* + x86-kexec-fix-potential-cmem-ranges-out-of-bounds.patch added to mm-hotfixes-unstable branch
@ 2025-05-08 6:01 Andrew Morton
0 siblings, 0 replies; only message in thread
From: Andrew Morton @ 2025-05-08 6:01 UTC (permalink / raw)
To: mm-commits, x86, vgoyal, stable, dyoung, coxu, bhe, fuqiang.wang,
akpm
The patch titled
Subject: x86/kexec: fix potential cmem->ranges out of bounds
has been added to the -mm mm-hotfixes-unstable branch. Its filename is
x86-kexec-fix-potential-cmem-ranges-out-of-bounds.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/x86-kexec-fix-potential-cmem-ranges-out-of-bounds.patch
This patch will later appear in the mm-hotfixes-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: fuqiang wang <fuqiang.wang@easystack.cn>
Subject: x86/kexec: fix potential cmem->ranges out of bounds
Date: Mon, 8 Jan 2024 21:06:47 +0800
In memmap_exclude_ranges(), elfheader will be excluded from crashk_res.
In the current x86 architecture code, the elfheader is always allocated
at crashk_res.start. It seems that there won't be a new split range.
But it depends on the allocation position of elfheader in crashk_res. To
avoid potential out of bounds in future, add a extra slot.
The similar issue also exists in fill_up_crash_elf_data(). The range to
be excluded is [0, 1M], start (0) is special and will not appear in the
middle of existing cmem->ranges[]. But in cast the low 1M could be
changed in the future, add a extra slot too.
Without this patch, kdump kernel will fail to be loaded by
kexec_file_load,
[ 139.736948] UBSAN: array-index-out-of-bounds in arch/x86/kernel/crash.c:350:25
[ 139.742360] index 0 is out of range for type 'range [*]'
[ 139.745695] CPU: 0 UID: 0 PID: 5778 Comm: kexec Not tainted 6.15.0-0.rc3.20250425git02ddfb981de8.32.fc43.x86_64 #1 PREEMPT(lazy)
[ 139.745698] Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
[ 139.745699] Call Trace:
[ 139.745700] <TASK>
[ 139.745701] dump_stack_lvl+0x5d/0x80
[ 139.745706] ubsan_epilogue+0x5/0x2b
[ 139.745709] __ubsan_handle_out_of_bounds.cold+0x54/0x59
[ 139.745711] crash_setup_memmap_entries+0x2d9/0x330
[ 139.745716] setup_boot_parameters+0xf8/0x6a0
[ 139.745720] bzImage64_load+0x41b/0x4e0
[ 139.745722] ? find_next_iomem_res+0x109/0x140
[ 139.745727] ? locate_mem_hole_callback+0x109/0x170
[ 139.745737] kimage_file_alloc_init+0x1ef/0x3e0
[ 139.745740] __do_sys_kexec_file_load+0x180/0x2f0
[ 139.745742] do_syscall_64+0x7b/0x160
[ 139.745745] ? do_user_addr_fault+0x21a/0x690
[ 139.745747] ? exc_page_fault+0x7e/0x1a0
[ 139.745749] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 139.745751] RIP: 0033:0x7f7712c84e4d
Previously discussed link:
[1] https://lore.kernel.org/kexec/ZXk2oBf%2FT1Ul6o0c@MiWiFi-R3L-srv/
[2] https://lore.kernel.org/kexec/273284e8-7680-4f5f-8065-c5d780987e59@easystack.cn/
[3] https://lore.kernel.org/kexec/ZYQ6O%2F57sHAPxTHm@MiWiFi-R3L-srv/
Link: https://lkml.kernel.org/r/20240108130720.228478-1-fuqiang.wang@easystack.cn
Signed-off-by: fuqiang wang <fuqiang.wang@easystack.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Reported-by: Coiby Xu <coxu@redhat.com>
Closes: https://lkml.kernel.org/r/4de3c2onosr7negqnfhekm4cpbklzmsimgdfv33c52dktqpza5@z5pb34ghz4at
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: <x86@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/x86/kernel/crash.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
--- a/arch/x86/kernel/crash.c~x86-kexec-fix-potential-cmem-ranges-out-of-bounds
+++ a/arch/x86/kernel/crash.c
@@ -165,8 +165,18 @@ static struct crash_mem *fill_up_crash_e
/*
* Exclusion of crash region and/or crashk_low_res may cause
* another range split. So add extra two slots here.
+ *
+ * Exclusion of low 1M may not cause another range split, because the
+ * range of exclude is [0, 1M] and the condition for splitting a new
+ * region is that the start, end parameters are both in a certain
+ * existing region in cmem and cannot be equal to existing region's
+ * start or end. Obviously, the start of [0, 1M] cannot meet this
+ * condition.
+ *
+ * But in order to lest the low 1M could be changed in the future,
+ * (e.g. [stare, 1M]), add a extra slot.
*/
- nr_ranges += 2;
+ nr_ranges += 3;
cmem = vzalloc(struct_size(cmem, ranges, nr_ranges));
if (!cmem)
return NULL;
@@ -298,9 +308,16 @@ int crash_setup_memmap_entries(struct ki
struct crash_memmap_data cmd;
struct crash_mem *cmem;
- cmem = vzalloc(struct_size(cmem, ranges, 1));
+ /*
+ * In the current x86 architecture code, the elfheader is always
+ * allocated at crashk_res.start. But it depends on the allocation
+ * position of elfheader in crashk_res. To avoid potential out of
+ * bounds in future, add a extra slot.
+ */
+ cmem = vzalloc(struct_size(cmem, ranges, 2));
if (!cmem)
return -ENOMEM;
+ cmem->max_nr_ranges = 2;
memset(&cmd, 0, sizeof(struct crash_memmap_data));
cmd.params = params;
_
Patches currently in -mm which might be from fuqiang.wang@easystack.cn are
x86-kexec-fix-potential-cmem-ranges-out-of-bounds.patch
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2025-05-08 6:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-05-08 6:01 + x86-kexec-fix-potential-cmem-ranges-out-of-bounds.patch added to mm-hotfixes-unstable branch Andrew Morton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox