FAILED: patch "[PATCH] gpio: pca953x: fix IRQ storm on system wake up" failed to apply to 5.15-stable tree

FAILED: patch "[PATCH] gpio: pca953x: fix IRQ storm on system wake up" failed to apply to 5.15-stable tree

[gregkh]

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 3e38f946062b4845961ab86b726651b4457b2af8
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2025051942-diagnoses-sequence-8a2a@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3e38f946062b4845961ab86b726651b4457b2af8 Mon Sep 17 00:00:00 2001
From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Date: Mon, 12 May 2025 11:54:41 +0200
Subject: [PATCH] gpio: pca953x: fix IRQ storm on system wake up

If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.

As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.

Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.

An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.

Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 442435ded020..13cc120cf11f 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -1204,6 +1204,8 @@ static int pca953x_restore_context(struct pca953x_chip *chip)
 
 	guard(mutex)(&chip->i2c_lock);
 
+	if (chip->client->irq > 0)
+		enable_irq(chip->client->irq);
 	regcache_cache_only(chip->regmap, false);
 	regcache_mark_dirty(chip->regmap);
 	ret = pca953x_regcache_sync(chip);
@@ -1216,6 +1218,10 @@ static int pca953x_restore_context(struct pca953x_chip *chip)
 static void pca953x_save_context(struct pca953x_chip *chip)
 {
 	guard(mutex)(&chip->i2c_lock);
+
+	/* Disable IRQ to prevent early triggering while regmap "cache only" is on */
+	if (chip->client->irq > 0)
+		disable_irq(chip->client->irq);
 	regcache_cache_only(chip->regmap, true);
 }
 

[PATCH 5.15.y] gpio: pca953x: fix IRQ storm on system wake up

[Sasha Levin]

From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>

[ Upstream commit 3e38f946062b4845961ab86b726651b4457b2af8 ]

If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.

As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.

Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.

An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.

Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250512095441.31645-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[ Apply directly to suspend/resume functions ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-pca953x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 45f3836c4f0fa..a8f6ef4006fef 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -1145,6 +1145,9 @@ static int pca953x_suspend(struct device *dev)
 	struct pca953x_chip *chip = dev_get_drvdata(dev);
 
 	mutex_lock(&chip->i2c_lock);
+	/* Disable IRQ to prevent early triggering while regmap "cache only" is on */
+	if (chip->client->irq > 0)
+		disable_irq(chip->client->irq);
 	regcache_cache_only(chip->regmap, true);
 	mutex_unlock(&chip->i2c_lock);
 
@@ -1170,6 +1173,8 @@ static int pca953x_resume(struct device *dev)
 	}
 
 	mutex_lock(&chip->i2c_lock);
+	if (chip->client->irq > 0)
+		enable_irq(chip->client->irq);
 	regcache_cache_only(chip->regmap, false);
 	regcache_mark_dirty(chip->regmap);
 	ret = pca953x_regcache_sync(dev);
-- 
2.50.1