Linux kernel -stable discussions
 help / color / mirror / Atom feed
From: Vishal Annapurve <vannapurve@google.com>
To: stable@vger.kernel.org
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	 Kuppuswamy Sathyanarayanan
	<sathyanarayanan.kuppuswamy@linux.intel.com>,
	 Vishal Annapurve <vannapurve@google.com>,
	Ingo Molnar <mingo@kernel.org>,  Andi Kleen <ak@linux.intel.com>,
	Tony Luck <tony.luck@intel.com>,  Juergen Gross <jgross@suse.com>,
	Ryan Afranji <afranji@google.com>,
	Andy Lutomirski <luto@kernel.org>,
	 Brian Gerst <brgerst@gmail.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	 Linus Torvalds <torvalds@linux-foundation.org>,
	Josh Poimboeuf <jpoimboe@redhat.com>,
	stable@kernel.org
Subject: [PATCH 6.6.y] x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
Date: Tue,  8 Apr 2025 13:29:37 +0000	[thread overview]
Message-ID: <20250408132937.4178015-1-vannapurve@google.com> (raw)
In-Reply-To: <2025040827-discern-goldmine-da71@gregkh>

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
other VM guest types, features supported under CONFIG_PARAVIRT
are self sufficient. CONFIG_PARAVIRT mainly provides support for
TLB flush operations and time related operations.

For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
most of its requirement except the need of HLT and SAFE_HLT
paravirt calls, which is currently defined under
CONFIG_PARAVIRT_XXL.

Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
like platforms, move HLT and SAFE_HLT paravirt calls under
CONFIG_PARAVIRT.

Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
break any functionality for current users of CONFIG_PARAVIRT.

Fixes: bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests")
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Ryan Afranji <afranji@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250228014416.3925664-2-vannapurve@google.com
(cherry picked from commit 22cc5ca5de52bbfc36a7d4a55323f91fb4492264)
---
 arch/x86/include/asm/irqflags.h       | 40 +++++++++++++++------------
 arch/x86/include/asm/paravirt.h       | 20 +++++++-------
 arch/x86/include/asm/paravirt_types.h |  3 +-
 arch/x86/kernel/paravirt.c            | 14 ++++++----
 4 files changed, 41 insertions(+), 36 deletions(-)

diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 8c5ae649d2df..9acfe2bcf1fd 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -56,6 +56,28 @@ static __always_inline void native_halt(void)
 
 #endif
 
+#ifndef CONFIG_PARAVIRT
+#ifndef __ASSEMBLY__
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static __always_inline void arch_safe_halt(void)
+{
+	native_safe_halt();
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static __always_inline void halt(void)
+{
+	native_halt();
+}
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
 #ifdef CONFIG_PARAVIRT_XXL
 #include <asm/paravirt.h>
 #else
@@ -77,24 +99,6 @@ static __always_inline void arch_local_irq_enable(void)
 	native_irq_enable();
 }
 
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static __always_inline void arch_safe_halt(void)
-{
-	native_safe_halt();
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static __always_inline void halt(void)
-{
-	native_halt();
-}
-
 /*
  * For spinlocks, etc:
  */
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 6c8ff12140ae..d8537e30cee1 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -103,6 +103,16 @@ static inline void notify_page_enc_status_changed(unsigned long pfn,
 	PVOP_VCALL3(mmu.notify_page_enc_status_changed, pfn, npages, enc);
 }
 
+static __always_inline void arch_safe_halt(void)
+{
+	PVOP_VCALL0(irq.safe_halt);
+}
+
+static inline void halt(void)
+{
+	PVOP_VCALL0(irq.halt);
+}
+
 #ifdef CONFIG_PARAVIRT_XXL
 static inline void load_sp0(unsigned long sp0)
 {
@@ -168,16 +178,6 @@ static inline void __write_cr4(unsigned long x)
 	PVOP_VCALL1(cpu.write_cr4, x);
 }
 
-static __always_inline void arch_safe_halt(void)
-{
-	PVOP_VCALL0(irq.safe_halt);
-}
-
-static inline void halt(void)
-{
-	PVOP_VCALL0(irq.halt);
-}
-
 extern noinstr void pv_native_wbinvd(void);
 
 static __always_inline void wbinvd(void)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 772d03487520..4149df559aae 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -130,10 +130,9 @@ struct pv_irq_ops {
 	struct paravirt_callee_save save_fl;
 	struct paravirt_callee_save irq_disable;
 	struct paravirt_callee_save irq_enable;
-
+#endif
 	void (*safe_halt)(void);
 	void (*halt)(void);
-#endif
 } __no_randomize_layout;
 
 struct pv_mmu_ops {
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 8d51c86caa41..234851fe0ef8 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -142,6 +142,11 @@ int paravirt_disable_iospace(void)
 	return request_resource(&ioport_resource, &reserve_ioports);
 }
 
+static noinstr void pv_native_safe_halt(void)
+{
+	native_safe_halt();
+}
+
 #ifdef CONFIG_PARAVIRT_XXL
 static noinstr void pv_native_write_cr2(unsigned long val)
 {
@@ -162,11 +167,6 @@ noinstr void pv_native_wbinvd(void)
 {
 	native_wbinvd();
 }
-
-static noinstr void pv_native_safe_halt(void)
-{
-	native_safe_halt();
-}
 #endif
 
 struct pv_info pv_info = {
@@ -224,9 +224,11 @@ struct paravirt_patch_template pv_ops = {
 	.irq.save_fl		= __PV_IS_CALLEE_SAVE(pv_native_save_fl),
 	.irq.irq_disable	= __PV_IS_CALLEE_SAVE(pv_native_irq_disable),
 	.irq.irq_enable		= __PV_IS_CALLEE_SAVE(pv_native_irq_enable),
+#endif /* CONFIG_PARAVIRT_XXL */
+
+	/* Irq HLT ops. */
 	.irq.safe_halt		= pv_native_safe_halt,
 	.irq.halt		= native_halt,
-#endif /* CONFIG_PARAVIRT_XXL */
 
 	/* Mmu ops. */
 	.mmu.flush_tlb_user	= native_flush_tlb_local,
-- 
2.49.0.504.g3bcea36a83-goog


  reply	other threads:[~2025-04-08 13:29 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-08  7:00 FAILED: patch "[PATCH] x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT" failed to apply to 6.6-stable tree gregkh
2025-04-08 13:29 ` Vishal Annapurve [this message]
2025-04-10 15:53   ` [PATCH 6.6.y] x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250408132937.4178015-1-vannapurve@google.com \
    --to=vannapurve@google.com \
    --cc=afranji@google.com \
    --cc=ak@linux.intel.com \
    --cc=brgerst@gmail.com \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=jpoimboe@redhat.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=luto@kernel.org \
    --cc=mingo@kernel.org \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=stable@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tony.luck@intel.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox