shift tested values in
snd_soc_put_volsw() by +min"), and makes some additional related
updates.

There are two ways the platform_max could be interpreted; the maximum
register value, or the maximum value the control can be set to. The
patch moved from treating the value as a control value to a register
one. When the patch was applied it was technically correct as
snd_soc_limit_volume() also used the register interpretation. However,
even then most of the other usages treated platform_max as a
control value, and snd_soc_limit_volume() has since been updated to
also do so in commit fb9ad24485087 ("ASoC: ops: add correct range
check for limiting volume"). That patch however, missed updating
snd_soc_put_volsw() back to the control interpretation, and fixing
snd_soc_info_volsw_range(). The control interpretation makes more
sense as limiting is typically done from the machine driver, so it is
appropriate to use the customer facing representation rather than the
internal codec representation. Update all the code to consistently use
this interpretation of platform_max.

Finally, also add some comments to the soc_mixer_control struct to
hopefully avoid further patches switching between the two approaches.

Fixes: fb9ad24485087 ("ASoC: ops: add correct range check for limiting volume")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250228151456.3703342-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/soc.h |  5 ++++-
 sound/soc/soc-ops.c | 15 +++++++--------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/include/sound/soc.h b/include/sound/soc.h
index c1acc46529b9d..1f99c29aebdfe 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -1184,7 +1184,10 @@ void snd_soc_close_delayed_work(struct snd_soc_pcm_runtime *rtd);
 
 /* mixer control */
 struct soc_mixer_control {
-	int min, max, platform_max;
+	/* Minimum and maximum specified as written to the hardware */
+	int min, max;
+	/* Limited maximum value specified as presented through the control */
+	int platform_max;
 	int reg, rreg;
 	unsigned int shift, rshift;
 	unsigned int sign_bit;
diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index b27e89ff6a167..b4cfc34d00ee6 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -336,7 +336,7 @@ int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
 	if (ucontrol->value.integer.value[0] < 0)
 		return -EINVAL;
 	val = ucontrol->value.integer.value[0];
-	if (mc->platform_max && ((int)val + min) > mc->platform_max)
+	if (mc->platform_max && val > mc->platform_max)
 		return -EINVAL;
 	if (val > max - min)
 		return -EINVAL;
@@ -349,7 +349,7 @@ int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
 		if (ucontrol->value.integer.value[1] < 0)
 			return -EINVAL;
 		val2 = ucontrol->value.integer.value[1];
-		if (mc->platform_max && ((int)val2 + min) > mc->platform_max)
+		if (mc->platform_max && val2 > mc->platform_max)
 			return -EINVAL;
 		if (val2 > max - min)
 			return -EINVAL;
@@ -502,17 +502,16 @@ int snd_soc_info_volsw_range(struct snd_kcontrol *kcontrol,
 {
 	struct soc_mixer_control *mc =
 		(struct soc_mixer_control *)kcontrol->private_value;
-	int platform_max;
-	int min = mc->min;
+	int max;
 
-	if (!mc->platform_max)
-		mc->platform_max = mc->max;
-	platform_max = mc->platform_max;
+	max = mc->max - mc->min;
+	if (mc->platform_max && mc->platform_max < max)
+		max = mc->platform_max;
 
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = snd_soc_volsw_is_stereo(mc) ? 2 : 1;
 	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = platform_max - min;
+	uinfo->value.integer.max = max;
 
 	return 0;
 }
-- 
2.39.5

[PATCH 6.6 140/166] rust: error: add missing newline to pr_warn! calls

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alban Kurti <kurti@invicto.ai>

[ Upstream commit 6f5c36f56d475732981dcf624e0ac0cc7c8984c8 ]

Added missing newline at the end of pr_warn! usage
so the log is not missed.

Fixes: 6551a7fe0acb ("rust: error: Add Error::from_errno{_unchecked}()")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-2-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 rust/kernel/error.rs | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/rust/kernel/error.rs b/rust/kernel/error.rs
index 032b645439539..e82d31aa1f307 100644
--- a/rust/kernel/error.rs
+++ b/rust/kernel/error.rs
@@ -103,7 +103,7 @@ impl Error {
         if errno < -(bindings::MAX_ERRNO as i32) || errno >= 0 {
             // TODO: Make it a `WARN_ONCE` once available.
             crate::pr_warn!(
-                "attempted to create `Error` with out of range `errno`: {}",
+                "attempted to create `Error` with out of range `errno`: {}\n",
                 errno
             );
             return code::EINVAL;
-- 
2.39.5

[PATCH 6.6 141/166] drm/gma500: Add NULL check for pci_gfx_root in mid_get_vbt_data()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Abramov <i.abramov@mt-integration.ru>

[ Upstream commit 9af152dcf1a06f589f44a74da4ad67e365d4db9a ]

Since pci_get_domain_bus_and_slot() can return NULL, add NULL check for
pci_gfx_root in the mid_get_vbt_data().

This change is similar to the checks implemented in mid_get_fuse_settings()
and mid_get_pci_revID(), which were introduced by commit 0cecdd818cd7
("gma500: Final enables for Oaktrail") as "additional minor
bulletproofing".

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: f910b411053f ("gma500: Add the glue to the various BIOS and firmware interfaces")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306112046.17144-1-i.abramov@mt-integration.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/gma500/mid_bios.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/gma500/mid_bios.c b/drivers/gpu/drm/gma500/mid_bios.c
index 7e76790c6a81f..cba97d7db131d 100644
--- a/drivers/gpu/drm/gma500/mid_bios.c
+++ b/drivers/gpu/drm/gma500/mid_bios.c
@@ -279,6 +279,11 @@ static void mid_get_vbt_data(struct drm_psb_private *dev_priv)
 					    0, PCI_DEVFN(2, 0));
 	int ret = -1;
 
+	if (pci_gfx_root == NULL) {
+		WARN_ON(1);
+		return;
+	}
+
 	/* Get the address of the platform config vbt */
 	pci_read_config_dword(pci_gfx_root, 0xFC, &addr);
 	pci_dev_put(pci_gfx_root);
-- 
2.39.5

[PATCH 6.6 142/166] ASoC: cs42l43: Fix maximum ADC Volume

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit e26f1cfeac6712516bfeed80890da664f4f2e88a ]

The range of ADC volume is -1 -> 3 (-6 to 18dB) so the number of levels
should actually be 4.

Fixes: fc918cbe874e ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250306133254.1861046-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l43.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c
index 1443eb1dc0b17..4f78b7668b609 100644
--- a/sound/soc/codecs/cs42l43.c
+++ b/sound/soc/codecs/cs42l43.c
@@ -1020,7 +1020,7 @@ static const struct snd_kcontrol_new cs42l43_controls[] = {
 
 	SOC_DOUBLE_R_SX_TLV("ADC Volume", CS42L43_ADC_B_CTRL1, CS42L43_ADC_B_CTRL2,
 			    CS42L43_ADC_PGA_GAIN_SHIFT,
-			    0xF, 5, cs42l43_adc_tlv),
+			    0xF, 4, cs42l43_adc_tlv),
 
 	SOC_DOUBLE("PDM1 Invert Switch", CS42L43_DMIC_PDM_CTRL,
 		   CS42L43_PDM1L_INV_SHIFT, CS42L43_PDM1R_INV_SHIFT, 1, 0),
-- 
2.39.5

[PATCH 6.6 143/166] rust: init: add missing newline to pr_info! calls

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alban Kurti <kurti@invicto.ai>

[ Upstream commit 6933c1067fe6df8ddb34dd68bdb2aa172cbd08c8 ]

Several pr_info! calls in rust/kernel/init.rs (both in code examples
and macro documentation) were missing a newline, causing logs to
run together. This commit updates these calls to include a trailing
newline, improving readability and consistency with the C side.

Fixes: 6841d45a3030 ("rust: init: add `stack_pin_init!` macro")
Fixes: 7f8977a7fe6d ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Fixes: d0fdc3961270 ("rust: init: add `PinnedDrop` trait and macros")
Fixes: 4af84c6a85c6 ("rust: init: update expanded macro explanation")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-3-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. Added
  one more Fixes tag (still same set of stable kernels). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 rust/kernel/init.rs        | 12 ++++++------
 rust/kernel/init/macros.rs |  6 +++---
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/rust/kernel/init.rs b/rust/kernel/init.rs
index 6ef9f61820184..af1c77cc12b28 100644
--- a/rust/kernel/init.rs
+++ b/rust/kernel/init.rs
@@ -258,7 +258,7 @@ pub mod macros;
 ///     },
 /// }));
 /// let foo: Pin<&mut Foo> = foo;
-/// pr_info!("a: {}", &*foo.a.lock());
+/// pr_info!("a: {}\n", &*foo.a.lock());
 /// ```
 ///
 /// # Syntax
@@ -310,7 +310,7 @@ macro_rules! stack_pin_init {
 ///     })?,
 /// }));
 /// let foo = foo.unwrap();
-/// pr_info!("a: {}", &*foo.a.lock());
+/// pr_info!("a: {}\n", &*foo.a.lock());
 /// ```
 ///
 /// ```rust,ignore
@@ -335,7 +335,7 @@ macro_rules! stack_pin_init {
 ///         x: 64,
 ///     })?,
 /// }));
-/// pr_info!("a: {}", &*foo.a.lock());
+/// pr_info!("a: {}\n", &*foo.a.lock());
 /// # Ok::<_, AllocError>(())
 /// ```
 ///
@@ -800,7 +800,7 @@ pub unsafe trait PinInit<T: ?Sized, E = Infallible>: Sized {
     ///
     /// impl Foo {
     ///     fn setup(self: Pin<&mut Self>) {
-    ///         pr_info!("Setting up foo");
+    ///         pr_info!("Setting up foo\n");
     ///     }
     /// }
     ///
@@ -906,7 +906,7 @@ pub unsafe trait Init<T: ?Sized, E = Infallible>: PinInit<T, E> {
     ///
     /// impl Foo {
     ///     fn setup(&mut self) {
-    ///         pr_info!("Setting up foo");
+    ///         pr_info!("Setting up foo\n");
     ///     }
     /// }
     ///
@@ -1229,7 +1229,7 @@ impl<T> InPlaceInit<T> for UniqueArc<T> {
 /// #[pinned_drop]
 /// impl PinnedDrop for Foo {
 ///     fn drop(self: Pin<&mut Self>) {
-///         pr_info!("Foo is being dropped!");
+///         pr_info!("Foo is being dropped!\n");
 ///     }
 /// }
 /// ```
diff --git a/rust/kernel/init/macros.rs b/rust/kernel/init/macros.rs
index cb6e61b6c50bd..cb769a09e7426 100644
--- a/rust/kernel/init/macros.rs
+++ b/rust/kernel/init/macros.rs
@@ -45,7 +45,7 @@
 //! #[pinned_drop]
 //! impl PinnedDrop for Foo {
 //!     fn drop(self: Pin<&mut Self>) {
-//!         pr_info!("{self:p} is getting dropped.");
+//!         pr_info!("{self:p} is getting dropped.\n");
 //!     }
 //! }
 //!
@@ -412,7 +412,7 @@
 //! #[pinned_drop]
 //! impl PinnedDrop for Foo {
 //!     fn drop(self: Pin<&mut Self>) {
-//!         pr_info!("{self:p} is getting dropped.");
+//!         pr_info!("{self:p} is getting dropped.\n");
 //!     }
 //! }
 //! ```
@@ -423,7 +423,7 @@
 //! // `unsafe`, full path and the token parameter are added, everything else stays the same.
 //! unsafe impl ::kernel::init::PinnedDrop for Foo {
 //!     fn drop(self: Pin<&mut Self>, _: ::kernel::init::__internal::OnlyCallFromDrop) {
-//!         pr_info!("{self:p} is getting dropped.");
+//!         pr_info!("{self:p} is getting dropped.\n");
 //!     }
 //! }
 //! ```
-- 
2.39.5

[PATCH 6.6 144/166] ASoC: rt722-sdca: add missing readable registers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bard Liao <yung-chuan.liao@linux.intel.com>

[ Upstream commit 247fba13416af65b155949bae582d55c310f58b6 ]

SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15,
RT722_SDCA_CTL_FU_CH_GAIN, CH_01) ... SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY,
RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN, CH_04) are used by the
"FU15 Boost Volume" control, but not marked as readable.
And the mbq size are 2 for those registers.

Fixes: 7f5d6036ca005 ("ASoC: rt722-sdca: Add RT722 SDCA driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250310080440.58797-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt722-sdca-sdw.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/codecs/rt722-sdca-sdw.c b/sound/soc/codecs/rt722-sdca-sdw.c
index 91314327d9eee..c382cb6be6025 100644
--- a/sound/soc/codecs/rt722-sdca-sdw.c
+++ b/sound/soc/codecs/rt722-sdca-sdw.c
@@ -86,6 +86,10 @@ static bool rt722_sdca_mbq_readable_register(struct device *dev, unsigned int re
 	case 0x6100067:
 	case 0x6100070 ... 0x610007c:
 	case 0x6100080:
+	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN,
+			  CH_01) ...
+	     SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_FU15, RT722_SDCA_CTL_FU_CH_GAIN,
+			  CH_04):
 	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_USER_FU1E, RT722_SDCA_CTL_FU_VOLUME,
 			CH_01):
 	case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT722_SDCA_ENT_USER_FU1E, RT722_SDCA_CTL_FU_VOLUME,
-- 
2.39.5

[PATCH 6.6 145/166] ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ed92bc5264c4357d4fca292c769ea9967cd3d3b6 ]

Free some resources in the error handling path of the probe, as already
done in the remove function.

Fixes: e3523e01869d ("ASoC: wm0010: Add initial wm0010 DSP driver")
Fixes: fd8b96574456 ("ASoC: wm0010: Clear IRQ as wake source and include missing header")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/5139ba1ab8c4c157ce04e56096a0f54a1683195c.1741549792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm0010.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm0010.c b/sound/soc/codecs/wm0010.c
index 1d4259433f47e..6b67edd528bc5 100644
--- a/sound/soc/codecs/wm0010.c
+++ b/sound/soc/codecs/wm0010.c
@@ -951,7 +951,7 @@ static int wm0010_spi_probe(struct spi_device *spi)
 	if (ret) {
 		dev_err(wm0010->dev, "Failed to set IRQ %d as wake source: %d\n",
 			irq, ret);
-		return ret;
+		goto free_irq;
 	}
 
 	if (spi->max_speed_hz)
@@ -963,9 +963,18 @@ static int wm0010_spi_probe(struct spi_device *spi)
 				     &soc_component_dev_wm0010, wm0010_dai,
 				     ARRAY_SIZE(wm0010_dai));
 	if (ret < 0)
-		return ret;
+		goto disable_irq_wake;
 
 	return 0;
+
+disable_irq_wake:
+	irq_set_irq_wake(wm0010->irq, 0);
+
+free_irq:
+	if (wm0010->irq)
+		free_irq(wm0010->irq, wm0010);
+
+	return ret;
 }
 
 static void wm0010_spi_remove(struct spi_device *spi)
-- 
2.39.5

[PATCH 6.6 146/166] scripts: generate_rust_analyzer: add missing macros deps

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tamir Duberstein <tamird@gmail.com>

[ Upstream commit 2e0f91aba507a3cb59f7a12fc3ea2b7d4d6675b7 ]

The macros crate has depended on std and proc_macro since its
introduction in commit 1fbde52bde73 ("rust: add `macros` crate"). These
dependencies were omitted from commit 8c4555ccc55c ("scripts: add
`generate_rust_analyzer.py`") resulting in missing go-to-definition and
autocomplete, and false-positive warnings emitted from rust-analyzer
such as:

  [{
  	"resource": "/Users/tamird/src/linux/rust/macros/module.rs",
  	"owner": "_generated_diagnostic_collection_name_#1",
  	"code": {
  		"value": "non_snake_case",
  		"target": {
  			"$mid": 1,
  			"path": "/rustc/",
  			"scheme": "https",
  			"authority": "doc.rust-lang.org",
  			"query": "search=non_snake_case"
  		}
  	},
  	"severity": 4,
  	"message": "Variable `None` should have snake_case name, e.g. `none`",
  	"source": "rust-analyzer",
  	"startLineNumber": 123,
  	"startColumn": 17,
  	"endLineNumber": 123,
  	"endColumn": 21
  }]

Add the missing dependencies to improve the developer experience.

  [ Fiona had a different approach (thanks!) at:

        https://lore.kernel.org/rust-for-linux/20241205115438.234221-1-me@kloenk.dev/

    But Tamir and Fiona agreed to this one. - Miguel ]

Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Diagnosed-by: Chayim Refael Friedman <chayimfr@gmail.com>
Link: https://github.com/rust-lang/rust-analyzer/issues/17759#issuecomment-2646328275
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250210-rust-analyzer-macros-core-dep-v3-1-45eb4836f218@gmail.com
[ Removed `return`. Changed tag name. Added Link. Slightly
  reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/generate_rust_analyzer.py | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/scripts/generate_rust_analyzer.py b/scripts/generate_rust_analyzer.py
index fc52bc41d3e7b..c99173e4b8f3e 100755
--- a/scripts/generate_rust_analyzer.py
+++ b/scripts/generate_rust_analyzer.py
@@ -49,14 +49,26 @@ def generate_crates(srctree, objtree, sysroot_src, external_src, cfgs):
             }
         })
 
-    # First, the ones in `rust/` since they are a bit special.
-    append_crate(
-        "core",
-        sysroot_src / "core" / "src" / "lib.rs",
-        [],
-        cfg=crates_cfgs.get("core", []),
-        is_workspace_member=False,
-    )
+    def append_sysroot_crate(
+        display_name,
+        deps,
+        cfg=[],
+    ):
+        append_crate(
+            display_name,
+            sysroot_src / display_name / "src" / "lib.rs",
+            deps,
+            cfg,
+            is_workspace_member=False,
+        )
+
+    # NB: sysroot crates reexport items from one another so setting up our transitive dependencies
+    # here is important for ensuring that rust-analyzer can resolve symbols. The sources of truth
+    # for this dependency graph are `(sysroot_src / crate / "Cargo.toml" for crate in crates)`.
+    append_sysroot_crate("core", [], cfg=crates_cfgs.get("core", []))
+    append_sysroot_crate("alloc", ["core"])
+    append_sysroot_crate("std", ["alloc", "core"])
+    append_sysroot_crate("proc_macro", ["core", "std"])
 
     append_crate(
         "compiler_builtins",
@@ -74,7 +86,7 @@ def generate_crates(srctree, objtree, sysroot_src, external_src, cfgs):
     append_crate(
         "macros",
         srctree / "rust" / "macros" / "lib.rs",
-        [],
+        ["std", "proc_macro"],
         is_proc_macro=True,
     )
     crates[-1]["proc_macro_dylib_path"] = f"{objtree}/rust/libmacros.so"
-- 
2.39.5

[PATCH 6.6 147/166] cifs: Fix integer overflow while processing acregmax mount option

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murad Masimov <m.masimov@mt-integration.ru>

[ Upstream commit 7489161b1852390b4413d57f2457cd40b34da6cc ]

User-provided mount parameter acregmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 5780464614f6 ("cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/fs_context.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c
index 249dd3f4904e3..82a0987f4f868 100644
--- a/fs/smb/client/fs_context.c
+++ b/fs/smb/client/fs_context.c
@@ -1266,11 +1266,11 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
 		}
 		break;
 	case Opt_acregmax:
-		ctx->acregmax = HZ * result.uint_32;
-		if (ctx->acregmax > CIFS_MAX_ACTIMEO) {
+		if (result.uint_32 > CIFS_MAX_ACTIMEO / HZ) {
 			cifs_errorf(fc, "acregmax too large\n");
 			goto cifs_parse_mount_err;
 		}
+		ctx->acregmax = HZ * result.uint_32;
 		break;
 	case Opt_acdirmax:
 		ctx->acdirmax = HZ * result.uint_32;
-- 
2.39.5

[PATCH 6.6 148/166] cifs: Fix integer overflow while processing acdirmax mount option

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murad Masimov <m.masimov@mt-integration.ru>

[ Upstream commit 5b29891f91dfb8758baf1e2217bef4b16b2b165b ]

User-provided mount parameter acdirmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4c9f948142a5 ("cifs: Add new mount parameter "acdirmax" to allow caching directory metadata")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/fs_context.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c
index 82a0987f4f868..479801187c762 100644
--- a/fs/smb/client/fs_context.c
+++ b/fs/smb/client/fs_context.c
@@ -1273,11 +1273,11 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
 		ctx->acregmax = HZ * result.uint_32;
 		break;
 	case Opt_acdirmax:
-		ctx->acdirmax = HZ * result.uint_32;
-		if (ctx->acdirmax > CIFS_MAX_ACTIMEO) {
+		if (result.uint_32 > CIFS_MAX_ACTIMEO / HZ) {
 			cifs_errorf(fc, "acdirmax too large\n");
 			goto cifs_parse_mount_err;
 		}
+		ctx->acdirmax = HZ * result.uint_32;
 		break;
 	case Opt_actimeo:
 		if (HZ * result.uint_32 > CIFS_MAX_ACTIMEO) {
-- 
2.39.5

[PATCH 6.6 149/166] cifs: Fix integer overflow while processing actimeo mount option

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murad Masimov <m.masimov@mt-integration.ru>

[ Upstream commit 64f690ee22c99e16084e0e45181b2a1eed2fa149 ]

User-provided mount parameter actimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 6d20e8406f09 ("cifs: add attribute cache timeout (actimeo) tunable")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/fs_context.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c
index 479801187c762..51604c78f9ea4 100644
--- a/fs/smb/client/fs_context.c
+++ b/fs/smb/client/fs_context.c
@@ -1280,7 +1280,7 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
 		ctx->acdirmax = HZ * result.uint_32;
 		break;
 	case Opt_actimeo:
-		if (HZ * result.uint_32 > CIFS_MAX_ACTIMEO) {
+		if (result.uint_32 > CIFS_MAX_ACTIMEO / HZ) {
 			cifs_errorf(fc, "timeout too large\n");
 			goto cifs_parse_mount_err;
 		}
-- 
2.39.5

[PATCH 6.6 150/166] cifs: Fix integer overflow while processing closetimeo mount option

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murad Masimov <m.masimov@mt-integration.ru>

[ Upstream commit d5a30fddfe2f2e540f6c43b59cf701809995faef ]

User-provided mount parameter closetimeo of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 5efdd9122eff ("smb3: allow deferred close timeout to be configurable")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/fs_context.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c
index 51604c78f9ea4..b90cc918de7a3 100644
--- a/fs/smb/client/fs_context.c
+++ b/fs/smb/client/fs_context.c
@@ -1292,11 +1292,11 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
 		ctx->acdirmax = ctx->acregmax = HZ * result.uint_32;
 		break;
 	case Opt_closetimeo:
-		ctx->closetimeo = HZ * result.uint_32;
-		if (ctx->closetimeo > SMB3_MAX_DCLOSETIMEO) {
+		if (result.uint_32 > SMB3_MAX_DCLOSETIMEO / HZ) {
 			cifs_errorf(fc, "closetimeo too large\n");
 			goto cifs_parse_mount_err;
 		}
+		ctx->closetimeo = HZ * result.uint_32;
 		break;
 	case Opt_echo_interval:
 		ctx->echo_interval = result.uint_32;
-- 
2.39.5

[PATCH 6.6 151/166] cifs: Validate content of WSL reparse point buffers

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 1f48660667efb97c3cf70485c7e1977af718b48b ]

WSL socket, fifo, char and block devices have empty reparse buffer.
Validate the length of the reparse buffer.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: cad3fc0a4c8c ("cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/reparse.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c
index e56a8df23fec9..bd8808e50d127 100644
--- a/fs/smb/client/reparse.c
+++ b/fs/smb/client/reparse.c
@@ -651,6 +651,11 @@ int parse_reparse_point(struct reparse_data_buffer *buf,
 	case IO_REPARSE_TAG_LX_FIFO:
 	case IO_REPARSE_TAG_LX_CHR:
 	case IO_REPARSE_TAG_LX_BLK:
+		if (le16_to_cpu(buf->ReparseDataLength) != 0) {
+			cifs_dbg(VFS, "srv returned malformed buffer for reparse point: 0x%08x\n",
+				 le32_to_cpu(buf->ReparseTag));
+			return -EIO;
+		}
 		break;
 	default:
 		cifs_tcon_dbg(VFS | ONCE, "unhandled reparse tag: 0x%08x\n",
-- 
2.39.5

[PATCH 6.6 152/166] cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pali Rohár <pali@kernel.org>

[ Upstream commit cad3fc0a4c8cef07b07ceddc137f582267577250 ]

This would help to track and detect by caller if the reparse point type was
processed or not.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/reparse.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c
index bd8808e50d127..bb246ef0458fb 100644
--- a/fs/smb/client/reparse.c
+++ b/fs/smb/client/reparse.c
@@ -656,13 +656,12 @@ int parse_reparse_point(struct reparse_data_buffer *buf,
 				 le32_to_cpu(buf->ReparseTag));
 			return -EIO;
 		}
-		break;
+		return 0;
 	default:
 		cifs_tcon_dbg(VFS | ONCE, "unhandled reparse tag: 0x%08x\n",
 			      le32_to_cpu(buf->ReparseTag));
-		break;
+		return -EOPNOTSUPP;
 	}
-	return 0;
 }
 
 int smb2_parse_reparse_point(struct cifs_sb_info *cifs_sb,
-- 
2.39.5

[PATCH 6.6 153/166] i2c: ali1535: Fix an error handling path in ali1535_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 9b5463f349d019a261f1e80803447efca3126151 ]

If i2c_add_adapter() fails, the request_region() call in ali1535_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/0daf63d7a2ce74c02e2664ba805bbfadab7d25e5.1741031571.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-ali1535.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index ee83c4581bce0..cd2c8afebe798 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -490,6 +490,8 @@ MODULE_DEVICE_TABLE(pci, ali1535_ids);
 
 static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int ret;
+
 	if (ali1535_setup(dev)) {
 		dev_warn(&dev->dev,
 			"ALI1535 not detected, module not inserted.\n");
@@ -501,7 +503,15 @@ static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	snprintf(ali1535_adapter.name, sizeof(ali1535_adapter.name),
 		"SMBus ALI1535 adapter at %04x", ali1535_offset);
-	return i2c_add_adapter(&ali1535_adapter);
+	ret = i2c_add_adapter(&ali1535_adapter);
+	if (ret)
+		goto release_region;
+
+	return 0;
+
+release_region:
+	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+	return ret;
 }
 
 static void ali1535_remove(struct pci_dev *dev)
-- 
2.39.5

[PATCH 6.6 154/166] i2c: ali15x3: Fix an error handling path in ali15x3_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 6e55caaf30c88209d097e575a169b1dface1ab69 ]

If i2c_add_adapter() fails, the request_region() call in ali15x3_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-ali15x3.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 0231c5be6354f..c3f76b13a76f5 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -474,6 +474,8 @@ MODULE_DEVICE_TABLE (pci, ali15x3_ids);
 
 static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int ret;
+
 	if (ali15x3_setup(dev)) {
 		dev_err(&dev->dev,
 			"ALI15X3 not detected, module not inserted.\n");
@@ -485,7 +487,15 @@ static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	snprintf(ali15x3_adapter.name, sizeof(ali15x3_adapter.name),
 		"SMBus ALI15X3 adapter at %04x", ali15x3_smba);
-	return i2c_add_adapter(&ali15x3_adapter);
+	ret = i2c_add_adapter(&ali15x3_adapter);
+	if (ret)
+		goto release_region;
+
+	return 0;
+
+release_region:
+	release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE);
+	return ret;
 }
 
 static void ali15x3_remove(struct pci_dev *dev)
-- 
2.39.5

[PATCH 6.6 155/166] i2c: sis630: Fix an error handling path in sis630_probe()

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 2b22459792fcb4def9f0936d64575ac11a95a58d ]

If i2c_add_adapter() fails, the request_region() call in sis630_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-sis630.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 87d56250d78a3..c42ecadac4f22 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -509,6 +509,8 @@ MODULE_DEVICE_TABLE(pci, sis630_ids);
 
 static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int ret;
+
 	if (sis630_setup(dev)) {
 		dev_err(&dev->dev,
 			"SIS630 compatible bus not detected, "
@@ -522,7 +524,15 @@ static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	snprintf(sis630_adapter.name, sizeof(sis630_adapter.name),
 		 "SMBus SIS630 adapter at %04x", smbus_base + SMB_STS);
 
-	return i2c_add_adapter(&sis630_adapter);
+	ret = i2c_add_adapter(&sis630_adapter);
+	if (ret)
+		goto release_region;
+
+	return 0;
+
+release_region:
+	release_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION);
+	return ret;
 }
 
 static void sis630_remove(struct pci_dev *dev)
-- 
2.39.5

[PATCH 6.6 156/166] stmmac: loongson: Pass correct arg to PCI function

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philipp Stanner <phasta@kernel.org>

[ Upstream commit 00371a3f48775967950c2fe3ec97b7c786ca956d ]

pcim_iomap_regions() should receive the driver's name as its third
parameter, not the PCI device's name.

Define the driver name with a macro and use it at the appropriate
places, including pcim_iomap_regions().

Cc: stable@vger.kernel.org # v5.14+
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
Link: https://patch.msgid.link/20250226085208.97891-2-phasta@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index ee3604f58def5..bdeec098309ab 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -9,7 +9,10 @@
 #include <linux/of_irq.h>
 #include "stmmac.h"
 
+#define DRIVER_NAME "dwmac-loongson-pci"
+
 static int loongson_default_data(struct plat_stmmacenet_data *plat)
+
 {
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
@@ -95,7 +98,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
-		ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+		ret = pcim_iomap_regions(pdev, BIT(0), DRIVER_NAME);
 		if (ret)
 			goto err_disable_device;
 		break;
@@ -222,7 +225,7 @@ static const struct pci_device_id loongson_dwmac_id_table[] = {
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
 
 static struct pci_driver loongson_dwmac_driver = {
-	.name = "dwmac-loongson-pci",
+	.name = DRIVER_NAME,
 	.id_table = loongson_dwmac_id_table,
 	.probe = loongson_dwmac_probe,
 	.remove = loongson_dwmac_remove,
-- 
2.39.5

[PATCH 6.6 157/166] smb3: add support for IAKerb

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <stfrench@microsoft.com>

[ Upstream commit eea5119fa5979c350af5783a8148eacdd4219715 ]

There are now more servers which advertise support for IAKerb (passthrough
Kerberos authentication via proxy).  IAKerb is a public extension industry
standard Kerberos protocol that allows a client without line-of-sight
to a Domain Controller to authenticate. There can be cases where we
would fail to mount if the server only advertises the OID for IAKerb
in SPNEGO/GSSAPI.  Add code to allow us to still upcall to userspace
in these cases to obtain the Kerberos ticket.

Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 605b249ea967 ("smb: client: Fix match_session bug preventing session reuse")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/asn1.c        | 2 ++
 fs/smb/client/cifs_spnego.c | 4 +++-
 fs/smb/client/cifsglob.h    | 4 ++++
 fs/smb/client/sess.c        | 3 ++-
 fs/smb/client/smb2pdu.c     | 2 +-
 5 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/fs/smb/client/asn1.c b/fs/smb/client/asn1.c
index b5724ef9f182f..214a44509e7b9 100644
--- a/fs/smb/client/asn1.c
+++ b/fs/smb/client/asn1.c
@@ -52,6 +52,8 @@ int cifs_neg_token_init_mech_type(void *context, size_t hdrlen,
 		server->sec_kerberos = true;
 	else if (oid == OID_ntlmssp)
 		server->sec_ntlmssp = true;
+	else if (oid == OID_IAKerb)
+		server->sec_iakerb = true;
 	else {
 		char buf[50];
 
diff --git a/fs/smb/client/cifs_spnego.c b/fs/smb/client/cifs_spnego.c
index af7849e5974ff..2ad067886ec3f 100644
--- a/fs/smb/client/cifs_spnego.c
+++ b/fs/smb/client/cifs_spnego.c
@@ -130,11 +130,13 @@ cifs_get_spnego_key(struct cifs_ses *sesInfo,
 
 	dp = description + strlen(description);
 
-	/* for now, only sec=krb5 and sec=mskrb5 are valid */
+	/* for now, only sec=krb5 and sec=mskrb5 and iakerb are valid */
 	if (server->sec_kerberos)
 		sprintf(dp, ";sec=krb5");
 	else if (server->sec_mskerberos)
 		sprintf(dp, ";sec=mskrb5");
+	else if (server->sec_iakerb)
+		sprintf(dp, ";sec=iakerb");
 	else {
 		cifs_dbg(VFS, "unknown or missing server auth type, use krb5\n");
 		sprintf(dp, ";sec=krb5");
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h
index 6992e1ec02e41..39117343b703f 100644
--- a/fs/smb/client/cifsglob.h
+++ b/fs/smb/client/cifsglob.h
@@ -151,6 +151,7 @@ enum securityEnum {
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO, NTLMv2 hash */
 	Kerberos,		/* Kerberos via SPNEGO */
+	IAKerb,			/* Kerberos proxy */
 };
 
 enum cifs_reparse_type {
@@ -749,6 +750,7 @@ struct TCP_Server_Info {
 	bool	sec_kerberosu2u;	/* supports U2U Kerberos */
 	bool	sec_kerberos;		/* supports plain Kerberos */
 	bool	sec_mskerberos;		/* supports legacy MS Kerberos */
+	bool	sec_iakerb;		/* supports pass-through auth for Kerberos (krb5 proxy) */
 	bool	large_buf;		/* is current buffer large? */
 	/* use SMBD connection instead of socket */
 	bool	rdma;
@@ -2156,6 +2158,8 @@ static inline char *get_security_type_str(enum securityEnum sectype)
 		return "Kerberos";
 	case NTLMv2:
 		return "NTLMv2";
+	case IAKerb:
+		return "IAKerb";
 	default:
 		return "Unknown";
 	}
diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c
index 3216f786908fb..c2a98b2736645 100644
--- a/fs/smb/client/sess.c
+++ b/fs/smb/client/sess.c
@@ -1295,12 +1295,13 @@ cifs_select_sectype(struct TCP_Server_Info *server, enum securityEnum requested)
 		switch (requested) {
 		case Kerberos:
 		case RawNTLMSSP:
+		case IAKerb:
 			return requested;
 		case Unspecified:
 			if (server->sec_ntlmssp &&
 			    (global_secflags & CIFSSEC_MAY_NTLMSSP))
 				return RawNTLMSSP;
-			if ((server->sec_kerberos || server->sec_mskerberos) &&
+			if ((server->sec_kerberos || server->sec_mskerberos || server->sec_iakerb) &&
 			    (global_secflags & CIFSSEC_MAY_KRB5))
 				return Kerberos;
 			fallthrough;
diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c
index 1b6cb533f5b87..0af3535e08f30 100644
--- a/fs/smb/client/smb2pdu.c
+++ b/fs/smb/client/smb2pdu.c
@@ -1428,7 +1428,7 @@ smb2_select_sectype(struct TCP_Server_Info *server, enum securityEnum requested)
 		if (server->sec_ntlmssp &&
 			(global_secflags & CIFSSEC_MAY_NTLMSSP))
 			return RawNTLMSSP;
-		if ((server->sec_kerberos || server->sec_mskerberos) &&
+		if ((server->sec_kerberos || server->sec_mskerberos || server->sec_iakerb) &&
 			(global_secflags & CIFSSEC_MAY_KRB5))
 			return Kerberos;
 		fallthrough;
-- 
2.39.5

[PATCH 6.6 158/166] smb: client: Fix match_session bug preventing session reuse

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Henrique Carvalho <henrique.carvalho@suse.com>

[ Upstream commit 605b249ea96770ac4fac4b8510a99e0f8442be5e ]

Fix a bug in match_session() that can causes the session to not be
reused in some cases.

Reproduction steps:

mount.cifs //server/share /mnt/a -o credentials=creds
mount.cifs //server/share /mnt/b -o credentials=creds,sec=ntlmssp
cat /proc/fs/cifs/DebugData | grep SessionId | wc -l

mount.cifs //server/share /mnt/b -o credentials=creds,sec=ntlmssp
mount.cifs //server/share /mnt/a -o credentials=creds
cat /proc/fs/cifs/DebugData | grep SessionId | wc -l

Cc: stable@vger.kernel.org
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/connect.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c
index dbcaaa274abdb..198681d14153e 100644
--- a/fs/smb/client/connect.c
+++ b/fs/smb/client/connect.c
@@ -1884,9 +1884,8 @@ cifs_get_tcp_session(struct smb3_fs_context *ctx,
 /* this function must be called with ses_lock and chan_lock held */
 static int match_session(struct cifs_ses *ses, struct smb3_fs_context *ctx)
 {
-	if (ctx->sectype != Unspecified &&
-	    ctx->sectype != ses->sectype)
-		return 0;
+	struct TCP_Server_Info *server = ses->server;
+	enum securityEnum ctx_sec, ses_sec;
 
 	if (ctx->dfs_root_ses != ses->dfs_root_ses)
 		return 0;
@@ -1898,11 +1897,20 @@ static int match_session(struct cifs_ses *ses, struct smb3_fs_context *ctx)
 	if (ses->chan_max < ctx->max_channels)
 		return 0;
 
-	switch (ses->sectype) {
+	ctx_sec = server->ops->select_sectype(server, ctx->sectype);
+	ses_sec = server->ops->select_sectype(server, ses->sectype);
+
+	if (ctx_sec != ses_sec)
+		return 0;
+
+	switch (ctx_sec) {
+	case IAKerb:
 	case Kerberos:
 		if (!uid_eq(ctx->cred_uid, ses->cred_uid))
 			return 0;
 		break;
+	case NTLMv2:
+	case RawNTLMSSP:
 	default:
 		/* NULL username means anonymous session */
 		if (ses->user_name == NULL) {
-- 
2.39.5

[PATCH 6.6 159/166] Bluetooth: L2CAP: Fix corrupted list in hci_chan_del

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit ab4eedb790cae44313759b50fe47da285e2519d5 upstream.

This fixes the following trace by reworking the locking of l2cap_conn
so instead of only locking when changing the chan_l list this promotes
chan_lock to a general lock of l2cap_conn so whenever it is being held
it would prevents the likes of l2cap_conn_del to run:

list_del corruption, ffff888021297e00->prev is LIST_POISON2 (dead000000000122)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:61!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 UID: 0 PID: 5896 Comm: syz-executor213 Not tainted 6.14.0-rc1-next-20250204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS:  00007f7ace6686c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7aceeeb1d0 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __list_del_entry_valid include/linux/list.h:124 [inline]
 __list_del_entry include/linux/list.h:215 [inline]
 list_del_rcu include/linux/rculist.h:168 [inline]
 hci_chan_del+0x70/0x1b0 net/bluetooth/hci_conn.c:2858
 l2cap_conn_free net/bluetooth/l2cap_core.c:1816 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_conn_put+0x70/0xe0 net/bluetooth/l2cap_core.c:1830
 l2cap_sock_shutdown+0xa8a/0x1020 net/bluetooth/l2cap_sock.c:1377
 l2cap_sock_release+0x79/0x1d0 net/bluetooth/l2cap_sock.c:1416
 __sock_release net/socket.c:642 [inline]
 sock_close+0xbc/0x240 net/socket.c:1393
 __fput+0x3e9/0x9f0 fs/file_table.c:448
 task_work_run+0x24f/0x310 kernel/task_work.c:227
 ptrace_notify+0x2d2/0x380 kernel/signal.c:2522
 ptrace_report_syscall include/linux/ptrace.h:415 [inline]
 ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
 syscall_exit_work+0xc7/0x1d0 kernel/entry/common.c:173
 syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
 __syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
 syscall_exit_to_user_mode+0x24a/0x340 kernel/entry/common.c:218
 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7aceeaf449
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7ace668218 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffffc RBX: 00007f7acef39328 RCX: 00007f7aceeaf449
RDX: 000000000000000e RSI: 0000000020000100 RDI: 0000000000000004
RBP: 00007f7acef39320 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000004 R14: 00007f7ace668670 R15: 000000000000000b
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:__list_del_entry_valid_or_report+0x12c/0x190 lib/list_debug.c:59
Code: 8c 4c 89 fe 48 89 da e8 32 8c 37 fc 90 0f 0b 48 89 df e8 27 9f 14 fd 48 c7 c7 a0 c0 60 8c 4c 89 fe 48 89 da e8 15 8c 37 fc 90 <0f> 0b 4c 89 e7 e8 0a 9f 14 fd 42 80 3c 2b 00 74 08 4c 89 e7 e8 cb
RSP: 0018:ffffc90003f6f998 EFLAGS: 00010246
RAX: 000000000000004e RBX: dead000000000122 RCX: 01454d423f7fbf00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff819f077c R09: 1ffff920007eded0
R10: dffffc0000000000 R11: fffff520007eded1 R12: dead000000000122
R13: dffffc0000000000 R14: ffff8880352248d8 R15: ffff888021297e00
FS:  00007f7ace6686c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7acef05b08 CR3: 000000003527c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Reported-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Tested-by: syzbot+10bd8fe6741eedd2be2e@syzkaller.appspotmail.com
Fixes: b4f82f9ed43a ("Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/bluetooth/l2cap.h |    3 
 net/bluetooth/l2cap_core.c    |  138 ++++++++++++++----------------------------
 net/bluetooth/l2cap_sock.c    |   15 ++--
 3 files changed, 58 insertions(+), 98 deletions(-)

--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -662,7 +662,7 @@ struct l2cap_conn {
 	struct l2cap_chan	*smp;
 
 	struct list_head	chan_l;
-	struct mutex		chan_lock;
+	struct mutex		lock;
 	struct kref		ref;
 	struct list_head	users;
 };
@@ -968,6 +968,7 @@ void l2cap_logical_cfm(struct l2cap_chan
 void __l2cap_physical_cfm(struct l2cap_chan *chan, int result);
 
 struct l2cap_conn *l2cap_conn_get(struct l2cap_conn *conn);
+struct l2cap_conn *l2cap_conn_hold_unless_zero(struct l2cap_conn *conn);
 void l2cap_conn_put(struct l2cap_conn *conn);
 
 int l2cap_register_user(struct l2cap_conn *conn, struct l2cap_user *user);
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -119,7 +119,6 @@ static struct l2cap_chan *l2cap_get_chan
 {
 	struct l2cap_chan *c;
 
-	mutex_lock(&conn->chan_lock);
 	c = __l2cap_get_chan_by_scid(conn, cid);
 	if (c) {
 		/* Only lock if chan reference is not 0 */
@@ -127,7 +126,6 @@ static struct l2cap_chan *l2cap_get_chan
 		if (c)
 			l2cap_chan_lock(c);
 	}
-	mutex_unlock(&conn->chan_lock);
 
 	return c;
 }
@@ -140,7 +138,6 @@ static struct l2cap_chan *l2cap_get_chan
 {
 	struct l2cap_chan *c;
 
-	mutex_lock(&conn->chan_lock);
 	c = __l2cap_get_chan_by_dcid(conn, cid);
 	if (c) {
 		/* Only lock if chan reference is not 0 */
@@ -148,7 +145,6 @@ static struct l2cap_chan *l2cap_get_chan
 		if (c)
 			l2cap_chan_lock(c);
 	}
-	mutex_unlock(&conn->chan_lock);
 
 	return c;
 }
@@ -418,7 +414,7 @@ static void l2cap_chan_timeout(struct wo
 	if (!conn)
 		return;
 
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 	/* __set_chan_timer() calls l2cap_chan_hold(chan) while scheduling
 	 * this work. No need to call l2cap_chan_hold(chan) here again.
 	 */
@@ -439,7 +435,7 @@ static void l2cap_chan_timeout(struct wo
 	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 }
 
 struct l2cap_chan *l2cap_chan_create(void)
@@ -642,9 +638,9 @@ void __l2cap_chan_add(struct l2cap_conn
 
 void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan)
 {
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 	__l2cap_chan_add(conn, chan);
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 }
 
 void l2cap_chan_del(struct l2cap_chan *chan, int err)
@@ -732,9 +728,9 @@ void l2cap_chan_list(struct l2cap_conn *
 	if (!conn)
 		return;
 
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 	__l2cap_chan_list(conn, func, data);
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 }
 
 EXPORT_SYMBOL_GPL(l2cap_chan_list);
@@ -746,7 +742,7 @@ static void l2cap_conn_update_id_addr(st
 	struct hci_conn *hcon = conn->hcon;
 	struct l2cap_chan *chan;
 
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 
 	list_for_each_entry(chan, &conn->chan_l, list) {
 		l2cap_chan_lock(chan);
@@ -755,7 +751,7 @@ static void l2cap_conn_update_id_addr(st
 		l2cap_chan_unlock(chan);
 	}
 
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 }
 
 static void l2cap_chan_le_connect_reject(struct l2cap_chan *chan)
@@ -1508,8 +1504,6 @@ static void l2cap_conn_start(struct l2ca
 
 	BT_DBG("conn %p", conn);
 
-	mutex_lock(&conn->chan_lock);
-
 	list_for_each_entry_safe(chan, tmp, &conn->chan_l, list) {
 		l2cap_chan_lock(chan);
 
@@ -1578,8 +1572,6 @@ static void l2cap_conn_start(struct l2ca
 
 		l2cap_chan_unlock(chan);
 	}
-
-	mutex_unlock(&conn->chan_lock);
 }
 
 static void l2cap_le_conn_ready(struct l2cap_conn *conn)
@@ -1625,7 +1617,7 @@ static void l2cap_conn_ready(struct l2ca
 	if (hcon->type == ACL_LINK)
 		l2cap_request_info(conn);
 
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 
 	list_for_each_entry(chan, &conn->chan_l, list) {
 
@@ -1643,7 +1635,7 @@ static void l2cap_conn_ready(struct l2ca
 		l2cap_chan_unlock(chan);
 	}
 
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 
 	if (hcon->type == LE_LINK)
 		l2cap_le_conn_ready(conn);
@@ -1658,14 +1650,10 @@ static void l2cap_conn_unreliable(struct
 
 	BT_DBG("conn %p", conn);
 
-	mutex_lock(&conn->chan_lock);
-
 	list_for_each_entry(chan, &conn->chan_l, list) {
 		if (test_bit(FLAG_FORCE_RELIABLE, &chan->flags))
 			l2cap_chan_set_err(chan, err);
 	}
-
-	mutex_unlock(&conn->chan_lock);
 }
 
 static void l2cap_info_timeout(struct work_struct *work)
@@ -1676,7 +1664,9 @@ static void l2cap_info_timeout(struct wo
 	conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
 	conn->info_ident = 0;
 
+	mutex_lock(&conn->lock);
 	l2cap_conn_start(conn);
+	mutex_unlock(&conn->lock);
 }
 
 /*
@@ -1768,6 +1758,8 @@ static void l2cap_conn_del(struct hci_co
 
 	BT_DBG("hcon %p conn %p, err %d", hcon, conn, err);
 
+	mutex_lock(&conn->lock);
+
 	kfree_skb(conn->rx_skb);
 
 	skb_queue_purge(&conn->pending_rx);
@@ -1786,8 +1778,6 @@ static void l2cap_conn_del(struct hci_co
 	/* Force the connection to be immediately dropped */
 	hcon->disc_timeout = 0;
 
-	mutex_lock(&conn->chan_lock);
-
 	/* Kill channels */
 	list_for_each_entry_safe(chan, l, &conn->chan_l, list) {
 		l2cap_chan_hold(chan);
@@ -1801,12 +1791,14 @@ static void l2cap_conn_del(struct hci_co
 		l2cap_chan_put(chan);
 	}
 
-	mutex_unlock(&conn->chan_lock);
-
 	if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
 		cancel_delayed_work_sync(&conn->info_timer);
 
+	hci_chan_del(conn->hchan);
+	conn->hchan = NULL;
+
 	hcon->l2cap_data = NULL;
+	mutex_unlock(&conn->lock);
 	l2cap_conn_put(conn);
 }
 
@@ -1814,7 +1806,6 @@ static void l2cap_conn_free(struct kref
 {
 	struct l2cap_conn *conn = container_of(ref, struct l2cap_conn, ref);
 
-	hci_chan_del(conn->hchan);
 	hci_conn_put(conn->hcon);
 	kfree(conn);
 }
@@ -2925,8 +2916,6 @@ static void l2cap_raw_recv(struct l2cap_
 
 	BT_DBG("conn %p", conn);
 
-	mutex_lock(&conn->chan_lock);
-
 	list_for_each_entry(chan, &conn->chan_l, list) {
 		if (chan->chan_type != L2CAP_CHAN_RAW)
 			continue;
@@ -2941,8 +2930,6 @@ static void l2cap_raw_recv(struct l2cap_
 		if (chan->ops->recv(chan, nskb))
 			kfree_skb(nskb);
 	}
-
-	mutex_unlock(&conn->chan_lock);
 }
 
 /* ---- L2CAP signalling commands ---- */
@@ -3963,7 +3950,6 @@ static void l2cap_connect(struct l2cap_c
 		goto response;
 	}
 
-	mutex_lock(&conn->chan_lock);
 	l2cap_chan_lock(pchan);
 
 	/* Check if the ACL is secure enough (if not SDP) */
@@ -4070,7 +4056,6 @@ response:
 	}
 
 	l2cap_chan_unlock(pchan);
-	mutex_unlock(&conn->chan_lock);
 	l2cap_chan_put(pchan);
 }
 
@@ -4109,27 +4094,19 @@ static int l2cap_connect_create_rsp(stru
 	BT_DBG("dcid 0x%4.4x scid 0x%4.4x result 0x%2.2x status 0x%2.2x",
 	       dcid, scid, result, status);
 
-	mutex_lock(&conn->chan_lock);
-
 	if (scid) {
 		chan = __l2cap_get_chan_by_scid(conn, scid);
-		if (!chan) {
-			err = -EBADSLT;
-			goto unlock;
-		}
+		if (!chan)
+			return -EBADSLT;
 	} else {
 		chan = __l2cap_get_chan_by_ident(conn, cmd->ident);
-		if (!chan) {
-			err = -EBADSLT;
-			goto unlock;
-		}
+		if (!chan)
+			return -EBADSLT;
 	}
 
 	chan = l2cap_chan_hold_unless_zero(chan);
-	if (!chan) {
-		err = -EBADSLT;
-		goto unlock;
-	}
+	if (!chan)
+		return -EBADSLT;
 
 	err = 0;
 
@@ -4167,9 +4144,6 @@ static int l2cap_connect_create_rsp(stru
 	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
-unlock:
-	mutex_unlock(&conn->chan_lock);
-
 	return err;
 }
 
@@ -4457,11 +4431,7 @@ static inline int l2cap_disconnect_req(s
 
 	chan->ops->set_shutdown(chan);
 
-	l2cap_chan_unlock(chan);
-	mutex_lock(&conn->chan_lock);
-	l2cap_chan_lock(chan);
 	l2cap_chan_del(chan, ECONNRESET);
-	mutex_unlock(&conn->chan_lock);
 
 	chan->ops->close(chan);
 
@@ -4498,11 +4468,7 @@ static inline int l2cap_disconnect_rsp(s
 		return 0;
 	}
 
-	l2cap_chan_unlock(chan);
-	mutex_lock(&conn->chan_lock);
-	l2cap_chan_lock(chan);
 	l2cap_chan_del(chan, 0);
-	mutex_unlock(&conn->chan_lock);
 
 	chan->ops->close(chan);
 
@@ -4700,13 +4666,9 @@ static int l2cap_le_connect_rsp(struct l
 	BT_DBG("dcid 0x%4.4x mtu %u mps %u credits %u result 0x%2.2x",
 	       dcid, mtu, mps, credits, result);
 
-	mutex_lock(&conn->chan_lock);
-
 	chan = __l2cap_get_chan_by_ident(conn, cmd->ident);
-	if (!chan) {
-		err = -EBADSLT;
-		goto unlock;
-	}
+	if (!chan)
+		return -EBADSLT;
 
 	err = 0;
 
@@ -4754,9 +4716,6 @@ static int l2cap_le_connect_rsp(struct l
 
 	l2cap_chan_unlock(chan);
 
-unlock:
-	mutex_unlock(&conn->chan_lock);
-
 	return err;
 }
 
@@ -4868,7 +4827,6 @@ static int l2cap_le_connect_req(struct l
 		goto response;
 	}
 
-	mutex_lock(&conn->chan_lock);
 	l2cap_chan_lock(pchan);
 
 	if (!smp_sufficient_security(conn->hcon, pchan->sec_level,
@@ -4934,7 +4892,6 @@ static int l2cap_le_connect_req(struct l
 
 response_unlock:
 	l2cap_chan_unlock(pchan);
-	mutex_unlock(&conn->chan_lock);
 	l2cap_chan_put(pchan);
 
 	if (result == L2CAP_CR_PEND)
@@ -5071,7 +5028,6 @@ static inline int l2cap_ecred_conn_req(s
 		goto response;
 	}
 
-	mutex_lock(&conn->chan_lock);
 	l2cap_chan_lock(pchan);
 
 	if (!smp_sufficient_security(conn->hcon, pchan->sec_level,
@@ -5146,7 +5102,6 @@ static inline int l2cap_ecred_conn_req(s
 
 unlock:
 	l2cap_chan_unlock(pchan);
-	mutex_unlock(&conn->chan_lock);
 	l2cap_chan_put(pchan);
 
 response:
@@ -5183,8 +5138,6 @@ static inline int l2cap_ecred_conn_rsp(s
 	BT_DBG("mtu %u mps %u credits %u result 0x%4.4x", mtu, mps, credits,
 	       result);
 
-	mutex_lock(&conn->chan_lock);
-
 	cmd_len -= sizeof(*rsp);
 
 	list_for_each_entry_safe(chan, tmp, &conn->chan_l, list) {
@@ -5270,8 +5223,6 @@ static inline int l2cap_ecred_conn_rsp(s
 		l2cap_chan_unlock(chan);
 	}
 
-	mutex_unlock(&conn->chan_lock);
-
 	return err;
 }
 
@@ -5384,8 +5335,6 @@ static inline int l2cap_le_command_rej(s
 	if (cmd_len < sizeof(*rej))
 		return -EPROTO;
 
-	mutex_lock(&conn->chan_lock);
-
 	chan = __l2cap_get_chan_by_ident(conn, cmd->ident);
 	if (!chan)
 		goto done;
@@ -5400,7 +5349,6 @@ static inline int l2cap_le_command_rej(s
 	l2cap_chan_put(chan);
 
 done:
-	mutex_unlock(&conn->chan_lock);
 	return 0;
 }
 
@@ -6855,8 +6803,12 @@ static void process_pending_rx(struct wo
 
 	BT_DBG("");
 
+	mutex_lock(&conn->lock);
+
 	while ((skb = skb_dequeue(&conn->pending_rx)))
 		l2cap_recv_frame(conn, skb);
+
+	mutex_unlock(&conn->lock);
 }
 
 static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon)
@@ -6895,7 +6847,7 @@ static struct l2cap_conn *l2cap_conn_add
 		conn->local_fixed_chan |= L2CAP_FC_SMP_BREDR;
 
 	mutex_init(&conn->ident_lock);
-	mutex_init(&conn->chan_lock);
+	mutex_init(&conn->lock);
 
 	INIT_LIST_HEAD(&conn->chan_l);
 	INIT_LIST_HEAD(&conn->users);
@@ -7088,7 +7040,7 @@ int l2cap_chan_connect(struct l2cap_chan
 		}
 	}
 
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 	l2cap_chan_lock(chan);
 
 	if (cid && __l2cap_get_chan_by_dcid(conn, cid)) {
@@ -7129,7 +7081,7 @@ int l2cap_chan_connect(struct l2cap_chan
 
 chan_unlock:
 	l2cap_chan_unlock(chan);
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 done:
 	hci_dev_unlock(hdev);
 	hci_dev_put(hdev);
@@ -7345,7 +7297,7 @@ static void l2cap_security_cfm(struct hc
 
 	BT_DBG("conn %p status 0x%2.2x encrypt %u", conn, status, encrypt);
 
-	mutex_lock(&conn->chan_lock);
+	mutex_lock(&conn->lock);
 
 	list_for_each_entry(chan, &conn->chan_l, list) {
 		l2cap_chan_lock(chan);
@@ -7419,7 +7371,7 @@ static void l2cap_security_cfm(struct hc
 		l2cap_chan_unlock(chan);
 	}
 
-	mutex_unlock(&conn->chan_lock);
+	mutex_unlock(&conn->lock);
 }
 
 /* Append fragment into frame respecting the maximum len of rx_skb */
@@ -7486,8 +7438,11 @@ static void l2cap_recv_reset(struct l2ca
 	conn->rx_len = 0;
 }
 
-static struct l2cap_conn *l2cap_conn_hold_unless_zero(struct l2cap_conn *c)
+struct l2cap_conn *l2cap_conn_hold_unless_zero(struct l2cap_conn *c)
 {
+	if (!c)
+		return NULL;
+
 	BT_DBG("conn %p orig refcnt %u", c, kref_read(&c->ref));
 
 	if (!kref_get_unless_zero(&c->ref))
@@ -7513,11 +7468,15 @@ void l2cap_recv_acldata(struct hci_conn
 
 	hci_dev_unlock(hcon->hdev);
 
-	if (!conn)
-		goto drop;
+	if (!conn) {
+		kfree_skb(skb);
+		return;
+	}
 
 	BT_DBG("conn %p len %u flags 0x%x", conn, skb->len, flags);
 
+	mutex_lock(&conn->lock);
+
 	switch (flags) {
 	case ACL_START:
 	case ACL_START_NO_FLUSH:
@@ -7542,7 +7501,7 @@ void l2cap_recv_acldata(struct hci_conn
 		if (len == skb->len) {
 			/* Complete frame received */
 			l2cap_recv_frame(conn, skb);
-			return;
+			goto unlock;
 		}
 
 		BT_DBG("Start: total len %d, frag len %u", len, skb->len);
@@ -7604,10 +7563,11 @@ void l2cap_recv_acldata(struct hci_conn
 		break;
 	}
 
-	l2cap_conn_put(conn);
-
 drop:
 	kfree_skb(skb);
+unlock:
+	mutex_unlock(&conn->lock);
+	l2cap_conn_put(conn);
 }
 
 static struct hci_cb l2cap_cb = {
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1323,9 +1323,10 @@ static int l2cap_sock_shutdown(struct so
 	/* prevent sk structure from being freed whilst unlocked */
 	sock_hold(sk);
 
-	chan = l2cap_pi(sk)->chan;
 	/* prevent chan structure from being freed whilst unlocked */
-	l2cap_chan_hold(chan);
+	chan = l2cap_chan_hold_unless_zero(l2cap_pi(sk)->chan);
+	if (!chan)
+		goto shutdown_already;
 
 	BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
 
@@ -1355,22 +1356,20 @@ static int l2cap_sock_shutdown(struct so
 	release_sock(sk);
 
 	l2cap_chan_lock(chan);
-	conn = chan->conn;
-	if (conn)
-		/* prevent conn structure from being freed */
-		l2cap_conn_get(conn);
+	/* prevent conn structure from being freed */
+	conn = l2cap_conn_hold_unless_zero(chan->conn);
 	l2cap_chan_unlock(chan);
 
 	if (conn)
 		/* mutex lock must be taken before l2cap_chan_lock() */
-		mutex_lock(&conn->chan_lock);
+		mutex_lock(&conn->lock);
 
 	l2cap_chan_lock(chan);
 	l2cap_chan_close(chan, 0);
 	l2cap_chan_unlock(chan);
 
 	if (conn) {
-		mutex_unlock(&conn->chan_lock);
+		mutex_unlock(&conn->lock);
 		l2cap_conn_put(conn);
 	}
 

[PATCH 6.6 160/166] nvme-fc: rely on state transitions to handle connectivity loss

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Wagner <wagi@kernel.org>

commit f13409bb3f9140dad7256febcb478f0c9600312c upstream.

It's not possible to call nvme_state_ctrl_state with holding a spin
lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync
when fastfail is enabled.

Instead syncing the ASSOC_FLAG and state transitions using a lock, it's
possible to only rely on the state machine transitions. That means
nvme_fc_ctrl_connectivity_loss should unconditionally call
nvme_reset_ctrl which avoids the read race on the ctrl state variable.
Actually, it's not necessary to test in which state the ctrl is, the
reset work will only scheduled when the state machine is in LIVE state.

In nvme_fc_create_association, the LIVE state can only be entered if it
was previously CONNECTING. If this is not possible then the reset
handler got triggered. Thus just error out here.

Fixes: ee59e3820ca9 ("nvme-fc: do not ignore connectivity loss during connecting")
Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/fc.c |   67 ++++---------------------------------------------
 1 file changed, 6 insertions(+), 61 deletions(-)

--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -782,61 +782,12 @@ restart:
 static void
 nvme_fc_ctrl_connectivity_loss(struct nvme_fc_ctrl *ctrl)
 {
-	enum nvme_ctrl_state state;
-	unsigned long flags;
-
 	dev_info(ctrl->ctrl.device,
 		"NVME-FC{%d}: controller connectivity lost. Awaiting "
 		"Reconnect", ctrl->cnum);
 
-	spin_lock_irqsave(&ctrl->lock, flags);
 	set_bit(ASSOC_FAILED, &ctrl->flags);
-	state = nvme_ctrl_state(&ctrl->ctrl);
-	spin_unlock_irqrestore(&ctrl->lock, flags);
-
-	switch (state) {
-	case NVME_CTRL_NEW:
-	case NVME_CTRL_LIVE:
-		/*
-		 * Schedule a controller reset. The reset will terminate the
-		 * association and schedule the reconnect timer.  Reconnects
-		 * will be attempted until either the ctlr_loss_tmo
-		 * (max_retries * connect_delay) expires or the remoteport's
-		 * dev_loss_tmo expires.
-		 */
-		if (nvme_reset_ctrl(&ctrl->ctrl)) {
-			dev_warn(ctrl->ctrl.device,
-				"NVME-FC{%d}: Couldn't schedule reset.\n",
-				ctrl->cnum);
-			nvme_delete_ctrl(&ctrl->ctrl);
-		}
-		break;
-
-	case NVME_CTRL_CONNECTING:
-		/*
-		 * The association has already been terminated and the
-		 * controller is attempting reconnects.  No need to do anything
-		 * futher.  Reconnects will be attempted until either the
-		 * ctlr_loss_tmo (max_retries * connect_delay) expires or the
-		 * remoteport's dev_loss_tmo expires.
-		 */
-		break;
-
-	case NVME_CTRL_RESETTING:
-		/*
-		 * Controller is already in the process of terminating the
-		 * association.  No need to do anything further. The reconnect
-		 * step will kick in naturally after the association is
-		 * terminated.
-		 */
-		break;
-
-	case NVME_CTRL_DELETING:
-	case NVME_CTRL_DELETING_NOIO:
-	default:
-		/* no action to take - let it delete */
-		break;
-	}
+	nvme_reset_ctrl(&ctrl->ctrl);
 }
 
 /**
@@ -3070,7 +3021,6 @@ nvme_fc_create_association(struct nvme_f
 	struct nvmefc_ls_rcv_op *disls = NULL;
 	unsigned long flags;
 	int ret;
-	bool changed;
 
 	++ctrl->ctrl.nr_reconnects;
 
@@ -3175,23 +3125,18 @@ nvme_fc_create_association(struct nvme_f
 		else
 			ret = nvme_fc_recreate_io_queues(ctrl);
 	}
+	if (!ret && test_bit(ASSOC_FAILED, &ctrl->flags))
+		ret = -EIO;
 	if (ret)
 		goto out_term_aen_ops;
 
-	spin_lock_irqsave(&ctrl->lock, flags);
-	if (!test_bit(ASSOC_FAILED, &ctrl->flags))
-		changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE);
-	else
+	if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE)) {
 		ret = -EIO;
-	spin_unlock_irqrestore(&ctrl->lock, flags);
-
-	if (ret)
 		goto out_term_aen_ops;
+	}
 
 	ctrl->ctrl.nr_reconnects = 0;
-
-	if (changed)
-		nvme_start_ctrl(&ctrl->ctrl);
+	nvme_start_ctrl(&ctrl->ctrl);
 
 	return 0;	/* Success */
 

[PATCH 6.6 161/166] HID: apple: disable Fn key handling on the Omoton KB066

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Henrie <alexhenrie24@gmail.com>

commit 221cea1003d8a412e5ec64a58df7ab19b654f490 upstream.

Remove the fixup to make the Omoton KB066's F6 key F6 when not holding
Fn. That was really just a hack to allow typing F6 in fnmode>0, and it
didn't fix any of the other F keys that were likewise untypable in
fnmode>0. Instead, because the Omoton's Fn key is entirely internal to
the keyboard, completely disable Fn key translation when an Omoton is
detected, which will prevent the hid-apple driver from interfering with
the keyboard's built-in Fn key handling. All of the F keys, including
F6, are then typable when Fn is held.

The Omoton KB066 and the Apple A1255 both have HID product code
05ac:022c. The self-reported name of every original A1255 when they left
the factory was "Apple Wireless Keyboard". By default, Mac OS changes
the name to "<username>'s keyboard" when pairing with the keyboard, but
Mac OS allows the user to set the internal name of Apple keyboards to
anything they like. The Omoton KB066's name, on the other hand, is not
configurable: It is always "Bluetooth Keyboard". Because that name is so
generic that a user might conceivably use the same name for a real Apple
keyboard, detect Omoton keyboards based on both having that exact name
and having HID product code 022c.

Fixes: 819083cb6eed ("HID: apple: fix up the F6 key on the Omoton KB066 keyboard")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-apple.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -363,6 +363,12 @@ static bool apple_is_non_apple_keyboard(
 	return false;
 }
 
+static bool apple_is_omoton_kb066(struct hid_device *hdev)
+{
+	return hdev->product == USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI &&
+		strcmp(hdev->name, "Bluetooth Keyboard") == 0;
+}
+
 static inline void apple_setup_key_translation(struct input_dev *input,
 		const struct apple_key_translation *table)
 {
@@ -531,9 +537,6 @@ static int hidinput_apple_event(struct h
 		}
 	}
 
-	if (usage->hid == 0xc0301) /* Omoton KB066 quirk */
-		code = KEY_F6;
-
 	if (usage->code != code) {
 		input_event_with_scancode(input, usage->type, code, usage->hid, value);
 
@@ -713,7 +716,7 @@ static int apple_input_configured(struct
 {
 	struct apple_sc *asc = hid_get_drvdata(hdev);
 
-	if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) {
+	if (((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) || apple_is_omoton_kb066(hdev)) {
 		hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n");
 		asc->quirks &= ~APPLE_HAS_FN;
 	}

[PATCH 6.6 162/166] nvme-tcp: Fix a C2HTermReq error message

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maurizio Lombardi <mlombard@redhat.com>

commit afb41b08c44e5386f2f52fa859010ac4afd2b66f upstream.

In H2CTermReq, a FES with value 0x05 means "R2T Limit Exceeded"; but
in C2HTermReq the same value has a different meaning (Data Transfer Limit
Exceeded).

Fixes: 84e009042d0f ("nvme-tcp: add basic support for the C2HTermReq PDU")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/tcp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -719,7 +719,7 @@ static void nvme_tcp_handle_c2h_term(str
 		[NVME_TCP_FES_PDU_SEQ_ERR] = "PDU Sequence Error",
 		[NVME_TCP_FES_HDR_DIGEST_ERR] = "Header Digest Error",
 		[NVME_TCP_FES_DATA_OUT_OF_RANGE] = "Data Transfer Out Of Range",
-		[NVME_TCP_FES_R2T_LIMIT_EXCEEDED] = "R2T Limit Exceeded",
+		[NVME_TCP_FES_DATA_LIMIT_EXCEEDED] = "Data Transfer Limit Exceeded",
 		[NVME_TCP_FES_UNSUPPORTED_PARAM] = "Unsupported Parameter",
 	};
 

[PATCH 6.6 163/166] rust: lockdep: Remove support for dynamically allocated LockClassKeys

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mitchell Levy <levymitchell0@gmail.com>

commit 966944f3711665db13e214fef6d02982c49bb972 upstream.

Currently, dynamically allocated LockCLassKeys can be used from the Rust
side without having them registered. This is a soundness issue, so
remove them.

Fixes: 6ea5aa08857a ("rust: sync: introduce `LockClassKey`")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307232717.1759087-11-boqun.feng@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 rust/kernel/sync.rs |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/rust/kernel/sync.rs
+++ b/rust/kernel/sync.rs
@@ -26,11 +26,6 @@ pub struct LockClassKey(Opaque<bindings:
 unsafe impl Sync for LockClassKey {}
 
 impl LockClassKey {
-    /// Creates a new lock class key.
-    pub const fn new() -> Self {
-        Self(Opaque::uninit())
-    }
-
     pub(crate) fn as_ptr(&self) -> *mut bindings::lock_class_key {
         self.0.get()
     }
@@ -41,7 +36,10 @@ impl LockClassKey {
 #[macro_export]
 macro_rules! static_lock_class {
     () => {{
-        static CLASS: $crate::sync::LockClassKey = $crate::sync::LockClassKey::new();
+        static CLASS: $crate::sync::LockClassKey =
+            // SAFETY: lockdep expects uninitialized memory when it's handed a statically allocated
+            // lock_class_key
+            unsafe { ::core::mem::MaybeUninit::uninit().assume_init() };
         &CLASS
     }};
 }

[PATCH 6.6 164/166] netfilter: nf_tables: use timestamp to check for set element timeout

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 7395dfacfff65e9938ac0889dafa1ab01e987d15 upstream.

Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.

Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.

.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.

Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/netfilter/nf_tables.h |   16 ++++++++++++++--
 net/netfilter/nf_tables_api.c     |    4 +++-
 net/netfilter/nft_set_hash.c      |    8 +++++++-
 net/netfilter/nft_set_pipapo.c    |   18 +++++++++++-------
 net/netfilter/nft_set_rbtree.c    |   11 +++++++----
 5 files changed, 42 insertions(+), 15 deletions(-)

--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -826,10 +826,16 @@ static inline struct nft_set_elem_expr *
 	return nft_set_ext(ext, NFT_SET_EXT_EXPRESSIONS);
 }
 
-static inline bool nft_set_elem_expired(const struct nft_set_ext *ext)
+static inline bool __nft_set_elem_expired(const struct nft_set_ext *ext,
+					  u64 tstamp)
 {
 	return nft_set_ext_exists(ext, NFT_SET_EXT_EXPIRATION) &&
-	       time_is_before_eq_jiffies64(*nft_set_ext_expiration(ext));
+	       time_after_eq64(tstamp, *nft_set_ext_expiration(ext));
+}
+
+static inline bool nft_set_elem_expired(const struct nft_set_ext *ext)
+{
+	return __nft_set_elem_expired(ext, get_jiffies_64());
 }
 
 static inline struct nft_set_ext *nft_set_elem_ext(const struct nft_set *set,
@@ -1791,6 +1797,7 @@ struct nftables_pernet {
 	struct list_head	notify_list;
 	struct mutex		commit_mutex;
 	u64			table_handle;
+	u64			tstamp;
 	unsigned int		base_seq;
 	unsigned int		gc_seq;
 	u8			validate_state;
@@ -1803,6 +1810,11 @@ static inline struct nftables_pernet *nf
 	return net_generic(net, nf_tables_net_id);
 }
 
+static inline u64 nft_net_tstamp(const struct net *net)
+{
+	return nft_pernet(net)->tstamp;
+}
+
 #define __NFT_REDUCE_READONLY	1UL
 #define NFT_REDUCE_READONLY	(void *)__NFT_REDUCE_READONLY
 
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -9963,6 +9963,7 @@ dead_elem:
 struct nft_trans_gc *nft_trans_gc_catchall_sync(struct nft_trans_gc *gc)
 {
 	struct nft_set_elem_catchall *catchall, *next;
+	u64 tstamp = nft_net_tstamp(gc->net);
 	const struct nft_set *set = gc->set;
 	struct nft_set_elem elem;
 	struct nft_set_ext *ext;
@@ -9972,7 +9973,7 @@ struct nft_trans_gc *nft_trans_gc_catcha
 	list_for_each_entry_safe(catchall, next, &set->catchall_list, list) {
 		ext = nft_set_elem_ext(set, catchall->elem);
 
-		if (!nft_set_elem_expired(ext))
+		if (!__nft_set_elem_expired(ext, tstamp))
 			continue;
 
 		gc = nft_trans_gc_queue_sync(gc, GFP_KERNEL);
@@ -10777,6 +10778,7 @@ static bool nf_tables_valid_genid(struct
 	bool genid_ok;
 
 	mutex_lock(&nft_net->commit_mutex);
+	nft_net->tstamp = get_jiffies_64();
 
 	genid_ok = genid == 0 || nft_net->base_seq == genid;
 	if (!genid_ok)
--- a/net/netfilter/nft_set_hash.c
+++ b/net/netfilter/nft_set_hash.c
@@ -37,6 +37,7 @@ struct nft_rhash_cmp_arg {
 	const struct nft_set		*set;
 	const u32			*key;
 	u8				genmask;
+	u64				tstamp;
 };
 
 static inline u32 nft_rhash_key(const void *data, u32 len, u32 seed)
@@ -63,7 +64,7 @@ static inline int nft_rhash_cmp(struct r
 		return 1;
 	if (nft_set_elem_is_dead(&he->ext))
 		return 1;
-	if (nft_set_elem_expired(&he->ext))
+	if (__nft_set_elem_expired(&he->ext, x->tstamp))
 		return 1;
 	if (!nft_set_elem_active(&he->ext, x->genmask))
 		return 1;
@@ -88,6 +89,7 @@ bool nft_rhash_lookup(const struct net *
 		.genmask = nft_genmask_cur(net),
 		.set	 = set,
 		.key	 = key,
+		.tstamp  = get_jiffies_64(),
 	};
 
 	he = rhashtable_lookup(&priv->ht, &arg, nft_rhash_params);
@@ -106,6 +108,7 @@ static void *nft_rhash_get(const struct
 		.genmask = nft_genmask_cur(net),
 		.set	 = set,
 		.key	 = elem->key.val.data,
+		.tstamp  = get_jiffies_64(),
 	};
 
 	he = rhashtable_lookup(&priv->ht, &arg, nft_rhash_params);
@@ -129,6 +132,7 @@ static bool nft_rhash_update(struct nft_
 		.genmask = NFT_GENMASK_ANY,
 		.set	 = set,
 		.key	 = key,
+		.tstamp  = get_jiffies_64(),
 	};
 
 	he = rhashtable_lookup(&priv->ht, &arg, nft_rhash_params);
@@ -172,6 +176,7 @@ static int nft_rhash_insert(const struct
 		.genmask = nft_genmask_next(net),
 		.set	 = set,
 		.key	 = elem->key.val.data,
+		.tstamp	 = nft_net_tstamp(net),
 	};
 	struct nft_rhash_elem *prev;
 
@@ -214,6 +219,7 @@ static void *nft_rhash_deactivate(const
 		.genmask = nft_genmask_next(net),
 		.set	 = set,
 		.key	 = elem->key.val.data,
+		.tstamp	 = nft_net_tstamp(net),
 	};
 
 	rcu_read_lock();
--- a/net/netfilter/nft_set_pipapo.c
+++ b/net/netfilter/nft_set_pipapo.c
@@ -504,6 +504,7 @@ out:
  * @set:	nftables API set representation
  * @data:	Key data to be matched against existing elements
  * @genmask:	If set, check that element is active in given genmask
+ * @tstamp:	timestamp to check for expired elements
  *
  * This is essentially the same as the lookup function, except that it matches
  * key data against the uncommitted copy and doesn't use preallocated maps for
@@ -513,7 +514,8 @@ out:
  */
 static struct nft_pipapo_elem *pipapo_get(const struct net *net,
 					  const struct nft_set *set,
-					  const u8 *data, u8 genmask)
+					  const u8 *data, u8 genmask,
+					  u64 tstamp)
 {
 	struct nft_pipapo_elem *ret = ERR_PTR(-ENOENT);
 	struct nft_pipapo *priv = nft_set_priv(set);
@@ -568,7 +570,7 @@ next_match:
 			goto out;
 
 		if (last) {
-			if (nft_set_elem_expired(&f->mt[b].e->ext))
+			if (__nft_set_elem_expired(&f->mt[b].e->ext, tstamp))
 				goto next_match;
 			if ((genmask &&
 			     !nft_set_elem_active(&f->mt[b].e->ext, genmask)))
@@ -605,7 +607,7 @@ static void *nft_pipapo_get(const struct
 			    const struct nft_set_elem *elem, unsigned int flags)
 {
 	return pipapo_get(net, set, (const u8 *)elem->key.val.data,
-			 nft_genmask_cur(net));
+			 nft_genmask_cur(net), get_jiffies_64());
 }
 
 /**
@@ -1199,6 +1201,7 @@ static int nft_pipapo_insert(const struc
 	struct nft_pipapo *priv = nft_set_priv(set);
 	struct nft_pipapo_match *m = priv->clone;
 	u8 genmask = nft_genmask_next(net);
+	u64 tstamp = nft_net_tstamp(net);
 	struct nft_pipapo_field *f;
 	const u8 *start_p, *end_p;
 	int i, bsize_max, err = 0;
@@ -1208,7 +1211,7 @@ static int nft_pipapo_insert(const struc
 	else
 		end = start;
 
-	dup = pipapo_get(net, set, start, genmask);
+	dup = pipapo_get(net, set, start, genmask, tstamp);
 	if (!IS_ERR(dup)) {
 		/* Check if we already have the same exact entry */
 		const struct nft_data *dup_key, *dup_end;
@@ -1230,7 +1233,7 @@ static int nft_pipapo_insert(const struc
 
 	if (PTR_ERR(dup) == -ENOENT) {
 		/* Look for partially overlapping entries */
-		dup = pipapo_get(net, set, end, nft_genmask_next(net));
+		dup = pipapo_get(net, set, end, nft_genmask_next(net), tstamp);
 	}
 
 	if (PTR_ERR(dup) != -ENOENT) {
@@ -1581,6 +1584,7 @@ static void pipapo_gc(struct nft_set *se
 {
 	struct nft_pipapo *priv = nft_set_priv(set);
 	struct net *net = read_pnet(&set->net);
+	u64 tstamp = nft_net_tstamp(net);
 	int rules_f0, first_rule = 0;
 	struct nft_pipapo_elem *e;
 	struct nft_trans_gc *gc;
@@ -1615,7 +1619,7 @@ static void pipapo_gc(struct nft_set *se
 		/* synchronous gc never fails, there is no need to set on
 		 * NFT_SET_ELEM_DEAD_BIT.
 		 */
-		if (nft_set_elem_expired(&e->ext)) {
+		if (__nft_set_elem_expired(&e->ext, tstamp)) {
 			priv->dirty = true;
 
 			gc = nft_trans_gc_queue_sync(gc, GFP_ATOMIC);
@@ -1786,7 +1790,7 @@ static void *pipapo_deactivate(const str
 {
 	struct nft_pipapo_elem *e;
 
-	e = pipapo_get(net, set, data, nft_genmask_next(net));
+	e = pipapo_get(net, set, data, nft_genmask_next(net), nft_net_tstamp(net));
 	if (IS_ERR(e))
 		return NULL;
 
--- a/net/netfilter/nft_set_rbtree.c
+++ b/net/netfilter/nft_set_rbtree.c
@@ -314,6 +314,7 @@ static int __nft_rbtree_insert(const str
 	struct nft_rbtree *priv = nft_set_priv(set);
 	u8 cur_genmask = nft_genmask_cur(net);
 	u8 genmask = nft_genmask_next(net);
+	u64 tstamp = nft_net_tstamp(net);
 	int d;
 
 	/* Descend the tree to search for an existing element greater than the
@@ -361,7 +362,7 @@ static int __nft_rbtree_insert(const str
 		/* perform garbage collection to avoid bogus overlap reports
 		 * but skip new elements in this transaction.
 		 */
-		if (nft_set_elem_expired(&rbe->ext) &&
+		if (__nft_set_elem_expired(&rbe->ext, tstamp) &&
 		    nft_set_elem_active(&rbe->ext, cur_genmask)) {
 			const struct nft_rbtree_elem *removed_end;
 
@@ -553,6 +554,7 @@ static void *nft_rbtree_deactivate(const
 	const struct rb_node *parent = priv->root.rb_node;
 	struct nft_rbtree_elem *rbe, *this = elem->priv;
 	u8 genmask = nft_genmask_next(net);
+	u64 tstamp = nft_net_tstamp(net);
 	int d;
 
 	while (parent != NULL) {
@@ -573,7 +575,7 @@ static void *nft_rbtree_deactivate(const
 				   nft_rbtree_interval_end(this)) {
 				parent = parent->rb_right;
 				continue;
-			} else if (nft_set_elem_expired(&rbe->ext)) {
+			} else if (__nft_set_elem_expired(&rbe->ext, tstamp)) {
 				break;
 			} else if (!nft_set_elem_active(&rbe->ext, genmask)) {
 				parent = parent->rb_left;
@@ -632,9 +634,10 @@ static void nft_rbtree_gc(struct nft_set
 	struct nft_rbtree *priv = nft_set_priv(set);
 	struct nft_rbtree_elem *rbe, *rbe_end = NULL;
 	struct nftables_pernet *nft_net;
+	struct net *net = read_pnet(&set->net);
+	u64 tstamp = nft_net_tstamp(net);
 	struct rb_node *node, *next;
 	struct nft_trans_gc *gc;
-	struct net *net;
 
 	set  = nft_set_container_of(priv);
 	net  = read_pnet(&set->net);
@@ -657,7 +660,7 @@ static void nft_rbtree_gc(struct nft_set
 			rbe_end = rbe;
 			continue;
 		}
-		if (!nft_set_elem_expired(&rbe->ext))
+		if (!__nft_set_elem_expired(&rbe->ext, tstamp))
 			continue;
 
 		gc = nft_trans_gc_queue_sync(gc, GFP_KERNEL);

[PATCH 6.6 165/166] netfilter: nf_tables: bail out if stateful expression provides no .clone

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 3c13725f43dcf43ad8a9bcd6a9f12add19a8f93e upstream.

All existing NFT_EXPR_STATEFUL provide a .clone interface, remove
fallback to copy content of stateful expression since this is never
exercised and bail out if .clone interface is not defined.

Stable-dep-of: fa23e0d4b756 ("netfilter: nf_tables: allow clone callbacks to sleep")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_tables_api.c |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3336,14 +3336,13 @@ int nft_expr_clone(struct nft_expr *dst,
 {
 	int err;
 
-	if (src->ops->clone) {
-		dst->ops = src->ops;
-		err = src->ops->clone(dst, src);
-		if (err < 0)
-			return err;
-	} else {
-		memcpy(dst, src, src->ops->size);
-	}
+	if (WARN_ON_ONCE(!src->ops->clone))
+		return -EINVAL;
+
+	dst->ops = src->ops;
+	err = src->ops->clone(dst, src);
+	if (err < 0)
+		return err;
 
 	__module_get(src->ops->type->owner);
 

[PATCH 6.6 166/166] netfilter: nf_tables: allow clone callbacks to sleep

[Greg Kroah-Hartman]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit fa23e0d4b756d25829e124d6b670a4c6bbd4bf7e upstream.

Sven Auhagen reports transaction failures with following error:
  ./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
  percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left

This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.

One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.

Normally this happens from control plane, so this could use GFP_KERNEL
instead.  But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).

At this time, .clone callbacks always use GFP_ATOMIC for this reason.

Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.

Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/netfilter/nf_tables.h |    4 ++--
 net/netfilter/nf_tables_api.c     |    8 ++++----
 net/netfilter/nft_connlimit.c     |    4 ++--
 net/netfilter/nft_counter.c       |    4 ++--
 net/netfilter/nft_dynset.c        |    2 +-
 net/netfilter/nft_last.c          |    4 ++--
 net/netfilter/nft_limit.c         |   14 ++++++++------
 net/netfilter/nft_quota.c         |    4 ++--
 8 files changed, 23 insertions(+), 21 deletions(-)

--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -407,7 +407,7 @@ struct nft_expr_info;
 
 int nft_expr_inner_parse(const struct nft_ctx *ctx, const struct nlattr *nla,
 			 struct nft_expr_info *info);
-int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src);
+int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src, gfp_t gfp);
 void nft_expr_destroy(const struct nft_ctx *ctx, struct nft_expr *expr);
 int nft_expr_dump(struct sk_buff *skb, unsigned int attr,
 		  const struct nft_expr *expr, bool reset);
@@ -936,7 +936,7 @@ struct nft_expr_ops {
 						struct nft_regs *regs,
 						const struct nft_pktinfo *pkt);
 	int				(*clone)(struct nft_expr *dst,
-						 const struct nft_expr *src);
+						 const struct nft_expr *src, gfp_t gfp);
 	unsigned int			size;
 
 	int				(*init)(const struct nft_ctx *ctx,
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3332,7 +3332,7 @@ err_expr_parse:
 	return ERR_PTR(err);
 }
 
-int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src)
+int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src, gfp_t gfp)
 {
 	int err;
 
@@ -3340,7 +3340,7 @@ int nft_expr_clone(struct nft_expr *dst,
 		return -EINVAL;
 
 	dst->ops = src->ops;
-	err = src->ops->clone(dst, src);
+	err = src->ops->clone(dst, src, gfp);
 	if (err < 0)
 		return err;
 
@@ -6457,7 +6457,7 @@ int nft_set_elem_expr_clone(const struct
 		if (!expr)
 			goto err_expr;
 
-		err = nft_expr_clone(expr, set->exprs[i]);
+		err = nft_expr_clone(expr, set->exprs[i], GFP_KERNEL_ACCOUNT);
 		if (err < 0) {
 			kfree(expr);
 			goto err_expr;
@@ -6496,7 +6496,7 @@ static int nft_set_elem_expr_setup(struc
 
 	for (i = 0; i < num_exprs; i++) {
 		expr = nft_setelem_expr_at(elem_expr, elem_expr->size);
-		err = nft_expr_clone(expr, expr_array[i]);
+		err = nft_expr_clone(expr, expr_array[i], GFP_KERNEL_ACCOUNT);
 		if (err < 0)
 			goto err_elem_expr_setup;
 
--- a/net/netfilter/nft_connlimit.c
+++ b/net/netfilter/nft_connlimit.c
@@ -210,12 +210,12 @@ static void nft_connlimit_destroy(const
 	nft_connlimit_do_destroy(ctx, priv);
 }
 
-static int nft_connlimit_clone(struct nft_expr *dst, const struct nft_expr *src)
+static int nft_connlimit_clone(struct nft_expr *dst, const struct nft_expr *src, gfp_t gfp)
 {
 	struct nft_connlimit *priv_dst = nft_expr_priv(dst);
 	struct nft_connlimit *priv_src = nft_expr_priv(src);
 
-	priv_dst->list = kmalloc(sizeof(*priv_dst->list), GFP_ATOMIC);
+	priv_dst->list = kmalloc(sizeof(*priv_dst->list), gfp);
 	if (!priv_dst->list)
 		return -ENOMEM;
 
--- a/net/netfilter/nft_counter.c
+++ b/net/netfilter/nft_counter.c
@@ -231,7 +231,7 @@ static void nft_counter_destroy(const st
 	nft_counter_do_destroy(priv);
 }
 
-static int nft_counter_clone(struct nft_expr *dst, const struct nft_expr *src)
+static int nft_counter_clone(struct nft_expr *dst, const struct nft_expr *src, gfp_t gfp)
 {
 	struct nft_counter_percpu_priv *priv = nft_expr_priv(src);
 	struct nft_counter_percpu_priv *priv_clone = nft_expr_priv(dst);
@@ -241,7 +241,7 @@ static int nft_counter_clone(struct nft_
 
 	nft_counter_fetch(priv, &total);
 
-	cpu_stats = alloc_percpu_gfp(struct nft_counter, GFP_ATOMIC);
+	cpu_stats = alloc_percpu_gfp(struct nft_counter, gfp);
 	if (cpu_stats == NULL)
 		return -ENOMEM;
 
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -35,7 +35,7 @@ static int nft_dynset_expr_setup(const s
 
 	for (i = 0; i < priv->num_exprs; i++) {
 		expr = nft_setelem_expr_at(elem_expr, elem_expr->size);
-		if (nft_expr_clone(expr, priv->expr_array[i]) < 0)
+		if (nft_expr_clone(expr, priv->expr_array[i], GFP_ATOMIC) < 0)
 			return -1;
 
 		elem_expr->size += priv->expr_array[i]->ops->size;
--- a/net/netfilter/nft_last.c
+++ b/net/netfilter/nft_last.c
@@ -102,12 +102,12 @@ static void nft_last_destroy(const struc
 	kfree(priv->last);
 }
 
-static int nft_last_clone(struct nft_expr *dst, const struct nft_expr *src)
+static int nft_last_clone(struct nft_expr *dst, const struct nft_expr *src, gfp_t gfp)
 {
 	struct nft_last_priv *priv_dst = nft_expr_priv(dst);
 	struct nft_last_priv *priv_src = nft_expr_priv(src);
 
-	priv_dst->last = kzalloc(sizeof(*priv_dst->last), GFP_ATOMIC);
+	priv_dst->last = kzalloc(sizeof(*priv_dst->last), gfp);
 	if (!priv_dst->last)
 		return -ENOMEM;
 
--- a/net/netfilter/nft_limit.c
+++ b/net/netfilter/nft_limit.c
@@ -150,7 +150,7 @@ static void nft_limit_destroy(const stru
 }
 
 static int nft_limit_clone(struct nft_limit_priv *priv_dst,
-			   const struct nft_limit_priv *priv_src)
+			   const struct nft_limit_priv *priv_src, gfp_t gfp)
 {
 	priv_dst->tokens_max = priv_src->tokens_max;
 	priv_dst->rate = priv_src->rate;
@@ -158,7 +158,7 @@ static int nft_limit_clone(struct nft_li
 	priv_dst->burst = priv_src->burst;
 	priv_dst->invert = priv_src->invert;
 
-	priv_dst->limit = kmalloc(sizeof(*priv_dst->limit), GFP_ATOMIC);
+	priv_dst->limit = kmalloc(sizeof(*priv_dst->limit), gfp);
 	if (!priv_dst->limit)
 		return -ENOMEM;
 
@@ -223,14 +223,15 @@ static void nft_limit_pkts_destroy(const
 	nft_limit_destroy(ctx, &priv->limit);
 }
 
-static int nft_limit_pkts_clone(struct nft_expr *dst, const struct nft_expr *src)
+static int nft_limit_pkts_clone(struct nft_expr *dst, const struct nft_expr *src,
+				gfp_t gfp)
 {
 	struct nft_limit_priv_pkts *priv_dst = nft_expr_priv(dst);
 	struct nft_limit_priv_pkts *priv_src = nft_expr_priv(src);
 
 	priv_dst->cost = priv_src->cost;
 
-	return nft_limit_clone(&priv_dst->limit, &priv_src->limit);
+	return nft_limit_clone(&priv_dst->limit, &priv_src->limit, gfp);
 }
 
 static struct nft_expr_type nft_limit_type;
@@ -281,12 +282,13 @@ static void nft_limit_bytes_destroy(cons
 	nft_limit_destroy(ctx, priv);
 }
 
-static int nft_limit_bytes_clone(struct nft_expr *dst, const struct nft_expr *src)
+static int nft_limit_bytes_clone(struct nft_expr *dst, const struct nft_expr *src,
+				 gfp_t gfp)
 {
 	struct nft_limit_priv *priv_dst = nft_expr_priv(dst);
 	struct nft_limit_priv *priv_src = nft_expr_priv(src);
 
-	return nft_limit_clone(priv_dst, priv_src);
+	return nft_limit_clone(priv_dst, priv_src, gfp);
 }
 
 static const struct nft_expr_ops nft_limit_bytes_ops = {
--- a/net/netfilter/nft_quota.c
+++ b/net/netfilter/nft_quota.c
@@ -233,7 +233,7 @@ static void nft_quota_destroy(const stru
 	return nft_quota_do_destroy(ctx, priv);
 }
 
-static int nft_quota_clone(struct nft_expr *dst, const struct nft_expr *src)
+static int nft_quota_clone(struct nft_expr *dst, const struct nft_expr *src, gfp_t gfp)
 {
 	struct nft_quota *priv_dst = nft_expr_priv(dst);
 	struct nft_quota *priv_src = nft_expr_priv(src);
@@ -241,7 +241,7 @@ static int nft_quota_clone(struct nft_ex
 	priv_dst->quota = priv_src->quota;
 	priv_dst->flags = priv_src->flags;
 
-	priv_dst->consumed = kmalloc(sizeof(*priv_dst->consumed), GFP_ATOMIC);
+	priv_dst->consumed = kmalloc(sizeof(*priv_dst->consumed), gfp);
 	if (!priv_dst->consumed)
 		return -ENOMEM;
 

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Naresh Kamboju]

On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Regressions on mips the rt305x_defconfig builds failed with gcc-12
the stable-rc v6.6.83-167-gd16a828e7b09

First seen on the v6.6.83-167-gd16a828e7b09
 Good: v6.6.83
 Bad: v6.6.83-167-gd16a828e7b09

* mips, build
  - gcc-12-rt305x_defconfig

Regression Analysis:
 - New regression? Yes
 - Reproducibility? Yes

Build regression: mips implicit declaration of function 'vunmap'
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build log
io_uring/io_uring.c: In function 'io_pages_unmap':
io_uring/io_uring.c:2708:17: error: implicit declaration of function
'vunmap'; did you mean 'kunmap'?
[-Werror=implicit-function-declaration]
 2708 |                 vunmap(ptr);
      |                 ^~~~~~
      |                 kunmap
io_uring/io_uring.c: In function '__io_uaddr_map':
io_uring/io_uring.c:2784:21: error: implicit declaration of function
'vmap'; did you mean 'kmap'? [-Werror=implicit-function-declaration]
 2784 |         page_addr = vmap(page_array, nr_pages, VM_MAP, PAGE_KERNEL);
      |                     ^~~~
      |                     kmap
io_uring/io_uring.c:2784:48: error: 'VM_MAP' undeclared (first use in
this function); did you mean 'VM_MTE'?
 2784 |         page_addr = vmap(page_array, nr_pages, VM_MAP, PAGE_KERNEL);
      |                                                ^~~~~~
      |                                                VM_MTE

## Source
* Kernel version: 6.6.84-rc1
* Git tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* Git sha: d16a828e7b0965ca37245ebea19052ad7b4b2f9b
* Git describe: v6.6.83-167-gd16a828e7b09
* Project details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-167-gd16a828e7b09/

## Build
* Build log: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-167-gd16a828e7b09/testrun/27677634/suite/build/test/gcc-12-rt305x_defconfig/log
* Build history:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-167-gd16a828e7b09/testrun/27677634/suite/build/test/gcc-12-rt305x_defconfig/history/
* Build details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-167-gd16a828e7b09/testrun/27677634/suite/build/test/gcc-12-rt305x_defconfig/
* Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2uXZlKzVxja3mOQfRLlPRxHzd5L/
* Kernel config:
https://storage.tuxsuite.com/public/linaro/lkft/builds/2uXZlKzVxja3mOQfRLlPRxHzd5L/config

## Steps to reproduce
 - tuxmake --runtime podman --target-arch mips --toolchain gcc-12
--kconfig rt305x_defconfig


--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Jens Axboe]

On 3/19/25 10:33 AM, Naresh Kamboju wrote:
> On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
>>
>> This is the start of the stable review cycle for the 6.6.84 release.
>> There are 166 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
>> or in the git tree and branch at:
>>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
> 
> Regressions on mips the rt305x_defconfig builds failed with gcc-12
> the stable-rc v6.6.83-167-gd16a828e7b09
> 
> First seen on the v6.6.83-167-gd16a828e7b09
>  Good: v6.6.83
>  Bad: v6.6.83-167-gd16a828e7b09
> 
> * mips, build
>   - gcc-12-rt305x_defconfig
> 
> Regression Analysis:
>  - New regression? Yes
>  - Reproducibility? Yes
> 
> Build regression: mips implicit declaration of function 'vunmap'
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

Ah that's my fault, forgot to include the backport of:

commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5
Author: Jens Axboe <axboe@kernel.dk>
Date:   Sat Mar 16 07:21:43 2024 -0600

    mm: add nommu variant of vm_insert_pages()

for 6.1-stable and 6.6-stable. Greg, can you just cherry pick that one?
It'll pick cleanly into both, should go before the io_uring mmap series
obviously.

Sorry about that! I did have it in my local trees, but for some reason
forgot to include it in the sent in series.

-- 
Jens Axboe

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[SeongJae Park]

Hello,

On Wed, 19 Mar 2025 07:29:31 -0700 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:

> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> Anything received after that time might be too late.

This rc kernel passes DAMON functionality test[1] on my test machine.
Attaching the test results summary below.  Please note that I retrieved the
kernel from linux-stable-rc tree[2].

Tested-by: SeongJae Park <sj@kernel.org>

[1] https://github.com/damonitor/damon-tests/tree/next/corr
[2] d16a828e7b09 ("Linux 6.6.84-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: debugfs_rm_non_contexts.sh
ok 8 selftests: damon: sysfs.sh
ok 9 selftests: damon: sysfs_update_removed_scheme_dir.sh
ok 10 selftests: damon: reclaim.sh
ok 11 selftests: damon: lru_sort.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh
ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh # SKIP
ok 12 selftests: damon-tests: build_m68k.sh # SKIP
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
 [33m
 [92mPASS [39m

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Greg Kroah-Hartman]

On Wed, Mar 19, 2025 at 10:37:20AM -0600, Jens Axboe wrote:
> On 3/19/25 10:33 AM, Naresh Kamboju wrote:
> > On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> >>
> >> This is the start of the stable review cycle for the 6.6.84 release.
> >> There are 166 patches in this series, all will be posted as a response
> >> to this one.  If anyone has any issues with these being applied, please
> >> let me know.
> >>
> >> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> >> Anything received after that time might be too late.
> >>
> >> The whole patch series can be found in one patch at:
> >>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
> >> or in the git tree and branch at:
> >>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> >> and the diffstat can be found below.
> >>
> >> thanks,
> >>
> >> greg k-h
> > 
> > Regressions on mips the rt305x_defconfig builds failed with gcc-12
> > the stable-rc v6.6.83-167-gd16a828e7b09
> > 
> > First seen on the v6.6.83-167-gd16a828e7b09
> >  Good: v6.6.83
> >  Bad: v6.6.83-167-gd16a828e7b09
> > 
> > * mips, build
> >   - gcc-12-rt305x_defconfig
> > 
> > Regression Analysis:
> >  - New regression? Yes
> >  - Reproducibility? Yes
> > 
> > Build regression: mips implicit declaration of function 'vunmap'
> > Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> 
> Ah that's my fault, forgot to include the backport of:
> 
> commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5
> Author: Jens Axboe <axboe@kernel.dk>
> Date:   Sat Mar 16 07:21:43 2024 -0600
> 
>     mm: add nommu variant of vm_insert_pages()
> 
> for 6.1-stable and 6.6-stable. Greg, can you just cherry pick that one?
> It'll pick cleanly into both, should go before the io_uring mmap series
> obviously.
> 
> Sorry about that! I did have it in my local trees, but for some reason
> forgot to include it in the sent in series.

No worries, will do in a few hours and will push out a -rc2.

greg k-h

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Jon Hunter]

On Wed, 19 Mar 2025 07:29:31 -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.6:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version:	6.6.84-rc1-gd16a828e7b09
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Greg Kroah-Hartman]

On Wed, Mar 19, 2025 at 10:37:20AM -0600, Jens Axboe wrote:
> On 3/19/25 10:33 AM, Naresh Kamboju wrote:
> > On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
> > <gregkh@linuxfoundation.org> wrote:
> >>
> >> This is the start of the stable review cycle for the 6.6.84 release.
> >> There are 166 patches in this series, all will be posted as a response
> >> to this one.  If anyone has any issues with these being applied, please
> >> let me know.
> >>
> >> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> >> Anything received after that time might be too late.
> >>
> >> The whole patch series can be found in one patch at:
> >>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
> >> or in the git tree and branch at:
> >>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> >> and the diffstat can be found below.
> >>
> >> thanks,
> >>
> >> greg k-h
> > 
> > Regressions on mips the rt305x_defconfig builds failed with gcc-12
> > the stable-rc v6.6.83-167-gd16a828e7b09
> > 
> > First seen on the v6.6.83-167-gd16a828e7b09
> >  Good: v6.6.83
> >  Bad: v6.6.83-167-gd16a828e7b09
> > 
> > * mips, build
> >   - gcc-12-rt305x_defconfig
> > 
> > Regression Analysis:
> >  - New regression? Yes
> >  - Reproducibility? Yes
> > 
> > Build regression: mips implicit declaration of function 'vunmap'
> > Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> 
> Ah that's my fault, forgot to include the backport of:
> 
> commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5
> Author: Jens Axboe <axboe@kernel.dk>
> Date:   Sat Mar 16 07:21:43 2024 -0600
> 
>     mm: add nommu variant of vm_insert_pages()
> 
> for 6.1-stable and 6.6-stable. Greg, can you just cherry pick that one?
> It'll pick cleanly into both, should go before the io_uring mmap series
> obviously.
> 
> Sorry about that! I did have it in my local trees, but for some reason
> forgot to include it in the sent in series.

Wait, this is already in the 6.6.y and 6.1.y queues, so this can't be
the fix.  Was there a fixup for that commit somewhere else that I'm
missing?

thanks,

greg k-h

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Ron Economos]

On 3/19/25 07:29, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Miguel Ojeda]

On Wed, 19 Mar 2025 07:29:31 -0700 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> Anything received after that time might be too late.

Boot-tested under QEMU for Rust x86_64:

Tested-by: Miguel Ojeda <ojeda@kernel.org>

Thanks!

Cheers,
Miguel

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 345 bytes --]

On Wed, Mar 19, 2025 at 07:29:31AM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Jens Axboe]

On 3/19/25 5:51 PM, Greg Kroah-Hartman wrote:
> On Wed, Mar 19, 2025 at 10:37:20AM -0600, Jens Axboe wrote:
>> On 3/19/25 10:33 AM, Naresh Kamboju wrote:
>>> On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
>>> <gregkh@linuxfoundation.org> wrote:
>>>>
>>>> This is the start of the stable review cycle for the 6.6.84 release.
>>>> There are 166 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
>>>> Anything received after that time might be too late.
>>>>
>>>> The whole patch series can be found in one patch at:
>>>>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
>>>> or in the git tree and branch at:
>>>>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
>>>> and the diffstat can be found below.
>>>>
>>>> thanks,
>>>>
>>>> greg k-h
>>>
>>> Regressions on mips the rt305x_defconfig builds failed with gcc-12
>>> the stable-rc v6.6.83-167-gd16a828e7b09
>>>
>>> First seen on the v6.6.83-167-gd16a828e7b09
>>>  Good: v6.6.83
>>>  Bad: v6.6.83-167-gd16a828e7b09
>>>
>>> * mips, build
>>>   - gcc-12-rt305x_defconfig
>>>
>>> Regression Analysis:
>>>  - New regression? Yes
>>>  - Reproducibility? Yes
>>>
>>> Build regression: mips implicit declaration of function 'vunmap'
>>> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>>
>> Ah that's my fault, forgot to include the backport of:
>>
>> commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5
>> Author: Jens Axboe <axboe@kernel.dk>
>> Date:   Sat Mar 16 07:21:43 2024 -0600
>>
>>     mm: add nommu variant of vm_insert_pages()
>>
>> for 6.1-stable and 6.6-stable. Greg, can you just cherry pick that one?
>> It'll pick cleanly into both, should go before the io_uring mmap series
>> obviously.
>>
>> Sorry about that! I did have it in my local trees, but for some reason
>> forgot to include it in the sent in series.
> 
> Wait, this is already in the 6.6.y and 6.1.y queues, so this can't be
> the fix.  Was there a fixup for that commit somewhere else that I'm
> missing?

Huh indeed, guess I didn't mess up in the first place. What is going on
here indeed... Is that mips config NOMMU yet doesn't link in mm/nommu.o?

Checking, and no, it definitely has MMU=y in the config. Guess I
should've read the initial report more closely, it's simply missing the
vunmap definition. Adding linux/vmalloc.h to io_uring/io_uring.c should
fix it.

How do we want to deal with this?

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 058c89f72e8c..efa7849b82c1 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -70,6 +70,7 @@
 #include <linux/io_uring.h>
 #include <linux/audit.h>
 #include <linux/security.h>
+#include <linux/vmalloc.h>
 #include <asm/shmparam.h>
 
 #define CREATE_TRACE_POINTS

-- 
Jens Axboe

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Jens Axboe]

[-- Attachment #1: Type: text/plain, Size: 2965 bytes --]

On 3/20/25 6:55 AM, Jens Axboe wrote:
> On 3/19/25 5:51 PM, Greg Kroah-Hartman wrote:
>> On Wed, Mar 19, 2025 at 10:37:20AM -0600, Jens Axboe wrote:
>>> On 3/19/25 10:33 AM, Naresh Kamboju wrote:
>>>> On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
>>>> <gregkh@linuxfoundation.org> wrote:
>>>>>
>>>>> This is the start of the stable review cycle for the 6.6.84 release.
>>>>> There are 166 patches in this series, all will be posted as a response
>>>>> to this one.  If anyone has any issues with these being applied, please
>>>>> let me know.
>>>>>
>>>>> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
>>>>> Anything received after that time might be too late.
>>>>>
>>>>> The whole patch series can be found in one patch at:
>>>>>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
>>>>> or in the git tree and branch at:
>>>>>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
>>>>> and the diffstat can be found below.
>>>>>
>>>>> thanks,
>>>>>
>>>>> greg k-h
>>>>
>>>> Regressions on mips the rt305x_defconfig builds failed with gcc-12
>>>> the stable-rc v6.6.83-167-gd16a828e7b09
>>>>
>>>> First seen on the v6.6.83-167-gd16a828e7b09
>>>>  Good: v6.6.83
>>>>  Bad: v6.6.83-167-gd16a828e7b09
>>>>
>>>> * mips, build
>>>>   - gcc-12-rt305x_defconfig
>>>>
>>>> Regression Analysis:
>>>>  - New regression? Yes
>>>>  - Reproducibility? Yes
>>>>
>>>> Build regression: mips implicit declaration of function 'vunmap'
>>>> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>>>
>>> Ah that's my fault, forgot to include the backport of:
>>>
>>> commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5
>>> Author: Jens Axboe <axboe@kernel.dk>
>>> Date:   Sat Mar 16 07:21:43 2024 -0600
>>>
>>>     mm: add nommu variant of vm_insert_pages()
>>>
>>> for 6.1-stable and 6.6-stable. Greg, can you just cherry pick that one?
>>> It'll pick cleanly into both, should go before the io_uring mmap series
>>> obviously.
>>>
>>> Sorry about that! I did have it in my local trees, but for some reason
>>> forgot to include it in the sent in series.
>>
>> Wait, this is already in the 6.6.y and 6.1.y queues, so this can't be
>> the fix.  Was there a fixup for that commit somewhere else that I'm
>> missing?
> 
> Huh indeed, guess I didn't mess up in the first place. What is going on
> here indeed... Is that mips config NOMMU yet doesn't link in mm/nommu.o?
> 
> Checking, and no, it definitely has MMU=y in the config. Guess I
> should've read the initial report more closely, it's simply missing the
> vunmap definition. Adding linux/vmalloc.h to io_uring/io_uring.c should
> fix it.
> 
> How do we want to deal with this?

Either fold in the hunk from the previous email, or replace patch 2 in
the series I sent with this one instead, which adds the vmalloc.h
include. That should sort out the issue without needing add-on patches
that don't exist upstream.

-- 
Jens Axboe

[-- Attachment #2: 0002-io_uring-get-rid-of-remap_pfn_range-for-mapping-ring.patch --]
[-- Type: text/x-patch, Size: 7437 bytes --]

From 063cda8806cf277c56e4bfc7163e5faa355e177d Mon Sep 17 00:00:00 2001
From: Jens Axboe <axboe@kernel.dk>
Date: Wed, 13 Mar 2024 09:56:14 -0600
Subject: [PATCH 02/10] io_uring: get rid of remap_pfn_range() for mapping
 rings/sqes

Commit 3ab1db3c6039e02a9deb9d5091d28d559917a645 upstream.

Rather than use remap_pfn_range() for this and manually free later,
switch to using vm_insert_pages() and have it Just Work.

If possible, allocate a single compound page that covers the range that
is needed. If that works, then we can just use page_address() on that
page. If we fail to get a compound page, allocate single pages and use
vmap() to map them into the kernel virtual address space.

This just covers the rings/sqes, the other remaining user of the mmap
remap_pfn_range() user will be converted separately. Once that is done,
we can kill the old alloc/free code.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
 io_uring/io_uring.c | 140 +++++++++++++++++++++++++++++++++++++++++---
 io_uring/io_uring.h |   2 +
 2 files changed, 134 insertions(+), 8 deletions(-)

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 5776440f584c..b506064ca29d 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -71,6 +71,7 @@
 #include <linux/io_uring.h>
 #include <linux/audit.h>
 #include <linux/security.h>
+#include <linux/vmalloc.h>
 #include <asm/shmparam.h>
 
 #define CREATE_TRACE_POINTS
@@ -2683,6 +2684,36 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,
 	return READ_ONCE(rings->cq.head) == READ_ONCE(rings->cq.tail) ? ret : 0;
 }
 
+static void io_pages_unmap(void *ptr, struct page ***pages,
+			   unsigned short *npages)
+{
+	bool do_vunmap = false;
+
+	if (!ptr)
+		return;
+
+	if (*npages) {
+		struct page **to_free = *pages;
+		int i;
+
+		/*
+		 * Only did vmap for the non-compound multiple page case.
+		 * For the compound page, we just need to put the head.
+		 */
+		if (PageCompound(to_free[0]))
+			*npages = 1;
+		else if (*npages > 1)
+			do_vunmap = true;
+		for (i = 0; i < *npages; i++)
+			put_page(to_free[i]);
+	}
+	if (do_vunmap)
+		vunmap(ptr);
+	kvfree(*pages);
+	*pages = NULL;
+	*npages = 0;
+}
+
 void io_mem_free(void *ptr)
 {
 	if (!ptr)
@@ -2787,8 +2818,8 @@ static void *io_sqes_map(struct io_ring_ctx *ctx, unsigned long uaddr,
 static void io_rings_free(struct io_ring_ctx *ctx)
 {
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP)) {
-		io_mem_free(ctx->rings);
-		io_mem_free(ctx->sq_sqes);
+		io_pages_unmap(ctx->rings, &ctx->ring_pages, &ctx->n_ring_pages);
+		io_pages_unmap(ctx->sq_sqes, &ctx->sqe_pages, &ctx->n_sqe_pages);
 	} else {
 		io_pages_free(&ctx->ring_pages, ctx->n_ring_pages);
 		ctx->n_ring_pages = 0;
@@ -2800,6 +2831,80 @@ static void io_rings_free(struct io_ring_ctx *ctx)
 	ctx->sq_sqes = NULL;
 }
 
+static void *io_mem_alloc_compound(struct page **pages, int nr_pages,
+				   size_t size, gfp_t gfp)
+{
+	struct page *page;
+	int i, order;
+
+	order = get_order(size);
+	if (order > 10)
+		return ERR_PTR(-ENOMEM);
+	else if (order)
+		gfp |= __GFP_COMP;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < nr_pages; i++)
+		pages[i] = page + i;
+
+	return page_address(page);
+}
+
+static void *io_mem_alloc_single(struct page **pages, int nr_pages, size_t size,
+				 gfp_t gfp)
+{
+	void *ret;
+	int i;
+
+	for (i = 0; i < nr_pages; i++) {
+		pages[i] = alloc_page(gfp);
+		if (!pages[i])
+			goto err;
+	}
+
+	ret = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL);
+	if (ret)
+		return ret;
+err:
+	while (i--)
+		put_page(pages[i]);
+	return ERR_PTR(-ENOMEM);
+}
+
+static void *io_pages_map(struct page ***out_pages, unsigned short *npages,
+			  size_t size)
+{
+	gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN;
+	struct page **pages;
+	int nr_pages;
+	void *ret;
+
+	nr_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	pages = kvmalloc_array(nr_pages, sizeof(struct page *), gfp);
+	if (!pages)
+		return ERR_PTR(-ENOMEM);
+
+	ret = io_mem_alloc_compound(pages, nr_pages, size, gfp);
+	if (!IS_ERR(ret))
+		goto done;
+
+	ret = io_mem_alloc_single(pages, nr_pages, size, gfp);
+	if (!IS_ERR(ret)) {
+done:
+		*out_pages = pages;
+		*npages = nr_pages;
+		return ret;
+	}
+
+	kvfree(pages);
+	*out_pages = NULL;
+	*npages = 0;
+	return ret;
+}
+
 void *io_mem_alloc(size_t size)
 {
 	gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP;
@@ -3463,14 +3568,12 @@ static void *io_uring_validate_mmap_request(struct file *file,
 		/* Don't allow mmap if the ring was setup without it */
 		if (ctx->flags & IORING_SETUP_NO_MMAP)
 			return ERR_PTR(-EINVAL);
-		ptr = ctx->rings;
-		break;
+		return ctx->rings;
 	case IORING_OFF_SQES:
 		/* Don't allow mmap if the ring was setup without it */
 		if (ctx->flags & IORING_SETUP_NO_MMAP)
 			return ERR_PTR(-EINVAL);
-		ptr = ctx->sq_sqes;
-		break;
+		return ctx->sq_sqes;
 	case IORING_OFF_PBUF_RING: {
 		struct io_buffer_list *bl;
 		unsigned int bgid;
@@ -3494,11 +3597,22 @@ static void *io_uring_validate_mmap_request(struct file *file,
 	return ptr;
 }
 
+int io_uring_mmap_pages(struct io_ring_ctx *ctx, struct vm_area_struct *vma,
+			struct page **pages, int npages)
+{
+	unsigned long nr_pages = npages;
+
+	vm_flags_set(vma, VM_DONTEXPAND);
+	return vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
+}
+
 #ifdef CONFIG_MMU
 
 static __cold int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
 {
+	struct io_ring_ctx *ctx = file->private_data;
 	size_t sz = vma->vm_end - vma->vm_start;
+	long offset = vma->vm_pgoff << PAGE_SHIFT;
 	unsigned long pfn;
 	void *ptr;
 
@@ -3506,6 +3620,16 @@ static __cold int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
 	if (IS_ERR(ptr))
 		return PTR_ERR(ptr);
 
+	switch (offset & IORING_OFF_MMAP_MASK) {
+	case IORING_OFF_SQ_RING:
+	case IORING_OFF_CQ_RING:
+		return io_uring_mmap_pages(ctx, vma, ctx->ring_pages,
+						ctx->n_ring_pages);
+	case IORING_OFF_SQES:
+		return io_uring_mmap_pages(ctx, vma, ctx->sqe_pages,
+						ctx->n_sqe_pages);
+	}
+
 	pfn = virt_to_phys(ptr) >> PAGE_SHIFT;
 	return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
 }
@@ -3795,7 +3919,7 @@ static __cold int io_allocate_scq_urings(struct io_ring_ctx *ctx,
 		return -EOVERFLOW;
 
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP))
-		rings = io_mem_alloc(size);
+		rings = io_pages_map(&ctx->ring_pages, &ctx->n_ring_pages, size);
 	else
 		rings = io_rings_map(ctx, p->cq_off.user_addr, size);
 
@@ -3820,7 +3944,7 @@ static __cold int io_allocate_scq_urings(struct io_ring_ctx *ctx,
 	}
 
 	if (!(ctx->flags & IORING_SETUP_NO_MMAP))
-		ptr = io_mem_alloc(size);
+		ptr = io_pages_map(&ctx->sqe_pages, &ctx->n_sqe_pages, size);
 	else
 		ptr = io_sqes_map(ctx, p->sq_off.user_addr, size);
 
diff --git a/io_uring/io_uring.h b/io_uring/io_uring.h
index 57658d24a73e..ea0b8acabc71 100644
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -55,6 +55,8 @@ bool io_fill_cqe_req_aux(struct io_kiocb *req, bool defer, s32 res, u32 cflags);
 void __io_commit_cqring_flush(struct io_ring_ctx *ctx);
 
 struct page **io_pin_pages(unsigned long ubuf, unsigned long len, int *npages);
+int io_uring_mmap_pages(struct io_ring_ctx *ctx, struct vm_area_struct *vma,
+			struct page **pages, int npages);
 
 struct file *io_file_get_normal(struct io_kiocb *req, int fd);
 struct file *io_file_get_fixed(struct io_kiocb *req, int fd,
-- 
2.49.0

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Greg Kroah-Hartman]

On Thu, Mar 20, 2025 at 07:02:23AM -0600, Jens Axboe wrote:
> On 3/20/25 6:55 AM, Jens Axboe wrote:
> > On 3/19/25 5:51 PM, Greg Kroah-Hartman wrote:
> >> On Wed, Mar 19, 2025 at 10:37:20AM -0600, Jens Axboe wrote:
> >>> On 3/19/25 10:33 AM, Naresh Kamboju wrote:
> >>>> On Wed, 19 Mar 2025 at 20:09, Greg Kroah-Hartman
> >>>> <gregkh@linuxfoundation.org> wrote:
> >>>>>
> >>>>> This is the start of the stable review cycle for the 6.6.84 release.
> >>>>> There are 166 patches in this series, all will be posted as a response
> >>>>> to this one.  If anyone has any issues with these being applied, please
> >>>>> let me know.
> >>>>>
> >>>>> Responses should be made by Fri, 21 Mar 2025 14:29:55 +0000.
> >>>>> Anything received after that time might be too late.
> >>>>>
> >>>>> The whole patch series can be found in one patch at:
> >>>>>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.84-rc1.gz
> >>>>> or in the git tree and branch at:
> >>>>>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> >>>>> and the diffstat can be found below.
> >>>>>
> >>>>> thanks,
> >>>>>
> >>>>> greg k-h
> >>>>
> >>>> Regressions on mips the rt305x_defconfig builds failed with gcc-12
> >>>> the stable-rc v6.6.83-167-gd16a828e7b09
> >>>>
> >>>> First seen on the v6.6.83-167-gd16a828e7b09
> >>>>  Good: v6.6.83
> >>>>  Bad: v6.6.83-167-gd16a828e7b09
> >>>>
> >>>> * mips, build
> >>>>   - gcc-12-rt305x_defconfig
> >>>>
> >>>> Regression Analysis:
> >>>>  - New regression? Yes
> >>>>  - Reproducibility? Yes
> >>>>
> >>>> Build regression: mips implicit declaration of function 'vunmap'
> >>>> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> >>>
> >>> Ah that's my fault, forgot to include the backport of:
> >>>
> >>> commit 62346c6cb28b043f2a6e95337d9081ec0b37b5f5
> >>> Author: Jens Axboe <axboe@kernel.dk>
> >>> Date:   Sat Mar 16 07:21:43 2024 -0600
> >>>
> >>>     mm: add nommu variant of vm_insert_pages()
> >>>
> >>> for 6.1-stable and 6.6-stable. Greg, can you just cherry pick that one?
> >>> It'll pick cleanly into both, should go before the io_uring mmap series
> >>> obviously.
> >>>
> >>> Sorry about that! I did have it in my local trees, but for some reason
> >>> forgot to include it in the sent in series.
> >>
> >> Wait, this is already in the 6.6.y and 6.1.y queues, so this can't be
> >> the fix.  Was there a fixup for that commit somewhere else that I'm
> >> missing?
> > 
> > Huh indeed, guess I didn't mess up in the first place. What is going on
> > here indeed... Is that mips config NOMMU yet doesn't link in mm/nommu.o?
> > 
> > Checking, and no, it definitely has MMU=y in the config. Guess I
> > should've read the initial report more closely, it's simply missing the
> > vunmap definition. Adding linux/vmalloc.h to io_uring/io_uring.c should
> > fix it.
> > 
> > How do we want to deal with this?
> 
> Either fold in the hunk from the previous email, or replace patch 2 in
> the series I sent with this one instead, which adds the vmalloc.h
> include. That should sort out the issue without needing add-on patches
> that don't exist upstream.

Now replaced, thanks!

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Hardik Garg]

The kernel, bpf tool, perf tool, and kselftest builds fine for v6.6.84-rc1 on x86 and arm64 Azure VM.

Kernel binary size for x86 build:
text      data      bss      dec       hex      filename
27318662  16715490  4640768  48674920  2e6b868  vmlinux

Kernel binary size for arm64 build:
text      data      bss      dec       hex      filename
34684949  13845466  970368   49500783  2f3526f  vmlinux


Tested-by: Hardik Garg <hargar@linux.microsoft.com>




Thanks,
Hardik

Re: [PATCH 6.6 000/166] 6.6.84-rc1 review

[Peter Schneider]

Am 19.03.2025 um 15:29 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.6.84 release.
> There are 166 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg 
oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com