[PATCH 6.1 02/92] arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wojciech Dubowik <Wojciech.Dubowik@mt.com>

commit 5591ce0069ddda97cdbbea596bed53e698f399c2 upstream.

Define vqmmc regulator-gpio for usdhc2 with vin-supply
coming from LDO5.

Without this definition LDO5 will be powered down, disabling
SD card after bootup. This has been introduced in commit
f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5").

Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Tested-by: Manuel Traut <manuel.traut@mt.com>
Reviewed-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@mt.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi |   25 ++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -144,6 +144,19 @@
 		startup-delay-us = <20000>;
 	};
 
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "PMIC_USDHC_VSELECT";
+		vin-supply = <&reg_nvcc_sd>;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -262,7 +275,7 @@
 			  "SODIMM_19",
 			  "",
 			  "",
-			  "",
+			  "PMIC_USDHC_VSELECT",
 			  "",
 			  "",
 			  "",
@@ -788,6 +801,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
 };
 
 &wdog1 {
@@ -1210,13 +1224,17 @@
 			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
 	};
 
+	pinctrl_usdhc2_vsel: usdhc2vselgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x10>; /* PMIC_USDHC_VSELECT */
+	};
+
 	/*
 	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
 	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
 	 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
@@ -1227,7 +1245,6 @@
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
@@ -1238,7 +1255,6 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
@@ -1250,7 +1266,6 @@
 	/* Avoid backfeeding with removed card power */
 	pinctrl_usdhc2_sleep: usdhc2slpgrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
 			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
 			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
 			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,