From: Sasha Levin <sashal@kernel.org>
To: patches@lists.linux.dev, stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>,
Niklas Cassel <cassel@kernel.org>, Christoph Hellwig <hch@lst.de>,
Sasha Levin <sashal@kernel.org>,
sagi@grimberg.me, linux-nvme@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH AUTOSEL 6.14 08/23] nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
Date: Mon, 19 May 2025 17:21:15 -0400 [thread overview]
Message-ID: <20250519212131.1985647-8-sashal@kernel.org> (raw)
In-Reply-To: <20250519212131.1985647-1-sashal@kernel.org>
From: Damien Le Moal <dlemoal@kernel.org>
[ Upstream commit 4236e600bf902202214aa6277e84c4738c56f762 ]
There is no point in taking the controller irq_lock and calling
nvmet_pci_epf_should_raise_irq() for a completion queue which does not
have IRQ enabled (NVMET_PCI_EPF_Q_IRQ_ENABLED flag is not set).
Move the test for the NVMET_PCI_EPF_Q_IRQ_ENABLED flag out of
nvmet_pci_epf_should_raise_irq() to the top of nvmet_pci_epf_raise_irq()
to return early when no IRQ should be raised.
Also, use dev_err_ratelimited() to avoid a message storm under load when
raising IRQs is failing.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/nvme/target/pci-epf.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/target/pci-epf.c b/drivers/nvme/target/pci-epf.c
index bc1daa9aede9d..80d857798bddd 100644
--- a/drivers/nvme/target/pci-epf.c
+++ b/drivers/nvme/target/pci-epf.c
@@ -596,9 +596,6 @@ static bool nvmet_pci_epf_should_raise_irq(struct nvmet_pci_epf_ctrl *ctrl,
struct nvmet_pci_epf_irq_vector *iv = cq->iv;
bool ret;
- if (!test_bit(NVMET_PCI_EPF_Q_IRQ_ENABLED, &cq->flags))
- return false;
-
/* IRQ coalescing for the admin queue is not allowed. */
if (!cq->qid)
return true;
@@ -625,7 +622,8 @@ static void nvmet_pci_epf_raise_irq(struct nvmet_pci_epf_ctrl *ctrl,
struct pci_epf *epf = nvme_epf->epf;
int ret = 0;
- if (!test_bit(NVMET_PCI_EPF_Q_LIVE, &cq->flags))
+ if (!test_bit(NVMET_PCI_EPF_Q_LIVE, &cq->flags) ||
+ !test_bit(NVMET_PCI_EPF_Q_IRQ_ENABLED, &cq->flags))
return;
mutex_lock(&ctrl->irq_lock);
@@ -656,7 +654,9 @@ static void nvmet_pci_epf_raise_irq(struct nvmet_pci_epf_ctrl *ctrl,
}
if (ret)
- dev_err(ctrl->dev, "Failed to raise IRQ (err=%d)\n", ret);
+ dev_err_ratelimited(ctrl->dev,
+ "CQ[%u]: Failed to raise IRQ (err=%d)\n",
+ cq->qid, ret);
unlock:
mutex_unlock(&ctrl->irq_lock);
--
2.39.5
next prev parent reply other threads:[~2025-05-19 21:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-19 21:21 [PATCH AUTOSEL 6.14 01/23] dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 02/23] HID: amd_sfh: Avoid clearing reports for SRA sensor Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 03/23] HID: quirks: Add ADATA XPG alpha wireless mouse support Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 04/23] nfs: don't share pNFS DS connections between net namespaces Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 05/23] platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 06/23] kbuild: Require pahole <v1.28 or >v1.29 with GENDWARFKSYMS on X86 Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 07/23] um: let 'make clean' properly clean underlying SUBARCH as well Sasha Levin
2025-05-19 21:21 ` Sasha Levin [this message]
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 09/23] gpio: virtuser: fix potential out-of-bound write Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 10/23] drm/amd/display: fix link_set_dpms_off multi-display MST corner case Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 11/23] drm/amd/display: check stream id dml21 wrapper to get plane_id Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 12/23] nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 13/23] phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 14/23] phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 15/23] spi: spi-sun4i: fix early activation Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 16/23] phy: renesas: rcar-gen3-usb2: Move IRQ request in probe Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 17/23] nvme: all namespaces in a subsystem must adhere to a common atomic write size Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 18/23] nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 19/23] drm/xe/xe2hpg: Add Wa_22021007897 Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 20/23] drm/xe: Save the gt pointer in lrc and drop the tile Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 21/23] char: tpm: tpm-buf: Add sanity check fallback in read helpers Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 22/23] tpm: tis: Double the timeout B to 4s Sasha Levin
2025-05-19 21:21 ` [PATCH AUTOSEL 6.14 23/23] NFS: Avoid flushing data while holding directory locks in nfs_rename() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250519212131.1985647-8-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=cassel@kernel.org \
--cc=dlemoal@kernel.org \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=patches@lists.linux.dev \
--cc=sagi@grimberg.me \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox