stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Luiz Augusto von Dentz <luiz.von.dentz@intel.com>,
	Sasha Levin <sashal@kernel.org>,
	marcel@holtmann.org, luiz.dentz@gmail.com,
	linux-bluetooth@vger.kernel.org
Subject: [PATCH AUTOSEL 6.14 52/54] Bluetooth: qca: add WCN3950 support
Date: Thu,  3 Apr 2025 15:02:07 -0400	[thread overview]
Message-ID: <20250403190209.2675485-52-sashal@kernel.org> (raw)
In-Reply-To: <20250403190209.2675485-1-sashal@kernel.org>

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit d5712c511cb358ab87f1e884848419ec76a67ab2 ]

WCN3950 is another example of the WCN39xx BT/WiFI family of chips. It
requires different firmware files and has different current
requirements, so add it as a separate SoC type.

The firmware for these chips has been recently added to the
linux-firmware repository and will be a part of the upcoming release:
- qca/cmbtfw12.tlv
- qca/cmbtfw13.tlv
- qca/cmnv12.bin
- qca/cmnv13.bin
- qca/cmnv13s.bin
- qca/cmnv13t.bin

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btqca.c   | 14 ++++++++++++++
 drivers/bluetooth/btqca.h   |  4 ++++
 drivers/bluetooth/hci_qca.c | 25 +++++++++++++++++++++++++
 3 files changed, 43 insertions(+)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 7d6b02fe2040f..3d6778b95e005 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -816,6 +816,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		snprintf(config.fwname, sizeof(config.fwname), "qca/%s", rampatch_name);
 	} else {
 		switch (soc_type) {
+		case QCA_WCN3950:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/cmbtfw%02x.tlv", rom_ver);
+			break;
 		case QCA_WCN3990:
 		case QCA_WCN3991:
 		case QCA_WCN3998:
@@ -881,6 +885,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		}
 	} else {
 		switch (soc_type) {
+		case QCA_WCN3950:
+			if (le32_to_cpu(ver.soc_id) == QCA_WCN3950_SOC_ID_T)
+				variant = "t";
+			else if (le32_to_cpu(ver.soc_id) == QCA_WCN3950_SOC_ID_S)
+				variant = "u";
+
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/cmnv%02x%s.bin", rom_ver, variant);
+			break;
 		case QCA_WCN3990:
 		case QCA_WCN3991:
 		case QCA_WCN3998:
@@ -947,6 +960,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	 * VsMsftOpCode.
 	 */
 	switch (soc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 9d28c88002257..8f3c1b1c77b3d 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -41,6 +41,9 @@
 
 #define QCA_WCN3991_SOC_ID		0x40014320
 
+#define QCA_WCN3950_SOC_ID_T		0x40074130
+#define QCA_WCN3950_SOC_ID_S		0x40075130
+
 /* QCA chipset version can be decided by patch and SoC
  * version, combination with upper 2 bytes from SoC
  * and lower 2 bytes from patch will be used.
@@ -145,6 +148,7 @@ enum qca_btsoc_type {
 	QCA_INVALID = -1,
 	QCA_AR3002,
 	QCA_ROME,
+	QCA_WCN3950,
 	QCA_WCN3988,
 	QCA_WCN3990,
 	QCA_WCN3998,
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d2fd08aceb179..f2558506a02c7 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -623,6 +623,7 @@ static int qca_open(struct hci_uart *hu)
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 
 		switch (qcadev->btsoc_type) {
+		case QCA_WCN3950:
 		case QCA_WCN3988:
 		case QCA_WCN3990:
 		case QCA_WCN3991:
@@ -1366,6 +1367,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 
 	/* Give the controller time to process the request */
 	switch (qca_soc_type(hu)) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1452,6 +1454,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
 static int qca_check_speeds(struct hci_uart *hu)
 {
 	switch (qca_soc_type(hu)) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1494,6 +1497,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		 * changing the baudrate of chip and host.
 		 */
 		switch (soc_type) {
+		case QCA_WCN3950:
 		case QCA_WCN3988:
 		case QCA_WCN3990:
 		case QCA_WCN3991:
@@ -1528,6 +1532,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 
 error:
 		switch (soc_type) {
+		case QCA_WCN3950:
 		case QCA_WCN3988:
 		case QCA_WCN3990:
 		case QCA_WCN3991:
@@ -1746,6 +1751,7 @@ static int qca_regulator_init(struct hci_uart *hu)
 	}
 
 	switch (soc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1776,6 +1782,7 @@ static int qca_regulator_init(struct hci_uart *hu)
 	qca_set_speed(hu, QCA_INIT_SPEED);
 
 	switch (soc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1807,6 +1814,7 @@ static int qca_power_on(struct hci_dev *hdev)
 		return 0;
 
 	switch (soc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1891,6 +1899,7 @@ static int qca_setup(struct hci_uart *hu)
 		soc_name = "qca2066";
 		break;
 
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1925,6 +1934,7 @@ static int qca_setup(struct hci_uart *hu)
 	clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
 
 	switch (soc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -1958,6 +1968,7 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	switch (soc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -2046,6 +2057,17 @@ static const struct hci_uart_proto qca_proto = {
 	.dequeue	= qca_dequeue,
 };
 
+static const struct qca_device_data qca_soc_data_wcn3950 __maybe_unused = {
+	.soc_type = QCA_WCN3950,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 15000  },
+		{ "vddxo", 60000  },
+		{ "vddrf", 155000 },
+		{ "vddch0", 585000 },
+	},
+	.num_vregs = 4,
+};
+
 static const struct qca_device_data qca_soc_data_wcn3988 __maybe_unused = {
 	.soc_type = QCA_WCN3988,
 	.vregs = (struct qca_vreg []) {
@@ -2338,6 +2360,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		qcadev->btsoc_type = QCA_ROME;
 
 	switch (qcadev->btsoc_type) {
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -2375,6 +2398,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			break;
 		}
 		fallthrough;
+	case QCA_WCN3950:
 	case QCA_WCN3988:
 	case QCA_WCN3990:
 	case QCA_WCN3991:
@@ -2683,6 +2707,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,qca6174-bt" },
 	{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
 	{ .compatible = "qcom,qca9377-bt" },
+	{ .compatible = "qcom,wcn3950-bt", .data = &qca_soc_data_wcn3950},
 	{ .compatible = "qcom,wcn3988-bt", .data = &qca_soc_data_wcn3988},
 	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
 	{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
-- 
2.39.5


  parent reply	other threads:[~2025-04-03 19:04 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-03 19:01 [PATCH AUTOSEL 6.14 01/54] wifi: ath9k: use unsigned long for activity check timestamp Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 02/54] wifi: ath11k: Fix DMA buffer allocation to resolve SWIOTLB issues Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 03/54] wifi: ath11k: fix memory leak in ath11k_xxx_remove() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 04/54] wifi: ath12k: fix memory leak in ath12k_pci_remove() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 05/54] wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 06/54] wifi: ath12k: Avoid memory leak while enabling statistics Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 07/54] ata: libata-core: Add 'external' to the libata.force kernel parameter Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 08/54] scsi: mpi3mr: Avoid reply queue full condition Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 09/54] scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 10/54] net: page_pool: don't cast mp param to devmem Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 11/54] f2fs: don't retry IO for corrupted data scenario Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 12/54] wifi: mac80211: add strict mode disabling workarounds Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 13/54] wifi: mac80211: ensure sdata->work is canceled before initialized Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 14/54] scsi: target: spc: Fix RSOC parameter data header size Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 15/54] net: usb: asix_devices: add FiberGecko DeviceID Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 16/54] page_pool: avoid infinite loop to schedule delayed worker Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 17/54] can: flexcan: Add quirk to handle separate interrupt lines for mailboxes Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 18/54] can: flexcan: add NXP S32G2/S32G3 SoC support Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 19/54] jfs: Fix uninit-value access of imap allocated in the diMount() function Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 20/54] mptcp: move the whole rx path under msk socket lock protection Sasha Levin
2025-04-10 11:05   ` Matthieu Baerts
2025-04-14  0:12     ` Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 21/54] fs/jfs: cast inactags to s64 to prevent potential overflow Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 22/54] fs/jfs: Prevent integer overflow in AG size calculation Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 23/54] jfs: Prevent copying of nlink with value 0 from disk inode Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 24/54] jfs: add sanity check for agwidth in dbMount Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 25/54] wifi: rtw88: Add support for Mercusys MA30N and D-Link DWA-T185 rev. A1 Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 26/54] ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 27/54] net: sfp: add quirk for 2.5G OEM BX SFP Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 28/54] wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 29/54] null_blk: replace null_process_cmd() call in null_zone_write() Sasha Levin
2025-04-04  3:31   ` Shinichiro Kawasaki
2025-04-14  0:12     ` Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 30/54] f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 31/54] net: sfp: add quirk for FS SFP-10GM-T copper SFP+ module Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 32/54] ahci: add PCI ID for Marvell 88SE9215 SATA Controller Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 33/54] ext4: protect ext4_release_dquot against freezing Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 34/54] Revert "f2fs: rebuild nat_bits during umount" Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 35/54] wifi: mac80211: fix userspace_selectors corruption Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 36/54] ext4: ignore xattrs past end Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 37/54] cdc_ether|r8152: ThinkPad Hybrid USB-C/A Dock quirk Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 38/54] scsi: st: Fix array overflow in st_setup() Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 39/54] ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 40/54] btrfs: reject out-of-band dirty folios during writeback Sasha Levin
2025-04-03 19:37   ` David Sterba
2025-04-14  0:11     ` Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 41/54] btrfs: harden block_group::bg_list against list_del() races Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 42/54] wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 43/54] net: vlan: don't propagate flags on open Sasha Levin
2025-04-03 19:01 ` [PATCH AUTOSEL 6.14 44/54] tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 45/54] Bluetooth: btusb: Add new VID/PID for WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 46/54] Bluetooth: btintel_pcie: Add device id of Whale Peak Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 47/54] Bluetooth: btusb: Add 13 USB device IDs for Qualcomm WCN785x Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 48/54] Bluetooth: hci_uart: fix race during initialization Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 49/54] Bluetooth: btusb: Add 2 HWIDs for MT7922 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 50/54] Bluetooth: hci_qca: use the power sequencer for wcn6750 Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 51/54] Bluetooth: qca: simplify WCN399x NVM loading Sasha Levin
2025-04-03 19:02 ` Sasha Levin [this message]
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 53/54] Bluetooth: Add quirk for broken READ_VOICE_SETTING Sasha Levin
2025-04-03 19:02 ` [PATCH AUTOSEL 6.14 54/54] Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250403190209.2675485-52-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=luiz.von.dentz@intel.com \
    --cc=marcel@holtmann.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).