[PATCH 6.1.y v2 4/4] net: dsa: mv88e6xxx: enable STU methods for 6320 family

["Marek Behún" <kabel@kernel.org>]

commit 1428a6109b20e356188c3fb027bdb7998cc2fb98 upstream.

Commit c050f5e91b47 ("net: dsa: mv88e6xxx: Fill in STU support for all
supported chips") introduced STU methods, but did not add them to the
6320 family. Fix it.

Fixes: c050f5e91b47 ("net: dsa: mv88e6xxx: Fill in STU support for all supported chips")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-6-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 96b989e336ae..29e4c94c8405 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -5200,6 +5200,8 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
 	.reset = mv88e6352_g1_reset,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
+	.stu_getnext = mv88e6352_g1_stu_getnext,
+	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.avb_ops = &mv88e6352_avb_ops,
 	.ptp_ops = &mv88e6352_ptp_ops,
@@ -5248,6 +5250,8 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
 	.reset = mv88e6352_g1_reset,
 	.vtu_getnext = mv88e6352_g1_vtu_getnext,
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
+	.stu_getnext = mv88e6352_g1_stu_getnext,
+	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.avb_ops = &mv88e6352_avb_ops,
 	.ptp_ops = &mv88e6352_ptp_ops,
@@ -6218,6 +6222,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.internal_phys_offset = 3,
 		.num_gpio = 15,
 		.max_vid = 4095,
+		.max_sid = 63,
 		.port_base_addr = 0x10,
 		.phy_base_addr = 0x0,
 		.global1_addr = 0x1b,
@@ -6244,6 +6249,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		.internal_phys_offset = 3,
 		.num_gpio = 15,
 		.max_vid = 4095,
+		.max_sid = 63,
 		.port_base_addr = 0x10,
 		.phy_base_addr = 0x0,
 		.global1_addr = 0x1b,
-- 
2.49.0