From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: stable@vger.kernel.org
Cc: "Mathias Nyman" <mathias.nyman@linux.intel.com>,
"Łukasz Bartosik" <ukaszb@chromium.org>
Subject: [PATCH] xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive.
Date: Wed, 14 May 2025 15:47:47 +0300 [thread overview]
Message-ID: <20250514124748.168922-1-mathias.nyman@linux.intel.com> (raw)
[ Upstream commit cab63934c33b12c0d1e9f4da7450928057f2c142 ]
Backport for linux-6.12.y stable
6.12 kernel used older poll_interval of 1ms instead of 0 as described
in the original commit message below.
CPU hogging is not that bad with 1ms delay, fix it anyways, but don't
touch poll_interval.
Event polling delay is set to 0 if there are any pending requests in
either rx or tx requests lists. Checking for pending requests does
not work well for "IN" transfers as the tty driver always queues
requests to the list and TRBs to the ring, preparing to receive data
from the host.
This causes unnecessary busylooping and cpu hogging.
Only set the event polling delay to 0 if there are pending tx "write"
transfers, or if it was less than 10ms since last active data transfer
in any direction.
Cc: Łukasz Bartosik <ukaszb@chromium.org>
Fixes: fb18e5bb9660 ("xhci: dbc: poll at different rate depending on data transfer activity")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-dbgcap.c | 19 ++++++++++++++++---
drivers/usb/host/xhci-dbgcap.h | 3 +++
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c
index 241d7aa1fbc2..b12273f72c93 100644
--- a/drivers/usb/host/xhci-dbgcap.c
+++ b/drivers/usb/host/xhci-dbgcap.c
@@ -822,6 +822,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
{
dma_addr_t deq;
union xhci_trb *evt;
+ enum evtreturn ret = EVT_DONE;
u32 ctrl, portsc;
bool update_erdp = false;
@@ -906,6 +907,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
break;
case TRB_TYPE(TRB_TRANSFER):
dbc_handle_xfer_event(dbc, evt);
+ ret = EVT_XFER_DONE;
break;
default:
break;
@@ -924,7 +926,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc)
lo_hi_writeq(deq, &dbc->regs->erdp);
}
- return EVT_DONE;
+ return ret;
}
static void xhci_dbc_handle_events(struct work_struct *work)
@@ -933,6 +935,7 @@ static void xhci_dbc_handle_events(struct work_struct *work)
struct xhci_dbc *dbc;
unsigned long flags;
unsigned int poll_interval;
+ unsigned long busypoll_timelimit;
dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work);
poll_interval = dbc->poll_interval;
@@ -951,11 +954,21 @@ static void xhci_dbc_handle_events(struct work_struct *work)
dbc->driver->disconnect(dbc);
break;
case EVT_DONE:
- /* set fast poll rate if there are pending data transfers */
+ /*
+ * Set fast poll rate if there are pending out transfers, or
+ * a transfer was recently processed
+ */
+ busypoll_timelimit = dbc->xfer_timestamp +
+ msecs_to_jiffies(DBC_XFER_INACTIVITY_TIMEOUT);
+
if (!list_empty(&dbc->eps[BULK_OUT].list_pending) ||
- !list_empty(&dbc->eps[BULK_IN].list_pending))
+ time_is_after_jiffies(busypoll_timelimit))
poll_interval = 1;
break;
+ case EVT_XFER_DONE:
+ dbc->xfer_timestamp = jiffies;
+ poll_interval = 1;
+ break;
default:
dev_info(dbc->dev, "stop handling dbc events\n");
return;
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 9dc8f4d8077c..47ac72c2286d 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -96,6 +96,7 @@ struct dbc_ep {
#define DBC_WRITE_BUF_SIZE 8192
#define DBC_POLL_INTERVAL_DEFAULT 64 /* milliseconds */
#define DBC_POLL_INTERVAL_MAX 5000 /* milliseconds */
+#define DBC_XFER_INACTIVITY_TIMEOUT 10 /* milliseconds */
/*
* Private structure for DbC hardware state:
*/
@@ -142,6 +143,7 @@ struct xhci_dbc {
enum dbc_state state;
struct delayed_work event_work;
unsigned int poll_interval; /* ms */
+ unsigned long xfer_timestamp;
unsigned resume_required:1;
struct dbc_ep eps[2];
@@ -187,6 +189,7 @@ struct dbc_request {
enum evtreturn {
EVT_ERR = -1,
EVT_DONE,
+ EVT_XFER_DONE,
EVT_GSER,
EVT_DISC,
};
--
2.43.0
next reply other threads:[~2025-05-14 12:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-14 12:47 Mathias Nyman [this message]
2025-05-14 20:13 ` [PATCH] xhci: dbc: Avoid event polling busyloop if pending rx transfers are inactive Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250514124748.168922-1-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=ukaszb@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox